Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- LibreELEC:~ # dmesg
- [ 0.000000@0] Booting Linux on physical CPU 0x200
- [ 0.000000@0] Linux version 3.10.99 (kszaq@CompileServer) (gcc version 6.2.0 (GCC) ) #1 SMP PREEMPT Mon Feb 20 17:00:49 CET 2017
- [ 0.000000@0] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
- [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000@0] Machine: Amlogic Meson8B, model: AMLOGIC
- [ 0.000000@0] physical memory start address is 0x200000
- [ 0.000000@0] reserved_end is bffffff
- [ 0.000000@0]
- [ 0.000000@0] Total memory is 1022 MiB
- [ 0.000000@0] Reserved low memory from 0x06000000 to 0x0bffffff, size: 96 MiB
- [ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB)
- [ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB)
- [ 0.000000@0] deinterlace0(high) : 0x3df00000 - 0x40000000 ( 33 MiB)
- [ 0.000000@0] mesonstream0(high) : 0x3bf00000 - 0x3df00000 ( 32 MiB)
- [ 0.000000@0] vdec0(low) : 0x07a00000 - 0x0ba00000 ( 64 MiB)
- [ 0.000000@0] ppmgr0(high) : 0x39f00000 - 0x3bf00000 ( 32 MiB)
- [ 0.000000@0] amvideocap0(low) : 0x0ba00000 - 0x0c000000 ( 6 MiB)
- [ 0.000000@0] get storage device: storage 1
- [ 0.000000@0] value=1
- [ 0.000000@0] get_storage_device : get storage device: storage 1
- [ 0.000000@0] get_storage_device : value=1
- [ 0.000000@0] [get_storage_device] storage_flag=1
- [ 0.000000@0] [get_storage_device] the storage device does NOT relate to eMMC, storage_flag=1
- [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000@0] On node 0 totalpages: 208640
- [ 0.000000@0] free_area_init_node: node 0, pgdat c07ac640, node_mem_map c09d9000
- [ 0.000000@0] Normal zone: 1520 pages used for memmap
- [ 0.000000@0] Normal zone: 0 pages reserved
- [ 0.000000@0] Normal zone: 166400 pages, LIFO batch:31
- [ 0.000000@0] HighMem zone: 330 pages used for memmap
- [ 0.000000@0] HighMem zone: 42240 pages, LIFO batch:7
- [ 0.000000@0] Meson chip version = RevA (1B:A - 0:B72)
- [ 0.000000@0] PERCPU: Embedded 7 pages/cpu @c1122000 s7232 r8192 d13248 u32768
- [ 0.000000@0] pcpu-alloc: s7232 r8192 d13248 u32768 alloc=8*4096
- [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 207120
- [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200n8 no_console_suspend storage=1 cvbsdrv=0 vdaccfg=0xa000 logo=osd1,loaded,0x7900000,1080p,full hdmimode=1080p cvbsmode=576cvbs androidboot.firstboot=0 hdmitx=cecf bootfromsd console=tty0 consoleblank=0 systemd.show_status=auto
- [ 0.000000@0] cvbs performance line = 0
- [ 0.000000@0] cvbs trimming line = 0xa000
- [ 0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0
- [ 0.000000@0] osd1:1
- [ 0.000000@0] loaded:268435459
- [ 0.000000@0] logo has been loaded
- [ 0.000000@0] 1080p:15
- [ 0.000000@0] full:2
- [ 0.000000@0] kernel get hdmimode form uboot is 1080p
- [ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs
- [ 0.000000@0] hdmitx: cec: Function List: enable, one touch play, one touch standby, auto power by tv
- [ 0.000000@0] hdmitx: cec: HDMI aml_read_reg32(P_AO_DEBUG_REG0):0xf
- [ 0.000000@0] hdmitx: cec: HDMI hdmi_cec_func_config:0xf
- [ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000@0] Memory: 64MB 16MB 735MB = 815MB total
- [ 0.000000@0] Memory: 814368k/814368k available, 20192k reserved, 168960K highmem
- [ 0.000000@0] Virtual kernel memory layout:
- [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000@0] .text : 0xc0008000 - 0xc0728b4c (7299 kB)
- [ 0.000000@0] .init : 0xc0729000 - 0xc0756c40 ( 184 kB)
- [ 0.000000@0] .data : 0xc0758000 - 0xc07ad478 ( 342 kB)
- [ 0.000000@0] .bss : 0xc07ad478 - 0xc09d4c1c (2206 kB)
- [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000@0] Preemptible hierarchical RCU implementation.
- [ 0.000000@0] RCU debugfs-based tracing is enabled.
- [ 0.000000@0] NR_IRQS:256
- [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
- [ 0.000000@0] Global timer: MESON TIMER-F (c0773080) initialized
- [ 0.000000@0] Switching to timer-based delay loop
- [ 0.000000@0] Console: colour dummy device 80x30
- [ 0.000000@0] console [tty0] enabled
- [ 0.000000@0] meson_serial_console_setup
- [ 0.000000@0] console [ttyS0] enabled
- [ 0.381743@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
- [ 0.392018@0] pid_max: default: 32768 minimum: 301
- [ 0.397019@0] Mount-cache hash table entries: 512
- [ 0.402656@0] CPU: Testing write buffer coherency: ok
- [ 0.406870@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
- [ 0.412358@0] Setting up static identity map for 0xc0544b00 - 0xc0544b58
- [ 0.419052@0] L310 cache controller enabled
- [ 0.423120@0] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c9, Cache size: 524288 B
- [ 0.430529@0] AUX_CTRL 0x7ec60001, PERFETCH_CTRL 0x75000007, POWER_CTRL 0x00000000
- [ 0.438655@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
- [ 0.500389@1] CPU1: Booted secondary processor
- [ 0.500409@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
- [ 0.520364@2] CPU2: Booted secondary processor
- [ 0.520383@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
- [ 0.540366@3] CPU3: Booted secondary processor
- [ 0.540385@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
- [ 0.540497@0] Brought up 4 CPUs
- [ 0.568696@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
- [ 0.574921@0] CPU: All CPU(s) started in SVC mode.
- [ 0.580488@0] devtmpfs: initialized
- [ 0.591456@0] clkrate [ xtal ] : 24000000
- [ 0.591512@0] clkrate [ pll_sys ] : 792000000
- [ 0.594356@0] clkrate [ pll_fixed ] : 2550000000
- [ 0.599031@0] clkrate [ pll_vid ] : 366000000
- [ 0.603465@0] clkrate [ pll_ddr ] : 0
- [ 0.607172@0] clkrate [ a9_clk ] : 792000000
- [ 0.611513@0] clkrate [ clk81 ] : 159375000
- [ 0.616834@0] pinctrl core: initialized pinctrl subsystem
- [ 0.621681@0] regulator-dummy: no parameters
- [ 0.625716@0] NET: Registered protocol family 16
- [ 0.634371@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- [ 0.639709@0] VPU driver version: v02
- [ 0.640707@0] load vpu_clk in dts: 182150000Hz(3)
- [ 0.645474@0] vpu_probe OK
- [ 0.655070@0] amlogic_gpio gpio: Probed amlogic GPIO driver
- [ 0.655950@0] register lm device lm-root
- [ 0.659057@0] register lm device lm1
- [ 0.662655@0] register lm device lm0
- [ 0.666406@0] Init pinux probe!
- [ 0.669949@0] pinmux-m8b pinmux: Probed amlogic pinctrl driver
- [ 0.675331@0] -------early_init_dt_init:115----------
- [ 0.679965@0] tv_init_module
- [ 0.682851@0] major number 254 for disp
- [ 0.686631@0] vout_register_server
- [ 0.690008@0] register tv module server ok
- [ 0.694274@0] call aml_dvfs_init in
- [ 0.697605@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs
- [ 0.697622@0] [DVFS]dvfs table of vcck_dvfs is:
- [ 0.697632@0] [DVFS] freq, min_uV, max_uV
- [ 0.697641@0] [DVFS] 96000, 860000, 860000
- [ 0.697650@0] [DVFS] 192000, 860000, 860000
- [ 0.697659@0] [DVFS] 312000, 860000, 860000
- [ 0.697668@0] [DVFS] 408000, 860000, 860000
- [ 0.697677@0] [DVFS] 504000, 860000, 860000
- [ 0.697686@0] [DVFS] 600000, 860000, 860000
- [ 0.697695@0] [DVFS] 720000, 860000, 860000
- [ 0.697704@0] [DVFS] 816000, 900000, 900000
- [ 0.697713@0] [DVFS] 1008000, 920000, 920000
- [ 0.697722@0] [DVFS] 1200000, 970000, 970000
- [ 0.697731@0] [DVFS] 1320000, 1100000, 1100000
- [ 0.697740@0] [DVFS] 1488000, 1100000, 1100000
- [ 0.697749@0] [DVFS] 1536000, 1140000, 1140000
- [ 0.698038@0] hdmitx: system: amhdmitx_init
- [ 0.701719@0] hdmitx: system: Ver: 2014May6
- [ 0.705956@0] hdmitx: system: amhdmitx_probe
- [ 0.710787@0] hdmitx: system: gate/pwr cmd: 7
- [ 0.714429@0] hdmitx: system: ALREADY init VIC = 16
- [ 0.719275@0] hdmitx: system: gate/pwr cmd: 0
- [ 0.724092@3] hdmitx: system: reset intr mask
- [ 0.740431@0] hdmitx: system: irq 3
- [ 0.740487@0] hdmitx: system: Unkown HDMI Interrupt Source
- [ 0.800339@0] bio: create slab <bio-0> at 0
- [ 0.801671@0] SCSI subsystem initialized
- [ 0.803469@0] usbcore: registered new interface driver usbfs
- [ 0.808580@0] usbcore: registered new interface driver hub
- [ 0.814126@0] usbcore: registered new device driver usb
- [ 0.820120@0] mode is 15,sync_duration_den=1,sync_duration_num=60
- [ 0.825153@0] request vpu clk holdings: vencp 159375000Hz
- [ 0.830542@0] TV mode 1080p selected.
- [ 0.834158@0] already display in uboot
- [ 0.837876@0] vinfo mode is: 1080p
- [ 0.845921@0] call aml_pmu_probe_init in
- [ 0.846290@0] get property: use_pwm, value:0x00000001, dec: 1
- [ 0.852904@0] get property: table_count, value:0x0000001d, dec: 29
- [ 0.860583@0] meson_cs_dvfs_probe, table count:29, use_pwm:1, pwm controller:2
- [ 0.860817@3] hdmitx: system: gate/pwr cmd: 4
- [ 0.872098@0] 0, 001c0000, 860000
- [ 0.875543@0] 1, 001b0001, 870000
- [ 0.879006@0] 2, 001a0002, 880000
- [ 0.882488@0] 3, 00190003, 890000
- [ 0.885933@0] 4, 00180004, 900000
- [ 0.889396@0] 5, 00170005, 910000
- [ 0.892871@0] 6, 00160006, 920000
- [ 0.896323@0] 7, 00150007, 930000
- [ 0.899792@0] 8, 00140008, 940000
- [ 0.903261@0] 9, 00130009, 950000
- [ 0.906714@0] 10, 0012000a, 960000
- [ 0.910187@0] 11, 0011000b, 970000
- [ 0.913647@0] 12, 0010000c, 980000
- [ 0.917105@0] 13, 000f000d, 990000
- [ 0.920580@0] 14, 000e000e, 1000000
- [ 0.924032@0] 15, 000d000f, 1010000
- [ 0.927495@0] 16, 000c0010, 1020000
- [ 0.930983@0] 17, 000b0011, 1030000
- [ 0.934423@0] 18, 000a0012, 1040000
- [ 0.937886@0] 19, 00090013, 1050000
- [ 0.941363@0] 20, 00080014, 1060000
- [ 0.944813@0] 21, 00070015, 1070000
- [ 0.948283@0] 22, 00060016, 1080000
- [ 0.951750@0] 23, 00050017, 1090000
- [ 0.955204@0] 24, 00040018, 1100000
- [ 0.958667@0] 25, 00030019, 1110000
- [ 0.962141@0] 26, 0002001a, 1120000
- [ 0.965600@0] 27, 0001001b, 1130000
- [ 0.969058@0] 28, 0000001c, 1140000
- [ 0.972591@0] get pin for pwm--------
- [ 0.976163@0] [DVFS]aml_dvfs_register_driver, driver meson-cs-dvfs regist success, mask:1, source id:1
- [ 0.976774@0] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.984258@0] Switching to clocksource Timer-E
- [ 1.003038@0] NET: Registered protocol family 2
- [ 1.003982@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 1.009346@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 1.015873@0] TCP: Hash tables configured (established 8192 bind 8192)
- [ 1.022325@0] TCP: reno registered
- [ 1.025605@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.031720@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.038486@0] NET: Registered protocol family 1
- [ 1.042978@0] RPC: Registered named UNIX socket transport module.
- [ 1.048746@0] RPC: Registered udp transport module.
- [ 1.053564@0] RPC: Registered tcp transport module.
- [ 1.058428@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.065091@0] wifi_dev_probe
- [ 1.067871@0] wifi_dt : interrupt_pin=GPIOX_21
- [ 1.072276@0] wifi_dt : irq_num=null
- [ 1.075818@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
- [ 1.077210@3] hdmitx: system: gate/pwr cmd: 5
- [ 1.077212@3] hdmitx: edid: edid ready
- [ 1.077216@3] hdmitx: system: gate/pwr cmd: 4
- [ 1.093353@0] wifi_dt : power_on_pin=GPIOAO_6
- [ 1.097664@0] wifi_dt : power_on_pin2=GPIOX_11
- [ 1.102063@0] interrupt_pin=118, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=107
- [ 1.111133@0] Unpacking initramfs...
- [ 1.244436@0] Freeing initrd memory: 1668K (c4e09000 - c4faa000)
- [ 1.247198@0] bounce pool size: 64 pages
- [ 1.260254@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.262420@0] NFS: Registering the id_resolver key type
- [ 1.265890@0] Key type id_resolver registered
- [ 1.270194@0] Key type id_legacy registered
- [ 1.275326@0] msgmni has been set to 1263
- [ 1.280061@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- [ 1.285849@0] io scheduler noop registered
- [ 1.289956@0] io scheduler fiops registered (default)
- [ 1.297180@3] hdmitx: system: gate/pwr cmd: 5
- [ 1.299049@0] loop: module loaded
- [ 1.300819@0] tun: Universal TUN/TAP device driver, 1.6
- [ 1.300824@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.301082@0] PPP generic driver version 2.4.2
- [ 1.301415@0] NET: Registered protocol family 24
- [ 1.301602@0] usbcore: registered new interface driver smsc95xx
- [ 1.301779@0] usbcore: registered new interface driver qf9700
- [ 1.301920@0] usbcore: registered new interface driver sr9600
- [ 1.302372@0] usbcore: registered new interface driver usb-storage
- [ 1.302652@0] mousedev: PS/2 mouse device common for all mice
- [ 1.302856@0] i2c /dev entries driver
- [ 1.303783@0] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.308045@0] usbcore: registered new interface driver usbhid
- [ 1.308048@0] usbhid: USB HID core driver
- [ 1.308857@0] zram: Created 1 device(s) ...
- [ 1.308880@0] vout_init_module
- [ 1.308943@0] start init vout module
- [ 1.309106@0] create vout attribute ok
- [ 1.309333@0] ge2d_init
- [ 1.309346@0] ge2d_dev major:247
- [ 1.309701@0] ge2d start monitor
- [ 1.309761@0] osd_init
- [ 1.309766@2] ge2d workqueue monitor start
- [ 1.309815@0] osd_probe, vinfo:c0572a3c
- [ 1.310250@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
- [ 1.310255@0] osd_probe, mydef_var:c07979c0, vinfo:c0572a3c
- [ 1.310262@0] init fbdev bpp is :32
- [ 1.310265@0] ---------------clear framebuffer0 memory
- [ 1.427018@3] hdmitx: edid: edid ready
- [ 1.429835@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0600000, size=1024K
- [ 1.429841@0] osd_probe, mydef_var:c07979c0, vinfo:c0572a3c
- [ 1.429844@0] don't find to display_size_default from mesonfb-dts
- [ 1.429846@0] init fbdev bpp is :24
- [ 1.453859@3] hdmitx: edid: check sum valid
- [ 1.457998@3] hdmitx: edid: check sum valid
- [ 1.462140@3] hdmitx: edid: blk0 raw data
- [ 1.463037@0] osd probe ok
- [ 1.463299@0] enter aml_sysled_init
- [ 1.463380@0] enter aml_sysled_probe
- [ 1.463383@0] start read sedio dts
- [ 1.463388@0] sysled pdata->name:aml-setio
- [ 1.463393@0] sysled pdata->red_led_mode:0
- [ 1.463397@0] sysled pdata->blue_led_mode:1
- [ 1.463406@0] red_led_gpio is 1
- [ 1.463411@0] blue_led_gpio is 1
- [ 1.475093@0] DI: di_init
- [ 1.475146@0] DI: di_probe
- [ 1.475853@0] aml_wdt_driver_init,306
- [ 1.475857@0] ** disable watchdog
- [ 1.476160@0] keys===========================================
- [ 1.476166@0] keys_devno=f400000
- [ 1.476513@0] securitykey: device aml_keys created
- [ 1.476532@0] amlkeys=0
- [ 1.476674@0] platform_driver_register--aml_keys_driver--------------------
- [ 1.477141@0] start uart_ao_ttyS0:(irq = 122)
- [ 1.477145@0] register uart_ao ok
- [ 1.477488@0] start uart_a_ttyS1:(irq = 58)
- [ 1.477492@0] register uart_a ok
- [ 1.477883@0] set uart_b pinmux use pinctrl subsystem
- [ 1.477887@0] P_AO_RTI_PIN_MUX_REG:5861
- [ 1.477909@0] start uart_b_ttyS2:(irq = 107)
- [ 1.477913@0] register uart_b ok
- [ 1.478267@0] start uart_d_ttyS4:(irq = 126)
- [ 1.478271@0] register uart_d ok
- [ 1.478519@0] dwc_otg: version 3.10a 12-MAY-2014
- [ 1.478551@0] dwc_otg_driver_probe NOT match
- [ 1.478592@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
- [ 1.478607@0] USB (1) use clock source: XTAL input
- [ 1.499745@1] Core Release: 3.10a
- [ 1.499760@1] Setting default values for core params
- [ 1.499772@1] curmode: 1, host_only: 1
- [ 1.519974@1] Using Buffer DMA mode
- [ 1.519981@1] OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 1.519985@1] Working on port type = HOST
- [ 1.520055@1] dwc_otg lm1: DWC OTG Controller
- [ 1.520083@1] dwc_otg lm1: new USB bus registered, assigned bus number 1
- [ 1.520121@1] dwc_otg lm1: irq 63, io mem 0x00000000
- [ 1.520126@1] -------hcd->flags.d32 = 0
- [ 1.520149@1] Init: Port Power? op_state=1
- [ 1.520151@1] Init1: Power Port (0)
- [ 1.520267@1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.520276@1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.520283@1] usb usb1: Product: DWC OTG Controller
- [ 1.520290@1] usb usb1: Manufacturer: Linux 3.10.99 dwc_otg_hcd
- [ 1.520296@1] usb usb1: SerialNumber: lm1
- [ 1.521058@1] hub 1-0:1.0: USB hub found
- [ 1.521078@1] hub 1-0:1.0: 1 port detected
- [ 1.521319@1] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
- [ 1.521333@1] USB (0) use clock source: XTAL input
- [ 1.542425@2] Core Release: 3.10a
- [ 1.542438@2] Setting default values for core params
- [ 1.542448@2] curmode: 1, host_only: 0
- [ 1.602636@2] Using Buffer DMA mode
- [ 1.602643@2] OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 1.602646@2] Working on port type = OTG
- [ 1.602650@2] Current port type: SLAVE
- [ 1.602716@2] dwc_otg lm0: DWC OTG Controller
- [ 1.602741@2] dwc_otg lm0: new USB bus registered, assigned bus number 2
- [ 1.602776@2] dwc_otg lm0: irq 62, io mem 0x00000000
- [ 1.602834@2] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.602843@2] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.602850@2] usb usb2: Product: DWC OTG Controller
- [ 1.602857@2] usb usb2: Manufacturer: Linux 3.10.99 dwc_otg_hcd
- [ 1.602864@2] usb usb2: SerialNumber: lm0
- [ 1.603596@2] hub 2-0:1.0: USB hub found
- [ 1.603616@2] hub 2-0:1.0: 1 port detected
- [ 1.603789@2] Dedicated Tx FIFOs mode
- [ 1.603947@2] using timer detect id change, ee760400
- [ 1.604229@2] boot_device_flag : 1
- [ 1.604240@2] ===========================================amlnf_init:642,nand device tree ok,dev-name:nand
- [ 1.604250@2] Nand PHY driver Version: 1.01.001.0006 (c) 2013 Amlogic Inc.
- [ 1.604255@2] amlnf_phy_init : amlnf init flag 0
- [ 1.604339@2] ######STS IRQ mode for nand driver
- [ 1.604415@2] NAND device id: ad de 14 a7 42 4a ad de
- [ 1.604423@2] detect NAND device: E revision 1Ynm NAND 8GiB H27UCG8T2E
- [ 1.623443@2] AML_NAND_NEW_OOB : new oob
- [ 1.623452@2] bus_cycle=6, bus_timing=8,system=3.9ns,flash->T_REA =16,flash->T_RHOH=15
- [ 1.623458@2] boot_device_flag = 1
- [ 1.625868@2] hynix nand get default reg value at blk:7, page:1792
- [ 1.627017@2] NAND CKECK : arg nbbt: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 0
- [ 1.631497@2] nand block at blk 6 is bad
- [ 1.631501@2] nand block at blk 7 is bad
- [ 1.632577@2] NAND CKECK : arg ncnf: arg_valid= 1, valid_blk_addr = 8, valid_page_addr = 0
- [ 1.633179@2] nand shipped bbt at block 0
- [ 1.634442@2] nand block at blk 6 is bad
- [ 1.634445@2] nand block at blk 7 is bad
- [ 1.660415@2] NAND CKECK : arg nkey: arg_valid= 1, valid_blk_addr = 5, valid_page_addr = 2
- [ 1.661000@2] i=0,register --- nand_key
- [ 1.662224@2] nand block at blk 6 is bad
- [ 1.662228@2] nand block at blk 7 is bad
- [ 1.697985@2] NAND CKECK : arg nenv: arg_valid= 1, valid_blk_addr = 9, valid_page_addr = 108
- [ 1.700776@2] nand blk 6 is shipped bad block
- [ 1.700781@2] nand blk 7 is shipped bad block
- [ 1.700826@2] nand adjust phy offset : block 4
- [ 1.700841@2] nand adjust phy offset : block 4
- [ 1.700871@2] nfboot : offset: 0x000000000000 -0x000001000000 : partitons 0 : single_chip single_plane
- [ 1.700878@2] nfcache : offset: 0x00000d800000 -0x000026000000 : partitons 1 : single_chip multi_plane
- [ 1.700884@2] nfcode : offset: 0x000033800000 -0x000053000000 : partitons 5 : single_chip multi_plane
- [ 1.700890@2] nfdata : offset: 0x000086800000 -0x000179800000 : partitons 1 : single_chip multi_plane
- [ 1.700989@2] bad block count = 0
- [ 1.700989@2]
- [ 1.702586@2] bad block count = 0
- [ 1.702586@2]
- [ 1.706061@2] bad block count = 0
- [ 1.706061@2]
- [ 1.721946@2] bad block count = 0
- [ 1.721946@2]
- [ 1.721950@2] amlnand_add_nftl:
- [ 1.722316@2] Creating 1 ntd partitions
- [ 1.722322@2] block_num 76
- [ 1.723941@2] ------init_ntd
- [ 1.724511@2] ntd: Giving out device 0 to nfcache
- [ 1.724516@2] Creating 5 ntd partitions
- [ 1.724521@2] block_num 166
- [ 1.728467@2] ntd: Giving out device 1 to nfcode
- [ 1.728472@2] Creating 1 ntd partitions
- [ 1.728477@2] block_num 755
- [ 1.744771@2] ntd: Giving out device 2 to nfdata
- [ 1.745580@2] boot_device_flag : 1
- [ 1.745584@2] register_ntd_blktrans start
- [ 1.745591@2] ntd device 250!
- [ 1.745594@2] ntd->name: nfcache
- [ 1.745603@2] adjust_block_num : 4,reserved_block_ratio 10
- [ 1.745610@2] nftl version 140911a
- [ 1.745624@2] nftl part attr 0
- [ 1.747268@2] nftl start:76,12
- [ 1.747479@2] first
- [ 1.822348@2] average_erase_count:0
- [ 1.822353@2] second 19,64
- [ 1.822356@2] part->max_discard_block = 4
- [ 1.843608@2] all block full!!
- [ 1.843611@2] all discard block full!!
- [ 1.843626@2] free list:
- [ 1.843630@2] free block cnt = 66
- [ 1.843635@2] new current block is 62
- [ 1.843637@2] total discard page count is 0
- [ 1.843644@2] create_part_list:1235,current_used_discard_block=55,current_discard_block_used_count=38
- [ 1.844179@2] unmappig_pages=15605,discarded_pages=0,mapping_pages=779
- [ 1.844180@2] nftl ok!
- [ 1.845486@2] Enable QUEUE_FLAG_DISCARD for NFTL
- [ 1.846233@2] aml_nftl_add_ntd ok
- [ 1.846238@2] ntd device 250!
- [ 1.846242@2] ntd->name: nfcode
- [ 1.846249@2] adjust_block_num : 4,reserved_block_ratio 10
- [ 1.846263@2] nftl version 140911a
- [ 1.846293@2] nftl part attr 0
- [ 1.849831@2] size_in_blk 166; total_block 164;
- [ 1.849836@2] nftl start:164,19
- [ 1.850175@2] first
- [ 1.983195@2] found discard block:139
- [ 2.007143@2] average_erase_count:2
- [ 2.007150@2] second 161,145
- [ 2.007153@2] part->max_discard_block = 4
- [ 2.150098@3] 00ffffffffffff0034a9afa00101010100140103800000780adaffa3584aa229
- [ 2.157181@3] 17494b00000001010101010101010101010101010101023a801871382d40582c
- [ 2.166909@0] HOST mode
- [ 2.164367@3] 4500ba882100001e011d8018711c1620582c2500ba882100009e000000fc0050
- [ 2.166982@3] 616e61736f6e69635456300a000000fd00173d0f440f000a20202020202001c7
- [ 2.167039@3]
- [ 2.167042@3] hdmitx: edid: blk1 raw data
- [ 2.167044@3] 02032a71499005200403020706012309070173030c001000b82d2fc007814901
- [ 2.167100@3] fe0608000000e3051f01011d007251d01e206e285500ba882100001e8c0ad08a
- [ 2.167158@3] 20e02d10103e9600ba88210000188c0ad08a20e02d10103e96000b8821000018
- [ 2.167217@3] 8c0aa01451f01600267c4300ba88210000980000000000000000000000000086
- [ 2.167275@3]
- [ 2.167850@3] hdmitx: edid: find IEEEOUT
- [ 2.167913@3] hdmitx: video: get current mode: 1080p
- [ 2.167927@3] is_similar_hdmi_vic[326] vic_old=16,mode_new=15
- [ 2.167932@3] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
- [ 2.167937@3] hdmitx: audio: audio channel num is 0
- [ 2.167945@3] hdmitx: audio: SPDIF
- [ 2.167960@3] hdmitx: audio: current VIC: 16
- [ 2.167962@3] hdmitx: audio: audio sample rate: 0
- [ 2.167964@3] hdmitx: audio: reset audio N para
- [ 2.167978@3] hdmitx: audio: PCM out to HDMI
- [ 2.187822@2] all block full!!
- [ 2.188799@2] currnet_discard_block1:139
- [ 2.194070@3] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
- [ 2.194074@3] hdmitx: audio: i2s_to_spdif_flag:1
- [ 2.194077@3] hdmitx: audio: Enable audio spdif to HDMI
- [ 2.194146@3] hdmi detect: plug.
- [ 2.199829@2] reach the last discard page:7
- [ 2.199932@2] free list:
- [ 2.199936@2] free block cnt = 53
- [ 2.199941@2] new current block is 30
- [ 2.199944@2] total discard page count is 7
- [ 2.199951@2] create_part_list:1235,current_used_discard_block=139,current_discard_block_used_count=230
- [ 2.201070@2] unmappig_pages=12850,discarded_pages=308,mapping_pages=23962
- [ 2.201072@2] nftl ok!
- [ 2.202589@2] Enable QUEUE_FLAG_DISCARD for NFTL
- [ 2.203401@2] Enable QUEUE_FLAG_DISCARD for NFTL
- [ 2.204155@2] Enable QUEUE_FLAG_DISCARD for NFTL
- [ 2.204907@2] Enable QUEUE_FLAG_DISCARD for NFTL
- [ 2.205628@2] Enable QUEUE_FLAG_DISCARD for NFTL
- [ 2.206214@2] aml_nftl_add_ntd ok
- [ 2.206219@2] ntd device 250!
- [ 2.206223@2] ntd->name: nfdata
- [ 2.206230@2] adjust_block_num : 4,reserved_block_ratio 10
- [ 2.206238@2] nftl version 140911a
- [ 2.206341@2] nftl part attr 0
- [ 2.222296@2] size_in_blk 755; total_block 742;
- [ 2.222300@2] nftl start:742,72
- [ 2.223457@2] first
- [ 2.396885@0] -------hcd->flags.d32 = 0
- [ 2.399799@0] Init: Port Power? op_state=1
- [ 2.403848@0] Init1: Power Port (0)
- [ 2.407362@0] set usb port power on (board gpio 5)!
- [ 2.582528@2] found discard block:375
- [ 2.796899@1] Indeed it is in host mode hprt0 = 00021501
- [ 2.938863@2] average_erase_count:0
- [ 2.938933@2] second 539,670
- [ 2.939589@2] part->max_discard_block = 4
- [ 2.976876@1] usb 2-1: new high-speed USB device number 2 using dwc_otg
- [ 2.977995@3] Indeed it is in host mode hprt0 = 00001101
- [ 3.177701@3] usb 2-1: New USB device found, idVendor=7392, idProduct=a812
- [ 3.178965@3] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 3.186236@3] usb 2-1: Product: Edimax AC600 USB
- [ 3.190844@3] usb 2-1: Manufacturer: Realtek
- [ 3.195068@3] usb 2-1: SerialNumber: 00e04c000001
- [ 3.546526@2] all block full!!
- [ 3.547543@2] currnet_discard_block1:375
- [ 3.555508@2] reach the last discard page:5
- [ 3.556897@2] free list:
- [ 3.556938@2] free block cnt = 281
- [ 3.560048@2] new current block is 206
- [ 3.563770@2] total discard page count is 5
- [ 3.567946@2] create_part_list:1235,current_used_discard_block=375,current_discard_block_used_count=396
- [ 3.582792@2] unmappig_pages=137959,discarded_pages=8652,mapping_pages=24909
- [ 3.584291@2] nftl ok!
- [ 3.588204@2] Enable QUEUE_FLAG_DISCARD for NFTL
- [ 3.591920@2] aml_nftl_add_ntd ok
- [ 3.594524@2] init_aml_nftl end
- [ 3.600700@2] amvideocap_init_module
- [ 3.601247@2] amvideocap_probe,amvideocap
- [ 3.605164@2] amvideocap_dev_register buf:0ba00000,size:600000.
- [ 3.611745@2] Amlogic A/V streaming port init
- [ 3.618288@3] buffersize=262144,0,start=0
- [ 3.619372@3] Subtitle stbuf alloced at 0xee8c0000, size = 262144
- [ 3.625422@3] changed the (2) buffer size from 0 to 262144
- [ 3.631375@3] init vdec memsource 7a00000->b9fffff
- [ 3.635992@3] [tsync_pcr_init]init success.
- [ 3.640101@3] regist mpeg12 codec profile
- [ 3.644033@3] regist mpeg4 codec profile
- [ 3.647780@3] amvdec_vc1 module init
- [ 3.651486@3] regist vc1 codec profile
- [ 3.655034@3] amvdec_h264 module init
- [ 3.658917@3] regist h264 codec profile
- [ 3.662481@3] amvdec_h264mvc module init
- [ 3.666543@3] regist hmvc codec profile
- [ 3.670207@3] amvdec_h265 module init
- [ 3.674005@3] regist hevc codec profile
- [ 3.677826@3] regist mjpeg codec profile
- [ 3.681530@3] amvdec_real module init
- [ 3.685331@3] regist real codec profile
- [ 3.688995@3] amvdec_avs module init
- [ 3.693160@3] alloc_keep_buffer keep_y_addr ede00000
- [ 3.697504@3] alloc_keep_buffer keep_u_addr ee500000
- [ 3.702409@3] alloc_keep_buffer keep_v_addr eda00000
- [ 3.707353@3] yaddr=ede00000,u_addr=ee500000,v_addr=eda00000
- [ 3.713584@3] create_ge2d_work_queue video task ok
- [ 3.718691@3] efuse===========================================
- [ 3.723999@3] efuse: device efuse created
- [ 3.727823@3] efuse--------------------------------------------
- [ 3.733484@3] SARADC Driver init.
- [ 3.737075@3] __saradc_probe__
- [ 3.886984@3] saradc calibration: ref_val = 510
- [ 3.887033@3] saradc calibration: ref_nominal = 512
- [ 3.890742@3] saradc calibration: coef = 4040
- [ 3.895270@3] Remote Driver
- [ 3.897960@3] Remote platform_data g_remote_base=fe600580
- [ 3.903251@3] set drvdata completed
- [ 3.906774@3] device_create_file completed
- [ 3.911685@3] input: aml_keypad as /devices/platform/meson-remote/input/input0
- [ 3.918719@3] input_register_device completed
- [ 3.922752@3] [0xffffff00] = 0x1dd0190
- [ 3.926417@3] [0xffffff04] = 0xf800ca
- [ 3.930077@3] [0xffffff08] = 0x82006e
- [ 3.933690@3] [0xffffff0c] = 0x3c0030
- [ 3.937343@3] [0xffffff10] = 0x30fa0013
- [ 3.941137@3] [0xffffff18] = 0x6f19000
- [ 3.944860@3] [0xffffff1c] = 0xbe40
- [ 3.948338@3] [0x0] = 0xfa00a0
- [ 3.951354@3] [0x4] = 0xfa00a0
- [ 3.954384@3] [0x8] = 0xfa00a0
- [ 3.957427@3] [0xc] = 0x640030
- [ 3.960446@3] [0x10] = 0x30fa0013
- [ 3.963736@3] [0x18] = 0x961b800
- [ 3.966952@3] [0x1c] = 0x9740
- [ 3.969884@3] [0x20] = 0x104
- [ 3.972741@3] [0x24] = 0x0
- [ 3.975425@3] [0x28] = 0x0
- [ 3.978123@3] set_remote_mode[69]
- [ 3.981429@3] remote config major:238
- [ 3.985525@3] physical address:0x2f65a000
- [ 3.989310@3] spi_nor_init
- [ 3.992043@3] amlogic_spi_nor_probe:
- [ 3.995347@3] amlogic_spi->state_name:default
- [ 3.999924@3] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated
- [ 4.007446@3] check_storage_device : spi boot_device_flag : -1
- [ 4.013005@3] spi_nor_probe
- [ 4.015777@3] spi_nor_probe 629 boot_device_flag 1 : do not init spi
- [ 4.022126@3] spi_nor: probe of apollospi:32766 failed with error -12
- [ 4.028522@3] amlogic_spi_nor_probe over
- [ 4.032655@3] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
- [ 4.042116@3] host->base fe108c20
- [ 4.045178@3] pdata->caps 7
- [ 4.047947@3] pdata->caps2 0
- [ 4.050760@3] get property: port, value:0x00000001
- [ 4.057272@3] get property: ocr_avail, value:0x00200000
- [ 4.063747@3] get property: f_min, value:0x000493e0
- [ 4.070255@3] get property: f_max, value:0x02faf080
- [ 4.076736@3] get property: f_max_w, value:0x02faf080
- [ 4.083244@3] get property: max_req_size, value:0x00020000
- [ 4.089737@3] get property: irq_in, value:0x00000003
- [ 4.096219@3] get property: irq_out, value:0x00000005
- [ 4.102733@3] get property: gpio_cd, str:CARD_6
- [ 4.108703@3] get property: pinname, str:sd
- [ 4.114318@3] get property: jtag_pin, str:CARD_0
- [ 4.120302@3] get property: card_type, value:0x00000005
- [ 4.126786@3] get property: gpio_dat3, str:CARD_4
- [ 4.132791@3] normal card in
- [ 4.166917@3] reg:2620,clearmask=80008,setmask=10001
- [ 4.166981@3] reg:2621,clearmask=ff000000,set pin=49
- [ 4.171288@3] reg:2623,clearmask=7000,setmask=7
- [ 4.175790@3] reg:2620,clearmask=200020,setmask=1
- [ 4.180552@3] reg:2622,clearmask=ff00,set pin=49
- [ 4.185141@3] reg:2623,clearmask=700000,setmask=7
- [ 4.190073@3] pdata->caps 10f
- [ 4.192761@3] pdata->caps2 0
- [ 4.195620@3] get property: port, value:0x00000000
- [ 4.196676@2] sd: new high speed SDHC card at address e624, clock 39843750, 4-bit-bus-width
- [ 4.197312@2] mmcblk0: sd:e624 SE16G 14.8 GiB
- [ 4.198617@2] mmcblk0: p1 p2
- [ 4.217812@3] get property: ocr_avail, value:0x00200000
- [ 4.224280@3] get property: f_min, value:0x000493e0
- [ 4.230790@3] get property: f_max, value:0x02faf080
- [ 4.237281@3] get property: max_req_size, value:0x00020000
- [ 4.243767@3] get property: pinname, str:sdio
- [ 4.249578@3] get property: card_type, value:0x00000003
- [ 4.356866@3] [aml_sdio_probe] aml_sdio_probe() success!
- [ 4.358301@0] host->base fe108e00
- [ 4.359931@0] pdata->caps 80000547
- [ 4.363289@0] pdata->caps2 20
- [ 4.366177@0] get property: port, value:0x00000005
- [ 4.372729@0] get property: ocr_avail, value:0x00200000
- [ 4.379207@0] get property: f_min, value:0x000493e0
- [ 4.385687@0] get property: f_max, value:0x05f5e100
- [ 4.392193@0] get property: max_req_size, value:0x00020000
- [ 4.398706@0] get property: pinname, str:emmc
- [ 4.404448@0] get property: card_type, value:0x00000001
- [ 4.410992@0] get property: gpio_dat3, str:BOOT_3
- [ 4.416972@0] [is_emmc_exist] host->storage_flag=1, POR_BOOT_VALUE=7
- [ 4.423236@0] [aml_sdhc_probe]: there is not eMMC/tsd, skip sdhc_c dts config!
- [ 4.506877@1] [aml_sdhc_probe] aml_sdhc_probe() success!
- [ 4.507181@1] [dsp]DSP start addr 0xc5e00000
- [ 4.510846@1] [dsp]register dsp to char divece(257)
- [ 4.516533@1] amlogic audio spdif interface device init!
- [ 4.521052@1] name=nand_key nand_key
- [ 4.525118@1] register_aes_algorithm:488,new way
- [ 4.529145@1] unkown current key-name,key_read_show:1396
- [ 4.534366@1] get keyexample fail, aml_rtc_probe:755
- [ 4.539521@1] rtc clock error
- [ 4.542554@1] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
- [ 4.548373@1] rtc clock error
- [ 4.551297@1] rtc clock error
- [ 4.554241@1] rtc clock error
- [ 4.557202@1] rtc clock error
- [ 4.560129@1] rtc clock error
- [ 4.563073@1] rtc clock error
- [ 4.566018@1] rtc clock error
- [ 4.568975@1] rtc clock error
- [ 4.571905@1] rtc clock error
- [ 4.574849@1] rtc clock error
- [ 4.577805@1] rtc clock error
- [ 4.583148@1] amaudio2: device amaudio2 created
- [ 4.585423@1] Amlogic CEC Driver, (c) 2016 Gerald Dachs, Version: 0.0.1
- [ 4.592156@1] Error: Didn't get power valid value --- wifi_power_probe 323
- [ 4.598642@1] wifi_power power_gpio is 6
- [ 4.602514@1] wifi_power power_gpio2 is 108
- [ 4.607289@1] amlogic rfkill init
- [ 4.610026@1] enter bt_probe of_node
- [ 4.610045@1] not get gpio_en
- [ 4.612900@1] not get gpio_wake
- [ 4.637096@1] wifi_request_32k_clk : OFF-->ON for bt_rfkill
- [ 4.637156@1] clock_32k_pin(107) : (null)
- [ 4.641045@1] clock_32k_pin(107) : sdio_wifi
- [ 4.807531@1] UMP: UMP device driver loaded
- [ 4.808015@1] aml_aes aml_aes: Aml AES
- [ 4.810496@1] aml_tdes aml_tdes: Aml TDES
- [ 4.815117@1] enter rt5616_modinit
- [ 4.817650@1] dummy_codec_platform_probe
- [ 4.821552@1] == ES8323 == es8323_modinit()
- [ 4.826119@1] enter aml_i2s_dai_probe
- [ 4.826134@1] i2s get no clk src setting in dts, use the default mpll 0
- [ 4.832006@1] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000
- [ 4.840172@1] enter aml_pcm_dai_probe
- [ 4.840357@1] [aml-spdif-dai]enter aml_dai_spdif_init
- [ 4.844884@1] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4
- [ 4.851996@1] audio_set_958_clk, freq=4,
- [ 4.855881@1] IEC958 16bit
- [ 4.858577@1] hdmitx: audio: aout notify rate 48000
- [ 4.863408@1] hdmitx: audio: aout notify size 16
- [ 4.868013@1] hdmitx: audio: aout notify format CT_PCM
- [ 4.873110@1] hdmitx: audio: audio channel num is 1
- [ 4.877971@1] hdmitx: audio: SPDIF
- [ 4.881341@1] hdmitx: audio: current VIC: 16
- [ 4.885574@1] hdmitx: audio: audio sample rate: 3
- [ 4.890268@1] hdmitx: audio: reset audio N para
- [ 4.894761@1] hdmitx: audio: PCM out to HDMI
- [ 4.899010@1] hdmitx: audio: i2s_to_spdif_flag:1
- [ 4.903671@1] hdmitx: audio: Enable audio spdif to HDMI
- [ 4.908882@1] hdmitx: audio: Audio Type: PCM
- [ 4.913158@1] hdmitx: audio: set audio param
- [ 4.917454@1] [aml-spdif-dai]aml_spdif_probe
- [ 4.921904@1] test codec rt5616
- [ 4.924715@1] test_codec_of_node, node rt5616 disable
- [ 4.929756@1] test codec rt5631
- [ 4.932853@1] test_codec_of_node, node rt5631 disable
- [ 4.937888@1] test codec wm8960
- [ 4.940992@1] test_codec_of_node, node wm8960 disable
- [ 4.946014@1] test codec dummy_codec
- [ 4.949578@1] using external codec, index = 4
- [ 4.953892@1] using external dummy codec
- [ 4.958095@1] enter spdif_dit_probe
- [ 4.961339@1] aml_spdif_unmute
- [ 4.964754@1] codec_name = dummy_codec.0
- [ 4.968732@1] enter aml_asoc_init
- [ 4.968779@1] p_aml_audio->hp_disable=1
- [ 4.972165@1] falied to get spk event delay time paraments from dts file
- [ 4.978852@1] spk_event delay_time = 0
- [ 4.983393@1] aml-i2s 0:playback preallocate_dma_buffer: area=f0701000, addr=2de00000, size=524288
- [ 4.991734@1] aml-i2s 1:capture preallocate_dma_buffer: area=f0783000, addr=2df00000, size=65536
- [ 5.000265@1] aml_snd_m8 aml_m8_sound_card.4: dummy_codec <-> aml-i2s-dai.0 mapping ok
- [ 5.009218@1] aml-i2s 0:playback preallocate_dma_buffer: area=f07a4000, addr=2d800000, size=524288
- [ 5.017359@1] aml-i2s 1:capture preallocate_dma_buffer: area=f0826000, addr=2dec0000, size=65536
- [ 5.025880@1] aml_snd_m8 aml_m8_sound_card.4: dit-hifi <-> aml-spdif-dai.0 mapping ok
- [ 5.035485@2] -----ext_codec=1---
- [ 5.037064@2] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0
- [ 5.043374@3] TCP: cubic registered
- [ 5.047474@3] NET: Registered protocol family 10
- [ 5.051723@3] NET: Registered protocol family 17
- [ 5.055727@3] Key type dns_resolver registered
- [ 5.060688@3] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
- [ 5.067889@3] Registering SWP/SWPB emulation handler
- [ 5.072780@3] enter meson_pm_init
- [ 5.076236@3] enter meson_pm_probe!
- [ 5.079570@3] meson_pm_probe done !
- [ 5.083039@3] AO cpu runs ok.
- [ 5.087507@3] regulator-dummy: disabling
- [ 5.090376@0] console [netcon0] enabled
- [ 5.093646@0] netconsole: network logging started
- [ 5.098478@0] rtc clock error
- [ 5.101302@0] aml_rtc rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
- [ 5.108823@0] meson_cpufreq_probe:SYSPLL request to be fixed
- [ 5.114294@0] meson_cpufreq: no voltage_control prop
- [ 5.119243@0] voltage_control = 0
- [ 5.123618@0] buf[0]=f2,buf[1]=af,err=4
- [ 5.126289@0] adc=383,TS_C=18,flag=1
- [ 5.129891@0] efuse_flag=a
- [ 5.132525@0] amlogic_thermal_probe, this chip is trimmed, use thermal
- [ 5.139056@0] amlogic-thermal aml_thermal: amlogic thermal probe start
- [ 5.145515@0] #thermal-cells=7
- [ 5.148574@0] pdata->temp_trip_count=7
- [ 5.152270@0] temperature=60000 on trip point=0
- [ 5.156768@0] fixing high_freq=1536001 to 1536000 at trip point 0,level=0
- [ 5.163537@0] fixing low_freq=1536001 to 1536000 at trip point 0,level=0
- [ 5.170190@0] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
- [ 5.176596@0] cpu[0] core num==3
- [ 5.179831@0] gpu[0] core num==2
- [ 5.183004@0] temperature=65000 on trip point=1
- [ 5.187529@0] fixing high_freq=1488001 to 1250000 at trip point 1,level=1
- [ 5.194260@0] fixing low_freq=1488001 to 1250000 at trip point 1,level=1
- [ 5.200929@0] gpu[1].gpu_high_freq=426,tmp_level[1].gpu_high_freq=426
- [ 5.207355@0] cpu[1] core num==3
- [ 5.210539@0] gpu[1] core num==2
- [ 5.213759@0] temperature=70000 on trip point=2
- [ 5.218267@0] fixing high_freq=1320001 to 1250000 at trip point 2,level=1
- [ 5.224999@0] fixing low_freq=1320001 to 1250000 at trip point 2,level=1
- [ 5.231683@0] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
- [ 5.238095@0] cpu[2] core num==2
- [ 5.241278@0] gpu[2] core num==2
- [ 5.244482@0] temperature=75000 on trip point=3
- [ 5.249013@0] fixing high_freq=1200001 to 768000 at trip point 3,level=2
- [ 5.255651@0] fixing low_freq=1200001 to 768000 at trip point 3,level=2
- [ 5.262233@0] gpu[3].gpu_high_freq=328,tmp_level[3].gpu_high_freq=328
- [ 5.268669@0] cpu[3] core num==2
- [ 5.271843@0] gpu[3] core num==1
- [ 5.275047@0] temperature=80000 on trip point=4
- [ 5.279571@0] fixing high_freq=1008001 to 768000 at trip point 4,level=2
- [ 5.286217@0] fixing low_freq=1008001 to 768000 at trip point 4,level=2
- [ 5.292799@0] gpu[4].gpu_high_freq=328,tmp_level[4].gpu_high_freq=328
- [ 5.299234@0] cpu[4] core num==2
- [ 5.302409@0] gpu[4] core num==1
- [ 5.305613@0] temperature=90000 on trip point=5
- [ 5.310137@0] fixing high_freq=720001 to 384000 at trip point 5,level=3
- [ 5.316696@0] fixing low_freq=720001 to 384000 at trip point 5,level=3
- [ 5.323191@0] gpu[5].gpu_high_freq=251,tmp_level[5].gpu_high_freq=251
- [ 5.329617@0] cpu[5] core num==1
- [ 5.332818@0] gpu[5] core num==1
- [ 5.336005@0] temperature=260000 on trip point=6
- [ 5.340629@0] fixing high_freq=-1 to -22 at trip point 6,level=-1
- [ 5.346671@0] fixing low_freq=-1 to -22 at trip point 6,level=-1
- [ 5.352631@0] gpu[6].gpu_high_freq=-1,tmp_level[6].gpu_high_freq=-1
- [ 5.358886@0] cpu[6] core num==-1
- [ 5.362155@0] gpu[6] core num==-1
- [ 5.365462@0] idle interval=1000
- [ 5.368672@0] pdata->name:aml_thermal
- [ 5.372672@0] tmp_trip[0].cpu_core_upper=1
- [ 5.376365@0] tmp_trip[1].cpu_core_upper=1
- [ 5.380477@0] tmp_trip[2].cpu_core_upper=2
- [ 5.384507@0] tmp_trip[3].cpu_core_upper=2
- [ 5.388597@0] tmp_trip[4].cpu_core_upper=2
- [ 5.392641@0] tmp_trip[5].cpu_core_upper=3
- [ 5.396722@0] tmp_trip[6].cpu_core_upper=-1
- [ 5.400895@0] aml_thermal bind thermal-cpucore-0 okay !
- [ 5.406111@0] aml_thermal bind thermal-cpufreq-0 okay !
- [ 5.411406@0] amlogic: Kernel Thermal management registered
- [ 5.416806@0] amlogic-thermal aml_thermal: amlogic thermal probe done
- [ 5.423384@0] ALSA device list:
- [ 5.426318@0] #0: AML-M8AUDIO
- [ 5.429763@0] Freeing unused kernel memory: 180K (c0729000 - c0756000)
- [ 5.471193@1] tvmode set to 1080p
- [ 5.471193@1]
- [ 5.471214@1] don't set the same mode as current.
- [ 5.547292@1] vfm_map_store:rm default
- [ 5.547292@1]
- [ 5.547638@1] vfm_map_store:add default decoder ppmgr deinterlace amvideo
- [ 5.547638@1]
- [ 5.629773@1] Console: switching to colour frame buffer device 240x67
- [ 6.735397@1] force enable DISCARD here for ext4 fs
- [ 6.735414@1] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
- [ 6.735867@1] force enable DISCARD here for ext4 fs
- [ 6.735878@1] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
- [ 6.736281@1] force enable DISCARD here for ext4 fs
- [ 6.783469@1] checked enable EXT4 DISCARD here
- [ 6.783482@1] EXT4-fs (mmcblk0p2): mounting with "discard" option, but the device does not support discard
- [ 6.783489@1] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 7.291496@3] systemd[1]: System time before build time, advancing clock.
- [ 7.304059@3] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
- [ 7.304291@3] systemd[1]: Detected architecture arm.
- [ 7.304513@3] systemd[1]: Set hostname to <LibreELEC>.
- [ 7.394631@3] systemd[1]: Listening on RPCbind Server Activation Socket.
- [ 7.395212@3] systemd[1]: Reached target RPC Port Mapper.
- [ 7.395451@3] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 7.395603@3] systemd[1]: Reached target Swap.
- [ 7.395830@3] systemd[1]: Listening on udev Kernel Socket.
- [ 7.396074@3] systemd[1]: Listening on Journal Socket.
- [ 7.396337@3] systemd[1]: Listening on udev Control Socket.
- [ 7.396620@3] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 7.396857@3] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 7.397120@3] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 7.397245@3] systemd[1]: Reached target Paths.
- [ 7.397692@3] systemd[1]: Created slice System Slice.
- [ 7.399068@3] systemd[1]: Starting Setup machine-id...
- [ 7.399291@3] systemd[1]: dev-hugepages.mount: Couldn't determine result for ConditionVirtualization=!private-users, assuming failed: No such file or directory
- [ 7.402762@0] systemd[1]: Starting Load Kernel Modules...
- [ 7.405044@0] systemd[1]: Starting Show Version...
- [ 7.406676@0] systemd[1]: Mounting Temporary Directory...
- [ 7.409081@0] systemd[1]: Mounting Debug File System...
- [ 7.410756@0] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 7.447926@0] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 7.450399@0] systemd[1]: Mounting POSIX Message Queue File System...
- [ 7.452337@0] systemd[1]: Mounting Variable Directory...
- [ 7.453072@0] systemd[1]: Created slice User and Session Slice.
- [ 7.453327@0] systemd[1]: Reached target Slices.
- [ 7.454975@0] systemd[1]: Started Remount Root and Kernel File Systems.
- [ 7.472997@0] systemd[1]: Starting udev Coldplug all Devices...
- [ 7.520409@1] systemd[1]: Mounted Debug File System.
- [ 7.520724@1] systemd[1]: Mounted POSIX Message Queue File System.
- [ 7.520936@1] systemd[1]: Mounted Variable Directory.
- [ 7.525109@1] systemd[1]: Mounted Temporary Directory.
- [ 7.526237@1] systemd[1]: Started Show Version.
- [ 7.528300@1] systemd[1]: Started Create list of required static device nodes for the current kernel.
- [ 7.533348@1] systemd[1]: Starting Setup Timezone data...
- [ 7.547559@1] systemd[1]: Started Setup Timezone data.
- [ 7.570649@2] systemd[1]: Started Setup machine-id.
- [ 7.573292@2] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 7.575315@2] systemd[1]: Starting Journal Service...
- [ 7.580026@1] media: Linux media interface: v0.10
- [ 7.610167@3] systemd[1]: Started Create Static Device Nodes in /dev.
- [ 7.610605@0] Linux video capture interface: v2.00
- [ 7.610621@0] WARNING: You are using an experimental version of the media stack.
- [ 7.610621@0] As the driver is backported to an older kernel, it doesn't offer
- [ 7.610621@0] enough quality for its usage in production.
- [ 7.610621@0] Use it with care.
- [ 7.610621@0] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
- [ 7.610621@0] a02ff2e02bee64e9955dbfd8811874c3f3880f58 cx231xx: Fix TBS MAC reading.
- [ 7.610806@3] systemd[1]: Reached target Local File Systems (Pre).
- [ 7.611075@3] systemd[1]: Reached target Local File Systems.
- [ 7.628471@0] amlvideo-000: V4L2 device registered as video10
- [ 7.650493@2] pdata->tmp_trip[0].gpu_lower_level=1
- [ 7.650508@2] pdata->tmp_trip[0].gpu_upper_level=1
- [ 7.650530@2] pdata->tmp_trip[1].gpu_lower_level=2
- [ 7.650535@2] pdata->tmp_trip[1].gpu_upper_level=2
- [ 7.650547@2] pdata->tmp_trip[2].gpu_lower_level=4
- [ 7.650552@2] pdata->tmp_trip[2].gpu_upper_level=4
- [ 7.650563@2] pdata->tmp_trip[3].gpu_lower_level=4
- [ 7.650568@2] pdata->tmp_trip[3].gpu_upper_level=4
- [ 7.650580@2] pdata->tmp_trip[4].gpu_lower_level=4
- [ 7.650585@2] pdata->tmp_trip[4].gpu_upper_level=4
- [ 7.650598@2] pdata->tmp_trip[5].gpu_lower_level=4
- [ 7.650603@2] pdata->tmp_trip[5].gpu_upper_level=4
- [ 7.650615@2] pdata->tmp_trip[6].gpu_lower_level=-1
- [ 7.650625@2] pdata->tmp_trip[6].gpu_upper_level=-1
- [ 7.650638@2] aml_thermal bind thermal-gpufreq-0 okay !
- [ 7.650644@2] gpu cooling register okay with err=0
- [ 7.650806@2] tmp_trip[0].gpu_core_upper=0
- [ 7.650829@2] tmp_trip[1].gpu_core_upper=0
- [ 7.650841@2] tmp_trip[2].gpu_core_upper=0
- [ 7.650853@2] tmp_trip[3].gpu_core_upper=1
- [ 7.650864@2] tmp_trip[4].gpu_core_upper=1
- [ 7.650876@2] tmp_trip[5].gpu_core_upper=1
- [ 7.650888@2] tmp_trip[6].gpu_core_upper=-1
- [ 7.650900@2] aml_thermal bind thermal-gpucore-0 okay !
- [ 7.650906@2] gpu core cooling register okay with err=0
- [ 7.651039@2] Mali: Mali device driver loaded
- [ 7.652435@0] systemd[1]: Started Load Kernel Modules.
- [ 7.654606@0] systemd[1]: Starting Apply Kernel Variables...
- [ 7.671078@2] systemd[1]: Started Apply Kernel Variables.
- [ 7.749925@2] systemd[1]: Started Journal Service.
- [ 7.782235@1] systemd-journald[1173]: Received request to flush runtime journal from PID 1
- [ 8.892932@0] Console: switching to colour dummy device 80x30
- [ 8.943200@2] cur_mode = 0
- [ 8.943213@2] [0x0] = 0x1dd0190
- [ 8.943219@2] [0x4] = 0xf800ca
- [ 8.943223@2] [0x8] = 0x82006e
- [ 8.943227@2] [0xc] = 0x3c0030
- [ 8.943231@2] [0x10] = 0x30fa0013
- [ 8.943235@2] [0x18] = 0x6f19000
- [ 8.943239@2] [0x1c] = 0x9f40
- [ 8.943243@2] [0x20] = 0x0
- [ 8.943247@2] [0x24] = 0x0
- [ 8.943251@2] [0x28] = 0x0
- [ 8.943256@2] set_remote_mode[69]
- [ 8.987096@0] wifi_setup_dt
- [ 8.987119@0] wifi_request_32k_clk : ON-->ON for sdio_wifi
- [ 8.987126@0] interrupt_pin(118) : (null)
- [ 8.987153@0] reg:2620,clearmask=100010,setmask=0
- [ 8.987161@0] reg:2622,clearmask=ff,set pin=118
- [ 8.987166@0] reg:2623,clearmask=70000,setmask=4
- [ 8.987172@0] interrupt_pin(118) : sdio_wifi
- [ 8.987177@0] power_on_pin(6) : (null)
- [ 8.987189@0] power_on_pin(6) : sdio_wifi
- [ 8.987194@0] power_on_pin2(108) : (null)
- [ 8.987205@0] power_on_pin2(108) : sdio_wifi
- [ 9.169296@0] rtc clock error
- [ 9.174010@0] pps_core: LinuxPPS API ver. 1 registered
- [ 9.174025@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 9.176058@0] PTP clock support registered
- [ 9.199637@0] aml_nftl_open ok!
- [ 9.200228@3] aml_nftl_open ok!
- [ 9.201162@0] blktrans_ioctl -cmd: 5331,801c0204,64
- [ 9.202160@3] blktrans_ioctl -cmd: 5331,801c0204,64
- [ 9.205853@2] aml_nftl_open ok!
- [ 9.207057@0] aml_nftl_open ok!
- [ 9.209122@0] blktrans_ioctl -cmd: 5331,801c0204,64
- [ 9.209268@2] blktrans_ioctl -cmd: 5331,801c0204,64
- [ 9.213384@0] cfg80211: Calling CRDA to update world regulatory domain
- [ 9.213464@3] aml_nftl_open ok!
- [ 9.213553@0] cfg80211: World regulatory domain updated:
- [ 9.213562@0] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 9.213569@0] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (2000 mBi, 0 mBm)
- [ 9.213575@0] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (2000 mBi, 0 mBm)
- [ 9.213581@0] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (2000 mBi, 0 mBm)
- [ 9.213586@0] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
- [ 9.213592@0] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
- [ 9.213598@0] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (2000 mBi, 0 mBm)
- [ 9.213604@0] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
- [ 9.213610@0] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- [ 9.219308@2] blktrans_ioctl -cmd: 5331,801c0204,64
- [ 9.223101@3] aml_nftl_open ok!
- [ 9.225047@3] blktrans_ioctl -cmd: 5331,801c0204,64
- [ 9.226511@3] aml_nftl_open ok!
- [ 9.228717@3] blktrans_ioctl -cmd: 5331,801c0204,64
- [ 9.229812@2] ethernet base addr is fe0c0000
- [ 9.229847@2] unkown current key-name,key_read_show:1396
- [ 9.229857@2] ret = -22
- [ 9.229857@2] print_buff=
- [ 9.229868@2] unkown current key-name,key_read_show:1396
- [ 9.229873@2] ret = -22
- [ 9.229873@2] print_buff=
- [ 9.229896@2] efuse version is not selected.
- [ 9.229902@2] ID is not found
- [ 9.229955@2] DWMAC100
- [ 9.229963@2] stmmac - user ID: 0x10, Synopsys ID: 0x37
- [ 9.229967@2] Normal descriptors
- [ 9.229971@2] Ring mode enabled
- [ 9.063023@2] amlvideo openamlvideo close
- [ 9.229978@2] DMA HW capability register supported<6>[ 9.229984@2] RX Checksum Offload Engine supported (type 2)
- [ 9.229988@2] TX Checksum insertion supported
- [ 9.229992@2] Wake-Up On Lan supported
- [ 9.230026@2] Enable RX Mitigation via HW Watchdog Timer
- [ 9.297779@0] WIFI Disable! 6
- [ 9.564934@1] libphy: stmmac: probed
- [ 9.564950@1] eth0: PHY ID 0000ffff at 0 IRQ POLL (stmmac-0:00) active
- [ 9.564957@1] eth0: PHY ID 0000ffff at 1 IRQ POLL (stmmac-0:01) active
- [ 9.564963@1] eth0: PHY ID 0000ffff at 2 IRQ POLL (stmmac-0:02) active
- [ 9.564969@1] eth0: PHY ID 0000ffff at 3 IRQ POLL (stmmac-0:03) active
- [ 9.564975@1] eth0: PHY ID 0000ffff at 4 IRQ POLL (stmmac-0:04) active
- [ 9.564981@1] eth0: PHY ID 0000ffff at 5 IRQ POLL (stmmac-0:05) active
- [ 9.564987@1] eth0: PHY ID 0000ffff at 6 IRQ POLL (stmmac-0:06) active
- [ 9.564994@1] eth0: PHY ID 0000ffff at 7 IRQ POLL (stmmac-0:07) active
- [ 9.565000@1] eth0: PHY ID 0000ffff at 8 IRQ POLL (stmmac-0:08) active
- [ 9.565006@1] eth0: PHY ID 0000ffff at 9 IRQ POLL (stmmac-0:09) active
- [ 9.565012@1] eth0: PHY ID 0000ffff at 10 IRQ POLL (stmmac-0:0a) active
- [ 9.565018@1] eth0: PHY ID 0000ffff at 11 IRQ POLL (stmmac-0:0b) active
- [ 9.565024@1] eth0: PHY ID 0000ffff at 12 IRQ POLL (stmmac-0:0c) active
- [ 9.565031@1] eth0: PHY ID 0000ffff at 13 IRQ POLL (stmmac-0:0d) active
- [ 9.565037@1] eth0: PHY ID 0000ffff at 14 IRQ POLL (stmmac-0:0e) active
- [ 9.565043@1] eth0: PHY ID 0000ffff at 15 IRQ POLL (stmmac-0:0f) active
- [ 9.565049@1] eth0: PHY ID 0000ffff at 16 IRQ POLL (stmmac-0:10) active
- [ 9.565056@1] eth0: PHY ID 0000ffff at 17 IRQ POLL (stmmac-0:11) active
- [ 9.565062@1] eth0: PHY ID 0000ffff at 18 IRQ POLL (stmmac-0:12) active
- [ 9.565069@1] eth0: PHY ID 0000ffff at 19 IRQ POLL (stmmac-0:13) active
- [ 9.565076@1] eth0: PHY ID 0000ffff at 20 IRQ POLL (stmmac-0:14) active
- [ 9.565082@1] eth0: PHY ID 0000ffff at 21 IRQ POLL (stmmac-0:15) active
- [ 9.565088@1] eth0: PHY ID 0000ffff at 22 IRQ POLL (stmmac-0:16) active
- [ 9.565094@1] eth0: PHY ID 0000ffff at 23 IRQ POLL (stmmac-0:17) active
- [ 9.565100@1] eth0: PHY ID 0000ffff at 24 IRQ POLL (stmmac-0:18) active
- [ 9.565106@1] eth0: PHY ID 0000ffff at 25 IRQ POLL (stmmac-0:19) active
- [ 9.565113@1] eth0: PHY ID 0000ffff at 26 IRQ POLL (stmmac-0:1a) active
- [ 9.565119@1] eth0: PHY ID 0000ffff at 27 IRQ POLL (stmmac-0:1b) active
- [ 9.565125@1] eth0: PHY ID 0000ffff at 28 IRQ POLL (stmmac-0:1c) active
- [ 9.565131@1] eth0: PHY ID 0000ffff at 29 IRQ POLL (stmmac-0:1d) active
- [ 9.565137@1] eth0: PHY ID 0000ffff at 30 IRQ POLL (stmmac-0:1e) active
- [ 9.565143@1] eth0: PHY ID 0000ffff at 31 IRQ POLL (stmmac-0:1f) active
- [ 9.645126@0] RTL871X: module init start
- [ 9.645146@0] RTL871X: rtl8812au v4.3.20_16317.20160108
- [ 9.645152@0] RTL871X: build time: Feb 20 2017 17:01:27
- [ 9.745166@3] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=74:da:38:6c:7c:4c
- [ 9.746435@1] usbcore: registered new interface driver rtl8812au
- [ 9.746445@1] RTL871X: module init ret=0
- [ 9.991890@3] eth0: device MAC address 00:01:23:cd:ee:af
- [ 10.095057@3] stmmac_open: DMA initialization failed
- [ 10.376589@3] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 10.500963@3] thermal polling set for duration=0 msec
- [ 11.655189@2] IEC958 16bit
- [ 11.655205@2] hdmitx: audio: aout notify rate 48000
- [ 11.655211@2] hdmitx: audio: aout notify size 16
- [ 11.655215@2] hdmitx: audio: no update
- [ 11.655221@2] aml_i2s_close device type 8
- [ 11.681565@2] IEC958 16bit
- [ 11.681581@2] hdmitx: audio: aout notify rate 48000
- [ 11.681586@2] hdmitx: audio: aout notify size 16
- [ 11.681591@2] hdmitx: audio: no update
- [ 11.681597@2] aml_i2s_close device type 8
- [ 11.683829@2] IEC958 16bit
- [ 11.683841@2] hdmitx: audio: aout notify rate 48000
- [ 11.683846@2] hdmitx: audio: aout notify size 16
- [ 11.683851@2] hdmitx: audio: no update
- [ 11.683857@2] aml_i2s_close device type 8
- [ 11.684974@2] IEC958 16bit
- [ 11.684988@2] hdmitx: audio: aout notify rate 48000
- [ 11.684992@2] hdmitx: audio: aout notify size 16
- [ 11.684996@2] hdmitx: audio: no update
- [ 11.685002@2] aml_i2s_close device type 8
- [ 11.689708@2] IEC958 16bit
- [ 11.689722@2] hdmitx: audio: aout notify rate 48000
- [ 11.689727@2] hdmitx: audio: aout notify size 16
- [ 11.689731@2] hdmitx: audio: no update
- [ 11.689737@2] aml_i2s_close device type 8
- [ 11.691992@2] IEC958 16bit
- [ 11.692004@2] hdmitx: audio: aout notify rate 48000
- [ 11.692009@2] hdmitx: audio: aout notify size 16
- [ 11.692013@2] hdmitx: audio: no update
- [ 11.692019@2] aml_i2s_close device type 8
- [ 11.692817@2] IEC958 16bit
- [ 11.692830@2] hdmitx: audio: aout notify rate 48000
- [ 11.692835@2] hdmitx: audio: aout notify size 16
- [ 11.692838@2] hdmitx: audio: no update
- [ 11.692844@2] aml_i2s_close device type 8
- [ 11.694915@2] IEC958 16bit
- [ 11.694927@2] hdmitx: audio: aout notify rate 48000
- [ 11.694932@2] hdmitx: audio: aout notify size 16
- [ 11.694936@2] hdmitx: audio: no update
- [ 11.694941@2] aml_i2s_close device type 8
- [ 11.697163@2] IEC958 16bit
- [ 11.697176@2] hdmitx: audio: aout notify rate 48000
- [ 11.697181@2] hdmitx: audio: aout notify size 16
- [ 11.697189@2] hdmitx: audio: no update
- [ 11.697195@2] aml_i2s_close device type 8
- [ 11.698088@2] IEC958 16bit
- [ 11.698101@2] hdmitx: audio: aout notify rate 48000
- [ 11.698107@2] hdmitx: audio: aout notify size 16
- [ 11.698111@2] hdmitx: audio: no update
- [ 11.698120@2] aml_i2s_close device type 8
- [ 11.700484@2] IEC958 16bit
- [ 11.700501@2] hdmitx: audio: aout notify rate 48000
- [ 11.700507@2] hdmitx: audio: aout notify size 16
- [ 11.700511@2] hdmitx: audio: no update
- [ 11.700516@2] aml_i2s_close device type 8
- [ 11.702911@2] IEC958 16bit
- [ 11.702925@2] hdmitx: audio: aout notify rate 48000
- [ 11.702930@2] hdmitx: audio: aout notify size 16
- [ 11.702934@2] hdmitx: audio: no update
- [ 11.702940@2] aml_i2s_close device type 8
- [ 11.703914@2] IEC958 16bit
- [ 11.703928@2] hdmitx: audio: aout notify rate 48000
- [ 11.703933@2] hdmitx: audio: aout notify size 16
- [ 11.703937@2] hdmitx: audio: no update
- [ 11.703943@2] aml_i2s_close device type 8
- [ 11.705783@2] IEC958 16bit
- [ 11.705799@2] hdmitx: audio: aout notify rate 48000
- [ 11.705804@2] hdmitx: audio: aout notify size 16
- [ 11.705809@2] hdmitx: audio: no update
- [ 11.705815@2] aml_i2s_close device type 2
- [ 12.164400@1] RTL871X: rtw_set_802_11_connect(wlan0) fw_state=0x00000008
- [ 12.230761@3] RTL871X: start auth
- [ 12.503692@0] buf=0
- [ 12.503706@0] IEC958_mode_raw=0
- [ 12.510613@0] IEC958 16bit
- [ 12.510628@0] hdmitx: audio: aout notify rate 48000
- [ 12.510633@0] hdmitx: audio: aout notify size 16
- [ 12.510637@0] hdmitx: audio: no update
- [ 12.510643@0] aml_i2s_close device type 8
- [ 12.512845@0] IEC958 16bit
- [ 12.512859@0] hdmitx: audio: aout notify rate 48000
- [ 12.512864@0] hdmitx: audio: aout notify size 16
- [ 12.512868@0] hdmitx: audio: no update
- [ 12.512874@0] aml_i2s_close device type 8
- [ 12.514492@0] enter aml_asoc_hw_params stream: playback rate: 44100 format: 2
- [ 12.514667@0] [aml-i2s-dai]enterd aml_dai_i2s_prepare,old_samplerate:48000,sample_rate=44100
- [ 12.514683@0] [aml-i2s-dai]i2s dma f0701000,phy addr 2de00000,mode 0,ch 2
- [ 12.514689@0] ----aml_hw_iec958_init,runtime->rate=44100--
- [ 12.514696@0] [aml-spdif-dai]enterd aml_hw_iec958_init,set_clock:4,sample_rate=5
- [ 12.514700@0] audio_set_958_clk, freq=5,
- [ 12.514706@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
- [ 12.514712@0] iec958 mode PCM16
- [ 12.514718@0] IEC958 16bit
- [ 12.514724@0] hdmitx: audio: aout notify rate 44100
- [ 12.514728@0] hdmitx: audio: aout notify size 16
- [ 12.514735@0] hdmitx: audio: audio channel num is 1
- [ 12.514743@0] hdmitx: audio: SPDIF
- [ 12.514754@0] hdmitx: audio: current VIC: 16
- [ 12.514758@0] hdmitx: audio: audio sample rate: 2
- [ 12.514762@0] hdmitx: audio: reset audio N para
- [ 12.514773@0] hdmitx: audio: PCM out to HDMI
- [ 12.514778@0] hdmitx: audio: i2s_to_spdif_flag:1
- [ 12.514782@0] hdmitx: audio: Enable audio spdif to HDMI
- [ 12.514789@0] hdmitx: audio: Audio Type: PCM
- [ 12.514833@0] hdmitx: audio: set audio param
- [ 12.514838@0] [aml-spdif-dai]spdif dma f0701000,phy addr 2de00000
- [ 12.514926@0] speaker_events--mute =1
- [ 12.517148@1] [aml-i2s-dai]i2s dma f0701000,phy addr 2de00000,mode 0,ch 2
- [ 12.517159@1] ----aml_hw_iec958_init,runtime->rate=44100--
- [ 12.517165@1] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
- [ 12.517170@1] iec958 mode PCM16
- [ 12.517176@1] IEC958 16bit
- [ 12.517182@1] hdmitx: audio: aout notify rate 44100
- [ 12.517187@1] hdmitx: audio: aout notify size 16
- [ 12.517191@1] hdmitx: audio: no update
- [ 12.517196@1] [aml-spdif-dai]spdif dma f0701000,phy addr 2de00000
- [ 12.521988@1] [aml-i2s-dai]aiu i2s playback enable
- [ 12.521988@1]
- [ 12.522008@1] [aml-i2s-dai]audio_hw_958_enable 1
- [ 12.529216@3] RTL871X: auth success, start assoc
- [ 12.532016@3] RTL871X: assoc success
- [ 12.532154@3] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 12.548954@3] RTL871X: recv eapol packet
- [ 12.551313@1] RTL871X: send eapol packet
- [ 12.569991@3] RTL871X: recv eapol packet
- [ 12.570388@1] RTL871X: send eapol packet
- [ 12.570594@3] RTL871X: set pairwise key camid:4, addr:08:95:2a:57:98:69, kid:0, type:AES
- [ 12.572973@3] RTL871X: set group key camid:5, addr:08:95:2a:57:98:69, kid:1, type:AES
- [ 9.498002@0] amlvideo openamlvideo close
- [ 12.582876@0] amlvideo openhdmitx: cec: Set PWM_E out put RTC 32K!
- [ 14.042095@0] hdmitx: cec: enable:int mask:0x6
- [ 14.042958@0] hdmitx: cec: enable:int mask:0x6
- [ 14.485515@0] [amlogic] ##### cec write error! #####
- [ 14.663292@0] [amlogic] ##### cec write error! #####
- [ 16.077288@0] [amlogic] ##### cec write error! #####
- [ 16.253942@1] [amlogic] ##### cec write error! #####
- [ 16.432004@0] [amlogic] ##### cec write error! #####
- [ 16.609363@0] [amlogic] ##### cec write error! #####
- [ 16.786749@0] [amlogic] ##### cec write error! #####
- [ 16.963445@1] [amlogic] ##### cec write error! #####
- [ 17.140822@1] [amlogic] ##### cec write error! #####
- [ 17.321372@0] [amlogic] ##### cec write error! #####
- [ 17.498068@1] [amlogic] ##### cec write error! #####
- [ 17.681374@0] [amlogic] ##### cec write error! #####
- [ 17.858729@0] [amlogic] ##### cec write error! #####
- [ 18.036125@0] [amlogic] ##### cec write error! #####
- [ 18.212798@2] [amlogic] ##### cec write error! #####
- [ 18.390775@3] [amlogic] ##### cec write error! #####
- [ 18.570672@2] [amlogic] ##### cec write error! #####
- [ 18.751340@0] [amlogic] ##### cec write error! #####
- [ 18.928041@1] [amlogic] ##### cec write error! #####
- [ 19.110685@2] [amlogic] ##### cec write error! #####
- [ 19.290674@3] [amlogic] ##### cec write error! #####
- [ 19.470726@3] [amlogic] ##### cec write error! #####
- [ 19.650749@2] [amlogic] ##### cec write error! #####
- [ 19.802937@2] AO cpu stop ok.
- [ 19.803346@2] AO cpu runs ok.
- [ 19.803655@2] AO cpu stop ok.
- [ 19.804050@2] AO cpu runs ok.
- [ 19.830728@2] [amlogic] ##### cec write error! #####
- [ 20.010682@2] [amlogic] ##### cec write error! #####
- [ 20.190663@2] [amlogic] ##### cec write error! #####
- [ 20.370662@1] [amlogic] ##### cec write error! #####
- [ 20.550633@1] [amlogic] ##### cec write error! #####
- [ 72.712754@1] [aml-i2s-dai]aiu i2s playback disable
- [ 72.712754@1]
- [ 72.712769@1] [aml-i2s-dai]audio_hw_958_enable 0
- [ 72.712810@2] [aml-i2s-dai]i2s dma f0701000,phy addr 2de00000,mode 0,ch 2
- [ 72.712818@2] ----aml_hw_iec958_init,runtime->rate=44100--
- [ 72.712824@2] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
- [ 72.712831@2] iec958 mode PCM16
- [ 72.712838@2] IEC958 16bit
- [ 72.712844@2] hdmitx: audio: aout notify rate 44100
- [ 72.712849@2] hdmitx: audio: aout notify size 16
- [ 72.712853@2] hdmitx: audio: no update
- [ 72.712858@2] [aml-spdif-dai]spdif dma f0701000,phy addr 2de00000
- [ 82.713145@2] [aml-spdif-dai]enterd aml_spdif_play,set_clock:5,sample_rate=4
- [ 82.713157@2] audio_set_958_clk, freq=4,
- [ 82.713166@2] IEC958 16bit
- [ 82.713172@2] hdmitx: audio: aout notify rate 48000
- [ 82.713177@2] hdmitx: audio: aout notify size 16
- [ 82.713185@2] hdmitx: audio: audio channel num is 1
- [ 82.713193@2] hdmitx: audio: SPDIF
- [ 82.713204@2] hdmitx: audio: current VIC: 16
- [ 82.713208@2] hdmitx: audio: audio sample rate: 3
- [ 82.713212@2] hdmitx: audio: reset audio N para
- [ 82.713223@2] hdmitx: audio: PCM out to HDMI
- [ 82.713228@2] hdmitx: audio: i2s_to_spdif_flag:1
- [ 82.713232@2] hdmitx: audio: Enable audio spdif to HDMI
- [ 82.713239@2] hdmitx: audio: Audio Type: PCM
- [ 82.713282@2] hdmitx: audio: set audio param
- [ 82.713289@2] aml_i2s_close device type 8
- [ 87.722868@2] speaker_events--mute =0
- LibreELEC:~ #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement