Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 6.799446] ahci 0000:00:1f.2: setting latency timer to 64
- [ 6.811502] scsi0 : ahci
- [ 6.811756] scsi1 : ahci
- [ 6.811976] scsi2 : ahci
- [ 6.812202] scsi3 : ahci
- [ 6.812465] ata1: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305100 irq 45
- [ 6.812468] ata2: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305180 irq 45
- [ 6.812469] ata3: DUMMY
- [ 6.812470] ata4: DUMMY
- [ 7.370067] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 7.415282] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
- [ 7.415285] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 7.417969] ata1.00: configured for UDMA/133
- [ 7.418080] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
- [ 7.418630] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 7.418732] sd 0:0:0:0: [sda] Write Protect is off
- [ 7.418735] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 7.418755] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 7.459584] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
- [ 7.460733] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 7.960060] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 7.961887] ata2.00: ATAPI: Optiarc DVD RW AD-7700S, 1.B0, max UDMA/100
- [ 7.968567] ata2.00: configured for UDMA/100
- [ 7.984187] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7700S 1.B0 PQ: 0 ANSI: 5
- [ 8.001184] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 8.001186] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 8.001499] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 8.152434] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 8.152583] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 8.355592] scsi: <fdomain> Detection failed (no card)
- [ 8.415998] GDT-HA: Storage RAID Controller Driver. Version: 3.05
- [ 8.528820] imm: Version 2.05 (for Linux 2.4.0)
- [ 8.708681] Fusion MPT base driver 3.04.20
- [ 8.708685] Copyright (c) 1999-2008 LSI Corporation
- [ 8.772324] Fusion MPT SPI Host driver 3.04.20
- [ 8.819310] Fusion MPT FC Host driver 3.04.20
- [ 8.858736] Fusion MPT SAS Host driver 3.04.20
- [ 8.889872] 3ware Storage Controller device driver for Linux v1.26.02.003.
- [ 8.921011] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
- [ 8.952065] Compaq SMART2 Driver (v 2.6.0)
- [ 9.031923] HP CISS Driver (v 3.6.26)
- [ 9.130559] Adaptec aacraid driver 1.2-0[30200]-ms
- [ 9.201132] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
- [ 9.202709] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
- [ 9.271153] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
- [ 9.310305] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.05.00.03-k.
- [ 9.355742] Emulex LightPulse Fibre Channel SCSI driver 8.3.39
- [ 9.355745] Copyright(c) 2004-2009 Emulex. All rights reserved.
- [ 9.439088] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
- [ 9.498688] ACPI: bus type USB registered
- [ 9.498933] usbcore: registered new interface driver usbfs
- [ 9.499054] usbcore: registered new interface driver hub
- [ 9.499138] usbcore: registered new device driver usb
- [ 9.501412] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 9.503818] ehci-pci: EHCI PCI platform driver
- [ 9.504087] ehci-pci 0000:00:1a.7: enabling bus mastering
- [ 9.504093] ehci-pci 0000:00:1a.7: setting latency timer to 64
- [ 9.504116] ehci-pci 0000:00:1a.7: EHCI Host Controller
- [ 9.504125] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 9.504142] ehci-pci 0000:00:1a.7: debug port 1
- [ 9.508054] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
- [ 9.508074] ehci-pci 0000:00:1a.7: irq 21, io mem 0xdb305c00
- [ 9.520060] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 9.520085] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 9.520087] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 9.520089] usb usb1: Product: EHCI Host Controller
- [ 9.520091] usb usb1: Manufacturer: Linux 3.10.1-pf ehci_hcd
- [ 9.520093] usb usb1: SerialNumber: 0000:00:1a.7
- [ 9.520439] hub 1-0:1.0: USB hub found
- [ 9.520446] hub 1-0:1.0: 4 ports detected
- [ 9.520844] ehci-pci 0000:00:1d.7: enabling bus mastering
- [ 9.520850] ehci-pci 0000:00:1d.7: setting latency timer to 64
- [ 9.520860] ehci-pci 0000:00:1d.7: EHCI Host Controller
- [ 9.520868] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 9.520883] ehci-pci 0000:00:1d.7: debug port 1
- [ 9.524777] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
- [ 9.524797] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdb305800
- [ 9.540046] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 9.540071] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 9.540073] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 9.540075] usb usb2: Product: EHCI Host Controller
- [ 9.540077] usb usb2: Manufacturer: Linux 3.10.1-pf ehci_hcd
- [ 9.540079] usb usb2: SerialNumber: 0000:00:1d.7
- [ 9.540431] hub 2-0:1.0: USB hub found
- [ 9.540438] hub 2-0:1.0: 8 ports detected
- [ 9.625077] usbcore: registered new interface driver usb-storage
- [ 9.664861] uhci_hcd: USB Universal Host Controller Interface driver
- [ 9.665103] uhci_hcd 0000:00:1a.0: enabling bus mastering
- [ 9.665108] uhci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 9.665112] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 9.665120] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 9.665164] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000070e0
- [ 9.665201] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 9.665204] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 9.665206] usb usb3: Product: UHCI Host Controller
- [ 9.665208] usb usb3: Manufacturer: Linux 3.10.1-pf uhci_hcd
- [ 9.665209] usb usb3: SerialNumber: 0000:00:1a.0
- [ 9.665508] hub 3-0:1.0: USB hub found
- [ 9.665513] hub 3-0:1.0: 2 ports detected
- [ 9.665846] uhci_hcd 0000:00:1a.1: enabling bus mastering
- [ 9.665852] uhci_hcd 0000:00:1a.1: setting latency timer to 64
- [ 9.665855] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 9.665862] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- [ 9.665891] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000070c0
- [ 9.665925] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 9.665928] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 9.665930] usb usb4: Product: UHCI Host Controller
- [ 9.665931] usb usb4: Manufacturer: Linux 3.10.1-pf uhci_hcd
- [ 9.665933] usb usb4: SerialNumber: 0000:00:1a.1
- [ 9.666246] hub 4-0:1.0: USB hub found
- [ 9.666251] hub 4-0:1.0: 2 ports detected
- [ 9.666585] uhci_hcd 0000:00:1d.0: enabling bus mastering
- [ 9.666591] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 9.666594] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 9.666601] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
- [ 9.666630] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000070a0
- [ 9.666663] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 9.666665] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 9.666667] usb usb5: Product: UHCI Host Controller
- [ 9.666669] usb usb5: Manufacturer: Linux 3.10.1-pf uhci_hcd
- [ 9.666671] usb usb5: SerialNumber: 0000:00:1d.0
- [ 9.667005] hub 5-0:1.0: USB hub found
- [ 9.667011] hub 5-0:1.0: 2 ports detected
- [ 9.667348] uhci_hcd 0000:00:1d.1: enabling bus mastering
- [ 9.667354] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 9.667357] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 9.667365] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
- [ 9.667407] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00007080
- [ 9.667442] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- [ 9.667444] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 9.667446] usb usb6: Product: UHCI Host Controller
- [ 9.667448] usb usb6: Manufacturer: Linux 3.10.1-pf uhci_hcd
- [ 9.667450] usb usb6: SerialNumber: 0000:00:1d.1
- [ 9.667773] hub 6-0:1.0: USB hub found
- [ 9.667779] hub 6-0:1.0: 2 ports detected
- [ 9.668093] uhci_hcd 0000:00:1d.2: enabling bus mastering
- [ 9.668099] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 9.668102] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 9.668109] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
- [ 9.668138] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00007060
- [ 9.668174] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
- [ 9.668176] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 9.668178] usb usb7: Product: UHCI Host Controller
- [ 9.668180] usb usb7: Manufacturer: Linux 3.10.1-pf uhci_hcd
- [ 9.668182] usb usb7: SerialNumber: 0000:00:1d.2
- [ 9.668494] hub 7-0:1.0: USB hub found
- [ 9.668500] hub 7-0:1.0: 2 ports detected
- [ 9.668819] uhci_hcd 0000:00:1d.3: enabling bus mastering
- [ 9.668825] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 9.668828] uhci_hcd 0000:00:1d.3: UHCI Host Controller
- [ 9.668835] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
- [ 9.668877] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00007040
- [ 9.668912] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
- [ 9.668914] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 9.668916] usb usb8: Product: UHCI Host Controller
- [ 9.668918] usb usb8: Manufacturer: Linux 3.10.1-pf uhci_hcd
- [ 9.668920] usb usb8: SerialNumber: 0000:00:1d.3
- [ 9.669263] hub 8-0:1.0: USB hub found
- [ 9.669269] hub 8-0:1.0: 2 ports detected
- [ 9.709838] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 9.794474] usbcore: registered new interface driver usbhid
- [ 9.794476] usbhid: USB HID core driver
- [ 9.860059] usb 2-4: new high-speed USB device number 2 using ehci-pci
- [ 10.048132] usb 2-4: New USB device found, idVendor=04f2, idProduct=b044
- [ 10.048136] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
- [ 10.048138] usb 2-4: Product: Video WebCam
- [ 10.048140] usb 2-4: Manufacturer: Chicony Electronics Co., Ltd.
- [ 10.048142] usb 2-4: SerialNumber: SN0001
- [ 10.198132] RPC: Registered named UNIX socket transport module.
- [ 10.198135] RPC: Registered udp transport module.
- [ 10.198136] RPC: Registered tcp transport module.
- [ 10.198137] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 10.250325] fuse init (API version 7.22)
- [ 10.293089] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 10.293094] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 10.337714] Loading iSCSI transport class v2.0-870.
- [ 10.628277] TuxOnIce: No image found.
- [ 10.628794] Restarting tasks ... done.
- [ 10.628979] CPU: 0 PID: 12872 Comm: echo Not tainted 3.10.1-pf #3
- [ 10.628980] Hardware name: Acer Aspire 4736Z /Aspire 4736Z , BIOS V2.08 01/18/2010
- [ 10.628982] 0000000000001000 ffff8800b7c29d88 ffffffff81366d3c ffff8800b7c29da8
- [ 10.628985] ffffffff81052740 ffff8800b7aae000 0000000000000026 ffff8800b7c29dc8
- [ 10.628988] ffffffff810527e0 ffffffff814d3750 0000000000000008 ffff8800b7c29dd8
- [ 10.628991] Call Trace:
- [ 10.628999] [<ffffffff81366d3c>] dump_stack+0x19/0x1b
- [ 10.629004] [<ffffffff81052740>] free_update_stats+0x36/0x6f
- [ 10.629006] [<ffffffff810527e0>] toi_free_page+0x25/0x42
- [ 10.629009] [<ffffffff8105ec89>] forget_signature_page+0x5c/0xc1
- [ 10.629014] [<ffffffff8105cbe9>] toi_bio_cleanup+0x2e/0x6a
- [ 10.629016] [<ffffffff81052377>] toi_cleanup_modules+0x30/0x50
- [ 10.629018] [<ffffffff81053f93>] toi_finish_anything+0xd/0x80
- [ 10.629021] [<ffffffff81052d67>] toi_attr_store+0x225/0x24c
- [ 10.629026] [<ffffffff81123b2a>] sysfs_write_file+0xe1/0x117
- [ 10.629030] [<ffffffff810d0ce6>] vfs_write+0xc6/0x172
- [ 10.629032] [<ffffffff810d1060>] SyS_write+0x44/0x75
- [ 10.629035] [<ffffffff8136b296>] system_call_fastpath+0x1a/0x1f
- [ 10.629038] Idx Allocs Frees Tests Fails Max Description
- [ 10.629040] 38 0 1 0 0 0 setting swap signature
- [ 10.697408] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- [ 13.932962] systemd-udevd[13073]: starting version 207
- [ 14.750617] rtc_cmos 00:02: RTC can wake from S4
- [ 14.750786] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
- [ 14.750817] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
- [ 15.520101] acpi device:03: registered as cooling_device2
- [ 15.520175] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
- [ 15.520235] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
- [ 15.770410] atl1c 0000:05:00.0: version 1.0.1.1-NAPI
- [ 15.778972] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
- [ 15.863175] input: PC Speaker as /devices/platform/pcspkr/input/input7
- [ 15.931145] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
- [ 16.045909] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
- [ 16.046405] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 16.180238] systemd-udevd[13092]: renamed network interface eth0 to enp5s0
- [ 16.296067] cfg80211: Calling CRDA to update world regulatory domain
- [ 16.362048] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
- [ 16.503633] [drm] Initialized drm 1.1.0 20060810
- [ 16.884531] ath: EEPROM regdomain: 0x65
- [ 16.884534] ath: EEPROM indicates we should expect a direct regpair map
- [ 16.884537] ath: Country alpha2 being used: 00
- [ 16.884538] ath: Regpair used: 0x65
- [ 17.083797] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 17.084168] BUG: unable to handle kernel NULL pointer dereference at 000000000000001d
- [ 17.084511] IP: [<ffffffff8109508e>] relay_open_buf.part.11+0x208/0x26b
- [ 17.084792] PGD b7917067 PUD b7b44067 PMD 0
- [ 17.084947] Oops: 0000 [#1] SMP
- [ 17.085043] Modules linked in: arc4 mperf coretemp drm ath9k(+) ath9k_common ath9k_hw snd_hda_codec_hdmi ath mac80211 cfg80211 snd_hda_codec_realtek joydev i2c_i801 rfkill i2c_core microcode pcspkr led_class snd_hda_intel snd_hda_codec atl1c intel_agp intel_gtt snd_hwdep snd_pcm snd_page_alloc snd_timer snd video rtc_cmos backlight xts gf128mul aes_x86_64 cbc sha256_generic libiscsi scsi_transport_iscsi e1000 fuse nfs lockd sunrpc hid_sunplus hid_sony hid_samsung hid_pl hid_petalynx hid_gyration sl811_hcd usbhid xhci_hcd ohci_hcd uhci_hcd usb_storage ehci_pci ehci_hcd usbcore usb_common aic94xx libsas lpfc crc_t10dif qla2xxx megaraid_sas megaraid_mbox megaraid_mm megaraid aacraid sx8 DAC960 cciss 3w_9xxx 3w_xxxx mptsas scsi_transport_sas mptfc scsi_transport_fc scsi_tgt mptspi mptscsih mptbase atp870u
- [ 17.088490] dc395x qla1280 imm parport dmx3191d sym53c8xx gdth advansys initio BusLogic arcmsr aic7xxx aic79xx scsi_transport_spi sg pdc_adma sata_inic162x sata_mv ata_piix ahci libahci sata_qstor sata_vsc sata_uli sata_sis sata_sx4 sata_nv sata_via sata_svw sata_sil24 sata_sil sata_promise pata_sl82c105 pata_cs5530 pata_cs5520 pata_via pata_jmicron pata_marvell pata_sis pata_netcell pata_sc1200 pata_pdc202xx_old pata_triflex pata_atiixp pata_opti pata_amd pata_ali pata_it8213 pata_ns87415 pata_ns87410 pata_serverworks pata_artop pata_it821x pata_optidma pata_hpt3x2n pata_hpt3x3 pata_hpt37x pata_hpt366 pata_cmd64x pata_efar pata_rz1000 pata_sil680 pata_radisys pata_pdc2027x pata_mpiix libata
- [ 17.090010] CPU: 0 PID: 13098 Comm: udevd Not tainted 3.10.1-pf #3
- [ 17.090010] Hardware name: Acer Aspire 4736Z /Aspire 4736Z , BIOS V2.08 01/18/2010
- [ 17.090010] task: ffff8800b81eb450 ti: ffff8800b7aa4000 task.ti: ffff8800b7aa4000
- [ 17.090010] RIP: 0010:[<ffffffff8109508e>] [<ffffffff8109508e>] relay_open_buf.part.11+0x208/0x26b
- [ 17.090010] RSP: 0000:ffff8800b7aa59c8 EFLAGS: 00010286
- [ 17.090010] RAX: ffffffffffffffed RBX: ffff8800b8098700 RCX: 000000000000c9ae
- [ 17.090010] RDX: 0000000000000000 RSI: ffff8800bf813ba0 RDI: ffff8800bbc01900
- [ 17.090010] RBP: ffff8800b7aa5a08 R08: ffffea0002e02600 R09: 0000000080090200
- [ 17.090010] R10: 0000000080090200 R11: ffffffff8109425c R12: ffff8800b8082800
- [ 17.090010] R13: 0000000000000040 R14: 0000000000000000 R15: 0000000000000040
- [ 17.090010] FS: 00007f222c8b3780(0000) GS:ffff8800bf800000(0000) knlGS:0000000000000000
- [ 17.090010] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
- [ 17.090010] CR2: 000000000000001d CR3: 00000000b67f1000 CR4: 00000000000407f0
- [ 17.090010] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
- [ 17.090010] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
- [ 17.090010] Stack:
- [ 17.090010] 000000000000003f ffff8800b77011f8 0000000000000400 ffff8800b8082800
- [ 17.090010] 0000000000000000 0000000000040000 0000000000000400 ffffffffa08c8c7e
- [ 17.090010] ffff8800b7aa5a58 ffffffff810953c4 0000000000000000 ffffffffffffffed
- [ 17.090010] Call Trace:
- [ 17.090010] [<ffffffff810953c4>] relay_open+0x15d/0x234
- [ 17.090010] [<ffffffffa08c50dd>] ath9k_init_debug+0x39/0x48 [ath9k]
- [ 17.090010] [<ffffffffa08b8a83>] ath9k_init_device+0x721/0x8a8 [ath9k]
- [ 17.090010] [<ffffffff8108f3f5>] ? request_threaded_irq+0xe0/0x12d
- [ 17.090010] [<ffffffffa08c3ee6>] ath_pci_probe+0x210/0x2ae [ath9k]
- [ 17.090010] [<ffffffff812681a5>] ? __pm_runtime_resume+0x4b/0x59
- [ 17.090010] [<ffffffff811de29e>] pci_device_probe+0x6b/0xb1
- [ 17.090010] [<ffffffff8125f511>] ? driver_probe_device+0x1c6/0x1c6
- [ 17.090010] [<ffffffff8125f3e5>] driver_probe_device+0x9a/0x1c6
- [ 17.090010] [<ffffffff8125f56b>] __driver_attach+0x5a/0x7e
- [ 17.090010] [<ffffffff8125db20>] bus_for_each_dev+0x54/0x86
- [ 17.090010] [<ffffffff8125ef92>] driver_attach+0x19/0x1b
- [ 17.090010] [<ffffffff8125eb8b>] bus_add_driver+0xe3/0x207
- [ 17.090010] [<ffffffff8125faf3>] driver_register+0x8e/0x114
- [ 17.090010] [<ffffffffa07fddae>] ? ieee80211_rate_control_register+0x81/0xcf [mac80211]
- [ 17.090010] [<ffffffff811de3a9>] __pci_register_driver+0x46/0x48
- [ 17.090010] [<ffffffffa08c409c>] ath_pci_init+0x1e/0x20 [ath9k]
- [ 17.090010] [<ffffffffa08cd028>] ath9k_init+0x28/0x4a [ath9k]
- [ 17.090010] [<ffffffffa08cd000>] ? 0xffffffffa08ccfff
- [ 17.090010] [<ffffffff81000263>] do_one_initcall+0x7b/0x10c
- [ 17.090010] [<ffffffff81077f8f>] load_module+0x1ab5/0x1d90
- [ 17.090010] [<ffffffff81074aa4>] ? sys_getegid16+0x44/0x44
- [ 17.090010] [<ffffffff81075227>] ? copy_module_from_fd+0xbc/0xd4
- [ 17.090010] [<ffffffff8107835b>] SyS_finit_module+0x56/0x6c
- [ 17.090010] [<ffffffff8136b296>] system_call_fastpath+0x1a/0x1f
- [ 17.090010] Code: 48 89 df e8 ba 75 03 00 eb 61 44 89 f2 48 89 de 4c 89 e7 e8 61 f1 ff ff 48 85 c0 74 46 48 89 83 80 00 00 00 48 8b 93 b8 00 00 00 <48> 8b 40 30 48 89 50 48 44 89 b3 c0 00 00 00 be 01 00 00 00 48
- [ 17.090010] RIP [<ffffffff8109508e>] relay_open_buf.part.11+0x208/0x26b
- [ 17.090010] RSP <ffff8800b7aa59c8>
- [ 17.090010] CR2: 000000000000001d
- [ 17.314844] ---[ end trace f1f5bbb86d16392f ]---
- [ 17.350208] systemd-udevd[13089]: renamed network interface wlan0 to wlp4s0
- [ 17.497740] nvidia: module license 'NVIDIA' taints kernel.
- [ 18.190225] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 18.231785] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
- [ 18.241130] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 325.15 Wed Jul 31 18:50:56 PDT 2013
- [ 18.252642] nvidia 0000:01:00.0: irq 47 for MSI/MSI-X
- [ 19.326365] NVRM: Your system is not currently configured to drive a VGA console
- [ 19.335352] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
- [ 19.344296] NVRM: requires the use of a text-mode VGA console. Use of other console
- [ 19.353307] NVRM: drivers including, but not limited to, vesafb, may result in
- [ 19.362494] NVRM: corruption and stability problems, and is not supported.
- [ 21.332346] EXT4-fs (sda3): re-mounted. Opts: (null)
- [ 21.514478] Adding 3144700k swap on /dev/sda1. Priority:-1 extents:1 across:3144700k
- [ 21.631325] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
- [ 21.721673] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
- [ 26.737636] atl1c 0000:05:00.0: irq 47 for MSI/MSI-X
- [ 29.360517] wlp4s0: authenticate with 64:70:02:ba:6f:8e
- [ 29.392772] wlp4s0: send auth to 64:70:02:ba:6f:8e (try 1/3)
- [ 29.407777] wlp4s0: authenticated
- [ 29.430037] wlp4s0: associate with 64:70:02:ba:6f:8e (try 1/3)
- [ 29.443260] wlp4s0: RX AssocResp from 64:70:02:ba:6f:8e (capab=0x411 status=0 aid=1)
- [ 29.452862] wlp4s0: associated
- [ 31.389338] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
- [ 54.226368] ata1.00: configured for UDMA/133
- [ 54.226374] ata1: EH complete
- [ 54.698094] EXT4-fs (sda3): re-mounted. Opts: commit=0
- [ 54.701503] EXT4-fs (sda5): re-mounted. Opts: commit=0
- [ 54.962094] EXT4-fs (sda6): re-mounted. Opts: commit=0
- [ 80.395127] NET: Registered protocol family 10
- [ 80.395470] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
- [ 164.784547] ata1.00: exception Emask 0x10 SAct 0x4 SErr 0x10000 action 0xe frozen
- [ 164.784551] ata1.00: irq_stat 0x00400008, PHY RDY changed
- [ 164.784553] ata1: SError: { PHYRdyChg }
- [ 164.784556] ata1.00: failed command: READ FPDMA QUEUED
- [ 164.784561] ata1.00: cmd 60/08:10:a8:27:ea/00:00:01:00:00/40 tag 2 ncq 4096 in
- res 40/00:14:a8:27:ea/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
- [ 164.784563] ata1.00: status: { DRDY }
- [ 164.784568] ata1: hard resetting link
- [ 165.740056] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 165.790587] ata1.00: configured for UDMA/133
- [ 165.810059] ata1: EH complete
- [ 165.890995] ehci-pci 0000:00:1a.7: PME# enabled
- [ 166.121882] EXT4-fs (sda3): re-mounted. Opts: commit=600
- [ 166.141994] EXT4-fs (sda5): re-mounted. Opts: commit=600
- [ 166.297051] EXT4-fs (sda6): re-mounted. Opts: commit=600
- [ 386.874743] ata1: hard resetting link
- [ 387.430073] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 387.478405] ata1.00: configured for UDMA/133
- [ 387.478497] ata1: EH complete
- [ 387.478665] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 387.769567] EXT4-fs (sda3): re-mounted. Opts: commit=600
- [ 387.773764] EXT4-fs (sda5): re-mounted. Opts: commit=600
- [ 388.194037] EXT4-fs (sda6): re-mounted. Opts: commit=600
- [ 652.673260] ata1.00: configured for UDMA/133
- [ 652.673266] ata1: EH complete
- [ 652.690817] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 652.814133] EXT4-fs (sda3): re-mounted. Opts: commit=0
- [ 652.818523] EXT4-fs (sda5): re-mounted. Opts: commit=0
- [ 652.984817] EXT4-fs (sda6): re-mounted. Opts: commit=0
- [ 3288.620503] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
- [ 3288.620507] ata1.00: irq_stat 0x00400001, PHY RDY changed
- [ 3288.620510] ata1: SError: { PHYRdyChg CommWake }
- [ 3288.620512] ata1.00: failed command: SET FEATURES
- [ 3288.620517] ata1.00: cmd ef/05:01:00:00:00/00:00:00:00:00/40 tag 0
- res 50/00:01:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
- [ 3288.620519] ata1.00: status: { DRDY }
- [ 3288.620525] ata1: hard resetting link
- [ 3289.045176] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
- [ 3289.045180] ata2.00: irq_stat 0x00400001, PHY RDY changed
- [ 3289.045182] ata2: SError: { PHYRdyChg CommWake }
- [ 3289.045186] sr 1:0:0:0: CDB:
- [ 3289.045188] cdb[0]=0x4a: 4a 01 00 00 10 00 00 00 08 00
- [ 3289.045198] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
- res 50/00:03:00:08:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 3289.045200] ata2.00: status: { DRDY }
- [ 3289.045206] ata2: hard resetting link
- [ 3289.600060] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3289.649200] ata1.00: configured for UDMA/133
- [ 3289.670041] ata1: EH complete
- [ 3289.727841] ata1.00: configured for UDMA/133
- [ 3289.727846] ata1: EH complete
- [ 3289.727942] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 3289.818159] EXT4-fs (sda3): re-mounted. Opts: commit=600
- [ 3289.828213] EXT4-fs (sda5): re-mounted. Opts: commit=600
- [ 3289.888543] EXT4-fs (sda6): re-mounted. Opts: commit=600
- [ 3290.000060] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 3290.008524] ata2.00: configured for UDMA/100
- [ 3290.030067] ata2: EH complete
- [ 3292.537999] ata1.00: configured for UDMA/133
- [ 3292.538004] ata1: EH complete
- [ 3292.538099] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3292.614614] EXT4-fs (sda3): re-mounted. Opts: commit=0
- [ 3292.620865] EXT4-fs (sda5): re-mounted. Opts: commit=0
- [ 3292.748273] EXT4-fs (sda6): re-mounted. Opts: commit=0
- [ 4964.666594] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe frozen
- [ 4964.666600] ata1.00: irq_stat 0x00400001, PHY RDY changed
- [ 4964.666604] ata1: SError: { PHYRdyChg }
- [ 4964.666608] ata1.00: failed command: SET FEATURES
- [ 4964.666616] ata1.00: cmd ef/05:01:00:00:00/00:00:00:00:00/40 tag 0
- res 50/00:01:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
- [ 4964.666620] ata1.00: status: { DRDY }
- [ 4964.666630] ata1: hard resetting link
- [ 4965.525194] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe frozen
- [ 4965.525198] ata2.00: irq_stat 0x00400001, PHY RDY changed
- [ 4965.525201] ata2: SError: { PHYRdyChg }
- [ 4965.525206] sr 1:0:0:0: CDB:
- [ 4965.525207] cdb[0]=0x4a: 4a 01 00 00 10 00 00 00 08 00
- [ 4965.525217] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
- res 50/00:03:00:08:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 4965.525219] ata2.00: status: { DRDY }
- [ 4965.525224] ata2: hard resetting link
- [ 4965.610038] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 4965.662866] ata1.00: configured for UDMA/133
- [ 4965.680036] ata1: EH complete
- [ 4965.740888] ata1.00: configured for UDMA/133
- [ 4965.740894] ata1: EH complete
- [ 4965.740995] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 4965.826851] EXT4-fs (sda3): re-mounted. Opts: commit=600
- [ 4965.832953] EXT4-fs (sda5): re-mounted. Opts: commit=600
- [ 4965.902349] EXT4-fs (sda6): re-mounted. Opts: commit=600
- [ 4966.470054] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 4966.478534] ata2.00: configured for UDMA/100
- [ 4966.500067] ata2: EH complete
- [ 4977.924235] ata1.00: configured for UDMA/133
- [ 4977.924241] ata1: EH complete
- [ 4977.924343] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 4977.986042] EXT4-fs (sda3): re-mounted. Opts: commit=0
- [ 4977.992435] EXT4-fs (sda5): re-mounted. Opts: commit=0
- [ 4978.130458] EXT4-fs (sda6): re-mounted. Opts: commit=0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement