dmesg

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-16-pve (root@maui) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Mon Oct 22 08:38:13 CEST 2012
Command line: BOOT_IMAGE=/vmlinuz-2.6.32-16-pve root=/dev/mapper/pve-root ro quiet
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007f89b000 (usable)
 BIOS-e820: 000000007f89b000 - 000000007f912000 (reserved)
 BIOS-e820: 000000007f912000 - 000000007f943000 (usable)
 BIOS-e820: 000000007f943000 - 000000007f977000 (reserved)
 BIOS-e820: 000000007f977000 - 000000007f9f8000 (ACPI NVS)
 BIOS-e820: 000000007f9f8000 - 000000007fa12000 (reserved)
 BIOS-e820: 000000007fa12000 - 000000007fa6b000 (usable)
 BIOS-e820: 000000007fa6b000 - 000000007fa92000 (reserved)
 BIOS-e820: 000000007fa92000 - 000000007fb06000 (usable)
 BIOS-e820: 000000007fb06000 - 000000007fb12000 (ACPI NVS)
 BIOS-e820: 000000007fb12000 - 000000007fb20000 (usable)
 BIOS-e820: 000000007fb20000 - 000000007fb32000 (ACPI data)
 BIOS-e820: 000000007fb32000 - 000000007fb33000 (reserved)
 BIOS-e820: 000000007fb33000 - 000000007fb7a000 (usable)
 BIOS-e820: 000000007fb7a000 - 000000007fbfa000 (reserved)
 BIOS-e820: 000000007fbfa000 - 000000007fc00000 (usable)
 BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fffa0000 - 00000000fffac000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000280000000 (usable)
DMI 2.3 present.
SMBIOS version 2.3 @ 0xFDBE0
DMI: Intel MP Server ........../Main Board, BIOS SHW40.86B.P.12.00.0076.021520071719 02/15/2007
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x280000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 0080000000 mask FF80000000 uncachable
  1 base 007FC00000 mask FFFFC00000 uncachable
  2 base 4000000000 mask C000000000 uncachable
  3 base 8000000000 mask 8000000000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0x7fc00 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007fc00000
 0000000000 - 007fc00000 page 2M
kernel direct mapping tables up to 7fc00000 @ 8000-b000
init_memory_mapping: 0000000100000000-0000000280000000
 0100000000 - 0280000000 page 2M
kernel direct mapping tables up to 280000000 @ 9000-14000
RAMDISK: 3707b000 - 37fefe98
ACPI: RSDP 00000000000f03d0 00024 (v02 INTEL )
ACPI: XSDT 000000007fb31f30 0004C (v01 INTEL  SHW40M   00000002 MSFT 01000013)
ACPI: FACP 000000007fb2fd90 000F4 (v03 INTEL  SHW40M   00000002      00000000)
ACPI: DSDT 000000007fb21010 0DCA4 (v01 INTEL  SHW40M   00000002 INTL 20030918)
ACPI: FACS 000000007fb11c40 00040
ACPI: APIC 000000007fb2fc10 0015C (v01 INTEL  SHW40M   00000002      00000000)
ACPI: SRAT 000000007fb20f90 00058 (v01 INTEL  SHW40M   00000002      00000000)
ACPI: MCFG 000000007fb20f10 0003C (v01 INTEL  SHW40M   00000002      00000000)
ACPI: SPCR 000000007fb20e90 00050 (v01 INTEL  SHW40M   00000002      00000000)
ACPI: Local APIC address 0xfee00000
SRAT: Node 0 PXM 0 100000000-1000000000
SRAT: Hotplug area 1048576 -> 16777216 has existing memory
No NUMA configuration found
Faking a node at 0000000000000000-0000000280000000
Bootmem setup node 0 0000000000000000-0000000280000000
  NODE_DATA [000000000000f000 - 0000000000043fff]
  bootmap [0000000000044000 -  0000000000093fff] pages 50
(8 early reservations) ==> bootmem [0000000000 - 0280000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 000242af84]    TEXT DATA BSS ==> [0001000000 - 000242af84]
  #3 [003707b000 - 0037fefe98]          RAMDISK ==> [003707b000 - 0037fefe98]
  #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
  #5 [000242b000 - 000242b225]              BRK ==> [000242b000 - 000242b225]
  #6 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
  #7 [0000009000 - 000000f000]          PGTABLE ==> [0000009000 - 000000f000]
found SMP MP-table at [ffff8800000fd7c0] fd7c0
 [ffffea0000000000-ffffea0009ffffff] PMD -> [ffff880028600000-ffff8800305fffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00280000
Movable zone start PFN for each node
early_node_map[9] active PFN ranges
    0: 0x00000001 -> 0x0000009f
    0: 0x00000100 -> 0x0007f89b
    0: 0x0007f912 -> 0x0007f943
    0: 0x0007fa12 -> 0x0007fa6b
    0: 0x0007fa92 -> 0x0007fb06
    0: 0x0007fb12 -> 0x0007fb20
    0: 0x0007fb33 -> 0x0007fb7a
    0: 0x0007fbfa -> 0x0007fc00
    0: 0x00100000 -> 0x00280000
On node 0 totalpages: 2095506
  DMA zone: 64 pages used for memmap
  DMA zone: 107 pages reserved
  DMA zone: 3827 pages, LIFO batch:0
  DMA32 zone: 16320 pages used for memmap
  DMA32 zone: 502324 pages, LIFO batch:31
  Normal zone: 24576 pages used for memmap
  Normal zone: 1548288 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0f] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec85000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec85000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec85800] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec85800, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec86000] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec86000, GSI 72-95
ACPI: IOAPIC (id[0x0c] address[0xfec86800] gsi_base[96])
IOAPIC[4]: apic_id 12, version 32, address 0xfec86800, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 16 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 120
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 000000007f89b000 - 000000007f912000
PM: Registered nosave memory: 000000007f943000 - 000000007f977000
PM: Registered nosave memory: 000000007f977000 - 000000007f9f8000
PM: Registered nosave memory: 000000007f9f8000 - 000000007fa12000
PM: Registered nosave memory: 000000007fa6b000 - 000000007fa92000
PM: Registered nosave memory: 000000007fb06000 - 000000007fb12000
PM: Registered nosave memory: 000000007fb20000 - 000000007fb32000
PM: Registered nosave memory: 000000007fb32000 - 000000007fb33000
PM: Registered nosave memory: 000000007fb7a000 - 000000007fbfa000
PM: Registered nosave memory: 000000007fc00000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 0000000090000000
PM: Registered nosave memory: 0000000090000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000fffa0000
PM: Registered nosave memory: 00000000fffa0000 - 00000000fffac000
PM: Registered nosave memory: 00000000fffac000 - 0000000100000000
Allocating PCI resources starting at 90000000 (gap: 90000000:6ec00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 39 pages/cpu @ffff880030600000 s128024 r8192 d23528 u262144
pcpu-alloc: s128024 r8192 d23528 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2054439
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-16-pve root=/dev/mapper/pve-root ro quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
PRAM: banned regions:
   0: [00000000 - 0000242b] 9260 pages
   1: [00020000 - 00028403] 33796 pages
   2: [00028600 - 000309ff] 33792 pages
   3: [0003707b - 00037fef] 3957 pages
Total banned: 80805 pages in 4 regions
Memory: 8145392k/10485760k available (5317k kernel code, 2103736k absent, 236632k reserved, 7017k data, 1316k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:2168
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2593.436 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5186.87 BogoMIPS (lpj=2593436)
pid_max: default: 1048576 minimum: 301
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21356 entries in 84 pages
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(TM) CPU 2.60GHz stepping 08
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version:                0
... bit width:              40
... generic registers:      18
... value mask:             000000ffffffffff
... max period:             0000007fffffffff
... fixed-purpose events:   0
... event mask:             000000000003ffff
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 Ok.
Brought up 16 CPUs
Total of 16 processors activated (82980.11 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=64 bytes
sizeof(inode)=664 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=872 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=264 bytes
sizeof(task_struct)=2744 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at 7f977000 (528384 bytes)
PM: Registering ACPI NVS region at 7fb06000 (49152 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: MCFG area at 80000000 reserved in E820
PCI: Using MMCONFIG at 80000000 - 8fffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x10, I/O: command/status = 0xca7, data = 0xca6
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [TNB] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0x8fffffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x90000000-0xfdffffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xfec00000-0xfecfffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xfed00000-0xfedfffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xffe00000-0xffffffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xfff0000000-0xffffffffff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0x8060-0x807f]
pci 0000:00:1d.1: reg 20: [io  0x8040-0x805f]
pci 0000:00:1d.2: reg 20: [io  0x8020-0x803f]
pci 0000:00:1d.7: reg 10: [mem 0xb6600000-0xb66003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH4 GPIO
pci 0000:00:1f.2: reg 10: [io  0x8098-0x809f]
pci 0000:00:1f.2: reg 14: [io  0x80a4-0x80a7]
pci 0000:00:1f.2: reg 18: [io  0x8090-0x8097]
pci 0000:00:1f.2: reg 1c: [io  0x80a0-0x80a3]
pci 0000:00:1f.2: reg 20: [io  0x8080-0x808f]
pci 0000:00:1f.3: reg 20: [io  0x8000-0x801f]
pci 0000:00:01.0: PCI bridge to [bus 01-02]
pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
pci 0000:00:01.0:   bridge window [mem 0xb4600000-0xb65fffff]
pci 0000:00:01.0:   bridge window [mem 0x98000000-0x9bffffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 03-04]
pci 0000:00:02.0:   bridge window [io  0x6000-0x6fff]
pci 0000:00:02.0:   bridge window [mem 0xb2600000-0xb45fffff]
pci 0000:00:02.0:   bridge window [mem 0x9c000000-0x9fffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 05-05]
pci 0000:00:03.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:04.0: PCI bridge to [bus 06-07]
pci 0000:00:04.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:04.0:   bridge window [mem 0xb0600000-0xb25fffff]
pci 0000:00:04.0:   bridge window [mem 0xa0000000-0xa3ffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 08-09]
pci 0000:00:05.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:05.0:   bridge window [mem 0xae600000-0xb05fffff]
pci 0000:00:05.0:   bridge window [mem 0xa4000000-0xa7ffffff 64bit pref]
pci 0000:0a:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:0a:00.0: reg 10: [mem 0xae500000-0xae500fff 64bit]
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:00.0: PME# disabled
pci 0000:0a:00.2: PXH quirk detected; SHPC device MSI disabled
pci 0000:0a:00.2: PME# supported from D0 D3hot D3cold
pci 0000:0a:00.2: PME# disabled
pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:06.0: PCI bridge to [bus 0a-0d]
pci 0000:00:06.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:06.0:   bridge window [mem 0xac400000-0xae5fffff]
pci 0000:00:06.0:   bridge window [mem 0xa8000000-0xabffffff 64bit pref]
pci 0000:0b:02.0: reg 10: [io  0x3000-0x30ff]
pci 0000:0b:02.0: reg 14: [mem 0xac500000-0xac50ffff 64bit]
pci 0000:0b:02.0: reg 1c: [mem 0xac510000-0xac51ffff 64bit]
pci 0000:0b:02.0: reg 30: [mem 0xfff00000-0xffffffff pref]
pci 0000:0b:02.0: supports D1 D2
pci 0000:0a:00.0: PCI bridge to [bus 0b-0b]
pci 0000:0a:00.0:   bridge window [io  0x3000-0x3fff]
pci 0000:0a:00.0:   bridge window [mem 0xac500000-0xae4fffff]
pci 0000:0a:00.0:   bridge window [mem 0xa8000000-0xabffffff 64bit pref]
pci 0000:0c:02.0: reg 10: [mem 0xac400000-0xac40ffff 64bit]
pci 0000:0c:02.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:0c:02.0: PME# supported from D3hot D3cold
pci 0000:0c:02.0: PME# disabled
pci 0000:0c:02.1: reg 10: [mem 0xac410000-0xac41ffff 64bit]
pci 0000:0c:02.1: PME# supported from D3hot D3cold
pci 0000:0c:02.1: PME# disabled
pci 0000:0a:00.2: PCI bridge to [bus 0c-0c]
pci 0000:0a:00.2:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:0a:00.2:   bridge window [mem 0xac400000-0xac4fffff]
pci 0000:0a:00.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0e:00.0: PME# disabled
pci 0000:0e:00.2: PME# supported from D0 D3hot D3cold
pci 0000:0e:00.2: PME# disabled
pci 0000:0e:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:07.0: PCI bridge to [bus 0e-10]
pci 0000:00:07.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:07.0:   bridge window [mem 0xac200000-0xac3fffff]
pci 0000:00:07.0:   bridge window [mem 0xac000000-0xac0fffff 64bit pref]
pci 0000:0f:0e.0: reg 10: [mem 0xac000000-0xac00ffff pref]
pci 0000:0f:0e.0: reg 18: [mem 0xac200000-0xac23ffff]
pci 0000:0f:0e.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:0f:0e.0: supports D1
pci 0000:0e:00.0: PCI bridge to [bus 0f-0f]
pci 0000:0e:00.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:0e:00.0:   bridge window [mem 0xac200000-0xac2fffff]
pci 0000:0e:00.0:   bridge window [mem 0xac000000-0xac0fffff 64bit pref]
pci 0000:0e:00.2: PCI bridge to [bus 10-10]
pci 0000:0e:00.2:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:0e:00.2:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:0e:00.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:11:00.0: reg 10: [mem 0x90000000-0x97ffffff pref]
pci 0000:11:00.0: reg 14: [io  0x2000-0x20ff]
pci 0000:11:00.0: reg 18: [mem 0xac100000-0xac10ffff]
pci 0000:11:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:11:00.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1e.0:   bridge window [mem 0xac100000-0xac1fffff]
pci 0000:00:1e.0:   bridge window [mem 0x90000000-0x97ffffff pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.ICHB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI6.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI6.PXHB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI7.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI7.PXHB._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 9 10 11 12)
vgaarb: device added: PCI:0000:11:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:11:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 128 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [mem 0x000a0000-0x000bffff]
pnp 00:00: [mem 0x80000000-0x8fffffff]
pnp 00:00: [mem 0x90000000-0xfdffffff]
pnp 00:00: [mem 0xfec00000-0xfecfffff]
pnp 00:00: [mem 0xfed00000-0xfedfffff]
pnp 00:00: [mem 0xffc00000-0xffdfffff]
pnp 00:00: [mem 0xffe00000-0xffffffff]
pnp 00:00: [mem 0xfff0000000-0xffffffffff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io  0x0000-0x001f]
pnp 00:01: [io  0x0080-0x0091]
pnp 00:01: [io  0x0093-0x009f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io  0x0070-0x0077]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io  0x00f0]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io  0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [mem 0xffe00000-0xffffffff]
pnp 00:05: [mem 0xffc00000-0xffdfffff]
pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:06: [io  0x0400-0x04bf]
pnp 00:06: [io  0x0092]
pnp 00:06: [io  0x0800-0x087f]
pnp 00:06: [io  0x03f0-0x03f5]
pnp 00:06: [io  0x03f7]
pnp 00:06: [io  0x0880-0x0883]
pnp 00:06: [io  0x0ca4]
pnp 00:06: [io  0x0ca5]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io  0x03f8-0x03ff]
pnp 00:07: [irq 4]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [io  0x02f8-0x02ff]
pnp 00:08: [irq 3]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io  0x0060]
pnp 00:09: [io  0x0064]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io  0x0ca2]
pnp 00:0a: [io  0x0ca3]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:06: [io  0x0400-0x04bf] could not be reserved
system 00:06: [io  0x0800-0x087f] has been reserved
system 00:06: [io  0x03f0-0x03f5] has been reserved
system 00:06: [io  0x03f7] has been reserved
system 00:06: [io  0x0880-0x0883] has been reserved
system 00:06: [io  0x0ca4] has been reserved
system 00:06: [io  0x0ca5] has been reserved
system 00:0a: [io  0x0ca2] has been reserved
system 00:0a: [io  0x0ca3] has been reserved
pci 0000:0b:02.0: no compatible bridge window for [mem 0xfff00000-0xffffffff pref]
pci 0000:0c:02.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:0f:0e.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:01.0: PCI bridge to [bus 01-02]
pci 0000:00:01.0: PCI bridge to [bus 01-02]
pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
pci 0000:00:01.0:   bridge window [mem 0xb4600000-0xb65fffff]
pci 0000:00:01.0:   bridge window [mem 0x98000000-0x9bffffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 03-04]
pci 0000:00:02.0: PCI bridge to [bus 03-04]
pci 0000:00:02.0:   bridge window [io  0x6000-0x6fff]
pci 0000:00:02.0:   bridge window [mem 0xb2600000-0xb45fffff]
pci 0000:00:02.0:   bridge window [mem 0x9c000000-0x9fffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 05-05]
pci 0000:00:03.0: PCI bridge to [bus 05-05]
pci 0000:00:03.0:   bridge window [io  disabled]
pci 0000:00:03.0:   bridge window [mem disabled]
pci 0000:00:03.0:   bridge window [mem pref disabled]
pci 0000:00:04.0: PCI bridge to [bus 06-07]
pci 0000:00:04.0: PCI bridge to [bus 06-07]
pci 0000:00:04.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:04.0:   bridge window [mem 0xb0600000-0xb25fffff]
pci 0000:00:04.0:   bridge window [mem 0xa0000000-0xa3ffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 08-09]
pci 0000:00:05.0: PCI bridge to [bus 08-09]
pci 0000:00:05.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:05.0:   bridge window [mem 0xae600000-0xb05fffff]
pci 0000:00:05.0:   bridge window [mem 0xa4000000-0xa7ffffff 64bit pref]
pci 0000:0a:00.2: BAR 15: can't assign mem pref (size 0x100000)
pci 0000:0b:02.0: BAR 6: assigned [mem 0xa8000000-0xa80fffff pref]
pci 0000:0a:00.0: PCI bridge to [bus 0b-0b]
pci 0000:0a:00.0: PCI bridge to [bus 0b-0b]
pci 0000:0a:00.0:   bridge window [io  0x3000-0x3fff]
pci 0000:0a:00.0:   bridge window [mem 0xac500000-0xae4fffff]
pci 0000:0a:00.0:   bridge window [mem 0xa8000000-0xabffffff 64bit pref]
pci 0000:0c:02.0: BAR 6: assigned [mem 0xac420000-0xac43ffff pref]
pci 0000:0a:00.2: PCI bridge to [bus 0c-0c]
pci 0000:0a:00.2: PCI bridge to [bus 0c-0c]
pci 0000:0a:00.2:   bridge window [io  disabled]
pci 0000:0a:00.2:   bridge window [mem 0xac400000-0xac4fffff]
pci 0000:0a:00.2:   bridge window [mem pref disabled]
pci 0000:00:06.0: PCI bridge to [bus 0a-0d]
pci 0000:00:06.0: PCI bridge to [bus 0a-0d]
pci 0000:00:06.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:06.0:   bridge window [mem 0xac400000-0xae5fffff]
pci 0000:00:06.0:   bridge window [mem 0xa8000000-0xabffffff 64bit pref]
pci 0000:0f:0e.0: BAR 6: assigned [mem 0xac020000-0xac03ffff pref]
pci 0000:0e:00.0: PCI bridge to [bus 0f-0f]
pci 0000:0e:00.0: PCI bridge to [bus 0f-0f]
pci 0000:0e:00.0:   bridge window [io  disabled]
pci 0000:0e:00.0:   bridge window [mem 0xac200000-0xac2fffff]
pci 0000:0e:00.0:   bridge window [mem 0xac000000-0xac0fffff 64bit pref]
pci 0000:0e:00.2: PCI bridge to [bus 10-10]
pci 0000:0e:00.2: PCI bridge to [bus 10-10]
pci 0000:0e:00.2:   bridge window [io  disabled]
pci 0000:0e:00.2:   bridge window [mem disabled]
pci 0000:0e:00.2:   bridge window [mem pref disabled]
pci 0000:00:07.0: PCI bridge to [bus 0e-10]
pci 0000:00:07.0: PCI bridge to [bus 0e-10]
pci 0000:00:07.0:   bridge window [io  disabled]
pci 0000:00:07.0:   bridge window [mem 0xac200000-0xac3fffff]
pci 0000:00:07.0:   bridge window [mem 0xac000000-0xac0fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 11-11]
pci 0000:00:1e.0: PCI bridge to [bus 11-11]
pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1e.0:   bridge window [mem 0xac100000-0xac1fffff]
pci 0000:00:1e.0:   bridge window [mem 0x90000000-0x97ffffff pref]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
  alloc irq_desc for 47 on node -1
  alloc kstat_irqs on node -1
pci 0000:0a:00.0: PCI INT A -> GSI 47 (level, low) -> IRQ 47
pci 0000:0a:00.0: setting latency timer to 64
pci 0000:0a:00.2: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:0e:00.0: setting latency timer to 64
pci 0000:0e:00.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffff]
pci_bus 0000:01: resource 0 [io  0x7000-0x7fff]
pci_bus 0000:01: resource 1 [mem 0xb4600000-0xb65fffff]
pci_bus 0000:01: resource 2 [mem 0x98000000-0x9bffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:03: resource 1 [mem 0xb2600000-0xb45fffff]
pci_bus 0000:03: resource 2 [mem 0x9c000000-0x9fffffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:06: resource 1 [mem 0xb0600000-0xb25fffff]
pci_bus 0000:06: resource 2 [mem 0xa0000000-0xa3ffffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:08: resource 1 [mem 0xae600000-0xb05fffff]
pci_bus 0000:08: resource 2 [mem 0xa4000000-0xa7ffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:0a: resource 1 [mem 0xac400000-0xae5fffff]
pci_bus 0000:0a: resource 2 [mem 0xa8000000-0xabffffff 64bit pref]
pci_bus 0000:0b: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:0b: resource 1 [mem 0xac500000-0xae4fffff]
pci_bus 0000:0b: resource 2 [mem 0xa8000000-0xabffffff 64bit pref]
pci_bus 0000:0c: resource 1 [mem 0xac400000-0xac4fffff]
pci_bus 0000:0e: resource 1 [mem 0xac200000-0xac3fffff]
pci_bus 0000:0e: resource 2 [mem 0xac000000-0xac0fffff 64bit pref]
pci_bus 0000:0f: resource 1 [mem 0xac200000-0xac2fffff]
pci_bus 0000:0f: resource 2 [mem 0xac000000-0xac0fffff 64bit pref]
pci_bus 0000:11: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:11: resource 1 [mem 0xac100000-0xac1fffff]
pci_bus 0000:11: resource 2 [mem 0x90000000-0x97ffffff pref]
pci_bus 0000:11: resource 4 [io  0x0000-0xffff]
pci_bus 0000:11: resource 5 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.0: PCI INT A disabled
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.1: PCI INT B disabled
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.7: PCI INT D disabled
pci 0000:0a:00.0: rerouting interrupts for [8086:0329]
pci 0000:0a:00.2: rerouting interrupts for [8086:032a]
pci 0000:0e:00.0: rerouting interrupts for [8086:0330]
pci 0000:0e:00.2: rerouting interrupts for [8086:0332]
pci 0000:11:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15827k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1351720268.024:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15939
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [3] registered
acpiphp: Slot [1] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [2] registered
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ERST: Table is not found!
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb6600000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-16-pve ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00008060
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-16-pve uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008040
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-16-pve uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008020
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-16-pve uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Bridge firewalling registered
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2012-10-31 21:51:09 UTC (1351720269)
Initalizing network drop monitor service
Freeing unused kernel memory: 1316k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 808k freed
Freeing unused kernel memory: 1684k freed
udev[255]: starting version 164
tg3.c:v3.122 (December 7, 2011)
  alloc irq_desc for 48 on node -1
  alloc kstat_irqs on node -1
tg3 0000:0c:02.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
tg3 0000:0c:02.0: eth0: Tigon3 [partno(BCM95704A6) rev 2100] (PCIX:133MHz:64-bit) MAC address 00:0e:0c:43:71:95
tg3 0000:0c:02.0: eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:0c:02.0: eth0: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
tg3 0000:0c:02.0: eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
  alloc irq_desc for 49 on node -1
  alloc kstat_irqs on node -1
tg3 0000:0c:02.1: PCI INT B -> GSI 49 (level, low) -> IRQ 49
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
tg3 0000:0c:02.1: eth1: Tigon3 [partno(BCM95704A6) rev 2100] (PCIX:133MHz:64-bit) MAC address 00:0e:0c:43:71:96
tg3 0000:0c:02.1: eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:0c:02.1: eth1: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:0c:02.1: eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megaraid: probe new device 0x1000:0x0408:0x8086:0x3449: bus 15:slot 14:func 0
  alloc irq_desc for 86 on node -1
  alloc kstat_irqs on node -1
megaraid 0000:0f:0e.0: PCI INT A -> GSI 86 (level, low) -> IRQ 86
megaraid: fw version:[514S] bios version:[H431]
scsi0 : LSI Logic MegaRAID driver
scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
Fusion MPT SPI Host driver 3.04.20
  alloc irq_desc for 24 on node -1
  alloc kstat_irqs on node -1
mptspi 0000:0b:02.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
mptbase: ioc0: Initiating bringup
usb 1-3: new high speed USB device number 2 using ehci_hcd
ioc0: LSI53C1030 B2: Capabilities={Initiator}
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x8080 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x8088 irq 15
usb 1-3: New USB device found, idVendor=0424, idProduct=2504
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-3: configuration #1 chosen from 1 choice
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 3 ports detected
Refined TSC clocksource calibration: 2593.499 MHz.
Switching to clocksource tsc
scsi 0:0:6:0: Processor         ESG-SHV  SCA HSBP M34     1.07 PQ: 0 ANSI: 2
ata1.00: ATAPI: PHILIPS DVD-ROM SDR089, TQ02, max UDMA/33
ata1.00: applying bridge limits
ata1.00: configured for UDMA/33
scsi: waiting for bus probes to complete ...
scsi3 : ioc0: LSI53C1030 B2, FwRev=01033500h, Ports=1, MaxQ=222, IRQ=24
usb 4-1: new low speed USB device number 2 using uhci_hcd
usb 4-1: New USB device found, idVendor=0d3d, idProduct=0001
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USBPS2
usb 4-1: configuration #1 chosen from 1 choice
input: USBPS2 as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input2
generic-usb 0003:0D3D:0001.0001: input,hidraw0: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1d.2-1/input0
input: USBPS2 as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input3
generic-usb 0003:0D3D:0001.0002: input,hidraw1: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1d.2-1/input1
scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices
scsi 3:0:8:0: Direct-Access     IFT      A16U-G2430       364R PQ: 0 ANSI: 4
scsi target3:0:8: Beginning Domain Validation
scsi target3:0:8: Ending Domain Validation
scsi target3:0:8: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS PCOMP (6.25 ns, offset 127)
scsi[0]: scanning scsi channel 2 [virtual] for logical drives
scsi 0:2:0:0: Direct-Access     MegaRAID LD 0 RAID0  140G 514S PQ: 0 ANSI: 2
scsi 0:2:1:0: Direct-Access     MegaRAID LD 1 RAID5  280G 514S PQ: 0 ANSI: 2
sd 0:2:0:0: [sda] 287109120 512-byte logical blocks: (146 GB/136 GiB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 00 00 00 00
sd 0:2:0:0: [sda] Asking for cache data failed
sd 0:2:0:0: [sda] Assuming drive cache: write through
sd 0:2:0:0: [sda] Asking for cache data failed
sd 0:2:0:0: [sda] Assuming drive cache: write through
sd 0:2:1:0: [sdb] 574218240 512-byte logical blocks: (293 GB/273 GiB)
sd 0:2:1:0: [sdb] Write Protect is off
sd 0:2:1:0: [sdb] Mode Sense: 00 00 00 00
 sda:
sd 0:2:1:0: [sdb] Asking for cache data failed
sd 0:2:1:0: [sdb] Assuming drive cache: write through
scsi 1:0:0:0: CD-ROM            PHILIPS  DVD-ROM SDR089   TQ02 PQ: 0 ANSI: 5
sd 3:0:8:0: [sdc] 3905982464 512-byte logical blocks: (1.99 TB/1.81 TiB)
 sda1 sda2
sd 3:0:8:0: [sdc] Write Protect is off
sd 3:0:8:0: [sdc] Mode Sense: 9b 00 00 08
sd 0:2:1:0: [sdb] Asking for cache data failed
sd 0:2:1:0: [sdb] Assuming drive cache: write through
 sdb:
sd 0:2:0:0: [sda] Asking for cache data failed
sd 0:2:0:0: [sda] Assuming drive cache: write through
sd 0:2:0:0: [sda] Attached SCSI disk
 unknown partition table
sd 3:0:8:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:2:1:0: [sdb] Asking for cache data failed
sd 0:2:1:0: [sdb] Assuming drive cache: write through
sd 0:2:1:0: [sdb] Attached SCSI disk
 sdc: sdc1 sdc2
sd 3:0:8:0: [sdc] Attached SCSI disk
scsi 0:0:6:0: Attached scsi generic sg0 type 3
sd 0:2:0:0: Attached scsi generic sg1 type 0
sd 0:2:1:0: Attached scsi generic sg2 type 0
sr0: scsi3-mmc drive: 4x/24x cd/rw xa/form2 cdda tray
sd 3:0:8:0: Attached scsi generic sg3 type 0
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg4 type 5
EXT3-fs: barriers disabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (dm-0): mounted filesystem with ordered data mode
udev[650]: starting version 164
shpchp 0000:0a:00.0: HPC vendor_id 8086 device_id 329 ss_vid 0 ss_did 0
shpchp 0000:0a:00.0: Can't get msi for the hotplug controller
shpchp 0000:0a:00.0: Use INTx for the hotplug controller
shpchp 0000:0a:00.0: pci_hp_register failed with error -16
shpchp 0000:0a:00.0: Slot initialization failed
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_rng: FWH not detected
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[drm] Initialized drm 1.1.0 20060810
input: PC Speaker as /devices/platform/pcspkr/input/input4
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:11:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] initializing kernel modesetting (RV100 0x1002:0x5159 0x8086:0x3449).
[drm] register mmio base: 0xAC100000
[drm] register mmio size: 65536
radeon 0000:11:00.0: VRAM: 128M 0x0000000090000000 - 0x0000000097FFFFFF (16M used)
radeon 0000:11:00.0: GTT: 512M 0x0000000070000000 - 0x000000008FFFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 32bits DDR
[TTM] Zone  kernel: Available graphics memory: 4082514 kiB.
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[TTM] Initializing pool allocator.
[TTM] Initializing DMA pool allocator.
[drm] radeon: 16M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: ib pool ready.
[drm] PCIE GART of 512M enabled (table at 0x0000000037900000).
radeon 0000:11:00.0: WB disabled
[drm] fence driver on ring 0 use gpu addr 0x70000000 and cpu addr 0xffff8800378ab000
[drm] Loading R100 Microcode
platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[drm] radeon: ring at 0x0000000070001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] No TV DAC info found in BIOS
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   VGA
[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm]   Encoders:
[drm]     CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm]   VGA
[drm]   DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[drm]   Encoders:
[drm]     CRT2: INTERNAL_DAC2
[drm] Connector 2:
[drm]   DVI-I
[drm]   HPD1
[drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[drm]   Encoders:
[drm]     CRT2: INTERNAL_DAC2
[drm]     DFP1: INTERNAL_TMDS1
[drm] fb mappable at 0x90040000
[drm] vram apper at 0x90000000
[drm] size 786432
[drm] fb depth is 8
[drm]    pitch is 1024
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized radeon 2.13.0 20080528 for 0000:11:00.0 on minor 0
EXT3-fs (dm-0): using internal journal
Adding 7340024k swap on /dev/mapper/pve-swap.  Priority:-1 extents:1 across:7340024k
EXT3-fs: barriers disabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (dm-5): using internal journal
EXT3-fs (dm-5): mounted filesystem with ordered data mode
EXT3-fs: barriers disabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with ordered data mode
EXT3-fs: barriers disabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (dm-1): using internal journal
EXT3-fs (dm-1): mounted filesystem with ordered data mode
EXT3-fs: barriers disabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (dm-2): using internal journal
EXT3-fs (dm-2): mounted filesystem with ordered data mode
EXT3-fs: barriers disabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (dm-3): using internal journal
EXT3-fs (dm-3): mounted filesystem with ordered data mode
device eth0 entered promiscuous mode
tg3 0000:0c:02.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:0c:02.0: eth0: Flow control is off for TX and off for RX
vmbr0: port 1(eth0) entering forwarding state
Loading iSCSI transport class v2.0-870.
fuse init (API version 7.13)
iscsi: registered transport (tcp)
NET: Registered protocol family 10
iscsi: registered transport (iser)