Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ====== VCELL : 373250, SOC : 53, nType : 4 ======
- [Charger] nScaledVCELL : 373250000, nDesriedSOC, : 41, nMaxSOC : 61, nMinSOC : 21
- * FB base addr = 0xbea70000!
- * PANEL_S6E8AA0_ID_READ : 0x12, 0x8e, 0x9d.
- [ omap_power_get_reset_source :47] PRM_RSTST : 0x2
- <hit enter to activate fiq debugger>
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.0.8-g9434ea2-dirty (sage@minimonster) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #75 SMP PREEMPT Fri Apr 27 12:31:30 EEST 2012
- [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387f
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: Tuna
- [ 0.000000] Reserving 33554432 bytes SDRAM for VRAM
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] OMAP4460 ES1.1
- [ 0.000000] SRAM: Mapped pa 0x4030d000 to va 0xfe40d000 size: 0x1000
- [ 0.000000] PERCPU: Embedded 7 pages/cpu @c0f82000 s7040 r8192 d13440 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 176128
- [ 0.000000] Kernel command line: console=ttyFIQ0 console=tty0 root=/dev/ram0 rootwait mem=1G vmalloc=768M omap_wdt.timer_margin=30 no_console_suspend vram=32M ip=192.168.2.15:192.168.2.14:192.168.2.14:255.255.255.0::usb0:on androidbo=
- [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Memory: 512MB 184MB = 696MB total
- [ 0.000000] Memory: 695296k/695296k available, 353280k reserved, 581632K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
- [ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .init : 0xc0008000 - 0xc004a000 ( 264 kB)
- [ 0.000000] .text : 0xc004a000 - 0xc06d3000 (6692 kB)
- [ 0.000000] .data : 0xc06d4000 - 0xc0735a20 ( 391 kB)
- [ 0.000000] .bss : 0xc0735a44 - 0xc077a2b8 ( 275 kB)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:410
- [ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
- [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty0] enabled
- [ 0.000579] Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344)
- [ 0.070434] pid_max: default: 32768 minimum: 301
- [ 0.070434] Mount-cache hash table entries: 512
- [ 0.070434] Initializing cgroup subsys debug
- [ 0.071472] Initializing cgroup subsys cpuacct
- [ 0.071472] Initializing cgroup subsys freezer
- [ 0.071472] CPU: Testing write buffer coherency: ok
- [ 0.071990] L310 cache controller enabled
- [ 0.071990] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache size: 1048576 B
- [ 0.150085] CPU1: Booted secondary processor
- [ 0.181335] Brought up 2 CPUs
- [ 0.181365] SMP: Total of 2 processors activated (2388.48 BogoMIPS).
- [ 0.181640] devtmpfs: initialized
- [ 0.181640] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
- [ 0.181640] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
- [ 0.181640] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
- [ 0.181640] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
- [ 0.185302] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
- [ 0.185302] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
- [ 0.185302] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
- [ 0.185302] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
- [ 0.185394] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
- [ 0.185394] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
- [ 0.185485] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for thermal_sensor
- [ 0.185485] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
- [ 0.185821] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
- [ 0.185821] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
- [ 0.196929] omap_hwmod: dss_rfbi: softreset failed (waited 10000 usec)
- [ 0.207061] omap_hwmod: mcpdm: cannot be enabled (3)
- [ 0.212280] print_constraints: dummy:
- [ 0.212951] NET: Registered protocol family 16
- [ 0.212951] GPMC revision 6.0
- [ 0.214294] EMIF0 is enabled with IRQ142
- [ 0.214294] EMIF1 is enabled with IRQ143
- [ 0.214294] Last reset was warm software reset (PRM_RSTST=0x2)
- [ 0.214447]
- [ 0.214477] HSI: device registered as omap_hwmod: hsi
- [ 0.214813] OMAP GPIO hardware version 0.1
- [ 0.215942] omap_mux_init: Add partition: #1: core, flags: 2
- [ 0.217803] omap_mux_init: Add partition: #2: wkup, flags: 2
- [ 0.218078] Tuna HW revision: 09 (Maguro 8th Sample), cpu OMAP4460 ES1.1
- [ 0.221801] Using tuna_oled_factory_info_6500k
- [ 0.223449] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio102
- [ 0.223449] omap_mux_init_gpio: Could not set gpio102
- [ 0.223907] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio101
- [ 0.223907] omap_mux_init_gpio: Could not set gpio101
- [ 0.423614] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio100
- [ 0.423645] omap_mux_init_gpio: Could not set gpio100
- [ 0.429016] OMAP DMA hardware revision 0.0
- [ 0.429016] omap_rproc_get_pool: carveout memory is unavailable: 0x0, 0x0
- [ 0.437255] bio: create slab <bio-0> at 0
- [ 0.437652] print_constraints: vwl1271: 2000 mV
- [ 0.438812] SCSI subsystem initialized
- [ 0.439697] usbcore: registered new interface driver usbfs
- [ 0.440185] usbcore: registered new interface driver hub
- [ 0.440338] usbcore: registered new device driver usb
- [ 0.440338] i2c-gpio i2c-gpio.5: using pins 98 (SDA) and 99 (SCL)
- [ 0.454742] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
- [ 0.455413] Skipping twl internal clock init and using bootloader value (unknown osc rate)
- [ 0.457702] twl6030: PIH (irq 39) chaining IRQs 368..387
- [ 0.460205] print_constraints: VUSB: 3300 mV normal standby
- [ 0.460784] print_constraints: VMMC: 1800 mV normal standby
- [ 0.461456] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
- [ 0.461914] print_constraints: VUSIM: 2200 mV normal standby
- [ 0.461914] print_constraints: VCXIO: 1800 mV normal standby
- [ 0.462554] print_constraints: VDAC: 1800 mV normal standby
- [ 0.463378] print_constraints: VAUX1_6030: 3000 mV normal standby
- [ 0.464111] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
- [ 0.464599] print_constraints: VAUX3_6030: 3100 mV normal standby
- [ 0.465454] print_constraints: CLK32KG:
- [ 0.466308] print_constraints: CLK32KAUDIO:
- [ 0.467010] print_constraints: VDD3:
- [ 0.467681] print_constraints: VMEM: at 1250 mV
- [ 0.468475] print_constraints: V2V1: 2100 mV normal standby
- [ 0.469268] print_constraints: VANA: 2100 mV normal standby
- [ 0.478179] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
- [ 0.493804] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
- [ 0.509429] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
- [ 0.510345] omap-rproc omap-rproc.0: dsp is available
- [ 0.510772] omap-rproc omap-rproc.1: ipu is available
- [ 0.511047] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 0.511047] Bluetooth: Core ver 2.16
- [ 0.511810] NET: Registered protocol family 31
- [ 0.511840] Bluetooth: HCI device and connection manager initialized
- [ 0.511840] Bluetooth: HCI socket layer initialized
- [ 0.511901] Bluetooth: L2CAP socket layer initialized
- [ 0.511962] Bluetooth: SCO socket layer initialized
- [ 0.512390] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.512542] Switching to clocksource 32k_counter
- [ 0.517242] Switched to NOHz mode on CPU #0
- [ 0.517242] Switched to NOHz mode on CPU #1
- [ 0.522338] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
- [ 0.523101] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
- [ 0.523620] NET: Registered protocol family 2
- [ 0.523986] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.523986] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.523986] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
- [ 0.525848] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.525848] TCP reno registered
- [ 0.525878] UDP hash table entries: 128 (order: 0, 4096 bytes)
- [ 0.525878] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
- [ 0.526428] NET: Registered protocol family 1
- [ 0.526428] Trying to unpack rootfs image as initramfs...
- [ 0.653472] Freeing initrd memory: 1360K
- [ 1.533416] console [ttyFIQ0] enabled
- [ 1.537109] Registered FIQ tty driver c78aaaa0
- [ 1.543518] omap-iommu omap-iommu.0: ducati registered
- [ 1.548828] omap-iommu omap-iommu.1: tesla registered
- [ 1.554595] audit: initializing netlink socket (disabled)
- [ 1.560089] type=2000 audit(1.554:1): initialized
- [ 1.571289] highmem bounce pool size: 64 pages
- [ 1.576049] ashmem: initialized
- [ 1.579986] fuse init (API version 7.16)
- [ 1.584197] msgmni has been set to 224
- [ 1.589477] io scheduler noop registered
- [ 1.593475] io scheduler deadline registered
- [ 1.597839] io scheduler cfq registered (default)
- [ 1.606567] OMAP DSS rev 4.0
- [ 1.621307] omap-rproc omap-rproc.1: powering up ipu
- [ 1.626586] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully
- [ 1.634613] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully
- [ 1.642913] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
- [ 1.664245] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
- [ 1.682434] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
- [ 1.703063] [drm] Initialized drm 1.1.0 20060810
- [ 1.708099] omap_ion_probe: adding heap secure_input of type 2 with ba300000@5a00000
- [ 1.715972] omap_ion_probe: adding heap tiler of type 4 with ae900000@5100000
- [ 1.723175] omap_ion_probe: adding heap nonsecure_tiler of type 4 with ada00000@f00000
- [ 1.731597] brd: module loaded
- [ 1.742279] loop: module loaded
- [ 1.750274] input: barometer as /devices/virtual/input/input0
- [ 1.756500] sec_jack_probe : Registering jack driver
- [ 1.761871] i2c i2c-4: mpu_probe: 0
- [ 1.780364] i2c i2c-4: Installing irq using 205
- [ 1.784942] i2c i2c-4: Module Param interface = mpuirq
- [ 1.790222] i2c-core: driver [mpu3050] using legacy suspend method
- [ 1.796691] i2c-core: driver [mpu3050] using legacy resume method
- [ 1.802886] mpu_init: Probe name mpu3050
- [ 1.807006] i2c i2c-4: bma250_mod_probe: bma250
- [ 1.811614] i2c i2c-4: Installing Accel irq using 282
- [ 1.825927] i2c i2c-4: mpu3050: +bma250
- [ 1.829864] bma250_mod_init: Probe name bma250_mod
- [ 1.829864] i2c i2c-4: yas530_mod_probe: yas530
- [ 1.839355] i2c i2c-4: Installing Compass irq using 336
- [ 1.863647] i2c i2c-4: mpu3050: +yas530
- [ 1.867614] yas530_mod_init: Probe name yas530_mod
- [ 1.875396] omap_temp_sensor omap_temp_sensor.0: omap_temp_sensor probed
- [ 1.882934] colorcontrol_init misc_register(colorcontrol)
- [ 1.882934] customvoltage_initialization misc_register(customvoltage)
- [ 1.895507] soundcontrol_control_init misc_register(soundcontrol)
- [ 1.903900] m25p80 spi3.0: w25q80 (1024 Kbytes)
- [ 1.910430] PPP generic driver version 2.4.2
- [ 1.915557] PPP Deflate Compression module registered
- [ 1.920684] PPP BSD Compression module registered
- [ 1.926177] PPP MPPE Compression module registered
- [ 1.931030] NET: Registered protocol family 24
- [ 1.935516] tun: Universal TUN/TAP device driver, 1.6
- [ 1.942474] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.948822] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.955841] usbcore: registered new interface driver cdc_acm
- [ 1.961578] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 1.969665] Initializing USB Mass Storage driver...
- [ 1.974700] usbcore: registered new interface driver usb-storage
- [ 1.980743] USB Mass Storage support registered.
- [ 1.985473] usbcore: registered new interface driver usbserial
- [ 1.985626] usbserial: USB Serial Driver core
- [ 2.192504] g_ether gadget: using random self ethernet address
- [ 2.195648] g_ether gadget: using random host ethernet address
- [ 2.208160] usb0: MAC 3a:4c:63:8b:c3:ad
- [ 2.212341] usb0: HOST MAC 66:27:fe:63:a3:dd
- [ 2.216674] g_ether gadget: rndis: can't bind, err 0
- [ 2.221710] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
- [ 2.228393] g_ether gadget: g_ether ready
- [ 2.232482] musb-hdrc musb-hdrc: MUSB HDRC host driver
- [ 2.237792] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
- [ 2.245147] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.252075] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.259368] usb usb1: Product: MUSB HDRC host driver
- [ 2.264373] usb usb1: Manufacturer: Linux 3.0.8-g9434ea2-dirty musb-hcd
- [ 2.271057] usb usb1: SerialNumber: musb-hdrc
- [ 2.276153] hub 1-0:1.0: USB hub found
- [ 2.276153] hub 1-0:1.0: 1 port detected
- [ 2.283996] usbcore: registered new interface driver xpad
- [ 2.290313] usbcore: registered new interface driver usb_acecad
- [ 2.290344] acecad: v3.2:USB Acecad Flair tablet driver
- [ 2.301666] usbcore: registered new interface driver aiptek
- [ 2.307312] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
- [ 2.315307] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
- [ 2.322845] usbcore: registered new interface driver gtco
- [ 2.328308] GTCO usb driver version: 2.00.0006
- [ 2.332672] usbcore: registered new interface driver hanwang
- [ 2.338623] usbcore: registered new interface driver kbtab
- [ 2.344177] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
- [ 2.350067] usbcore: registered new interface driver wacom
- [ 2.355590] wacom: v1.52:USB Wacom tablet driver
- [ 2.360351] input: Melfas MMSxxx Touchscreen as /devices/platform/omap/omap_i2c.3/i2c-3/3-0048/input/input1
- [ 2.747558] GPIO Input Driver: Start gpio inputs for tuna-gpio-keypad in interrupt mode
- [ 2.755767] GPIO Input Driver: Start gpio inputs for tuna-gpio-keypad in interrupt mode
- [ 2.764007] input: tuna-gpio-keypad as /devices/virtual/input/input2
- [ 2.771392] input: proximity as /devices/virtual/input/input3
- [ 2.777679] input: lightsensor-level as /devices/virtual/input/input4
- [ 2.787689] using rtc device, twl_rtc, for alarms
- [ 2.792694] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- [ 2.799224] i2c /dev entries driver
- [ 2.803771] dmm: probe base: fd300000, irq 145
- [ 2.811553] max17040 4-0036: MAX17040 Fuel-Gauge Ver 3
- [ 2.819030] OMAP Watchdog Timer Rev 0x01: initial timeout 30 sec
- [ 2.826538] device-mapper: uevent: version 1.0.3
- [ 2.831848] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- [ 2.840484] Bluetooth: HCI UART driver ver 2.2
- [ 2.845184] Bluetooth: HCI H4 protocol initialized
- [ 2.850311] cpuidle: using governor ladder
- [ 2.854492] cpuidle: using governor menu
- [ 2.865692] max17040 4-0036: online = 1 vcell = 3735000 soc = 52 status = 2 health = 1 temp = 300 charger status = 0
- [ 2.877899] usbcore: registered new interface driver usbhid
- [ 2.883636] usbhid: USB HID core driver
- [ 2.888336] OMAP HSI: HSI driver version 0.4.2
- [ 2.893005] omap_hsi omap_hsi.0: Registering IRQ mpu_p1 (99)
- [ 2.899017] omap_hsi omap_hsi.0: HSI port 1 initialized
- [ 2.904296] omap_hsi omap_hsi.0: Registering IRQ mpu_dma (103)
- [ 2.910308] omap_hsi omap_hsi.0: HSI Hardware REVISION 0x50043101
- [ 2.917938] omap_hsi omap_hsi.0: Cannot set HSI FClk to default value: 96000000. Will retry on next open
- [ 2.934082] SDP4430 SoC init
- [ 2.970336] asoc: null-codec-dai <-> MultiMedia1 mapping ok
- [ 2.977264] asoc: null-codec-dai <-> MultiMedia2 mapping ok
- [ 2.984588] asoc: null-codec-dai <-> Voice mapping ok
- [ 2.989898] mmc0: new high speed MMC card at address 0001
- [ 2.997009] asoc: null-codec-dai <-> Tones mapping ok
- [ 3.002197] mmcblk0: mmc0:0001 VYL00M 14.6 GiB
- [ 3.007751] mmcblk0boot0: mmc0:0001 VYL00M partition 1 512 KiB
- [ 3.014343] asoc: null-codec-dai <-> Vibra mapping ok
- [ 3.020294] mmcblk0boot1: mmc0:0001 VYL00M partition 2 512 KiB
- [ 3.026489] asoc: null-codec-dai <-> MODEM mapping ok
- [ 3.033020] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
- [ 3.040954] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
- [ 3.048126] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
- [ 3.054077] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
- [ 3.057952] asoc: dit-hifi <-> omap-mcasp-dai mapping ok
- [ 3.060089] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file
- [ 3.061004] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
- [ 3.061859] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
- [ 3.062713] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
- [ 3.063507] asoc: twl6040-vib <-> mcpdm-vib mapping ok
- [ 3.064392] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
- [ 3.065277] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
- [ 3.066192] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
- [ 3.067047] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
- [ 3.069366] input: Tuna Headset Jack as /devices/platform/soc-audio/sound/card0/input5
- [ 3.072204] ALSA device list:
- [ 3.072204] #0: TI OMAP4 Board
- [ 3.072326] GACT probability NOT on
- [ 3.072326] Mirror/redirect action on
- [ 3.072357] u32 classifier
- [ 3.072357] Actions configured
- [ 3.072387] Netfilter messages via NETLINK v0.30.
- [ 3.072448] nf_conntrack version 0.5.0 (10885 buckets, 43540 max)
- [ 3.073486] ctnetlink v0.93: registering with nfnetlink.
- [ 3.073547] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 3.073547] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 3.073883] xt_time: kernel timezone is -0000
- [ 3.076354] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.076599] arp_tables: (C) 2002 David S. Miller
- [ 3.076690] TCP cubic registered
- [ 3.076843] NET: Registered protocol family 10
- [ 3.083862] Mobile IPv6
- [ 3.083923] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.084350] IPv6 over IPv4 tunneling driver
- [ 3.091003] NET: Registered protocol family 17
- [ 3.091033] NET: Registered protocol family 15
- [ 3.091308] Bridge firewalling registered
- [ 3.220428] Bluetooth: RFCOMM TTY layer initialized
- [ 3.225402] Bluetooth: RFCOMM socket layer initialized
- [ 3.227386] mmcblk0boot1: unknown partition table
- [ 3.235412] Bluetooth: RFCOMM ver 1.11
- [ 3.239227] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 3.240081] mmcblk0boot0: unknown partition table
- [ 3.249420] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 3.255584] NET: Registered protocol family 35
- [ 3.260192] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 3.267974] ThumbEE CPU extension supported.
- [ 3.272308] Registering SWP/SWPB emulation handler
- [ 3.282928] Reprogramming LPDDR2 timings to 400000000 Hz
- [ 3.289123] Power Management for TI OMAP4.
- [ 3.293365] OMAP4 PM: Static dependency added between MPUSS and DUCATI <-> L4_PER/CFG and L3_1.
- [ 3.302886] sr_init: No PMIC hook to init smartreflex
- [ 3.308135] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
- [ 3.316101] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
- [ 3.324066] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
- [ 3.332000] sr_class1p5_driver_init: OMAP4460: add 10mV margin for class 1.5
- [ 3.339294] SmartReflex class 1.5 driver: initialized (86400000ms)
- [ 3.345947] [MODEM_IF] PA EVENT : reset =0, pa=1
- [ 3.350646] [MODEM_IF] PA EVENT : reset =0, pa=0
- [ 3.355682] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:0 (mask:ff)
- [ 3.364898] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1203000 Calib=1000000
- [ 3.374237] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:1 (mask:ff)
- [ 3.383483] sr_class1p5_calib_work: iva: Calibration complete: Voltage Nominal=1140000 Calib=936880
- [ 3.392730] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:2 (mask:ff)
- [ 3.401977] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1127000 Calib=962200
- [ 3.411315] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:3 (mask:ff)
- [ 3.420562] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:4 (mask:ff)
- [ 3.429809] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:5 (mask:ff)
- [ 3.438995] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:6 (mask:ff)
- [ 3.448211] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:7 (mask:ff)
- [ 3.467498] clock: disabling unused clocks to save power
- [ 3.474243] regulator_init_complete: VAUX3_6030: disabling
- [ 3.480773] regulator_init_complete: VDAC: disabling
- [ 3.486450] regulator_init_complete: VCXIO: disabling
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement