Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- system 00:07: [io 0x1854-0x1857] has been reserved
- system 00:08: [io 0x0290-0x029f] has been reserved
- system 00:08: [io 0x02a0-0x02af] has been reserved
- system 00:0b: [io 0x04d0-0x04d1] has been reserved
- system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
- system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
- system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
- system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
- system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
- system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
- system 00:0d: [mem 0xfed90000-0xfed93fff] could not be reserved
- system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
- system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
- system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
- system 00:0d: [mem 0xdffdf000-0xdffdffff] has been reserved
- system 00:0d: [mem 0xdffe0000-0xdffeffff] has been reserved
- PCI: max bus depth: 2 pci_try_num: 3
- pci 0000:00:1c.0: PCI bridge to [bus 01-01]
- pci 0000:00:1c.0: PCI bridge to [bus 01-01]
- pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
- pci 0000:00:1c.0: bridge window [mem 0xdc200000-0xdc2fffff]
- pci 0000:00:1c.0: bridge window [mem pref disabled]
- pci 0000:00:1c.1: PCI bridge to [bus 02-02]
- pci 0000:00:1c.1: PCI bridge to [bus 02-02]
- pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
- pci 0000:00:1c.1: bridge window [mem 0xdc100000-0xdc1fffff]
- pci 0000:00:1c.1: bridge window [mem pref disabled]
- pci 0000:03:00.0: PCI bridge to [bus 04-04]
- pci 0000:03:00.0: PCI bridge to [bus 04-04]
- pci 0000:03:00.0: bridge window [io 0xc000-0xcfff]
- pci 0000:03:00.0: bridge window [mem 0xd8000000-0xdc0fffff]
- pci 0000:03:00.0: bridge window [mem pref disabled]
- pci 0000:00:1c.2: PCI bridge to [bus 03-04]
- pci 0000:00:1c.2: PCI bridge to [bus 03-04]
- pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
- pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xdc0fffff]
- pci 0000:00:1c.2: bridge window [mem pref disabled]
- pci 0000:05:00.0: PCI bridge to [bus 06-06]
- pci 0000:05:00.0: PCI bridge to [bus 06-06]
- pci 0000:05:00.0: bridge window [io disabled]
- pci 0000:05:00.0: bridge window [mem disabled]
- pci 0000:05:00.0: bridge window [mem pref disabled]
- pci 0000:00:1c.3: PCI bridge to [bus 05-06]
- pci 0000:00:1c.3: PCI bridge to [bus 05-06]
- pci 0000:00:1c.3: bridge window [io disabled]
- pci 0000:00:1c.3: bridge window [mem disabled]
- pci 0000:00:1c.3: bridge window [mem pref disabled]
- alloc irq_desc for 16 on node -1
- alloc kstat_irqs on node -1
- alloc irq_2_iommu on node -1
- pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:1c.0: setting latency timer to 64
- alloc irq_desc for 17 on node -1
- alloc kstat_irqs on node -1
- alloc irq_2_iommu on node -1
- pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- pci 0000:00:1c.1: setting latency timer to 64
- alloc irq_desc for 18 on node -1
- alloc kstat_irqs on node -1
- alloc irq_2_iommu on node -1
- pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- pci 0000:00:1c.2: setting latency timer to 64
- pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- pci 0000:03:00.0: setting latency timer to 64
- alloc irq_desc for 19 on node -1
- alloc kstat_irqs on node -1
- alloc irq_2_iommu on node -1
- pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
- pci 0000:00:1c.3: setting latency timer to 64
- pci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- pci 0000:05:00.0: setting latency timer to 64
- pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:00: resource 7 [mem 0x000cc000-0x000cffff]
- pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff]
- pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff]
- pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000dbfff]
- pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000dffff]
- pci_bus 0000:00: resource 12 [mem 0x000e0000-0x000e3fff]
- pci_bus 0000:00: resource 13 [mem 0x000e4000-0x000e7fff]
- pci_bus 0000:00: resource 14 [mem 0xd0000000-0xfeafffff]
- pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
- pci_bus 0000:01: resource 1 [mem 0xdc200000-0xdc2fffff]
- pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
- pci_bus 0000:02: resource 1 [mem 0xdc100000-0xdc1fffff]
- pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
- pci_bus 0000:03: resource 1 [mem 0xd8000000-0xdc0fffff]
- pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
- pci_bus 0000:04: resource 1 [mem 0xd8000000-0xdc0fffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
- TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 524288 bind 65536)
- TCP reno registered
- NET: Registered protocol family 1
- pci 0000:00:14.0: power state changed by ACPI to D0
- pci 0000:00:14.0: power state changed by ACPI to D0
- pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:14.0: PCI INT A disabled
- alloc irq_desc for 20 on node -1
- alloc kstat_irqs on node -1
- alloc irq_2_iommu on node -1
- pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- pci 0000:00:1a.0: PCI INT A disabled
- alloc irq_desc for 23 on node -1
- alloc kstat_irqs on node -1
- alloc irq_2_iommu on node -1
- pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- pci 0000:00:1d.0: PCI INT A disabled
- pci 0000:04:00.0: Boot video device
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 16176k freed
- audit: initializing netlink socket (disabled)
- type=2000 audit(1418288075.330:1): initialized
- HugeTLB registered 2 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- msgmni has been set to 31988
- alg: No test for stdrng (krng)
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered (default)
- io scheduler cfq registered
- pcieport 0000:00:1c.0: setting latency timer to 64
- alloc irq_desc for 29 on node -1
- alloc kstat_irqs on node -1
- alloc irq_2_iommu on node -1
- pcieport 0000:00:1c.0: irq 29 for MSI/MSI-X
- pcieport 0000:00:1c.1: setting latency timer to 64
- alloc irq_desc for 30 on node -1
- alloc kstat_irqs on node -1
- alloc irq_2_iommu on node -1
- pcieport 0000:00:1c.1: irq 30 for MSI/MSI-X
- pcieport 0000:00:1c.2: setting latency timer to 64
- alloc irq_desc for 31 on node -1
- alloc kstat_irqs on node -1
- alloc irq_2_iommu on node -1
- pcieport 0000:00:1c.2: irq 31 for MSI/MSI-X
- pcieport 0000:00:1c.3: setting latency timer to 64
- alloc irq_desc for 32 on node -1
- alloc kstat_irqs on node -1
- alloc irq_2_iommu on node -1
- pcieport 0000:00:1c.3: irq 32 for MSI/MSI-X
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- intel_idle: MWAIT substates: 0x42120
- intel_idle: v0.4 model 0x3C
- intel_idle: lapic_timer_reliable_states 0xffffffff
- ipmi message handler version 39.2
- IPMI System Interface driver.
- ipmi_si: probing via SMBIOS
- ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
- ipmi_si: Adding SMBIOS-specified kcs state machine
- ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
- ipmi_si: Interface detection failed
- input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- ACPI: Power Button [PWRB]
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- ACPI: Power Button [PWRF]
- ACPI: Fan [FAN0] (off)
- ACPI: Fan [FAN1] (off)
- ACPI: Fan [FAN2] (off)
- ACPI: Fan [FAN3] (off)
- ACPI: Fan [FAN4] (off)
- ACPI: acpi_idle yielding to intel_idleACPI: SSDT 00000000cdc13c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
- ACPI: SSDT 00000000cdc13618 005AA (v01 PmRef ApIst 00003000 INTL 20120711)
- ACPI: SSDT 00000000cdc12d98 00119 (v01 PmRef ApCst 00003000 INTL 20120711)
- [Firmware Bug]: No valid trip found
- thermal LNXTHERM:01: registered as thermal_zone0
- ACPI: Thermal Zone [TZ00] (28 C)
- thermal LNXTHERM:02: registered as thermal_zone1
- ACPI: Thermal Zone [TZ01] (30 C)
- ERST: Error Record Serialization Table (ERST) support is initialized.
- GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
- Non-volatile memory driver v1.3
- Linux agpgart interface v0.103
- crash memory driver: version 1.1
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- brd: module loaded
- loop: module loaded
- input: Macintosh mouse button emulation as /devices/virtual/input/input2
- Fixed MDIO Bus: probed
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- ehci_hcd 0000:00:1a.0: setting latency timer to 64
- ehci_hcd 0000:00:1a.0: EHCI Host Controller
- ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1a.0: debug port 2
- ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
- ehci_hcd 0000:00:1a.0: irq 20, io mem 0xdc314000
- ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 2.6.32-32-pve ehci_hcd
- usb usb1: SerialNumber: 0000:00:1a.0
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- ehci_hcd 0000:00:1d.0: setting latency timer to 64
- ehci_hcd 0000:00:1d.0: EHCI Host Controller
- ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- ehci_hcd 0000:00:1d.0: debug port 2
- ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
- ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdc313000
- ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: EHCI Host Controller
- usb usb2: Manufacturer: Linux 2.6.32-32-pve ehci_hcd
- usb usb2: SerialNumber: 0000:00:1d.0
- usb usb2: configuration #1 chosen from 1 choice
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- uhci_hcd: USB Universal Host Controller Interface driver
- PNP: No PS/2 controller found. Probing ports directly.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- rtc_cmos 00:06: RTC can wake from S4
- rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- cpuidle: using governor ladder
- cpuidle: using governor menu
- EFI Variables Facility v0.08 2004-May-17
- usbcore: registered new interface driver hiddev
- usbcore: registered new interface driver usbhid
- usbhid: v2.6:USB HID core driver
- GRE over IPv4 demultiplexor driver
- TCP cubic registered
- Initializing XFRM netlink socket
- NET: Registered protocol family 17
- Bridge firewalling registered
- Dcache charge unit 924
- registered taskstats version 1
- rtc_cmos 00:06: setting system clock to 2014-12-11 08:54:36 UTC (1418288076)
- Initalizing network drop monitor service
- Freeing unused kernel memory: 1332k freed
- Write protecting the kernel read-only data: 10240k
- Freeing unused kernel memory: 596k freed
- Freeing unused kernel memory: 1512k freed
- <30>udevd[103]: starting version 175
- dca service started, version 1.12.1
- xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
- xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
- xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- xhci_hcd 0000:00:14.0: setting latency timer to 64
- xhci_hcd 0000:00:14.0: xHCI Host Controller
- xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
- xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
- alloc irq_desc for 33 on node -1
- alloc kstat_irqs on node -1
- alloc irq_2_iommu on node -1
- xhci_hcd 0000:00:14.0: irq 33 for MSI/MSI-X
- usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb3: Product: xHCI Host Controller
- usb usb3: Manufacturer: Linux 2.6.32-32-pve xhci_hcd
- usb usb3: SerialNumber: 0000:00:14.0
- usb usb3: configuration #1 chosen from 1 choice
- xHCI xhci_add_endpoint called for root hub
- xHCI xhci_check_bandwidth called for root hub
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 12 ports detected
- xhci_hcd 0000:00:14.0: xHCI Host Controller
- xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
- usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
- usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
- usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb4: Product: xHCI Host Controller
- usb usb4: Manufacturer: Linux 2.6.32-32-pve xhci_hcd
- usb usb4: SerialNumber: 0000:00:14.0
- usb usb4: configuration #1 chosen from 1 choice
- xHCI xhci_add_endpoint called for root hub
- xHCI xhci_check_bandwidth called for root hub
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 6 ports detected
- Intel(R) Gigabit Ethernet Network Driver - version 5.2.9.4
- Copyright (c) 2007-2014 Intel Corporation.
- igb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- igb 0000:01:00.0: setting latency timer to 64
- alloc irq_desc for 34 on node -1
- alloc kstat_irqs on node -1
- alloc irq_2_iommu on node -1
- igb 0000:01:00.0: irq 34 for MSI/MSI-X
- alloc irq_desc for 35 on node -1
- alloc kstat_irqs on node -1
- alloc irq_2_iommu on node -1
- igb 0000:01:00.0: irq 35 for MSI/MSI-X
- ahci 0000:00:1f.2: version 3.0
- ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- alloc irq_desc for 36 on node -1
- alloc kstat_irqs on node -1
- alloc irq_2_iommu on node -1
- ahci 0000:00:1f.2: irq 36 for MSI/MSI-X
- ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
- ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
- ahci 0000:00:1f.2: setting latency timer to 64
- scsi0 : ahci
- scsi1 : ahci
- scsi2 : ahci
- scsi3 : ahci
- scsi4 : ahci
- scsi5 : ahci
- ata1: SATA max UDMA/133 abar m2048@0xdc312000 port 0xdc312100 irq 36
- ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 36
- ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 36
- ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 36
- ata5: SATA max UDMA/133 abar m2048@0xdc312000 port 0xdc312300 irq 36
- ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 36
- igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
- igb 0000:01:00.0: eth0: (PCIe:2.5GT/s:Width x1)
- igb 0000:01:00.0: eth0: MAC: 40:16:7e:37:21:af
- igb 0000:01:00.0: eth0: PBA No: 001300-000
- igb 0000:01:00.0: LRO is disabled
- igb 0000:01:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
- igb 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- igb 0000:02:00.0: setting latency timer to 64
- alloc irq_desc for 37 on node -1
- alloc kstat_irqs on node -1
- alloc irq_2_iommu on node -1
- igb 0000:02:00.0: irq 37 for MSI/MSI-X
- alloc irq_desc for 38 on node -1
- alloc kstat_irqs on node -1
- alloc irq_2_iommu on node -1
- igb 0000:02:00.0: irq 38 for MSI/MSI-X
- igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
- igb 0000:02:00.0: eth1: (PCIe:2.5GT/s:Width x1)
- igb 0000:02:00.0: eth1: MAC: 40:16:7e:37:21:b0
- igb 0000:02:00.0: eth1: PBA No: 001300-000
- igb 0000:02:00.0: LRO is disabled
- igb 0000:02:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
- usb 1-1: new high speed USB device number 2 using ehci_hcd
- ata5: SATA link down (SStatus 0 SControl 300)
- ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- ata1.00: ATA-9: INTEL SSDSC2BW120A4, DC32, max UDMA/133
- ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- usb 1-1: New USB device found, idVendor=8087, idProduct=8008
- usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- usb 1-1: configuration #1 chosen from 1 choice
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 6 ports detected
- ata1.00: configured for UDMA/133
- scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW12 DC32 PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2 sda3
- sd 0:0:0:0: [sda] Attached SCSI disk
- Refined TSC clocksource calibration: 3092.854 MHz.
- Switching to clocksource tsc
- usb 2-1: new high speed USB device number 2 using ehci_hcd
- usb 2-1: New USB device found, idVendor=8087, idProduct=8000
- usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- usb 2-1: configuration #1 chosen from 1 choice
- hub 2-1:1.0: USB hub found
- hub 2-1:1.0: 6 ports detected
- usb 3-12: new low speed USB device number 2 using xhci_hcd
- ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata6.00: ACPI _SDD failed (AE 0x5)
- usb 3-12: New USB device found, idVendor=04d9, idProduct=1503
- usb 3-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 3-12: Product: USB Keyboard
- usb 3-12: Manufacturer:
- usb 3-12: configuration #1 chosen from 1 choice
- usb 3-12: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
- usb 3-12: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
- input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/input/input3
- generic-usb 0003:04D9:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-12/input0
- input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.1/input/input4
- generic-usb 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-12/input1
- ata3.00: ATA-9: INTEL SSDSC2BW120A4, DC32, max UDMA/133
- ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata2.00: ATA-9: INTEL SSDSC2BW120A4, DC32, max UDMA/133
- ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata4.00: ATA-9: INTEL SSDSC2BW120A4, DC32, max UDMA/133
- ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata2.00: configured for UDMA/133
- scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2BW12 DC32 PQ: 0 ANSI: 5
- ata3.00: configured for UDMA/133
- sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
- sd 1:0:0:0: [sdb] Write Protect is off
- sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- scsi 2:0:0:0: Direct-Access ATA INTEL SSDSC2BW12 DC32 PQ: 0 ANSI: 5
- sdb:
- sd 2:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)
- ata4.00: configured for UDMA/133
- scsi 3:0:0:0: Direct-Access ATA INTEL SSDSC2BW12 DC32 PQ: 0 ANSI: 5
- sd 2:0:0:0: [sdc] Write Protect is off
- sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- unknown partition table
- sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sd 3:0:0:0: [sdd] 234441648 512-byte logical blocks: (120 GB/111 GiB)
- sd 1:0:0:0: [sdb] Attached SCSI disk
- sd 3:0:0:0: [sdd] Write Protect is off
- sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
- sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sdc: unknown partition table
- sdd:
- sd 2:0:0:0: [sdc] Attached SCSI disk
- sdd1 sdd2 < sdd5 >
- sd 3:0:0:0: [sdd] Attached SCSI disk
- ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata6.00: ACPI _SDD failed (AE 0x5)
- ata6.00: ACPI: failed the second time, disabled
- ata6.00: ATA-8: Hitachi HDS721050CLA662, JP2OA50E, max UDMA/133
- ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata6.00: configured for UDMA/133
- scsi 5:0:0:0: Direct-Access ATA Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
- sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- sd 5:0:0:0: [sde] Write Protect is off
- sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
- sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sde: sde1 sde2 < sde5 >
- sd 5:0:0:0: [sde] Attached SCSI disk
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- sd 1:0:0:0: Attached scsi generic sg1 type 0
- sd 2:0:0:0: Attached scsi generic sg2 type 0
- sd 3:0:0:0: Attached scsi generic sg3 type 0
- sd 5:0:0:0: Attached scsi generic sg4 type 0
- EXT3-fs (dm-0): recovery required on readonly filesystem
- EXT3-fs (dm-0): write access will be enabled during recovery
- EXT3-fs: barriers disabled
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (dm-0): recovery complete
- EXT3-fs (dm-0): mounted filesystem with ordered data mode
- <30>udevd[563]: starting version 175
- shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- ACPI: resource (null) [io 0x1828-0x182f] conflicts with ACPI region PMIO [io 0x1800-0x187f]
- ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- ACPI: resource (null) [io 0x1c00-0x1c3f] conflicts with ACPI region GPRL [io 0x1c00-0x1c3f]
- ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- lpc_ich: Resource conflict(s) found affecting gpio_ich
- i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- ACPI: resource 0000:00:1f.3 [io 0xf000-0xf01f] conflicts with ACPI region SMBI [io 0xf000-0xf00f]
- ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- input: PC Speaker as /devices/platform/pcspkr/input/input5
- iTCO_vendor_support: vendor-support=0
- iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
- iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
- iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- EXT3-fs (dm-0): using internal journal
- fuse init (API version 7.13)
- Adding 14548984k swap on /dev/mapper/pve-swap. Priority:-1 extents:1 across:14548984k SSD
- EXT3-fs: barriers disabled
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (dm-2): using internal journal
- EXT3-fs (dm-2): mounted filesystem with ordered data mode
- EXT3-fs: barriers disabled
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (sda2): using internal journal
- EXT3-fs (sda2): mounted filesystem with ordered data mode
- device eth0 entered promiscuous mode
- NET: Registered protocol family 10
- ADDRCONF(NETDEV_UP): eth0: link is not ready
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- Slow work thread pool: Starting up
- Slow work thread pool: Ready
- FS-Cache: Loaded
- NFS: Registering the id_resolver key type
- FS-Cache: Netfs 'nfs' registered for caching
- Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- Loading iSCSI transport class v2.0-870.
- iscsi: registered transport (tcp)
- iscsi: registered transport (iser)
- Netfilter messages via NETLINK v0.30.
- ip_tables: (C) 2000-2006 Netfilter Core Team
- tun: Universal TUN/TAP device driver, 1.6
- tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- ip6_tables: (C) 2000-2006 Netfilter Core Team
- Enabling conntracks and NAT for ve0
- nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- ploop_dev: module loaded
- igb 0000:01:00.0: eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
- vmbr0: port 1(eth0) entering forwarding state
- ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- ip_set: protocol 6
- device tap161i0 entered promiscuous mode
- vmbr0: port 2(tap161i0) entering forwarding state
- device tap163i0 entered promiscuous mode
- vmbr0: port 3(tap163i0) entering forwarding state
- venet0: no IPv6 routers present
- device tap164i0 entered promiscuous mode
- vmbr0: port 4(tap164i0) entering forwarding state
- eth0: no IPv6 routers present
- tap161i0: no IPv6 routers present
- device tap165i0 entered promiscuous mode
- vmbr0: port 5(tap165i0) entering forwarding state
- tap163i0: no IPv6 routers present
- tap164i0: no IPv6 routers present
- tap165i0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement