API tools faq
paste
Advertisement
Guest User

Untitled

a guest
May 29th, 2016
133
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.02 KB | None | 0 0
raw download clone embed print report
  1. ¦¦¦HELLO! BOOT0 is starting!
  2. boot0 version : 4.0.0
  3. fel_flag = 0x00000000
  4. rtc[0] value = 0x00000000
  5. rtc[1] value = 0x00000000
  6. rtc[2] value = 0x00000000
  7. rtc[3] value = 0x00000000
  8. rtc[4] value = 0x00000000
  9. rtc[5] value = 0x00000000
  10. rtc[6] value = 0x00000000
  11. rtc[7] value = 0x00000000
  12. DRAM DRIVE INFO: V0.8
  13. DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  14. DRAM CLK = 672 MHz
  15. DRAM zq value: 003b3bfb
  16. READ DQS LCDL = 00202020
  17. DRAM SIZE =512 M
  18. odt delay
  19. dram size =512
  20. card boot number = 0
  21. card no is 0
  22. sdcard 0 line count 4
  23. [mmc]: mmc driver ver 2014-12-10 21:20:39
  24. [mmc]: ***Try SD card 0***
  25. [mmc]: SD/MMC Card: 4bit, capacity: 60906MB
  26. [mmc]: vendor: Man 00035344 Snr 00121b8f
  27. [mmc]: product: SL64G
  28. [mmc]: revision: 8.0
  29. [mmc]: ***SD/MMC 0 init OK!!!***
  30. sdcard 0 init ok
  31. The size of uboot is 000dc000.
  32. sum=ede66ee7
  33. src_sum=ede66ee7
  34. Succeed in loading uboot from sdmmc flash.
  35. Ready to disable icache.
  36. Jump to secend Boot.
  37. SUNXI_NORMAL_MODE
  38. [ 0.375]e mode
  39.  
  40. U-Boot 2011.09-rc1 (Jun 21 2015 - 19:33:17) Allwinner Technology
  41.  
  42. [ 0.383]version: 1.1.0
  43. normal mode
  44. [ 0.390]pmbus: ready
  45. not set main pmu id
  46. axp_probe error
  47. sunxi_set_cpux_voltage_by_i2c error
  48. [ 0.408]PMU: pll1 1200 Mhz,PLL6=600 Mhz
  49. AXI=400 Mhz,AHB=200 Mhz, APB1=100 Mhz
  50. sid read already
  51. fel key new mode
  52. run key detect
  53. no key found
  54. no key input
  55. dram_para_set start
  56. dram_para_set end
  57. normal mode
  58. [ 0.438]DRAM: 512 MiB
  59. relocation Offset is: 15af9000
  60. [box standby] read rtc = 0x0
  61. [box_start_os] mag be start_type no use
  62. user_gpio config
  63. user_gpio ok
  64. gic: normal or no secure os mode
  65. workmode = 0
  66. MMC: 0
  67. [ 0.512][mmc]: mmc driver ver 2014-12-10 9:23:00
  68. [ 0.517][mmc]: get sdc_phy_wipe fail.
  69. [ 0.521][mmc]: get sdc0 sdc_erase fail.
  70. [ 0.525][mmc]: get sdc_f_max fail,use default 50000000Hz
  71. [ 0.530][mmc]: get sdc_ex_dly_used fail,use default dly
  72. [ 0.536][mmc]: SUNXI SD/MMC: 0
  73. [ 0.549][mmc]: *Try SD card 0*
  74. [ 0.596][mmc]: CID 0x3534453 0x4c363447 0x8000121b 0x8f00f14f
  75. [ 0.601][mmc]: mmc clk 50000000
  76. [ 0.605][mmc]: SD/MMC Card: 4bit, capacity: 60906MB
  77. [ 0.610][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
  78. [ 0.615][mmc]: ***SD/MMC 0 init OK!!!***
  79. [ 0.621][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
  80. [ 0.626][mmc]: secure_feature 0x0
  81. [ 0.630][mmc]: secure_removal_type 0x0
  82. [ 0.634]sunxi flash init ok
  83. script config pll_de to 864 Mhz
  84. Not Found clk pll_video1 in script
  85. script config pll_video to 297 Mhz
  86. [boot]disp_init_tv
  87. [DISP_TV] disp_init_tv enter g_tv_used
  88. screen 0 do not support TV TYPE!
  89. [BOOOT_DISP_TV] disp tv device_registered
  90. unable to find regulator vcc-hdmi-18 from [pmu1_regu] or [pmu2_regu]
  91. enable power vcc-hdmi-18, ret=-1
  92. DRV_DISP_Init end
  93. boot_disp.auto_hpd=1
  94. auto hpd check has 100 times!
  95. auto check no any connected, the output_type is 4
  96. [disk_read_fs] no the partition
  97. error: open disp_rsl.fex, maybe it is not exist
  98. not support this mode[4], use inline mode[4]
  99. attched ok, mgr0<-->device0, type=4, mode=4----
  100. ready to set mode
  101. [ 2.014]finally, output_type=0x4, output_mode=0x4, screen_id=0x0, disp_para=0x0
  102. fail to find part named env
  103. Using default environment
  104.  
  105. In: serial
  106. Out: serial
  107. Err: serial
  108. --------fastboot partitions--------
  109. mbr not exist
  110. base bootcmd=run setargs_mmc boot_normal
  111. bootcmd set setargs_mmc
  112. key 0
  113. cant find rcvy value
  114. cant find fstbt value
  115. no misc partition is found
  116. to be run cmd=run setargs_mmc boot_normal
  117. [ 2.051][mmc]: MMC Device 2 not found
  118. [ 2.055][mmc]: Can not find mmc dev
  119. [ 2.058][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1849
  120. sunxi_secstorage_read fail
  121. get secure storage map err
  122. the private part isn't exist
  123. WORK_MODE_BOOT
  124. adver not need show
  125. sunxi_bmp_logo_display
  126. [disk_read_fs] no the partition
  127. error: open bootlogo.bmp, maybe it is not exist
  128. sunxi bmp info error : unable to open logo file bootlogo.bmp
  129. [ 2.091]Hit any key to stop autoboot: 0
  130. ## Booting kernel from Legacy Image at 40007800 ...
  131. Image Name: Linux-3.4.39
  132. Image Type: ARM Linux Kernel Image (uncompressed)
  133. Data Size: 5039448 Bytes = 4.8 MiB
  134. Load Address: 40008000
  135. Entry Point: 40008000
  136. Verifying Checksum ... OK
  137. Loading Kernel Image ... OK
  138. OK
  139. [ 5.674][mmc]: MMC Device 2 not found
  140. [ 5.678][mmc]: mmc not find,so not exit
  141. [ 5.682]
  142. Starting kernel ...
  143.  
  144. [sun8i_fixup]: From boot, get meminfo:
  145. Start: 0x40000000
  146. Size: 512MB
  147. ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1
  148. ion_reserve_common: ion reserve: [0x56000000, 0x60000000]!
  149. [ 0.000000] Booting Linux on physical CPU 0
  150. [ 0.000000] Initializing cgroup subsys cpu
  151. [ 0.000000] Linux version 3.4.39 (allwinner@steven) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #41 SMP PREEMPT Sun Jun 21 13:09:26 HKT 2015
  152. [ 0.000000] Ignoring tag cmdline (using the default kernel command line)
  153. [ 0.000000] bootconsole [earlycon0] enabled
  154. [ 0.000000] cma: CMA: reserved 160 MiB at 56000000
  155. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  156. [ 0.000000] On node 0 totalpages: 131072
  157. [ 0.000000] free_area_init_node: node 0, pgdat c0a6d6c0, node_mem_map c0b49000
  158. [ 0.000000] Normal zone: 1152 pages used for memmap
  159. [ 0.000000] Normal zone: 0 pages reserved
  160. [ 0.000000] Normal zone: 129920 pages, LIFO batch:31
  161. [ 0.000000] script_init enter!
  162. [ 0.000000] script_init exit!
  163. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0fdb000 s11840 r8192 d12736 u32768
  164. [ 0.000000] pcpu-alloc: s11840 r8192 d12736 u32768 alloc=8*4096
  165. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  166. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920
  167. [ 0.000000] Kernel command line: earlyprintk=ttyS0,115200 loglevel=8 console=ttyS0,115200 console=tty0 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
  168. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  169. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  170. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  171. [ 0.000000] Memory: 512MB = 512MB total
  172. [ 0.000000] Memory: 343104k/343104k available, 181184k reserved, 0K highmem
  173. [ 0.000000] Virtual kernel memory layout:
  174. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  175. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  176. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  177. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  178. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  179. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  180. [ 0.000000] .text : 0xc0008000 - 0xc099e7e4 (9818 kB)
  181. [ 0.000000] .init : 0xc099f000 - 0xc09f1e40 ( 332 kB)
  182. [ 0.000000] .data : 0xc09f2000 - 0xc0a70138 ( 505 kB)
  183. [ 0.000000] .bss : 0xc0a708ec - 0xc0b489b8 ( 865 kB)
  184. [ 0.000000] Preemptible hierarchical RCU implementation.
  185. [ 0.000000] Additional per-CPU info printed with stalls.
  186. [ 0.000000] NR_IRQS:544
  187. [ 0.000000] Architected local timer running at 24.00MHz.
  188. [ 0.000000] Switching to timer-based delay loop
  189. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  190. [ 0.000000] Console: colour dummy device 80x30
  191. [ 0.000000] console [tty0] enabled, bootconsole disabled
  192. [ 0.000000] Booting Linux on physical CPU 0
  193. [ 0.000000] Initializing cgroup subsys cpu
  194. [ 0.000000] Linux version 3.4.39 (allwinner@steven) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #41 SMP PREEMPT Sun Jun 21 13:09:26 HKT 2015
  195. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  196. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  197. [ 0.000000] Machine: sun8i
  198. [ 0.000000] Ignoring tag cmdline (using the default kernel command line)
  199. [ 0.000000] bootconsole [earlycon0] enabled
  200. [ 0.000000] cma: CMA: reserved 160 MiB at 56000000
  201. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  202. [ 0.000000] On node 0 totalpages: 131072
  203. [ 0.000000] free_area_init_node: node 0, pgdat c0a6d6c0, node_mem_map c0b49000
  204. [ 0.000000] Normal zone: 1152 pages used for memmap
  205. [ 0.000000] Normal zone: 0 pages reserved
  206. [ 0.000000] Normal zone: 129920 pages, LIFO batch:31
  207. [ 0.000000] script_init enter!
  208. [ 0.000000] script_init exit!
  209. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0fdb000 s11840 r8192 d12736 u32768
  210. [ 0.000000] pcpu-alloc: s11840 r8192 d12736 u32768 alloc=8*4096
  211. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  212. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920
  213. [ 0.000000] Kernel command line: earlyprintk=ttyS0,115200 loglevel=8 console=ttyS0,115200 console=tty0 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
  214. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  215. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  216. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  217. [ 0.000000] Memory: 512MB = 512MB total
  218. [ 0.000000] Memory: 343104k/343104k available, 181184k reserved, 0K highmem
  219. [ 0.000000] Virtual kernel memory layout:
  220. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  221. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  222. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  223. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  224. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  225. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  226. [ 0.000000] .text : 0xc0008000 - 0xc099e7e4 (9818 kB)
  227. [ 0.000000] .init : 0xc099f000 - 0xc09f1e40 ( 332 kB)
  228. [ 0.000000] .data : 0xc09f2000 - 0xc0a70138 ( 505 kB)
  229. [ 0.000000] .bss : 0xc0a708ec - 0xc0b489b8 ( 865 kB)
  230. [ 0.000000] Preemptible hierarchical RCU implementation.
  231. [ 0.000000] Additional per-CPU info printed with stalls.
  232. [ 0.000000] NR_IRQS:544
  233. [ 0.000000] Architected local timer running at 24.00MHz.
  234. [ 0.000000] Switching to timer-based delay loop
  235. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  236. [ 0.000000] Console: colour dummy device 80x30
  237. [ 0.000000] console [tty0] enabled, bootconsole disabled
  238. [ 0.019904] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
  239. [ 0.019958] pid_max: default: 32768 minimum: 301
  240. [ 0.020222] Mount-cache hash table entries: 512
  241. [ 0.021090] Initializing cgroup subsys cpuacct
  242. [ 0.021118] Initializing cgroup subsys freezer
  243. [ 0.021164] CPU: Testing write buffer coherency: ok
  244. [ 0.021226] ftrace: allocating 25659 entries in 76 pages
  245. [ 0.050250] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  246. [ 0.050284] [sunxi_smp_prepare_cpus] enter
  247. [ 0.050322] Setting up static identity map for 0x406b9730 - 0x406b9788
  248. [ 0.051149] CPU1: Booted secondary processor
  249. [ 0.051149] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  250. [ 0.051282] CPU2: Booted secondary processor
  251. [ 0.051282] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  252. [ 0.051282] CPU3: Booted secondary processor
  253. [ 0.051282] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  254. [ 0.060169] Brought up 4 CPUs
  255. [ 0.060252] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
  256. [ 0.060823] devtmpfs: initialized
  257. [ 0.063283] wakeup src cnt is : 1.
  258. [ 0.063303] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
  259. [ 0.063327] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0
  260. [ 0.063351] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
  261. [ 0.063376] sunxi pm init
  262. [ 0.063505] pinctrl core: initialized pinctrl subsystem
  263. [ 0.070893] NET: Registered protocol family 16
  264. [ 0.071592] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  265. [ 0.071592] script_sysfs_init success
  266. [ 0.071592] sunxi_dump_init success
  267. [ 0.072146] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
  268. [ 0.072146] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  269. [ 0.072146] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  270. [ 0.072146] hw-breakpoint: maximum watchpoint size is 8 bytes.
  271. [ 0.072146] script config pll_video to 297 Mhz
  272. [ 0.072146] script config pll_de to 864 Mhz
  273. [ 0.072146] script config pll_ve to 402 Mhz
  274. [ 0.072146] sunxi_default_clk_init
  275. [ 0.072146] try to set pll6ahb1 to 200000000
  276. [ 0.072146] try to set ahb clk source to pll6ahb1
  277. [ 0.072146] set ahb clk source to pll6ahb1
  278. [ 0.072146] try to set ahb1 to 200000000
  279. [ 0.072146] try to set apb1 to 100000000
  280. [ 0.072383] ===fe3o4==== sunxi_root_procfs_attach ret:0
  281. [ 0.080214] bio: create slab <bio-0> at 0
  282. [ 0.080364] [ARISC] :sunxi-arisc driver v1.04
  283. [ 0.091910] [ARISC] :arisc version: [v0.1.34]
  284. [ 0.170444] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
  285. [ 0.171835] SCSI subsystem initialized
  286. [ 0.171835] usbcore: registered new interface driver usbfs
  287. <6>[ 0.171835] usbcore: registered new interface driver hub
  288. [ 0.180040] usbcore: registered new device driver usb
  289. [ 0.180150] twi_chan_cfg()335 - [twi0] has no twi_regulator.
  290. [ 0.180174] twi_chan_cfg()335 - [twi1] has no twi_regulator.
  291. [ 0.180197] twi_chan_cfg()335 - [twi2] has no twi_regulator.
  292. [ 0.180516] Linux video capture interface: v2.00
  293. [ 0.180692] Advanced Linux Sound Architecture Driver Version 1.0.25.
  294. [ 0.181160] Bluetooth: Core ver 2.16
  295. [ 0.181206] NET: Registered protocol family 31
  296. [ 0.181227] Bluetooth: HCI device and connection manager initialized
  297. [ 0.181252] Bluetooth: HCI socket layer initialized
  298. [ 0.181272] Bluetooth: L2CAP socket layer initialized
  299. [ 0.181312] Bluetooth: SCO socket layer initialized
  300. [ 0.181523] cfg80211: Calling CRDA to update world regulatory domain
  301. [ 0.181603] Switching to clocksource arch_sys_counter
  302. [ 0.192067] FS-Cache: Loaded
  303. [ 0.192342] CacheFiles: Loaded
  304. [ 0.202259] NET: Registered protocol family 2
  305. [ 0.202517] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  306. [ 0.203000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  307. [ 0.203244] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
  308. [ 0.203460] TCP: Hash tables configured (established 16384 bind 16384)
  309. [ 0.203484] TCP: reno registered
  310. [ 0.203503] UDP hash table entries: 256 (order: 1, 8192 bytes)
  311. [ 0.203537] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  312. [ 0.203795] NET: Registered protocol family 1
  313. [ 0.204121] RPC: Registered named UNIX socket transport module.
  314. [ 0.204147] RPC: Registered udp transport module.
  315. [ 0.204166] RPC: Registered tcp transport module.
  316. [ 0.204184] RPC: Registered tcp NFSv4.1 backchannel transport module.
  317. [ 0.204635] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
  318. [ 0.204749] sunxi_reg_init enter
  319. [ 0.205369] audit: initializing netlink socket (disabled)
  320. [ 0.205420] type=2000 audit(0.200:1): initialized
  321. [ 0.207352] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  322. [ 0.208016] NTFS driver 2.1.30 [Flags: R/W].
  323. [ 0.208133] fuse init (API version 7.18)
  324. [ 0.208812] Btrfs loaded
  325. [ 0.208845] msgmni has been set to 990
  326. [ 0.209818] io scheduler noop registered
  327. [ 0.209842] io scheduler deadline registered (default)
  328. [ 0.209927] io scheduler cfq registered
  329. [ 0.210364] [DISP]disp_module_init
  330. [ 0.210649] cmdline,disp=
  331. [ 0.217000] [DISP] Fb_map_kernel_logo,line:925:Fb_map_kernel_logo failed!
  332. [ 0.229759] Console: switching to colour frame buffer device 160x45
  333. [ 0.242655] [DISP]disp_module_init finish
  334. [ 0.242937] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
  335. [ 0.243348] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  336. [ 0.243491] sw_uart_pm()890 - uart0 clk is already enable
  337. [ 0.243622] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
  338. [ 0.435597] console [ttyS0] enabled
  339. [ 0.570669] sunxi_cmatest_init enter
  340. [ 0.750070] sunxi_cmatest_init success
  341. [ 0.753755] loop: module loaded
  342. [ 0.869903] sunxi_spi_chan_cfg()1355 - [spi-0] has no spi_regulator.
  343. [ 1.028615] sunxi_spi_chan_cfg()1355 - [spi-1] has no spi_regulator.
  344. [ 1.176388] tun: Universal TUN/TAP device driver, 1.6
  345. [ 1.474891] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  346. [ 1.551729] can't get item for emac_power gpio !
  347. [ 1.560755] PPP generic driver version 2.4.2
  348. [ 1.569011] PPP BSD Compression module registered
  349. [ 1.577580] PPP Deflate Compression module registered
  350. [ 1.587228] PPP MPPE Compression module registered
  351. [ 1.595881] NET: Registered protocol family 24
  352. [ 1.604118] PPTP driver version 0.8.5
  353. [ 1.611617] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!