root@vusolose:~# dmesg
ehci-brcm ehci-brcm.2: Broadcom STB EHCI
ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
ehci-brcm ehci-brcm.2: irq 61, io mem 0x10490300
ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-brcm ehci-brcm.3: Broadcom STB EHCI
ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
ehci-brcm ehci-brcm.3: irq 62, io mem 0x10490500
ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ata2: SATA link down (SStatus 0 SControl 300)
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
ohci-brcm ohci-brcm.0: irq 58, io mem 0x10480400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
ohci-brcm ohci-brcm.1: irq 59, io mem 0x10480600
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ohci-brcm ohci-brcm.2: Broadcom STB OHCI
ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
ohci-brcm ohci-brcm.2: irq 63, io mem 0x10490400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
ohci-brcm ohci-brcm.3: Broadcom STB OHCI
ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
ohci-brcm ohci-brcm.3: irq 64, io mem 0x10490600
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
usbcore: registered new interface driver btusb
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
PM: CP0 COUNT/COMPARE frequency does not depend on divisor
EBI CS0: setting up NAND flash (primary)
NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix H27U4G8F2DTR-BC)
NAND device: 512MiB, SLC, page size: 2048, OOB size: 64
NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix H27U4G8F2DTR-BC)
NAND device: 512MiB, SLC, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
nand_read_bbt: bad block at 0x00000ee00000
nand_read_bbt: bad block at 0x0000160a0000
nand_read_bbt: bad block at 0x000016d80000
nand_read_bbt: bad block at 0x000018c20000
nand_read_bbt: bad block at 0x00001e100000
Creating 4 MTD partitions on "brcmnand.0":
0x000001f00000-0x000020000000 : "rootfs"
0x000001f00000-0x000020000000 : "rootfs(redundant)"
0x000000200000-0x000000900000 : "kernel"
0x000000900000-0x000000a00000 : "mac"
UBI: attaching mtd0 to ubi0
usb 6-1: new low-speed USB device number 2 using ohci-brcm
random: nonblocking pool is initialized
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
usb 6-1: new low-speed USB device number 3 using ohci-brcm
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
UBI: scanning is finished
UBI: attached mtd0 (name "rootfs", size 481 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 3839, bad PEBs: 9, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 11/5, WL threshold: 4096, image sequence number: 950220343
UBI: available PEBs: 0, total reserved PEBs: 3839, PEBs reserved for bad PEB handling: 71
UBI: background thread "ubi_bgt0d" started, PID 55
ALSA device list:
  No soundcards found.
UBIFS: parse sync
UBIFS: background thread "ubifs_bgt0_0" started, PID 58
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 476540928 bytes (454 MiB, 3753 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7F7E8DF0-2DE4-4CFB-BB36-8D7DC5BA5F45, small LPT model
usb 6-1: new low-speed USB device number 4 using ohci-brcm
VFS: Mounted root (ubifs filesystem) on device 0:12.
devtmpfs: mounted
Freeing unused kernel memory: 248K (807e2000 - 80820000)
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
usb 6-1: device not accepting address 4, error -62
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
usb 6-1: new low-speed USB device number 5 using ohci-brcm
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
usb 6-1: device not accepting address 5, error -62
hub 6-0:1.0: unable to enumerate USB device on port 1
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
usb 5-1: new low-speed USB device number 2 using ohci-brcm
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
usb 5-1: device descriptor read/64, error -62
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
usb 5-1: device descriptor read/64, error -62
SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled
usb 5-1: new low-speed USB device number 3 using ohci-brcm
usb 5-1: device descriptor read/64, error -62
usb 5-1: device descriptor read/64, error -62
usb 5-1: new low-speed USB device number 4 using ohci-brcm
procmk_init
bcm_event: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
usb 5-1: device not accepting address 4, error -62
usb 5-1: new low-speed USB device number 5 using ohci-brcm
usb 5-1: device not accepting address 5, error -62
hub 5-0:1.0: unable to enumerate USB device on port 1
DVB: registering new adapter (_vuplus_solose_)
bcm7241: hotplug_callback():
Hotplug - status.connected 1:0:0
bcm7241: hotplug_callback():
Hotplug - connecting HDMI to display 0xe
[GPIO]Default
brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
[MPVR]: >> misc_pvr_init
[VID]: 6bcm7335_video_init
[AUD]: 6bcm7335_audio_init
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
bcm7241: bcm7335_frontend_init(): vtuner1 : 3
BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
BKNI_Malloc(linuxkernel) top users:
    blocks,   bytes, filename:line
      1024,  176128, portinginterface/hsm/src/common/bhsm.c:500
       738,  163824, BSEAV/lib/utils/balloc.c:31
       349,   22336, magnum/commonutils/mrc/src/bmrc_monitor.c:666
  KSEG1 : 0x80000000
input: dreambox advanced remote control (native) as /devices/virtual/input/input0
[LCD]: registered
0:0
[CI]: registered ci0
[CI]: CI interface initialised

[DFP]: registered dbox fp
[DFP]: Scart 4710 is found 4

[SC]: registered sci0
system_time_set wakeup mode get
system_time_set wakeup mode get 0xc4
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1  0
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
__clk_enable: network [1]
bcm7429_pm_network_enable 00
__clk_enable: enet [1]
bcm40nm_pm_genet_enable 00
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0  0
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
bcmgenet bcmgenet.0 eth0: link up, 100 Mbps, full duplex
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1  0
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0  0
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
[AUD]: AUDIO_SET_MUTE 0
[AUD]: AUDIO_SET_MIXER -852484624
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
[AUD]: AUDIO_SET_MIXER : next left volume -210, right volume -210
[AUD]: AUDIO_SET_MIXER -852484624
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume -210, right volume -210
[AUD]: AUDIO_SET_MIXER : next left volume -210, right volume -210
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6941488
[AUD]: AUDIO_PLAY 6941488 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720
[VID]: VIDEO_GET_SIZE aspect: 1 3
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 6941488  0
[VID]: VIDEO_PLAY 6941488  5 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6941488  1
[AUD]: AUDIO_CONTINUE 6941488 1 aph=0xcf5a6500
[AUD]: Mute : 0
[AUD]: AUDIO_CHANNEL_SELECT 0
[AUD]: AUDIO_STOP 6941488
[AUD]: AUDIO_CONTINUE 6941488 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 0
[AUD]: AC3 downmix 0  state : 0
[AUD]: AUDIO_PAUSE 6941488
[AUD]: AUDIO_PLAY 6941488 decoder start : 0
[AUD]: AUDIO_CONTINUE 6941488 1 aph=0xcf601700
[AUD]: Mute : 0
root@vusolose:~# dmesg |grep sd
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper