Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Linux version 2.6.18-238.9.1.el5 ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-50)) #1 SMP Tue Apr 12 18:10:13 EDT 2011
- Command line: ro root=/dev/VolGroup00/LogVol00 ramdisk_size=1048576
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000010000 - 000000000009f800 (usable)
- BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
- BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved)
- BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable)
- BIOS-e820: 00000000bfef0000 - 00000000bfeff000 (ACPI data)
- BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI NVS)
- BIOS-e820: 00000000bff00000 - 00000000c0000000 (usable)
- BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
- BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
- BIOS-e820: 0000000100000000 - 0000000428000000 (usable)
- DMI present.
- ACPI: RSDP (v002 PTLTD ) @ 0x00000000000f6940
- ACPI: XSDT (v001 INTEL 440BX 0x06040000 VMW 0x01324272) @ 0x00000000bfef0649
- ACPI: FADT (v004 INTEL 440BX 0x06040000 PTL 0x000f4240) @ 0x00000000bfefee98
- ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x00000000bfef0847
- ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x00000000bfef07b1
- ACPI: MCFG (v001 PTLTD $PCITBL$ 0x06040000 LTP 0x00000001) @ 0x00000000bfef0775
- ACPI: SRAT (v002 VMWARE MEMPLUG 0x06040000 VMW 0x00000001) @ 0x00000000bfef06cd
- ACPI: DSDT (v001 PTLTD Custom 0x06040000 MSFT 0x03000001) @ 0x0000000000000000
- SRAT: Node 0 PXM 0 0-a0000
- SRAT: Node 0 PXM 0 0-c0000000
- SRAT: Node 0 PXM 0 0-428000000
- No NUMA configuration found
- Faking a node at 0000000000000000-0000000428000000
- Bootmem setup node 0 0000000000000000-0000000428000000
- bootmap start 100000 pages 133
- Memory for crash kernel (0x0 to 0x0) notwithin permissible range
- disabling kdump
- Setting up node 0 0-428000
- On node 0 totalpages: 4034785
- DMA zone: 2425 pages, LIFO batch:0
- DMA32 zone: 768040 pages, LIFO batch:31
- Normal zone: 3264320 pages, LIFO batch:31
- ACPI: PM-Timer IO Port: 0x1008
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- Processor #0 0:8 APIC version 17
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- Processor #1 0:8 APIC version 17
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- Processor #2 0:8 APIC version 17
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
- Processor #3 0:8 APIC version 17
- ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
- Processor #4 0:8 APIC version 17
- ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
- Processor #5 0:8 APIC version 17
- ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
- ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 6, version 17, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Setting APIC routing to flat
- Using ACPI (MADT) for SMP configuration information
- Nosave address range: 000000000009f000 - 00000000000a0000
- Nosave address range: 00000000000a0000 - 00000000000ca000
- Nosave address range: 00000000000ca000 - 00000000000cc000
- Nosave address range: 00000000000cc000 - 00000000000dc000
- Nosave address range: 00000000000dc000 - 00000000000e4000
- Nosave address range: 00000000000e4000 - 00000000000e8000
- Nosave address range: 00000000000e8000 - 0000000000100000
- Nosave address range: 00000000bfef0000 - 00000000bfeff000
- Nosave address range: 00000000bfeff000 - 00000000bff00000
- Nosave address range: 00000000c0000000 - 00000000e0000000
- Nosave address range: 00000000e0000000 - 00000000f0000000
- Nosave address range: 00000000f0000000 - 00000000fec00000
- Nosave address range: 00000000fec00000 - 00000000fec10000
- Nosave address range: 00000000fec10000 - 00000000fee00000
- Nosave address range: 00000000fee00000 - 00000000fee01000
- Nosave address range: 00000000fee01000 - 00000000fffe0000
- Nosave address range: 00000000fffe0000 - 0000000100000000
- Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
- SMP: Allowing 6 CPUs, 0 hotplug CPUs
- Built 1 zonelists. Total pages: 4034785
- Kernel command line: ro root=/dev/VolGroup00/LogVol00 ramdisk_size=1048576
- Initializing CPU#0
- PID hash table entries: 4096 (order: 12, 32768 bytes)
- Using TSC for driving interrupts
- Console: colour VGA+ 80x25
- Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
- Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- Checking aperture...
- ACPI: DMAR not present
- PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- Placing software IO TLB between 0x284d000 - 0x684d000
- Memory: 16044548k/17432576k available (2592k kernel code, 338936k reserved, 1653k data, 224k init)
- Calibrating delay loop (skipped) preset value.. 4800.19 BogoMIPS (lpj=2400096)
- Security Framework v1.0.0 initialized
- SELinux: Initializing.
- SELinux: Starting in permissive mode
- selinux_register_security: Registering secondary module capability
- Capability LSM initialized as secondary
- Mount-cache hash table entries: 256
- CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- CPU: L2 Cache: 512K (64 bytes/line)
- CPU 0/0 -> Node 0
- SMP alternatives: switching to UP code
- ACPI: Core revision 20060707
- Using local APIC timer interrupts.
- Detected 4.124 MHz APIC timer.
- SMP alternatives: switching to SMP code
- Booting processor 1/6 APIC 0x1
- Initializing CPU#1
- Calibrating delay loop (skipped) preset value.. 4800.19 BogoMIPS (lpj=2400096)
- CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- CPU: L2 Cache: 512K (64 bytes/line)
- CPU 1/1 -> Node 0
- Six-Core AMD Opteron(tm) Processor 2431 stepping 00
- SMP alternatives: switching to SMP code
- Booting processor 2/6 APIC 0x2
- Initializing CPU#2
- Calibrating delay loop (skipped) preset value.. 4800.19 BogoMIPS (lpj=2400096)
- CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- CPU: L2 Cache: 512K (64 bytes/line)
- CPU 2/2 -> Node 0
- Six-Core AMD Opteron(tm) Processor 2431 stepping 00
- SMP alternatives: switching to SMP code
- Booting processor 3/6 APIC 0x3
- Initializing CPU#3
- Calibrating delay loop (skipped) preset value.. 4800.19 BogoMIPS (lpj=2400096)
- CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- CPU: L2 Cache: 512K (64 bytes/line)
- CPU 3/3 -> Node 0
- Six-Core AMD Opteron(tm) Processor 2431 stepping 00
- SMP alternatives: switching to SMP code
- Booting processor 4/6 APIC 0x4
- Initializing CPU#4
- Calibrating delay loop (skipped) preset value.. 4800.19 BogoMIPS (lpj=2400096)
- CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- CPU: L2 Cache: 512K (64 bytes/line)
- CPU 4/4 -> Node 0
- Six-Core AMD Opteron(tm) Processor 2431 stepping 00
- SMP alternatives: switching to SMP code
- Booting processor 5/6 APIC 0x5
- Initializing CPU#5
- Calibrating delay loop (skipped) preset value.. 4800.19 BogoMIPS (lpj=2400096)
- CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- CPU: L2 Cache: 512K (64 bytes/line)
- CPU 5/5 -> Node 0
- Six-Core AMD Opteron(tm) Processor 2431 stepping 00
- Brought up 6 CPUs
- CPU#0: NMI watchdog performance counter calibration - 127->147
- CPU#1: NMI watchdog performance counter calibration - 1->21
- CPU#2: NMI watchdog performance counter calibration - 2->22
- CPU#3: NMI watchdog performance counter calibration - 1->21
- CPU#4: NMI watchdog performance counter calibration - 2->22
- CPU#5: NMI watchdog performance counter calibration - 2->22
- NMI watchdog testing PASSED.
- time.c: Using 3.579545 MHz WALL PM GTOD TSC Timekeeping timer.
- time.c: Detected 2400.096 MHz processor.
- sizeof(vma)=176 bytes
- sizeof(page)=56 bytes
- sizeof(inode)=560 bytes
- sizeof(dentry)=216 bytes
- sizeof(ext3inode)=760 bytes
- sizeof(buffer_head)=96 bytes
- sizeof(skbuff)=248 bytes
- migration_cost=55
- checking if image is initramfs... it is
- Freeing initrd memory: 3443k freed
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: Using MMCONFIG at e0000000
- ACPI: Interpreter enabled
- ACPI: Using IOAPIC for interrupt routing
- ACPI: No dock devices found.
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- PCI quirk: region 1000-103f claimed by PIIX4 ACPI
- PCI quirk: region 1040-104f claimed by PIIX4 SMB
- PCI: Transparent bridge - 0000:00:11.0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 14 15)
- Linux Plug and Play Support v0.97 (c) Adam Belay
- pnp: PnP ACPI init
- pnp: PnP ACPI: found 13 devices
- usbcore: registered new driver usbfs
- usbcore: registered new driver hub
- PCI: Using ACPI for IRQ routing
- PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- ACPI: DMAR not present
- PCI-GART: No AMD northbridge found.
- pnp: 00:0c: ioport range 0x1060-0x107f has been reserved
- pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
- pnp: 00:0c: iomem range 0xdbe00000-0xdbffffff has been reserved
- PCI: Bridge: 0000:00:01.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:11.0
- IO window: 2000-3fff
- MEM window: d8900000-d9cfffff
- PREFETCH window 0x00000000dc400000-0x00000000dc9fffff
- PCI: Bridge: 0000:00:15.0
- IO window: 4000-4fff
- MEM window: d9d00000-d9dfffff
- PREFETCH window 0x00000000dca00000-0x00000000dcafffff
- PCI: Bridge: 0000:00:15.1
- IO window: 8000-8fff
- MEM window: da100000-da1fffff
- PREFETCH window 0x00000000dce00000-0x00000000dcefffff
- PCI: Bridge: 0000:00:15.2
- IO window: c000-cfff
- MEM window: da500000-da5fffff
- PREFETCH window 0x00000000dd200000-0x00000000dd2fffff
- PCI: Bridge: 0000:00:15.3
- IO window: disabled.
- MEM window: da900000-da9fffff
- PREFETCH window 0x00000000dd600000-0x00000000dd6fffff
- PCI: Bridge: 0000:00:15.4
- IO window: disabled.
- MEM window: dad00000-dadfffff
- PREFETCH window 0x00000000dda00000-0x00000000ddafffff
- PCI: Bridge: 0000:00:15.5
- IO window: disabled.
- MEM window: db100000-db1fffff
- PREFETCH window 0x00000000dde00000-0x00000000ddefffff
- PCI: Bridge: 0000:00:15.6
- IO window: disabled.
- MEM window: db500000-db5fffff
- PREFETCH window 0x00000000de200000-0x00000000de2fffff
- PCI: Bridge: 0000:00:15.7
- IO window: disabled.
- MEM window: db900000-db9fffff
- PREFETCH window 0x00000000de600000-0x00000000de6fffff
- PCI: Bridge: 0000:00:16.0
- IO window: 5000-5fff
- MEM window: d9e00000-d9efffff
- PREFETCH window 0x00000000dcb00000-0x00000000dcbfffff
- PCI: Bridge: 0000:00:16.1
- IO window: 9000-9fff
- MEM window: da200000-da2fffff
- PREFETCH window 0x00000000dcf00000-0x00000000dcffffff
- PCI: Bridge: 0000:00:16.2
- IO window: d000-dfff
- MEM window: da600000-da6fffff
- PREFETCH window 0x00000000dd300000-0x00000000dd3fffff
- PCI: Bridge: 0000:00:16.3
- IO window: disabled.
- MEM window: daa00000-daafffff
- PREFETCH window 0x00000000dd700000-0x00000000dd7fffff
- PCI: Bridge: 0000:00:16.4
- IO window: disabled.
- MEM window: dae00000-daefffff
- PREFETCH window 0x00000000ddb00000-0x00000000ddbfffff
- PCI: Bridge: 0000:00:16.5
- IO window: disabled.
- MEM window: db200000-db2fffff
- PREFETCH window 0x00000000ddf00000-0x00000000ddffffff
- PCI: Bridge: 0000:00:16.6
- IO window: disabled.
- MEM window: db600000-db6fffff
- PREFETCH window 0x00000000de300000-0x00000000de3fffff
- PCI: Bridge: 0000:00:16.7
- IO window: disabled.
- MEM window: dba00000-dbafffff
- PREFETCH window 0x00000000de700000-0x00000000de7fffff
- PCI: Bridge: 0000:00:17.0
- IO window: 6000-6fff
- MEM window: d9f00000-d9ffffff
- PREFETCH window 0x00000000dcc00000-0x00000000dccfffff
- PCI: Bridge: 0000:00:17.1
- IO window: a000-afff
- MEM window: da300000-da3fffff
- PREFETCH window 0x00000000dd000000-0x00000000dd0fffff
- PCI: Bridge: 0000:00:17.2
- IO window: e000-efff
- MEM window: da700000-da7fffff
- PREFETCH window 0x00000000dd400000-0x00000000dd4fffff
- PCI: Bridge: 0000:00:17.3
- IO window: disabled.
- MEM window: dab00000-dabfffff
- PREFETCH window 0x00000000dd800000-0x00000000dd8fffff
- PCI: Bridge: 0000:00:17.4
- IO window: disabled.
- MEM window: daf00000-daffffff
- PREFETCH window 0x00000000ddc00000-0x00000000ddcfffff
- PCI: Bridge: 0000:00:17.5
- IO window: disabled.
- MEM window: db300000-db3fffff
- PREFETCH window 0x00000000de000000-0x00000000de0fffff
- PCI: Bridge: 0000:00:17.6
- IO window: disabled.
- MEM window: db700000-db7fffff
- PREFETCH window 0x00000000de400000-0x00000000de4fffff
- PCI: Bridge: 0000:00:17.7
- IO window: disabled.
- MEM window: dbb00000-dbbfffff
- PREFETCH window 0x00000000de800000-0x00000000de8fffff
- PCI: Bridge: 0000:00:18.0
- IO window: 7000-7fff
- MEM window: da000000-da0fffff
- PREFETCH window 0x00000000dcd00000-0x00000000dcdfffff
- PCI: Bridge: 0000:00:18.1
- IO window: b000-bfff
- MEM window: da400000-da4fffff
- PREFETCH window 0x00000000dd100000-0x00000000dd1fffff
- PCI: Bridge: 0000:00:18.2
- IO window: f000-ffff
- MEM window: da800000-da8fffff
- PREFETCH window 0x00000000dd500000-0x00000000dd5fffff
- PCI: Bridge: 0000:00:18.3
- IO window: disabled.
- MEM window: dac00000-dacfffff
- PREFETCH window 0x00000000dd900000-0x00000000dd9fffff
- PCI: Bridge: 0000:00:18.4
- IO window: disabled.
- MEM window: db000000-db0fffff
- PREFETCH window 0x00000000ddd00000-0x00000000dddfffff
- PCI: Bridge: 0000:00:18.5
- IO window: disabled.
- MEM window: db400000-db4fffff
- PREFETCH window 0x00000000de100000-0x00000000de1fffff
- PCI: Bridge: 0000:00:18.6
- IO window: disabled.
- MEM window: db800000-db8fffff
- PREFETCH window 0x00000000de500000-0x00000000de5fffff
- PCI: Bridge: 0000:00:18.7
- IO window: disabled.
- MEM window: dbc00000-dbcfffff
- PREFETCH window 0x00000000de900000-0x00000000de9fffff
- PCI: Setting latency timer of device 0000:00:01.0 to 64
- PCI: Setting latency timer of device 0000:00:15.0 to 64
- PCI: Setting latency timer of device 0000:00:15.1 to 64
- PCI: Setting latency timer of device 0000:00:15.2 to 64
- PCI: Setting latency timer of device 0000:00:15.3 to 64
- PCI: Setting latency timer of device 0000:00:15.4 to 64
- PCI: Setting latency timer of device 0000:00:15.5 to 64
- PCI: Setting latency timer of device 0000:00:15.6 to 64
- PCI: Setting latency timer of device 0000:00:15.7 to 64
- PCI: Setting latency timer of device 0000:00:16.0 to 64
- PCI: Setting latency timer of device 0000:00:16.1 to 64
- PCI: Setting latency timer of device 0000:00:16.2 to 64
- PCI: Setting latency timer of device 0000:00:16.3 to 64
- PCI: Setting latency timer of device 0000:00:16.4 to 64
- PCI: Setting latency timer of device 0000:00:16.5 to 64
- PCI: Setting latency timer of device 0000:00:16.6 to 64
- PCI: Setting latency timer of device 0000:00:16.7 to 64
- PCI: Setting latency timer of device 0000:00:17.0 to 64
- PCI: Setting latency timer of device 0000:00:17.1 to 64
- PCI: Setting latency timer of device 0000:00:17.2 to 64
- PCI: Setting latency timer of device 0000:00:17.3 to 64
- PCI: Setting latency timer of device 0000:00:17.4 to 64
- PCI: Setting latency timer of device 0000:00:17.5 to 64
- PCI: Setting latency timer of device 0000:00:17.6 to 64
- PCI: Setting latency timer of device 0000:00:17.7 to 64
- PCI: Setting latency timer of device 0000:00:18.0 to 64
- PCI: Setting latency timer of device 0000:00:18.1 to 64
- PCI: Setting latency timer of device 0000:00:18.2 to 64
- PCI: Setting latency timer of device 0000:00:18.3 to 64
- PCI: Setting latency timer of device 0000:00:18.4 to 64
- PCI: Setting latency timer of device 0000:00:18.5 to 64
- PCI: Setting latency timer of device 0000:00:18.6 to 64
- PCI: Setting latency timer of device 0000:00:18.7 to 64
- NET: Registered protocol family 2
- IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
- TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 262144 bind 65536)
- TCP reno registered
- Simple Boot Flag at 0x36 set to 0x80
- audit: initializing netlink socket (disabled)
- type=2000 audit(1304850768.086:1): initialized
- Total HugeTLB memory allocated, 0
- VFS: Disk quotas dquot_6.5.1
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- SELinux: Registering netfilter hooks
- Initializing Cryptographic API
- alg: No test for crc32c (crc32c-generic)
- ksign: Installing public key data
- Loading keyring
- - Added public key C2DDC58DBBE93568
- - User ID: CentOS (Kernel Module GPG key)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- Limiting direct PCI/PCI transfers.
- Boot video device is 0000:00:0f.0
- PCI: Setting latency timer of device 0000:00:15.0 to 64
- PCI: Setting latency timer of device 0000:00:15.1 to 64
- PCI: Setting latency timer of device 0000:00:15.2 to 64
- PCI: Setting latency timer of device 0000:00:15.3 to 64
- PCI: Setting latency timer of device 0000:00:15.4 to 64
- PCI: Setting latency timer of device 0000:00:15.5 to 64
- PCI: Setting latency timer of device 0000:00:15.6 to 64
- PCI: Setting latency timer of device 0000:00:15.7 to 64
- PCI: Setting latency timer of device 0000:00:16.0 to 64
- PCI: Setting latency timer of device 0000:00:16.1 to 64
- PCI: Setting latency timer of device 0000:00:16.2 to 64
- PCI: Setting latency timer of device 0000:00:16.3 to 64
- PCI: Setting latency timer of device 0000:00:16.4 to 64
- PCI: Setting latency timer of device 0000:00:16.5 to 64
- PCI: Setting latency timer of device 0000:00:16.6 to 64
- PCI: Setting latency timer of device 0000:00:16.7 to 64
- PCI: Setting latency timer of device 0000:00:17.0 to 64
- PCI: Setting latency timer of device 0000:00:17.1 to 64
- PCI: Setting latency timer of device 0000:00:17.2 to 64
- PCI: Setting latency timer of device 0000:00:17.3 to 64
- PCI: Setting latency timer of device 0000:00:17.4 to 64
- PCI: Setting latency timer of device 0000:00:17.5 to 64
- PCI: Setting latency timer of device 0000:00:17.6 to 64
- PCI: Setting latency timer of device 0000:00:17.7 to 64
- PCI: Setting latency timer of device 0000:00:18.0 to 64
- PCI: Setting latency timer of device 0000:00:18.1 to 64
- PCI: Setting latency timer of device 0000:00:18.2 to 64
- PCI: Setting latency timer of device 0000:00:18.3 to 64
- PCI: Setting latency timer of device 0000:00:18.4 to 64
- PCI: Setting latency timer of device 0000:00:18.5 to 64
- PCI: Setting latency timer of device 0000:00:18.6 to 64
- PCI: Setting latency timer of device 0000:00:18.7 to 64
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- ACPI: Processor [CPU0] (supports 8 throttling states)
- ACPI: Processor [CPU5] (supports 8 throttling states)
- ACPI: Processor [CPU4] (supports 8 throttling states)
- ACPI: Processor [CPU3] (supports 8 throttling states)
- ACPI: Processor [CPU2] (supports 8 throttling states)
- ACPI: Processor [CPU1] (supports 8 throttling states)
- Real Time Clock Driver v1.12ac
- Non-volatile memory driver v1.2
- Linux agpgart interface v0.101 (c) Dave Jones
- agpgart: Detected an Intel 440BX Chipset.
- agpgart: AGP aperture is 256M @ 0x0
- Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- brd: module loaded
- Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
- ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
- PIIX4: IDE controller at PCI slot 0000:00:07.1
- PIIX4: chipset revision 1
- PIIX4: not 100% native mode: will probe irqs later
- ide0: BM-DMA at 0x10c0-0x10c7, BIOS settings: hda:pio, hdb:pio
- ide1: BM-DMA at 0x10c8-0x10cf, BIOS settings: hdc:DMA, hdd:pio
- Probing IDE interface ide0...
- Probing IDE interface ide1...
- hdc: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
- ide1 at 0x170-0x177,0x376 on irq 15
- Probing IDE interface ide0...
- ide-floppy driver 0.99.newide
- usbcore: registered new driver hiddev
- usbcore: registered new driver usbhid
- drivers/usb/input/hid-core.c: v2.6:USB HID core driver
- PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
- md: bitmap version 4.39
- TCP bic registered
- Initializing IPsec netlink socket
- NET: Registered protocol family 1
- NET: Registered protocol family 17
- ACPI: (supports S0 S1 S4 S5)
- Initalizing network drop monitor service
- Freeing unused kernel memory: 224k freed
- Write protecting the kernel read-only data: 520k
- input: AT Translated Set 2 keyboard as /class/input/input0
- input: ImPS/2 Generic Wheel Mouse as /class/input/input1
- ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
- USB Universal Host Controller Interface driver v3.0
- SCSI subsystem initialized
- Fusion MPT base driver 3.04.15rh
- Copyright (c) 1999-2008 LSI Corporation
- Fusion MPT SPI Host driver 3.04.15rh
- GSI 16 sharing vector 0x33 and IRQ 16
- ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 51
- mptbase: ioc0: Initiating bringup
- ioc0: LSI53C1030 B0: Capabilities={Initiator}
- scsi0 : ioc0: LSI53C1030 B0, FwRev=01032920h, Ports=1, MaxQ=128, IRQ=51
- Vendor: VMware Model: Virtual disk Rev: 1.0
- Type: Direct-Access ANSI SCSI revision: 02
- target0:0:0: Beginning Domain Validation
- target0:0:0: Domain Validation skipping write tests
- target0:0:0: Ending Domain Validation
- target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127)
- SCSI device sda: 1677721600 512-byte hdwr sectors (858993 MB)
- sda: Write Protect is off
- sda: Mode Sense: 03 00 00 00
- sda: cache data unavailable
- sda: assuming drive cache: write through
- SCSI device sda: 1677721600 512-byte hdwr sectors (858993 MB)
- sda: Write Protect is off
- sda: Mode Sense: 03 00 00 00
- sda: cache data unavailable
- sda: assuming drive cache: write through
- sda: sda1 sda2
- sd 0:0:0:0: Attached scsi disk sda
- libata version 3.00 loaded.
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: [email protected]
- device-mapper: dm-raid45: initialized v0.2594l
- kjournald starting. Commit interval 5 seconds
- EXT3-fs: mounted filesystem with ordered data mode.
- SELinux: Disabled at runtime.
- SELinux: Unregistering netfilter hooks
- type=1404 audit(1304850798.125:2): selinux=0 auid=4294967295 ses=4294967295
- shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- hdc: ATAPI 1X DVD-ROM DVD-R-RAM CD-R/RW drive, 32kB Cache, UDMA(33)
- Uniform CD-ROM driver Revision: 3.20
- input: PC Speaker as /class/input/input2
- Intel(R) PRO/1000 Network Driver - version 7.3.21-k4-3-NAPI
- Copyright (c) 1999-2006 Intel Corporation.
- GSI 17 sharing vector 0x3B and IRQ 17
- ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 59
- PCI: Setting latency timer of device 0000:02:01.0 to 64
- e1000: 0000:02:01.0: e1000_probe: (PCI:66MHz:32-bit) 00:50:56:97:00:0b
- Floppy drive(s): fd0 is 1.44M
- FDC 0 is a post-1991 82077
- parport: PnPBIOS parport detected.
- parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
- e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
- piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
- piix4_smbus 0000:00:07.3: Host SMBus controller not enabled!
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- lp0: using parport0 (interrupt-driven).
- lp0: console ready
- ACPI: AC Adapter [ACAD] (on-line)
- ACPI: Power Button (FF) [PWRF]
- ACPI: Mapper loaded
- dell-wmi: No known WMI GUID found
- md: Autodetecting RAID arrays.
- md: autorun ...
- md: ... autorun DONE.
- device-mapper: multipath: version 1.0.6 loaded
- loop: loaded (max 8 devices)
- EXT3 FS on dm-0, internal journal
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on sda1, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- Adding 18087928k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:18087928k
- acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- acpiphp: Slot [32] registered
- acpiphp: Slot [33] registered
- acpiphp: Slot [34] registered
- acpiphp: Slot [35] registered
- acpiphp: Slot [36] registered
- acpiphp: Slot [37] registered
- acpiphp: Slot [38] registered
- acpiphp: Slot [39] registered
- acpiphp: Slot [40] registered
- acpiphp: Slot [41] registered
- acpiphp: Slot [42] registered
- acpiphp: Slot [43] registered
- acpiphp: Slot [44] registered
- acpiphp: Slot [45] registered
- acpiphp: Slot [46] registered
- acpiphp: Slot [47] registered
- acpiphp: Slot [48] registered
- acpiphp: Slot [49] registered
- acpiphp: Slot [50] registered
- acpiphp: Slot [51] registered
- acpiphp: Slot [52] registered
- acpiphp: Slot [53] registered
- acpiphp: Slot [54] registered
- acpiphp: Slot [55] registered
- acpiphp: Slot [56] registered
- acpiphp: Slot [57] registered
- acpiphp: Slot [58] registered
- acpiphp: Slot [59] registered
- acpiphp: Slot [60] registered
- acpiphp: Slot [61] registered
- acpiphp: Slot [62] registered
- acpiphp: Slot [63] registered
- acpiphp: Slot [160] registered
- acpiphp: Slot [192] registered
- acpiphp: Slot [224] registered
- acpiphp: Slot [256] registered
- acpiphp: Slot [161] registered
- acpiphp: Slot [162] registered
- acpiphp: Slot [163] registered
- acpiphp: Slot [164] registered
- acpiphp: Slot [165] registered
- acpiphp: Slot [166] registered
- acpiphp: Slot [167] registered
- acpiphp: Slot [193] registered
- acpiphp: Slot [194] registered
- acpiphp: Slot [195] registered
- acpiphp: Slot [196] registered
- acpiphp: Slot [197] registered
- acpiphp: Slot [198] registered
- acpiphp: Slot [199] registered
- acpiphp: Slot [225] registered
- acpiphp: Slot [226] registered
- acpiphp: Slot [227] registered
- acpiphp: Slot [228] registered
- acpiphp: Slot [229] registered
- acpiphp: Slot [230] registered
- acpiphp: Slot [231] registered
- acpiphp: Slot [257] registered
- acpiphp: Slot [258] registered
- acpiphp: Slot [259] registered
- acpiphp: Slot [260] registered
- acpiphp: Slot [261] registered
- acpiphp: Slot [262] registered
- acpiphp: Slot [263] registered
- VMware memory control driver initialized
- vmmemctl: started kernel thread pid=3025
- VMCI: Major device number is: 253
- Probing for vmci/PCI.
- GSI 18 sharing vector 0x43 and IRQ 18
- ACPI: PCI Interrupt 0000:00:07.7[A] -> GSI 16 (level, low) -> IRQ 67
- Found vmci/PCI at 0x1080, irq 67.
- VMCIUtil: Host capability check: PASSED
- Registered vmci device.
- Loading iSCSI transport class v2.0-871.
- 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
- All bugs added by David S. Miller <[email protected]>
- cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
- iscsi: registered transport (cxgb3i)
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- IPv6 over IPv4 tunneling driver
- Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010)
- Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.3 (Aug 10, 2010)
- iscsi: registered transport (bnx2i)
- iscsi: registered transport (tcp)
- iscsi: registered transport (iser)
- iscsi: registered transport (be2iscsi)
- e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
- Bluetooth: Core ver 2.10
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: L2CAP ver 2.8
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: HIDP (Human Interface Emulation) ver 1.1
- eth0: no IPv6 routers present
- hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
- hdc: drive_cmd: error=0x04 { AbortedCommand }
- ide: failed opcode was: 0xec
- ip_tables: (C) 2000-2006 Netfilter Core Team
Advertisement
Add Comment
Please, Sign In to add comment