API tools faq
paste
Advertisement
tthtlc

kernel panic on the latest linus kernel image -BeagleBoardXM

tthtlc
Dec 18th, 2013
154
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.46 KB | None | 0 0
raw download clone embed print report
  1. Starting kernel ...
  2.  
  3. [ 0.000000] Booting Linux on physical CPU 0x0
  4. [ 0.000000] Linux version 3.13.0-rc4 (tthtlc@papamia) (gcc version 4.8.1 (So3
  5. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
  6. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie
  7. [ 0.000000] Machine: OMAP3 Beagle Board
  8. [ 0.000000] cma: CMA: reserved 16 MiB at 9e800000
  9. [ 0.000000] Memory policy: Data cache writeback
  10. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  11. [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
  12. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c11f2000 s13952 r8192 d14720 u36864
  13. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2
  14. [ 0.000000] Kernel command line: console=ttyO2,115200n8 console=tty0 vram=12e
  15. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  16. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  17. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  18. [ 0.000000] Memory: 484876K/523264K available (5503K kernel code, 660K rwdat)
  19. [ 0.000000] Virtual kernel memory layout:
  20. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  21. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  22. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  23. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  24. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  25. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  26. [ 0.000000] .text : 0xc0008000 - 0xc077c060 (7633 kB)
  27. [ 0.000000] .init : 0xc077d000 - 0xc07dd680 ( 386 kB)
  28. [ 0.000000] .data : 0xc07de000 - 0xc0883180 ( 661 kB)
  29. [ 0.000000] .bss : 0xc0883180 - 0xc0de90a0 (5528 kB)
  30. [ 0.000000] Hierarchical RCU implementation.
  31. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
  32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  33. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrups
  34. [ 0.000000] Total of 96 interrupts on 1 active controller
  35. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
  36. [ 0.000000] OMAP clockevent source: timer12 at 32768 Hz
  37. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 6s
  38. [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
  39. [ 0.000000] Console: colour dummy device 80x30
  40. [ 0.000000] console [tty0] enabled
  41. [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingr
  42. [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  43. [ 0.000000] ... MAX_LOCK_DEPTH: 48
  44. [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  45. [ 0.000000] ... CLASSHASH_SIZE: 4096
  46. [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  47. [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  48. [ 0.000000] ... CHAINHASH_SIZE: 16384
  49. [ 0.000000] memory used by lock dependency info: 3695 kB
  50. [ 0.000000] per task-struct memory footprint: 1152 bytes
  51. [ 0.004364] Calibrating delay loop... 511.18 BogoMIPS (lpj=2555904)
  52. [ 0.085906] pid_max: default: 32768 minimum: 301
  53. [ 0.086425] Security Framework initialized
  54. [ 0.086639] Mount-cache hash table entries: 512
  55. [ 0.090911] CPU: Testing write buffer coherency: ok
  56. [ 0.092529] missing device node for CPU 0
  57. [ 0.092590] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  58. [ 0.092681] Setting up static identity map for 0x80539c98 - 0x80539d08
  59. [ 0.097198] Brought up 1 CPUs
  60. [ 0.097259] SMP: Total of 1 processors activated.
  61. [ 0.097290] CPU: All CPU(s) started in SVC mode.
  62. [ 0.101104] devtmpfs: initialized
  63. [ 0.111175] VFP support v0.3: implementor 41 architecture 3 part 30 variant 3
  64. [ 0.169830] pinctrl core: initialized pinctrl subsystem
  65. [ 0.175292] regulator-dummy: no parameters
  66. [ 0.179290] NET: Registered protocol family 16
  67. [ 0.187652] DMA: preallocated 256 KiB pool for atomic coherent allocations
  68. [ 0.190063] omap-gpmc omap-gpmc: GPMC revision 5.0
  69. [ 0.202911] OMAP GPIO hardware version 2.5
  70. [ 0.224578] omap_mux_init: Add partition: #1: core, flags: 4
  71. [ 0.227569] OMAP3 Beagle Rev: xM C
  72. [ 0.244018] omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx
  73. [ 0.252624] Reprogramming SDRC clock to 400000000 Hz
  74. [ 0.255645] hw-breakpoint: debug architecture 0x4 unsupported.
  75. [ 0.274444] omap-mcbsp.2: alias fck already exists
  76. [ 0.275390] omap-mcbsp.3: alias fck already exists
  77. [ 0.280212] OMAP DMA hardware revision 5.0
  78. [ 0.284515] arm-pmu: alias fck already exists
  79. [ 0.363525] bio: create slab <bio-0> at 0
  80. [ 0.368927] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slt
  81. [ 0.369079] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
  82. [ 0.462493] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
  83. [ 0.472167] SCSI subsystem initialized
  84. [ 0.474914] usbcore: registered new interface driver usbfs
  85. [ 0.475555] usbcore: registered new interface driver hub
  86. [ 0.476318] usbcore: registered new device driver usb
  87. [ 0.484466] omap_i2c omap_i2c.1: bus 1 rev4.4 at 2600 kHz
  88. [ 0.487396] omap_i2c omap_i2c.3: bus 3 rev4.4 at 100 kHz
  89. [ 0.497802] Switched to clocksource 32k_counter
  90. [ 0.702056] NET: Registered protocol family 2
  91. [ 0.704467] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  92. [ 0.704772] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
  93. [ 0.707092] TCP: Hash tables configured (established 4096 bind 4096)
  94. [ 0.707305] TCP: reno registered
  95. [ 0.707366] UDP hash table entries: 256 (order: 2, 20480 bytes)
  96. [ 0.707733] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
  97. [ 0.709716] NET: Registered protocol family 1
  98. [ 0.712066] RPC: Registered named UNIX socket transport module.
  99. [ 0.712127] RPC: Registered udp transport module.
  100. [ 0.712158] RPC: Registered tcp transport module.
  101. [ 0.712188] RPC: Registered tcp NFSv4.1 backchannel transport module.
  102. [ 0.713409] Trying to unpack rootfs image as initramfs...
  103. [ 1.098663] Freeing initrd memory: 3152K (c1600000 - c1914000)
  104. [ 1.099365] CPU PMU: probing PMU on CPU 0
  105. [ 1.099426] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 countee
  106. [ 1.326690] VFS: Disk quotas dquot_6.5.2
  107. [ 1.327056] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  108. [ 1.330505] NFS: Registering the id_resolver key type
  109. [ 1.331085] Key type id_resolver registered
  110. [ 1.331115] Key type id_legacy registered
  111. [ 1.331298] jffs2: version 2.2. (NAND) (SUMMARY) �� 2001-2006 Red Hat, Inc.
  112. [ 1.331939] msgmni has been set to 985
  113. [ 1.336944] io scheduler noop registered
  114. [ 1.337005] io scheduler deadline registered
  115. [ 1.337127] io scheduler cfq registered (default)
  116. [ 1.344268] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  117. [ 1.354980] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000
  118. [ 1.358337] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3001
  119. [ 1.360504] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3002
  120. [ 2.057373] console [ttyO2] enabled
  121. [ 2.063537] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 96, base_baud = 3003
  122. [ 2.114105] brd: module loaded
  123. [ 2.143066] loop: module loaded
  124. [ 2.160034] twl 1-0048: PIH (irq 23) chaining IRQs 338..346
  125. [ 2.166534] twl 1-0048: power (irq 343) chaining IRQs 346..353
  126. [ 2.176208] twl4030_gpio twl4030_gpio: gpio (irq 338) chaining IRQs 354..371
  127. [ 2.191955] platform usb_phy_gen_xceiv.2: Driver usb_phy_gen_xceiv requests l
  128. [ 2.205169] hsusb2_vcc: Failed to request enable GPIO510: -22
  129. [ 2.215087] reg-fixed-voltage reg-fixed-voltage.0.auto: Failed to register r2
  130. [ 2.223968] reg-fixed-voltage: probe of reg-fixed-voltage.0.auto failed with2
  131. [ 2.238281] vdd_mpu_iva: 600 <--> 1450 mV normal
  132. [ 2.245605] vdd_core: 600 <--> 1450 mV normal
  133. [ 2.253417] VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
  134. [ 2.262512] VDAC: 1800 mV normal standby
  135. [ 2.269622] VDVI: 1800 mV normal standby
  136. [ 2.276641] VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
  137. [ 2.293273] mtdoops: mtd device (mtddev=name/number) must be supplied
  138. [ 2.301239] No NAND device found
  139. [ 2.304656] nand device scan failed, may be bus-width mismatch
  140. [ 2.328979] usbcore: registered new interface driver asix
  141. [ 2.335266] usbcore: registered new interface driver ax88179_178a
  142. [ 2.342864] usbcore: registered new interface driver cdc_ether
  143. [ 2.349914] usbcore: registered new interface driver r815x
  144. [ 2.356323] usbcore: registered new interface driver smsc95xx
  145. [ 2.363128] usbcore: registered new interface driver net1080
  146. [ 2.369781] usbcore: registered new interface driver cdc_subset
  147. [ 2.376556] usbcore: registered new interface driver zaurus
  148. [ 2.383392] usbcore: registered new interface driver cdc_ncm
  149. [ 2.392303] usbcore: registered new interface driver cdc_wdm
  150. [ 2.399139] usbcore: registered new interface driver usb-storage
  151. [ 2.406066] usbcore: registered new interface driver usbtest
  152. [ 2.415740] mousedev: PS/2 mouse device common for all mice
  153. [ 2.428985] input: twl4030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/10
  154. [ 2.445098] twl_rtc twl_rtc: Power up reset detected.
  155. [ 2.450897] twl_rtc twl_rtc: Enabling TWL-RTC
  156. [ 2.460571] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  157. [ 2.468902] i2c /dev entries driver
  158. [ 2.476654] Driver for 1-wire Dallas network protocol.
  159. [ 2.488739] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  160. [ 2.502899] omap-dma-engine omap-dma-engine: allocating channel for 62
  161. [ 2.510101] omap-dma-engine omap-dma-engine: allocating channel for 61
  162. [ 2.901184] ledtrig-cpu: registered to indicate activity on CPUs
  163. [ 2.911743] usbcore: registered new interface driver usbhid
  164. [ 2.917755] usbhid: USB HID core driver
  165. [ 2.924804] oprofile: using arm/armv7
  166. [ 2.929962] TCP: cubic registered
  167. [ 2.933471] Initializing XFRM netlink socket
  168. [ 2.938201] NET: Registered protocol family 17
  169. [ 2.942993] NET: Registered protocol family 15
  170. [ 2.948181] Key type dns_resolver registered
  171. [ 2.967254] ThumbEE CPU extension supported.
  172. [ 2.979888] VDVI: incomplete constraints, leaving on
  173. [ 2.985504] VDAC: incomplete constraints, leaving on
  174. [ 2.992523] platform usb_phy_gen_xceiv.2: Driver usb_phy_gen_xceiv requests l
  175. [ 3.008483] input: gpio-keys as /devices/platform/gpio-keys/input/input1
  176. [ 3.015869] mmc0: host does not support reading read-only switch. assuming w.
  177. [ 3.026397] platform usb_phy_gen_xceiv.2: Driver usb_phy_gen_xceiv requests l
  178. [ 3.037994] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC)
  179. [ 3.050140] Freeing unused kernel memory: 384K (c077d000 - c07dd000)
  180. [ 3.057617] mmc0: new high speed SDHC card at address 57aa
  181. [ 3.077362] mmcblk0: mmc0:57aa SD04G 3.69 GiB
  182. [ 3.089782] mmcblk0: p1 p2
  183. [ 3.120574] platform usb_phy_gen_xceiv.2: Driver usb_phy_gen_xceiv requests l
  184. [ 3.380187] udevd[781]: starting version 175
  185. [ 6.011199] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. )
  186. [ 6.994781] random: init urandom read with 93 bits of entropy available
  187. [ 7.288513] init: ureadahead main process (913) terminated with status 5
  188. [ 7.306182] init: plymouth main process (914) killed by ABRT signal
  189. [ 8.143920] random: nonblocking pool is initialized
  190. [ 8.389556] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
  191. [ 12.221008] init: Caught segmentation fault, core dumped
  192. [ 12.256988] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00
  193. [ 12.256988]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!