API tools faq
paste
Guest User

Untitled

a guest
Sep 15th, 2011
97
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 55.75 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 2.6.38.3-stuw+ (stuw@slack-vm) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #42 SMP PREEMPT Thu Sep 15 20:25:31 MSD 2011
  4. [ 0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387f
  5. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] Machine: Toshiba AC100 / Dynabook AZ
  7. [ 0.000000] PreMemHdl 0 00000008 1fd95000 00258800 0000000a
  8. [ 0.000000] FRAMEBUFFER 00000018 00010000 00258800 101a880a 02580400 02010800 00000000 00000007
  9. [ 0.000000] DISPLAY 0000000c 00000000 00000000 00000001 00000006
  10. [ 0.000000] PreMemHdl 1 00000008 1fd7d000 00002000 00000016
  11. [ 0.000000] CHIPSHMOO 00000048 00010001 00000000 00000014 00000014 000005ac 000005c0 00000028 000005e8 00000028 00000610 00000018 00000628 0000002c 00010001 ad2f9361 000003f2 00000000 00000000 00000006
  12. [ 0.000000] PreMemHdl 2 00000008 1fd7aff0 00002000 00000005
  13. [ 0.000000] WARMBOOT 00000004 00010002 00000000
  14. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  15. [ 0.000000] On node 0 totalpages: 114688
  16. [ 0.000000] free_area_init_node: node 0, pgdat c05b09a0, node_mem_map c062e000
  17. [ 0.000000] Normal zone: 896 pages used for memmap
  18. [ 0.000000] Normal zone: 0 pages reserved
  19. [ 0.000000] Normal zone: 113792 pages, LIFO batch:31
  20. [ 0.000000] Tegra Revision: A02 SKU: 8 CPU Process: 1 Core Process: 1 Speedo ID: 0
  21. [ 0.000000] tegra2_cdev_clk_init: name: cdev1, clk_reg: 0, bit: 1073741824, reg: 018
  22. [ 0.000000] tegra2_cdev_clk_init: name: cdev1, state=OFF
  23. [ 0.000000] tegra_pinmux_get_func: pg: 0, mux_reg: 0x80, mux_bit: 24, reg_val: 0x2a3234f, mux_val: 2, func: 13
  24. [ 0.000000] tegra2_cdev_clk_init: check input: clk_m, val: 25, need: 13
  25. [ 0.000000] tegra2_cdev_clk_init: check input: pll_a_out0, val: 28, need: 13
  26. [ 0.000000] tegra2_cdev_clk_init: check input: pll_m_out1, val: 30, need: 13
  27. [ 0.000000] tegra2_cdev_clk_init: check input: audio, val: 2, need: 13
  28. [ 0.000000] tegra2_cdev_clk_init: name: cdev1. have no parent
  29. [ 0.000000] tegra2_cdev_clk_init: name: cdev2, clk_reg: 0, bit: 536870912, reg: 018
  30. [ 0.000000] tegra2_cdev_clk_init: name: cdev2, state=OFF
  31. [ 0.000000] tegra_pinmux_get_func: pg: 0, mux_reg: 0x80, mux_bit: 24, reg_val: 0x2a3234f, mux_val: 2, func: 13
  32. [ 0.000000] tegra2_cdev_clk_init: check input: clk_m, val: 25, need: 13
  33. [ 0.000000] tegra2_cdev_clk_init: check input: pll_p_out4, val: 33, need: 13
  34. [ 0.000000] tegra2_cdev_clk_init: name: cdev2. have no parent
  35. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 0, need: 0
  36. [ 0.000000] tegra2_periph_clk_init: name: emc. input: pll_m
  37. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 0
  38. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 2, need: 0
  39. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 0
  40. [ 0.000000] tegra2_periph_clk_init: check input: pll_a_out0, val: 0, need: 3
  41. [ 0.000000] tegra2_periph_clk_init: check input: audio_2x, val: 1, need: 3
  42. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 2, need: 3
  43. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  44. [ 0.000000] tegra2_periph_clk_init: name: i2s1. input: clk_m
  45. [ 0.000000] tegra2_periph_clk_init: check input: pll_a_out0, val: 0, need: 3
  46. [ 0.000000] tegra2_periph_clk_init: check input: audio_2x, val: 1, need: 3
  47. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 2, need: 3
  48. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  49. [ 0.000000] tegra2_periph_clk_init: name: i2s2. input: clk_m
  50. [ 0.000000] tegra2_periph_clk_init: check input: pll_a_out0, val: 0, need: 3
  51. [ 0.000000] tegra2_periph_clk_init: check input: audio_2x, val: 1, need: 3
  52. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 2, need: 3
  53. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  54. [ 0.000000] tegra2_periph_clk_init: name: spdif_out. input: clk_m
  55. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 0
  56. [ 0.000000] tegra2_periph_clk_init: name: spdif_in. input: pll_p
  57. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 0
  58. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 0
  59. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  60. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  61. [ 0.000000] tegra2_periph_clk_init: check input: audio, val: 2, need: 3
  62. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  63. [ 0.000000] tegra2_periph_clk_init: name: pwm. input: clk_m
  64. [ 0.000000] tegra2_periph_clk_init: check input: clk_32k, val: 4, need: 3
  65. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  66. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  67. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  68. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  69. [ 0.000000] tegra2_periph_clk_init: name: spi. input: clk_m
  70. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  71. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  72. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  73. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  74. [ 0.000000] tegra2_periph_clk_init: name: xio. input: clk_m
  75. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  76. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  77. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  78. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  79. [ 0.000000] tegra2_periph_clk_init: name: twc. input: clk_m
  80. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  81. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  82. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  83. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  84. [ 0.000000] tegra2_periph_clk_init: name: sbc1. input: clk_m
  85. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  86. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  87. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  88. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  89. [ 0.000000] tegra2_periph_clk_init: name: sbc2. input: clk_m
  90. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  91. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  92. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  93. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  94. [ 0.000000] tegra2_periph_clk_init: name: sbc3. input: clk_m
  95. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  96. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  97. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  98. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  99. [ 0.000000] tegra2_periph_clk_init: name: sbc4. input: clk_m
  100. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  101. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  102. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  103. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  104. [ 0.000000] tegra2_periph_clk_init: name: ide. input: clk_m
  105. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  106. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  107. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  108. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  109. [ 0.000000] tegra2_periph_clk_init: name: ndflash. input: clk_m
  110. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  111. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  112. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  113. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  114. [ 0.000000] tegra2_periph_clk_init: name: vfir. input: clk_m
  115. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  116. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  117. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  118. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  119. [ 0.000000] tegra2_periph_clk_init: name: sdmmc1. input: clk_m
  120. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  121. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  122. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  123. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  124. [ 0.000000] tegra2_periph_clk_init: name: sdmmc2. input: clk_m
  125. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  126. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  127. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  128. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  129. [ 0.000000] tegra2_periph_clk_init: name: sdmmc3. input: clk_m
  130. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 0
  131. [ 0.000000] tegra2_periph_clk_init: name: sdmmc4. input: pll_p
  132. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 0
  133. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 0
  134. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 0
  135. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 1
  136. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 1
  137. [ 0.000000] tegra2_periph_clk_init: name: vde. input: pll_c
  138. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 1
  139. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 1
  140. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 0
  141. [ 0.000000] tegra2_periph_clk_init: name: csite. input: pll_p
  142. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 0
  143. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 0
  144. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 0
  145. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  146. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  147. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  148. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  149. [ 0.000000] tegra2_periph_clk_init: name: la. input: clk_m
  150. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  151. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  152. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  153. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  154. [ 0.000000] tegra2_periph_clk_init: name: owr. input: clk_m
  155. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  156. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  157. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  158. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  159. [ 0.000000] tegra2_periph_clk_init: name: nor. input: clk_m
  160. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  161. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  162. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  163. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  164. [ 0.000000] tegra2_periph_clk_init: name: mipi. input: clk_m
  165. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  166. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  167. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  168. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  169. [ 0.000000] tegra2_periph_clk_init: name: i2c1. input: clk_m
  170. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  171. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  172. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  173. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  174. [ 0.000000] tegra2_periph_clk_init: name: i2c2. input: clk_m
  175. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  176. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  177. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  178. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  179. [ 0.000000] tegra2_periph_clk_init: name: i2c3. input: clk_m
  180. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  181. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  182. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  183. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  184. [ 0.000000] tegra2_periph_clk_init: name: dvc. input: clk_m
  185. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 0
  186. [ 0.000000] tegra2_periph_clk_init: name: uarta. input: pll_p
  187. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 0
  188. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 0
  189. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 0
  190. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  191. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  192. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  193. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  194. [ 0.000000] tegra2_periph_clk_init: name: uartb. input: clk_m
  195. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  196. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  197. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  198. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  199. [ 0.000000] tegra2_periph_clk_init: name: uartc. input: clk_m
  200. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 0
  201. [ 0.000000] tegra2_periph_clk_init: name: uartd. input: pll_p
  202. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 0
  203. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 0
  204. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 0
  205. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  206. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 3
  207. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 2, need: 3
  208. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  209. [ 0.000000] tegra2_periph_clk_init: name: uarte. input: clk_m
  210. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 0, need: 0
  211. [ 0.000000] tegra2_periph_clk_init: name: 3d. input: pll_m
  212. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 0
  213. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 2, need: 0
  214. [ 0.000000] tegra2_periph_clk_init: check input: pll_a_out0, val: 3, need: 0
  215. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 0, need: 0
  216. [ 0.000000] tegra2_periph_clk_init: name: 2d. input: pll_m
  217. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 0
  218. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 2, need: 0
  219. [ 0.000000] tegra2_periph_clk_init: check input: pll_a_out0, val: 3, need: 0
  220. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 0, need: 0
  221. [ 0.000000] tegra2_periph_clk_init: name: vi. input: pll_m
  222. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 0
  223. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 2, need: 0
  224. [ 0.000000] tegra2_periph_clk_init: check input: pll_a_out0, val: 3, need: 0
  225. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 0, need: 0
  226. [ 0.000000] tegra2_periph_clk_init: name: vi_sensor. input: pll_m
  227. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 0
  228. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 2, need: 0
  229. [ 0.000000] tegra2_periph_clk_init: check input: pll_a_out0, val: 3, need: 0
  230. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 0, need: 0
  231. [ 0.000000] tegra2_periph_clk_init: name: epp. input: pll_m
  232. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 0
  233. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 2, need: 0
  234. [ 0.000000] tegra2_periph_clk_init: check input: pll_a_out0, val: 3, need: 0
  235. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 0, need: 0
  236. [ 0.000000] tegra2_periph_clk_init: name: mpe. input: pll_m
  237. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 0
  238. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 2, need: 0
  239. [ 0.000000] tegra2_periph_clk_init: check input: pll_a_out0, val: 3, need: 0
  240. [ 0.000000] tegra2_periph_clk_init: check input: pll_m, val: 0, need: 2
  241. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 1, need: 2
  242. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 2, need: 2
  243. [ 0.000000] tegra2_periph_clk_init: name: host1x. input: pll_p
  244. [ 0.000000] tegra2_periph_clk_init: check input: pll_a_out0, val: 3, need: 2
  245. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  246. [ 0.000000] tegra2_periph_clk_init: check input: pll_d_out0, val: 1, need: 3
  247. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 2, need: 3
  248. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  249. [ 0.000000] tegra2_periph_clk_init: name: cve. input: clk_m
  250. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  251. [ 0.000000] tegra2_periph_clk_init: check input: pll_d_out0, val: 1, need: 3
  252. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 2, need: 3
  253. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  254. [ 0.000000] tegra2_periph_clk_init: name: tvo. input: clk_m
  255. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  256. [ 0.000000] tegra2_periph_clk_init: check input: pll_d_out0, val: 1, need: 3
  257. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 2, need: 3
  258. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  259. [ 0.000000] tegra2_periph_clk_init: name: hdmi. input: clk_m
  260. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  261. [ 0.000000] tegra2_periph_clk_init: check input: pll_d_out0, val: 1, need: 3
  262. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 2, need: 3
  263. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  264. [ 0.000000] tegra2_periph_clk_init: name: tvdac. input: clk_m
  265. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 0
  266. [ 0.000000] tegra2_periph_clk_init: name: disp1. input: pll_p
  267. [ 0.000000] tegra2_periph_clk_init: check input: pll_d_out0, val: 1, need: 0
  268. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 2, need: 0
  269. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 0
  270. [ 0.000000] tegra2_periph_clk_init: check input: pll_p, val: 0, need: 3
  271. [ 0.000000] tegra2_periph_clk_init: check input: pll_d_out0, val: 1, need: 3
  272. [ 0.000000] tegra2_periph_clk_init: check input: pll_c, val: 2, need: 3
  273. [ 0.000000] tegra2_periph_clk_init: check input: clk_m, val: 3, need: 3
  274. [ 0.000000] tegra2_periph_clk_init: name: disp2. input: clk_m
  275. [ 0.000000] Unable to set clock hclk to rate 120000000: -22
  276. [ 0.000000] Unable to set clock pclk to rate 60000000: -22
  277. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c09b3000 s8928 r8192 d15648 u32768
  278. [ 0.000000] pcpu-alloc: s8928 r8192 d15648 u32768 alloc=8*4096
  279. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  280. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
  281. [ 0.000000] Kernel command line: mem=448M@0M nvmem=64M@448M vmalloc=320M usbcore.old_scheme_first=1 tegraboot=sdmmc rootdelay=10 root=/dev/mmcblk1p3 console=tty0 tegrapart=recovery:300:a00:800,boot:d00:1000:800,mbr:1d00:200:800,system:1f00:25800:800,cache:27700:32000:800,misc:59700:400:800,userdata:59c00:9a600:800
  282. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  283. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  284. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  285. [ 0.000000] allocated 2293760 bytes of page_cgroup
  286. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  287. [ 0.000000] Memory: 448MB = 448MB total
  288. [ 0.000000] Memory: 446120k/446120k available, 12632k reserved, 0K highmem
  289. [ 0.000000] Virtual kernel memory layout:
  290. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  291. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  292. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  293. [ 0.000000] vmalloc : 0xdc800000 - 0xfe000000 ( 536 MB)
  294. [ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
  295. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  296. [ 0.000000] .init : 0xc0008000 - 0xc0037000 ( 188 kB)
  297. [ 0.000000] .text : 0xc0037000 - 0xc05648c0 (5303 kB)
  298. [ 0.000000] .data : 0xc0566000 - 0xc05b30a8 ( 309 kB)
  299. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  300. [ 0.000000] Preemptable hierarchical RCU implementation.
  301. [ 0.000000] RCU-based detection of stalled CPUs is disabled.
  302. [ 0.000000] Verbose stalled-CPUs detection is disabled.
  303. [ 0.000000] NR_IRQS:448
  304. [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  305. [ 0.000000] Console: colour dummy device 80x30
  306. [ 0.000000] console [tty0] enabled
  307. [ 0.003025] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
  308. [ 0.260050] pid_max: default: 32768 minimum: 301
  309. [ 0.260227] Security Framework initialized
  310. [ 0.260272] AppArmor: AppArmor initialized
  311. [ 0.260353] Mount-cache hash table entries: 512
  312. [ 0.260981] Initializing cgroup subsys ns
  313. [ 0.261004] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
  314. [ 0.261030] Initializing cgroup subsys cpuacct
  315. [ 0.261083] Initializing cgroup subsys memory
  316. [ 0.261124] Initializing cgroup subsys devices
  317. [ 0.261195] CPU: Testing write buffer coherency: ok
  318. [ 0.261350] Calibrating local timer... 249.94MHz, setting to 2.50MHz.
  319. [ 0.320084] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  320. [ 0.321171] CPU1: Booted secondary processor
  321. [ 0.322891] Brought up 2 CPUs
  322. [ 0.322917] SMP: Total of 2 processors activated (1005.77 BogoMIPS).
  323. [ 0.323332] devtmpfs: initialized
  324. [ 0.325994] print_constraints: dummy:
  325. [ 0.326223] NET: Registered protocol family 16
  326. [ 0.326924] host1x bus init
  327. [ 0.328373] Unable to set clock cdev1 to rate 26000000: -38
  328. [ 0.330545] EMC table: ramd_id: 1, tegra_sku_id 8
  329. [ 0.330659] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  330. [ 0.330689] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  331. [ 0.330723] hw-breakpoint: maximum watchpoint size is 4 bytes.
  332. [ 0.330918] tegra_iovmm_register: added iovmm-gart
  333. [ 0.339824] bio: create slab <bio-0> at 0
  334. [ 0.340383] vgaarb: loaded
  335. [ 0.340443] i2c-core: driver [tps6586x] using legacy suspend method
  336. [ 0.340473] i2c-core: driver [tps6586x] using legacy resume method
  337. [ 0.340728] SCSI subsystem initialized
  338. [ 0.340969] usbcore: registered new interface driver usbfs
  339. [ 0.341048] usbcore: registered new interface driver hub
  340. [ 0.341156] usbcore: registered new device driver usb
  341. [ 0.342206] tps6586x 4-0034: VERSIONCRC is 05
  342. [ 0.342422] tps6586x-regulator tps6586x-regulator.0: Probing reulator 0
  343. [ 0.343183] print_constraints: REG-SM_0: 725 <--> 1200 mV at 1275 mV fast normal
  344. [ 0.343369] tps6586x-regulator tps6586x-regulator.1: Probing reulator 1
  345. [ 0.344094] print_constraints: REG-SM_1: 725 <--> 1200 mV at 1100 mV fast normal
  346. [ 0.344277] tps6586x-regulator tps6586x-regulator.2: Probing reulator 2
  347. [ 0.345257] print_constraints: REG-SM_2: 3000 <--> 3700 mV at 3700 mV fast normal
  348. [ 0.345452] tps6586x-regulator tps6586x-regulator.3: Probing reulator 3
  349. [ 0.346054] print_constraints: REG-LDO_0: 1250 <--> 3300 mV at 1250 mV fast normal
  350. [ 0.346236] tps6586x-regulator tps6586x-regulator.4: Probing reulator 4
  351. [ 0.347221] print_constraints: REG-LDO_1: 725 <--> 1100 mV at 1100 mV fast normal
  352. [ 0.347407] tps6586x-regulator tps6586x-regulator.5: Probing reulator 5
  353. [ 0.347984] print_constraints: REG-LDO_2: 725 <--> 1200 mV at 1275 mV fast normal
  354. [ 0.348152] tps6586x-regulator tps6586x-regulator.6: Probing reulator 6
  355. [ 0.349003] print_constraints: REG-LDO_3: 1250 <--> 3300 mV at 3300 mV fast normal
  356. [ 0.349193] tps6586x-regulator tps6586x-regulator.7: Probing reulator 7
  357. [ 0.350183] print_constraints: REG-LDO_4: 1700 <--> 1800 mV at 1800 mV fast normal
  358. [ 0.350386] tps6586x-regulator tps6586x-regulator.8: Probing reulator 8
  359. [ 0.350813] print_constraints: REG-LDO_5: 1250 <--> 2850 mV at 2850 mV fast normal
  360. [ 0.351017] tps6586x-regulator tps6586x-regulator.9: Probing reulator 9
  361. [ 0.351591] print_constraints: REG-LDO_6: 1250 <--> 2850 mV at 2850 mV fast normal
  362. [ 0.351799] tps6586x-regulator tps6586x-regulator.10: Probing reulator 10
  363. [ 0.352377] print_constraints: REG-LDO_7: 1250 <--> 3300 mV at 3300 mV fast normal
  364. [ 0.352539] tps6586x-regulator tps6586x-regulator.11: Probing reulator 11
  365. [ 0.353129] print_constraints: REG-LDO_8: 1250 <--> 1800 mV at 1800 mV fast normal
  366. [ 0.353302] tps6586x-regulator tps6586x-regulator.12: Probing reulator 12
  367. [ 0.353722] print_constraints: REG-LDO_9: 1250 <--> 2850 mV at 2850 mV fast normal
  368. [ 0.354519] NetLabel: Initializing
  369. [ 0.354536] NetLabel: domain hash size = 128
  370. [ 0.354551] NetLabel: protocols = UNLABELED CIPSOv4
  371. [ 0.354604] NetLabel: unlabeled traffic allowed by default
  372. [ 0.355599] Switching to clocksource timer_us
  373. [ 0.355675] Switched to NOHz mode on CPU #0
  374. [ 0.355704] Switched to NOHz mode on CPU #1
  375. [ 0.363691] AppArmor: AppArmor Filesystem Enabled
  376. [ 0.364204] tegra-nvmap tegra-nvmap: created carveout iram (256KiB)
  377. [ 0.364339] tegra-nvmap tegra-nvmap: created carveout generic-0 (53248KiB)
  378. [ 0.373986] NET: Registered protocol family 2
  379. [ 0.374276] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  380. [ 0.375182] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  381. [ 0.375718] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
  382. [ 0.376008] TCP: Hash tables configured (established 16384 bind 16384)
  383. [ 0.376028] TCP reno registered
  384. [ 0.376045] UDP hash table entries: 256 (order: 1, 8192 bytes)
  385. [ 0.376077] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  386. [ 0.376481] NET: Registered protocol family 1
  387. [ 0.376522] PCI: CLS 0 bytes, default 32
  388. [ 0.376784] PMU: registered new PMU device of type 0
  389. [ 0.377498] audit: initializing netlink socket (disabled)
  390. [ 0.377543] type=2000 audit(8.896:1): initialized
  391. [ 0.447820] VFS: Disk quotas dquot_6.5.2
  392. [ 0.448176] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  393. [ 0.449864] msgmni has been set to 871
  394. [ 0.450851] io scheduler noop registered (default)
  395. [ 0.450872] io scheduler deadline registered
  396. [ 0.450949] io scheduler cfq registered
  397. [ 0.451262] >>> backlight_enable
  398. [ 0.451458] regulator avdd_lvds already enabled
  399. [ 0.452936] tegra_grhost tegra_grhost: initialized
  400. [ 0.453165] host1x: tegradc tegradc
  401. [ 0.465727] tegradc tegradc.0: probed
  402. [ 0.482614] Console: switching to colour frame buffer device 128x37
  403. [ 0.502130] tegradc tegradc.0: probed
  404. [ 0.502243] host1x: tegradc tegradc
  405. [ 0.502991] nvhdcp: using "always on" policy.
  406. [ 0.503458] tegradc tegradc.1: probed
  407. [ 0.503868] tegradc tegradc.1: probed
  408. [ 0.504445] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  409. [ 1.025861] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a XScale
  410. [ 1.185806] serial8250.0: ttyS1 at MMIO 0x70006300 (irq = 122) is a XScale
  411. [ 1.345817] Initialized tegra uart driver
  412. [ 1.350393] brd: module loaded
  413. [ 1.355037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  414. [ 1.360393] tegra2_cdev_clk_enable: name: cdev2,clk_reg: 0, num: 93, bit: 536870912, reg: 330
  415. [ 1.364493] tegra2_cdev_clk_enable: before = name: cdev2, reg 18: 5f00a0a, reg 330: 5f00a0a
  416. [ 1.368599] tegra2_cdev_clk_enable: after = name: cdev2, reg 18: 25f00a0a, reg 330: 25f00a0a
  417. [ 1.385784] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
  418. [ 1.389887] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
  419. [ 1.465689] tegra-ehci tegra-ehci.1: irq 53, io mem 0xc5004000
  420. [ 1.485663] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
  421. [ 1.489625] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  422. [ 1.493593] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  423. [ 1.497583] usb usb1: Product: Tegra EHCI Host Controller
  424. [ 1.501493] usb usb1: Manufacturer: Linux 2.6.38.3-stuw+ ehci_hcd
  425. [ 1.505452] usb usb1: SerialNumber: tegra-ehci.1
  426. [ 1.509790] hub 1-0:1.0: USB hub found
  427. [ 1.513671] hub 1-0:1.0: 1 port detected
  428. [ 1.520316] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
  429. [ 1.524228] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
  430. [ 1.625672] tegra-ehci tegra-ehci.2: irq 129, io mem 0xc5008000
  431. [ 1.735673] usb 1-1: new high speed USB device using tegra-ehci and address 2
  432. [ 1.755659] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
  433. [ 1.759759] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  434. [ 1.763910] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  435. [ 1.768136] usb usb2: Product: Tegra EHCI Host Controller
  436. [ 1.772345] usb usb2: Manufacturer: Linux 2.6.38.3-stuw+ ehci_hcd
  437. [ 1.776598] usb usb2: SerialNumber: tegra-ehci.2
  438. [ 1.780927] usb 1-1: New USB device found, idVendor=0424, idProduct=2512
  439. [ 1.785197] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  440. [ 1.789875] hub 2-0:1.0: USB hub found
  441. [ 1.794113] hub 2-0:1.0: 1 port detected
  442. [ 1.798790] hub 1-1:1.0: USB hub found
  443. [ 1.803318] Initializing USB Mass Storage driver...
  444. [ 1.807656] hub 1-1:1.0: 2 ports detected
  445. [ 1.811997] usbcore: registered new interface driver usb-storage
  446. [ 1.816434] USB Mass Storage support registered.
  447. [ 1.820879] usbcore: registered new interface driver libusual
  448. [ 1.825255] NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
  449. [ 1.835766] mousedev: PS/2 mouse device common for all mice
  450. [ 1.840680] tps6586x-rtc tps6586x-rtc.0: no IRQ specified, wakeup is disabled
  451. [ 1.915813] tps6586x-rtc tps6586x-rtc.0: rtc core: registered tps6586x-rtc as rtc0
  452. [ 1.920544] trpc_sema_init: registered misc dev 10:59
  453. [ 1.925081] trpc_node_register: Adding 'local' to node list
  454. [ 1.931815] trpc_node_register: Adding 'avp-remote' to node list
  455. [ 1.936490] tegra_avp_probe: driver registered, kernel 1f300000(dca00000), msg area 1ba7e000/1ba7e110
  456. [ 1.941444] cpuidle: using governor ladder
  457. [ 1.946166] cpuidle: using governor menu
  458. [ 1.950584] sdhci: Secure Digital Host Controller Interface driver
  459. [ 1.955072] sdhci: Copyright(c) Pierre Ossman
  460. [ 1.959596] mmc0: Invalid maximum block size, assuming 512 bytes
  461. [ 1.964182] Registered led device: mmc0::
  462. [ 1.964424] mmc0: SDHCI controller on platform [sdhci-tegra.3] using ADMA
  463. [ 1.969112] mmc1: Invalid maximum block size, assuming 512 bytes
  464. [ 1.973789] Registered led device: mmc1::
  465. [ 1.973934] mmc1: SDHCI controller on platform [sdhci-tegra.0] using ADMA
  466. [ 1.978783] Registered led device: wifi-led
  467. [ 1.979108] usbcore: registered new interface driver usbhid
  468. [ 1.983764] usbhid: USB HID core driver
  469. [ 1.997848] nvec nvec.2: ec firmware version 01.20.00 / f9
  470. [ 2.003881] input: NVEC keyboard as /devices/virtual/input/input0
  471. [ 2.009163] Registered led device: nvec-led
  472. [ 2.012454] oprofile: using arm/armv7-ca9
  473. [ 2.017078] usb 2-1: new high speed USB device using tegra-ehci and address 2
  474. [ 2.022990] TCP cubic registered
  475. [ 2.028433] NET: Registered protocol family 10
  476. [ 2.038428] NET: Registered protocol family 17
  477. [ 2.042984] Registering the dns_resolver key type
  478. [ 2.047552] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
  479. [ 2.052307] ThumbEE CPU extension supported.
  480. [ 2.056951] Registering SWP/SWPB emulation handler
  481. [ 2.061538] usb 2-1: New USB device found, idVendor=0424, idProduct=2513
  482. [ 2.066230] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  483. [ 2.076586] registered taskstats version 1
  484. [ 2.081535] hub 2-1:1.0: USB hub found
  485. [ 2.086369] hub 2-1:1.0: 3 ports detected
  486. [ 2.092030] tps6586x-rtc tps6586x-rtc.0: setting system clock to 2011-09-15 17:08:18 UTC (1316106498)
  487. [ 2.097027] Waiting 10sec before mounting root device...
  488. [ 2.140012] mmc0: new high speed MMC card at address 0001
  489. [ 2.145260] mmcblk0: mmc0:0001 MMC32G 29.8 GiB
  490. [ 2.151110] tegrapart_partition: state->bdev->bd_disk->disk_name = mmcblk0
  491. [ 2.155936] parse_tegrapart: tegrapart=recovery:300:a00:800,boot:d00:1000:800,mbr:1d00:200:800,system:1f00:25800:800,cache:27700:32000:800,misc:59700:400:800,userdata:59c00:9a600:800
  492. [ 2.165871] parse_tegrapart: part #1 [recover] start=26664 size=3072
  493. [ 2.170914] parse_tegrapart: part #2 [boot] start=26664 size=13312
  494. [ 2.175988] parse_tegrapart: mbr start=32
  495. [ 2.180843] tegra_msdos_parse: mbr_offset=29696
  496. [ 2.186370] tegra_msdos_parse: slot 1, start=2048 size=614400
  497. [ 2.191329] tegra_msdos_parse: put_partition
  498. [ 2.196272] tegra_msdos_parse: slot 2, start=616448 size=819200
  499. [ 2.201194] usb 1-1.1: new high speed USB device using tegra-ehci and address 3
  500. [ 2.206196] tegra_msdos_parse: put_partition
  501. [ 2.211168] tegra_msdos_parse: slot 3, start=1435648 size=4096
  502. [ 2.216049] tegra_msdos_parse: put_partition
  503. [ 2.220772] tegra_msdos_parse: slot 4, start=1439744 size=61043712
  504. [ 2.225518] tegra_msdos_parse: slot 4 extended partition
  505. [ 2.230250] <
  506. [ 2.230310] tegra_msdos_parse_extended: read part sector, start=29696+1439744 size=61043712
  507. [ 2.240637] tegra_msdos_parse_extended: put_partition 6 start=29696+1440768 size=2529280
  508. [ 2.245644] tegra_msdos_parse_extended: done with this sector
  509. [ 2.250393] tegra_msdos_parse_extended: extended part slot 2
  510. [ 2.255071] tegra_msdos_parse_extended: read part sector, start=29696+3970048 size=58513408
  511. [ 2.260846] tegra_msdos_parse_extended: put_partition 7 start=29696+3971072 size=58512384
  512. [ 2.265806] tegra_msdos_parse_extended: done with this sector
  513. [ 2.270654] tegra_msdos_parse_extended: done
  514. [ 2.275330] usb 1-1.1: New USB device found, idVendor=0db0, idProduct=3871
  515. [ 2.280051] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  516. [ 2.284756] usb 1-1.1: Product: 802.11 n WLAN
  517. [ 2.289396] >
  518. [ 2.293895] tegra_msdos_parse: done
  519. [ 2.298346] usb 1-1.1: Manufacturer: Ralink
  520. [ 2.302822] usb 1-1.1: SerialNumber: 1.0
  521. [ 2.307360] mmcblk0: p1 p2 p3 p4 p5 p6 p7
  522. [ 2.415833] usb 1-1.2: new full speed USB device using tegra-ehci and address 4
  523. [ 2.564195] usb 1-1.2: New USB device found, idVendor=0db0, idProduct=a871
  524. [ 2.568663] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  525. [ 2.655879] usb 2-1.1: new high speed USB device using tegra-ehci and address 3
  526. [ 2.669544] mmc1: new high speed SDHC card at address b368
  527. [ 2.674139] mmcblk1: mmc1:b368 SD32G 29.8 GiB
  528. [ 2.679530] mmcblk1: p1 p2 p3 p4
  529. [ 2.805974] usb 2-1.1: New USB device found, idVendor=0bdb, idProduct=190a
  530. [ 2.810132] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  531. [ 2.814311] usb 2-1.1: Product: F3307
  532. [ 2.818427] usb 2-1.1: Manufacturer: Û F3307
  533. [ 2.822533] usb 2-1.1: SerialNumber: 3526410400471310
  534. [ 2.925728] usb 2-1.2: new high speed USB device using tegra-ehci and address 4
  535. [ 3.001221] usb 2-1.2: New USB device found, idVendor=0bda, idProduct=58f2
  536. [ 3.005432] usb 2-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
  537. [ 3.009613] usb 2-1.2: Product: USB Camera
  538. [ 3.013736] usb 2-1.2: Manufacturer: XVA7Z4DX
  539. [ 3.017912] usb 2-1.2: SerialNumber: 200901010001
  540. [ 5.359818] input: ImPS/2 Logitech Wheel Mouse as /devices/serio0/input/input1
  541. [ 12.106559] EXT3-fs (mmcblk1p3): error: couldn't mount because of unsupported optional features (240)
  542. [ 16.646429] EXT2-fs (mmcblk1p3): error: couldn't mount because of unsupported optional features (240)
  543. [ 16.737841] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
  544. [ 16.742130] VFS: Mounted root (ext4 filesystem) readonly on device 179:19.
  545. [ 16.753795] devtmpfs: mounted
  546. [ 16.758110] Freeing init memory: 188K
  547. [ 18.485988] <30>udev[101]: starting version 167
  548. [ 19.377370] cdc_wdm 2-1.1:1.5: cdc-wdm0: USB WDM device
  549. [ 19.388355] cdc_wdm 2-1.1:1.8: cdc-wdm1: USB WDM device
  550. [ 19.388552] usbcore: registered new interface driver cdc_wdm
  551. [ 19.727426] cdc_acm 2-1.1:1.1: ttyACM0: USB ACM device
  552. [ 19.733983] cdc_acm 2-1.1:1.3: ttyACM1: USB ACM device
  553. [ 19.749846] cdc_acm 2-1.1:1.9: ttyACM2: USB ACM device
  554. [ 19.765000] usbcore: registered new interface driver cdc_acm
  555. [ 19.765014] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
  556. [ 19.772022] Linux video capture interface: v2.00
  557. [ 19.850516] type=1400 audit(1316106516.248:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=278 comm="apparmor_parser"
  558. [ 19.865345] Bluetooth: Core ver 2.15
  559. [ 19.866381] type=1400 audit(1316106516.268:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=278 comm="apparmor_parser"
  560. [ 19.866464] NET: Registered protocol family 31
  561. [ 19.866472] Bluetooth: HCI device and connection manager initialized
  562. [ 19.866484] Bluetooth: HCI socket layer initialized
  563. [ 19.867058] type=1400 audit(1316106516.268:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=278 comm="apparmor_parser"
  564. [ 19.872423] cdc_ether 2-1.1:1.6: wwan0: register 'cdc_ether' at usb-tegra-ehci.2-1.1, Mobile Broadband Network Device, 02:80:37:ec:02:00
  565. [ 19.872685] usbcore: registered new interface driver cdc_ether
  566. [ 19.947069] uvcvideo: Found UVC 1.00 device USB Camera (0bda:58f2)
  567. [ 19.949677] Bluetooth: Generic Bluetooth USB driver ver 0.6
  568. [ 19.976857] input: USB Camera as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.2/2-1.2:1.0/input/input2
  569. [ 19.977246] usbcore: registered new interface driver uvcvideo
  570. [ 19.977256] USB Video Class driver (v1.0.0)
  571. [ 19.980446] usbcore: registered new interface driver btusb
  572. [ 20.108321] usbcore: registered new interface driver zaurus
  573. [ 20.122695] cfg80211: Calling CRDA to update world regulatory domain
  574. [ 21.249178] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 3070, rf: 0005, rev: 0201.
  575. [ 21.249379] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
  576. [ 21.249394] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  577. [ 21.249406] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
  578. [ 21.249421] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  579. [ 21.249431] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
  580. [ 21.249443] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  581. [ 21.249453] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
  582. [ 21.249465] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  583. [ 21.249475] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
  584. [ 21.249489] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  585. [ 21.249500] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
  586. [ 21.249511] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  587. [ 21.249521] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
  588. [ 21.249533] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  589. [ 21.249543] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
  590. [ 21.249556] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  591. [ 21.249567] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
  592. [ 21.249578] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  593. [ 21.249588] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
  594. [ 21.249600] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  595. [ 21.249610] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
  596. [ 21.249626] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  597. [ 21.249646] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
  598. [ 21.249664] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
  599. [ 21.249684] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
  600. [ 21.249710] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
  601. [ 21.249726] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
  602. [ 21.249749] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm)
  603. [ 21.250216] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  604. [ 21.261234] Registered led device: rt2800usb-phy0::radio
  605. [ 21.261604] Registered led device: rt2800usb-phy0::assoc
  606. [ 21.261893] Registered led device: rt2800usb-phy0::quality
  607. [ 21.262674] usbcore: registered new interface driver rt2800usb
  608. [ 21.447334] <30>udev[119]: renamed network interface wlan0 to wlan1
  609. [ 21.900708] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null)
  610. [ 21.958101] tegra_asoc_utils_init: searching pll_a, pll_a_out0, cdev1...
  611. [ 21.980650] alc5632 0-001e: in i2c probe...
  612. [ 21.980859] alc5632 0-001e: got vid1: ec10
  613. [ 21.981278] alc5632 0-001e: got vid2: 55c
  614. [ 21.981407] alc5632 0-001e: Found codec: ALC5632 (ID: 5c)
  615. [ 21.991961] alc5632 0-001e: in codec probe ...
  616. [ 22.007730] snd_ctl_add, card - id: , shortname: , longname: driver:
  617. [ 22.007743] snd_ctl_add: add control Line Playback Volume
  618. [ 22.007754] snd_ctl_add, card - id: , shortname: , longname: driver:
  619. [ 22.007766] snd_ctl_add: add control Line Playback Switch
  620. [ 22.007777] snd_ctl_add, card - id: , shortname: , longname: driver:
  621. [ 22.007785] snd_ctl_add: add control Headphone Playback Volume
  622. [ 22.007797] snd_ctl_add, card - id: , shortname: , longname: driver:
  623. [ 22.007806] snd_ctl_add: add control Headphone Playback Switch
  624. [ 22.007817] snd_ctl_add, card - id: , shortname: , longname: driver:
  625. [ 22.007825] snd_ctl_add: add control Auxout Playback Volume
  626. [ 22.007835] snd_ctl_add, card - id: , shortname: , longname: driver:
  627. [ 22.007846] snd_ctl_add: add control Auxout Playback Switch
  628. [ 22.007857] snd_ctl_add, card - id: , shortname: , longname: driver:
  629. [ 22.007865] snd_ctl_add: add control Voice DAC Playback Volume
  630. [ 22.007875] snd_ctl_add, card - id: , shortname: , longname: driver:
  631. [ 22.007884] snd_ctl_add: add control Phone Capture Volume
  632. [ 22.007894] snd_ctl_add, card - id: , shortname: , longname: driver:
  633. [ 22.007903] snd_ctl_add: add control LineIn Capture Volume
  634. [ 22.007912] snd_ctl_add, card - id: , shortname: , longname: driver:
  635. [ 22.007921] snd_ctl_add: add control Stereo DAC Capture Volume
  636. [ 22.007933] snd_ctl_add, card - id: , shortname: , longname: driver:
  637. [ 22.007942] snd_ctl_add: add control Stereo DAC Capture Switch
  638. [ 22.007952] snd_ctl_add, card - id: , shortname: , longname: driver:
  639. [ 22.007961] snd_ctl_add: add control Mic1 Capture Volume
  640. [ 22.007971] snd_ctl_add, card - id: , shortname: , longname: driver:
  641. [ 22.007980] snd_ctl_add: add control Mic2 Capture Volume
  642. [ 22.007989] snd_ctl_add, card - id: , shortname: , longname: driver:
  643. [ 22.007998] snd_ctl_add: add control Rec Capture Volume
  644. [ 22.008010] snd_ctl_add, card - id: , shortname: , longname: driver:
  645. [ 22.008019] snd_ctl_add: add control Mic 1 Boost Volume
  646. [ 22.008029] snd_ctl_add, card - id: , shortname: , longname: driver:
  647. [ 22.008038] snd_ctl_add: add control Mic 2 Boost Volume
  648. [ 22.008048] snd_ctl_add, card - id: , shortname: , longname: driver:
  649. [ 22.008057] snd_ctl_add: add control Digital Boost Volume
  650. [ 22.008653] snd_ctl_add, card - id: , shortname: , longname: driver:
  651. [ 22.008667] snd_ctl_add: add control Int Spk Switch
  652. [ 22.008789] snd_ctl_add, card - id: , shortname: , longname: driver:
  653. [ 22.008801] snd_ctl_add: add control Right Capture Mix Mic1 Capture Switch
  654. [ 22.008814] snd_ctl_add, card - id: , shortname: , longname: driver:
  655. [ 22.008827] snd_ctl_add: add control Right Capture Mix Mic2 Capture Switch
  656. [ 22.008840] snd_ctl_add, card - id: , shortname: , longname: driver:
  657. [ 22.008850] snd_ctl_add: add control Right Capture Mix LineInR Capture Switch
  658. [ 22.008863] Control name 'Right Capture Mix Right Phone Capture Switch' truncated to 'Right Capture Mix Right Phone Capture Switc'
  659. [ 22.008875] snd_ctl_add, card - id: , shortname: , longname: driver:
  660. [ 22.008885] snd_ctl_add: add control Right Capture Mix Right Phone Capture Switc
  661. [ 22.008900] snd_ctl_add, card - id: , shortname: , longname: driver:
  662. [ 22.008910] snd_ctl_add: add control Right Capture Mix HPMixerR Capture Switch
  663. [ 22.008923] snd_ctl_add, card - id: , shortname: , longname: driver:
  664. [ 22.008933] snd_ctl_add: add control Right Capture Mix SPKMixer Capture Switch
  665. [ 22.008946] snd_ctl_add, card - id: , shortname: , longname: driver:
  666. [ 22.008956] snd_ctl_add: add control Right Capture Mix MonoMixer Capture Switch
  667. [ 22.008972] snd_ctl_add, card - id: , shortname: , longname: driver:
  668. [ 22.008982] snd_ctl_add: add control Left Capture Mix Mic1 Capture Switch
  669. [ 22.008994] snd_ctl_add, card - id: , shortname: , longname: driver:
  670. [ 22.009004] snd_ctl_add: add control Left Capture Mix Mic2 Capture Switch
  671. [ 22.009016] snd_ctl_add, card - id: , shortname: , longname: driver:
  672. [ 22.009026] snd_ctl_add: add control Left Capture Mix LineInL Capture Switch
  673. [ 22.009043] snd_ctl_add, card - id: , shortname: , longname: driver:
  674. [ 22.009053] snd_ctl_add: add control Left Capture Mix Left Phone Capture Switch
  675. [ 22.009066] snd_ctl_add, card - id: , shortname: , longname: driver:
  676. [ 22.009076] snd_ctl_add: add control Left Capture Mix HPMixerL Capture Switch
  677. [ 22.009089] snd_ctl_add, card - id: , shortname: , longname: driver:
  678. [ 22.009099] snd_ctl_add: add control Left Capture Mix SPKMixer Capture Switch
  679. [ 22.009114] snd_ctl_add, card - id: , shortname: , longname: driver:
  680. [ 22.009125] snd_ctl_add: add control Left Capture Mix MonoMixer Capture Switch
  681. [ 22.009139] snd_ctl_add, card - id: , shortname: , longname: driver:
  682. [ 22.009149] snd_ctl_add: add control Speaker Mix LI2SPK Playback Switch
  683. [ 22.009161] snd_ctl_add, card - id: , shortname: , longname: driver:
  684. [ 22.009171] snd_ctl_add: add control Speaker Mix PHONE2SPK Playback Switch
  685. [ 22.009185] snd_ctl_add, card - id: , shortname: , longname: driver:
  686. [ 22.009196] snd_ctl_add: add control Speaker Mix MIC12SPK Playback Switch
  687. [ 22.009208] snd_ctl_add, card - id: , shortname: , longname: driver:
  688. [ 22.009218] snd_ctl_add: add control Speaker Mix MIC22SPK Playback Switch
  689. [ 22.009232] snd_ctl_add, card - id: , shortname: , longname: driver:
  690. [ 22.009243] snd_ctl_add: add control Speaker Mix DAC2SPK Playback Switch
  691. [ 22.009779] snd_ctl_add, card - id: , shortname: , longname: driver:
  692. [ 22.009792] snd_ctl_add: add control Mono Mix ADC2MONO_L Playback Switch
  693. [ 22.009806] snd_ctl_add, card - id: , shortname: , longname: driver:
  694. [ 22.009816] snd_ctl_add: add control Mono Mix ADC2MONO_R Playback Switch
  695. [ 22.009832] snd_ctl_add, card - id: , shortname: , longname: driver:
  696. [ 22.009843] snd_ctl_add: add control Mono Mix LI2MONO Playback Switch
  697. [ 22.009855] snd_ctl_add, card - id: , shortname: , longname: driver:
  698. [ 22.009866] snd_ctl_add: add control Mono Mix MIC12MONO Playback Switch
  699. [ 22.009878] snd_ctl_add, card - id: , shortname: , longname: driver:
  700. [ 22.009891] snd_ctl_add: add control Mono Mix MIC22MONO Playback Switch
  701. [ 22.009903] snd_ctl_add, card - id: , shortname: , longname: driver:
  702. [ 22.009914] snd_ctl_add: add control Mono Mix DAC2MONO Playback Switch
  703. [ 22.009932] snd_ctl_add, card - id: , shortname: , longname: driver:
  704. [ 22.009943] snd_ctl_add: add control Mono Mix VOICE2MONO Playback Switch
  705. [ 22.009960] snd_ctl_add, card - id: , shortname: , longname: driver:
  706. [ 22.009971] snd_ctl_add: add control HPL Mix ADC2HP_L Playback Switch
  707. [ 22.009983] snd_ctl_add, card - id: , shortname: , longname: driver:
  708. [ 22.009994] snd_ctl_add: add control HPR Mix ADC2HP_R Playback Switch
  709. [ 22.010008] snd_ctl_add, card - id: , shortname: , longname: driver:
  710. [ 22.010021] snd_ctl_add: add control HP Mix LI2HP Playback Switch
  711. [ 22.010035] snd_ctl_add, card - id: , shortname: , longname: driver:
  712. [ 22.010046] snd_ctl_add: add control HP Mix PHONE2HP Playback Switch
  713. [ 22.010058] snd_ctl_add, card - id: , shortname: , longname: driver:
  714. [ 22.010069] snd_ctl_add: add control HP Mix MIC12HP Playback Switch
  715. [ 22.010083] snd_ctl_add, card - id: , shortname: , longname: driver:
  716. [ 22.010094] snd_ctl_add: add control HP Mix MIC22HP Playback Switch
  717. [ 22.010107] snd_ctl_add, card - id: , shortname: , longname: driver:
  718. [ 22.010118] snd_ctl_add: add control HP Mix DACL2HP Playback Switch
  719. [ 22.010130] snd_ctl_add, card - id: , shortname: , longname: driver:
  720. [ 22.010143] snd_ctl_add: add control HP Mix DACR2HP Playback Switch
  721. [ 22.010158] snd_ctl_add, card - id: , shortname: , longname: driver:
  722. [ 22.010169] snd_ctl_add: add control SpeakerOut N Mux
  723. [ 22.010182] snd_ctl_add, card - id: , shortname: , longname: driver:
  724. [ 22.010194] snd_ctl_add: add control Right Headphone Mux
  725. [ 22.010208] snd_ctl_add, card - id: , shortname: , longname: driver:
  726. [ 22.010219] snd_ctl_add: add control Left Headphone Mux
  727. [ 22.010232] snd_ctl_add, card - id: , shortname: , longname: driver:
  728. [ 22.010243] snd_ctl_add: add control SpeakerOut Mux
  729. [ 22.010255] snd_ctl_add, card - id: , shortname: , longname: driver:
  730. [ 22.010268] snd_ctl_add: add control AuxOut Mux
  731. [ 22.010859] spk event: 2
  732. [ 22.516742] asoc: alc5632-hifi <-> tegra-i2s.0 mapping ok
  733. [ 23.311548] device-mapper: uevent: version 1.0.3
  734. [ 23.314993] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
  735. [ 23.439173] type=1400 audit(1316106519.838:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=525 comm="apparmor_parser"
  736. [ 23.443156] type=1400 audit(1316106519.838:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=521 comm="apparmor_parser"
  737. [ 23.474493] type=1400 audit(1316106519.868:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=521 comm="apparmor_parser"
  738. [ 23.492771] type=1400 audit(1316106519.888:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=526 comm="apparmor_parser"
  739. [ 23.502164] type=1400 audit(1316106519.898:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=526 comm="apparmor_parser"
  740. [ 23.502910] type=1400 audit(1316106519.898:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser"
  741. [ 23.511031] phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'.
  742. [ 23.546133] phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.12.
  743. [ 23.573223] type=1400 audit(1316106519.968:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=534 comm="apparmor_parser"
  744. [ 24.258828] ieee80211 phy0: device now idle
  745. [ 24.296696] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
  746. [ 24.298072] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
  747. [ 24.299767] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
  748. [ 24.301565] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
  749. [ 24.303443] ADDRCONF(NETDEV_UP): wlan1: link is not ready
  750. [ 24.406024] Bluetooth: L2CAP ver 2.15
  751. [ 24.406035] Bluetooth: L2CAP socket layer initialized
  752. [ 24.447196] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  753. [ 24.447208] Bluetooth: BNEP filters: protocol multicast
  754. [ 24.493188] Bluetooth: SCO (Voice Link) ver 0.6
  755. [ 24.493202] Bluetooth: SCO socket layer initialized
  756. [ 24.592341] ieee80211 phy0: device no longer idle - scanning
  757. [ 26.801483] ieee80211 phy0: device now idle
  758. [ 32.106566] fuse init (API version 7.16)
  759. [ 44.527143] ieee80211 phy0: device no longer idle - scanning
  760. [ 53.303093] ieee80211 phy0: device now idle
  761. [ 72.025957] EXT4-fs (mmcblk1p3): re-mounted. Opts: commit=600
  762. [ 74.527405] ieee80211 phy0: device no longer idle - scanning
  763. [ 77.613073] ieee80211 phy0: device now idle
  764. [ 94.825728] wwan0: no IPv6 routers present
  765. [ 111.840428] paz00_asoc_hw_params: input srate: 8000
  766. [ 111.840476] paz00_asoc_hw_params: calculated mclk: 4096000
  767. [ 111.840532] paz00_asoc_hw_params: corrected mclk: 8192000
  768. [ 111.840574] tegra_asoc_utils_set_rate: set srate: 8000, mclk: 8192000
  769. [ 111.840615] tegra_asoc_utils_set_rate: new_baseclock: 73728000, rate: 8000
  770. [ 111.840663] tegra_asoc_utils_set_rate: pll_a=new_base=73728000, pll_a_out0=mclk=8192000
  771. [ 111.841381] tegra_i2s_set_fmt: I2S - BIT_FORMAT_I2S, LRCK_L_LOW
  772. [ 111.841441] alc5632_set_dai_sysclk: clk_id: 0, fgreq: 8192000 (Clocks after PP and dividers)
  773. [ 111.841492] alc5632_pcm_hw_params: SNDRV_PCM_FORMAT_S16_LE
  774. [ 111.841778] get_coeff: rate 8000
  775. [ 111.841819] asoc: can't set codec alc5632-hifi hw params - -22
  776. [ 114.523751] ieee80211 phy0: device no longer idle - scanning
  777. [ 116.069005] ieee80211 phy0: device now idle
  778. [ 118.174554] paz00_asoc_hw_params: input srate: 8000
  779. [ 118.174612] paz00_asoc_hw_params: calculated mclk: 4096000
  780. [ 118.174650] paz00_asoc_hw_params: corrected mclk: 8192000
  781. [ 118.174699] tegra_asoc_utils_set_rate: set srate: 8000, mclk: 8192000
  782. [ 118.174741] tegra_asoc_utils_set_rate: new_baseclock: 73728000, rate: 8000
  783. [ 118.175057] tegra_i2s_set_fmt: I2S - BIT_FORMAT_I2S, LRCK_L_LOW
  784. [ 118.175120] alc5632_pcm_hw_params: SNDRV_PCM_FORMAT_S16_LE
  785. [ 118.175413] get_coeff: rate 8000
  786. [ 118.175465] asoc: can't set codec alc5632-hifi hw params - -22
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!