Pastebin launched a little side project called VERYVIRAL.com, check it out ;-) Want more features on Pastebin? Sign Up, it's FREE!
Guest

Untitled

By: a guest on Mar 3rd, 2011  |  syntax: None  |  size: 16.37 KB  |  views: 75  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.03.03 15:20:52 =~=~=~=~=~=~=~=~=~=~=~=
  2.  
  3. NAND Boot
  4. Starting U-Boot ...
  5. [S] pressed, enable UART0
  6. [M] pressed, boot from sd card
  7.  
  8.  
  9. U-Boot 2010.06-dirty (Feb 27 2011 - 16:11:47)
  10.  
  11. Board: Qi LB60 (Ingenic XBurst Jz4740 SoC, Speed 336 MHz)
  12. DRAM:  32 MiB
  13. NAND:  2048 MiB
  14. [    0.000000] Linux version 2.6.37.1 (bas@bas) (gcc version 4.5.2 (Linaro GCC 4.5-2011.02-0) ) #5 PREEMPT Thu Mar 3 13:48:15 MSK 2011
  15. [    0.000000] bootconsole [early0] enabled
  16. [    0.000000] CPU revision is: 0ad0024f (Ingenic JZRISC)
  17. [    0.000000] Determined physical RAM map:
  18. [    0.000000]  memory: 02000000 @ 00000000 (usable)
  19. [    0.000000] User-defined physical RAM map:
  20. [    0.000000]  memory: 02000000 @ 00000000 (usable)
  21. [    0.000000] Zone PFN ranges:
  22. [    0.000000]   Normal   0x00000000 -> 0x00002000
  23. [    0.000000] Movable zone start PFN for each node
  24. [    0.000000] early_node_map[1] active PFN ranges
  25. [    0.000000]     0: 0x00000000 -> 0x00002000
  26. [    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 8128
  27. [    0.000000] Kernel command line: mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait
  28. [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  29. [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  30. [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  31. [    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
  32. [    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
  33. [    0.000000] Memory: 28448k/32768k available (2693k kernel code, 4320k reserved, 958k data, 148k init, 0k highmem)
  34. [    0.000000] NR_IRQS:190
  35. [    0.000000] Console: colour dummy device 80x25
  36. [    0.000000] Linux version 2.6.37.1 (bas@bas) (gcc version 4.5.2 (Linaro GCC 4.5-2011.02-0) ) #5 PREEMPT Thu Mar 3 13:48:15 MSK 2011
  37. [    0.000000] bootconsole [early0] enabled
  38. [    0.000000] CPU revision is: 0ad0024f (Ingenic JZRISC)
  39. [    0.000000] Determined physical RAM map:
  40. [    0.000000]  memory: 02000000 @ 00000000 (usable)
  41. [    0.000000] User-defined physical RAM map:
  42. [    0.000000]  memory: 02000000 @ 00000000 (usable)
  43. [    0.000000] Zone PFN ranges:
  44. [    0.000000]   Normal   0x00000000 -> 0x00002000
  45. [    0.000000] Movable zone start PFN for each node
  46. [    0.000000] early_node_map[1] active PFN ranges
  47. [    0.000000]     0: 0x00000000 -> 0x00002000
  48. [    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 8128
  49. [    0.000000] Kernel command line: mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait
  50. [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  51. [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  52. [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  53. [    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
  54. [    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
  55. [    0.000000] Memory: 28448k/32768k available (2693k kernel code, 4320k reserved, 958k data, 148k init, 0k highmem)
  56. [    0.000000] NR_IRQS:190
  57. [    0.000000] Console: colour dummy device 80x25
  58. [    0.000000] console [tty0] enabled
  59. [    0.010000] Calibrating delay loop... 335.05 BogoMIPS (lpj=1675264)
  60. [    0.250000] pid_max: default: 32768 minimum: 301
  61. [    0.260000] Mount-cache hash table entries: 512
  62. [    0.280000] NET: Registered protocol family 16
  63. [    0.300000] JZ4740 GPIO initalized
  64. [    0.310000] Qi Hardware JZ4740 QI LB60 setup
  65. [    0.370000] bio: create slab <bio-0> at 0
  66. [    0.390000] Switching to clocksource jz4740-timer
  67. [    0.510000] NET: Registered protocol family 2
  68. [    0.520000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  69. [    0.530000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  70. [    0.540000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  71. [    0.550000] TCP: Hash tables configured (established 1024 bind 1024)
  72. [    0.560000] TCP reno registered
  73. [    0.570000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  74. [    0.580000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  75. [    0.600000] NET: Registered protocol family 1
  76. [    0.610000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  77. [    0.620000] msgmni has been set to 55
  78. [    0.630000] io scheduler noop registered
  79. [    0.640000] io scheduler deadline registered (default)
  80. [    0.670000] Console: switching to colour frame buffer device 40x15
  81. [    0.700000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  82. [    0.710000] serial8250.0: ttyS0 at MMIO 0x10030000 (irq = 17) is a 16550
  83. [    0.720000] console [ttyS0] enabled, bootconsole disabled
  84. [    0.720000] console [ttyS0] enabled, bootconsole disabled
  85. [    0.730000] serial8250.0: ttyS1 at MMIO 0x10031000 (irq = 16) is a 16550
  86. [    0.760000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung )
  87. [    0.770000] Scanning device for bad blocks
  88. [    1.050000] Bad eraseblock 3890 at 0x00007997f000
  89. [    1.080000] Creating 4 MTD partitions on "jz4740-nand":
  90. [    1.090000] 0x000000000000-0x000000400000 : "NAND BOOT partition"
  91. [    1.100000] 0x000000400000-0x000000800000 : "NAND KERNEL partition"
  92. [    1.120000] 0x000000800000-0x000020800000 : "NAND ROOTFS partition"
  93. [    1.140000] 0x000020800000-0x000080000000 : "NAND DATA partition"
  94. [    1.160000] jz4740-nand jz4740-nand.0: Successfully registered JZ4740 NAND driver
  95. [    1.200000] g_ether gadget: using random self ethernet address
  96. [    1.220000] g_ether gadget: using random host ethernet address
  97. [    1.230000] usb0: MAC 62:ac:c1:e3:39:35
  98. [    1.240000] usb0: HOST MAC 86:16:25:16:88:06
  99. [    1.250000] g_ether gadget: controller 'jz4740-udc' not recognized; trying CDC Ethernet (ECM)
  100. [    1.260000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
  101. [    1.270000] g_ether gadget: g_ether ready
  102. [    1.280000] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  103. [    1.300000] input: matrix-keypad as /devices/platform/matrix-keypad/input/input1
  104. [    1.310000] input: pwm-beeper as /devices/platform/pwm-beeper/input/input2
  105. [    1.320000] jz4740-rtc jz4740-rtc: rtc core: registered jz4740-rtc as rtc0
  106. [    1.340000] jz4740-mmc jz4740-mmc.0: JZ SD/MMC card driver registered
  107. [    1.360000] TCP westwood registered
  108. [    1.370000] NET: Registered protocol family 17
  109. [    1.400000] jz4740-rtc jz4740-rtc: setting system clock to 1970-01-01 00:06:29 UTC (389)
  110. [    1.410000] Waiting for root device /dev/mmcblk0p1...
  111. [    1.450000] mmc0: host does not support reading read-only switch. assuming write-enable.
  112. [    1.460000] mmc0: new SD card at address aaaa
  113. [    1.480000] mmcblk0: mmc0:aaaa SU256 241 MiB
  114. [    1.500000]  mmcblk0: p1 p2
  115. [    1.530000] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
  116. [    1.620000] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
  117. [    1.650000] VFS: Mounted root (ext2 filesystem) on device 179:1.
  118. [    1.660000] Freeing unused kernel memory: 148k freed
  119. - preinit -
  120. Press the [f] key and hit [enter] to enter failsafe mode
  121. - regular preinit -
  122. [    6.640000] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
  123. - init -
  124.  
  125. Please press Enter to activate this console. [   10.910000] asoc: jz4740-hifi <-> jz4740-i2s mapping ok
  126.  
  127.  
  128.  
  129. BusyBox v1.17.3 (2011-03-02 16:46:00 MSK) built-in shell (ash)
  130. Enter 'help' for a list of built-in commands.
  131.  
  132.   _______                     ________        __
  133.  |       |.-----.-----.-----.|  |  |  |.----.|  |_
  134.  |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
  135.  |_______||   __|_____|__|__||________||__|  |____|
  136.           |__| W I R E L E S S   F R E E D O M
  137.  ATTITUDE ADJUSTMENT (bleeding edge, r25820) ----------
  138.   * 1/4 oz Vodka      Pour all ingredents into mixing
  139.   * 1/4 oz Gin        tin with ice, strain into glass.
  140.   * 1/4 oz Amaretto
  141.   * 1/4 oz Triple sec
  142.   * 1/4 oz Peach schnapps
  143.   * 1/4 oz Sour mix
  144.   * 1 splash Cranberry juice
  145.  -----------------------------------------------------
  146. root@BenNanoNote:/#
  147. root@BenNanoNote:/# uname -a
  148. Linux BenNanoNote 2.6.37.1 #5 PREEMPT Thu Mar 3 13:48:15 MSK 2011 mips GNU/Linux
  149. root@BenNanoNote:/# kexec -l /bo
  150. root@BenNanoNote:/# kexec -l /boot/vm
  151. root@BenNanoNote:/# kexec -l /boot/vmlinux.elf
  152. CMDLINE[2]: (null)
  153. root@BenNanoNote:/# kexec -e
  154. [   40.280000] Starting new kernel
  155. [   40.300000] image->start = 14370
  156. [   40.310000] image-phys-to-virt->start = 80014370
  157. [   40.320000] Will call new kernel at 80014370
  158. [   40.320000] Bye ...
  159. [    0.000000] Linux version 2.6.37.1 (bas@bas) (gcc version 4.5.2 (Linaro GCC 4.5-2011.02-0) ) #6 PREEMPT Thu Mar 3 15:13:06 MSK 2011
  160. [    0.000000] bootconsole [early0] enabled
  161. [    0.000000] CPU revision is: 0ad0024f (Ingenic JZRISC)
  162. [    0.000000] Determined physical RAM map:
  163. [    0.000000]  memory: 02000000 @ 00000000 (usable)
  164. [    0.000000] User-defined physical RAM map:
  165. [    0.000000]  memory: 02000000 @ 00000000 (usable)
  166. [    0.000000] Zone PFN ranges:
  167. [    0.000000]   Normal   0x00000000 -> 0x00002000
  168. [    0.000000] Movable zone start PFN for each node
  169. [    0.000000] early_node_map[1] active PFN ranges
  170. [    0.000000]     0: 0x00000000 -> 0x00002000
  171. [    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 8128
  172. [    0.000000] Kernel command line:  mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait
  173. [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  174. [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  175. [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  176. [    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
  177. [    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
  178. [    0.000000] Memory: 28444k/32768k available (2692k kernel code, 4324k reserved, 959k data, 152k init, 0k highmem)
  179. [    0.000000] NR_IRQS:190
  180. [    0.000000] Console: colour dummy device 80x25
  181. [    0.000000] Linux version 2.6.37.1 (bas@bas) (gcc version 4.5.2 (Linaro GCC 4.5-2011.02-0) ) #6 PREEMPT Thu Mar 3 15:13:06 MSK 2011
  182. [    0.000000] bootconsole [early0] enabled
  183. [    0.000000] CPU revision is: 0ad0024f (Ingenic JZRISC)
  184. [    0.000000] Determined physical RAM map:
  185. [    0.000000]  memory: 02000000 @ 00000000 (usable)
  186. [    0.000000] User-defined physical RAM map:
  187. [    0.000000]  memory: 02000000 @ 00000000 (usable)
  188. [    0.000000] Zone PFN ranges:
  189. [    0.000000]   Normal   0x00000000 -> 0x00002000
  190. [    0.000000] Movable zone start PFN for each node
  191. [    0.000000] early_node_map[1] active PFN ranges
  192. [    0.000000]     0: 0x00000000 -> 0x00002000
  193. [    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 8128
  194. [    0.000000] Kernel command line:  mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait
  195. [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  196. [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  197. [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  198. [    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
  199. [    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
  200. [    0.000000] Memory: 28444k/32768k available (2692k kernel code, 4324k reserved, 959k data, 152k init, 0k highmem)
  201. [    0.000000] NR_IRQS:190
  202. [    0.000000] Console: colour dummy device 80x25
  203. [    0.000000] console [tty0] enabled
  204. [    0.010000] Calibrating delay loop... 335.05 BogoMIPS (lpj=1675264)
  205. [    0.250000] pid_max: default: 32768 minimum: 301
  206. [    0.260000] Mount-cache hash table entries: 512
  207. [    0.280000] NET: Registered protocol family 16
  208. [    0.300000] JZ4740 GPIO initalized
  209. [    0.310000] Qi Hardware JZ4740 QI LB60 setup
  210. [    0.370000] bio: create slab <bio-0> at 0
  211. [    0.390000] Switching to clocksource jz4740-timer
  212. [    0.510000] NET: Registered protocol family 2
  213. [    0.520000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  214. [    0.530000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  215. [    0.540000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  216. [    0.550000] TCP: Hash tables configured (established 1024 bind 1024)
  217. [    0.560000] TCP reno registered
  218. [    0.570000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  219. [    0.580000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  220. [    0.590000] NET: Registered protocol family 1
  221. [    0.600000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  222. [    0.610000] msgmni has been set to 55
  223. [    0.620000] io scheduler noop registered
  224. [    0.630000] io scheduler deadline registered (default)
  225. [    0.660000] Console: switching to colour frame buffer device 40x15
  226. [    0.680000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  227. [    0.700000] serial8250.0: ttyS0 at MMIO 0x10030000 (irq = 17) is a 16550
  228. [    0.710000] console [ttyS0] enabled, bootconsole disabled
  229. [    0.710000] console [ttyS0] enabled, bootconsole disabled
  230. [    0.730000] serial8250.0: ttyS1 at MMIO 0x10031000 (irq = 16) is a 16550
  231. [    0.760000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung )
  232. [    0.770000] Scanning device for bad blocks
  233. [    1.050000] Bad eraseblock 3890 at 0x00007997f000
  234. [    1.070000] Creating 4 MTD partitions on "jz4740-nand":
  235. [    1.080000] 0x000000000000-0x000000400000 : "NAND BOOT partition"
  236. [    1.100000] 0x000000400000-0x000000800000 : "NAND KERNEL partition"
  237. [    1.110000] 0x000000800000-0x000020800000 : "NAND ROOTFS partition"
  238. [    1.120000] 0x000020800000-0x000080000000 : "NAND DATA partition"
  239. [    1.140000] jz4740-nand jz4740-nand.0: Successfully registered JZ4740 NAND driver
  240. [    1.190000] g_ether gadget: using random self ethernet address
  241. [    1.200000] g_ether gadget: using random host ethernet address
  242. [    1.210000] usb0: MAC 4a:ba:c0:b0:f7:c3
  243. [    1.220000] usb0: HOST MAC 9e:da:7a:45:17:8c
  244. [    1.230000] g_ether gadget: controller 'jz4740-udc' not recognized; trying CDC Ethernet (ECM)
  245. [    1.240000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
  246. [    1.260000] g_ether gadget: g_ether ready
  247. [    1.270000] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  248. [    1.280000] input: matrix-keypad as /devices/platform/matrix-keypad/input/input1
  249. [    1.300000] input: pwm-beeper as /devices/platform/pwm-beeper/input/input2
  250. [    1.320000] jz4740-rtc jz4740-rtc: rtc core: registered jz4740-rtc as rtc0
  251. [    1.340000] jz4740-mmc jz4740-mmc.0: JZ SD/MMC card driver registered
  252. [    1.350000] TCP westwood registered
  253. [    1.360000] NET: Registered protocol family 17
  254. [    1.390000] jz4740-rtc jz4740-rtc: setting system clock to 1970-01-01 00:07:10 UTC (430)
  255. [    1.400000] Waiting for root device /dev/mmcblk0p1...
  256. [    1.420000] mmc0: host does not support reading read-only switch. assuming write-enable.
  257. [    1.430000] mmc0: new SD card at address aaaa
  258. [    1.450000] mmcblk0: mmc0:aaaa SU256 241 MiB
  259. [    1.470000]  mmcblk0: p1 p2
  260. [    1.520000] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
  261. [    1.610000] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
  262. [    1.640000] VFS: Mounted root (ext2 filesystem) on device 179:1.
  263. [    1.660000] Freeing unused kernel memory: 152k freed
  264. - preinit -
  265. Press the [f] key and hit [enter] to enter failsafe mode
  266.  
  267. - regular preinit -
  268. [    6.140000] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
  269. - init -
  270.  
  271. Please press Enter to activate this console.
  272.  
  273.  
  274. BusyBox v1.17.3 (2011-03-02 16:46:00 MSK) built-in shell (ash)
  275. Enter 'help' for a list of built-in commands.
  276.  
  277.   _______                     ________        __
  278.  |       |.-----.-----.-----.|  |  |  |.----.|  |_
  279.  |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
  280.  |_______||   __|_____|__|__||________||__|  |____|
  281.           |__| W I R E L E S S   F R E E D O M
  282.  ATTITUDE ADJUSTMENT (bleeding edge, r25820) ----------
  283.   * 1/4 oz Vodka      Pour all ingredents into mixing
  284.   * 1/4 oz Gin        tin with ice, strain into glass.
  285.   * 1/4 oz Amaretto
  286.   * 1/4 oz Triple sec
  287.   * 1/4 oz Peach schnapps
  288.   * 1/4 oz Sour mix
  289.   * 1 splash Cranberry juice
  290.  -----------------------------------------------------
  291. root@BenNanoNote:/# uname -a
  292. Linux BenNanoNote 2.6.37.1 #6 PREEMPT Thu Mar 3 15:13:06 MSK 2011 mips GNU/Linux
  293. root@BenNanoNote:/# [   10.490000] asoc: jz4740-hifi <-> jz4740-i2s mapping ok
  294.  
  295. root@BenNanoNote:/#