API tools faq
paste
Advertisement
Guest User

Stuck

a guest
Nov 4th, 2014
149
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.19 KB | None | 0 0
raw download clone embed print report
  1. Uncompressing Linux... done, booting the kernel.
  2. [ 0.000000] Booting Linux on physical CPU 0x0
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Initializing cgroup subsys cpuacct
  5. [ 0.000000] Linux version 3.12.31+ (dc4@dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #720 PREEMPT Sat Nov 1 13:15:06 GMT 2014
  6. [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  7. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  8. [ 0.000000] Machine: BCM2708
  9. [ 0.000000] cma: CMA: reserved 8 MiB at 1e800000
  10. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  11. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
  12. [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0x1000010 bcm2708.serial=0xab7cbca1 smsc95xx.macaddr=B8:27:EB:7C:BC:A1 bcm2708_fb.fbswap=1 bcm2708.disk_led_gpio=47 bcm2708.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1fa00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
  13. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  14. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  15. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  16. [ 0.000000] Memory: 488268K/507904K available (4522K kernel code, 243K rwdata, 1352K rodata, 143K init, 701K bss, 19636K reserved)
  17. [ 0.000000] Virtual kernel memory layout:
  18. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  19. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  20. [ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
  21. [ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
  22. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  23. [ 0.000000] .text : 0xc0008000 - 0xc05c4c8c (5876 kB)
  24. [ 0.000000] .init : 0xc05c5000 - 0xc05e8fd4 ( 144 kB)
  25. [ 0.000000] .data : 0xc05ea000 - 0xc0626c20 ( 244 kB)
  26. [ 0.000000] .bss : 0xc0626c2c - 0xc06d6428 ( 702 kB)
  27. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  28. [ 0.000000] Preemptible hierarchical RCU implementation.
  29. [ 0.000000] NR_IRQS:394
  30. [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  31. [ 0.000000] Switching to timer-based delay loop
  32. [ 0.000000] Console: colour dummy device 80x30
  33. [ 0.000000] console [tty1] enabled
  34. [ 0.001182] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
  35. [ 0.001238] pid_max: default: 32768 minimum: 301
  36. [ 0.001746] Mount-cache hash table entries: 512
  37. [ 0.002601] Initializing cgroup subsys memory
  38. [ 0.002712] Initializing cgroup subsys devices
  39. [ 0.002748] Initializing cgroup subsys freezer
  40. [ 0.002779] Initializing cgroup subsys blkio
  41. [ 0.002924] CPU: Testing write buffer coherency: ok
  42. [ 0.003376] Setting up static identity map for 0xc044ef98 - 0xc044eff4
  43. [ 0.005318] devtmpfs: initialized
  44. [ 0.021524] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  45. [ 0.023108] NET: Registered protocol family 16
  46. [ 0.028460] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  47. [ 0.029112] cpuidle: using governor ladder
  48. [ 0.029160] cpuidle: using governor menu
  49. [ 0.029584] bcm2708.uart_clock = 0
  50. [ 0.031577] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  51. [ 0.031634] hw-breakpoint: maximum watchpoint size is 4 bytes.
  52. [ 0.031668] mailbox: Broadcom VideoCore Mailbox driver
  53. [ 0.031764] bcm2708_vcio: mailbox at f200b880
  54. [ 0.031872] bcm_power: Broadcom power driver
  55. [ 0.031910] bcm_power_open() -> 0
  56. [ 0.031934] bcm_power_request(0, 8)
  57. [ 0.532653] bcm_mailbox_read -> 00000080, 0
  58. [ 0.532695] bcm_power_request -> 0
  59. [ 0.532948] Serial: AMBA PL011 UART driver
  60. [ 0.533116] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
  61. [ 0.898622] console [ttyAMA0] enabled
  62. [ 0.925535] bio: create slab <bio-0> at 0
  63. [ 0.931070] SCSI subsystem initialized
  64. [ 0.935062] usbcore: registered new interface driver usbfs
  65. [ 0.940768] usbcore: registered new interface driver hub
  66. [ 0.946333] usbcore: registered new device driver usb
  67. [ 0.952913] Switched to clocksource stc
  68. [ 0.957191] FS-Cache: Loaded
  69. [ 0.960365] CacheFiles: Loaded
  70. [ 0.976206] NET: Registered protocol family 2
  71. [ 0.982116] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  72. [ 0.989533] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  73. [ 0.996128] TCP: Hash tables configured (established 4096 bind 4096)
  74. [ 1.002573] TCP: reno registered
  75. [ 1.005869] UDP hash table entries: 256 (order: 0, 4096 bytes)
  76. [ 1.011738] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  77. [ 1.018521] NET: Registered protocol family 1
  78. [ 1.023513] RPC: Registered named UNIX socket transport module.
  79. [ 1.029472] RPC: Registered udp transport module.
  80. [ 1.034287] RPC: Registered tcp transport module.
  81. [ 1.039011] RPC: Registered tcp NFSv4.1 backchannel transport module.
  82. [ 1.046379] bcm2708_dma: DMA manager at f2007000
  83. [ 1.051140] bcm2708_gpio: bcm2708_gpio_probe c05f7f10
  84. [ 1.056720] vc-mem: phys_addr:0x00000000 mem_base=0x1fa00000 mem_size:0x20000000(512 MiB)
  85. [ 1.066284] audit: initializing netlink socket (disabled)
  86. [ 1.071784] type=2000 audit(0.910:1): initialized
  87. [ 1.242132] VFS: Disk quotas dquot_6.5.2
  88. [ 1.246507] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  89. [ 1.255461] FS-Cache: Netfs 'nfs' registered for caching
  90. [ 1.262358] NFS: Registering the id_resolver key type
  91. [ 1.267647] Key type id_resolver registered
  92. [ 1.271856] Key type id_legacy registered
  93. [ 1.276670] msgmni has been set to 969
  94. [ 1.282442] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  95. [ 1.290310] io scheduler noop registered
  96. [ 1.294397] io scheduler deadline registered (default)
  97. [ 1.299897] io scheduler cfq registered
  98. [ 1.305112] BCM2708FB: allocated DMA memory 5ec00000
  99. [ 1.310158] BCM2708FB: allocated DMA channel 0 @ f2007000
  100. [ 1.320175] Console: switching to colour frame buffer device 82x26
  101. [ 1.331245] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
  102. [ 1.340488] uart-pl011 dev:f1: no DMA platform data
  103. [ 1.347584] vc-cma: Videocore CMA driver
  104. [ 1.352891] vc-cma: vc_cma_base = 0x00000000
  105. [ 1.358968] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  106. [ 1.365755] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  107. [ 1.381846] brd: module loaded
  108. [ 1.391584] loop: module loaded
  109. [ 1.396442] vchiq: vchiq_init_state: slot_zero = 0xde800000, is_master = 0
  110. [ 1.405725] Loading iSCSI transport class v2.0-870.
  111. [ 1.413128] usbcore: registered new interface driver smsc95xx
  112. [ 1.420302] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  113. [ 1.627574] Core Release: 2.80a
  114. [ 1.632016] Setting default values for core params
  115. [ 1.638154] Finished setting default values for core params
  116. [ 1.845088] Using Buffer DMA mode
  117. [ 1.849678] Periodic Transfer Interrupt Enhancement - disabled
  118. [ 1.856838] Multiprocessor Interrupt Enhancement - disabled
  119. [ 1.863745] OTG VER PARAM: 0, OTG VER FLAG: 0
  120. [ 1.869401] Dedicated Tx FIFOs mode
  121. [ 1.874540] WARN::dwc_otg_hcd_init:1042: FIQ DMA bounce buffers: virt = 0xdec14000 dma = 0x5ec14000 len=9024
  122. [ 1.887055] FIQ FSM acceleration enabled for :
  123. [ 1.887055] Non-periodic Split Transactions
  124. [ 1.887055] Periodic Split Transactions
  125. [ 1.887055] High-Speed Isochronous Endpoints
  126. [ 1.909016] WARN::hcd_init:473: FIQ at 0xc0327d8c
  127. [ 1.915193] WARN::hcd_init:474: FIQ ASM at 0xc032803c length 36
  128. [ 1.922494] WARN::hcd_init:500: MPHI regs_base at 0xdf806000
  129. [ 1.929539] dwc_otg bcm2708_usb: DWC OTG Controller
  130. [ 1.935804] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  131. [ 1.944468] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  132. [ 1.951282] Init: Port Power? op_state=1
  133. [ 1.956526] Init: Power Port (0)
  134. [ 1.961336] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  135. [ 1.969506] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  136. [ 1.978082] usb usb1: Product: DWC OTG Controller
  137. [ 1.984108] usb usb1: Manufacturer: Linux 3.12.31+ dwc_otg_hcd
  138. [ 1.991233] usb usb1: SerialNumber: bcm2708_usb
  139. [ 1.997915] hub 1-0:1.0: USB hub found
  140. [ 2.003124] hub 1-0:1.0: 1 port detected
  141. [ 2.009287] usbcore: registered new interface driver usb-storage
  142. [ 2.017042] mousedev: PS/2 mouse device common for all mice
  143. [ 2.024627] bcm2835-cpufreq: min=700000 max=1000000 cur=700000
  144. [ 2.031861] bcm2835-cpufreq: switching to governor powersave
  145. [ 2.038880] bcm2835-cpufreq: switching to governor powersave
  146. [ 2.045909] sdhci: Secure Digital Host Controller Interface driver
  147. [ 2.053378] sdhci: Copyright(c) Pierre Ossman
  148. [ 2.059203] DMA channels allocated for the MMC driver
  149. [ 2.103126] Load BCM2835 MMC driver
  150. [ 2.109537] sdhci-pltfm: SDHCI platform and OF driver helper
  151. [ 2.116739] ledtrig-cpu: registered to indicate activity on CPUs
  152. [ 2.125323] hidraw: raw HID events driver (C) Jiri Kosina
  153. [ 2.137656] usbcore: registered new interface driver usbhid
  154. [ 2.144702] usbhid: USB HID core driver
  155. [ 2.154585] TCP: cubic registered
  156. [ 2.161280] Initializing XFRM netlink socket
  157. [ 2.168954] NET: Registered protocol family 17
  158. [ 2.174930] Key type dns_resolver registered
  159. [ 2.185262] registered taskstats version 1
  160. [ 2.190756] vc-sm: Videocore shared memory driver
  161. [ 2.196767] [vc_sm_connected_init]: start
  162. [ 2.202355] vc_vchi_sm_init: failed to open VCHI service (-1)[ 2.208327] Indeed it is in host mode hprt0 = 00021501
  163.  
  164. [ 2.216130] [vc_sm_connected_init]: failed to initialize shared memory service
  165. [ 2.233129] mmc0: host does not support reading read-only switch. assuming write-enable.
  166. [ 2.252947] [vc_sm_connected_init]: end - returning -1
  167. [ 2.261801] mmc0: new high speed SDHC card at address 59b4
  168. [ 2.273644] Waiting for root device /dev/mmcblk0p2...
  169. [ 2.283728] mmcblk0: mmc0:59b4 00000 7.35 GiB
  170. [ 2.304066] mmcblk0: p1 p2
  171. [ 2.436715] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  172. [ 2.447944] usb 1-1: new high-speed USB device number 2 using dwc_otg
  173. [ 2.456060] VFS: Mounted root (ext4 filesystem) on device 179:2.
  174. [ 2.463853] Indeed it is in host mode hprt0 = 00001101
  175. [ 2.474958] devtmpfs: mounted
  176. [ 2.479956] Freeing unused kernel memory: 140K (c05c5000 - c05e8000)
  177. [ 2.683617] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  178. [ 2.695114] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  179. [ 2.705327] hub 1-1:1.0: USB hub found
  180. [ 2.710863] hub 1-1:1.0: 5 ports detected
  181. [ 2.993224] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  182. [ 3.123551] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  183. [ 3.134600] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  184. [ 3.150041] smsc95xx v1.0.4
  185. [ 3.235152] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:7c:bc:a1
  186. [ 3.343267] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
  187. [ 3.453917] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0179
  188. [ 3.462506] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  189. [ 3.489553] usb 1-1.3: Product: 802.11n NIC
  190. [ 3.503207] usb 1-1.3: Manufacturer: Realtek
  191. [ 3.509071] usb 1-1.3: SerialNumber: 00E04C81A0A1
  192. [ 3.623203] usb 1-1.5: new high-speed USB device number 5 using dwc_otg
  193. [ 3.754804] usb 1-1.5: New USB device found, idVendor=05e3, idProduct=0608
  194. [ 3.773109] usb 1-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  195. [ 3.782003] usb 1-1.5: Product: USB2.0 Hub
  196. [ 3.804121] hub 1-1.5:1.0: USB hub found
  197. [ 3.813091] hub 1-1.5:1.0: 4 ports detected
  198. [ 4.103427] usb 1-1.5.1: new high-speed USB device number 6 using dwc_otg
  199. [ 4.214820] usb 1-1.5.1: New USB device found, idVendor=05e3, idProduct=0608
  200. [ 4.233112] usb 1-1.5.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  201. [ 4.253132] usb 1-1.5.1: Product: USB2.0 Hub
  202. [ 4.268187] hub 1-1.5.1:1.0: USB hub found
  203. [ 4.277784] hub 1-1.5.1:1.0: 4 ports detected
  204. [ 4.310064] udevd[157]: starting version 175
  205. [ 4.364167] usb 1-1.5.2: new high-speed USB device number 7 using dwc_otg
  206. [ 4.487804] usb 1-1.5.2: New USB device found, idVendor=152d, idProduct=2329
  207. [ 4.517069] usb 1-1.5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
  208. [ 4.550090] usb 1-1.5.2: Product: USB to ATA/ATAPI bridge
  209. [ 4.573068] usb 1-1.5.2: Manufacturer: JMicron
  210. [ 4.579071] usb 1-1.5.2: SerialNumber: 583546904
  211. [ 4.610581] usb-storage 1-1.5.2:1.0: USB Mass Storage device detected
  212. [ 4.634727] usb-storage 1-1.5.2:1.0: Quirks match for vid 152d pid 2329: 8020
  213. [ 4.664218] scsi0 : usb-storage 1-1.5.2:1.0
  214. [ 5.711606] scsi 0:0:0:0: Direct-Access TOSHIBA MK2546GSX LB01 PQ: 0 ANSI: 2 CCS
  215. [ 5.734642] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
  216. [ 5.763722] sd 0:0:0:0: [sda] Write Protect is off
  217. [ 5.770842] sd 0:0:0:0: [sda] No Caching mode page found
  218. [ 5.783706] sd 0:0:0:0: [sda] Assuming drive cache: write through
  219. [ 5.803880] sd 0:0:0:0: [sda] No Caching mode page found
  220. [ 5.810859] sd 0:0:0:0: [sda] Assuming drive cache: write through
  221. [ 5.902387] sda: sda1 sda2 sda3 sda4
  222. [ 5.916755] sd 0:0:0:0: [sda] No Caching mode page found
  223. [ 5.933089] sd 0:0:0:0: [sda] Assuming drive cache: write through
  224. [ 5.940796] sd 0:0:0:0: [sda] Attached SCSI disk
  225. [ 6.365582] bFWReady == _FALSE call reset 8051...
  226. [ 6.957320] usbcore: registered new interface driver rtl8188eu
  227. [ 7.910547] sd 0:0:0:0: Attached scsi generic sg0 type 0
  228. [ 12.069045] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  229. [ 12.692270] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!