Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- lsusb -v
- Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 9 Hub
- bDeviceSubClass 0
- bDeviceProtocol 1 Single TT
- bMaxPacketSize0 64
- idVendor 0x8087 Intel Corp.
- idProduct 0x0024 Integrated Rate Matching Hub
- bcdDevice 0.00
- iManufacturer 0
- iProduct 0
- iSerial 0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0002 1x 2 bytes
- bInterval 12
- Hub Descriptor:
- bLength 11
- bDescriptorType 41
- nNbrPorts 8
- wHubCharacteristic 0x0009
- Per-port power switching
- Per-port overcurrent protection
- TT think time 8 FS bits
- bPwrOn2PwrGood 50 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x00 0x00
- PortPwrCtrlMask 0xff 0xff
- Hub Port Status:
- Port 1: 0000.0000
- Port 2: 0000.0000
- Port 3: 0000.0000
- Port 4: 0000.0000
- Port 5: 0000.0000
- Port 6: 0000.0000
- Port 7: 0000.0000
- Port 8: 0000.0000
- Device Qualifier (for other device speed):
- bLength 10
- bDescriptorType 6
- bcdUSB 2.00
- bDeviceClass 9 Hub
- bDeviceSubClass 0
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- bNumConfigurations 1
- can't get debug descriptor: Resource temporarily unavailable
- Device Status: 0x0001
- Self Powered
- Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 9 Hub
- bDeviceSubClass 0
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- idVendor 0x1d6b Linux Foundation
- idProduct 0x0002 2.0 root hub
- bcdDevice 4.02
- iManufacturer 3 Linux 4.2.5-gentoo_2015-11-07 ehci_hcd
- iProduct 2 EHCI Host Controller
- iSerial 1 0000:00:1d.0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0004 1x 4 bytes
- bInterval 12
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 2
- wHubCharacteristic 0x000a
- No power switching (usb 1.0)
- Per-port overcurrent protection
- bPwrOn2PwrGood 10 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x00
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0507 highspeed power suspend enable connect
- Port 2: 0000.0100 power
- can't get device qualifier: Resource temporarily unavailable
- can't get debug descriptor: Resource temporarily unavailable
- Device Status: 0x0001
- Self Powered
- Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 9 Hub
- bDeviceSubClass 0
- bDeviceProtocol 1 Single TT
- bMaxPacketSize0 64
- idVendor 0x8087 Intel Corp.
- idProduct 0x0024 Integrated Rate Matching Hub
- bcdDevice 0.00
- iManufacturer 0
- iProduct 0
- iSerial 0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0001 1x 1 bytes
- bInterval 12
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 6
- wHubCharacteristic 0x0009
- Per-port power switching
- Per-port overcurrent protection
- TT think time 8 FS bits
- bPwrOn2PwrGood 50 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x00
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0000
- Port 2: 0000.0000
- Port 3: 0000.0000
- Port 4: 0000.0000
- Port 5: 0000.0000
- Port 6: 0000.0000
- Device Qualifier (for other device speed):
- bLength 10
- bDescriptorType 6
- bcdUSB 2.00
- bDeviceClass 9 Hub
- bDeviceSubClass 0
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- bNumConfigurations 1
- can't get debug descriptor: Resource temporarily unavailable
- Device Status: 0x0001
- Self Powered
- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 9 Hub
- bDeviceSubClass 0
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- idVendor 0x1d6b Linux Foundation
- idProduct 0x0002 2.0 root hub
- bcdDevice 4.02
- iManufacturer 3 Linux 4.2.5-gentoo_2015-11-07 ehci_hcd
- iProduct 2 EHCI Host Controller
- iSerial 1 0000:00:1a.0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0004 1x 4 bytes
- bInterval 12
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 2
- wHubCharacteristic 0x000a
- No power switching (usb 1.0)
- Per-port overcurrent protection
- bPwrOn2PwrGood 10 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x00
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0507 highspeed power suspend enable connect
- Port 2: 0000.0100 power
- can't get device qualifier: Resource temporarily unavailable
- can't get debug descriptor: Resource temporarily unavailable
- Device Status: 0x0001
- Self Powered
- Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 3.00
- bDeviceClass 9 Hub
- bDeviceSubClass 0
- bDeviceProtocol 3
- bMaxPacketSize0 9
- idVendor 0x1d6b Linux Foundation
- idProduct 0x0003 3.0 root hub
- bcdDevice 4.02
- iManufacturer 3 Linux 4.2.5-gentoo_2015-11-07 xhci-hcd
- iProduct 2 xHCI Host Controller
- iSerial 1 0000:00:14.0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 31
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0004 1x 4 bytes
- bInterval 12
- bMaxBurst 0
- Hub Descriptor:
- bLength 12
- bDescriptorType 42
- nNbrPorts 4
- wHubCharacteristic 0x000a
- No power switching (usb 1.0)
- Per-port overcurrent protection
- bPwrOn2PwrGood 10 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- bHubDecLat 0.0 micro seconds
- wHubDelay 0 nano seconds
- DeviceRemovable 0x00
- Hub Port Status:
- Port 1: 0000.02a0 5Gbps power Rx.Detect
- Port 2: 0000.02a0 5Gbps power Rx.Detect
- Port 3: 0000.02a0 5Gbps power Rx.Detect
- Port 4: 0000.02a0 5Gbps power Rx.Detect
- Binary Object Store Descriptor:
- bLength 5
- bDescriptorType 15
- wTotalLength 15
- bNumDeviceCaps 1
- SuperSpeed USB Device Capability:
- bLength 10
- bDescriptorType 16
- bDevCapabilityType 3
- bmAttributes 0x00
- wSpeedsSupported 0x0008
- Device can operate at SuperSpeed (5Gbps)
- bFunctionalitySupport 3
- Lowest fully-functional device speed is SuperSpeed (5Gbps)
- bU1DevExitLat 10 micro seconds
- bU2DevExitLat 512 micro seconds
- can't get debug descriptor: Resource temporarily unavailable
- Device Status: 0x0001
- Self Powered
- Bus 003 Device 005: ID 152d:1567 JMicron Technology Corp. / JMicron USA Technology Corp.
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.10
- bDeviceClass 0
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 64
- idVendor 0x152d JMicron Technology Corp. / JMicron USA Technology Corp.
- idProduct 0x1567
- bcdDevice 2.23
- iManufacturer 1 FinalLap
- iProduct 2 Go To Final Lap
- iSerial 3 DB987654321116A
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 85
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0x80
- (Bus Powered)
- MaxPower 500mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 2
- bInterfaceClass 8 Mass Storage
- bInterfaceSubClass 6 SCSI
- bInterfaceProtocol 80 Bulk-Only
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0200 1x 512 bytes
- bInterval 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x02 EP 2 OUT
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0200 1x 512 bytes
- bInterval 0
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 1
- bNumEndpoints 4
- bInterfaceClass 8 Mass Storage
- bInterfaceSubClass 6 SCSI
- bInterfaceProtocol 98
- iInterface 10 MSC USB Attached SCSI
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x01 EP 1 OUT
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0200 1x 512 bytes
- bInterval 0
- Command pipe (0x01)
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x82 EP 2 IN
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0200 1x 512 bytes
- bInterval 0
- Status pipe (0x02)
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x83 EP 3 IN
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0200 1x 512 bytes
- bInterval 0
- Data-in pipe (0x03)
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x04 EP 4 OUT
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0200 1x 512 bytes
- bInterval 0
- Data-out pipe (0x04)
- Binary Object Store Descriptor:
- bLength 5
- bDescriptorType 15
- wTotalLength 22
- bNumDeviceCaps 2
- USB 2.0 Extension Device Capability:
- bLength 7
- bDescriptorType 16
- bDevCapabilityType 2
- bmAttributes 0x00000f0e
- BESL Link Power Management (LPM) Supported
- BESL value 3840 us
- SuperSpeed USB Device Capability:
- bLength 10
- bDescriptorType 16
- bDevCapabilityType 3
- bmAttributes 0x00
- wSpeedsSupported 0x000e
- Device can operate at Full Speed (12Mbps)
- Device can operate at High Speed (480Mbps)
- Device can operate at SuperSpeed (5Gbps)
- bFunctionalitySupport 1
- Lowest fully-functional device speed is Full Speed (12Mbps)
- bU1DevExitLat 10 micro seconds
- bU2DevExitLat 32 micro seconds
- can't get debug descriptor: Resource temporarily unavailable
- Device Status: 0x0000
- (Bus Powered)
- Bus 003 Device 002: ID 04d9:a070 Holtek Semiconductor, Inc.
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 0
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 8
- idVendor 0x04d9 Holtek Semiconductor, Inc.
- idProduct 0xa070
- bcdDevice 1.10
- iManufacturer 1 G-SPY
- iProduct 2 USB Gaming Mouse
- iSerial 0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 84
- bNumInterfaces 3
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xa0
- (Bus Powered)
- Remote Wakeup
- MaxPower 100mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 3 Human Interface Device
- bInterfaceSubClass 1 Boot Interface Subclass
- bInterfaceProtocol 1 Keyboard
- iInterface 0
- HID Device Descriptor:
- bLength 9
- bDescriptorType 33
- bcdHID 1.10
- bCountryCode 0 Not supported
- bNumDescriptors 1
- bDescriptorType 34 Report
- wDescriptorLength 63
- Report Descriptors:
- ** UNAVAILABLE **
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0008 1x 8 bytes
- bInterval 1
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 1
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 3 Human Interface Device
- bInterfaceSubClass 0
- bInterfaceProtocol 2 Mouse
- iInterface 0
- HID Device Descriptor:
- bLength 9
- bDescriptorType 33
- bcdHID 1.10
- bCountryCode 0 Not supported
- bNumDescriptors 1
- bDescriptorType 34 Report
- wDescriptorLength 166
- Report Descriptors:
- ** UNAVAILABLE **
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x82 EP 2 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0008 1x 8 bytes
- bInterval 1
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 2
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 3 Human Interface Device
- bInterfaceSubClass 0
- bInterfaceProtocol 0
- iInterface 0
- HID Device Descriptor:
- bLength 9
- bDescriptorType 33
- bcdHID 1.10
- bCountryCode 0 Not supported
- bNumDescriptors 1
- bDescriptorType 34 Report
- wDescriptorLength 26
- Report Descriptors:
- ** UNAVAILABLE **
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x83 EP 3 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0008 1x 8 bytes
- bInterval 8
- can't get device qualifier: Resource temporarily unavailable
- can't get debug descriptor: Resource temporarily unavailable
- Device Status: 0x0000
- (Bus Powered)
- Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 9 Hub
- bDeviceSubClass 0
- bDeviceProtocol 1 Single TT
- bMaxPacketSize0 64
- idVendor 0x1d6b Linux Foundation
- idProduct 0x0002 2.0 root hub
- bcdDevice 4.02
- iManufacturer 3 Linux 4.2.5-gentoo_2015-11-07 xhci-hcd
- iProduct 2 xHCI Host Controller
- iSerial 1 0000:00:14.0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0004 1x 4 bytes
- bInterval 12
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 4
- wHubCharacteristic 0x000a
- No power switching (usb 1.0)
- Per-port overcurrent protection
- TT think time 8 FS bits
- bPwrOn2PwrGood 10 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x00
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0100 power
- Port 2: 0000.0100 power
- Port 3: 0000.0103 power enable connect
- Port 4: 0000.0503 highspeed power enable connect
- can't get device qualifier: Resource temporarily unavailable
- can't get debug descriptor: Resource temporarily unavailable
- Device Status: 0x0001
- Self Powered
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement