Archphile wlan0 debug

[root@archphile wpa_supplicant]# uname -r
3.12.28-1-ARCH
[root@archphile wpa_supplicant]# lsusb
Bus 001 Device 005: ID 8564:1000
Bus 001 Device 004: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[root@archphile wpa_supplicant]# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: ifb0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 32
    link/ether 42:b0:ce:ef:69:92 brd ff:ff:ff:ff:ff:ff
3: ifb1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 32
    link/ether 92:32:cc:b3:f9:76 brd ff:ff:ff:ff:ff:ff
4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
    link/ether b8:27:eb:ed:63:6e brd ff:ff:ff:ff:ff:ff
5: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT group default qlen 1000
    link/ether 80:1f:02:f7:3a:71 brd ff:ff:ff:ff:ff:ff
[root@archphile wpa_supplicant]# ip link set wlan0 up
[root@archphile wpa_supplicant]# cat /etc/wpa_supplicant/wpa_supplicant.confap_scan=2
network={
	ssid="rjanet"
	scan_ssid=1
  	proto=RSN
  	key_mgmt=WPA-PSK
  	pairwise=CCMP
  	group=CCMP
        psk=98405a09c8f2e2e37c920acf58ae202286a665bd2e0ec392ff71f51e9712e3b3
}
[root@archphile wpa_supplicant]# wpa_supplicant -B -i wlan0 -Dwext -c /etc/wpa_supplicant/wpa_supplicant.conf
Successfully initialized wpa_supplicant
ioctl[SIOCSIWAP]: Operation not permitted
ioctl[SIOCSIWENCODEEXT]: Invalid argument
ioctl[SIOCSIWENCODEEXT]: Invalid argument
[root@archphile wpa_supplicant]#