Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.8.13-gentoo (root@localhost.localdomain) (gcc version 4.6.3 (Gentoo 4.6.3 p1.13, pie-0.5.2) ) #4 SMP Mon May 20 01:40:20 Local time zone must be set--see zic
- [ 0.000000] Command line: BOOT_IMAGE=/boot/kernel-3.8.13-gentoo root=/dev/sda3
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfb3efff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000dfb3f000-0x00000000dfbbefff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000dfbbf000-0x00000000dfebefff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000dfebf000-0x00000000dfef5fff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000dfef6000-0x00000000dfefffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000dff00000-0x00000000dfffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000106ffffff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000107000000-0x000000011effffff] reserved
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.7 present.
- [ 0.000000] DMI: LENOVO 20080 /Inagua, BIOS 41CN26WW(V2.02) 09/14/2011
- [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x107000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-FFFFF write-through
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 base 080000000 mask FC0000000 write-back
- [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
- [ 0.000000] 3 base 0DFEBE000 mask FFFFFF000 uncachable
- [ 0.000000] 4 base 0FFE00000 mask FFFE00000 write-protect
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] TOM2: 000000011f000000 aka 4592M
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820: last_pfn = 0xdff00 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
- [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
- [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0xdfefffff]
- [ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
- [ 0.000000] [mem 0xc0000000-0xdfdfffff] page 2M
- [ 0.000000] [mem 0xdfe00000-0xdfefffff] page 4k
- [ 0.000000] kernel direct mapping tables up to 0xdfefffff @ [mem 0x1fffd000-0x1fffffff]
- [ 0.000000] init_memory_mapping: [mem 0x100000000-0x106ffffff]
- [ 0.000000] [mem 0x100000000-0x106ffffff] page 2M
- [ 0.000000] kernel direct mapping tables up to 0x106ffffff @ [mem 0xdfefe000-0xdfefffff]
- [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 LENOVO)
- [ 0.000000] ACPI: XSDT 00000000dfef5120 00064 (v01 LENOVO CB-01 00000001 01000013)
- [ 0.000000] ACPI: FACP 00000000dfef3000 000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.000000] ACPI: DSDT 00000000dfee6000 09445 (v01 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.000000] ACPI: FACS 00000000dfc98000 00040
- [ 0.000000] ACPI: SLIC 00000000dfef4000 00176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.000000] ACPI: HPET 00000000dfef2000 00038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.000000] ACPI: APIC 00000000dfef1000 00084 (v02 INSYDE IS CRB 00000001 ACPI 00040000)
- [ 0.000000] ACPI: MCFG 00000000dfef0000 0003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.000000] ACPI: BOOT 00000000dfee5000 00028 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
- [ 0.000000] ACPI: SSDT 00000000dfee4000 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
- [ 0.000000] ACPI: SSDT 00000000dfee2000 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000106ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x106ffffff]
- [ 0.000000] NODE_DATA [mem 0x106ffc000-0x106ffffff]
- [ 0.000000] [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880102c00000-ffff8801065fffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal [mem 0x100000000-0x106ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
- [ 0.000000] node 0: [mem 0x00100000-0xdfb3efff]
- [ 0.000000] node 0: [mem 0xdfef6000-0xdfefffff]
- [ 0.000000] node 0: [mem 0x100000000-0x106ffffff]
- [ 0.000000] On node 0 totalpages: 944856
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 6 pages reserved
- [ 0.000000] DMA zone: 3913 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 14254 pages used for memmap
- [ 0.000000] DMA32 zone: 897947 pages, LIFO batch:31
- [ 0.000000] Normal zone: 448 pages used for memmap
- [ 0.000000] Normal zone: 28224 pages, LIFO batch:7
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 00000000dfb3f000 - 00000000dfbbf000
- [ 0.000000] PM: Registered nosave memory: 00000000dfbbf000 - 00000000dfebf000
- [ 0.000000] PM: Registered nosave memory: 00000000dfebf000 - 00000000dfef6000
- [ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000e0000000
- [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
- [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
- [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
- [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
- [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
- [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
- [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fee00000
- [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
- [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
- [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
- [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
- [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880106c00000 s78656 r8192 d23744 u524288
- [ 0.000000] pcpu-alloc: s78656 r8192 d23744 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 930084
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-3.8.13-gentoo root=/dev/sda3
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 3638860k/4308992k available (6660k kernel code, 529568k absent, 140564k reserved, 6323k data, 624k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
- [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.001000] tsc: Detected 1596.089 MHz processor
- [ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.17 BogoMIPS (lpj=1596089)
- [ 0.000019] pid_max: default: 32768 minimum: 301
- [ 0.000063] Security Framework initialized
- [ 0.000072] SELinux: Initializing.
- [ 0.000087] SELinux: Starting in permissive mode
- [ 0.000583] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.003406] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.004701] Mount-cache hash table entries: 256
- [ 0.005044] Initializing cgroup subsys cpuacct
- [ 0.005056] Initializing cgroup subsys freezer
- [ 0.005099] tseg: 00dff00000
- [ 0.005103] CPU: Physical Processor ID: 0
- [ 0.005108] CPU: Processor Core ID: 0
- [ 0.005114] mce: CPU supports 6 MCE banks
- [ 0.005134] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
- Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
- tlb_flushall_shift: 5
- [ 0.005412] Freeing SMP alternatives: 24k freed
- [ 0.005435] ACPI: Core revision 20121018
- [ 0.016302] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.026315] smpboot: CPU0: AMD E-350 Processor (fam: 14, model: 01, stepping: 00)
- [ 0.128238] Performance Events: AMD PMU driver.
- [ 0.128250] ... version: 0
- [ 0.128255] ... bit width: 48
- [ 0.128260] ... generic registers: 4
- [ 0.128265] ... value mask: 0000ffffffffffff
- [ 0.128270] ... max period: 00007fffffffffff
- [ 0.128275] ... fixed-purpose events: 0
- [ 0.128280] ... event mask: 000000000000000f
- [ 0.128652] MCE: In-kernel MCE decoding enabled.
- [ 0.128868] smpboot: Booting Node 0, Processors #1
- [ 0.142011] Brought up 2 CPUs
- [ 0.142022] smpboot: Total of 2 processors activated (6384.35 BogoMIPS)
- [ 0.143071] devtmpfs: initialized
- [ 0.143535] PM: Registering ACPI NVS region [mem 0xdfbbf000-0xdfebefff] (3145728 bytes)
- [ 0.143854] RTC time: 15:56:13, date: 06/29/13
- [ 0.143946] NET: Registered protocol family 16
- [ 0.144353] kworker/u:0 (20) used greatest stack depth: 6752 bytes left
- [ 0.144540] kworker/u:0 (21) used greatest stack depth: 5696 bytes left
- [ 0.146280] ACPI: bus type pci registered
- [ 0.146508] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 0.146521] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
- [ 0.152341] PCI: Using configuration type 1 for base access
- [ 0.153499] mtrr: your CPUs had inconsistent variable MTRR settings
- [ 0.153519] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.153524] mtrr: corrected configuration.
- [ 0.185202] bio: create slab <bio-0> at 0
- [ 0.185649] ACPI: Added _OSI(Module Device)
- [ 0.185666] ACPI: Added _OSI(Processor Device)
- [ 0.185673] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.185679] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.187869] ACPI: EC: Look up EC in DSDT
- [ 0.190226] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.195732] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.202383] ACPI: Interpreter enabled
- [ 0.202407] ACPI: (supports S0 S3 S4 S5)
- [ 0.202455] ACPI: Using IOAPIC for interrupt routing
- [ 0.249387] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
- [ 0.249786] ACPI: No dock devices found.
- [ 0.249799] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.252453] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.252474] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.252686] \_SB_.PCI0:_OSC request failed
- [ 0.252690] _OSC request data:1 8 0
- [ 0.252957] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
- [ 0.252975] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
- [ 0.253315] PCI host bridge to bus 0000:00
- [ 0.253342] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.253350] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.253359] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.253367] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.253374] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
- [ 0.253382] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
- [ 0.253389] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
- [ 0.253397] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
- [ 0.253404] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
- [ 0.253412] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
- [ 0.253419] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
- [ 0.253426] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
- [ 0.253434] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
- [ 0.253441] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
- [ 0.253448] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
- [ 0.253456] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
- [ 0.253463] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xffffffff]
- [ 0.253487] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
- [ 0.253547] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
- [ 0.253562] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
- [ 0.253572] pci 0000:00:01.0: reg 14: [io 0x3000-0x30ff]
- [ 0.253582] pci 0000:00:01.0: reg 18: [mem 0xf0200000-0xf023ffff]
- [ 0.253644] pci 0000:00:01.0: supports D1 D2
- [ 0.253694] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
- [ 0.253720] pci 0000:00:11.0: reg 10: [io 0x3118-0x311f]
- [ 0.253734] pci 0000:00:11.0: reg 14: [io 0x3124-0x3127]
- [ 0.253748] pci 0000:00:11.0: reg 18: [io 0x3110-0x3117]
- [ 0.253762] pci 0000:00:11.0: reg 1c: [io 0x3120-0x3123]
- [ 0.253776] pci 0000:00:11.0: reg 20: [io 0x3100-0x310f]
- [ 0.253790] pci 0000:00:11.0: reg 24: [mem 0xf0248000-0xf02483ff]
- [ 0.253870] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
- [ 0.253889] pci 0000:00:12.0: reg 10: [mem 0xf0247000-0xf0247fff]
- [ 0.253985] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
- [ 0.254567] pci 0000:00:12.2: reg 10: [mem 0xf0246000-0xf02460ff]
- [ 0.257416] pci 0000:00:12.2: supports D1 D2
- [ 0.257421] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- [ 0.257456] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
- [ 0.257476] pci 0000:00:13.0: reg 10: [mem 0xf0245000-0xf0245fff]
- [ 0.257572] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
- [ 0.258052] pci 0000:00:13.2: reg 10: [mem 0xf0244000-0xf02440ff]
- [ 0.260885] pci 0000:00:13.2: supports D1 D2
- [ 0.260889] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- [ 0.260938] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
- [ 0.261045] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
- [ 0.261075] pci 0000:00:14.2: reg 10: [mem 0xf0240000-0xf0243fff 64bit]
- [ 0.261170] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- [ 0.261193] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
- [ 0.261295] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
- [ 0.261367] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
- [ 0.261474] pci 0000:00:15.0: supports D1 D2
- [ 0.261510] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
- [ 0.261616] pci 0000:00:15.1: supports D1 D2
- [ 0.261656] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
- [ 0.261704] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
- [ 0.261747] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
- [ 0.261793] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
- [ 0.261851] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
- [ 0.261894] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
- [ 0.261938] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
- [ 0.261981] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
- [ 0.262112] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
- [ 0.262131] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.262135] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.262140] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.262143] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
- [ 0.262147] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
- [ 0.262151] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
- [ 0.262155] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
- [ 0.262159] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
- [ 0.262163] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
- [ 0.262167] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
- [ 0.262171] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
- [ 0.262175] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
- [ 0.262179] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
- [ 0.262182] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
- [ 0.262186] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
- [ 0.262190] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xffffffff] (subtractive decode)
- [ 0.262290] pci 0000:02:00.0: [1969:2062] type 00 class 0x020000
- [ 0.262322] pci 0000:02:00.0: reg 10: [mem 0xf0100000-0xf013ffff 64bit]
- [ 0.262340] pci 0000:02:00.0: reg 18: [io 0x2000-0x207f]
- [ 0.262482] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.264255] pci 0000:00:15.0: PCI bridge to [bus 02]
- [ 0.264283] pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
- [ 0.264291] pci 0000:00:15.0: bridge window [mem 0xf0100000-0xf01fffff]
- [ 0.264405] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
- [ 0.264442] pci 0000:03:00.0: reg 10: [mem 0xf0000000-0xf000ffff 64bit]
- [ 0.264592] pci 0000:03:00.0: supports D1
- [ 0.264596] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
- [ 0.266224] pci 0000:00:15.1: PCI bridge to [bus 03]
- [ 0.266264] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff]
- [ 0.266367] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
- [ 0.266476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB1._PRT]
- [ 0.266612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
- [ 0.266776] \_SB_.PCI0:_OSC request failed
- [ 0.266779] _OSC request data:1 1f 0
- [ 0.266787] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
- [ 0.266797] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
- [ 0.274027] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
- [ 0.274166] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
- [ 0.274290] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
- [ 0.274412] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
- [ 0.274513] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
- [ 0.274595] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
- [ 0.274675] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
- [ 0.274755] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
- [ 0.275631] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.275661] vgaarb: loaded
- [ 0.275666] vgaarb: bridge control possible 0000:00:01.0
- [ 0.276238] SCSI subsystem initialized
- [ 0.276258] ACPI: bus type scsi registered
- [ 0.276657] libata version 3.00 loaded.
- [ 0.276804] ACPI: bus type usb registered
- [ 0.277198] usbcore: registered new interface driver usbfs
- [ 0.277316] usbcore: registered new interface driver hub
- [ 0.277517] usbcore: registered new device driver usb
- [ 0.278655] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.278673] PCI: Using ACPI for IRQ routing
- [ 0.281314] PCI: pci_cache_line_size set to 64 bytes
- [ 0.281418] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
- [ 0.281423] e820: reserve RAM buffer [mem 0xdfb3f000-0xdfffffff]
- [ 0.281426] e820: reserve RAM buffer [mem 0xdff00000-0xdfffffff]
- [ 0.281429] e820: reserve RAM buffer [mem 0x107000000-0x107ffffff]
- [ 0.283293] NetLabel: Initializing
- [ 0.283310] NetLabel: domain hash size = 128
- [ 0.283315] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.283337] NetLabel: unlabeled traffic allowed by default
- [ 0.283368] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.283811] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.283832] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
- [ 0.285931] Switching to clocksource hpet
- [ 0.314474] pnp: PnP ACPI init
- [ 0.314536] ACPI: bus type pnp registered
- [ 0.315112] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.315132] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.315145] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.315698] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.315822] pnp 00:02: [dma 4]
- [ 0.315998] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.316390] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.316688] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.316839] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.317134] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.317356] pnp 00:07: Plug and Play ACPI device, IDs SYN072d SYN0700 SYN0002 PNP0f13 (active)
- [ 0.317746] system 00:08: [io 0x0400-0x04cf] has been reserved
- [ 0.317767] system 00:08: [io 0x04d0-0x04d1] has been reserved
- [ 0.317775] system 00:08: [io 0x04d6] has been reserved
- [ 0.317783] system 00:08: [io 0x0680-0x06ff] has been reserved
- [ 0.317791] system 00:08: [io 0x077a] has been reserved
- [ 0.317799] system 00:08: [io 0x0c00-0x0c01] has been reserved
- [ 0.317806] system 00:08: [io 0x0c14] has been reserved
- [ 0.317814] system 00:08: [io 0x0c50-0x0c52] has been reserved
- [ 0.317821] system 00:08: [io 0x0c6c] has been reserved
- [ 0.317828] system 00:08: [io 0x0c6f] has been reserved
- [ 0.317836] system 00:08: [io 0x0cd0-0x0cdb] has been reserved
- [ 0.317844] system 00:08: [io 0xe02c-0xe02f] has been reserved
- [ 0.317857] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.318419] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
- [ 0.318440] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
- [ 0.318454] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.325767] pnp: PnP ACPI: found 10 devices
- [ 0.325785] ACPI: ACPI bus type pnp unregistered
- [ 0.331371] pci 0000:00:14.4: PCI bridge to [bus 01]
- [ 0.331405] pci 0000:00:15.0: PCI bridge to [bus 02]
- [ 0.331415] pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
- [ 0.331427] pci 0000:00:15.0: bridge window [mem 0xf0100000-0xf01fffff]
- [ 0.331443] pci 0000:00:15.1: PCI bridge to [bus 03]
- [ 0.331454] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff]
- [ 0.331516] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.331520] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.331524] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.331528] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
- [ 0.331532] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
- [ 0.331536] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
- [ 0.331540] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
- [ 0.331544] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
- [ 0.331548] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
- [ 0.331552] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
- [ 0.331555] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
- [ 0.331559] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
- [ 0.331563] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
- [ 0.331567] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
- [ 0.331571] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff]
- [ 0.331574] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xffffffff]
- [ 0.331579] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
- [ 0.331583] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
- [ 0.331586] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.331590] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
- [ 0.331594] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
- [ 0.331598] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
- [ 0.331602] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
- [ 0.331605] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
- [ 0.331609] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
- [ 0.331613] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
- [ 0.331617] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
- [ 0.331620] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
- [ 0.331624] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
- [ 0.331628] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
- [ 0.331632] pci_bus 0000:01: resource 18 [mem 0xe0000000-0xf7ffffff]
- [ 0.331636] pci_bus 0000:01: resource 19 [mem 0xfc000000-0xffffffff]
- [ 0.331640] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
- [ 0.331643] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
- [ 0.331648] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
- [ 0.331703] NET: Registered protocol family 2
- [ 0.332011] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.332355] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.332643] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.332749] TCP: reno registered
- [ 0.332783] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.332837] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.333061] NET: Registered protocol family 1
- [ 0.333101] pci 0000:00:01.0: Boot video device
- [ 0.395273] pci 0000:00:12.2: EHCI: BIOS handoff
- [ 0.468186] pci 0000:00:13.2: EHCI: BIOS handoff
- [ 0.480140] PCI: CLS 64 bytes, default 64
- [ 0.480252] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.480268] software IO TLB [mem 0xdbb3f000-0xdfb3f000] (64MB) mapped at [ffff8800dbb3f000-ffff8800dfb3efff]
- [ 0.480359] Simple Boot Flag at 0x44 set to 0x1
- [ 0.480497] LVT offset 0 assigned for vector 0x400
- [ 0.480588] perf: AMD IBS detected (0x000000ff)
- [ 0.482463] microcode: CPU0: patch_level=0x05000028
- [ 0.482490] microcode: CPU1: patch_level=0x05000028
- [ 0.482760] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.483514] audit: initializing netlink socket (disabled)
- [ 0.483542] type=2000 audit(1372521372.379:1): initialized
- [ 0.521111] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.532491] VFS: Disk quotas dquot_6.5.2
- [ 0.532692] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.534927] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.535606] msgmni has been set to 7107
- [ 0.536057] SELinux: Registering netfilter hooks
- [ 0.537512] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.537533] io scheduler noop registered
- [ 0.537539] io scheduler deadline registered
- [ 0.537556] io scheduler cfq registered (default)
- [ 0.538251] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.538513] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.541601] Non-volatile memory driver v1.3
- [ 0.543728] ACPI: AC Adapter [ACAD] (on-line)
- [ 0.544268] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 0.544285] ACPI: Power Button [PWRB]
- [ 0.544440] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
- [ 0.544452] ACPI: Sleep Button [SLPB]
- [ 0.544590] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
- [ 0.544660] ACPI: Lid Switch [LID]
- [ 0.544963] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 0.544992] ACPI: Power Button [PWRF]
- [ 0.551172] acpi device:00: registered as cooling_device0
- [ 0.551257] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
- [ 0.551440] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
- [ 0.551927] ACPI: acpi_idle registered with cpuidle
- [ 0.571485] ACPI: Invalid active0 threshold
- [ 0.572912] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.572930] ACPI: Thermal Zone [THRM] (60 C)
- [ 0.573619] ACPI: Invalid active0 threshold
- [ 0.574856] thermal LNXTHERM:01: registered as thermal_zone1
- [ 0.574881] ACPI: Thermal Zone [THR1] (0 C)
- [ 0.579588] loop: module loaded
- [ 0.580698] ahci 0000:00:11.0: version 3.0
- [ 0.580924] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
- [ 0.580942] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
- [ 0.582435] scsi0 : ahci
- [ 0.583092] scsi1 : ahci
- [ 0.583485] ata1: SATA max UDMA/133 abar m1024@0xf0248000 port 0xf0248100 irq 19
- [ 0.583504] ata2: SATA max UDMA/133 abar m1024@0xf0248000 port 0xf0248180 irq 19
- [ 0.583811] ACPI: Battery Slot [BAT0] (battery absent)
- [ 0.585229] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.585246] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
- [ 0.585255] ehci-pci: EHCI PCI platform driver
- [ 0.585328] ehci-pci 0000:00:12.2: setting latency timer to 64
- [ 0.585335] ehci-pci 0000:00:12.2: EHCI Host Controller
- [ 0.585473] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
- [ 0.585495] QUIRK: Enable AMD PLL fix
- [ 0.585499] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 0.585522] ehci-pci 0000:00:12.2: debug port 1
- [ 0.585533] ehci-pci 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
- [ 0.585540] ehci-pci 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
- [ 0.585583] ehci-pci 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.585594] ehci-pci 0000:00:12.2: MWI active
- [ 0.585597] ehci-pci 0000:00:12.2: supports USB remote wakeup
- [ 0.585638] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0246000
- [ 0.585651] ehci-pci 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
- [ 0.590959] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 0.591071] usb usb1: default language 0x0409
- [ 0.591084] usb usb1: udev 1, busnum 1, minor = 0
- [ 0.591089] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.591098] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.591107] usb usb1: Product: EHCI Host Controller
- [ 0.591114] usb usb1: Manufacturer: Linux 3.8.13-gentoo ehci_hcd
- [ 0.591121] usb usb1: SerialNumber: 0000:00:12.2
- [ 0.591826] usb usb1: usb_probe_device
- [ 0.591837] usb usb1: configuration #1 chosen from 1 choice
- [ 0.591862] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 0.592235] hub 1-0:1.0: usb_probe_interface
- [ 0.592246] hub 1-0:1.0: usb_probe_interface - got id
- [ 0.592251] hub 1-0:1.0: USB hub found
- [ 0.592277] hub 1-0:1.0: 5 ports detected
- [ 0.592284] hub 1-0:1.0: standalone hub
- [ 0.592287] hub 1-0:1.0: no power switching (usb 1.0)
- [ 0.592291] hub 1-0:1.0: individual port over-current protection
- [ 0.592295] hub 1-0:1.0: power on to power good time: 20ms
- [ 0.592302] hub 1-0:1.0: local power source is good
- [ 0.592428] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 0.592566] ehci-pci 0000:00:13.2: setting latency timer to 64
- [ 0.592573] ehci-pci 0000:00:13.2: EHCI Host Controller
- [ 0.593112] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
- [ 0.593142] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 0.593170] ehci-pci 0000:00:13.2: debug port 1
- [ 0.593181] ehci-pci 0000:00:13.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
- [ 0.593188] ehci-pci 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
- [ 0.593227] ehci-pci 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.593237] ehci-pci 0000:00:13.2: MWI active
- [ 0.593241] ehci-pci 0000:00:13.2: supports USB remote wakeup
- [ 0.593264] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0244000
- [ 0.593277] ehci-pci 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
- [ 0.598959] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 0.599075] usb usb2: default language 0x0409
- [ 0.599089] usb usb2: udev 1, busnum 2, minor = 128
- [ 0.599094] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.599103] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.599112] usb usb2: Product: EHCI Host Controller
- [ 0.599118] usb usb2: Manufacturer: Linux 3.8.13-gentoo ehci_hcd
- [ 0.599125] usb usb2: SerialNumber: 0000:00:13.2
- [ 0.599834] usb usb2: usb_probe_device
- [ 0.599845] usb usb2: configuration #1 chosen from 1 choice
- [ 0.599869] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 0.600240] hub 2-0:1.0: usb_probe_interface
- [ 0.600251] hub 2-0:1.0: usb_probe_interface - got id
- [ 0.600256] hub 2-0:1.0: USB hub found
- [ 0.600282] hub 2-0:1.0: 5 ports detected
- [ 0.600288] hub 2-0:1.0: standalone hub
- [ 0.600292] hub 2-0:1.0: no power switching (usb 1.0)
- [ 0.600296] hub 2-0:1.0: individual port over-current protection
- [ 0.600299] hub 2-0:1.0: power on to power good time: 20ms
- [ 0.600306] hub 2-0:1.0: local power source is good
- [ 0.600432] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 0.600854] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.600873] ohci_hcd: block sizes: ed 80 td 96
- [ 0.600982] ohci_hcd 0000:00:12.0: setting latency timer to 64
- [ 0.600989] ohci_hcd 0000:00:12.0: OHCI Host Controller
- [ 0.601476] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
- [ 0.601509] ohci_hcd 0000:00:12.0: enabled AMD prefetch quirk
- [ 0.601546] ohci_hcd 0000:00:12.0: created debug files
- [ 0.601550] ohci_hcd 0000:00:12.0: supports USB remote wakeup
- [ 0.601587] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0247000
- [ 0.655897] ohci_hcd 0000:00:12.0: OHCI controller state
- [ 0.655911] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers, rh state running
- [ 0.655918] ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3
- [ 0.655924] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0
- [ 0.655931] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF
- [ 0.655937] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 0.655948] ohci_hcd 0000:00:12.0: hcca frame #0005
- [ 0.655954] ohci_hcd 0000:00:12.0: roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5)
- [ 0.655959] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000
- [ 0.655964] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE
- [ 0.655970] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS
- [ 0.655976] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS
- [ 0.655981] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS
- [ 0.655987] ohci_hcd 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS
- [ 0.655992] ohci_hcd 0000:00:12.0: roothub.portstatus [4] 0x00000100 PPS
- [ 0.656022] usb usb3: default language 0x0409
- [ 0.656035] usb usb3: udev 1, busnum 3, minor = 256
- [ 0.656040] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.656054] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.656062] usb usb3: Product: OHCI Host Controller
- [ 0.656069] usb usb3: Manufacturer: Linux 3.8.13-gentoo ohci_hcd
- [ 0.656075] usb usb3: SerialNumber: 0000:00:12.0
- [ 0.656797] usb usb3: usb_probe_device
- [ 0.656809] usb usb3: configuration #1 chosen from 1 choice
- [ 0.656835] usb usb3: adding 3-0:1.0 (config #1, interface 0)
- [ 0.657216] hub 3-0:1.0: usb_probe_interface
- [ 0.657227] hub 3-0:1.0: usb_probe_interface - got id
- [ 0.657232] hub 3-0:1.0: USB hub found
- [ 0.657261] hub 3-0:1.0: 5 ports detected
- [ 0.657267] hub 3-0:1.0: standalone hub
- [ 0.657271] hub 3-0:1.0: no power switching (usb 1.0)
- [ 0.657274] hub 3-0:1.0: no over-current protection
- [ 0.657278] hub 3-0:1.0: power on to power good time: 4ms
- [ 0.657287] hub 3-0:1.0: local power source is good
- [ 0.657354] hub 3-0:1.0: trying to enable port power on non-switchable hub
- [ 0.657427] ehci-pci 0000:00:12.2: HS companion for 0000:00:12.0
- [ 0.657496] ohci_hcd 0000:00:13.0: setting latency timer to 64
- [ 0.657502] ohci_hcd 0000:00:13.0: OHCI Host Controller
- [ 0.658078] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
- [ 0.658113] ohci_hcd 0000:00:13.0: enabled AMD prefetch quirk
- [ 0.658156] ohci_hcd 0000:00:13.0: created debug files
- [ 0.658160] ohci_hcd 0000:00:13.0: supports USB remote wakeup
- [ 0.658179] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0245000
- [ 0.691895] ehci-pci 0000:00:12.2: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.691907] hub 1-0:1.0: port 2: status 0501 change 0001
- [ 0.699885] ehci-pci 0000:00:13.2: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.699897] hub 2-0:1.0: port 2: status 0501 change 0001
- [ 0.712855] ohci_hcd 0000:00:13.0: OHCI controller state
- [ 0.712869] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers, rh state running
- [ 0.712877] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3
- [ 0.712883] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
- [ 0.712890] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
- [ 0.712895] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 0.712906] ohci_hcd 0000:00:13.0: hcca frame #0005
- [ 0.712913] ohci_hcd 0000:00:13.0: roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5)
- [ 0.712918] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
- [ 0.712923] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
- [ 0.712929] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
- [ 0.712935] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
- [ 0.712940] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
- [ 0.712945] ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
- [ 0.712951] ohci_hcd 0000:00:13.0: roothub.portstatus [4] 0x00000100 PPS
- [ 0.712992] usb usb4: default language 0x0409
- [ 0.713005] usb usb4: udev 1, busnum 4, minor = 384
- [ 0.713010] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.713023] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.713032] usb usb4: Product: OHCI Host Controller
- [ 0.713038] usb usb4: Manufacturer: Linux 3.8.13-gentoo ohci_hcd
- [ 0.713045] usb usb4: SerialNumber: 0000:00:13.0
- [ 0.713740] usb usb4: usb_probe_device
- [ 0.713752] usb usb4: configuration #1 chosen from 1 choice
- [ 0.713776] usb usb4: adding 4-0:1.0 (config #1, interface 0)
- [ 0.714142] hub 4-0:1.0: usb_probe_interface
- [ 0.714153] hub 4-0:1.0: usb_probe_interface - got id
- [ 0.714158] hub 4-0:1.0: USB hub found
- [ 0.714187] hub 4-0:1.0: 5 ports detected
- [ 0.714194] hub 4-0:1.0: standalone hub
- [ 0.714198] hub 4-0:1.0: no power switching (usb 1.0)
- [ 0.714201] hub 4-0:1.0: no over-current protection
- [ 0.714205] hub 4-0:1.0: power on to power good time: 4ms
- [ 0.714214] hub 4-0:1.0: local power source is good
- [ 0.714330] hub 4-0:1.0: trying to enable port power on non-switchable hub
- [ 0.714414] ehci-pci 0000:00:13.2: HS companion for 0000:00:13.0
- [ 0.714797] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.715278] usbcore: registered new interface driver usblp
- [ 0.715295] Initializing USB Mass Storage driver...
- [ 0.715410] usbcore: registered new interface driver usb-storage
- [ 0.715417] USB Mass Storage support registered.
- [ 0.715812] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
- [ 0.742103] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.742129] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.742993] mousedev: PS/2 mouse device common for all mice
- [ 0.744261] rtc_cmos 00:04: RTC can wake from S4
- [ 0.744514] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- [ 0.744575] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
- [ 0.745215] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
- [ 0.745312] cpuidle: using governor ladder
- [ 0.745415] cpuidle: using governor menu
- [ 0.745422] EFI Variables Facility v0.08 2004-May-17
- [ 0.748141] usbcore: registered new interface driver usbhid
- [ 0.748158] usbhid: USB HID core driver
- [ 0.749640] snd_hda_intel 0000:00:14.2: setting latency timer to 64
- [ 0.756643] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0000
- [ 0.757682] hda_codec: CX20590: BIOS auto-probing.
- [ 0.764010] Netfilter messages via NETLINK v0.30.
- [ 0.764049] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 0.764534] ctnetlink v0.93: registering with nfnetlink.
- [ 0.764753] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.764815] TCP: cubic registered
- [ 0.764821] Initializing XFRM netlink socket
- [ 0.765731] NET: Registered protocol family 10
- [ 0.766081] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.766160] sit: IPv6 over IPv4 tunneling driver
- [ 0.767038] NET: Registered protocol family 17
- [ 0.767080] Key type dns_resolver registered
- [ 0.768630] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
- [ 0.768699] PM: Hibernation image not present or could not be loaded.
- [ 0.768731] registered taskstats version 1
- [ 0.769188] Magic number: 1:661:943
- [ 0.769265] tty tty0: hash matches
- [ 0.769272] tty console: hash matches
- [ 0.769321] console [netcon0] enabled
- [ 0.769326] netconsole: network logging started
- [ 0.769423] acpi-cpufreq: overriding BIOS provided _PSD data
- [ 0.769703] ALSA device list:
- [ 0.769710] #0: HDA ATI SB at 0xf0240000 irq 16
- [ 0.791679] hub 1-0:1.0: state 7 ports 5 chg 0004 evt 0000
- [ 0.791715] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
- [ 0.842520] ehci-pci 0000:00:12.2: port 2 reset complete, port enabled
- [ 0.842535] ehci-pci 0000:00:12.2: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.893495] usb 1-2: new high-speed USB device number 2 using ehci-pci
- [ 0.944668] ehci-pci 0000:00:12.2: port 2 reset complete, port enabled
- [ 0.944684] ehci-pci 0000:00:12.2: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.022667] usb 1-2: skipped 1 descriptor after configuration
- [ 1.022678] usb 1-2: skipped 5 descriptors after interface
- [ 1.022684] usb 1-2: skipped 1 descriptor after endpoint
- [ 1.022689] usb 1-2: skipped 7 descriptors after interface
- [ 1.023032] usb 1-2: default language 0x0409
- [ 1.024161] usb 1-2: udev 2, busnum 1, minor = 1
- [ 1.024173] usb 1-2: New USB device found, idVendor=5986, idProduct=0292
- [ 1.024188] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.024197] usb 1-2: Product: Lenovo EasyCamera
- [ 1.024203] usb 1-2: Manufacturer: Bison Corp.
- [ 1.024497] usb 1-2: usb_probe_device
- [ 1.024504] usb 1-2: configuration #1 chosen from 1 choice
- [ 1.025498] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
- [ 1.026553] usb 1-2: adding 1-2:1.1 (config #1, interface 1)
- [ 1.026939] hub 2-0:1.0: state 7 ports 5 chg 0004 evt 0000
- [ 1.026962] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
- [ 1.043544] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.044534] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.046897] ata2.00: ATAPI: SlimtypeDVD A DS8A5SH, XL63, max UDMA/100
- [ 1.048568] ata2.00: configured for UDMA/100
- [ 1.050833] ata1.00: failed to enable AA (error_mask=0x1)
- [ 1.050855] ata1.00: ATA-8: SAMSUNG HM321HI, 2AJ10002, max UDMA/100
- [ 1.050863] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 1.057490] ata1.00: failed to enable AA (error_mask=0x1)
- [ 1.057525] ata1.00: configured for UDMA/100
- [ 1.058028] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM321HI 2AJ1 PQ: 0 ANSI: 5
- [ 1.059480] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 1.059643] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.059653] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.059694] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.059763] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.065469] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A5SH XL63 PQ: 0 ANSI: 5
- [ 1.077528] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.077541] ehci-pci 0000:00:13.2: port 2 reset complete, port enabled
- [ 1.077551] ehci-pci 0000:00:13.2: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.077558] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.078706] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 1.079309] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 1.128483] usb 2-2: new high-speed USB device number 2 using ehci-pci
- [ 1.131672] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
- [ 1.136123] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.179332] ehci-pci 0000:00:13.2: port 2 reset complete, port enabled
- [ 1.179348] ehci-pci 0000:00:13.2: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.243712] usb 2-2: default language 0x0409
- [ 1.244467] usb 2-2: udev 2, busnum 2, minor = 129
- [ 1.244485] usb 2-2: New USB device found, idVendor=0bda, idProduct=0139
- [ 1.244505] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.244514] usb 2-2: Product: USB2.0-CRW
- [ 1.244521] usb 2-2: Manufacturer: Generic
- [ 1.244527] usb 2-2: SerialNumber: 20100201396000000
- [ 1.245176] usb 2-2: usb_probe_device
- [ 1.245188] usb 2-2: configuration #1 chosen from 1 choice
- [ 1.245769] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
- [ 1.246507] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0000
- [ 1.482140] tsc: Refined TSC clocksource calibration: 1596.003 MHz
- [ 1.482167] Switching to clocksource tsc
- [ 2.399686] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 570026
- [ 2.522940] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
- [ 2.530086] md: Waiting for all devices to be available before autodetect
- [ 2.530106] md: If you don't use raid, use raid=noautodetect
- [ 2.531287] md: Autodetecting RAID arrays.
- [ 2.531306] md: Scanned 0 and added 0 devices.
- [ 2.531312] md: autorun ...
- [ 2.531316] md: ... autorun DONE.
- [ 2.554715] EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities
- [ 2.555379] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities
- [ 2.582237] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.582285] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
- [ 2.584233] Freeing unused kernel memory: 624k freed
- [ 2.584537] Write protecting the kernel read-only data: 12288k
- [ 2.593399] Freeing unused kernel memory: 1520k freed
- [ 2.605860] Freeing unused kernel memory: 2040k freed
- [ 3.199787] kbd_mode (869) used greatest stack depth: 5568 bytes left
- [ 3.235113] loadkeys (870) used greatest stack depth: 5064 bytes left
- [ 3.235651] init-early.sh (868) used greatest stack depth: 4776 bytes left
- [ 3.397412] rm (880) used greatest stack depth: 4600 bytes left
- [ 3.929053] runscript.sh (890) used greatest stack depth: 4408 bytes left
- [ 4.414276] systemd-udevd[984]: starting version 200
- [ 4.588504] udevadm (996) used greatest stack depth: 4256 bytes left
- [ 4.796100] Linux agpgart interface v0.103
- [ 4.801618] [drm] Initialized drm 1.1.0 20060810
- [ 4.845846] [drm] radeon defaulting to kernel modesetting.
- [ 4.845854] [drm] radeon kernel modesetting enabled.
- [ 4.846231] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x17AA:0x397C).
- [ 4.846306] [drm] register mmio base: 0xF0200000
- [ 4.846309] [drm] register mmio size: 262144
- [ 4.847152] ATOM BIOS: Lenovo
- [ 4.847203] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
- [ 4.847208] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
- [ 4.847414] [drm] Detected VRAM RAM=384M, BAR=256M
- [ 4.847423] [drm] RAM width 32bits DDR
- [ 4.847547] [TTM] Zone kernel: Available graphics memory: 1821534 kiB
- [ 4.847550] [TTM] Initializing pool allocator
- [ 4.847558] [TTM] Initializing DMA pool allocator
- [ 4.847616] [drm] radeon: 384M of VRAM memory ready
- [ 4.847619] [drm] radeon: 512M of GTT memory ready.
- [ 4.847652] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 4.847655] [drm] Driver supports precise vblank timestamp query.
- [ 4.847750] radeon 0000:00:01.0: irq 40 for MSI/MSI-X
- [ 4.847768] radeon 0000:00:01.0: radeon: using MSI.
- [ 4.847813] [drm] radeon: irq initialized.
- [ 4.847823] [drm] GART: num cpu pages 131072, num gpu pages 131072
- [ 4.850035] [drm] Loading PALM Microcode
- [ 4.906183] atl1c 0000:02:00.0: version 1.0.1.1-NAPI
- [ 5.015726] systemd-udevd[1002]: renamed network interface eth0 to enp2s0
- [ 5.061557] ath: phy0: ASPM enabled: 0x42
- [ 5.061568] ath: EEPROM regdomain: 0x65
- [ 5.061570] ath: EEPROM indicates we should expect a direct regpair map
- [ 5.061576] ath: Country alpha2 being used: 00
- [ 5.061579] ath: Regpair used: 0x65
- [ 5.063586] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
- [ 5.063958] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90004820000, irq=17
- [ 5.141600] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
- [ 5.141820] radeon 0000:00:01.0: WB enabled
- [ 5.141828] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff88010130bc00
- [ 5.141833] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff88010130bc0c
- [ 5.159213] [drm] ring test on 0 succeeded in 1 usecs
- [ 5.159286] [drm] ring test on 3 succeeded in 1 usecs
- [ 5.160166] [drm] ib test on ring 0 succeeded in 0 usecs
- [ 5.160207] [drm] ib test on ring 3 succeeded in 0 usecs
- [ 5.186811] systemd-udevd[1002]: renamed network interface wlan0 to wlp3s0
- [ 5.212613] [drm] radeon atom DIG backlight initialized
- [ 5.212633] [drm] Radeon Display Connectors
- [ 5.212638] [drm] Connector 0:
- [ 5.212643] [drm] LVDS-1
- [ 5.212646] [drm] HPD1
- [ 5.212650] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
- [ 5.212652] [drm] Encoders:
- [ 5.212655] [drm] LCD1: INTERNAL_UNIPHY
- [ 5.212657] [drm] Connector 1:
- [ 5.212660] [drm] HDMI-A-1
- [ 5.212662] [drm] HPD2
- [ 5.212665] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
- [ 5.212667] [drm] Encoders:
- [ 5.212669] [drm] DFP1: INTERNAL_UNIPHY
- [ 5.212671] [drm] Connector 2:
- [ 5.212673] [drm] VGA-1
- [ 5.212676] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
- [ 5.212678] [drm] Encoders:
- [ 5.212681] [drm] CRT1: INTERNAL_KLDSCP_DAC1
- [ 5.212746] [drm] Internal thermal controller without fan control
- [ 5.212851] [drm] radeon: power management initialized
- [ 5.656590] [drm] fb mappable at 0xE0142000
- [ 5.656598] [drm] vram apper at 0xE0000000
- [ 5.656600] [drm] size 4325376
- [ 5.656603] [drm] fb depth is 24
- [ 5.656605] [drm] pitch is 5632
- [ 5.656884] fbcon: radeondrmfb (fb0) is primary device
- [ 6.175796] Console: switching to colour frame buffer device 170x48
- [ 6.181824] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
- [ 6.181829] radeon 0000:00:01.0: registered panic notifier
- [ 6.182139] [drm] Initialized radeon 2.29.0 20080528 for 0000:00:01.0 on minor 0
- [ 7.483879] usbcore: registered new interface driver synaptics_usb
- [ 7.772955] EXT4-fs (sda3): re-mounted. Opts: (null)
- [ 9.978723] atl1c 0000:02:00.0: irq 41 for MSI/MSI-X
- [ 9.991078] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 10.404146] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 11.567777] udevd (1003) used greatest stack depth: 3024 bytes left
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement