API tools faq
paste
Guest User

Untitled

a guest
Mar 4th, 2014
161
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.35 KB | None | 0 0
raw download clone embed print report
  1. 3f5ba440
  2. ACPI: GSCI (v001 071913 GMCHSCI 0x20130719 MSFT 0x00000097) @ 0x3f5be0d0
  3. ACPI: DSDT (v001 PD2CL PD2CL001 0x00000001 INTL 0x20051117) @ 0x00000000
  4. ACPI: PM-Timer IO Port: 0x808
  5. ACPI: Local APIC address 0xfee00000
  6. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  7. Processor #0 7:12 APIC version 20
  8. ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  9. Processor #1 7:12 APIC version 20
  10. WARNING: NR_CPUS limit of 1 reached. Processor ignored.
  11. ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
  12. ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
  13. ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  14. IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  15. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  16. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  17. ACPI: IRQ0 used by override.
  18. ACPI: IRQ2 used by override.
  19. ACPI: IRQ9 used by override.
  20. Enabling APIC mode: Flat. Using 1 I/O APICs
  21. ACPI: HPET id: 0xffffffff base: 0xfed00000
  22. Using ACPI (MADT) for SMP configuration information
  23. Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
  24. Detected 1662.587 MHz processor.
  25. Built 1 zonelists. Total pages: 227584
  26. Kernel command line: root=/dev/sda3 reboot=b ide1=noprobe
  27. ide_setup: ide1=noprobe<6>pci_find_subsys() called while pci_devices is still empty
  28. pci_find_subsys() called while pci_devices is still empty
  29. pci_find_subsys() called while pci_devices is still empty
  30. pci_find_subsys() called while pci_devices is still empty
  31. pci_find_subsys() called while pci_devices is still empty
  32. pci_find_subsys() called while pci_devices is still empty
  33. pci_find_subsys() called while pci_devices is still empty
  34. pci_find_subsys() called while pci_devices is still empty
  35. pci_find_subsys() called while pci_devices is still empty
  36. pci_find_subsys() called while pci_devices is still empty
  37.  
  38. mapped APIC to ffffd000 (fee00000)
  39. mapped IOAPIC to ffffc000 (fec00000)
  40. Enabling fast FPU save and restore... done.
  41. Enabling unmasked SIMD FPU exception support... done.
  42. Initializing CPU#0
  43. PID hash table entries: 4096 (order: 12, 16384 bytes)
  44. Console: colour VGA+ 80x25
  45. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  46. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  47. Memory: 905052k/917504k available (2630k kernel code, 11976k reserved, 935k data, 216k init, 0k highmem)
  48. virtual kernel memory layout:
  49. fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB)
  50. vmalloc : 0xf8800000 - 0xfffb5000 ( 119 MB)
  51. lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
  52. .init : 0xc047e000 - 0xc04b4000 ( 216 kB)
  53. .data : 0xc0391bd8 - 0xc047b898 ( 935 kB)
  54. .text : 0xc0100000 - 0xc0391bd8 (2630 kB)
  55. Checking if this processor honours the WP bit even in supervisor mode... Ok.
  56. Using HPET for base-timer
  57. Calibrating delay using timer specific routine.. 3327.67 BogoMIPS (lpj=6655353)
  58. Mount-cache hash table entries: 512
  59. CPU: After generic identify, caps: bfe9fbff 20100000 00000000 00000000 0040e39d 00000000 00000001
  60. monitor/mwait feature present.
  61. using mwait in idle threads.
  62. CPU: L1 I cache: 32K, L1 D cache: 24K
  63. CPU: L2 cache: 512K
  64. CPU: After all inits, caps: bfe9fbff 20100000 00000000 00000940 0040e39d 00000000 00000001
  65. Intel machine check architecture supported.
  66. Intel machine check reporting enabled on CPU#0.
  67. Compat vDSO mapped to ffffe000.
  68. CPU: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a
  69. Checking 'hlt' instruction... OK.
  70. ACPI: Core revision 20060707
  71. ENABLING IO-APIC IRQs
  72. ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
  73. NET: Registered protocol family 16
  74. ACPI: bus type pci registered
  75. PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
  76. PCI: Not using MMCONFIG.
  77. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
  78. PCI: Using configuration type 1
  79. Setting up standard PCI resources
  80. ACPI: Interpreter enabled
  81. ACPI: Using IOAPIC for interrupt routing
  82. Error attaching device data
  83. Error attaching device data
  84. Error attaching device data
  85. Error attaching device data
  86. ACPI: PCI Root Bridge [PCI0] (0000:00)
  87. PCI: Probing PCI hardware (bus 00)
  88. Boot video device is 0000:00:02.0
  89. PCI: Transparent bridge - 0000:00:1e.0
  90. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  91. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  92. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
  93. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
  94. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
  95. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  96. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 *15)
  97. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15)
  98. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  99. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  100. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  101. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
  102. Linux Plug and Play Support v0.97 (c) Adam Belay
  103. SCSI subsystem initialized
  104. libata version 2.00 loaded.
  105. usbcore: registered new interface driver usbfs
  106. usbcore: registered new interface driver hub
  107. usbcore: registered new device driver usb
  108. PCI: Using ACPI for IRQ routing
  109. PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
  110. PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
  111. PCI: Bridge: 0000:00:1c.0
  112. IO window: disabled.
  113. MEM window: disabled.
  114. PREFETCH window: disabled.
  115. PCI: Bridge: 0000:00:1c.3
  116. IO window: e000-efff
  117. MEM window: disabled.
  118. PREFETCH window: fdf00000-fdffffff
  119. PCI: Bridge: 0000:00:1e.0
  120. IO window: disabled.
  121. MEM window: disabled.
  122. PREFETCH window: disabled.
  123. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
  124. PCI: Setting latency timer of device 0000:00:1c.0 to 64
  125. ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
  126. PCI: Setting latency timer of device 0000:00:1c.3 to 64
  127. PCI: Setting latency timer of device 0000:00:1e.0 to 64
  128. NET: Registered protocol family 2
  129. IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  130. TCP established hash table entries: 131072 (order: 7, 524288 bytes)
  131. TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
  132. TCP: Hash tables configured (established 131072 bind 65536)
  133. TCP reno registered
  134. Machine check exception polling timer started.
  135. apm: BIOS not found.
  136. audit: initializing netlink socket (disabled)
  137. audit(1393947379.460:1): initialized
  138. io scheduler noop registered
  139. io scheduler anticipatory registered
  140. io scheduler deadline registered
  141. io scheduler cfq registered (default)
  142. lp: driver loaded but no devices found
  143. ppdev: user-space parallel port driver
  144. Linux agpgart interface v0.101 (c) Dave Jones
  145. vesafb: Intel Corporation, Intel(r)PineView Graphics Controller, Hardware Version 0.0 (OEM: Intel(r)PineView Graphics Chip Accelerated VGA BIOS)
  146. vesafb: VBE version: 3.0
  147. vesafb: VBIOS/hardware supports DDC2 transfers
  148. vesafb: monitor limits: vf = 76 Hz, hf = 60 kHz, clk = 78 MHz
  149. vesafb: scrolling: redraw
  150. vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 6144k, total 8128k
  151. fb0: VESA VGA frame buffer device
  152. ACPI: Power Button (FF) [PWRF]
  153. ACPI: Power Button (CM) [PWRB]
  154. isapnp: Scanning for PnP cards...
  155. isapnp: No Plug & Play device found
  156. Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ sharing enabled
  157. serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  158. serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  159. parport0: PC-style at 0x378 [PCSPP(,...)]
  160. lp0: using parport0 (polling).
  161. RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
  162. loop: loaded (max 8 devices)
  163. Intel(R) PRO/1000 Network Driver - version 7.2.9-k4-NAPI
  164. Copyright (c) 1999-2006 Intel Corporation.
  165. pcnet32.c:v1.33 27.Jun.2006 [email protected]
  166. e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
  167. e100: Copyright(c) 1999-2006 Intel Corporation
  168. PPP generic driver version 2.4.2
  169. PPP Deflate Compression module registered
  170. PPP BSD Compression module registered
  171. NET: Registered protocol family 24
  172. r8169 Gigabit Ethernet driver 2.2LK loaded
  173. ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 17
  174. PCI: Setting latency timer of device 0000:02:00.0 to 64
  175. eth0: RTL8169s/8110s at 0xf881e000, 00:e0:b4:08:0b:34, IRQ 17
  176. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  177. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  178. Probing IDE interface ide0...
  179. Probing IDE interface ide2...
  180. Probing IDE interface ide3...
  181. Probing IDE interface ide4...
  182. Probing IDE interface ide5...
  183. ata_piix 0000:00:1f.2: version 2.00ac6
  184. ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
  185. ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
  186. PCI: Setting latency timer of device 0000:00:1f.2 to 64
  187. ata1: SATA max UDMA/133 cmd 0xC800 ctl 0xD082 bmdma 0xC880 irq 17
  188. ata2: SATA max UDMA/133 cmd 0xD000 ctl 0xCC02 bmdma 0xC888 irq 17
  189. scsi0 : ata_piix
  190. ATA: abnormal status 0x7F on port 0xC807
  191. scsi1 : ata_piix
  192. ata2.00: ATA-9, max UDMA/100, 62533296 sectors: LBA48 NCQ (depth 0/32)
  193. ata2.00: ata2: dev 0 multi count 16
  194. ata2.00: configured for UDMA/100
  195. scsi 1:0:0:0: Direct-Access ATA C3000.6-M032 SVN2 PQ: 0 ANSI: 5
  196. SCSI device sda: 62533296 512-byte hdwr sectors (32017 MB)
  197. sda: Write Protect is off
  198. sda: Mode Sense: 00 3a 00 00
  199. SCSI device sda: drive cache: write back
  200. SCSI device sda: 62533296 512-byte hdwr sectors (32017 MB)
  201. sda: Write Protect is off
  202. sda: Mode Sense: 00 3a 00 00
  203. SCSI device sda: drive cache: write back
  204. sda: sda1 sda2 sda3
  205. sd 1:0:0:0: Attached scsi disk sda
  206. sd 1:0:0:0: Attached scsi generic sg0 type 0
  207. usbmon: debugfs is not available
  208. ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
  209. PCI: Setting latency timer of device 0000:00:1d.7 to 64
  210. ehci_hcd 0000:00:1d.7: EHCI Host Controller
  211. ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  212. ehci_hcd 0000:00:1d.7: debug port 1
  213. PCI: cache line size of 32 is not supported by device 0000:00:1d.7
  214. ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfebf3c00
  215. ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  216. usb usb1: configuration #1 chosen from 1 choice
  217. hub 1-0:1.0: USB hub found
  218. hub 1-0:1.0: 8 ports detected
  219. ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
  220. USB Universal Host Controller Interface driver v3.0
  221. ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
  222. PCI: Setting latency timer of device 0000:00:1d.0 to 64
  223. uhci_hcd 0000:00:1d.0: UHCI Host Controller
  224. uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  225. uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000d880
  226. usb usb2: configuration #1 chosen from 1 choice
  227. hub 2-0:1.0: USB hub found
  228. hub 2-0:1.0: 2 ports detected
  229. ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
  230. PCI: Setting latency timer of device 0000:00:1d.1 to 64
  231. uhci_hcd 0000:00:1d.1: UHCI Host Controller
  232. uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  233. uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d800
  234. usb usb3: configuration #1 chosen from 1 choice
  235. hub 3-0:1.0: USB hub found
  236. hub 3-0:1.0: 2 ports detected
  237. ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
  238. PCI: Setting latency timer of device 0000:00:1d.2 to 64
  239. uhci_hcd 0000:00:1d.2: UHCI Host Controller
  240. uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  241. uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000d480
  242. usb usb4: configuration #1 chosen from 1 choice
  243. hub 4-0:1.0: USB hub found
  244. hub 4-0:1.0: 2 ports detected
  245. ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
  246. PCI: Setting latency timer of device 0000:00:1d.3 to 64
  247. uhci_hcd 0000:00:1d.3: UHCI Host Controller
  248. uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  249. uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
  250. usb usb5: configuration #1 chosen from 1 choice
  251. hub 5-0:1.0: USB hub found
  252. hub 5-0:1.0: 2 ports detected
  253. usb 3-2: new low speed USB device using uhci_hcd and address 2
  254. usb 3-2: configuration #1 chosen from 1 choice
  255. usb 4-2: new low speed USB device using uhci_hcd and address 2
  256. usb 4-2: configuration #1 chosen from 1 choice
  257. usbcore: registered new interface driver usblp
  258. /usr/src/linux-2.6.19-gentoo-r5/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
  259. Initializing USB Mass Storage driver...
  260. usbcore: registered new interface driver usb-storage
  261. USB Mass Storage support registered.
  262. usbcore: registered new interface driver usblcd
  263. usbcore: registered new interface driver ldusb
  264. usbcore: registered new interface driver usbled
  265. PNP: No PS/2 controller found. Probing ports directly.
  266. serio: i8042 KBD port at 0x60,0x64 irq 1
  267. serio: i8042 AUX port at 0x60,0x64 irq 12
  268. mice: PS/2 mouse device common for all mice
  269. TCP cubic registered
  270. NET: Registered protocol family 1
  271. NET: Registered protocol family 17
  272. Using IPI Shortcut mode
  273. ACPI: (supports S0 S1 S4 S5)
  274. Time: tsc clocksource has been installed.
  275. input: AT Translated Set 2 keyboard as /class/input/input0
  276. kjournald starting. Commit interval 5 seconds
  277. EXT3-fs: mounted filesystem with ordered data mode.
  278. VFS: Mounted root (ext3 filesystem) readonly.
  279. Freeing unused kernel memory: 216k freed
  280. usbcore: registered new interface driver TouchKit
  281. EXT3 FS on sda3, internal journal
  282. Adding 1028152k swap on /dev/sda2. Priority:-1 extents:1 across:1028152k
  283. r8169: eth0: link up
  284. r8169: eth0: link up
  285. [vspm] init_module: start
  286. [vspm] init_module: registering devices
  287. [vspm] init_module: dev #0 MJ 100 (vsps0)
  288. [vspm] init_module: dev #0 MJ 101 (vsps0)
  289. [vspm] init_module: dev #1 MJ 100 (vsps1)
  290. [vspm] init_module: dev #1 MJ 101 (vsps1)
  291. [vspm] init_module: dev #2 MJ 100 (vsps2)
  292. [vspm] init_module: dev #2 MJ 101 (vsps2)
  293. [vspm] init_module: dev #3 MJ 100 (vsps3)
  294. [vspm] init_module: dev #3 MJ 101 (vsps3)
  295. [vspm] init_module: dev #4 MJ 100 (vsps4)
  296. [vspm] init_module: dev #4 MJ 101 (vsps4)
  297. [vspm] 5 devices created in /dev/vsp* with MJs [100;101]
  298. [vspm] init_module: end
  299. mtrr: no more MTRRs available
  300. mtrr: no more MTRRs available
  301. mtrr: no more MTRRs available
  302. [vspm] vsp_open vspd0 by (5368)vspd ret:0
  303. hub 4-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
  304. usb 4-2: USB disconnect, address 2
  305. usb 4-2: new low speed USB device using uhci_hcd and address 3
  306. usb 4-2: configuration #1 chosen from 1 choice
  307. usb 1-8: new high speed USB device using ehci_hcd and address 4
  308. usb 1-8: configuration #1 chosen from 1 choice
  309. scsi2 : SCSI emulation for USB Mass Storage devices
  310. usb-storage: device found at 4
  311. usb-storage: waiting for device to settle before scanning
  312. scsi 2:0:0:0: Direct-Access pqi IntelligentStick 1.00 PQ: 0 ANSI: 2
  313. SCSI device sdb: 2023424 512-byte hdwr sectors (1036 MB)
  314. sdb: Write Protect is off
  315. sdb: Mode Sense: 23 00 00 00
  316. sdb: assuming drive cache: write through
  317. SCSI device sdb: 2023424 512-byte hdwr sectors (1036 MB)
  318. sdb: Write Protect is off
  319. sdb: Mode Sense: 23 00 00 00
  320. sdb: assuming drive cache: write through
  321. sdb: sdb1
  322. sd 2:0:0:0: Attached scsi removable disk sdb
  323. sd 2:0:0:0: Attached scsi generic sg1 type 0
  324. usb-storage: device scan complete
  325. kobject_add failed for r8169 with -EEXIST, don't try to register things with the same name in the same directory.
  326. [<c0219d81>] kobject_add+0x189/0x1b3
  327. [<c0219ea9>] kobject_register+0x22/0x3f
  328. [<c0282e06>] bus_add_driver+0x54/0x18d
  329. [<c02838ce>] driver_register+0x80/0x8d
  330. [<c0228443>] __pci_register_driver+0x62/0x85
  331. [<f8822017>] rtl8169_init_module+0x17/0x1a [r8169]
  332. [<c0132aa6>] sys_init_module+0x146c/0x1623
  333. [<c0102ddd>] sysenter_past_esp+0x56/0x79
  334. =======================
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!