Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 2.040086] ACPI: Power Resource [LPP] (on)
- [ 2.043069] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
- [ 2.043073] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 2.044413] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
- [ 2.044414] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
- [ 2.044765] PCI host bridge to bus 0000:00
- [ 2.044767] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 2.044768] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 2.044769] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 2.044771] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window]
- [ 2.044772] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window]
- [ 2.044773] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
- [ 2.044774] pci_bus 0000:00: root bus resource [bus 00-fe]
- [ 2.044781] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
- [ 2.044888] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
- [ 2.044901] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
- [ 2.044907] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 2.044912] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
- [ 2.045019] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
- [ 2.045031] pci 0000:00:03.0: reg 0x10: [mem 0xd0910000-0xd0913fff 64bit]
- [ 2.045156] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
- [ 2.045180] pci 0000:00:14.0: reg 0x10: [mem 0xd0900000-0xd090ffff 64bit]
- [ 2.045228] pci 0000:00:14.0: PME# supported from D3hot D3cold
- [ 2.045283] pci 0000:00:14.0: System wakeup disabled by ACPI
- [ 2.045320] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
- [ 2.045346] pci 0000:00:16.0: reg 0x10: [mem 0xd0919000-0xd091900f 64bit]
- [ 2.045404] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 2.045500] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
- [ 2.045526] pci 0000:00:1a.0: reg 0x10: [mem 0xd091e000-0xd091e3ff]
- [ 2.045602] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 2.045658] pci 0000:00:1a.0: System wakeup disabled by ACPI
- [ 2.045695] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
- [ 2.045720] pci 0000:00:1b.0: reg 0x10: [mem 0xd0914000-0xd0917fff 64bit]
- [ 2.045782] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 2.045870] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
- [ 2.045941] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 2.046060] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
- [ 2.046130] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 2.046216] pci 0000:00:1c.5: System wakeup disabled by ACPI
- [ 2.046250] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
- [ 2.046320] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
- [ 2.046399] pci 0000:00:1c.6: System wakeup disabled by ACPI
- [ 2.046434] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
- [ 2.046504] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
- [ 2.046583] pci 0000:00:1c.7: System wakeup disabled by ACPI
- [ 2.046618] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
- [ 2.046645] pci 0000:00:1d.0: reg 0x10: [mem 0xd091d000-0xd091d3ff]
- [ 2.046721] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 2.046777] pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 2.046814] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
- [ 2.046999] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
- [ 2.047020] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
- [ 2.047027] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
- [ 2.047035] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
- [ 2.047042] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
- [ 2.047049] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
- [ 2.047057] pci 0000:00:1f.2: reg 0x24: [mem 0xd091c000-0xd091c7ff]
- [ 2.047088] pci 0000:00:1f.2: PME# supported from D3hot
- [ 2.047218] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 2.047223] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff]
- [ 2.047284] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
- [ 2.047324] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
- [ 2.047352] pci 0000:02:00.0: reg 0x18: [mem 0xd0700000-0xd0700fff 64bit]
- [ 2.047370] pci 0000:02:00.0: reg 0x20: [mem 0xd0400000-0xd0403fff 64bit pref]
- [ 2.047452] pci 0000:02:00.0: supports D1 D2
- [ 2.047453] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 2.047491] pci 0000:02:00.0: System wakeup disabled by ACPI
- [ 2.049167] pci 0000:00:1c.5: PCI bridge to [bus 02]
- [ 2.049170] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
- [ 2.049174] pci 0000:00:1c.5: bridge window [mem 0xd0700000-0xd07fffff]
- [ 2.049179] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
- [ 2.049261] pci 0000:03:00.0: [8086:08b1] type 00 class 0x028000
- [ 2.049344] pci 0000:03:00.0: reg 0x10: [mem 0xd0600000-0xd0601fff 64bit]
- [ 2.049573] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
- [ 2.051182] pci 0000:00:1c.6: PCI bridge to [bus 03]
- [ 2.051187] pci 0000:00:1c.6: bridge window [mem 0xd0600000-0xd06fffff]
- [ 2.051244] pci 0000:04:00.0: [10ec:5227] type 00 class 0xff0000
- [ 2.051280] pci 0000:04:00.0: reg 0x10: [mem 0xd0500000-0xd0500fff]
- [ 2.051403] pci 0000:04:00.0: supports D1 D2
- [ 2.051404] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
- [ 2.053170] pci 0000:00:1c.7: PCI bridge to [bus 04]
- [ 2.053175] pci 0000:00:1c.7: bridge window [mem 0xd0500000-0xd05fffff]
- [ 2.053199] pci_bus 0000:00: on NUMA node 0
- [ 2.053969] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 2.054008] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
- [ 2.054045] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 2.054081] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 2.054118] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 2.054154] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 2.054197] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 2.054232] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 2.054473] ACPI: Enabled 4 GPEs in block 00 to 3F
- [ 2.054512] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
- [ 2.054568] vgaarb: setting as boot device: PCI:0000:00:02.0
- [ 2.054570] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 2.054572] vgaarb: loaded
- [ 2.054573] vgaarb: bridge control possible 0000:00:02.0
- [ 2.054649] SCSI subsystem initialized
- [ 2.054683] libata version 3.00 loaded.
- [ 2.054689] ACPI: bus type USB registered
- [ 2.054705] usbcore: registered new interface driver usbfs
- [ 2.054713] usbcore: registered new interface driver hub
- [ 2.054729] usbcore: registered new device driver usb
- [ 2.054798] PCI: Using ACPI for IRQ routing
- [ 2.060432] PCI: pci_cache_line_size set to 64 bytes
- [ 2.060498] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
- [ 2.060499] e820: reserve RAM buffer [mem 0xb8b7f000-0xbbffffff]
- [ 2.060500] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
- [ 2.060501] e820: reserve RAM buffer [mem 0x43fe00000-0x43fffffff]
- [ 2.060667] clocksource: Switched to clocksource hpet
- [ 2.060761] pnp: PnP ACPI init
- [ 2.060911] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 2.060912] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
- [ 2.060914] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 2.060915] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 2.060916] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
- [ 2.060918] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 2.060920] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 2.060921] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 2.060922] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 2.060923] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved
- [ 2.060926] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 2.061080] system 00:01: [io 0x0200-0x027f] has been reserved
- [ 2.061082] system 00:01: [io 0xffff] has been reserved
- [ 2.061083] system 00:01: [io 0xffff] has been reserved
- [ 2.061084] system 00:01: [io 0xffff] has been reserved
- [ 2.061087] system 00:01: [io 0x1800-0x18fe] could not be reserved
- [ 2.061088] system 00:01: [io 0xef80-0xef9f] has been reserved
- [ 2.061090] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 2.061128] system 00:02: [io 0x0800-0x087f] has been reserved
- [ 2.061129] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 2.061150] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 2.061261] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
- [ 2.061281] pnp 00:05: Plug and Play ACPI device, IDs SYN300f SYN0100 SYN0002 PNP0f13 (active)
- [ 2.061518] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
- [ 2.061520] system 00:06: [mem 0x40004000-0x40004fff] could not be reserved
- [ 2.061522] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 2.061689] system 00:07: [mem 0xfed40000-0xfed44fff window] has been reserved
- [ 2.061691] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 2.061715] pnp: PnP ACPI: found 8 devices
- [ 2.067979] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 2.068010] pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
- [ 2.068013] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
- [ 2.068016] pci 0000:00:1c.7: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
- [ 2.068018] pci 0000:00:1c.7: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
- [ 2.068019] pci 0000:00:1c.7: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
- [ 2.068021] pci 0000:00:1c.7: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
- [ 2.068027] pci 0000:00:1c.7: BAR 15: assigned [mem 0xbf300000-0xbf4fffff 64bit pref]
- [ 2.068029] pci 0000:00:1c.7: BAR 13: assigned [io 0x2000-0x2fff]
- [ 2.068031] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 2.068037] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff]
- [ 2.068045] pci 0000:00:1c.5: PCI bridge to [bus 02]
- [ 2.068047] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
- [ 2.068052] pci 0000:00:1c.5: bridge window [mem 0xd0700000-0xd07fffff]
- [ 2.068056] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
- [ 2.068061] pci 0000:00:1c.6: PCI bridge to [bus 03]
- [ 2.068065] pci 0000:00:1c.6: bridge window [mem 0xd0600000-0xd06fffff]
- [ 2.068073] pci 0000:00:1c.7: PCI bridge to [bus 04]
- [ 2.068075] pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff]
- [ 2.068079] pci 0000:00:1c.7: bridge window [mem 0xd0500000-0xd05fffff]
- [ 2.068083] pci 0000:00:1c.7: bridge window [mem 0xbf300000-0xbf4fffff 64bit pref]
- [ 2.068089] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- [ 2.068091] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- [ 2.068092] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 2.068093] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window]
- [ 2.068094] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window]
- [ 2.068095] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window]
- [ 2.068097] pci_bus 0000:01: resource 1 [mem 0xd0800000-0xd08fffff]
- [ 2.068098] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
- [ 2.068099] pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd07fffff]
- [ 2.068100] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd04fffff 64bit pref]
- [ 2.068101] pci_bus 0000:03: resource 1 [mem 0xd0600000-0xd06fffff]
- [ 2.068102] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
- [ 2.068103] pci_bus 0000:04: resource 1 [mem 0xd0500000-0xd05fffff]
- [ 2.068105] pci_bus 0000:04: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref]
- [ 2.068130] NET: Registered protocol family 2
- [ 2.068248] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 2.068395] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 2.068512] TCP: Hash tables configured (established 131072 bind 65536)
- [ 2.068528] UDP hash table entries: 8192 (order: 6, 262144 bytes)
- [ 2.068560] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
- [ 2.068632] NET: Registered protocol family 1
- [ 2.068645] pci 0000:00:02.0: Video device with shadowed ROM
- [ 2.068652] pci 0000:00:14.0: enabling device (0000 -> 0002)
- [ 2.068767] PCI: CLS 64 bytes, default 64
- [ 2.069624] Trying to unpack rootfs image as initramfs...
- [ 2.894324] Freeing initrd memory: 8388K (ffff880036f8e000 - ffff8800377bf000)
- [ 2.895017] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 2.895019] software IO TLB [mem 0xb4b7f000-0xb8b7f000] (64MB) mapped at [ffff8800b4b7f000-ffff8800b8b7efff]
- [ 2.895087] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
- [ 2.895087] hw unit of domain pp0-core 2^-14 Joules
- [ 2.895088] hw unit of domain package 2^-14 Joules
- [ 2.895089] hw unit of domain dram 2^-14 Joules
- [ 2.895089] hw unit of domain pp1-gpu 2^-14 Joules
- [ 2.895430] futex hash table entries: 2048 (order: 5, 131072 bytes)
- [ 2.895467] audit: initializing netlink subsys (disabled)
- [ 2.895478] audit: type=2000 audit(1458589103.857:1): initialized
- [ 2.897001] zbud: loaded
- [ 2.897147] VFS: Disk quotas dquot_6.6.0
- [ 2.897174] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 2.898295] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- [ 2.898298] io scheduler noop registered
- [ 2.898301] io scheduler deadline registered
- [ 2.898327] io scheduler cfq registered
- [ 2.898370] io scheduler bfq registered (default)
- [ 2.898371] BFQ I/O-scheduler: v7r11
- [ 2.899288] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
- [ 2.899292] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
- [ 2.899312] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
- [ 2.899314] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
- [ 2.899318] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
- [ 2.899335] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
- [ 2.899336] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
- [ 2.899339] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
- [ 2.899356] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
- [ 2.899357] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
- [ 2.899360] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
- [ 2.899366] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 2.899376] intel_idle: MWAIT substates: 0x42120
- [ 2.899377] intel_idle: v0.4 model 0x3C
- [ 2.899377] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 2.899694] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 2.900502] lp: driver loaded but no devices found
- [ 2.900505] Linux agpgart interface v0.103
- [ 2.902861] brd: module loaded
- [ 2.903976] loop: module loaded
- [ 2.904155] ahci 0000:00:1f.2: version 3.0
- [ 2.904294] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x30 impl SATA mode
- [ 2.904296] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
- [ 2.906143] scsi host0: ahci
- [ 2.906224] scsi host1: ahci
- [ 2.906300] scsi host2: ahci
- [ 2.906372] scsi host3: ahci
- [ 2.906445] scsi host4: ahci
- [ 2.906516] scsi host5: ahci
- [ 2.906549] ata1: DUMMY
- [ 2.906550] ata2: DUMMY
- [ 2.906551] ata3: DUMMY
- [ 2.906551] ata4: DUMMY
- [ 2.906554] ata5: SATA max UDMA/133 abar m2048@0xd091c000 port 0xd091c300 irq 28
- [ 2.906556] ata6: SATA max UDMA/133 abar m2048@0xd091c000 port 0xd091c380 irq 28
- [ 2.906580] PPP generic driver version 2.4.2
- [ 2.906670] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.906673] ehci-pci: EHCI PCI platform driver
- [ 2.906776] ehci-pci 0000:00:1a.0: EHCI Host Controller
- [ 2.906807] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 2.906818] ehci-pci 0000:00:1a.0: debug port 2
- [ 2.910708] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- [ 2.910715] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd091e000
- [ 2.916647] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 2.916682] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.916684] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.916685] usb usb1: Product: EHCI Host Controller
- [ 2.916686] usb usb1: Manufacturer: Linux 4.4.3-calculate ehci_hcd
- [ 2.916687] usb usb1: SerialNumber: 0000:00:1a.0
- [ 2.916795] hub 1-0:1.0: USB hub found
- [ 2.916799] hub 1-0:1.0: 2 ports detected
- [ 2.916997] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 2.917049] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 2.917059] ehci-pci 0000:00:1d.0: debug port 2
- [ 2.920961] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- [ 2.920969] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd091d000
- [ 2.926647] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 2.926669] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.926670] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.926671] usb usb2: Product: EHCI Host Controller
- [ 2.926672] usb usb2: Manufacturer: Linux 4.4.3-calculate ehci_hcd
- [ 2.926673] usb usb2: SerialNumber: 0000:00:1d.0
- [ 2.926806] hub 2-0:1.0: USB hub found
- [ 2.926809] hub 2-0:1.0: 2 ports detected
- [ 2.926917] ehci-platform: EHCI generic platform driver
- [ 2.926942] usbcore: registered new interface driver usb-storage
- [ 2.926976] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 2.928789] i8042: Detected active multiplexing controller, rev 1.1
- [ 2.929532] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 2.929558] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 2.929579] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 2.929600] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 2.929620] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 2.929819] mousedev: PS/2 mouse device common for all mice
- [ 2.929977] rtc_cmos 00:03: RTC can wake from S4
- [ 2.930112] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 2.930138] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 2.930151] Intel P-state driver initializing.
- [ 2.930419] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.930810] usbcore: registered new interface driver usbhid
- [ 2.930812] usbhid: USB HID core driver
- [ 2.931037] NET: Registered protocol family 17
- [ 2.931062] Key type dns_resolver registered
- [ 2.931703] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x17
- [ 2.931722] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x17
- [ 2.931763] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x17
- [ 2.931783] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x17
- [ 2.931802] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x17
- [ 2.931822] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x17
- [ 2.931839] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x17
- [ 2.931856] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x17
- [ 2.931926] microcode: Microcode Update Driver: v2.01 <[email protected]>, Peter Oruba
- [ 2.932242] registered taskstats version 1
- [ 2.932314] zswap: loaded using pool lz4/zbud
- [ 2.933362] rtc_cmos 00:03: setting system clock to 2016-03-21 19:38:24 UTC (1458589104)
- [ 2.933503] PM: Hibernation image not present or could not be loaded.
- [ 2.954912] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- [ 3.210696] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3.210714] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 3.215290] ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (unknown) rejected by device (Stat=0x51 Err=0x04)
- [ 3.215295] ata6.00: ATAPI: hp DVD A DU8A5SH, NH62, max UDMA/100
- [ 3.216446] ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (unknown) rejected by device (Stat=0x51 Err=0x04)
- [ 3.216454] ata6.00: configured for UDMA/100
- [ 3.217144] ata5.00: ATA-9: ST1000LM024 HN-M101MBB, 2AR20002, max UDMA/133
- [ 3.217147] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 3.218682] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 3.223586] ata5.00: configured for UDMA/133
- [ 3.223922] scsi 4:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5
- [ 3.224255] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
- [ 3.224258] sd 4:0:0:0: [sda] 4096-byte physical blocks
- [ 3.224405] sd 4:0:0:0: [sda] Write Protect is off
- [ 3.224408] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 3.224437] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.228694] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 3.229496] scsi 5:0:0:0: CD-ROM hp DVD A DU8A5SH NH62 PQ: 0 ANSI: 5
- [ 3.249786] sda: sda1 sda2 sda3
- [ 3.250411] sd 4:0:0:0: [sda] Attached SCSI disk
- [ 3.259301] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 3.259303] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 3.259464] sr 5:0:0:0: Attached scsi CD-ROM sr0
- [ 3.259737] Freeing unused kernel memory: 920K (ffffffff81690000 - ffffffff81776000)
- [ 3.295035] dracut: dracut-040-r3
- [ 3.334997] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
- [ 3.334999] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.335662] hub 1-1:1.0: USB hub found
- [ 3.335738] hub 1-1:1.0: 6 ports detected
- [ 3.343005] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
- [ 3.343008] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.343279] hub 2-1:1.0: USB hub found
- [ 3.343377] hub 2-1:1.0: 8 ports detected
- [ 3.397408] dracut: TuxOnIce premodule started
- [ 3.397484] dracut: Kernel has no tuxonice support, aborting
- [ 3.410010] RPC: Registered named UNIX socket transport module.
- [ 3.410011] RPC: Registered udp transport module.
- [ 3.410012] RPC: Registered tcp transport module.
- [ 3.410012] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 3.428663] NET: Registered protocol family 10
- [ 3.438383] systemd-udevd[1133]: starting version 3.1.5
- [ 3.438599] random: systemd-udevd urandom read with 25 bits of entropy available
- [ 3.448229] dracut: Loading frame buffer video driver
- [ 3.464434] [drm] Initialized drm 1.1.0 20060810
- [ 3.470952] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input9
- [ 3.471006] ACPI: Sleep Button [SLPB]
- [ 3.471101] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input10
- [ 3.471208] ACPI: Lid Switch [LID]
- [ 3.471262] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
- [ 3.471300] ACPI: Power Button [PWRF]
- [ 3.507315] [drm] Memory usable by graphics device = 2048M
- [ 3.507317] [drm] Replacing VGA console driver
- [ 3.513011] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 3.513013] [drm] Driver supports precise vblank timestamp query.
- [ 3.513103] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 3.551997] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 3.552238] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
- [ 3.552324] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
- [ 3.650798] fbcon: inteldrmfb (fb0) is primary device
- [ 3.766033] psmouse serio4: synaptics: queried max coordinates: x [..5716], y [..4886]
- [ 3.803825] psmouse serio4: synaptics: queried min coordinates: x [1220..], y [986..]
- [ 3.876120] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x640000/0xa2400/0x0, board id: 2654, fw id: 1323623
- [ 3.894667] tsc: Refined TSC clocksource calibration: 2194.917 MHz
- [ 3.894669] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37107ca2, max_idle_ns: 440795258165 ns
- [ 3.919811] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
- [ 4.764928] Console: switching to colour frame buffer device 170x48
- [ 4.856947] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- [ 4.867484] dracut: Starting Gentoo Splash
- [ 4.894778] clocksource: Switched to clocksource tsc
- [ 4.927090] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
- [ 4.935000] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 4.935009] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
- [ 4.937100] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 4.937142] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
- [ 4.937568] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000020000, a0:1d:48:b0:3e:6a, XID 0c000800 IRQ 30
- [ 4.937575] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 4.938220] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
- [ 4.938225] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
- [ 4.938355] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 4.938356] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.938357] usb usb3: Product: xHCI Host Controller
- [ 4.938358] usb usb3: Manufacturer: Linux 4.4.3-calculate xhci-hcd
- [ 4.938359] usb usb3: SerialNumber: 0000:00:14.0
- [ 4.938451] hub 3-0:1.0: USB hub found
- [ 4.938468] hub 3-0:1.0: 14 ports detected
- [ 4.939151] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 4.939181] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
- [ 4.939211] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
- [ 4.939212] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.939213] usb usb4: Product: xHCI Host Controller
- [ 4.939214] usb usb4: Manufacturer: Linux 4.4.3-calculate xhci-hcd
- [ 4.939214] usb usb4: SerialNumber: 0000:00:14.0
- [ 4.939288] hub 4-0:1.0: USB hub found
- [ 4.939298] hub 4-0:1.0: 6 ports detected
- [ 4.939514] usb: port power management may be unreliable
- [ 5.219039] PM: Starting manual resume from disk
- [ 5.219041] PM: Hibernation image partition 8:1 present
- [ 5.219042] PM: Looking for hibernation image.
- [ 5.236991] PM: Image not found (code -22)
- [ 5.236993] PM: Hibernation image not present or could not be loaded.
- [ 5.241831] dracut: TuxOnIce lvmfix started
- [ 5.242629] dracut: TuxOnIce udev should be now fully settled
- [ 5.291568] usb 3-5: new full-speed USB device number 2 using xhci_hcd
- [ 5.299151] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
- [ 5.354710] dracut: Remounting /dev/disk/by-uuid/96c2ecd9-56b7-465f-bd79-fd730555f76b with -o noatime,ro
- [ 5.355376] EXT4-fs (sda2): re-mounted. Opts: (null)
- [ 5.400592] random: nonblocking pool is initialized
- [ 5.456770] usb 3-5: New USB device found, idVendor=138a, idProduct=003f
- [ 5.456771] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
- [ 5.456772] usb 3-5: SerialNumber: 00300a3ca492
- [ 5.561480] dracut: Mounted root filesystem /dev/sda2
- [ 5.609575] usb 3-7: new high-speed USB device number 3 using xhci_hcd
- [ 5.837879] dracut: Switching root
- [ 5.860655] usb 3-7: New USB device found, idVendor=04ca, idProduct=7022
- [ 5.860657] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.860659] usb 3-7: Product: HP HD Webcam
- [ 5.860660] usb 3-7: Manufacturer: DDZLD019I5Z0FV
- [ 6.082604] usb 3-12: new full-speed USB device number 4 using xhci_hcd
- [ 6.248136] usb 3-12: New USB device found, idVendor=8087, idProduct=07dc
- [ 6.248139] usb 3-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 8.706819] udevd[2491]: starting version 3.1.5
- [ 9.370972] Initializing HPQ6001 module
- [ 9.371021] input: HP Wireless hotkeys as /devices/virtual/input/input13
- [ 9.503970] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 9.603619] thermal LNXTHERM:00: registered as thermal_zone0
- [ 9.603622] ACPI: Thermal Zone [CPUZ] (41 C)
- [ 9.627402] thermal LNXTHERM:01: registered as thermal_zone1
- [ 9.627403] ACPI: Thermal Zone [GFXZ] (0 C)
- [ 9.642252] thermal LNXTHERM:02: registered as thermal_zone2
- [ 9.642254] ACPI: Thermal Zone [EXTZ] (38 C)
- [ 9.657139] thermal LNXTHERM:03: registered as thermal_zone3
- [ 9.657140] ACPI: Thermal Zone [LOCZ] (41 C)
- [ 9.672004] thermal LNXTHERM:04: registered as thermal_zone4
- [ 9.672005] ACPI: Thermal Zone [BATZ] (28 C)
- [ 9.672185] thermal LNXTHERM:05: registered as thermal_zone5
- [ 9.672186] ACPI: Thermal Zone [PCHZ] (114 C)
- [ 9.684841] hp_accel: laptop model unknown, using default axes configuration
- [ 9.802076] lis3lv02d: 8 bits 3DC sensor found
- [ 10.264490] ACPI: AC Adapter [AC] (off-line)
- [ 10.264686] wmi: Mapper loaded
- [ 10.277635] Intel(R) Wireless WiFi driver for Linux
- [ 10.277636] Copyright(c) 2003- 2015 Intel Corporation
- [ 10.298282] Bluetooth: Core ver 2.21
- [ 10.298290] NET: Registered protocol family 31
- [ 10.298291] Bluetooth: HCI device and connection manager initialized
- [ 10.298293] Bluetooth: HCI socket layer initialized
- [ 10.298294] Bluetooth: L2CAP socket layer initialized
- [ 10.298297] Bluetooth: SCO socket layer initialized
- [ 10.416877] iTCO_vendor_support: vendor-support=0
- [ 10.428740] ACPI: Battery Slot [BAT0] (battery present)
- [ 10.440210] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7260-17.ucode failed with error -2
- [ 10.440212] iwlwifi 0000:03:00.0: Falling back to user helper
- [ 10.467886] input: HP WMI hotkeys as /devices/virtual/input/input14
- [ 10.471341] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
- [ 10.471360] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
- [ 10.471439] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 10.490974] ppdev: user-space parallel port driver
- [ 10.643839] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_exit [i915])
- [ 10.808207] usbcore: registered new interface driver btusb
- [ 10.821383] Bluetooth: hci0: read Intel version: 370710018002030d00
- [ 10.824467] Linux video capture interface: v2.00
- [ 10.856120] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD91BXX: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
- [ 10.856122] snd_hda_codec_idt hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 10.856123] snd_hda_codec_idt hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
- [ 10.856124] snd_hda_codec_idt hdaudioC1D0: mono: mono_out=0x0
- [ 10.856125] snd_hda_codec_idt hdaudioC1D0: inputs:
- [ 10.856127] snd_hda_codec_idt hdaudioC1D0: Internal Mic=0x11
- [ 10.856128] snd_hda_codec_idt hdaudioC1D0: Mic=0xc
- [ 10.884944] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
- [ 10.885805] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
- [ 10.886387] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
- [ 10.886445] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
- [ 10.895288] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
- [ 10.895520] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
- [ 10.895556] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
- [ 11.037369] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
- [ 11.052437] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input21
- [ 11.090593] wl: module license 'MIXED/Proprietary' taints kernel.
- [ 11.090595] Disabling lock debugging due to kernel taint
- [ 11.115024] AVX2 version of gcm_enc/dec engaged.
- [ 11.115027] AES CTR mode by8 optimization enabled
- [ 11.553676] uvcvideo: Found UVC 1.00 device HP HD Webcam (04ca:7022)
- [ 11.562237] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input22
- [ 11.562354] usbcore: registered new interface driver uvcvideo
- [ 11.562355] USB Video Class driver (1.1.1)
- [ 12.121228] cfg80211: World regulatory domain updated:
- [ 12.121230] cfg80211: DFS Master region: unset
- [ 12.121231] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 12.121233] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 12.121235] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 12.121236] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 12.121237] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 12.121239] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
- [ 12.121240] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- [ 12.121241] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 12.121242] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 13.930294] Adding 8388604k swap on /dev/sda1. Priority:-1 extents:1 across:8388604k FS
- [ 14.244690] EXT4-fs (sda2): re-mounted. Opts: (null)
- [ 14.347670] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- [ 14.353206] EXT4-fs (sda3): re-mounted. Opts: (null)
- [ 17.839532] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 17.839534] Bluetooth: BNEP filters: protocol multicast
- [ 17.839536] Bluetooth: BNEP socket layer initialized
- [ 19.389326] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 19.497694] r8169 0000:02:00.0 eth0: link down
- [ 19.497741] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 70.437486] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7260-16.ucode failed with error -2
- [ 70.437489] iwlwifi 0000:03:00.0: Falling back to user helper
- [ 101.405035] Key type encrypted registered
- [ 105.413524] Bluetooth: RFCOMM TTY layer initialized
- [ 105.413529] Bluetooth: RFCOMM socket layer initialized
- [ 105.413533] Bluetooth: RFCOMM ver 1.11
- [ 130.435354] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7260-15.ucode failed with error -2
- [ 130.435356] iwlwifi 0000:03:00.0: Falling back to user helper
- [ 145.171067] atkbd serio0: Unknown key pressed (translated set 2, code 0xa8 on isa0060/serio0).
- [ 145.171075] atkbd serio0: Use 'setkeycodes e028 <keycode>' to make it known.
- [ 147.554291] atkbd serio0: Unknown key pressed (translated set 2, code 0xa5 on isa0060/serio0).
- [ 147.554299] atkbd serio0: Use 'setkeycodes e025 <keycode>' to make it known.
- [ 155.186326] r8169 0000:02:00.0 eth0: link up
- [ 155.186340] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 190.433376] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7260-14.ucode failed with error -2
- [ 190.433378] iwlwifi 0000:03:00.0: Falling back to user helper
- [ 250.767547] iwlwifi 0000:03:00.0: loaded firmware version 25.30.13.0 op_mode iwlmvm
- [ 250.844049] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
- [ 250.844130] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 250.844452] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 251.035608] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
- [ 251.040381] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 251.040541] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 251.040805] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 251.226480] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 251.226739] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 251.243168] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 251.255525] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 255.083909] wlan0: authenticate with 18:4a:6f:e6:59:30
- [ 255.086946] wlan0: send auth to 18:4a:6f:e6:59:30 (try 1/3)
- [ 255.152675] wlan0: authenticated
- [ 255.153033] wlan0: associate with 18:4a:6f:e6:59:30 (try 1/3)
- [ 255.168148] wlan0: RX AssocResp from 18:4a:6f:e6:59:30 (capab=0x411 status=0 aid=3)
- [ 255.172031] wlan0: associated
- [ 255.172054] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 364.905268] atkbd serio0: Unknown key pressed (translated set 2, code 0xa5 on isa0060/serio0).
- [ 364.905272] atkbd serio0: Use 'setkeycodes e025 <keycode>' to make it known.
- [ 426.937398] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
- [ 426.937409] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
- [ 427.011821] wlan0: deauthenticating from 18:4a:6f:e6:59:30 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 427.029198] cfg80211: World regulatory domain updated:
- [ 427.029200] cfg80211: DFS Master region: unset
- [ 427.029200] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 427.029202] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 427.029203] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 427.029204] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 427.029205] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 427.029206] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
- [ 427.029207] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- [ 427.029208] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 427.029209] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 427.123797] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
- [ 427.123801] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
- [ 507.228317] r8169 0000:02:00.0 eth0: link down
- [ 507.428527] atkbd serio0: Unknown key pressed (translated set 2, code 0xa5 on isa0060/serio0).
- [ 507.428531] atkbd serio0: Use 'setkeycodes e025 <keycode>' to make it known.
- [ 509.117629] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
- [ 509.117633] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
- [ 509.118706] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 509.118965] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 509.327794] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
- [ 509.327798] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
- [ 509.331209] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 509.331491] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 509.345865] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 509.357890] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 512.749410] wlan0: authenticate with 18:4a:6f:e6:59:30
- [ 512.751853] wlan0: send auth to 18:4a:6f:e6:59:30 (try 1/3)
- [ 512.757843] r8169 0000:02:00.0 eth0: rtl_counters_cond == 1 (loop: 1000, delay: 10).
- [ 512.885812] wlan0: authenticated
- [ 512.886230] wlan0: associate with 18:4a:6f:e6:59:30 (try 1/3)
- [ 512.894307] wlan0: RX AssocResp from 18:4a:6f:e6:59:30 (capab=0x411 status=0 aid=3)
- [ 512.897655] wlan0: associated
- [ 512.897676] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 512.942700] r8169 0000:02:00.0 eth0: rtl_counters_cond == 1 (loop: 1000, delay: 10).
- [ 512.966542] r8169 0000:02:00.0 eth0: rtl_counters_cond == 1 (loop: 1000, delay: 10).
- [ 516.043645] r8169 0000:02:00.0 eth0: rtl_counters_cond == 1 (loop: 1000, delay: 10).
- [ 516.065217] r8169 0000:02:00.0 eth0: rtl_counters_cond == 1 (loop: 1000, delay: 10).
- [ 521.999439] atkbd serio0: Unknown key pressed (translated set 2, code 0xa5 on isa0060/serio0).
- [ 521.999443] atkbd serio0: Use 'setkeycodes e025 <keycode>' to make it known.
- [ 523.486323] atkbd serio0: Unknown key pressed (translated set 2, code 0xa8 on isa0060/serio0).
- [ 523.486330] atkbd serio0: Use 'setkeycodes e028 <keycode>' to make it known.
- [ 523.784312] atkbd serio0: Unknown key pressed (translated set 2, code 0xa7 on isa0060/serio0).
- [ 523.784315] atkbd serio0: Use 'setkeycodes e027 <keycode>' to make it known.
- [ 524.378493] atkbd serio0: Unknown key pressed (translated set 2, code 0xa5 on isa0060/serio0).
- [ 524.378501] atkbd serio0: Use 'setkeycodes e025 <keycode>' to make it known.
- [ 526.041347] r8169 0000:02:00.0 eth0: rtl_counters_cond == 1 (loop: 1000, delay: 10).
- [ 526.062525] r8169 0000:02:00.0 eth0: rtl_counters_cond == 1 (loop: 1000, delay: 10).
- [ 536.044837] r8169 0000:02:00.0 eth0: rtl_counters_cond == 1 (loop: 1000, delay: 10).
- [ 536.066544] r8169 0000:02:00.0 eth0: rtl_counters_cond == 1 (loop: 1000, delay: 10).
- [ 546.042942] r8169 0000:02:00.0 eth0: rtl_counters_cond == 1 (loop: 1000, delay: 10).
- [ 546.063973] r8169 0000:02:00.0 eth0: rtl_counters_cond == 1 (loop: 1000, delay: 10).
- [ 556.039986] r8169 0000:02:00.0 eth0: rtl_counters_cond == 1 (loop: 1000, delay: 10).
- [ 556.060964] r8169 0000:02:00.0 eth0: rtl_counters_cond == 1 (loop: 1000, delay: 10).
- [ 566.048652] r8169 0000:02:00.0 eth0: rtl_counters_cond == 1 (loop: 1000, delay: 10).
- [ 566.069661] r8169 0000:02:00.0 eth0: rtl_counters_cond == 1 (loop: 1000, delay: 10).
- [ 572.238542] r8169 0000:02:00.0 eth0: link down
- [ 581.781667] atkbd serio0: Unknown key pressed (translated set 2, code 0xa5 on isa0060/serio0).
- [ 581.781671] atkbd serio0: Use 'setkeycodes e025 <keycode>' to make it known.
- [ 582.971266] atkbd serio0: Unknown key pressed (translated set 2, code 0xa7 on isa0060/serio0).
- [ 582.971270] atkbd serio0: Use 'setkeycodes e027 <keycode>' to make it known.
- [ 583.268609] atkbd serio0: Unknown key pressed (translated set 2, code 0xa8 on isa0060/serio0).
- [ 583.268613] atkbd serio0: Use 'setkeycodes e028 <keycode>' to make it known.
- [ 583.869032] atkbd serio0: Unknown key pressed (translated set 2, code 0xa6 on isa0060/serio0).
- [ 583.869035] atkbd serio0: Use 'setkeycodes e026 <keycode>' to make it known.
- [ 625.715991] wlan0: deauthenticating from 18:4a:6f:e6:59:30 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 625.721938] cfg80211: World regulatory domain updated:
- [ 625.721940] cfg80211: DFS Master region: unset
- [ 625.721941] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 625.721943] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 625.721944] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 625.721945] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 625.721947] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 625.721949] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
- [ 625.721950] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- [ 625.721951] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 625.721952] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 629.084229] wlan0: authenticate with 18:4a:6f:e6:59:30
- [ 629.086351] wlan0: send auth to 18:4a:6f:e6:59:30 (try 1/3)
- [ 629.088053] wlan0: authenticated
- [ 629.088219] wlan0: associate with 18:4a:6f:e6:59:30 (try 1/3)
- [ 629.095696] wlan0: RX AssocResp from 18:4a:6f:e6:59:30 (capab=0x411 status=0 aid=3)
- [ 629.097003] wlan0: associated
- [ 689.483123] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
- [ 689.483126] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
- [ 689.484008] wlan0: deauthenticating from 18:4a:6f:e6:59:30 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 689.494628] cfg80211: World regulatory domain updated:
- [ 689.494631] cfg80211: DFS Master region: unset
- [ 689.494632] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 689.494634] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 689.494635] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 689.494636] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 689.494637] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 689.494638] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
- [ 689.494639] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- [ 689.494640] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 689.494641] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 689.609311] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
- [ 689.609314] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
- [ 693.830842] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
- [ 693.830852] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
- [ 693.832782] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 693.833078] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 693.954052] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
- [ 693.954056] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
- [ 694.044610] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 694.044869] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 694.060603] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 694.076407] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 697.460638] wlan0: authenticate with 18:4a:6f:e6:59:30
- [ 697.462852] wlan0: send auth to 18:4a:6f:e6:59:30 (try 1/3)
- [ 697.607824] wlan0: authenticated
- [ 697.608889] wlan0: associate with 18:4a:6f:e6:59:30 (try 1/3)
- [ 697.617012] wlan0: RX AssocResp from 18:4a:6f:e6:59:30 (capab=0x411 status=0 aid=3)
- [ 697.620391] wlan0: associated
- [ 697.620411] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 776.188110] wlan0: deauthenticating from 18:4a:6f:e6:59:30 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 776.199542] cfg80211: World regulatory domain updated:
- [ 776.199545] cfg80211: DFS Master region: unset
- [ 776.199545] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 776.199548] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 776.199549] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 776.199550] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 776.199552] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 776.199553] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
- [ 776.199555] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- [ 776.199556] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 776.199557] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 779.561431] wlan0: authenticate with 18:4a:6f:e6:59:30
- [ 779.563658] wlan0: send auth to 18:4a:6f:e6:59:30 (try 1/3)
- [ 779.565336] wlan0: authenticated
- [ 779.566070] wlan0: associate with 18:4a:6f:e6:59:30 (try 1/3)
- [ 779.576690] wlan0: RX AssocResp from 18:4a:6f:e6:59:30 (capab=0x411 status=0 aid=3)
- [ 779.581679] wlan0: associated
- [ 815.452456] wlan0: deauthenticating from 18:4a:6f:e6:59:30 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 815.458873] cfg80211: World regulatory domain updated:
- [ 815.458875] cfg80211: DFS Master region: unset
- [ 815.458877] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 815.458879] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 815.458881] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 815.458882] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 815.458884] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 815.458886] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
- [ 815.458887] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- [ 815.458888] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 815.458889] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 816.849969] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
- [ 816.849973] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
- [ 817.026140] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
- [ 817.026144] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
- [ 855.175760] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
- [ 855.175764] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
- [ 855.176412] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 855.176722] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 855.308253] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
- [ 855.308257] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
- [ 855.375513] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 855.375773] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
- [ 855.389582] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 855.402362] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 875.322987] wlan0: authenticate with 18:4a:6f:e6:59:30
- [ 875.325414] wlan0: send auth to 18:4a:6f:e6:59:30 (try 1/3)
- [ 875.369603] wlan0: authenticated
- [ 875.370811] wlan0: associate with 18:4a:6f:e6:59:30 (try 1/3)
- [ 875.378215] wlan0: RX AssocResp from 18:4a:6f:e6:59:30 (capab=0x411 status=0 aid=3)
- [ 875.381825] wlan0: associated
- [ 875.381849] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- deathstar ~ # dmesg
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement