asterisk

Content of chan_dahdi.conf:

[trunkgroups]

[channels]
context=from-pstn
signalling=fxs_ks
rxwink=300              ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1

;Uncomment these lines if you have problems with the disconection of your analog lines
;busydetect=yes
;busycount=3


immediate=no

#include dahdi-channels.conf
#include chan_dahdi_additional.conf
=========================================================================================================
Content of dahdi_channels.conf:


; Autogenerated by /usr/sbin/dahdi_genconf on Wed Apr 27 11:32:52 2011
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;

; Span 1: WCFXO/0 "Wildcard X100P Board 1" (MASTER)
;;; line="1 WCFXO/0/0"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 1
callerid=
group=
context=default


; Span 2: WCFXO/1 "Wildcard X100P Board 2"
;;; line="2 WCFXO/1/0"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 2
callerid=
group=
context=default

===================================================================================================
/etc/dahdi/system.conf:

# Autogenerated by /usr/sbin/dahdi_genconf on Wed Apr 27 11:32:52 2011
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCFXO/0 "Wildcard X100P Board 1" (MASTER)
fxsks=1
echocanceller=oslec,1

# Span 2: WCFXO/1 "Wildcard X100P Board 2"
fxsks=2
echocanceller=oslec,2

# Global data

loadzone        = us
defaultzone     = us