API tools faq
paste
Advertisement
Mafarricos

Untitled

Mafarricos
Jun 22nd, 2015
76
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 72.85 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000@0] Booting Linux on physical CPU 0x200
  2. [ 0.000000@0] Linux version 3.10.33 (kszaq@FPGAWorker) (gcc version 4.9.2 (GCC) ) #1 SMP Tue Jun 23 00:22:35 CEST 2015
  3. [ 0.000000@0] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
  4. [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000@0] Machine: Amlogic Meson8B, model: AMLOGIC
  6. [ 0.000000@0] physical memory start address is 0x200000
  7. [ 0.000000@0] reserved_end is dffffff
  8. [ 0.000000@0]
  9. [ 0.000000@0] Total memory is 1022 MiB
  10. [ 0.000000@0] Reserved low memory from 0x06000000 to 0x0dffffff, size: 128 MiB
  11. [ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB)
  12. [ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB)
  13. [ 0.000000@0] deinterlace0(high) : 0x3df00000 - 0x40000000 ( 33 MiB)
  14. [ 0.000000@0] mesonstream0(low) : 0x07a00000 - 0x09a00000 ( 32 MiB)
  15. [ 0.000000@0] vdec0(low) : 0x09a00000 - 0x0da00000 ( 64 MiB)
  16. [ 0.000000@0] ppmgr0(high) : 0x3cf00000 - 0x3df00000 ( 16 MiB)
  17. [ 0.000000@0] amvideocap0(low) : 0x0da00000 - 0x0e000000 ( 6 MiB)
  18. [ 0.000000@0] get storage device: storage 1
  19. [ 0.000000@0] value=1
  20. [ 0.000000@0] get_storage_device : get storage device: storage 1
  21. [ 0.000000@0] get_storage_device : value=1
  22. [ 0.000000@0] [get_storage_device] storage_flag=1
  23. [ 0.000000@0] [get_storage_device] the storage device does NOT relate to eMMC, storage_flag=1
  24. [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
  25. [ 0.000000@0] On node 0 totalpages: 212736
  26. [ 0.000000@0] free_area_init_node: node 0, pgdat c0839f00, node_mem_map c0a7e000
  27. [ 0.000000@0] Normal zone: 1520 pages used for memmap
  28. [ 0.000000@0] Normal zone: 0 pages reserved
  29. [ 0.000000@0] Normal zone: 158208 pages, LIFO batch:31
  30. [ 0.000000@0] HighMem zone: 426 pages used for memmap
  31. [ 0.000000@0] HighMem zone: 54528 pages, LIFO batch:15
  32. [ 0.000000@0] Meson chip version = RevA (1B:A - 0:B72)
  33. [ 0.000000@0] PERCPU: Embedded 7 pages/cpu @c1228000 s7680 r8192 d12800 u32768
  34. [ 0.000000@0] pcpu-alloc: s7680 r8192 d12800 u32768 alloc=8*4096
  35. [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  36. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 211216
  37. [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200n8 no_console_suspend storage=1 cvbsdrv=0 vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full hdmimode=720p cvbsmode=576cvbs androidboot.firstboot=1 hdmitx= boot=/dev/system disk=/dev/data BOOT_IMAGE=/dev/boot console=tty0 consoleblank=0 scaling_governor=ondemand scaling_min_freq=96000 scaling_max_freq=1536000 systemd.show_status=auto hdmitx=cecf
  38. [ 0.000000@0] cvbs performance line = 0
  39. [ 0.000000@0] cvbs trimming line = 0xa000
  40. [ 0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0
  41. [ 0.000000@0] osd1:1
  42. [ 0.000000@0] loaded:268435459
  43. [ 0.000000@0] logo has been loaded
  44. [ 0.000000@0] 720p:11
  45. [ 0.000000@0] full:2
  46. [ 0.000000@0] kernel get hdmimode form uboot is 720p
  47. [ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs
  48. [ 0.000000@0] hdmitx: cec: Function List: enable, one touch play, one touch standby, auto power by tv
  49. [ 0.000000@0] hdmitx: cec: HDMI aml_read_reg32(P_AO_DEBUG_REG0):0xf
  50. [ 0.000000@0] hdmitx: cec: HDMI hdmi_cec_func_config:0xf
  51. [ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
  52. [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  53. [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  54. [ 0.000000@0] Memory: 64MB 16MB 751MB = 831MB total
  55. [ 0.000000@0] Memory: 827996k/827996k available, 22948k reserved, 218112K highmem
  56. [ 0.000000@0] Virtual kernel memory layout:
  57. [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  58. [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  59. [ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  60. [ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  61. [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  62. [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  63. [ 0.000000@0] .text : 0xc0008000 - 0xc07a4f8c (7796 kB)
  64. [ 0.000000@0] .init : 0xc07a5000 - 0xc07dae00 ( 216 kB)
  65. [ 0.000000@0] .data : 0xc07dc000 - 0xc083ad58 ( 380 kB)
  66. [ 0.000000@0] .bss : 0xc083ad58 - 0xc0a79ae4 (2300 kB)
  67. [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  68. [ 0.000000@0] Hierarchical RCU implementation.
  69. [ 0.000000@0] RCU debugfs-based tracing is enabled.
  70. [ 0.000000@0] NR_IRQS:256
  71. [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  72. [ 0.000000@0] Global timer: MESON TIMER-F (c07f6040) initialized
  73. [ 0.000000@0] Switching to timer-based delay loop
  74. [ 0.000000@0] Console: colour dummy device 80x30
  75. [ 0.000000@0] console [tty0] enabled
  76. [ 0.000000@0] meson_serial_console_setup
  77. [ 0.000000@0] console [ttyS0] enabled
  78. [ 0.389932@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
  79. [ 0.400226@0] pid_max: default: 32768 minimum: 301
  80. [ 0.405236@0] Mount-cache hash table entries: 512
  81. [ 0.410941@0] CPU: Testing write buffer coherency: ok
  82. [ 0.415092@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
  83. [ 0.420605@0] Setting up static identity map for 0xc059bcc0 - 0xc059bd18
  84. [ 0.427262@0] L310 cache controller enabled
  85. [ 0.431330@0] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c9, Cache size: 524288 B
  86. [ 0.438729@0] AUX_CTRL 0x7ec60001, PERFETCH_CTRL 0x75000007, POWER_CTRL 0x00000000
  87. [ 0.446876@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
  88. [ 0.454068@1] CPU1: Booted secondary processor
  89. [ 0.454091@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
  90. [ 0.454528@2] CPU2: Booted secondary processor
  91. [ 0.454551@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
  92. [ 0.454980@3] CPU3: Booted secondary processor
  93. [ 0.455002@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
  94. [ 0.455112@0] Brought up 4 CPUs
  95. [ 0.486890@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
  96. [ 0.493114@0] CPU: All CPU(s) started in SVC mode.
  97. [ 0.498679@0] devtmpfs: initialized
  98. [ 0.510344@0] clkrate [ xtal ] : 24000000
  99. [ 0.510397@0] clkrate [ pll_sys ] : 792000000
  100. [ 0.513242@0] clkrate [ pll_fixed ] : 2550000000
  101. [ 0.517917@0] clkrate [ pll_vid ] : 366000000
  102. [ 0.522347@0] clkrate [ pll_ddr ] : 0
  103. [ 0.526057@0] clkrate [ a9_clk ] : 792000000
  104. [ 0.530397@0] clkrate [ clk81 ] : 159375000
  105. [ 0.535744@0] pinctrl core: initialized pinctrl subsystem
  106. [ 0.540613@0] regulator-dummy: no parameters
  107. [ 0.544624@0] NET: Registered protocol family 16
  108. [ 0.553601@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  109. [ 0.558968@0] VPU driver version: v02
  110. [ 0.559568@0] load vpu_clk in dts: 182150000Hz(3)
  111. [ 0.564380@0] vpu_probe OK
  112. [ 0.575640@0] amlogic_gpio gpio: Probed amlogic GPIO driver
  113. [ 0.576447@0] register lm device lm-root
  114. [ 0.579648@0] register lm device lm1
  115. [ 0.583224@0] register lm device lm0
  116. [ 0.587016@0] Init pinux probe!
  117. [ 0.590643@0] pinmux-m8b pinmux: Probed amlogic pinctrl driver
  118. [ 0.595896@0] -------early_init_dt_init:115----------
  119. [ 0.600554@0] tv_init_module
  120. [ 0.603397@0] major number 254 for disp
  121. [ 0.607197@0] vout_register_server
  122. [ 0.610585@0] register tv module server ok
  123. [ 0.614822@0] aml_i2c version: 20140813
  124. [ 0.618524@0] plat->state_name:default
  125. [ 0.618544@0] master_no = 0, master_regs=fe600500
  126. [ 0.618819@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ef3348a8)
  127. [ 0.624546@0] aml-i2c i2c-AO: aml i2c bus driver.
  128. [ 0.629355@0] plat->state_name:default
  129. [ 0.629376@0] master_no = 2, master_regs=fe1087c0
  130. [ 0.629619@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(ef334ca8)
  131. [ 0.635192@0] aml-i2c i2c-B: aml i2c bus driver.
  132. [ 0.639932@0] plat->state_name:default
  133. [ 0.639954@0] master_no = 3, master_regs=fe1087e0
  134. [ 0.640186@0] aml-i2c i2c-C: add adapter aml_i2c_adap3(ef3350a8)
  135. [ 0.645734@0] aml-i2c i2c-C: aml i2c bus driver.
  136. [ 0.650511@0] plat->state_name:default
  137. [ 0.650532@0] master_no = 4, master_regs=fe108d20
  138. [ 0.650771@0] aml-i2c i2c-D: add adapter aml_i2c_adap4(ef3354a8)
  139. [ 0.656297@0] aml-i2c i2c-D: aml i2c bus driver.
  140. [ 0.661217@0] call aml_dvfs_init in
  141. [ 0.664423@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs
  142. [ 0.664437@0] [DVFS]dvfs table of vcck_dvfs is:
  143. [ 0.664448@0] [DVFS] freq, min_uV, max_uV
  144. [ 0.664458@0] [DVFS] 96000, 860000, 860000
  145. [ 0.664467@0] [DVFS] 192000, 860000, 860000
  146. [ 0.664476@0] [DVFS] 312000, 860000, 860000
  147. [ 0.664485@0] [DVFS] 408000, 860000, 860000
  148. [ 0.664494@0] [DVFS] 504000, 860000, 860000
  149. [ 0.664503@0] [DVFS] 600000, 860000, 860000
  150. [ 0.664512@0] [DVFS] 720000, 860000, 860000
  151. [ 0.664522@0] [DVFS] 816000, 900000, 900000
  152. [ 0.664531@0] [DVFS] 1008000, 920000, 920000
  153. [ 0.664540@0] [DVFS] 1200000, 970000, 970000
  154. [ 0.664549@0] [DVFS] 1320000, 1100000, 1100000
  155. [ 0.664558@0] [DVFS] 1488000, 1100000, 1100000
  156. [ 0.664568@0] [DVFS] 1536000, 1140000, 1140000
  157. [ 0.664857@0] hdmitx: system: amhdmitx_init
  158. [ 0.668503@0] hdmitx: system: Ver: 2014May6
  159. [ 0.672800@0] hdmitx: system: amhdmitx_probe
  160. [ 0.677801@0] hdmitx: system: gate/pwr cmd: 7
  161. [ 0.681261@0] hdmitx: system: ALREADY init VIC = 4
  162. [ 0.685992@0] hdmitx: system: gate/pwr cmd: 0
  163. [ 0.690797@1] hdmitx: system: reset intr mask
  164. [ 0.714142@0] hdmitx: system: irq 1
  165. [ 0.778706@0] bio: create slab <bio-0> at 0
  166. [ 0.780004@0] SCSI subsystem initialized
  167. [ 0.781915@0] usbcore: registered new interface driver usbfs
  168. [ 0.787000@0] usbcore: registered new interface driver hub
  169. [ 0.792471@0] usbcore: registered new device driver usb
  170. [ 0.798624@0] mode is 11,sync_duration_den=1,sync_duration_num=60
  171. [ 0.803556@0] request vpu clk holdings: vencp 106250000Hz
  172. [ 0.808885@0] TV mode 720p selected.
  173. [ 0.812453@0] already display in uboot
  174. [ 0.821006@0] call aml_pmu_probe_init in
  175. [ 0.821416@0] get property: use_pwm, value:0x00000001, dec: 1
  176. [ 0.824555@1] hdmitx: system: gate/pwr cmd: 4
  177. [ 0.832115@0] get property: table_count, value:0x0000001d, dec: 29
  178. [ 0.839809@0] meson_cs_dvfs_probe, table count:29, use_pwm:1, pwm controller:2
  179. [ 0.846993@0] 0, 001c0000, 860000
  180. [ 0.850454@0] 1, 001b0001, 870000
  181. [ 0.853915@0] 2, 001a0002, 880000
  182. [ 0.857372@0] 3, 00190003, 890000
  183. [ 0.860845@0] 4, 00180004, 900000
  184. [ 0.864299@0] 5, 00170005, 910000
  185. [ 0.867768@0] 6, 00160006, 920000
  186. [ 0.871235@0] 7, 00150007, 930000
  187. [ 0.874689@0] 8, 00140008, 940000
  188. [ 0.878153@0] 9, 00130009, 950000
  189. [ 0.881626@0] 10, 0012000a, 960000
  190. [ 0.885086@0] 11, 0011000b, 970000
  191. [ 0.888543@0] 12, 0010000c, 980000
  192. [ 0.892016@0] 13, 000f000d, 990000
  193. [ 0.895471@0] 14, 000e000e, 1000000
  194. [ 0.898934@0] 15, 000d000f, 1010000
  195. [ 0.902412@0] 16, 000c0010, 1020000
  196. [ 0.905861@0] 17, 000b0011, 1030000
  197. [ 0.909324@0] 18, 000a0012, 1040000
  198. [ 0.912797@0] 19, 00090013, 1050000
  199. [ 0.916252@0] 20, 00080014, 1060000
  200. [ 0.919720@0] 21, 00070015, 1070000
  201. [ 0.923188@0] 22, 00060016, 1080000
  202. [ 0.926642@0] 23, 00050017, 1090000
  203. [ 0.930115@0] 24, 00040018, 1100000
  204. [ 0.933569@0] 25, 00030019, 1110000
  205. [ 0.937038@0] 26, 0002001a, 1120000
  206. [ 0.940505@0] 27, 0001001b, 1130000
  207. [ 0.943960@0] 28, 0000001c, 1140000
  208. [ 0.947483@0] get pin for pwm--------
  209. [ 0.951083@0] [DVFS]aml_dvfs_register_driver, driver meson-cs-dvfs regist success, mask:1, source id:1
  210. [ 0.951651@0] Advanced Linux Sound Architecture Driver Initialized.
  211. [ 0.959601@0] Switching to clocksource Timer-E
  212. [ 0.979747@0] NET: Registered protocol family 2
  213. [ 0.980408@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  214. [ 0.986037@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  215. [ 0.992601@0] TCP: Hash tables configured (established 8192 bind 8192)
  216. [ 0.999009@0] TCP: reno registered
  217. [ 1.002341@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
  218. [ 1.008400@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  219. [ 1.015178@0] NET: Registered protocol family 1
  220. [ 1.019751@2] RPC: Registered named UNIX socket transport module.
  221. [ 1.022146@1] hdmitx: system: gate/pwr cmd: 5
  222. [ 1.022149@1] hdmitx: edid: edid ready
  223. [ 1.022152@1] hdmitx: system: gate/pwr cmd: 4
  224. [ 1.037834@2] RPC: Registered udp transport module.
  225. [ 1.042668@2] RPC: Registered tcp transport module.
  226. [ 1.047506@2] RPC: Registered tcp NFSv4.1 backchannel transport module.
  227. [ 1.054214@3] wifi_dev_probe
  228. [ 1.056945@3] wifi_dt : interrupt_pin=GPIOX_21
  229. [ 1.061364@3] wifi_dt : irq_num=null
  230. [ 1.064930@3] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
  231. [ 1.070016@3] wifi_dt : power_on_pin=GPIOAO_6
  232. [ 1.074365@3] wifi_dt : power_on_pin2=GPIOX_11
  233. [ 1.078770@3] interrupt_pin=118, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=107
  234. [ 1.087842@3] Unpacking initramfs...
  235. [ 1.107290@3] Freeing initrd memory: 3376K (c4e09000 - c5155000)
  236. [ 1.110208@1] balance_pgdat end zone=0, pgdat_is_balanced=0
  237. [ 1.110347@3] bounce pool size: 64 pages
  238. [ 1.124406@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  239. [ 1.127402@3] NFS: Registering the id_resolver key type
  240. [ 1.130031@3] Key type id_resolver registered
  241. [ 1.134345@3] Key type id_legacy registered
  242. [ 1.140094@3] msgmni has been set to 1197
  243. [ 1.144329@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  244. [ 1.149996@3] io scheduler noop registered (default)
  245. [ 1.154950@3] io scheduler deadline registered
  246. [ 1.159866@3] io scheduler cfq registered
  247. [ 1.172745@3] loop: module loaded
  248. [ 1.172793@3] Loading iSCSI transport class v2.0-870.
  249. [ 1.176596@3] iscsi: registered transport (tcp)
  250. [ 1.181863@3] tun: Universal TUN/TAP device driver, 1.6
  251. [ 1.185167@3] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  252. [ 1.191751@3] PPP generic driver version 2.4.2
  253. [ 1.196346@3] NET: Registered protocol family 24
  254. [ 1.200681@3] usbcore: registered new interface driver smsc95xx
  255. [ 1.206939@3] usbcore: registered new interface driver usb-storage
  256. [ 1.212875@3] mousedev: PS/2 mouse device common for all mice
  257. [ 1.218472@3] i2c /dev entries driver
  258. [ 1.223600@3] hidraw: raw HID events driver (C) Jiri Kosina
  259. [ 1.231421@3] usbcore: registered new interface driver usbhid
  260. [ 1.232162@1] hdmitx: system: gate/pwr cmd: 5
  261. [ 1.232165@1] hdmitx: edid: edid ready
  262. [ 1.232174@1] hdmitx: edid: check sum valid
  263. [ 1.232177@1] hdmitx: edid: check sum valid
  264. [ 1.232182@1] hdmitx: edid: blk0 raw data
  265. [ 1.232225@1] 00ffffffffffff00410c00000101010103140103808048780ae692a3544a9926
  266. [ 1.232263@1] 0f4a4c2108008bc08180a94001010101010101010101023a801871382d40582c
  267. [ 1.232303@1] 450000d05200001e023a80d072382d40102c458000d05200001e000000fc0050
  268. [ 1.232342@1] 68696c697073204654560a20000000fd00303e0f4611000a20202020202001c9
  269. [ 1.232343@1]
  270. [ 1.232346@1] hdmitx: edid: blk1 raw data
  271. [ 1.232386@1] 020331f152101f2022210514041312031102160715060126091f071507508301
  272. [ 1.232424@1] 00006a030c005000382d802e2ee3050301011d803e73382d407e2c458000d052
  273. [ 1.232464@1] 00001e011d80d0721c1620102c258000d05200009e011d00bc52d01e20b82855
  274. [ 1.232503@1] 4000d05200001e011d8018711c1620582c250000d05200009e000000000000e2
  275. [ 1.232504@1]
  276. [ 1.233127@1] hdmitx: edid: find IEEEOUT
  277. [ 1.233216@1] hdmitx: video: get current mode: 720p
  278. [ 1.233227@1] is_similar_hdmi_vic[325] vic_old=4,mode_new=11
  279. [ 1.233232@1] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 4
  280. [ 1.233236@1] hdmitx: audio: audio channel num is 0
  281. [ 1.233242@1] hdmitx: audio: SPDIF
  282. [ 1.233255@1] hdmitx: audio: current VIC: 4
  283. [ 1.233257@1] hdmitx: audio: audio sample rate: 0
  284. [ 1.233260@1] hdmitx: audio: reset audio N para
  285. [ 1.233271@1] hdmitx: audio: PCM out to HDMI
  286. [ 1.254131@1] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
  287. [ 1.254135@1] hdmitx: audio: i2s_to_spdif_flag:1
  288. [ 1.254137@1] hdmitx: audio: Enable audio spdif to HDMI
  289. [ 1.254196@1] hdmitx: cec: CEC not ready
  290. [ 1.384528@3] usbhid: USB HID core driver
  291. [ 1.389165@3] ashmem: initialized
  292. [ 1.392086@3] logger: created 256K log 'log_main'
  293. [ 1.396736@3] logger: created 256K log 'log_events'
  294. [ 1.401566@3] logger: created 256K log 'log_radio'
  295. [ 1.406371@3] logger: created 256K log 'log_system'
  296. [ 1.411029@3] vout_init_module
  297. [ 1.414014@3] start init vout module
  298. [ 1.417802@3] create vout attribute ok
  299. [ 1.422093@3] ge2d_init
  300. [ 1.424072@3] ge2d_dev major:247
  301. [ 1.427743@3] ge2d start monitor
  302. [ 1.430702@3] osd_init
  303. [ 1.430712@1] ge2d workqueue monitor start
  304. [ 1.437212@3] osd_probe, vinfo:c05cf090
  305. [ 1.441391@3] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
  306. [ 1.449109@3] osd_probe, mydef_var:c081b91c, vinfo:c05cf090
  307. [ 1.454645@3] init fbdev bpp is :32
  308. [ 1.458179@3] ---------------clear framebuffer0 memory
  309. [ 1.527968@0] Console: switching to colour frame buffer device 240x67
  310. [ 1.584038@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0600000, size=1024K
  311. [ 1.586762@0] osd_probe, mydef_var:c081b91c, vinfo:c05cf090
  312. [ 1.592324@0] don't find to display_size_default from mesonfb-dts
  313. [ 1.598363@0] init fbdev bpp is :24
  314. [ 1.617212@0] osd probe ok
  315. [ 1.630340@0] DI: di_init
  316. [ 1.630397@0] DI: di_probe
  317. [ 1.631129@0] aml_wdt_driver_init,301
  318. [ 1.631298@0] ** disable watchdog
  319. [ 1.632979@0] keys===========================================
  320. [ 1.638317@0] keys_devno=f400000
  321. [ 1.641954@0] securitykey: device aml_keys created
  322. [ 1.646289@0] amlkeys=0
  323. [ 1.648832@0] platform_driver_register--aml_keys_driver--------------------
  324. [ 1.656158@0] start uart_ao_ttyS0:(irq = 122)
  325. [ 1.659952@0] register uart_ao ok
  326. [ 1.663691@0] start uart_a_ttyS1:(irq = 58)
  327. [ 1.667407@0] register uart_a ok
  328. [ 1.671047@0] set uart_b pinmux use pinctrl subsystem
  329. [ 1.675665@0] P_AO_RTI_PIN_MUX_REG:78025861
  330. [ 1.679825@0] start uart_b_ttyS2:(irq = 107)
  331. [ 1.684053@0] register uart_b ok
  332. [ 1.687655@0] start uart_d_ttyS4:(irq = 126)
  333. [ 1.691470@0] register uart_d ok
  334. [ 1.694985@0] dwc_otg: version 3.10a 12-MAY-2014
  335. [ 1.699310@0] dwc_otg lm-root: dwc_otg_driver_probe(ef3ec200)
  336. [ 1.699322@0] dwc_otg_driver_probe NOT match
  337. [ 1.703596@0] dwc_otg lm1: dwc_otg_driver_probe(ef3ec400)
  338. [ 1.703622@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
  339. [ 1.712132@0] USB (1) use clock source: XTAL input
  340. [ 1.717894@0] dwc_otg lm1: base=0xfe080000
  341. [ 1.717907@0] dwc_otg lm1: dwc_otg_device=0xef5c4180
  342. [ 1.738017@0] Core Release: 3.10a
  343. [ 1.738171@0] Setting default values for core params
  344. [ 1.740766@0] curmode: 1, host_only: 1
  345. [ 1.744524@0] dwc_otg lm1: DMA config: BURST_DEFAULT
  346. [ 1.764745@0] Using Buffer DMA mode
  347. [ 1.764902@0] OTG VER PARAM: 1, OTG VER FLAG: 1
  348. [ 1.767239@0] Working on port type = HOST
  349. [ 1.771314@0] dwc_otg lm1: DWC OTG Controller
  350. [ 1.775626@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
  351. [ 1.782288@0] dwc_otg lm1: irq 63, io mem 0x00000000
  352. [ 1.787156@0] -------hcd->flags.d32 = 0
  353. [ 1.790975@0] Init: Port Power? op_state=1
  354. [ 1.798934@0] Init1: Power Port (0)
  355. [ 1.807043@2] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  356. [ 1.816539@2] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  357. [ 1.826526@2] usb usb1: Product: DWC OTG Controller
  358. [ 1.834810@2] usb usb1: Manufacturer: Linux 3.10.33 dwc_otg_hcd
  359. [ 1.843393@2] usb usb1: SerialNumber: lm1
  360. [ 1.852539@2] hub 1-0:1.0: USB hub found
  361. [ 1.860859@2] hub 1-0:1.0: 1 port detected
  362. [ 1.869458@2] dwc_otg lm0: dwc_otg_driver_probe(ef3ec600)
  363. [ 1.869487@2] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
  364. [ 1.880991@2] USB (0) use clock source: XTAL input
  365. [ 1.890557@2] dwc_otg lm0: base=0xfe040000
  366. [ 1.890572@2] dwc_otg lm0: dwc_otg_device=0xef394540
  367. [ 1.910664@2] Core Release: 3.10a
  368. [ 1.919200@2] Setting default values for core params
  369. [ 1.927874@2] curmode: 1, host_only: 0
  370. [ 1.976588@2] dwc_otg lm0: DMA config: BURST_DEFAULT
  371. [ 1.996805@2] Using Buffer DMA mode
  372. [ 2.005555@2] OTG VER PARAM: 1, OTG VER FLAG: 1
  373. [ 2.014319@2] Working on port type = OTG
  374. [ 2.023090@2] Current port type: SLAVE
  375. [ 2.031936@2] dwc_otg lm0: DWC OTG Controller
  376. [ 2.040766@2] dwc_otg lm0: new USB bus registered, assigned bus number 2
  377. [ 2.050798@2] dwc_otg lm0: irq 62, io mem 0x00000000
  378. [ 2.059859@2] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  379. [ 2.070339@2] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  380. [ 2.081301@2] usb usb2: Product: DWC OTG Controller
  381. [ 2.090530@2] usb usb2: Manufacturer: Linux 3.10.33 dwc_otg_hcd
  382. [ 2.099972@2] usb usb2: SerialNumber: lm0
  383. [ 2.109081@1] Indeed it is in host mode hprt0 = 00021501
  384. [ 2.109823@2] hub 2-0:1.0: USB hub found
  385. [ 2.109842@2] hub 2-0:1.0: 1 port detected
  386. [ 2.110086@2] Dedicated Tx FIFOs mode
  387. [ 2.110239@2] using timer detect id change, ef460800
  388. [ 2.110546@2] boot_device_flag : 1
  389. [ 2.110557@2] ===========================================amlnf_init:642,nand device tree ok,dev-name:nand
  390. [ 2.110567@2] Nand PHY driver Version: 1.01.001.0006 (c) 2013 Amlogic Inc.
  391. [ 2.110574@2] amlnf_phy_init : amlnf init flag 0
  392. [ 2.110659@2] ######STS IRQ mode for nand driver
  393. [ 2.110736@2] NAND device id: 2c 64 44 4b a9 0 0 0
  394. [ 2.110743@2] detect NAND device: B revision NAND 8GiB MT29F64G08CBABA
  395. [ 2.118696@2] AML_NAND_NEW_OOB : new oob
  396. [ 2.118704@2] bus_cycle=6, bus_timing=8,system=3.9ns,flash->T_REA =16,flash->T_RHOH=15
  397. [ 2.118710@2] boot_device_flag = 1
  398. [ 2.119808@2] NAND CKECK : arg nbbt: arg_valid= 1, valid_blk_addr = 5, valid_page_addr = 0
  399. [ 2.121829@3] HOST mode
  400. [ 2.124893@2] NAND CKECK : arg ncnf: arg_valid= 1, valid_blk_addr = 7, valid_page_addr = 0
  401. [ 2.125259@2] nand shipped bbt at block 6
  402. [ 2.142385@2] NAND CKECK : arg nkey: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 0
  403. [ 2.142771@2] i=0,register --- nand_key
  404. [ 2.151806@3] -------hcd->flags.d32 = 0
  405. [ 2.151831@3] Init: Port Power? op_state=1
  406. [ 2.151834@3] Init1: Power Port (0)
  407. [ 2.161875@2] NAND CKECK : arg nenv: arg_valid= 1, valid_blk_addr = 9, valid_page_addr = 54
  408. [ 2.165338@2] nand adjust phy offset : block 4
  409. [ 2.165363@2] nand adjust phy offset : block 4
  410. [ 2.165414@2] nfboot : offset: 0x000000000000 -0x000000800000 : partitons 0 : single_chip single_plane
  411. [ 2.165421@2] nfcache : offset: 0x000006800000 -0x000024800000 : partitons 1 : single_chip multi_plane
  412. [ 2.165427@2] nfcode : offset: 0x00002b000000 -0x000050800000 : partitons 5 : single_chip multi_plane
  413. [ 2.165433@2] nfdata : offset: 0x00007b800000 -0x000184800000 : partitons 1 : single_chip multi_plane
  414. [ 2.165530@2] bad block count = 0
  415. [ 2.165530@2]
  416. [ 2.168609@2] bad block count = 0
  417. [ 2.168609@2]
  418. [ 2.175479@2] bad block count = 0
  419. [ 2.175479@2]
  420. [ 2.208353@2] bad block count = 0
  421. [ 2.208353@2]
  422. [ 2.208356@2] amlnand_add_nftl:
  423. [ 2.208757@2] Creating 1 ntd partitions
  424. [ 2.208763@2] block_num 146
  425. [ 2.211873@2] ------init_ntd
  426. [ 2.212490@2] ntd: Giving out device 0 to nfcache
  427. [ 2.212495@2] Creating 5 ntd partitions
  428. [ 2.212501@2] block_num 322
  429. [ 2.219707@2] ntd: Giving out device 1 to nfcode
  430. [ 2.219713@2] Creating 1 ntd partitions
  431. [ 2.219719@2] block_num 1554
  432. [ 2.252893@2] ntd: Giving out device 2 to nfdata
  433. [ 2.253733@2] boot_device_flag : 1
  434. [ 2.253736@2] register_ntd_blktrans start
  435. [ 2.253742@2] ntd device 250!
  436. [ 2.253745@2] ntd->name: nfcache
  437. [ 2.253753@2] adjust_block_num : 4,reserved_block_ratio 10
  438. [ 2.253760@2] nftl version 140911a
  439. [ 2.253783@2] nftl part attr 0
  440. [ 2.256870@2] size_in_blk 146; total_block 145;
  441. [ 2.256874@2] nftl start:145,17
  442. [ 2.257165@2] first
  443. [ 2.304793@2] average_erase_count:1
  444. [ 2.304800@2] second 131,128
  445. [ 2.304803@2] part->max_discard_block = 4
  446. [ 2.384313@2] all block full!!
  447. [ 2.384315@2] all discard block full!!
  448. [ 2.384397@2] free list:
  449. [ 2.384401@2] free block cnt = 74
  450. [ 2.384406@2] new current block is 24
  451. [ 2.384409@2] total discard page count is 0
  452. [ 2.384415@2] create_part_list:1235,current_used_discard_block=23,current_discard_block_used_count=576
  453. [ 2.385495@2] unmappig_pages=24206,discarded_pages=0,mapping_pages=8562
  454. [ 2.385496@2] nftl ok!
  455. [ 2.386270@2] Enable QUEUE_FLAG_DISCARD for NFTL
  456. [ 2.387040@2] aml_nftl_add_ntd ok
  457. [ 2.387046@2] ntd device 250!
  458. [ 2.387048@2] ntd->name: nfcode
  459. [ 2.387055@2] adjust_block_num : 4,reserved_block_ratio 10
  460. [ 2.387061@2] nftl version 140911a
  461. [ 2.387110@2] nftl part attr 0
  462. [ 2.393992@2] nftl start:322,33
  463. [ 2.394542@2] first
  464. [ 2.499408@2] average_erase_count:1
  465. [ 2.499417@2] second 320,289
  466. [ 2.499420@2] part->max_discard_block = 4
  467. [ 2.695473@2] current_block1:67
  468. [ 2.752463@2] recover_current_block_mapping invalid page data!!
  469. [ 2.753083@2] recover_current_block_mapping invalid page data!!
  470. [ 2.753707@2] recover_current_block_mapping invalid page data!!
  471. [ 2.754342@2] recover_current_block_mapping invalid page data!!
  472. [ 2.754977@2] recover_current_block_mapping invalid page data!!
  473. [ 2.755602@2] recover_current_block_mapping invalid page data!!
  474. [ 2.756163@2] all discard block full!!
  475. [ 2.756432@2] free list:
  476. [ 2.756437@2] free block cnt = 217
  477. [ 2.756441@2] new current block is 261
  478. [ 3.047877@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!
  479. [ 3.141828@3] usb 1-1: new high-speed USB device number 2 using dwc_otg
  480. [ 3.151364@3] Indeed it is in host mode hprt0 = 00001101
  481. [ 3.330290@0] recover_current_block_mapping : fill the current block, from page 255
  482. [ 3.339002@0] total discard page count is 0
  483. [ 3.345733@0] create_part_list:1235,current_used_discard_block=84,current_discard_block_used_count=701
  484. [ 3.358901@0] unmappig_pages=51809,discarded_pages=0,mapping_pages=22175
  485. [ 3.367161@0] nftl ok!
  486. [ 3.375420@3] Enable QUEUE_FLAG_DISCARD for NFTL
  487. [ 3.382844@1] usb 1-1: config 1 interface 0 altsetting 0 has 7 endpoint descriptors, different from the interface descriptor's value: 5
  488. [ 3.383721@3] Enable QUEUE_FLAG_DISCARD for NFTL
  489. [ 3.384537@3] Enable QUEUE_FLAG_DISCARD for NFTL
  490. [ 3.385314@3] Enable QUEUE_FLAG_DISCARD for NFTL
  491. [ 3.386121@3] Enable QUEUE_FLAG_DISCARD for NFTL
  492. [ 3.386781@3] aml_nftl_add_ntd ok
  493. [ 3.386787@3] ntd device 250!
  494. [ 3.386790@3] ntd->name: nfdata
  495. [ 3.386799@3] adjust_block_num : 4,reserved_block_ratio 10
  496. [ 3.386813@3] nftl version 140911a
  497. [ 3.387012@3] nftl part attr 0
  498. [ 3.419851@3] size_in_blk 1554; total_block 1553;
  499. [ 3.419856@3] nftl start:1553,145
  500. [ 3.422209@3] first
  501. [ 3.503527@1] usb 1-1: New USB device found, idVendor=148f, idProduct=5370
  502. [ 3.512586@1] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  503. [ 3.522150@1] usb 1-1: Product: 802.11 n WLAN
  504. [ 3.530004@1] usb 1-1: Manufacturer: Ralink
  505. [ 3.537829@1] usb 1-1: SerialNumber: 1.0
  506. [ 3.548187@1] Indeed it is in host mode hprt0 = 00041901
  507. [ 3.552476@3] found discard block:399
  508. [ 3.741814@1] usb 2-1: new low-speed USB device number 2 using dwc_otg
  509. [ 3.752468@1] Indeed it is in host mode hprt0 = 00041901
  510. [ 3.945280@3] found discard block:1552
  511. [ 3.953806@3] average_erase_count:7
  512. [ 3.962039@3] second 1531,1408
  513. [ 3.970138@3] part->max_discard_block = 4
  514. [ 3.987730@1] usb 2-1: New USB device found, idVendor=04d9, idProduct=a01c
  515. [ 3.997313@1] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  516. [ 4.007405@1] usb 2-1: Product: Wireless USB Device
  517. [ 4.015897@1] usb 2-1: Manufacturer: HOLTEK
  518. [ 4.031868@1] input: HOLTEK Wireless USB Device as /devices/lm0/usb2/2-1/2-1:1.0/input/input0
  519. [ 4.043983@1] hid-generic 0003:04D9:A01C.0001: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-lm0-1/input0
  520. [ 4.073961@1] input: HOLTEK Wireless USB Device as /devices/lm0/usb2/2-1/2-1:1.1/input/input1
  521. [ 4.086593@1] hid-generic 0003:04D9:A01C.0002: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-lm0-1/input1
  522. [ 4.914088@3] current_block1:121
  523. [ 4.925641@3] recover_current_block_mapping invalid page data!!
  524. [ 4.935857@3] recover_current_block_mapping invalid page data!!
  525. [ 4.946015@3] recover_current_block_mapping invalid page data!!
  526. [ 4.956042@3] recover_current_block_mapping invalid page data!!
  527. [ 4.965964@3] recover_current_block_mapping invalid page data!!
  528. [ 4.975873@3] recover_current_block_mapping invalid page data!!
  529. [ 5.162526@3] currnet_discard_block1:399
  530. [ 5.336531@3] reach the last discard page:236
  531. [ 5.363275@3] free list:
  532. [ 5.372329@3] free block cnt = 963
  533. [ 5.381332@3] new current block is 232
  534. [ 5.539370@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!
  535. [ 5.969802@0] recover_current_block_mapping : fill the current block, from page 255
  536. [ 5.981214@0] total discard page count is 491
  537. [ 5.990713@0] create_part_list:1235,current_used_discard_block=399,current_discard_block_used_count=3
  538. [ 6.017663@0] unmappig_pages=244855,discarded_pages=44693,mapping_pages=70900
  539. [ 6.029234@0] nftl ok!
  540. [ 6.040360@2] Enable QUEUE_FLAG_DISCARD for NFTL
  541. [ 6.051318@2] aml_nftl_add_ntd ok
  542. [ 6.061469@2] init_aml_nftl end
  543. [ 6.071585@2] amvideocap_init_module
  544. [ 6.081825@2] amvideocap_probe,amvideocap
  545. [ 6.091845@2] amvideocap_dev_register buf:0da00000,size:600000.
  546. [ 6.102761@2] Amlogic A/V streaming port init
  547. [ 6.115862@2] buffersize=262144,0,start=0
  548. [ 6.125646@2] Subtitle stbuf alloced at 0xee3c0000, size = 262144
  549. [ 6.135849@2] changed the (2) buffer size from 0 to 262144
  550. [ 6.145997@2] init vdec memsource 9a00000->d9fffff
  551. [ 6.155956@2] [tsync_pcr_init]init success.
  552. [ 6.165592@2] regist mpeg12 codec profile
  553. [ 6.175358@2] regist mpeg4 codec profile
  554. [ 6.184497@2] amvdec_vc1 module init
  555. [ 6.193557@2] regist vc1 codec profile
  556. [ 6.202488@2] amvdec_h264 module init
  557. [ 6.211692@2] regist h264 codec profile
  558. [ 6.220808@2] amvdec_h264mvc module init
  559. [ 6.230048@2] regist hmvc codec profile
  560. [ 6.239112@2] amvdec_h265 module init
  561. [ 6.248377@2] regist hevc codec profile
  562. [ 6.257647@2] regist mjpeg codec profile
  563. [ 6.266647@2] amvdec_real module init
  564. [ 6.275841@2] regist real codec profile
  565. [ 6.284811@2] amvdec_avs module init
  566. [ 6.294446@2] alloc_keep_buffer keep_y_addr ede00000
  567. [ 6.303520@2] alloc_keep_buffer keep_u_addr ee400000
  568. [ 6.312413@2] alloc_keep_buffer keep_v_addr ee500000
  569. [ 6.321170@2] yaddr=ede00000,u_addr=ee400000,v_addr=ee500000
  570. [ 6.330601@2] create_ge2d_work_queue video task ok
  571. [ 6.340202@2]
  572. [ 6.340202@2]
  573. [ 6.340202@2] VECM init
  574. [ 6.340202@2]
  575. [ 6.376844@2] efuse===========================================
  576. [ 6.385994@2] efuse: device efuse created
  577. [ 6.394634@2] efuse--------------------------------------------
  578. [ 6.403440@2] SARADC Driver init.
  579. [ 6.412337@2] __saradc_probe__
  580. [ 6.561917@2] saradc calibration: ref_val = 508
  581. [ 6.570393@2] saradc calibration: ref_nominal = 512
  582. [ 6.578810@2] saradc calibration: coef = 4088
  583. [ 6.587660@2] ir irblaster probe
  584. [ 6.596516@2] Remote Driver
  585. [ 6.604749@2] Remote platform_data g_remote_base=fe600580
  586. [ 6.612761@2] set drvdata completed
  587. [ 6.620444@2] device_create_file completed
  588. [ 6.628604@2] input: aml_keypad as /devices/platform/meson-remote/input/input2
  589. [ 6.638168@2] input_register_device completed
  590. [ 6.645629@2] [0xffffff00] = 0x1dd0190
  591. [ 6.653109@2] [0xffffff04] = 0xf800ca
  592. [ 6.660540@2] [0xffffff08] = 0x82006e
  593. [ 6.668005@2] [0xffffff0c] = 0x3c0030
  594. [ 6.675490@2] [0xffffff10] = 0x30fa0013
  595. [ 6.683004@2] [0xffffff18] = 0x6f19000
  596. [ 6.690399@2] [0xffffff1c] = 0xbe40
  597. [ 6.697734@2] [0x0] = 0xfa00a0
  598. [ 6.705019@2] [0x4] = 0xfa00a0
  599. [ 6.712276@2] [0x8] = 0xfa00a0
  600. [ 6.719457@2] [0xc] = 0x640030
  601. [ 6.726450@2] [0x10] = 0x30fa0013
  602. [ 6.733296@2] [0x18] = 0x961b800
  603. [ 6.739969@2] [0x1c] = 0x9740
  604. [ 6.746431@2] [0x20] = 0x104
  605. [ 6.752676@2] [0x24] = 0x0
  606. [ 6.758743@2] [0x28] = 0x0
  607. [ 6.764725@2] set_remote_mode[69]
  608. [ 6.770724@2] remote config major:236
  609. [ 6.777179@2] physical address:0x2eafe000
  610. [ 6.783446@2] Meson KeyInput init
  611. [ 6.789753@2] GPIO Keypad Driver init.
  612. [ 6.795893@2] ==gpio_key_probe==
  613. [ 6.801871@2] reg:2620,clearmask=400040,setmask=1
  614. [ 6.807858@2] reg:2622,clearmask=ff0000,set pin=3
  615. [ 6.813786@2] reg:2623,clearmask=7000000,setmask=7
  616. [ 6.819650@2] reg:2620,clearmask=800080,setmask=10001
  617. [ 6.825467@2] reg:2622,clearmask=ff000000,set pin=3
  618. [ 6.831277@2] reg:2623,clearmask=70000000,setmask=7
  619. [ 6.837092@2] power key(116) registed.
  620. [ 6.837098@0] key 116 up
  621. [ 6.848976@2] input: gpio_keypad as /devices/platform/gpio_keypad.6/input/input3
  622. [ 6.857074@2] gpio keypad register input device completed.
  623. [ 6.863195@2] gpio keypad major:235
  624. [ 6.869810@2] spi_nor_init
  625. [ 6.876130@2] amlogic_spi_nor_probe:
  626. [ 6.882186@2] amlogic_spi->state_name:default
  627. [ 6.888501@2] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated
  628. [ 6.896978@2] check_storage_device : spi boot_device_flag : -1
  629. [ 6.903503@2] spi_nor_probe
  630. [ 6.909786@2] spi_nor_probe 629 boot_device_flag 1 : do not init spi
  631. [ 6.916944@2] spi_nor: probe of apollospi:32766 failed with error -12
  632. [ 6.924244@2] amlogic_spi_nor_probe over
  633. [ 6.930981@2] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  634. [ 6.942233@2] host->base fe108c20
  635. [ 6.949184@2] pdata->caps 7
  636. [ 6.956000@2] pdata->caps2 0
  637. [ 6.962698@2] get property: port, value:0x00000001
  638. [ 6.970362@2] get property: ocr_avail, value:0x00200000
  639. [ 6.978090@2] get property: f_min, value:0x000493e0
  640. [ 6.985846@2] get property: f_max, value:0x02faf080
  641. [ 6.993617@2] get property: f_max_w, value:0x02faf080
  642. [ 7.001262@2] get property: max_req_size, value:0x00020000
  643. [ 7.008860@2] get property: irq_in, value:0x00000003
  644. [ 7.016387@2] get property: irq_out, value:0x00000005
  645. [ 7.023808@2] get property: gpio_cd, str:CARD_6
  646. [ 7.030687@2] get property: pinname, str:sd
  647. [ 7.037190@2] get property: jtag_pin, str:CARD_0
  648. [ 7.044037@2] get property: card_type, value:0x00000005
  649. [ 7.051433@2] get property: gpio_dat3, str:CARD_4
  650. [ 7.091843@0] reg:2620,clearmask=80008,setmask=10001
  651. [ 7.098435@0] reg:2621,clearmask=ff000000,set pin=49
  652. [ 7.104995@0] reg:2623,clearmask=7000,setmask=7
  653. [ 7.111539@0] reg:2620,clearmask=200020,setmask=1
  654. [ 7.118067@0] reg:2622,clearmask=ff00,set pin=49
  655. [ 7.124500@0] reg:2623,clearmask=700000,setmask=7
  656. [ 7.131882@1] pdata->caps 10f
  657. [ 7.138190@1] pdata->caps2 0
  658. [ 7.144493@1] get property: port, value:0x00000000
  659. [ 7.151837@1] get property: ocr_avail, value:0x00200000
  660. [ 7.159178@1] get property: f_min, value:0x000493e0
  661. [ 7.166540@1] get property: f_max, value:0x02faf080
  662. [ 7.173906@1] get property: max_req_size, value:0x00020000
  663. [ 7.181288@1] get property: pinname, str:sdio
  664. [ 7.187995@1] get property: card_type, value:0x00000003
  665. [ 7.311793@3] [aml_sdio_probe] aml_sdio_probe() success!
  666. [ 7.319998@3] host->base fe108e00
  667. [ 7.326924@3] pdata->caps 80000547
  668. [ 7.333746@3] pdata->caps2 0
  669. [ 7.340516@3] get property: port, value:0x00000005
  670. [ 7.348352@3] get property: ocr_avail, value:0x00200000
  671. [ 7.356211@3] get property: f_min, value:0x000493e0
  672. [ 7.364098@3] get property: f_max, value:0x02faf080
  673. [ 7.372009@3] get property: max_req_size, value:0x00020000
  674. [ 7.379908@3] get property: pinname, str:emmc
  675. [ 7.387103@3] get property: card_type, value:0x00000001
  676. [ 7.395013@3] get property: gpio_dat3, str:BOOT_3
  677. [ 7.402382@3] [is_emmc_exist] host->storage_flag=1, POR_BOOT_VALUE=7
  678. [ 7.410178@3] [aml_sdhc_probe]: there is not eMMC/tsd, skip sdhc_c dts config!
  679. [ 7.461793@3] [aml_sdhc_probe] aml_sdhc_probe() success!
  680. [ 7.469253@3] [dsp]DSP start addr 0xc5e00000
  681. [ 7.476554@3] [dsp]register dsp to char divece(257)
  682. [ 7.484742@3] amlogic audio spdif interface device init!
  683. [ 7.492182@3] name=nand_key nand_key
  684. [ 7.499862@3] register_aes_algorithm:488,new way
  685. [ 7.507275@3] unkown current key-name,key_read_show:1396
  686. [ 7.514696@3] get keyexample fail, aml_rtc_probe:750
  687. [ 7.522399@3] rtc clock error
  688. [ 7.530042@3] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
  689. [ 7.537917@3] rtc clock error
  690. [ 7.545276@3] rtc clock error
  691. [ 7.552575@3] rtc clock error
  692. [ 7.562337@3] amaudio2: device amaudio2 created
  693. [ 7.570028@3] Error: Didn't get power valid value --- wifi_power_probe 323
  694. [ 7.578606@3] wifi_power power_gpio is 6
  695. [ 7.585845@3] wifi_power power_gpio2 is 108
  696. [ 7.593573@3] bcmdhd_wlan_init()
  697. [ 7.600663@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[0]=ef4e0c00, size=3760
  698. [ 7.609300@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[1]=ef4e0b40, size=3760
  699. [ 7.617793@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[2]=ef4e0a80, size=3760
  700. [ 7.626066@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[3]=ef4e09c0, size=3760
  701. [ 7.634125@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[4]=ef4e0900, size=3760
  702. [ 7.642139@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[5]=ef4e0840, size=3760
  703. [ 7.650140@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[6]=ef4e0780, size=3760
  704. [ 7.658063@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[7]=ef4e06c0, size=3760
  705. [ 7.665963@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[8]=ef4e0600, size=7856
  706. [ 7.673853@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[9]=ef4e0540, size=7856
  707. [ 7.681705@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[10]=ef4e0480, size=7856
  708. [ 7.689701@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[11]=ef4caa80, size=7856
  709. [ 7.697649@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[12]=ef4ca180, size=7856
  710. [ 7.705559@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[13]=ef4ca240, size=7856
  711. [ 7.713460@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[14]=ef4ca300, size=7856
  712. [ 7.721292@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[15]=ef4ca3c0, size=7856
  713. [ 7.729110@3] 3 bcmdhd_init_wlan_mem: wlan_static_skb[16]=ef4ca480, size=16048
  714. [ 7.737028@2] 4 bcmdhd_init_wlan_mem: wlan_mem_array[0]=ef4e0c00, size=20504
  715. [ 7.744772@2] 4 bcmdhd_init_wlan_mem: wlan_mem_array[1]=ef4e0b40, size=20504
  716. [ 7.752446@2] 4 bcmdhd_init_wlan_mem: wlan_mem_array[2]=ef4e0a80, size=81944
  717. [ 7.759994@2] 4 bcmdhd_init_wlan_mem: wlan_mem_array[3]=ef4e09c0, size=163864
  718. [ 7.767568@2] 4 bcmdhd_init_wlan_mem: wlan_mem_array[4]=ef4e0900, size=20504
  719. [ 7.775028@2] 5 bcmdhd_init_wlan_mem: wlan_static_scan_buf0=ee5f0000, size=65536
  720. [ 7.782851@2] 6 bcmdhd_init_wlan_mem: wlan_static_scan_buf1=edaa0000, size=65536
  721. [ 7.790579@2] bcmdhd_init_wlan_mem: WIFI MEM Allocated
  722. [ 7.796658@2] amlogic rfkill init
  723. [ 7.802783@2] enter bt_probe of_node
  724. [ 7.802802@2] not get gpio_en
  725. [ 7.808844@2] not get gpio_wake
  726. [ 7.842087@2] wifi_request_32k_clk : OFF-->ON for bt_rfkill
  727. [ 7.848234@2] clock_32k_pin(107) : (null)
  728. [ 7.854418@2] clock_32k_pin(107) : sdio_wifi
  729. [ 8.022491@0] UMP: UMP device driver 0000 loaded
  730. [ 8.028752@0] aml_hw_crypto initialization.
  731. [ 8.036630@0] enter rt5616_modinit
  732. [ 8.043368@0] dummy_codec_platform_probe
  733. [ 8.050039@0] == ES8323 == es8323_modinit()
  734. [ 8.057163@0] enter aml_i2s_dai_probe
  735. [ 8.057178@0] i2s get no clk src setting in dts, use the default mpll 0
  736. [ 8.064478@0] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000
  737. [ 8.073630@0] enter aml_pcm_dai_probe
  738. [ 8.073849@0] [aml-spdif-dai]enter aml_dai_spdif_init
  739. [ 8.080385@0] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4
  740. [ 8.088534@0] audio_set_958_clk, freq=4,
  741. [ 8.095231@0] IEC958 16bit
  742. [ 8.102058@0] hdmitx: audio: aout notify rate 48000
  743. [ 8.108865@0] hdmitx: audio: aout notify size 16
  744. [ 8.115640@0] hdmitx: audio: aout notify format CT_PCM
  745. [ 8.122438@2] hdmitx: audio: audio channel num is 1
  746. [ 8.129176@2] hdmitx: audio: SPDIF
  747. [ 8.135790@2] hdmitx: audio: current VIC: 4
  748. [ 8.142277@2] hdmitx: audio: audio sample rate: 3
  749. [ 8.148689@2] hdmitx: audio: reset audio N para
  750. [ 8.155059@2] hdmitx: audio: PCM out to HDMI
  751. [ 8.161368@2] hdmitx: audio: i2s_to_spdif_flag:1
  752. [ 8.167642@2] hdmitx: audio: Enable audio spdif to HDMI
  753. [ 8.173900@2] hdmitx: audio: Audio Type: PCM
  754. [ 8.180133@2] hdmitx: audio: set audio param
  755. [ 8.186367@2] [aml-spdif-dai]aml_spdif_probe
  756. [ 8.192817@2] test codec rt5616
  757. [ 8.198848@2] test_codec_of_node, node rt5616 disable
  758. [ 8.204893@2] test codec rt5631
  759. [ 8.210799@2] test_codec_of_node, node rt5631 disable
  760. [ 8.216871@2] test codec wm8960
  761. [ 8.222950@2] test_codec_of_node, node wm8960 disable
  762. [ 8.229080@2] test codec dummy_codec
  763. [ 8.235082@2] using external codec, index = 4
  764. [ 8.241024@2] using external dummy codec
  765. [ 8.247278@2] enter spdif_dit_probe
  766. [ 8.253245@2] aml_spdif_unmute
  767. [ 8.259389@2] codec_name = dummy_codec.0
  768. [ 8.265623@3] enter aml_set_bias_level level: 1
  769. [ 8.265647@3] enter aml_set_bias_level level: 1
  770. [ 8.265662@3] enter aml_set_bias_level level: 1
  771. [ 8.265681@3] enter aml_set_bias_level level: 2
  772. [ 8.265740@2] enter aml_asoc_init
  773. [ 8.265787@2] p_aml_audio->hp_disable=1
  774. [ 8.271754@2] falied to get spk event delay time paraments from dts file
  775. [ 8.278984@2] spk_event delay_time = 0
  776. [ 8.286091@2] aml-i2s 0:playback preallocate_dma_buffer: area=f08e7000, addr=2de00000, size=524288
  777. [ 8.296279@2] aml-i2s 1:capture preallocate_dma_buffer: area=f05d2000, addr=2df20000, size=65536
  778. [ 8.306212@2] aml_snd_m8 aml_m8_sound_card.4: dummy_codec <-> aml-i2s-dai.0 mapping ok
  779. [ 8.315603@1] enter aml_set_bias_level level: 1
  780. [ 8.315616@1] enter aml_set_bias_level level: 2
  781. [ 8.316557@2] aml-i2s 0:playback preallocate_dma_buffer: area=f0969000, addr=2d800000, size=524288
  782. [ 8.327339@2] aml-i2s 1:capture preallocate_dma_buffer: area=f0782000, addr=2dea0000, size=65536
  783. [ 8.337858@2] aml_snd_m8 aml_m8_sound_card.4: dit-hifi <-> aml-spdif-dai.0 mapping ok
  784. [ 8.347660@1] enter aml_set_bias_level level: 1
  785. [ 8.347671@1] enter aml_set_bias_level level: 2
  786. [ 8.347760@1] enter aml_set_bias_level level: 1
  787. [ 8.347771@1] enter aml_set_bias_level level: 2
  788. [ 8.349395@1] enter aml_set_bias_level level: 1
  789. [ 8.349407@1] enter aml_set_bias_level level: 2
  790. [ 8.349534@2] -----ext_codec=1---
  791. [ 8.357110@2] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0
  792. [ 8.365564@2] TCP: cubic registered
  793. [ 8.374538@2] NET: Registered protocol family 10
  794. [ 8.383189@2] NET: Registered protocol family 17
  795. [ 8.391186@2] Key type dns_resolver registered
  796. [ 8.400112@2] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
  797. [ 8.408994@2] Registering SWP/SWPB emulation handler
  798. [ 8.417215@2] enter meson_pm_init
  799. [ 8.425628@2] enter meson_pm_probe!
  800. [ 8.433886@2] ---meson_pm_probe----set output pin success
  801. [ 8.442293@2] hdmi: cec_pm: cec config:0xf
  802. [ 8.450622@2] meson_pm_probe done !
  803. [ 8.459039@2] AO cpu runs ok.
  804. [ 8.469461@3] console [netcon0] enabled
  805. [ 8.477782@3] netconsole: network logging started
  806. [ 8.486222@3] rtc clock error
  807. [ 8.494628@3] aml_rtc rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
  808. [ 8.505082@3] meson_cpufreq_probe:SYSPLL request to be fixed
  809. [ 8.513685@3] meson_cpufreq: no voltage_control prop
  810. [ 8.522300@3] voltage_control = 0
  811. [ 8.531871@3] hdmitx: cec: CEC init
  812. [ 8.536327@2] hdmitx: cec: CEC task process
  813. [ 8.536550@3] input: cec_input as /devices/virtual/input/input4
  814. [ 8.545555@3] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
  815. [ 8.550911@3] ALSA device list:
  816. [ 8.559685@3] #0: AML-M8AUDIO
  817. [ 8.564384@3] Freeing unused kernel memory: 212K (c07a5000 - c07da000)
  818. [ 8.596584@2] tvmode set to 720p
  819. [ 8.596584@2]
  820. [ 8.596604@2] don't set the same mode as current.
  821. [ 8.671312@2] vfm_map_store:rm default
  822. [ 8.671312@2]
  823. [ 8.671404@2] vfm_map_store:add default decoder ppmgr deinterlace amvideo
  824. [ 8.671404@2]
  825. [ 8.691307@2] aml_nftl_open ok!
  826. [ 8.691548@2] blktrans_ioctl -cmd: 5331,801c0204,64
  827. [ 8.711856@3] aml_nftl_open ok!
  828. [ 8.712113@3] blktrans_ioctl -cmd: 5331,801c0204,64
  829. [ 8.715138@1] aml_nftl_open ok!
  830. [ 8.715215@1] aml_nftl_open ok!
  831. [ 8.745747@1] aml_nftl_open ok!
  832. [ 8.745865@1] aml_nftl_open ok!
  833. [ 8.776169@2] aml_nftl_open ok!
  834. [ 8.777078@2] force enable DISCARD here for ext4 fs
  835. [ 8.777098@2] EXT4-fs (system): couldn't mount as ext3 due to feature incompatibilities
  836. [ 8.777254@2] aml_nftl_open ok!
  837. [ 8.777417@2] force enable DISCARD here for ext4 fs
  838. [ 8.777434@2] EXT4-fs (system): couldn't mount as ext2 due to feature incompatibilities
  839. [ 8.777558@2] aml_nftl_open ok!
  840. [ 8.777704@2] force enable DISCARD here for ext4 fs
  841. [ 8.784257@2] checked enable EXT4 DISCARD here
  842. [ 8.784277@2] EXT4-fs (system): mounted filesystem with ordered data mode. Opts: (null)
  843. [ 9.041360@2] aml_nftl_open ok!
  844. [ 9.042151@2] force enable DISCARD here for ext4 fs
  845. [ 9.042165@2] EXT4-fs (data): couldn't mount as ext3 due to feature incompatibilities
  846. [ 9.042278@2] aml_nftl_open ok!
  847. [ 9.042376@2] force enable DISCARD here for ext4 fs
  848. [ 9.042385@2] EXT4-fs (data): couldn't mount as ext2 due to feature incompatibilities
  849. [ 9.042452@2] aml_nftl_open ok!
  850. [ 9.042534@2] force enable DISCARD here for ext4 fs
  851. [ 9.045235@2] checked enable EXT4 DISCARD here
  852. [ 9.045248@2] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: (null)
  853. [ 9.443034@1] systemd[1]: systemd 217 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
  854. [ 9.443232@1] systemd[1]: Detected architecture 'arm'.
  855. [ 9.443387@1] systemd[1]: Running with unpopulated /etc.
  856. [ 9.443820@1] systemd[1]: Set hostname to <OpenELEC>.
  857. [ 9.444003@1] systemd[1]: Initializing machine ID from random generator.
  858. [ 9.444564@1] systemd[1]: Populated /etc with preset unit settings.
  859. [ 9.453918@1] config uart_ao_ttyS0:: Character length 8bits/char
  860. [ 9.471832@1] Changing uart_ao_ttyS0: baud from 0 to 115200
  861. [ 9.549555@3] systemd[1]: Starting Paths.
  862. [ 9.549993@3] systemd[1]: Reached target Paths.
  863. [ 9.550120@3] systemd[1]: Starting Swap.
  864. [ 9.550222@3] systemd[1]: Reached target Swap.
  865. [ 9.550313@3] systemd[1]: Starting Root Slice.
  866. [ 9.550512@3] systemd[1]: Created slice Root Slice.
  867. [ 9.550611@3] systemd[1]: Starting User and Session Slice.
  868. [ 9.550920@3] systemd[1]: Created slice User and Session Slice.
  869. [ 9.551016@3] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  870. [ 9.551307@3] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  871. [ 9.551403@3] systemd[1]: Starting Delayed Shutdown Socket.
  872. [ 9.551598@3] systemd[1]: Listening on Delayed Shutdown Socket.
  873. [ 9.551693@3] systemd[1]: Starting Journal Socket (/dev/log).
  874. [ 9.551998@3] systemd[1]: Listening on Journal Socket (/dev/log).
  875. [ 9.552128@3] systemd[1]: Starting udev Control Socket.
  876. [ 9.552326@3] systemd[1]: Listening on udev Control Socket.
  877. [ 9.552441@3] systemd[1]: Starting udev Kernel Socket.
  878. [ 9.552627@3] systemd[1]: Listening on udev Kernel Socket.
  879. [ 9.552756@3] systemd[1]: Starting Journal Socket.
  880. [ 9.552991@3] systemd[1]: Listening on Journal Socket.
  881. [ 9.553145@3] systemd[1]: Starting System Slice.
  882. [ 9.553422@3] systemd[1]: Created slice System Slice.
  883. [ 9.553747@3] systemd[1]: Starting Remount Root and Kernel File Systems...
  884. [ 9.555687@3] systemd[1]: Mounting Temporary Directory...
  885. [ 9.558042@3] systemd[1]: Started Debug Shell.
  886. [ 9.558270@3] systemd[1]: Mounted Huge Pages File System.
  887. [ 9.558460@3] systemd[1]: Mounting POSIX Message Queue File System...
  888. [ 9.566333@2] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  889. [ 9.568253@2] systemd[1]: Starting Setup machine-id...
  890. [ 9.570601@2] systemd[1]: Mounting Debug File System...
  891. [ 9.572621@2] systemd[1]: Starting Set ondemand threshold...
  892. [ 9.575112@2] systemd[1]: Starting Show Version...
  893. [ 9.634420@3] systemd[1]: Starting Load Kernel Modules...
  894. [ 9.637832@3] systemd[1]: Starting udev Coldplug all Devices...
  895. [ 9.646170@3] systemd[1]: Starting Slices.
  896. [ 9.646517@3] systemd[1]: Reached target Slices.
  897. [ 9.647033@3] systemd[1]: Mounting Variable Directory...
  898. [ 9.651301@3] systemd[1]: Starting Kodi config dir rebrand...
  899. [ 9.671977@3] systemd[1]: Started Remount Root and Kernel File Systems.
  900. [ 9.684276@3] systemd[1]: Started Create list of required static device nodes for the current kernel.
  901. [ 9.714618@1] systemd[1]: Mounted POSIX Message Queue File System.
  902. [ 9.715381@1] systemd[1]: Mounted Variable Directory.
  903. [ 9.716094@1] systemd[1]: Mounted Temporary Directory.
  904. [ 9.748857@2] systemd[1]: Mounted Debug File System.
  905. [ 9.754177@0] systemd[1]: Started Set ondemand threshold.
  906. [ 9.755066@0] systemd[1]: Started Show Version.
  907. [ 9.756254@0] systemd[1]: Started Kodi config dir rebrand.
  908. [ 9.774919@0] systemd[1]: Started Setup machine-id.
  909. [ 9.790791@2] gpu cooling register okay with err=0
  910. [ 9.790936@2] Mali: Mali device driver loaded
  911. [ 9.798705@2] Triggered SDIO WiFi power on and bus rescan.
  912. [ 9.798715@2] wifi_setup_dt
  913. [ 9.798721@2] wifi_request_32k_clk : ON-->ON for sdio_wifi
  914. [ 9.798727@2] interrupt_pin(118) : (null)
  915. [ 9.798749@2] reg:2620,clearmask=100010,setmask=0
  916. [ 9.798755@2] reg:2622,clearmask=ff,set pin=118
  917. [ 9.798760@2] reg:2623,clearmask=70000,setmask=4
  918. [ 9.798764@2] interrupt_pin(118) : sdio_wifi
  919. [ 9.798769@2] power_on_pin(6) : (null)
  920. [ 9.798778@2] power_on_pin(6) : sdio_wifi
  921. [ 9.798783@2] power_on_pin2(108) : (null)
  922. [ 9.798792@2] power_on_pin2(108) : sdio_wifi
  923. [ 9.798946@3] Disconnect cb-Host
  924. [ 9.871841@0] systemd[1]: Started udev Coldplug all Devices.
  925. [ 9.876932@0] systemd[1]: Starting Journal Service...
  926. [ 9.878146@0] systemd[1]: Starting Setup Timezone data...
  927. [ 9.880639@0] systemd[1]: Started Debug /var/log relink.
  928. [ 9.881094@0] systemd[1]: Starting Create Static Device Nodes in /dev...
  929. [ 9.883284@2] usb 2-1: USB disconnect, device number 2
  930. [ 9.907115@1] systemd[1]: Started Create Static Device Nodes in /dev.
  931. [ 9.908062@1] systemd[1]: Started Setup Timezone data.
  932. [ 9.944624@1] systemd[1]: Starting Local File Systems (Pre).
  933. [ 9.944712@1] systemd[1]: Reached target Local File Systems (Pre).
  934. [ 9.944790@1] systemd[1]: Starting Local File Systems.
  935. [ 9.944840@1] systemd[1]: Reached target Local File Systems.
  936. [ 9.944926@1] systemd[1]: Started Rebuild Journal Catalog.
  937. [ 10.047436@1] systemd[1]: Started Journal Service.
  938. [ 10.072531@1] systemd-journald[1763]: Received request to flush runtime journal from PID 1
  939. [ 10.101834@2] WIFI Disable! 6
  940. [ 10.411830@2] WIFI Enable! 6
  941. [ 10.792059@1] Indeed it is in host mode hprt0 = 00041901
  942. [ 10.863471@3] cfg80211: Calling CRDA to update world regulatory domain
  943. [ 10.863637@3] cfg80211: World regulatory domain updated:
  944. [ 10.863646@3] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  945. [ 10.863653@3] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (2000 mBi, 0 mBm)
  946. [ 10.863659@3] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (2000 mBi, 0 mBm)
  947. [ 10.863665@3] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (2000 mBi, 0 mBm)
  948. [ 10.863671@3] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
  949. [ 10.863677@3] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
  950. [ 10.863687@3] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (2000 mBi, 0 mBm)
  951. [ 10.863694@3] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
  952. [ 10.863700@3] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  953. [ 10.894016@1] rtc clock error
  954. [ 10.937309@3] aml_nftl_open ok!
  955. [ 10.938205@3] blktrans_ioctl -cmd: 5331,801c0204,64
  956. [ 10.938718@2] aml_nftl_open ok!
  957. [ 10.938933@3] aml_nftl_open ok!
  958. [ 10.939744@2] blktrans_ioctl -cmd: 5331,801c0204,64
  959. [ 10.939749@3] blktrans_ioctl -cmd: 5331,801c0204,64
  960. [ 10.944667@1] blktrans_ioctl -cmd: 5331,801c0204,64
  961. [ 10.950395@0] aml_nftl_open ok!
  962. [ 10.950847@0] blktrans_ioctl -cmd: 5331,801c0204,64
  963. [ 10.951287@1] aml_nftl_open ok!
  964. [ 10.952510@1] blktrans_ioctl -cmd: 5331,801c0204,64
  965. [ 10.971853@1] usb 2-1: new low-speed USB device number 3 using dwc_otg
  966. [ 10.973666@3] Indeed it is in host mode hprt0 = 00041901
  967. [ 11.003819@0] blktrans_ioctl -cmd: 5331,801c0204,64
  968. [ 11.173901@0] Indeed it is in host mode hprt0 = 00001101
  969. [ 11.185162@3] usb 2-1: New USB device found, idVendor=04d9, idProduct=a01c
  970. [ 11.185176@3] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  971. [ 11.185182@3] usb 2-1: Product: Wireless USB Device
  972. [ 11.185189@3] usb 2-1: Manufacturer: HOLTEK
  973. [ 11.193601@2] input: HOLTEK Wireless USB Device as /devices/lm0/usb2/2-1/2-1:1.0/input/input5
  974. [ 11.194409@2] hid-generic 0003:04D9:A01C.0003: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-lm0-1/input0
  975. [ 11.209052@3] input: HOLTEK Wireless USB Device as /devices/lm0/usb2/2-1/2-1:1.1/input/input6
  976. [ 11.209685@3] hid-generic 0003:04D9:A01C.0004: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-lm0-1/input1
  977. [ 11.351839@0] usb 1-1: reset high-speed USB device number 2 using dwc_otg
  978. [ 11.353837@0] Indeed it is in host mode hprt0 = 00001101
  979. [ 11.562481@3] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
  980. [ 11.570365@3] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
  981. [ 11.571298@3] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  982. [ 11.577416@1] usbcore: registered new interface driver rt2800usb
  983. [ 11.411816@0] [aml_sdio_timeout] time_start_cnt:999
  984. [ 11.411816@0] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x113, virqc=0x3f003f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
  985. [ 11.411816@0] [aml_sdio_timeout] time_start_cnt:1000
  986. [ 11.411816@0] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f001f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
  987. [ 11.411816@0] 
  988. [ 13.412086@0] [aml_sdio_timeout] time_start_cnt:995
  989. [ 13.412086@0] <6>[ 13.446241@0] sdio: new high speed SDIO card at address 0001, clock 39843750, 4-bit-bus-width
  990. [ 13.455029@2] [sdio_reinit] finish
  991. [ 13.412352@3] [aml_sdio_print_err] sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f001f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
  992. [ 13.412352@3] 
  993. [ 13.562467@3] Console: switching to colour dummy device 80x30
  994. [ 13.667272@3] RTL871X: module init start
  995. [ 13.667290@3] RTL871X: rtl8723bs v4.3.5_11545.20140603_BTCOEX20140507-4E40
  996. [ 13.667296@3] RTL871X: build time: Jun 23 2015 00:22:22
  997. [ 13.667300@3] RTL871X: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
  998. [ 13.667304@3] wifi_setup_dt
  999. [ 13.667310@3] wifi_request_32k_clk : ON-->ON for sdio_wifi
  1000. [ 13.667315@3] interrupt_pin(118) : sdio_wifi
  1001. [ 13.667322@3] sdio_wifi is using the pin GPIOX_21
  1002. [ 13.667331@3] wifi_dt : gpio op failed(-16) at line 210
  1003. [ 13.667342@3] reg:2620,clearmask=100010,setmask=0
  1004. [ 13.667351@3] reg:2622,clearmask=ff,set pin=118
  1005. [ 13.667357@3] reg:2623,clearmask=70000,setmask=4
  1006. [ 13.667363@3] interrupt_pin(118) : sdio_wifi
  1007. [ 13.667367@3] power_on_pin(6) : sdio_wifi
  1008. [ 13.667372@3] sdio_wifi is using the pin GPIOAO_6
  1009. [ 13.667376@3] wifi_dt : gpio op failed(-16) at line 232
  1010. [ 13.667383@3] power_on_pin(6) : sdio_wifi
  1011. [ 13.667388@3] power_on_pin2(108) : sdio_wifi
  1012. [ 13.667392@3] sdio_wifi is using the pin GPIOX_11
  1013. [ 13.667397@3] wifi_dt : gpio op failed(-16) at line 244
  1014. [ 13.667402@3] power_on_pin2(108) : sdio_wifi
  1015. [ 13.667407@3] ######platform_wifi_power_on:
  1016. [ 13.667414@3] WIFI Disable! 6
  1017. [ 13.667620@3] Disconnect cb-Host
  1018. [ 13.765388@0] cur_mode = 0
  1019. [ 13.765407@0] [0x0] = 0x1dd0190
  1020. [ 13.765411@0] [0x4] = 0xf800ca
  1021. [ 13.765416@0] [0x8] = 0x82006e
  1022. [ 13.765420@0] [0xc] = 0x3c0030
  1023. [ 13.765425@0] [0x10] = 0x30fa0013
  1024. [ 13.765437@0] [0x18] = 0x6f19000
  1025. [ 13.765446@0] [0x1c] = 0x9f40
  1026. [ 13.765455@0] [0x20] = 0x0
  1027. [ 13.765465@0] [0x24] = 0x0
  1028. [ 13.765477@0] [0x28] = 0x0
  1029. [ 13.765488@0] set_remote_mode[69]
  1030. [ 13.881884@2] usb 2-1: USB disconnect, device number 3
  1031. [ 13.971823@3] WIFI Enable! 6
  1032. [ 14.271634@3] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
  1033. [ 14.281822@3] sdio_reset_comm():
  1034. [ 14.288551@3] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
  1035. [ 14.441836@1] Indeed it is in host mode hprt0 = 00041901
  1036. [ 14.537436@3] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1037. [ 14.621876@2] usb 2-1: new low-speed USB device number 4 using dwc_otg
  1038. [ 14.623711@3] Indeed it is in host mode hprt0 = 00041901
  1039. [ 14.834400@2] usb 2-1: New USB device found, idVendor=04d9, idProduct=a01c
  1040. [ 14.834421@2] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1041. [ 14.834432@2] usb 2-1: Product: Wireless USB Device
  1042. [ 14.834438@2] usb 2-1: Manufacturer: HOLTEK
  1043. [ 14.841307@2] input: HOLTEK Wireless USB Device as /devices/lm0/usb2/2-1/2-1:1.0/input/input7
  1044. [ 14.844291@2] hid-generic 0003:04D9:A01C.0005: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-lm0-1/input0
  1045. [ 14.857842@2] input: HOLTEK Wireless USB Device as /devices/lm0/usb2/2-1/2-1:1.1/input/input8
  1046. [ 14.858516@2] hid-generic 0003:04D9:A01C.0006: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-lm0-1/input1
  1047. [ 15.244595@3] wlan0: authenticate with 58:98:35:bc:bb:1e
  1048. [ 15.266697@3] wlan0: send auth to 58:98:35:bc:bb:1e (try 1/3)
  1049. [ 15.268408@3] wlan0: authenticated
  1050. [ 15.271852@0] wlan0: associate with 58:98:35:bc:bb:1e (try 1/3)
  1051. [ 15.276874@3] wlan0: RX AssocResp from 58:98:35:bc:bb:1e (capab=0x411 status=0 aid=6)
  1052. [ 15.281306@3] wlan0: associated
  1053. [ 15.281369@3] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1054. [ 15.609734@2] Digital output mode: 0 - PCM
  1055. [ 15.690840@0] aml_i2s_close device type 8
  1056. [ 15.715451@0] IEC958 16bit
  1057. [ 15.715468@0] hdmitx: audio: aout notify rate 48000
  1058. [ 15.715474@0] hdmitx: audio: aout notify size 16
  1059. [ 15.715481@0] hdmitx: audio: audio channel num is 1
  1060. [ 15.715489@0] hdmitx: audio: SPDIF
  1061. [ 15.715511@0] hdmitx: audio: current VIC: 4
  1062. [ 15.715516@0] hdmitx: audio: audio sample rate: 3
  1063. [ 15.715520@0] hdmitx: audio: reset audio N para
  1064. [ 15.715531@0] hdmitx: audio: PCM out to HDMI
  1065. [ 15.715536@0] hdmitx: audio: i2s_to_spdif_flag:1
  1066. [ 15.715539@0] hdmitx: audio: Enable audio spdif to HDMI
  1067. [ 15.715546@0] hdmitx: audio: Audio Type: PCM
  1068. [ 15.715589@0] hdmitx: audio: set audio param
  1069. [ 15.715596@0] aml_i2s_close device type 2
  1070. [ 15.865083@3] buf=0
  1071. [ 15.865094@3] IEC958_mode_raw=0
  1072. [ 15.865136@3] IEC958_mode_codec= 0,IEC958 type 2 CH PCM
  1073. [ 15.865142@3] last mode 0,now 0
  1074. [ 15.871588@3] ----aml_hw_iec958_init,runtime->rate=44100--
  1075. [ 15.871601@3] [aml-spdif-dai]enterd aml_hw_iec958_init,set_clock:4,sample_rate=5
  1076. [ 15.871606@3] audio_set_958_clk, freq=5,
  1077. [ 15.871612@3] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
  1078. [ 15.871617@3] iec958 mode PCM16
  1079. [ 15.871624@3] IEC958 16bit
  1080. [ 15.871631@3] hdmitx: audio: aout notify rate 44100
  1081. [ 15.871636@3] hdmitx: audio: aout notify size 16
  1082. [ 15.871644@3] hdmitx: audio: audio channel num is 1
  1083. [ 15.871651@3] hdmitx: audio: SPDIF
  1084. [ 15.871663@3] hdmitx: audio: current VIC: 4
  1085. [ 15.871667@3] hdmitx: audio: audio sample rate: 2
  1086. [ 15.871671@3] hdmitx: audio: reset audio N para
  1087. [ 15.871682@3] hdmitx: audio: PCM out to HDMI
  1088. [ 15.871687@3] hdmitx: audio: i2s_to_spdif_flag:1
  1089. [ 15.871690@3] hdmitx: audio: Enable audio spdif to HDMI
  1090. [ 15.871697@3] hdmitx: audio: Audio Type: PCM
  1091. [ 15.871740@3] hdmitx: audio: set audio param
  1092. [ 15.871746@3] [aml-spdif-dai]spdif dma f0969000,phy addr 2d800000
  1093. [ 15.871849@3] enter aml_set_bias_level level: 1
  1094. [ 15.871857@3] enter aml_set_bias_level level: 2
  1095. [ 15.872115@3] ----aml_hw_iec958_init,runtime->rate=44100--
  1096. [ 15.872124@3] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
  1097. [ 15.872131@3] iec958 mode PCM16
  1098. [ 15.872137@3] IEC958 16bit
  1099. [ 15.872143@3] hdmitx: audio: aout notify rate 44100
  1100. [ 15.872147@3] hdmitx: audio: aout notify size 16
  1101. [ 15.872153@3] hdmitx: audio: audio channel num is 1
  1102. [ 15.872161@3] hdmitx: audio: SPDIF
  1103. [ 15.872172@3] hdmitx: audio: current VIC: 4
  1104. [ 15.872176@3] hdmitx: audio: audio sample rate: 2
  1105. [ 15.872180@3] hdmitx: audio: reset audio N para
  1106. [ 15.872190@3] hdmitx: audio: PCM out to HDMI
  1107. [ 15.872195@3] hdmitx: audio: i2s_to_spdif_flag:1
  1108. [ 15.872199@3] hdmitx: audio: Enable audio spdif to HDMI
  1109. [ 15.872205@3] hdmitx: audio: Audio Type: PCM
  1110. [ 15.872246@3] hdmitx: audio: set audio param
  1111. [ 15.872252@3] [aml-spdif-dai]spdif dma f0969000,phy addr 2d800000
  1112. [ 15.872292@3] enter aml_set_bias_level level: 1
  1113. [ 15.872298@3] enter aml_set_bias_level level: 2
  1114. [ 15.877410@3] [aml-spdif-dai]aiu 958 playback enable
  1115. [ 16.297252@0] [sdio_reinit] finish
  1116. [ 16.353165@0] RTL871X: rtw_ndev_init(wlan1)
  1117. [ 16.358070@0] RTL871X: rtw_ndev_init(wlan2)
  1118. [ 16.363848@2] RTL871X: module init ret=0
  1119. [ 16.440536@3] hdmitx: edid: not find mapped display mode
  1120. [ 16.443097@3] tvmode set to 1080p
  1121. [ 16.443124@3] mode is 15,sync_duration_den=1,sync_duration_num=60
  1122. [ 16.443137@3] request vpu clk holdings: vencp 159375000Hz
  1123. [ 16.443148@3] TV mode 1080p selected.
  1124. [ 16.443161@3] tvoutc_setmode[489]
  1125. [ 16.443166@3] new mode 1080p set ok
  1126. [ 16.443176@3] hdmitx: video: get current mode: 1080p
  1127. [ 16.443185@3] is_similar_hdmi_vic[325] vic_old=4,mode_new=15
  1128. [ 16.443197@3] hdmitx: video: get current mode: 1080p
  1129. [ 16.443209@3] is_similar_hdmi_vic[325] vic_old=4,mode_new=15
  1130. [ 16.443218@3] hdmitx: system: gate/pwr cmd: 7
  1131. [ 16.443265@3] hdmitx: system: already init VIC = 0 Now VIC = 16
  1132. [ 16.443277@3] hdmitx: system: 16 (cd0,cs0,pm1,vd0,1)
  1133. [ 16.443284@3] hdmitx: system: gate/pwr cmd: 0
  1134. [ 16.443291@3] hdmitx: system: hw reset
  1135. [ 16.444344@3] hdmitx: audio: SPDIF
  1136. [ 16.444412@3] reconfig packet setting done
  1137. [ 16.464423@3] hdmitx: system: set pll
  1138. [ 16.464436@3] hdmitx: system: param->VIC:16
  1139. [ 16.464464@3] mode is: 15
  1140. [ 16.464473@3] VPU_VIU_VENC_MUX_CTRL: 0xa
  1141. [ 16.464477@3] viu chan = 1
  1142. [ 16.464481@3] VPU_VIU_VENC_MUX_CTRL: 0xa
  1143. [ 16.464484@3] config HPLL
  1144. [ 16.464489@3] set_hpll_clk_out[167] clk = 2970
  1145. [ 16.481798@3] config HPLL done
  1146. [ 16.481826@3] enc_vpu_bridge_reset[290]
  1147. [ 16.621816@2] hdmitx: system: phy setting done
  1148. [ 16.621830@2] Sink is HDMI device
  1149. [ 16.621838@2] No sink attached
  1150. [ 16.621884@2] hdmitx: audio: audio channel num is 1
  1151. [ 16.621892@2] hdmitx: audio: SPDIF
  1152. [ 16.621904@2] hdmitx: audio: current VIC: 16
  1153. [ 16.621907@2] hdmitx: audio: audio sample rate: 2
  1154. [ 16.621912@2] hdmitx: audio: reset audio N para
  1155. [ 16.621923@2] hdmitx: audio: PCM out to HDMI
  1156. [ 16.621927@2] hdmitx: audio: i2s_to_spdif_flag:1
  1157. [ 16.621931@2] hdmitx: audio: Enable audio spdif to HDMI
  1158. [ 16.621938@2] hdmitx: audio: Audio Type: PCM
  1159. [ 16.634032@2] set_vout_mode[174]
  1160. [ 17.757299@0] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  1161. [ 17.876929@0] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
  1162. [ 18.687258@0] RTL871X: nolinked power save enter
  1163. [ 20.691934@0] enter aml_set_bias_level level: 1
  1164. [ 20.691947@0] enter aml_set_bias_level level: 2
  1165. [ 21.318205@0] RTL871X: nolinked power save leave
  1166. [ 23.165349@0] RTL871X: nolinked power save enter
  1167. [ 23.551802@2] hdmitx: cec: CEC node init
  1168. [ 23.551821@2] hdmitx: cec: cec_func_config: 0xf; P_AO_DEBUG_REG0:0xf
  1169. [ 23.551829@2] hdmitx: cec: Set PWM_E out put RTC 32K!
  1170. [ 23.551834@2] hdmitx: cec: enable:int mask:0x6
  1171. [ 23.552691@2] hdmitx: cec: CEC: start poll dev
  1172. [ 23.613696@2] hdmitx: cec: hw reset :logical addr:0x14
  1173. [ 23.613709@2] hdmitx: cec: CEC: poll online logic device: 0x4 BOOL: 1
  1174. [ 23.613714@2] hdmitx: cec: player_dev[0]:0x4
  1175. [ 23.613718@2] hdmitx: cec: CEC: start poll dev
  1176. [ 23.814031@2] hdmitx: cec: hw reset :logical addr:0x18
  1177. [ 23.814043@2] hdmitx: cec: CEC: poll online logic device: 0x8 BOOL: 0
  1178. [ 23.814048@2] hdmitx: cec: player_dev[1]:0x8
  1179. [ 23.814052@2] hdmitx: cec: physical address:0x5000
  1180. [ 23.814145@2] hdmitx: cec: Set logical address: 8
  1181. [ 24.543578@0] hdmitx: cec: opcode:0x32, hdmitx_device->cec_func_config:0xf
  1182. [ 24.951826@2] hdmitx: cec: cec node init: cec features ok !
  1183. [ 24.952932@2] hdmitx: cec: cec_set_menu_language:p.o.r
  1184. [ 25.031901@0] hdmitx: cec: opcode:0x0, hdmitx_device->cec_func_config:0xf
  1185. [ 26.300480@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1186. [ 26.300493@0] hdmitx: cec: : Key pressed
  1187. [ 26.300498@0] hdmitx: cec: :operands_irq[0]:0x3
  1188. [ 26.300522@0] hdmitx: cec: :key map:105
  1189. [ 26.655174@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1190. [ 27.037490@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1191. [ 27.037503@0] hdmitx: cec: : Key pressed
  1192. [ 27.037508@0] hdmitx: cec: :operands_irq[0]:0x3
  1193. [ 27.037540@0] hdmitx: cec: :key map:105
  1194. [ 27.265777@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1195. [ 27.448877@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1196. [ 27.448880@0] hdmitx: cec: : Key pressed
  1197. [ 27.448883@0] hdmitx: cec: :operands_irq[0]:0x4
  1198. [ 27.448901@0] hdmitx: cec: :key map:106
  1199. [ 27.714718@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1200. [ 27.806259@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1201. [ 27.806262@0] hdmitx: cec: : Key pressed
  1202. [ 27.806264@0] hdmitx: cec: :operands_irq[0]:0x4
  1203. [ 27.806285@0] hdmitx: cec: :key map:106
  1204. [ 27.939073@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1205. [ 28.030785@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1206. [ 28.030790@0] hdmitx: cec: : Key pressed
  1207. [ 28.030793@0] hdmitx: cec: :operands_irq[0]:0x4
  1208. [ 28.030856@0] hdmitx: cec: :key map:106
  1209. [ 28.174168@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1210. [ 28.265738@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1211. [ 28.265741@0] hdmitx: cec: : Key pressed
  1212. [ 28.265743@0] hdmitx: cec: :operands_irq[0]:0x4
  1213. [ 28.265757@0] hdmitx: cec: :key map:106
  1214. [ 28.544814@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1215. [ 28.737582@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1216. [ 28.737594@0] hdmitx: cec: : Key pressed
  1217. [ 28.737599@0] hdmitx: cec: :operands_irq[0]:0x4
  1218. [ 28.737619@0] hdmitx: cec: :key map:106
  1219. [ 29.088705@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1220. [ 29.560680@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1221. [ 29.560693@0] hdmitx: cec: : Key pressed
  1222. [ 29.560699@0] hdmitx: cec: :operands_irq[0]:0x2
  1223. [ 29.560725@0] hdmitx: cec: :key map:108
  1224. [ 29.885012@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1225. [ 30.205875@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1226. [ 30.205890@0] hdmitx: cec: : Key pressed
  1227. [ 30.205895@0] hdmitx: cec: :operands_irq[0]:0x4
  1228. [ 30.205930@0] hdmitx: cec: :key map:106
  1229. [ 30.333012@0] RTL871X: nolinked power save leave
  1230. [ 30.545612@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1231. [ 30.637128@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1232. [ 30.637142@0] hdmitx: cec: : Key pressed
  1233. [ 30.637147@0] hdmitx: cec: :operands_irq[0]:0x0
  1234. [ 30.637176@0] hdmitx: cec: :key map:353
  1235. [ 30.945493@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1236. [ 31.550562@0] AO cpu stop ok.
  1237. [ 31.550973@0] AO cpu runs ok.
  1238. [ 31.551205@0] AO cpu stop ok.
  1239. [ 31.551594@0] AO cpu runs ok.
  1240. [ 32.187720@0] RTL871X: nolinked power save enter
  1241. [ 51.269738@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1242. [ 51.269841@0] hdmitx: cec: : Key pressed
  1243. [ 51.269916@0] hdmitx: cec: :operands_irq[0]:0x0
  1244. [ 51.270054@0] hdmitx: cec: :key map:353
  1245. [ 51.645871@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1246. [ 53.258401@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1247. [ 53.258431@0] hdmitx: cec: : Key pressed
  1248. [ 53.258450@0] hdmitx: cec: :operands_irq[0]:0x2
  1249. [ 53.258488@0] hdmitx: cec: :key map:108
  1250. [ 53.595143@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1251. [ 54.159963@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1252. [ 54.159974@0] hdmitx: cec: : Key pressed
  1253. [ 54.159979@0] hdmitx: cec: :operands_irq[0]:0x2
  1254. [ 54.159992@0] hdmitx: cec: :key map:108
  1255. [ 54.496279@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1256. [ 57.423620@0] RTL871X: nolinked power save leave
  1257. [ 59.462083@0] RTL871X: nolinked power save enter
  1258. [ 114.422977@0] [aml-spdif-dai]aiu 958 playback disable
  1259. [ 114.423373@0] ----aml_hw_iec958_init,runtime->rate=44100--
  1260. [ 114.423493@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
  1261. [ 114.423592@0] iec958 mode PCM16
  1262. [ 114.423690@0] IEC958 16bit
  1263. [ 114.423796@0] hdmitx: audio: aout notify rate 44100
  1264. [ 114.423887@0] hdmitx: audio: aout notify size 16
  1265. [ 114.423994@0] hdmitx: audio: audio channel num is 1
  1266. [ 114.424100@0] hdmitx: audio: SPDIF
  1267. [ 114.424225@0] hdmitx: audio: current VIC: 16
  1268. [ 114.424310@0] hdmitx: audio: audio sample rate: 2
  1269. [ 114.424392@0] hdmitx: audio: reset audio N para
  1270. [ 114.424513@0] hdmitx: audio: PCM out to HDMI
  1271. [ 114.424601@0] hdmitx: audio: i2s_to_spdif_flag:1
  1272. [ 114.424680@0] hdmitx: audio: Enable audio spdif to HDMI
  1273. [ 114.424779@0] hdmitx: audio: Audio Type: PCM
  1274. [ 114.425101@0] hdmitx: audio: set audio param
  1275. [ 114.425210@0] [aml-spdif-dai]spdif dma f0969000,phy addr 2d800000
  1276. [ 114.425645@3] enter aml_set_bias_level level: 1
  1277. [ 114.425756@3] enter aml_set_bias_level level: 2
  1278. [ 124.428719@0] [aml-spdif-dai]enterd aml_spdif_play,set_clock:5,sample_rate=4
  1279. [ 124.428857@0] audio_set_958_clk, freq=4,
  1280. [ 124.428997@0] IEC958 16bit
  1281. [ 124.429085@0] hdmitx: audio: aout notify rate 48000
  1282. [ 124.429174@0] hdmitx: audio: aout notify size 16
  1283. [ 124.429281@0] hdmitx: audio: audio channel num is 1
  1284. [ 124.429386@0] hdmitx: audio: SPDIF
  1285. [ 124.429533@0] hdmitx: audio: current VIC: 16
  1286. [ 124.429616@0] hdmitx: audio: audio sample rate: 3
  1287. [ 124.429679@0] hdmitx: audio: reset audio N para
  1288. [ 124.429819@0] hdmitx: audio: PCM out to HDMI
  1289. [ 124.429886@0] hdmitx: audio: i2s_to_spdif_flag:1
  1290. [ 124.429964@0] hdmitx: audio: Enable audio spdif to HDMI
  1291. [ 124.430063@0] hdmitx: audio: Audio Type: PCM
  1292. [ 124.430383@0] hdmitx: audio: set audio param
  1293. [ 124.430495@0] aml_i2s_close device type 2
  1294. [ 129.433738@3] enter aml_set_bias_level level: 1
  1295. [ 129.433750@3] enter aml_set_bias_level level: 2
  1296. [ 138.326183@0] RTL871X: nolinked power save leave
  1297. [ 140.265368@0] RTL871X: nolinked power save enter
  1298. [ 161.733245@1] aml_nftl_open ok!
  1299. [ 161.733438@1] blktrans_ioctl -cmd: 5331,801c0204,64
  1300. [ 161.754508@1] aml_nftl_open ok!
  1301. [ 161.754645@1] blktrans_ioctl -cmd: 5331,801c0204,64
  1302. [ 161.768070@1] aml_nftl_open ok!
  1303. [ 161.768197@1] blktrans_ioctl -cmd: 5331,801c0204,64
  1304. [ 161.781951@1] aml_nftl_open ok!
  1305. [ 161.782082@1] blktrans_ioctl -cmd: 5331,801c0204,64
  1306. [ 161.786662@1] aml_nftl_open ok!
  1307. [ 161.786790@1] blktrans_ioctl -cmd: 5331,801c0204,64
  1308. [ 161.800493@1] blktrans_ioctl -cmd: 5331,801c0204,64
  1309. [ 161.801673@1] blktrans_ioctl -cmd: 5331,801c0204,64
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!