Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- BusyBox v1.25.1 () built-in shell (ash)
- _________
- / /\ _ ___ ___ ___
- / LE / \ | | | __| \| __|
- / DE / \ | |__| _|| |) | _|
- /________/ LE \ |____|___|___/|___| lede-project.org
- \ \ DE /
- \ LE \ / -----------------------------------------------------------
- \ DE \ / Reboot (SNAPSHOT, r2675-4af4f21)
- \________\/ -----------------------------------------------------------
- root@lede:~# lspci -vv
- 00:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac Wireless Network Adapter
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 40
- Region 0: Memory at 10000000 (64-bit, non-prefetchable) [size=2097153]
- Region 2: Memory at <unassigned> (32-bit, non-prefetchable) [size=2]
- Region 3: Memory at <unassigned> (32-bit, non-prefetchable) [size=2]
- Region 4: Memory at <unassigned> (32-bit, non-prefetchable) [size=2]
- Region 5: Memory at <unassigned> (32-bit, non-prefetchable) [size=2]
- [virtual] Expansion ROM at 10200000 [disabled] [size=65537]
- Capabilities: [40] Power Management version 2
- Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit-
- Address: 00000000 Data: 0000
- Masking: 00000000 Pending: 00000000
- Capabilities: [70] Express (v2) Endpoint, MSI 00
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
- ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 512 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <64us
- ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
- Compliance De-emphasis: -6dB
- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
- Capabilities: [100 v1] Advanced Error Reporting
- UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
- AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
- Capabilities: [140 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- Status: NegoPending- InProgress-
- Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
- Kernel driver in use: ath10k_pci
- lspci: Unable to load libkmod resources: error -12
- root@lede:~# dmesg
- [ 0.000000] Linux version 4.4.39 (buildbot@buildslave) (gcc version 5.4.0 (LEDE GCC 5.4.0 r2473-b305b8c) ) #0 Fri Dec 23 18:24:14 2016
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
- [ 0.000000] SoC: Atheros AR9344 rev 2
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 08000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] No valid device tree found, continuing without
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] On node 0 totalpages: 32768
- [ 0.000000] free_area_init_node: node 0, pgdat 804864d0, node_mem_map 81000000
- [ 0.000000] Normal zone: 256 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- [ 0.000000] Kernel command line: board=R6100 console=ttyS0,115200 mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata)ro,256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter) rootfstype=squashfs noinitrd
- [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Writing ErrCtl register=00000000
- [ 0.000000] Readback ErrCtl register=00000000
- [ 0.000000] Memory: 124624K/131072K available (3385K kernel code, 163K rwdata, 828K rodata, 288K init, 204K bss, 6448K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS:51
- [ 0.000000] Clocks: CPU:560.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz
- [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
- [ 0.000009] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
- [ 0.008303] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
- [ 0.081136] pid_max: default: 32768 minimum: 301
- [ 0.086175] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.093230] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.103340] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.115085] NET: Registered protocol family 16
- [ 0.121291] MIPS: machine is NETGEAR R6100
- [ 0.125957] ar71xx: using random MAC address for eth0
- [ 0.346002] ar71xx: using random MAC address for eth1
- [ 0.570450] registering PCI controller with io_map_base unset
- [ 0.586995] PCI host bridge to bus 0000:00
- [ 0.591371] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
- [ 0.598723] pci_bus 0000:00: root bus resource [io 0x0000]
- [ 0.604651] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
- [ 0.611885] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 0.620358] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
- [ 0.620390] pci 0000:00:00.0: invalid calibration data
- [ 0.625893] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
- [ 0.625953] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 0.626024] pci 0000:00:00.0: supports D1 D2
- [ 0.626251] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
- [ 0.626287] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit]
- [ 0.634085] pci 0000:00:00.0: BAR 6: assigned [mem 0x10200000-0x1020ffff pref]
- [ 0.641809] pci 0000:00:00.0: using irq 40 for pin 1
- [ 0.648028] clocksource: Switched to clocksource MIPS
- [ 0.654720] NET: Registered protocol family 2
- [ 0.660319] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.667750] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.674575] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.681432] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.687661] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.694657] NET: Registered protocol family 1
- [ 0.699419] PCI: CLS 0 bytes, default 32
- [ 0.704360] futex hash table entries: 256 (order: -1, 3072 bytes)
- [ 0.711015] Crashlog allocated RAM at address 0x3f00000
- [ 0.731627] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.737845] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.751731] io scheduler noop registered
- [ 0.755912] io scheduler deadline registered (default)
- [ 0.761707] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
- [ 0.771246] console [ttyS0] disabled
- [ 0.795134] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
- [ 0.804326] console [ttyS0] enabled
- [ 0.811753] bootconsole [early0] disabled
- [ 0.825877] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xf1
- [ 0.832378] nand: Micron NAND 128MiB 3,3V 8-bit
- [ 0.836975] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
- [ 0.844709] Scanning device for bad blocks
- [ 0.932047] 10 cmdlinepart partitions found on MTD device ar934x-nfc
- [ 0.938517] Creating 10 MTD partitions on "ar934x-nfc":
- [ 0.943826] 0x000000000000-0x000000020000 : "u-boot"
- [ 0.950363] 0x000000020000-0x000000060000 : "caldata"
- [ 0.957154] 0x000000060000-0x0000000a0000 : "caldata-backup"
- [ 0.964612] 0x0000000a0000-0x000000120000 : "config"
- [ 0.971342] 0x000000120000-0x0000001a0000 : "pot"
- [ 0.977811] 0x0000001a0000-0x0000003a0000 : "kernel"
- [ 0.984605] 0x0000003a0000-0x000007b00000 : "ubi"
- [ 0.991360] 0x0000001a0000-0x000001aa0000 : "firmware"
- [ 1.353546] 0x000001aa0000-0x000001ca0000 : "language"
- [ 1.360205] 0x000001ca0000-0x000001fa0000 : "traffic_meter"
- [ 1.377516] libphy: ag71xx_mdio: probed
- [ 1.969945] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
- [ 1.979924] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
- [ 2.569898] ag71xx-mdio.1: Found an AR934X built-in switch
- [ 2.612179] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
- [ 2.620797] NET: Registered protocol family 10
- [ 2.630167] NET: Registered protocol family 17
- [ 2.634755] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
- [ 2.647729] 8021q: 802.1Q VLAN Support v1.8
- [ 2.655867] UBI: auto-attach mtd6
- [ 2.659116] ubi0: attaching mtd6
- [ 2.894859] random: nonblocking pool is initialized
- [ 4.162542] ubi0: scanning is finished
- [ 4.183970] ubi0: attached mtd6 (name "ubi", size 119 MiB)
- [ 4.189594] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 4.196567] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 4.203462] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 4.210533] ubi0: good PEBs: 955, bad PEBs: 0, corrupted PEBs: 0
- [ 4.216621] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
- [ 4.223957] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1901612439
- [ 4.233229] ubi0: available PEBs: 0, total reserved PEBs: 955, PEBs reserved for bad PEB handling: 20
- [ 4.242629] ubi0: background thread "ubi_bgt0d" started, PID 310
- [ 4.250549] block ubiblock0_0: created from ubi0:0(rootfs)
- [ 4.256128] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
- [ 4.263290] hctosys: unable to open rtc device (rtc0)
- [ 4.275996] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
- [ 4.284728] Freeing unused kernel memory: 288K (804a8000 - 804f0000)
- [ 5.342579] init: Console is alive
- [ 5.346268] init: - watchdog -
- [ 6.320184] usbcore: registered new interface driver usbfs
- [ 6.325847] usbcore: registered new interface driver hub
- [ 6.331397] usbcore: registered new device driver usb
- [ 6.342366] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 6.350704] ehci-platform: EHCI generic platform driver
- [ 6.356109] ehci-platform ehci-platform: EHCI Host Controller
- [ 6.362032] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
- [ 6.372173] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
- [ 6.398073] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
- [ 6.405386] hub 1-0:1.0: USB hub found
- [ 6.409598] hub 1-0:1.0: 1 port detected
- [ 6.416835] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 6.424676] ohci-platform: OHCI generic platform driver
- [ 6.440742] init: - preinit -
- [ 6.823833] usb 1-1: new high-speed USB device number 2 using ehci-platform
- [ 6.982696] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 9.127977] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 398
- [ 9.247331] UBIFS (ubi0:1): recovery needed
- [ 9.465150] UBIFS (ubi0:1): recovery completed
- [ 9.469777] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
- [ 9.477723] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
- [ 9.487811] UBIFS (ubi0:1): FS size: 114659328 bytes (109 MiB, 903 LEBs), journal size 5713920 bytes (5 MiB, 45 LEBs)
- [ 9.498581] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
- [ 9.505300] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 49919939-36FB-4CF5-933F-FC53A6B70EA4, small LPT model
- [ 9.533239] mount_root: switching to ubifs overlay
- [ 9.551825] urandom-seed: Seeding with /etc/urandom.seed
- [ 9.782081] procd: - early -
- [ 9.785117] procd: - watchdog -
- [ 10.374628] procd: - ubus -
- [ 10.436508] procd: - init -
- [ 10.999259] exFAT: Version 1.2.9
- [ 11.007669] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 11.026932] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
- [ 11.034684] Backport generated by backports.git backports-20160324-9-g0e38f5c
- [ 11.200458] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
- [ 11.206374] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
- [ 11.425727] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
- [ 11.436625] ath10k_pci 0000:00:00.0: Falling back to user helper
- [ 11.540911] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
- [ 11.558976] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-5.bin failed with error -2
- [ 11.569879] ath10k_pci 0000:00:00.0: Falling back to user helper
- [ 11.763807] firmware ath10k!QCA988X!hw2.0!firmware-5.bin: firmware_loading_store: map pages failed
- [ 11.773133] ath10k_pci 0000:00:00.0: could not fetch firmware file 'ath10k/QCA988X/hw2.0/firmware-5.bin': -11
- [ 11.783332] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-4.bin failed with error -2
- [ 11.794211] ath10k_pci 0000:00:00.0: Falling back to user helper
- [ 11.994080] firmware ath10k!QCA988X!hw2.0!firmware-4.bin: firmware_loading_store: map pages failed
- [ 12.003431] ath10k_pci 0000:00:00.0: could not fetch firmware file 'ath10k/QCA988X/hw2.0/firmware-4.bin': -11
- [ 12.013642] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-3.bin failed with error -2
- [ 12.024518] ath10k_pci 0000:00:00.0: Falling back to user helper
- [ 12.224527] firmware ath10k!QCA988X!hw2.0!firmware-3.bin: firmware_loading_store: map pages failed
- [ 12.233879] ath10k_pci 0000:00:00.0: could not fetch firmware file 'ath10k/QCA988X/hw2.0/firmware-3.bin': -11
- [ 12.342030] ath10k_pci 0000:00:00.0: Unknown FW IE: 30
- [ 12.347269] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
- [ 12.356682] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
- [ 12.370210] ath10k_pci 0000:00:00.0: firmware ver 10.1.467-ct-_fW-018-a857715 api 2 features wmi-10.x,has-wmi-mgmt-tx crc32 e76ac366
- [ 12.382450] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
- [ 12.393065] ath10k_pci 0000:00:00.0: Falling back to user helper
- [ 12.513723] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
- [ 12.526254] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
- [ 13.464202] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
- [ 13.572188] ath: EEPROM regdomain: 0x0
- [ 13.572207] ath: EEPROM indicates default country code should be used
- [ 13.572217] ath: doing EEPROM country->regdmn map search
- [ 13.572239] ath: country maps to regdmn code: 0x3a
- [ 13.572251] ath: Country alpha2 being used: US
- [ 13.572260] ath: Regpair used: 0x3a
- [ 13.642303] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 13.659720] nf_conntrack version 0.5.0 (1951 buckets, 7804 max)
- [ 13.815546] xt_time: kernel timezone is -0000
- [ 13.972790] usbcore: registered new interface driver ath9k_htc
- [ 13.992419] PPP generic driver version 2.4.2
- [ 13.999621] NET: Registered protocol family 24
- [ 14.023448] ath: EEPROM regdomain: 0x0
- [ 14.023470] ath: EEPROM indicates default country code should be used
- [ 14.023479] ath: doing EEPROM country->regdmn map search
- [ 14.023501] ath: country maps to regdmn code: 0x3a
- [ 14.023513] ath: Country alpha2 being used: US
- [ 14.023523] ath: Regpair used: 0x3a
- [ 14.036007] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- [ 14.041261] ieee80211 phy1: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47
- [ 21.317330] device eth1 entered promiscuous mode
- [ 21.339278] br-lan: port 1(eth1) entered forwarding state
- [ 21.344803] br-lan: port 1(eth1) entered forwarding state
- [ 21.388012] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 22.268167] br-lan: port 1(eth1) entered disabled state
- [ 22.954370] eth1: link up (1000Mbps/Full duplex)
- [ 22.977169] br-lan: port 1(eth1) entered forwarding state
- [ 22.982747] br-lan: port 1(eth1) entered forwarding state
- [ 23.070390] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
- [ 24.978050] br-lan: port 1(eth1) entered forwarding state
- [ 25.484711] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 25.525800] device wlan0 entered promiscuous mode
- [ 26.302034] wlan1: authenticate with 38:72:c0:42:14:50
- [ 26.324391] wlan1: send auth to 38:72:c0:42:14:50 (try 1/3)
- [ 26.332633] wlan1: authenticated
- [ 26.338247] wlan1: associate with 38:72:c0:42:14:50 (try 1/3)
- [ 26.347432] wlan1: RX AssocResp from 38:72:c0:42:14:50 (capab=0x411 status=0 aid=8)
- [ 26.355560] wlan1: associated
- [ 26.359058] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
- [ 26.858566] ath10k_pci 0000:00:00.0: no channel configured; ignoring frame(s)!
- [ 92.409149] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 92.415834] br-lan: port 2(wlan0) entered forwarding state
- [ 92.421502] br-lan: port 2(wlan0) entered forwarding state
- [ 94.416273] br-lan: port 2(wlan0) entered forwarding state
- [20142.423654] eth1: link down
- [20142.426860] br-lan: port 1(eth1) entered disabled state
- [20142.924581] eth1: link up (1000Mbps/Full duplex)
- [20142.929329] br-lan: port 1(eth1) entered forwarding state
- [20142.934902] br-lan: port 1(eth1) entered forwarding state
- [20144.933055] br-lan: port 1(eth1) entered forwarding state
- root@lede:~# lsmod
- ath 17701 5 ath9k,ath9k_htc,ath9k_common,ath9k_hw,ath10k_core
- ath10k_core 248153 1 ath10k_pci
- ath10k_pci 29946 0
- ath9k 93536 0
- ath9k_common 19502 2 ath9k,ath9k_htc
- ath9k_htc 53923 0
- ath9k_hw 338337 3 ath9k,ath9k_htc,ath9k_common
- cfg80211 231124 7 ath9k,ath9k_htc,ath9k_common,rt2x00lib,ath10k_core,ath,mac80211
- compat 11245 6 ath9k,ath9k_htc,ath9k_common,ath10k_pci,mac80211,cfg80211
- crc_ccitt 1035 1 ppp_async
- crc_itu_t 1035 0
- ehci_hcd 32567 1 ehci_platform
- ehci_platform 4432 0
- exfat 93899 0
- gpio_button_hotplug 6256 0
- ip6_tables 9281 2 ip6table_mangle,ip6table_filter
- ip6t_REJECT 976 2
- ip6table_filter 656 1
- ip6table_mangle 1136 1
- ip_tables 9453 3 iptable_nat,iptable_mangle,iptable_filter
- ipt_MASQUERADE 688 1
- ipt_REJECT 944 2
- iptable_filter 720 1
- iptable_mangle 944 1
- iptable_nat 784 1
- ledtrig_usbport 2208 0
- mac80211 411940 5 ath9k,ath9k_htc,rt2x00usb,rt2x00lib,ath10k_core
- nf_conntrack 55562 9 nf_nat_ipv4,nf_conntrack_ipv6,nf_conntrack_ipv4,xt_state,xt_conntrack,xt_CT,nf_nat_masquerade_ipv4,nf_nat,nf_conntrack_rtcache
- nf_conntrack_ipv4 5392 12
- nf_conntrack_ipv6 5904 7
- nf_conntrack_rtcache 2512 0
- nf_defrag_ipv4 982 1 nf_conntrack_ipv4
- nf_defrag_ipv6 9367 1 nf_conntrack_ipv6
- nf_log_common 2575 2 nf_log_ipv4,nf_log_ipv6
- nf_log_ipv4 3216 0
- nf_log_ipv6 3408 0
- nf_nat 10412 4 nf_nat_ipv4,xt_nat,nf_nat_redirect,nf_nat_masquerade_ipv4
- nf_nat_ipv4 4401 1 iptable_nat
- nf_nat_masquerade_ipv4 1436 1 ipt_MASQUERADE
- nf_nat_redirect 987 1 xt_REDIRECT
- nf_reject_ipv4 2275 1 ipt_REJECT
- nf_reject_ipv6 2472 1 ip6t_REJECT
- nls_base 4992 2 exfat,usbcore
- ohci_hcd 22207 1 ohci_platform
- ohci_platform 3664 0
- ppp_async 6352 0
- ppp_generic 20386 3 pppoe,ppp_async,pppox
- pppoe 7984 0
- pppox 1386 1 pppoe
- rt2x00lib 35119 1 rt2x00usb
- rt2x00usb 7961 0
- slhc 4443 1 ppp_generic
- usb_common 2221 1 usbcore
- usbcore 121312 7 ath9k_htc,rt2x00usb,ledtrig_usbport,ohci_platform,ohci_hcd,ehci_platform,ehci_hcd
- x_tables 11623 23 ipt_REJECT,ipt_MASQUERADE,xt_time,xt_tcpudp,xt_state,xt_nat,xt_multiport,xt_mark,xt_mac,xt_limit,xt_conntrack,xt_comment,xt_TCPMSS,xt_REDIRECT,xt_LOG,xt_CT,iptable_mangle,iptable_filter,ip_tables,ip6t_REJECT,ip6table_mangle,ip6table_filter,ip6_tables
- xt_CT 2512 0
- xt_LOG 784 0
- xt_REDIRECT 688 0
- xt_TCPMSS 2736 4
- xt_comment 528139
- xt_conntrack 2256 18
- xt_limit 1040 20
- xt_mac 656 0
- xt_mark 688 0
- xt_multiport 1232 0
- xt_nat 1168 0
- xt_state 720 0
- xt_tcpudp 1776 12
- xt_time 1648 0
- root@lede:~# iwinfo
- wlan0 ESSID: "dummy" <-- this is the ath10k radio
- Access Point: 2C:30:33:A1:58:E5
- Mode: Master Channel: 149 (5.745 GHz)
- Tx-Power: 23 dBm Link Quality: 60/70
- Signal: -50 dBm Noise: -106 dBm
- Bit Rate: 6.0 MBit/s
- Encryption: WPA2 PSK (CCMP)
- Type: nl80211 HW Mode(s): 802.11nac
- Hardware: 168C:003C 0000:0000 [Qualcomm Atheros QCA9880]
- TX power offset: none
- Frequency offset: none
- Supports VAPs: yes PHY name: phy0
- wlan1 ESSID: "-----------" <-- USB dongle
- Access Point: 38:72:C0:42:14:50
- Mode: Client Channel: 11 (2.462 GHz)
- Tx-Power: 22 dBm Link Quality: 40/70
- Signal: -70 dBm Noise: -95 dBm
- Bit Rate: 39.0 MBit/s
- Encryption: WPA2 PSK (CCMP)
- Type: nl80211 HW Mode(s): 802.11bgn
- Hardware: unknown [Generic MAC80211]
- TX power offset: unknown
- Frequency offset: unknown
- Supports VAPs: yes PHY name: phy1
- root@lede:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement