API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 8th, 2014
16
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.94 KB | None | 0 0
raw download clone embed print report
  1. === START OF READ SMART DATA SECTION ===
  2. SMART overall-health self-assessment test result: PASSED
  3.  
  4. General SMART Values:
  5. Offline data collection status: (0x84) Offline data collection activity
  6. was suspended by an interrupting command from host.
  7. Auto Offline Data Collection: Enabled.
  8. Self-test execution status: ( 0) The previous self-test routine completed
  9. without error or no self-test has ever
  10. been run.
  11. Total time to complete Offline
  12. data collection: (14918) seconds.
  13. Offline data collection
  14. capabilities: (0x5b) SMART execute Offline immediate.
  15. Auto Offline data collection on/off support.
  16. Suspend Offline collection upon new
  17. command.
  18. Offline surface scan supported.
  19. Self-test supported.
  20. No Conveyance Self-test supported.
  21. Selective Self-test supported.
  22. SMART capabilities: (0x0003) Saves SMART data before entering
  23. power-saving mode.
  24. Supports SMART auto save timer.
  25. Error logging capability: (0x01) Error logging supported.
  26. General Purpose Logging supported.
  27. Short self-test routine
  28. recommended polling time: ( 1) minutes.
  29. Extended self-test routine
  30. recommended polling time: ( 249) minutes.
  31. SCT capabilities: (0x003d) SCT Status supported.
  32. SCT Error Recovery Control supported.
  33. SCT Feature Control supported.
  34. SCT Data Table supported.
  35.  
  36. SMART Attributes Data Structure revision number: 16
  37. Vendor Specific SMART Attributes with Thresholds:
  38. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  39. 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
  40. 2 Throughput_Performance 0x0005 140 140 054 Pre-fail Offline - 68
  41. 3 Spin_Up_Time 0x0007 135 135 024 Pre-fail Always - 271 (Average 288)
  42. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 31
  43. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
  44. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  45. 8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
  46. 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 73
  47. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  48. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 31
  49. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 34
  50. 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 34
  51. 194 Temperature_Celsius 0x0002 166 166 000 Old_age Always - 36 (Min/Max 19/40)
  52. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  53. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  54. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  55. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 17707
  56.  
  57. SMART Error Log Version: 1
  58. ATA Error Count: 17707 (device log contains only the most recent five errors)
  59. CR = Command Register [HEX]
  60. FR = Features Register [HEX]
  61. SC = Sector Count Register [HEX]
  62. SN = Sector Number Register [HEX]
  63. CL = Cylinder Low Register [HEX]
  64. CH = Cylinder High Register [HEX]
  65. DH = Device/Head Register [HEX]
  66. DC = Device Command Register [HEX]
  67. ER = Error register [HEX]
  68. ST = Status register [HEX]
  69. Powered_Up_Time is measured from power on, and printed as
  70. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  71. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  72.  
  73. Error 17707 occurred at disk power-on lifetime: 56 hours (2 days + 8 hours)
  74. When the command that caused the error occurred, the device was active or idle.
  75.  
  76. After command completion occurred, registers were:
  77. ER ST SC SN CL CH DH
  78. -- -- -- -- -- -- --
  79. 84 51 70 90 6f 69 08 Error: ICRC, ABRT 112 sectors at LBA = 0x08696f90 = 141127568
  80.  
  81. Commands leading to the command that caused the error were:
  82. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  83. -- -- -- -- -- -- -- -- ---------------- --------------------
  84. 35 00 00 00 6d 69 e0 08 00:25:01.112 WRITE DMA EXT
  85. 35 00 00 00 69 69 e0 08 00:25:01.110 WRITE DMA EXT
  86. 35 00 00 00 65 69 e0 08 00:25:01.107 WRITE DMA EXT
  87. 35 00 00 00 61 69 e0 08 00:25:01.105 WRITE DMA EXT
  88. 35 00 00 00 5d 69 e0 08 00:25:01.103 WRITE DMA EXT
  89.  
  90. Error 17706 occurred at disk power-on lifetime: 56 hours (2 days + 8 hours)
  91. When the command that caused the error occurred, the device was active or idle.
  92.  
  93. After command completion occurred, registers were:
  94. ER ST SC SN CL CH DH
  95. -- -- -- -- -- -- --
  96. 84 51 20 60 7a b6 07 Error: ICRC, ABRT 32 sectors at LBA = 0x07b67a60 = 129399392
  97.  
  98. Commands leading to the command that caused the error were:
  99. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  100. -- -- -- -- -- -- -- -- ---------------- --------------------
  101. 35 00 00 80 77 b6 e0 08 00:24:59.882 WRITE DMA EXT
  102. 35 00 00 80 73 b6 e0 08 00:24:59.880 WRITE DMA EXT
  103. 25 00 08 80 73 b6 e0 08 00:24:59.879 READ DMA EXT
  104. 25 00 00 80 bf b6 e0 08 00:24:59.874 READ DMA EXT
  105. 25 00 00 80 bb b6 e0 08 00:24:59.869 READ DMA EXT
  106.  
  107. Error 17705 occurred at disk power-on lifetime: 56 hours (2 days + 8 hours)
  108. When the command that caused the error occurred, the device was active or idle.
  109.  
  110. After command completion occurred, registers were:
  111. ER ST SC SN CL CH DH
  112. -- -- -- -- -- -- --
  113. 84 51 c0 f0 23 7b 07 Error: ICRC, ABRT 192 sectors at LBA = 0x077b23f0 = 125510640
  114.  
  115. Commands leading to the command that caused the error were:
  116. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  117. -- -- -- -- -- -- -- -- ---------------- --------------------
  118. 35 00 00 b0 21 7b e0 08 00:24:59.490 WRITE DMA EXT
  119. 35 00 00 b0 1d 7b e0 08 00:24:59.488 WRITE DMA EXT
  120. 35 00 00 b0 19 7b e0 08 00:24:59.486 WRITE DMA EXT
  121. 35 00 00 b0 15 7b e0 08 00:24:59.483 WRITE DMA EXT
  122. 35 00 00 b0 11 7b e0 08 00:24:59.481 WRITE DMA EXT
  123.  
  124. Error 17704 occurred at disk power-on lifetime: 56 hours (2 days + 8 hours)
  125. When the command that caused the error occurred, the device was active or idle.
  126.  
  127. After command completion occurred, registers were:
  128. ER ST SC SN CL CH DH
  129. -- -- -- -- -- -- --
  130. 84 51 20 90 d8 7a 07 Error: ICRC, ABRT 32 sectors at LBA = 0x077ad890 = 125491344
  131.  
  132. Commands leading to the command that caused the error were:
  133. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  134. -- -- -- -- -- -- -- -- ---------------- --------------------
  135. 35 00 00 b0 d5 7a e0 08 00:24:59.252 WRITE DMA EXT
  136. 25 00 08 b0 d5 7a e0 08 00:24:59.251 READ DMA EXT
  137. 25 00 00 b0 21 7b e0 08 00:24:59.247 READ DMA EXT
  138. 25 00 00 b0 1d 7b e0 08 00:24:59.241 READ DMA EXT
  139. 25 00 00 b0 19 7b e0 08 00:24:59.236 READ DMA EXT
  140.  
  141. Error 17703 occurred at disk power-on lifetime: 56 hours (2 days + 8 hours)
  142. When the command that caused the error occurred, the device was active or idle.
  143.  
  144. After command completion occurred, registers were:
  145. ER ST SC SN CL CH DH
  146. -- -- -- -- -- -- --
  147. 84 51 e0 a0 03 51 06 Error: ICRC, ABRT 224 sectors at LBA = 0x065103a0 = 105972640
  148.  
  149. Commands leading to the command that caused the error were:
  150. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  151. -- -- -- -- -- -- -- -- ---------------- --------------------
  152. 35 00 00 80 00 51 e0 08 00:24:57.131 WRITE DMA EXT
  153. 35 00 00 80 fc 50 e0 08 00:24:57.129 WRITE DMA EXT
  154. 35 00 00 80 f8 50 e0 08 00:24:57.127 WRITE DMA EXT
  155. 35 00 00 80 f4 50 e0 08 00:24:57.125 WRITE DMA EXT
  156. 35 00 00 80 f0 50 e0 08 00:24:57.123 WRITE DMA EXT
  157.  
  158. SMART Self-test log structure revision number 1
  159. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  160. # 1 Extended offline Completed without error 00% 61 -
  161. # 2 Short offline Completed without error 00% 57 -
  162. # 3 Extended offline Aborted by host 60% 57 -
  163. # 4 Extended offline Interrupted (host reset) 90% 55 -
  164. # 5 Extended offline Aborted by host 90% 55 -
  165. # 6 Short offline Interrupted (host reset) 90% 26 -
  166.  
  167. SMART Selective self-test log data structure revision number 1
  168. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  169. 1 0 0 Not_testing
  170. 2 0 0 Not_testing
  171. 3 0 0 Not_testing
  172. 4 0 0 Not_testing
  173. 5 0 0 Not_testing
  174. Selective self-test flags (0x0):
  175. After scanning selected spans, do NOT read-scan remainder of disk.
  176. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!