Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-29-generic-pae] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Fujitsu MHW BH
- Device Model: FUJITSU MHW2160BH
- Serial Number: K11FT7A28RPH
- LU WWN Device Id: 5 00000e 040f45c84
- Firmware Version: 0000001C
- User Capacity: 160,041,885,696 bytes [160 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: ATA-8-ACS revision 3b
- Local Time is: Thu Jan 3 19:59:41 2013 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 649) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 92) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 84257
- 2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 39649280
- 3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 1
- 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 2723
- 5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 61 (1940, 60)
- 7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 2253
- 8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0
- 9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 7190
- 10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2650
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 63
- 193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 57484
- 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 34 (Min/Max 12/54)
- 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 182
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 61 (1, 6688)
- 197 Current_Pending_Sector 0x0012 095 092 000 Old_age Always - 6
- 198 Offline_Uncorrectable 0x0010 091 091 000 Old_age Offline - 19
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x000f 100 092 060 Pre-fail Always - 25857
- 203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 2632696398705
- 240 Head_Flying_Hours 0x003e 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 959 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 959 occurred at disk power-on lifetime: 7190 hours (299 days + 14 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 07 41 0e 00 ec Error: UNC 7 sectors at LBA = 0x0c000e41 = 201330241
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 40 0e 00 ec 00 00:06:25.848 READ DMA
- 27 00 00 00 00 00 e0 00 00:06:25.848 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 00 00:06:25.840 IDENTIFY DEVICE
- ef 03 45 00 00 00 a0 00 00:06:25.832 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 e0 00 00:06:25.832 READ NATIVE MAX ADDRESS EXT
- Error 958 occurred at disk power-on lifetime: 7190 hours (299 days + 14 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 07 41 0e 00 ec Error: UNC 7 sectors at LBA = 0x0c000e41 = 201330241
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 40 0e 00 ec 00 00:06:21.293 READ DMA
- 27 00 00 00 00 00 e0 00 00:06:21.292 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 00 00:06:21.284 IDENTIFY DEVICE
- ef 03 45 00 00 00 a0 00 00:06:21.277 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 e0 00 00:06:21.276 READ NATIVE MAX ADDRESS EXT
- Error 957 occurred at disk power-on lifetime: 7190 hours (299 days + 14 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 07 41 0e 00 ec Error: UNC 7 sectors at LBA = 0x0c000e41 = 201330241
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 40 0e 00 ec 00 00:06:16.737 READ DMA
- 27 00 00 00 00 00 e0 00 00:06:16.737 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 00 00:06:16.729 IDENTIFY DEVICE
- ef 03 45 00 00 00 a0 00 00:06:16.721 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 e0 00 00:06:16.721 READ NATIVE MAX ADDRESS EXT
- Error 956 occurred at disk power-on lifetime: 7190 hours (299 days + 14 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 07 41 0e 00 ec Error: UNC 7 sectors at LBA = 0x0c000e41 = 201330241
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 40 0e 00 ec 00 00:06:12.181 READ DMA
- 27 00 00 00 00 00 e0 00 00:06:12.181 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 00 00:06:12.173 IDENTIFY DEVICE
- ef 03 45 00 00 00 a0 00 00:06:12.165 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 e0 00 00:06:12.165 READ NATIVE MAX ADDRESS EXT
- Error 955 occurred at disk power-on lifetime: 7190 hours (299 days + 14 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 07 41 0e 00 ec Error: UNC 7 sectors at LBA = 0x0c000e41 = 201330241
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 40 0e 00 ec 00 00:06:07.502 READ DMA
- 27 00 00 00 00 00 e0 00 00:06:07.502 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 00 00:06:07.493 IDENTIFY DEVICE
- ef 03 45 00 00 00 a0 00 00:06:07.486 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 e0 00 00:06:07.486 READ NATIVE MAX ADDRESS EXT
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- ubuntu@ubuntu:~$ ^C
- ubuntu@ubuntu:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement