Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.2.0-34-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #53-Ubuntu SMP Thu Nov 15 10:48:16 UTC 2012 (Ubuntu 3.2.0-34.53-generic 3.2.33)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-34-generic root=UUID=dbe62b66-c96c-4f9f-9759-6513be232012 ro vmalloc=256m quiet splash vga=792 noresume nohz=off acpi_enforce_resources=lax vt.handoff=7
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
- [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000005ff90000 (usable)
- [ 0.000000] BIOS-e820: 000000005ff90000 - 000000005ffa0000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000005ffa0000 - 000000005ffe0000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000005ffe0000 - 0000000060000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI present.
- [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./K10N78M Pro, BIOS P1.30 12/15/2009
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] No AGP bridge found
- [ 0.000000] last_pfn = 0x5ff90 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back
- [ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back
- [ 0.000000] 2 disabled
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] init_memory_mapping: 0000000000000000-000000005ff90000
- [ 0.000000] 0000000000 - 0040000000 page 1G
- [ 0.000000] 0040000000 - 005fe00000 page 2M
- [ 0.000000] 005fe00000 - 005ff90000 page 4k
- [ 0.000000] kernel direct mapping tables up to 5ff90000 @ 1fffd000-20000000
- [ 0.000000] RAMDISK: 36414000 - 37202000
- [ 0.000000] ACPI: RSDP 00000000000fb4a0 00014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT 000000005ff90000 00044 (v01 121509 RSDT1704 20091215 MSFT 00000097)
- [ 0.000000] ACPI: FACP 000000005ff90200 00084 (v01 A M I OEMFACP 12000601 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 000000005ff90460 0889A (v01 AS257 AS257122 00000122 INTL 20051117)
- [ 0.000000] ACPI: FACS 000000005ffa0000 00040
- [ 0.000000] ACPI: APIC 000000005ff90390 00090 (v01 121509 APIC1704 20091215 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 000000005ff90420 0003C (v01 121509 OEMMCFG 20091215 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 000000005ffa0040 00073 (v01 121509 OEMB1704 20091215 MSFT 00000097)
- [ 0.000000] ACPI: AAFT 000000005ff98d00 00027 (v01 121509 OEMAAFT 20091215 MSFT 00000097)
- [ 0.000000] ACPI: INFO 000000005ffa00c0 00124 (v01 121509 AMDINFO 20091215 MSFT 00000097)
- [ 0.000000] ACPI: NVHD 000000005ffa01f0 00284 (v01 121509 NVHDCP 20091215 MSFT 00000097)
- [ 0.000000] ACPI: SSDT 000000005ff98d30 0023E (v01 A M I POWERNOW 00000001 AMD 00000001)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] Scanning NUMA topology in Northbridge 24
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at 0000000000000000-000000005ff90000
- [ 0.000000] Initmem setup node 0 0000000000000000-000000005ff90000
- [ 0.000000] NODE_DATA [000000005ff8b000 - 000000005ff8ffff]
- [ 0.000000] [ffffea0000000000-ffffea00017fffff] PMD -> [ffff88005de00000-ffff88005f5fffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x0005ff90
- [ 0.000000] On node 0 totalpages: 392991
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 5 pages reserved
- [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 6079 pages used for memmap
- [ 0.000000] DMA32 zone: 382929 pages, LIFO batch:31
- [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
- [ 0.000000] If you got timer trouble try acpi_use_timer_override
- [ 0.000000] ACPI: PM-Timer IO Port: 0x2008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: BIOS IRQ0 override ignored.
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] ACPI: IRQ14 used by override.
- [ 0.000000] ACPI: IRQ15 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] SMP: Allowing 6 CPUs, 5 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
- [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88005fc00000 s83136 r8192 d23360 u262144
- [ 0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 386843
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-34-generic root=UUID=dbe62b66-c96c-4f9f-9759-6513be232012 ro vmalloc=256m quiet splash vga=792 noresume nohz=off acpi_enforce_resources=lax vt.handoff=7
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Node 0: aperture @ a108000000 size 32 MB
- [ 0.000000] Aperture beyond 4GB. Ignoring.
- [ 0.000000] Memory: 1516624k/1572416k available (6564k kernel code, 452k absent, 55340k reserved, 6638k data, 924k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:16640 nr_irqs:728 16
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] vt handoff: transparent VT on vt#7
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 12582912 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2700.082 MHz processor.
- [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5400.16 BogoMIPS (lpj=10800328)
- [ 0.004008] pid_max: default: 32768 minimum: 301
- [ 0.004029] Security Framework initialized
- [ 0.004044] AppArmor: AppArmor initialized
- [ 0.004045] Yama: becoming mindful.
- [ 0.004222] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.008220] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.008558] Mount-cache hash table entries: 256
- [ 0.008672] Initializing cgroup subsys cpuacct
- [ 0.008677] Initializing cgroup subsys memory
- [ 0.008685] Initializing cgroup subsys devices
- [ 0.008686] Initializing cgroup subsys freezer
- [ 0.008688] Initializing cgroup subsys blkio
- [ 0.008694] Initializing cgroup subsys perf_event
- [ 0.008719] tseg: 0000000000
- [ 0.008732] mce: CPU supports 6 MCE banks
- [ 0.008768] SMP alternatives: switching to UP code
- [ 0.014528] ACPI: Core revision 20110623
- [ 0.018109] ftrace: allocating 27030 entries in 107 pages
- [ 0.020622] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
- [ 0.060349] CPU0: AMD Sempron(tm) 140 Processor stepping 02
- [ 0.064003] Performance Events: AMD PMU driver.
- [ 0.064003] ... version: 0
- [ 0.064003] ... bit width: 48
- [ 0.064003] ... generic registers: 4
- [ 0.064003] ... value mask: 0000ffffffffffff
- [ 0.064003] ... max period: 00007fffffffffff
- [ 0.064003] ... fixed-purpose events: 0
- [ 0.064003] ... event mask: 000000000000000f
- [ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.064003] Brought up 1 CPUs
- [ 0.064003] Total of 1 processors activated (5400.16 BogoMIPS).
- [ 0.064003] devtmpfs: initialized
- [ 0.064003] EVM: security.selinux
- [ 0.064003] EVM: security.SMACK64
- [ 0.064003] EVM: security.capability
- [ 0.064003] PM: Registering ACPI NVS region at 5ffa0000 (262144 bytes)
- [ 0.064003] print_constraints: dummy:
- [ 0.064003] RTC time: 18:46:01, date: 05/22/13
- [ 0.064003] NET: Registered protocol family 16
- [ 0.064003] node 0 link 0: io port [1000, ffffff]
- [ 0.064003] TOM: 0000000080000000 aka 2048M
- [ 0.064003] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
- [ 0.064003] node 0 link 0: mmio [e0000000, efffffff] ==> none
- [ 0.064003] node 0 link 0: mmio [80000000, dfffffff]
- [ 0.064003] node 0 link 0: mmio [f0000000, fe0bffff]
- [ 0.064003] node 0 link 0: mmio [a0000, bffff]
- [ 0.064003] bus: [00, 07] on node 0 link 0
- [ 0.064003] bus: 00 index 0 [io 0x0000-0xffff]
- [ 0.064003] bus: 00 index 1 [mem 0x80000000-0xdfffffff]
- [ 0.064003] bus: 00 index 2 [mem 0xf0000000-0xfcffffffff]
- [ 0.064003] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
- [ 0.064003] Extended Config Space enabled on 1 nodes
- [ 0.064003] ACPI: bus type pci registered
- [ 0.064003] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.064003] PCI: not using MMCONFIG
- [ 0.064003] PCI: Using configuration type 1 for base access
- [ 0.064003] PCI: Using configuration type 1 for extended access
- [ 0.064003] bio: create slab <bio-0> at 0
- [ 0.064003] ACPI: Added _OSI(Module Device)
- [ 0.064003] ACPI: Added _OSI(Processor Device)
- [ 0.064003] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.064003] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.064294] ACPI: EC: Look up EC in DSDT
- [ 0.065388] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.067723] ACPI: Interpreter enabled
- [ 0.067726] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.067742] ACPI: Using IOAPIC for interrupt routing
- [ 0.067757] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.068613] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 0.087612] ACPI: No dock devices found.
- [ 0.087615] HEST: Table not found.
- [ 0.087618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.087782] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.087937] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
- [ 0.087939] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
- [ 0.087941] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.087943] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
- [ 0.087945] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff]
- [ 0.087947] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
- [ 0.087982] pci 0000:00:00.0: [10de:0754] type 0 class 0x000500
- [ 0.088241] pci 0000:00:01.0: [10de:075c] type 0 class 0x000601
- [ 0.088247] pci 0000:00:01.0: reg 10: [io 0x2f00-0x2fff]
- [ 0.088280] pci 0000:00:01.1: [10de:0752] type 0 class 0x000c05
- [ 0.088291] pci 0000:00:01.1: reg 10: [io 0x2900-0x293f]
- [ 0.088306] pci 0000:00:01.1: reg 20: [io 0x2d00-0x2d3f]
- [ 0.088311] pci 0000:00:01.1: reg 24: [io 0x2e00-0x2e3f]
- [ 0.088339] pci 0000:00:01.1: PME# supported from D3hot D3cold
- [ 0.088344] pci 0000:00:01.1: PME# disabled
- [ 0.088354] pci 0000:00:01.2: [10de:0751] type 0 class 0x000500
- [ 0.088398] pci 0000:00:01.3: [10de:0753] type 0 class 0x000b40
- [ 0.088414] pci 0000:00:01.3: reg 10: [mem 0xfce80000-0xfcefffff]
- [ 0.088522] pci 0000:00:01.4: [10de:0568] type 0 class 0x000500
- [ 0.088588] pci 0000:00:02.0: [10de:077b] type 0 class 0x000c03
- [ 0.088596] pci 0000:00:02.0: reg 10: [mem 0xfce7f000-0xfce7ffff]
- [ 0.088629] pci 0000:00:02.0: supports D1 D2
- [ 0.088630] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.088633] pci 0000:00:02.0: PME# disabled
- [ 0.088645] pci 0000:00:02.1: [10de:077c] type 0 class 0x000c03
- [ 0.088654] pci 0000:00:02.1: reg 10: [mem 0xfce7ec00-0xfce7ecff]
- [ 0.088694] pci 0000:00:02.1: supports D1 D2
- [ 0.088696] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.088698] pci 0000:00:02.1: PME# disabled
- [ 0.088715] pci 0000:00:04.0: [10de:077d] type 0 class 0x000c03
- [ 0.088723] pci 0000:00:04.0: reg 10: [mem 0xfce7d000-0xfce7dfff]
- [ 0.088755] pci 0000:00:04.0: supports D1 D2
- [ 0.088757] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.088760] pci 0000:00:04.0: PME# disabled
- [ 0.088770] pci 0000:00:04.1: [10de:077e] type 0 class 0x000c03
- [ 0.088779] pci 0000:00:04.1: reg 10: [mem 0xfce7e800-0xfce7e8ff]
- [ 0.088819] pci 0000:00:04.1: supports D1 D2
- [ 0.088821] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.088823] pci 0000:00:04.1: PME# disabled
- [ 0.088842] pci 0000:00:06.0: [10de:0759] type 0 class 0x000101
- [ 0.088863] pci 0000:00:06.0: reg 20: [io 0xffa0-0xffaf]
- [ 0.088891] pci 0000:00:07.0: [10de:0774] type 0 class 0x000403
- [ 0.088899] pci 0000:00:07.0: reg 10: [mem 0xfce78000-0xfce7bfff]
- [ 0.088932] pci 0000:00:07.0: PME# supported from D3hot D3cold
- [ 0.088934] pci 0000:00:07.0: PME# disabled
- [ 0.088943] pci 0000:00:08.0: [10de:075a] type 1 class 0x000604
- [ 0.088980] pci 0000:00:09.0: [10de:0ad0] type 0 class 0x000101
- [ 0.088988] pci 0000:00:09.0: reg 10: [io 0xc480-0xc487]
- [ 0.088992] pci 0000:00:09.0: reg 14: [io 0xc400-0xc403]
- [ 0.088996] pci 0000:00:09.0: reg 18: [io 0xc080-0xc087]
- [ 0.089000] pci 0000:00:09.0: reg 1c: [io 0xc000-0xc003]
- [ 0.089004] pci 0000:00:09.0: reg 20: [io 0xbc00-0xbc0f]
- [ 0.089008] pci 0000:00:09.0: reg 24: [mem 0xfce76000-0xfce77fff]
- [ 0.089037] pci 0000:00:0a.0: [10de:0760] type 0 class 0x000200
- [ 0.089046] pci 0000:00:0a.0: reg 10: [mem 0xfce7c000-0xfce7cfff]
- [ 0.089050] pci 0000:00:0a.0: reg 14: [io 0xb880-0xb887]
- [ 0.089054] pci 0000:00:0a.0: reg 18: [mem 0xfce7e400-0xfce7e4ff]
- [ 0.089058] pci 0000:00:0a.0: reg 1c: [mem 0xfce7e000-0xfce7e00f]
- [ 0.089087] pci 0000:00:0a.0: supports D1 D2
- [ 0.089088] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.089092] pci 0000:00:0a.0: PME# disabled
- [ 0.089104] pci 0000:00:0b.0: [10de:0569] type 1 class 0x000604
- [ 0.089127] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.089129] pci 0000:00:0b.0: PME# disabled
- [ 0.089182] pci 0000:00:10.0: [10de:0778] type 1 class 0x000604
- [ 0.089405] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.089412] pci 0000:00:10.0: PME# disabled
- [ 0.089497] pci 0000:00:12.0: [10de:075b] type 1 class 0x000604
- [ 0.089719] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.089726] pci 0000:00:12.0: PME# disabled
- [ 0.089771] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
- [ 0.089785] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
- [ 0.089796] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
- [ 0.089807] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
- [ 0.089821] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
- [ 0.089864] pci 0000:01:09.0: [1131:7146] type 0 class 0x000480
- [ 0.089873] pci 0000:01:09.0: reg 10: [mem 0xfcfffc00-0xfcfffdff]
- [ 0.089919] pci 0000:01:0a.0: [13d0:2103] type 0 class 0x000280
- [ 0.089928] pci 0000:01:0a.0: reg 10: [mem 0xfcfe0000-0xfcfeffff]
- [ 0.089936] pci 0000:01:0a.0: reg 14: [io 0xdc00-0xdc1f]
- [ 0.089989] pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode)
- [ 0.089992] pci 0000:00:08.0: bridge window [io 0xd000-0xdfff]
- [ 0.089995] pci 0000:00:08.0: bridge window [mem 0xfcf00000-0xfcffffff]
- [ 0.089998] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.090000] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.090002] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.090004] pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
- [ 0.090006] pci 0000:00:08.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
- [ 0.090008] pci 0000:00:08.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
- [ 0.090026] pci 0000:02:00.0: [10de:0849] type 0 class 0x000300
- [ 0.090033] pci 0000:02:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
- [ 0.090038] pci 0000:02:00.0: reg 14: [mem 0xf0000000-0xf7ffffff 64bit pref]
- [ 0.090044] pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
- [ 0.090048] pci 0000:02:00.0: reg 24: [io 0xec00-0xec7f]
- [ 0.090051] pci 0000:02:00.0: reg 30: [mem 0xfebe0000-0xfebfffff pref]
- [ 0.090076] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
- [ 0.090079] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
- [ 0.090081] pci 0000:00:0b.0: bridge window [mem 0xfd000000-0xfebfffff]
- [ 0.090084] pci 0000:00:0b.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
- [ 0.090231] pci 0000:00:10.0: PCI bridge to [bus 03-03]
- [ 0.090260] pci 0000:00:10.0: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
- [ 0.090409] pci 0000:00:12.0: PCI bridge to [bus 04-04]
- [ 0.090438] pci 0000:00:12.0: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
- [ 0.090468] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.090630] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.090670] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
- [ 0.090695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT]
- [ 0.090720] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
- [ 0.090824] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.090958] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
- [ 0.090960] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 0.097149] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
- [ 0.097221] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
- [ 0.097292] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
- [ 0.097359] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
- [ 0.097429] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
- [ 0.097497] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
- [ 0.097564] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
- [ 0.097632] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
- [ 0.097700] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
- [ 0.097768] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
- [ 0.097836] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
- [ 0.097904] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
- [ 0.097973] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
- [ 0.098041] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
- [ 0.098111] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
- [ 0.098179] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
- [ 0.098247] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.
- [ 0.098315] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
- [ 0.098383] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
- [ 0.098451] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
- [ 0.098519] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
- [ 0.098587] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
- [ 0.098655] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
- [ 0.098723] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
- [ 0.098791] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
- [ 0.098860] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
- [ 0.098928] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
- [ 0.098996] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
- [ 0.099066] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
- [ 0.099136] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
- [ 0.099204] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
- [ 0.099273] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
- [ 0.099342] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
- [ 0.099411] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
- [ 0.099480] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
- [ 0.099549] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
- [ 0.099619] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
- [ 0.099690] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
- [ 0.099759] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
- [ 0.099829] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15
- [ 0.099899] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *15
- [ 0.099969] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
- [ 0.100045] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
- [ 0.100116] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
- [ 0.100200] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
- [ 0.100271] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
- [ 0.100346] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11
- [ 0.100448] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.100450] vgaarb: loaded
- [ 0.100452] vgaarb: bridge control possible 0000:02:00.0
- [ 0.100535] i2c-core: driver [aat2870] using legacy suspend method
- [ 0.100536] i2c-core: driver [aat2870] using legacy resume method
- [ 0.100595] SCSI subsystem initialized
- [ 0.100643] libata version 3.00 loaded.
- [ 0.100679] usbcore: registered new interface driver usbfs
- [ 0.100689] usbcore: registered new interface driver hub
- [ 0.100708] usbcore: registered new device driver usb
- [ 0.100775] PCI: Using ACPI for IRQ routing
- [ 0.107063] PCI: pci_cache_line_size set to 64 bytes
- [ 0.107127] reserve RAM buffer: 000000000009f800 - 000000000009ffff
- [ 0.107129] reserve RAM buffer: 000000005ff90000 - 000000005fffffff
- [ 0.107207] NetLabel: Initializing
- [ 0.107209] NetLabel: domain hash size = 128
- [ 0.107210] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.107218] NetLabel: unlabeled traffic allowed by default
- [ 0.112113] AppArmor: AppArmor Filesystem Enabled
- [ 0.112140] pnp: PnP ACPI init
- [ 0.112155] ACPI: bus type pnp registered
- [ 0.112276] pnp 00:00: [bus 00-ff]
- [ 0.112278] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.112280] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.112281] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.112283] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.112285] pnp 00:00: [mem 0x000d0000-0x000dffff window]
- [ 0.112287] pnp 00:00: [mem 0x80000000-0xdfffffff window]
- [ 0.112289] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
- [ 0.112356] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
- [ 0.112380] pnp 00:01: [dma 4]
- [ 0.112382] pnp 00:01: [io 0x0000-0x000f]
- [ 0.112384] pnp 00:01: [io 0x0081-0x0083]
- [ 0.112385] pnp 00:01: [io 0x0087]
- [ 0.112387] pnp 00:01: [io 0x0089-0x008b]
- [ 0.112388] pnp 00:01: [io 0x008f]
- [ 0.112389] pnp 00:01: [io 0x00c0-0x00df]
- [ 0.112410] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.112416] pnp 00:02: [io 0x0061]
- [ 0.112432] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.112440] pnp 00:03: [io 0x00f0-0x00ff]
- [ 0.112453] pnp 00:03: [irq 13]
- [ 0.112470] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.112779] pnp 00:04: [mem 0x000d0000-0x000d3fff window]
- [ 0.112781] pnp 00:04: [mem 0x000d4000-0x000d7fff window]
- [ 0.112782] pnp 00:04: [mem 0x000de000-0x000dffff window]
- [ 0.112784] pnp 00:04: [io 0x0010-0x001f]
- [ 0.112786] pnp 00:04: [io 0x0022-0x003f]
- [ 0.112787] pnp 00:04: [io 0x0044-0x004d]
- [ 0.112788] pnp 00:04: [io 0x0050-0x005f]
- [ 0.112790] pnp 00:04: [io 0x0062-0x0063]
- [ 0.112791] pnp 00:04: [io 0x0065-0x006f]
- [ 0.112793] pnp 00:04: [io 0x0072-0x007f]
- [ 0.112794] pnp 00:04: [io 0x0080]
- [ 0.112795] pnp 00:04: [io 0x0084-0x0086]
- [ 0.112797] pnp 00:04: [io 0x0088]
- [ 0.112798] pnp 00:04: [io 0x008c-0x008e]
- [ 0.112800] pnp 00:04: [io 0x0090-0x009f]
- [ 0.112801] pnp 00:04: [io 0x00a2-0x00bf]
- [ 0.112803] pnp 00:04: [io 0x00e0-0x00ef]
- [ 0.112804] pnp 00:04: [io 0x04d0-0x04d1]
- [ 0.112806] pnp 00:04: [io 0x0800-0x080f]
- [ 0.112807] pnp 00:04: [io 0x2000-0x207f]
- [ 0.112808] pnp 00:04: [io 0x2080-0x20ff]
- [ 0.112810] pnp 00:04: [io 0x2400-0x247f]
- [ 0.112811] pnp 00:04: [io 0x2480-0x24ff]
- [ 0.112813] pnp 00:04: [io 0x2800-0x287f]
- [ 0.112814] pnp 00:04: [io 0x2880-0x28ff]
- [ 0.112816] pnp 00:04: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 0.112818] pnp 00:04: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 0.112820] pnp 00:04: [mem 0xfed04000-0xfed04fff]
- [ 0.112822] pnp 00:04: [mem 0xfee01000-0xfeefffff]
- [ 0.112887] system 00:04: [io 0x04d0-0x04d1] has been reserved
- [ 0.112890] system 00:04: [io 0x0800-0x080f] has been reserved
- [ 0.112892] system 00:04: [io 0x2000-0x207f] has been reserved
- [ 0.112894] system 00:04: [io 0x2080-0x20ff] has been reserved
- [ 0.112896] system 00:04: [io 0x2400-0x247f] has been reserved
- [ 0.112898] system 00:04: [io 0x2480-0x24ff] has been reserved
- [ 0.112900] system 00:04: [io 0x2800-0x287f] has been reserved
- [ 0.112902] system 00:04: [io 0x2880-0x28ff] has been reserved
- [ 0.112905] system 00:04: [mem 0x000d0000-0x000d3fff window] has been reserved
- [ 0.112908] system 00:04: [mem 0x000d4000-0x000d7fff window] has been reserved
- [ 0.112910] system 00:04: [mem 0x000de000-0x000dffff window] has been reserved
- [ 0.112913] system 00:04: [mem 0xfed04000-0xfed04fff] has been reserved
- [ 0.112916] system 00:04: [mem 0xfee01000-0xfeefffff] has been reserved
- [ 0.112919] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.112957] pnp 00:05: [io 0x0070-0x0071]
- [ 0.112964] pnp 00:05: [irq 8]
- [ 0.112982] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.113038] pnp 00:06: [io 0x0060]
- [ 0.113039] pnp 00:06: [io 0x0064]
- [ 0.113041] pnp 00:06: [mem 0xfec00000-0xfec00fff]
- [ 0.113042] pnp 00:06: [mem 0xfee00000-0xfee00fff]
- [ 0.113071] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.113074] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.113076] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.113355] pnp 00:07: [io 0x0378-0x037f]
- [ 0.113356] pnp 00:07: [io 0x0778-0x077f]
- [ 0.113364] pnp 00:07: [irq 7]
- [ 0.113365] pnp 00:07: [dma 3]
- [ 0.113468] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
- [ 0.113651] pnp 00:08: [io 0x02f8-0x02ff]
- [ 0.113659] pnp 00:08: [irq 3]
- [ 0.113660] pnp 00:08: [dma 0 disabled]
- [ 0.113722] pnp 00:08: Plug and Play ACPI device, IDs PNP0510 (active)
- [ 0.113927] pnp 00:09: [io 0x03f8-0x03ff]
- [ 0.113934] pnp 00:09: [irq 4]
- [ 0.113936] pnp 00:09: [dma 0 disabled]
- [ 0.113982] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.114032] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.114034] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.114035] pnp 00:0a: [io 0x0290-0x029f]
- [ 0.114065] system 00:0a: [io 0x0290-0x029f] has been reserved
- [ 0.114067] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.114101] pnp 00:0b: [mem 0xe0000000-0xefffffff]
- [ 0.114130] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.114132] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.114250] pnp 00:0c: [mem 0x00000000-0x0009ffff]
- [ 0.114252] pnp 00:0c: [mem 0x000c0000-0x000cffff]
- [ 0.114253] pnp 00:0c: [mem 0x000e0000-0x000fffff]
- [ 0.114255] pnp 00:0c: [mem 0x00100000-0x7fffffff]
- [ 0.114257] pnp 00:0c: [mem 0xfec00000-0xffffffff]
- [ 0.114295] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.114297] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
- [ 0.114299] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
- [ 0.114302] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
- [ 0.114304] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
- [ 0.114306] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.114778] pnp: PnP ACPI: found 13 devices
- [ 0.114779] ACPI: ACPI bus type pnp unregistered
- [ 0.120552] Switching to clocksource acpi_pm
- [ 0.120571] PCI: max bus depth: 1 pci_try_num: 2
- [ 0.120616] pci 0000:00:08.0: PCI bridge to [bus 01-01]
- [ 0.120619] pci 0000:00:08.0: bridge window [io 0xd000-0xdfff]
- [ 0.120622] pci 0000:00:08.0: bridge window [mem 0xfcf00000-0xfcffffff]
- [ 0.120627] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
- [ 0.120629] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
- [ 0.120631] pci 0000:00:0b.0: bridge window [mem 0xfd000000-0xfebfffff]
- [ 0.120634] pci 0000:00:0b.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
- [ 0.120637] pci 0000:00:10.0: PCI bridge to [bus 03-03]
- [ 0.120651] pci 0000:00:10.0: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
- [ 0.120663] pci 0000:00:12.0: PCI bridge to [bus 04-04]
- [ 0.120677] pci 0000:00:12.0: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
- [ 0.120694] pci 0000:00:08.0: setting latency timer to 64
- [ 0.120698] pci 0000:00:0b.0: setting latency timer to 64
- [ 0.120828] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
- [ 0.120839] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
- [ 0.120847] pci 0000:00:10.0: setting latency timer to 64
- [ 0.120963] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
- [ 0.120971] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
- [ 0.120979] pci 0000:00:12.0: setting latency timer to 64
- [ 0.120984] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.120986] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.120988] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.120990] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
- [ 0.120992] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
- [ 0.120993] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
- [ 0.120995] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
- [ 0.120997] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
- [ 0.121000] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
- [ 0.121002] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
- [ 0.121004] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.121006] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
- [ 0.121008] pci_bus 0000:01: resource 8 [mem 0x80000000-0xdfffffff]
- [ 0.121010] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
- [ 0.121012] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
- [ 0.121014] pci_bus 0000:02: resource 1 [mem 0xfd000000-0xfebfffff]
- [ 0.121016] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
- [ 0.121019] pci_bus 0000:03: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
- [ 0.121022] pci_bus 0000:04: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref]
- [ 0.121058] NET: Registered protocol family 2
- [ 0.121138] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.121586] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- [ 0.122810] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.123152] TCP: Hash tables configured (established 262144 bind 65536)
- [ 0.123154] TCP reno registered
- [ 0.123162] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.123176] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.123262] NET: Registered protocol family 1
- [ 0.123480] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
- [ 0.123496] pci 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
- [ 0.236057] pci 0000:00:02.0: PCI INT A disabled
- [ 0.236218] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
- [ 0.236239] pci 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
- [ 0.236253] pci 0000:00:02.1: PCI INT B disabled
- [ 0.236363] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
- [ 0.236371] pci 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21
- [ 0.308057] pci 0000:00:04.0: PCI INT A disabled
- [ 0.308212] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
- [ 0.308228] pci 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 20 (level, low) -> IRQ 20
- [ 0.308242] pci 0000:00:04.1: PCI INT B disabled
- [ 0.308343] pci 0000:00:08.0: Enabling HT MSI Mapping
- [ 0.308439] pci 0000:00:09.0: Enabling HT MSI Mapping
- [ 0.308541] pci 0000:00:0a.0: Enabling HT MSI Mapping
- [ 0.308641] pci 0000:00:0b.0: Enabling HT MSI Mapping
- [ 0.308766] pci 0000:02:00.0: Boot video device
- [ 0.308768] PCI: CLS 64 bytes, default 64
- [ 0.309200] IBS: LVT offset 1 assigned
- [ 0.309206] perf: AMD IBS detected (0x0000001f)
- [ 0.309321] audit: initializing netlink socket (disabled)
- [ 0.309329] type=2000 audit(1369248361.308:1): initialized
- [ 0.329437] Trying to unpack rootfs image as initramfs...
- [ 0.356303] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.364468] VFS: Disk quotas dquot_6.5.2
- [ 0.364518] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.364925] fuse init (API version 7.17)
- [ 0.364989] msgmni has been set to 2962
- [ 0.376343] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.376365] io scheduler noop registered
- [ 0.376367] io scheduler deadline registered
- [ 0.376394] io scheduler cfq registered (default)
- [ 0.376734] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.376753] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.376868] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 0.376872] ACPI: Power Button [PWRB]
- [ 0.376909] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.376912] ACPI: Power Button [PWRF]
- [ 0.378766] ERST: Table is not found!
- [ 0.378768] GHES: HEST is not enabled!
- [ 0.378831] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 0.399206] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.440429] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 0.481181] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.504326] Linux agpgart interface v0.103
- [ 0.505321] brd: module loaded
- [ 0.505850] loop: module loaded
- [ 0.505984] ahci 0000:00:09.0: version 3.0
- [ 0.506144] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
- [ 0.506149] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
- [ 0.506186] ahci 0000:00:09.0: irq 40 for MSI/MSI-X
- [ 0.506191] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
- [ 0.506242] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
- [ 0.506245] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio sxs boh
- [ 0.506248] ahci 0000:00:09.0: setting latency timer to 64
- [ 0.512084] scsi0 : ahci
- [ 0.512192] scsi1 : ahci
- [ 0.512240] scsi2 : ahci
- [ 0.512287] scsi3 : ahci
- [ 0.516109] scsi4 : ahci
- [ 0.516196] scsi5 : ahci
- [ 0.516296] ata1: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76100 irq 40
- [ 0.516299] ata2: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76180 irq 40
- [ 0.516301] ata3: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76200 irq 40
- [ 0.516304] ata4: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76280 irq 40
- [ 0.516306] ata5: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76300 irq 40
- [ 0.516308] ata6: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76380 irq 40
- [ 0.516427] pata_acpi 0000:00:06.0: setting latency timer to 64
- [ 0.516674] Fixed MDIO Bus: probed
- [ 0.516690] tun: Universal TUN/TAP device driver, 1.6
- [ 0.516691] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.516731] PPP generic driver version 2.4.2
- [ 0.516803] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.516818] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
- [ 0.516833] ehci_hcd 0000:00:02.1: setting latency timer to 64
- [ 0.516835] ehci_hcd 0000:00:02.1: EHCI Host Controller
- [ 0.516863] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
- [ 0.516880] ehci_hcd 0000:00:02.1: debug port 1
- [ 0.516886] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
- [ 0.516908] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfce7ec00
- [ 0.528085] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
- [ 0.528229] hub 1-0:1.0: USB hub found
- [ 0.528233] hub 1-0:1.0: 6 ports detected
- [ 0.528310] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 20 (level, low) -> IRQ 20
- [ 0.528327] ehci_hcd 0000:00:04.1: setting latency timer to 64
- [ 0.528329] ehci_hcd 0000:00:04.1: EHCI Host Controller
- [ 0.528369] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
- [ 0.528385] ehci_hcd 0000:00:04.1: debug port 1
- [ 0.528392] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
- [ 0.528414] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfce7e800
- [ 0.540090] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
- [ 0.540225] hub 2-0:1.0: USB hub found
- [ 0.540229] hub 2-0:1.0: 6 ports detected
- [ 0.540298] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.540319] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
- [ 0.540337] ohci_hcd 0000:00:02.0: setting latency timer to 64
- [ 0.540340] ohci_hcd 0000:00:02.0: OHCI Host Controller
- [ 0.540373] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
- [ 0.540400] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfce7f000
- [ 0.598249] hub 3-0:1.0: USB hub found
- [ 0.598259] hub 3-0:1.0: 6 ports detected
- [ 0.598331] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21
- [ 0.598349] ohci_hcd 0000:00:04.0: setting latency timer to 64
- [ 0.598352] ohci_hcd 0000:00:04.0: OHCI Host Controller
- [ 0.598385] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
- [ 0.598412] ohci_hcd 0000:00:04.0: irq 21, io mem 0xfce7d000
- [ 0.635821] Freeing initrd memory: 14264k freed
- [ 0.654171] hub 4-0:1.0: USB hub found
- [ 0.654177] hub 4-0:1.0: 6 ports detected
- [ 0.654245] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.654295] usbcore: registered new interface driver libusual
- [ 0.654326] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 0.657225] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.657234] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.657355] mousedev: PS/2 mouse device common for all mice
- [ 0.657463] rtc_cmos 00:05: RTC can wake from S4
- [ 0.657640] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 0.657687] rtc0: alarms up to one year, y3k, 114 bytes nvram
- [ 0.657767] device-mapper: uevent: version 1.0.3
- [ 0.657815] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 0.657821] cpuidle: using governor ladder
- [ 0.657822] cpuidle: using governor menu
- [ 0.657824] EFI Variables Facility v0.08 2004-May-17
- [ 0.657984] TCP cubic registered
- [ 0.658073] NET: Registered protocol family 10
- [ 0.658428] NET: Registered protocol family 17
- [ 0.658432] Registering the dns_resolver key type
- [ 0.658515] registered taskstats version 1
- [ 0.663287] Magic number: 13:791:797
- [ 0.663418] rtc_cmos 00:05: setting system clock to 2013-05-22 18:46:02 UTC (1369248362)
- [ 0.663422] powernow-k8: Found 1 AMD Sempron(tm) 140 Processor (1 cpu cores) (version 2.20.00)
- [ 0.663447] powernow-k8: 0 : pstate 0 (2700 MHz)
- [ 0.663449] powernow-k8: 1 : pstate 1 (1900 MHz)
- [ 0.663450] powernow-k8: 2 : pstate 2 (1500 MHz)
- [ 0.663452] powernow-k8: 3 : pstate 3 (800 MHz)
- [ 0.663497] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.663499] EDD information not available.
- [ 0.836053] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 0.837033] ata1.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
- [ 0.837037] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 0.838102] ata1.00: configured for UDMA/133
- [ 0.838198] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
- [ 0.838332] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 0.838360] sd 0:0:0:0: [sda] Write Protect is off
- [ 0.838363] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 0.838375] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.838520] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 0.840054] ata3: SATA link down (SStatus 0 SControl 300)
- [ 0.840078] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 0.840587] ata2.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB00, max UDMA/100
- [ 0.841356] ata2.00: configured for UDMA/100
- [ 0.842249] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-222AB SB00 PQ: 0 ANSI: 5
- [ 0.844054] ata4: SATA link down (SStatus 0 SControl 300)
- [ 0.844077] ata5: SATA link down (SStatus 0 SControl 300)
- [ 0.844675] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 0.844679] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 0.844796] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 0.844841] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 0.848053] ata6: SATA link down (SStatus 0 SControl 300)
- [ 0.887894] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
- [ 0.888219] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 0.889419] Freeing unused kernel memory: 924k freed
- [ 0.889621] Write protecting the kernel read-only data: 12288k
- [ 0.894101] Freeing unused kernel memory: 1608k freed
- [ 0.897935] Freeing unused kernel memory: 1196k freed
- [ 0.910954] udevd[91]: starting version 175
- [ 0.934846] vesafb: mode is 1024x768x32, linelength=4096, pages=0
- [ 0.934849] vesafb: scrolling: redraw
- [ 0.934852] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 0.936239] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010980000, using 3072k, total 3072k
- [ 0.936332] Console: switching to colour frame buffer device 128x48
- [ 0.936348] fb0: VESA VGA frame buffer device
- [ 1.050525] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
- [ 1.050695] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
- [ 1.050700] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
- [ 1.050704] forcedeth 0000:00:0a.0: setting latency timer to 64
- [ 1.113130] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:25:22:34:1f:a8
- [ 1.113134] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
- [ 1.113284] pata_amd 0000:00:06.0: version 0.4.1
- [ 1.113314] pata_amd 0000:00:06.0: setting latency timer to 64
- [ 1.114283] scsi6 : pata_amd
- [ 1.114371] scsi7 : pata_amd
- [ 1.114925] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
- [ 1.114928] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
- [ 1.124059] usb 2-2: new high-speed USB device number 2 using ehci_hcd
- [ 1.279095] ata8: port disabled--ignoring
- [ 1.308072] Refined TSC clocksource calibration: 2700.000 MHz.
- [ 1.308077] Switching to clocksource tsc
- [ 1.362095] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- [ 1.560043] usb 3-2: new full-speed USB device number 2 using ohci_hcd
- [ 2.088048] usb 3-3: new low-speed USB device number 3 using ohci_hcd
- [ 2.608044] usb 3-5: new full-speed USB device number 4 using ohci_hcd
- [ 7.853163] udevd[485]: starting version 175
- [ 7.883066] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 8.025872] lp: driver loaded but no devices found
- [ 8.205554] Adding 4882428k swap on /dev/sda6. Priority:-1 extents:1 across:4882428k
- [ 8.616120] i2c i2c-0: nForce2 SMBus adapter at 0x2d00
- [ 8.616125] ACPI: resource nForce2_smbus [io 0x2e00-0x2e3f] conflicts with ACPI region SM00 [io 0x2e00-0x2e3f]
- [ 8.616127] ACPI: This conflict may cause random problems and system instability
- [ 8.616128] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 8.616147] i2c i2c-1: nForce2 SMBus adapter at 0x2e00
- [ 8.684763] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
- [ 8.732074] wmi: Mapper loaded
- [ 8.871706] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 8.878701] parport_pc 00:07: reported by Plug and Play ACPI
- [ 8.878754] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
- [ 8.887367] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input2
- [ 8.887473] generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-2/input0
- [ 8.897968] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.1/input/input3
- [ 8.898121] generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-2/input1
- [ 8.926343] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.2/input/input4
- [ 8.926519] generic-usb 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-2/input2
- [ 8.931852] input: www.irfmedia.com W-01RN USB_V3.1 as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input5
- [ 8.931959] generic-usb 0003:0755:2626.0004: input,hidraw3: USB HID v1.10 Keyboard [www.irfmedia.com W-01RN USB_V3.1] on usb-0000:00:02.0-3/input0
- [ 8.943861] input: www.irfmedia.com W-01RN USB_V3.1 as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.1/input/input6
- [ 8.944999] generic-usb 0003:0755:2626.0005: input,hidraw4: USB HID v1.10 Mouse [www.irfmedia.com W-01RN USB_V3.1] on usb-0000:00:02.0-3/input1
- [ 8.953644] generic-usb 0003:19C2:6A11.0006: hiddev0,hidraw5: USB HID v1.11 Device [(c)2006 Targa Corporation Targa USB Graphic Vacuum Fluorescent Display] on usb-0000:00:02.0-5/input0
- [ 8.953679] usbcore: registered new interface driver usbhid
- [ 8.953681] usbhid: USB HID core driver
- [ 8.968201] lp0: using parport0 (interrupt-driven).
- [ 9.047761] cfg80211: Calling CRDA to update world regulatory domain
- [ 9.080060] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
- [ 9.080257] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:19/LNXVIDEO:00/input/input7
- [ 9.080318] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
- [ 9.107130] MCE: In-kernel MCE decoding enabled.
- [ 9.121255] EDAC MC: Ver: 2.1.0
- [ 9.141878] AMD64 EDAC driver v3.4.0
- [ 9.141913] EDAC amd64: DRAM ECC disabled.
- [ 9.141916] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- [ 9.141918] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- [ 9.141919] (Note that use of the override may cause unknown side effects.)
- [ 9.163791] ppdev: user-space parallel port driver
- [ 9.244164] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
- [ 9.245071] flexcop-pci: will use the HW PID filter.
- [ 9.245074] flexcop-pci: card revision 2
- [ 9.245235] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17
- [ 9.245250] b2c2_flexcop_pci 0000:01:0a.0: PCI INT A -> Link[LNKC] -> GSI 17 (level, low) -> IRQ 17
- [ 9.260183] DVB: registering new adapter (FlexCop Digital TV device)
- [ 9.261855] b2c2-flexcop: MAC address = 00:d0:d7:0c:0a:db
- [ 9.262303] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
- [ 9.262306] CX24123: wrong demod revision: 87
- [ 9.298591] cfg80211: World regulatory domain updated:
- [ 9.298593] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 9.298596] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 9.298598] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 9.298600] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 9.298601] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 9.298603] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 9.389544] Linux video capture interface: v2.00
- [ 9.416723] saa7146: register extension 'budget_av'
- [ 9.661069] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
- [ 9.661074] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
- [ 9.661216] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
- [ 9.661221] snd_hda_intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
- [ 9.661223] hda_intel: Disabling MSI
- [ 9.661244] snd_hda_intel 0000:00:07.0: setting latency timer to 64
- [ 9.903157] b2c2-flexcop: found 'ST STV0299 DVB-S' .
- [ 9.903161] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
- [ 9.904088] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
- [ 9.909708] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16
- [ 9.909726] budget_av 0000:01:09.0: PCI INT A -> Link[LNKB] -> GSI 16 (level, low) -> IRQ 16
- [ 9.909769] saa7146: found saa7146 @ mem ffffc9000036ac00 (revision 1, irq 16) (0x153b,0x1155)
- [ 9.909772] saa7146 (0): dma buffer size 192512
- [ 9.909774] DVB: registering new adapter (TerraTec Cinergy 1200 DVB-S)
- [ 9.945061] adapter failed MAC signature check
- [ 9.945065] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
- [ 10.161237] nvidia: module license 'NVIDIA' taints kernel.
- [ 10.161241] Disabling lock debugging due to kernel taint
- [ 10.218326] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
- [ 10.218333] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 20 (level, low) -> IRQ 20
- [ 10.218341] nvidia 0000:02:00.0: setting latency timer to 64
- [ 10.218345] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 10.218911] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.51 Tue Sep 18 17:16:56 PDT 2012
- [ 10.245835] usb 2-2: ath9k_htc: Transferred FW: htc_7010.fw, size: 72992
- [ 10.248441] budget_av: KNC1-1: MAC addr = 00:0a:ac:12:89:d0
- [ 10.307812] ath9k_htc 2-2:1.0: ath9k_htc: HTC initialized with 45 credits
- [ 10.433590] ath9k_htc 2-2:1.0: ath9k_htc: FW Version: 1.3
- [ 10.433594] ath: EEPROM regdomain: 0x809c
- [ 10.433595] ath: EEPROM indicates we should expect a country code
- [ 10.433597] ath: doing EEPROM country->regdmn map search
- [ 10.433598] ath: country maps to regdmn code: 0x52
- [ 10.433600] ath: Country alpha2 being used: CN
- [ 10.433601] ath: Regpair used: 0x52
- [ 10.433604] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433607] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.433608] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433610] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.433612] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433614] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.433616] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433618] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.433619] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433621] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.433623] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433625] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.433627] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433629] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.433630] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433632] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.433634] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433636] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.433638] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433640] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.433641] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433643] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.433645] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
- [ 10.433647] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
- [ 10.433648] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
- [ 10.433812] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433815] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.433817] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433819] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.433821] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433823] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.433824] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433827] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.433828] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433830] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.433832] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433834] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.433836] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433838] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.433840] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433842] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.433844] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433846] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.433848] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433850] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.433852] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433854] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.433855] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433858] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 10.433859] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433862] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 10.433863] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.433866] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 10.466909] ieee80211 phy0: Atheros AR9287 Rev:2
- [ 10.467001] cfg80211: Calling CRDA for country: CN
- [ 10.468069] Registered led device: ath9k_htc-phy0
- [ 10.468073] usb 2-2: ath9k_htc: USB layer initialized
- [ 10.468119] usbcore: registered new interface driver ath9k_htc
- [ 10.472767] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.472771] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.472773] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.472776] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.472777] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.472780] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.472781] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.472783] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.472785] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.472787] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.472789] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.472791] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.472792] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.472794] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.472796] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.472798] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.472800] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.472802] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.472804] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.472806] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.472807] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.472809] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.472811] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.472813] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.472815] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 10.472817] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 10.472818] cfg80211: Disabling freq 2484 MHz
- [ 10.472821] cfg80211: Regulatory domain changed to country: CN
- [ 10.472823] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 10.472825] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 10.472826] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
- [ 10.556565] DVB: registering adapter 1 frontend 0 (ST STV0299 DVB-S)...
- [ 10.560010] budget_av: ci interface initialised
- [ 10.914934] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 11.460200] RPC: Registered named UNIX socket transport module.
- [ 11.460203] RPC: Registered udp transport module.
- [ 11.460205] RPC: Registered tcp transport module.
- [ 11.460206] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 11.544147] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input8
- [ 11.544345] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
- [ 11.544478] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
- [ 11.544593] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
- [ 11.544713] input: HDA NVidia Line-Out as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
- [ 11.582765] FS-Cache: Loaded
- [ 11.756911] FS-Cache: Netfs 'nfs' registered for caching
- [ 11.789303] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 11.816824] [drm] Initialized drm 1.1.0 20060810
- [ 11.838501] input: eventlircd as /devices/virtual/input/input13
- [ 12.064211] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
- [ 12.083850] init: irexec main process (985) terminated with status 1
- [ 12.083873] init: irexec main process ended, respawning
- [ 12.911740] init: vdr-frontend main process (1121) terminated with status 1
- [ 12.911761] init: vdr-frontend main process ended, respawning
- [ 12.968959] init: vdr-frontend main process (1147) terminated with status 1
- [ 12.968980] init: vdr-frontend main process ended, respawning
- [ 13.493139] NVRM: GPU at 0000:02:00: GPU-633fe5af-732a-6c2a-1f79-b6f9d88f0374
- [ 13.493146] NVRM: Your system is not currently configured to drive a VGA console
- [ 13.493149] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
- [ 13.493152] NVRM: requires the use of a text-mode VGA console. Use of other console
- [ 13.493154] NVRM: drivers including, but not limited to, vesafb, may result in
- [ 13.493156] NVRM: corruption and stability problems, and is not supported.
- [ 13.740862] wlan0: authenticate with f8:d1:11:46:ca:dc (try 1)
- [ 13.743627] wlan0: authenticated
- [ 13.851236] wlan0: associate with f8:d1:11:46:ca:dc (try 1)
- [ 13.855379] wlan0: RX AssocResp from f8:d1:11:46:ca:dc (capab=0x431 status=0 aid=2)
- [ 13.855383] wlan0: associated
- [ 13.855386] wlan0: No basic rates in AssocResp. Using min supported rate instead.
- [ 13.917694] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 13.917828] cfg80211: Calling CRDA for country: DE
- [ 13.921307] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 13.921311] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 13.921313] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 13.921315] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 13.921317] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 13.921319] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 13.921321] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 13.921323] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 13.921325] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 13.921327] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 13.921328] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 13.921330] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 13.921332] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 13.921334] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 13.921336] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 13.921338] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 13.921339] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 13.921342] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 13.921343] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 13.921345] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 13.921347] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 13.921349] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 13.921351] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 13.921353] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 13.921354] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 13.921356] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 13.921358] cfg80211: Disabling freq 2484 MHz
- [ 13.921361] cfg80211: Regulatory domain changed to country: DE
- [ 13.921362] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 13.921364] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 13.921366] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 13.921368] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 13.921370] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
- [ 14.687514] init: vdr-frontend main process (1184) terminated with status 1
- [ 14.687545] init: vdr-frontend main process ended, respawning
- [ 15.822229] init: vdr-frontend main process ended, respawning
- [ 16.618998] init: vdr-frontend main process ended, respawning
- [ 21.429824] init: failsafe main process (978) killed by TERM signal
- [ 21.751601] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
- [ 21.763273] NFSD: starting 90-second grace period
- [ 22.081743] usbcore: deregistering interface driver usbhid
- [ 22.136343] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input14
- [ 22.136420] generic-usb 0003:045E:0745.0007: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-2/input0
- [ 22.146601] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.1/input/input15
- [ 22.146719] generic-usb 0003:045E:0745.0008: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-2/input1
- [ 22.175340] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.2/input/input16
- [ 22.175478] generic-usb 0003:045E:0745.0009: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-2/input2
- [ 22.180160] aureal 0003:0755:2626.000A: fixing up Aureal Cy se W-01RN USB_V3.1 report descriptor. Keyboard Logical Maximum = 101
- [ 22.180357] input: www.irfmedia.com W-01RN USB_V3.1 as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input17
- [ 22.180431] aureal 0003:0755:2626.000A: input,hidraw3: USB HID v1.10 Keyboard [www.irfmedia.com W-01RN USB_V3.1] on usb-0000:00:02.0-3/input0
- [ 22.188456] input: www.irfmedia.com W-01RN USB_V3.1 as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.1/input/input18
- [ 22.188563] aureal 0003:0755:2626.000B: input,hidraw4: USB HID v1.10 Mouse [www.irfmedia.com W-01RN USB_V3.1] on usb-0000:00:02.0-3/input1
- [ 22.188584] usbcore: registered new interface driver usbhid
- [ 22.188585] usbhid: USB HID core driver
- [ 22.214270] init: plymouth-stop pre-start process (1943) terminated with status 1
- [ 22.301082] input: eventlircd as /devices/virtual/input/input19
- [ 24.512045] wlan0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement