API tools faq
paste
Guest User

PuttyLog

a guest
Apr 23rd, 2013
159
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 45.03 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.04.23 20:26:05 =~=~=~=~=~=~=~=~=~=~=~=
  2. HELLO! BOOT0 is starting!
  3. boot0 version : 1.5.0
  4. dram size =1024
  5. Succeed in opening nand flash.
  6. Succeed in reading Boot1 file head.
  7. The size of Boot1 is 0x00056000.
  8. The file stored in 0X00000000 of block 2 is perfect.
  9. Check is correct.
  10. Ready to disable icache.
  11. Succeed in loading Boot1.
  12. Jump to Boot1.
  13. [ 0.177] boot1 version : 1.5.0
  14. [ 0.177] pmu type = 3
  15. [ 0.178] bat vol = 0
  16. [ 0.210] axi:ahb:apb=3:2:2
  17. [ 0.210] set dcdc2=1400, clock=1008 successed
  18. [ 0.212] key
  19. [ 0.225] no key found
  20. [ 0.225] flash init start
  21. [ 3.225] flash init finish
  22. [ 3.227] fs init ok
  23. [ 3.228] fattype FAT16
  24. [ 3.228] fs mount ok
  25. [ 3.235] script finish
  26. [ 3.236] power finish
  27. [ 3.246] BootMain start
  28.  
  29. [ 3.246] 0
  30.  
  31. [ 3.265] usbdc_vol = 4000, usbdc_cur = 0
  32.  
  33. [ 3.265] usbpc_vol = 4000, usbpc_cur = 0
  34.  
  35. [ 3.268] init to usb pc
  36.  
  37. [ 3.270] set pc
  38.  
  39. [ 3.363] power_start=0x00000102
  40.  
  41. [ 3.363] key value = 0
  42.  
  43. [ 3.363] recovery key high 6, low 4
  44.  
  45. [ 3.367] unable to find fastboot_key key_max value
  46.  
  47. [ 3.375] test for multi os boot with display
  48.  
  49. [ 4.015] show pic finish
  50.  
  51. [ 4.015] load kernel start
  52.  
  53. [ 4.034] load kernel successed
  54.  
  55. [ 4.034] start address = 0x4a000000
  56.  
  57. [ 4.035] power exit detect
  58.  
  59. [ 4.039] usb exit
  60.  
  61.  
  62. U-Boot 2011.09-rc1-00013-g3aa33b0-dirty (Dec 22 2011 - 10:33:19) Allwinner Technology
  63.  
  64. CPU: A10
  65. Board: A10-EVB
  66. DRAM: 512 MiB
  67. WARNING: Caches not enabled
  68. NAND: 3896 MiB
  69. In: serial
  70. Out: serial
  71. Err: serial
  72. --------fastboot partitions--------
  73. -total partitions:9-
  74. -name- -start- -size-
  75. bootloader : 1000000 1000000
  76. env : 2000000 1000000
  77. boot : 3000000 2000000
  78. system : 5000000 20000000
  79. data : 25000000 10000000
  80. misc : 35000000 1000000
  81. recovery : 36000000 2000000
  82. cache : 38000000 8000000
  83. UDISK : 40000000 b3800000
  84. -----------------------------------
  85. Hit any key to stop autoboot: 3  2  1  0
  86.  
  87. NAND read: device 0 offset 0x3000000, size 0x2000000
  88. 33554432 bytes read: OK
  89.  
  90. Starting kernel ...
  91.  
  92. [ 0.000000] Initializing cgroup subsys cpuset
  93. [ 0.000000] Initializing cgroup subsys cpu
  94. [ 0.000000] Linux version 3.0.62+ (rick@rick-VirtualBox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #2 PREEMPT Tue Apr 23 16:52:26 CEST 2013
  95. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
  96. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  97. [ 0.000000] Machine: sun4i
  98. [ 0.000000] Total Detected Memory: 1024MB (via Allwinner's Hack)
  99. [ 0.000000] Memory cut off:
  100. [ 0.000000] MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
  101. [ 0.000000] Memory Reserved:
  102. [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  103. [ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
  104. [ 0.000000] G2D : 0x49000000 - 0x49ffffff ( 16 MB)
  105. [ 0.000000] LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
  106. [ 0.000000] RAMCONSOLE : 0x5be00000 - 0x5bffffff ( 2 MB)
  107. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  108. [ 0.000000] chip-id: A10 (AW1623 revision C)
  109. [ 0.000000] On node 0 totalpages: 245248
  110. [ 0.000000] free_area_init_node: node 0, pgdat c07c6994, node_mem_map c10ef000
  111. [ 0.000000] Normal zone: 1280 pages used for memmap
  112. [ 0.000000] Normal zone: 0 pages reserved
  113. [ 0.000000] Normal zone: 145664 pages, LIFO batch:31
  114. [ 0.000000] HighMem zone: 768 pages used for memmap
  115. [ 0.000000] HighMem zone: 97536 pages, LIFO batch:31
  116. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  117. [ 0.000000] pcpu-alloc: [0] 0
  118. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243200
  119. [ 0.000000] Kernel command line: console=ttyS0,115200 rw init=/init loglevel=5 disp.screen0_output_mode=EDID:1280x1024p60 hdmi.audio=EDID:0
  120. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  121. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  122. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  123. [ 0.000000] Memory: 446MB 512MB = 958MB total
  124. [ 0.000000] Memory: 832660k/832660k available, 150380k reserved, 393216K highmem
  125. [ 0.000000] Virtual kernel memory layout:
  126. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  127. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  128. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  129. [ 0.000000] vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
  130. [ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
  131. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  132. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  133. [ 0.000000] .init : 0xc0008000 - 0xc0031000 ( 164 kB)
  134. [ 0.000000] .text : 0xc0031000 - 0xc0782fb0 (7496 kB)
  135. [ 0.000000] .data : 0xc0784000 - 0xc07cdbe0 ( 295 kB)
  136. [ 0.000000] .bss : 0xc07cdc04 - 0xc0988228 (1770 kB)
  137. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  138. [ 0.000000] NR_IRQS:128
  139. [ 0.000000] timer0: Periodic Mode
  140. [ 0.000000] Console: colour dummy device 80x30
  141. [ 0.000000] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  142. [ 0.040000] pid_max: default: 32768 minimum: 301
  143. [ 0.040000] Mount-cache hash table entries: 512
  144. [ 0.040000] Initializing cgroup subsys cpuacct
  145. [ 0.040000] Initializing cgroup subsys devices
  146. [ 0.040000] Initializing cgroup subsys freezer
  147. [ 0.040000] Initializing cgroup subsys blkio
  148. [ 0.040000] CPU: Testing write buffer coherency: ok
  149. [ 0.040000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  150. [ 0.040000] devtmpfs: initialized
  151. [ 0.040000] print_constraints: dummy:
  152. [ 0.040000] NET: Registered protocol family 16
  153. [ 0.040000] ram_console: got buffer at 5be00000, size 200000
  154. [ 0.040000] ram_console: no valid data in buffer (sig = 0xa50d69a1)
  155. [ 0.040000] console [ram-1] enabled
  156. [ 0.040000] hw-breakpoint: debug architecture 0x4 unsupported.
  157. [ 0.040000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  158. [ 0.040000] Initialize DMAC OK
  159. [ 0.040000] Init eGon pin module V2.0
  160. [ 0.040000] bio: create slab <bio-0> at 0
  161. [ 0.040000] SCSI subsystem initialized
  162. [ 0.040000] libata version 3.00 loaded.
  163. [ 0.040000] usbcore: registered new interface driver usbfs
  164. [ 0.040000] usbcore: registered new interface driver hub
  165. [ 0.040000] usbcore: registered new device driver usb
  166. [ 0.040000] Advanced Linux Sound Architecture Driver Version 1.0.24.
  167. [ 0.040000] cfg80211: Calling CRDA to update world regulatory domain
  168. [ 0.040000] Switching to clocksource aw 64bits couter
  169. [ 0.040000] FS-Cache: Loaded
  170. [ 0.040000] CacheFiles: Loaded
  171. [ 0.050000] Switched to NOHz mode on CPU #0
  172. [ 0.050000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
  173. [ 0.050000] [sw_hcd0]: usb host driver initialize........
  174. [ 0.050000] [sw_udc]: udc_init: version 20080411
  175. [ 0.050000] [sw_udc]: usb_vbase = 0xf1c13000
  176. [ 0.050000] [sw_udc]: sram_vbase = 0xf1c00000
  177. [ 0.050000] [sw_udc]: open_usb_clock
  178. [ 0.060000] udc->driver is null, udc is need not stop
  179. [ 0.060000] NET: Registered protocol family 2
  180. [ 0.060000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  181. [ 0.060000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  182. [ 0.060000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
  183. [ 0.060000] TCP: Hash tables configured (established 131072 bind 65536)
  184. [ 0.060000] TCP reno registered
  185. [ 0.060000] UDP hash table entries: 512 (order: 1, 8192 bytes)
  186. [ 0.060000] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
  187. [ 0.060000] NET: Registered protocol family 1
  188. [ 0.060000] RPC: Registered named UNIX socket transport module.
  189. [ 0.060000] RPC: Registered udp transport module.
  190. [ 0.060000] RPC: Registered tcp transport module.
  191. [ 0.060000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  192. [ 0.060000] Trying to unpack rootfs image as initramfs...
  193. [ 0.130000] Freeing initrd memory: 952K
  194. [ 0.130000] PMU: registered new PMU device of type 0
  195. [ 0.130000] audit: initializing netlink socket (disabled)
  196. [ 0.130000] type=2000 audit(0.129:1): initialized
  197. [ 0.130000] highmem bounce pool size: 64 pages
  198. [ 0.130000] ashmem: initialized
  199. [ 0.140000] VFS: Disk quotas dquot_6.5.2
  200. [ 0.140000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  201. [ 0.140000] NTFS driver 2.1.30 [Flags: R/W].
  202. [ 0.140000] fuse init (API version 7.16)
  203. [ 0.140000] msgmni has been set to 860
  204. [ 0.150000] alg: No test for stdrng (krng)
  205. [ 0.150000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  206. [ 0.150000] io scheduler noop registered
  207. [ 0.150000] io scheduler deadline registered
  208. [ 0.150000] io scheduler cfq registered (default)
  209. [ 0.150000] sunxi disp driver loaded (/dev/disp api 1.0)
  210. [ 0.150000] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  211. [ 0.170000] serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  212. [ 0.790000] console [ttyS0] enabled
  213. [ 0.790000] [uart]: used uart info.: 0x05
  214. [ 0.800000] serial probe 0 irq 1 mapbase 0x01c28000
  215. [ 0.820000] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  216. [ 0.830000] serial probe 2 irq 3 mapbase 0x01c28800
  217. [ 0.860000] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
  218. [ 0.860000] G2D: drv_g2d_init
  219. [ 0.870000] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
  220. [ 0.870000] G2D: head:c9000000,tail:ca000000
  221. [ 0.880000] G2D: Module initialized.major:251
  222. [ 0.880000] brd: module loaded
  223. [ 0.890000] loop: module loaded
  224. [ 0.890000] [NAND]nand driver, init.
  225. [ 0.890000] cmu_clk is 480
  226. [ 0.900000] nand clk init end
  227. [ 0.900000] offset 0xc: 0x6041
  228. [ 0.900000] offset 0x14: 0x8200000b
  229. [ 0.910000] [NAND] nand gpio_request
  230. [ 0.910000] [NAND] nand driver version: 0x2 0x9
  231. [ 0.910000] nand interrupte register ok
  232. [ 0.920000] ret of NFC_ChangMode is 0
  233. [ 0.920000] dma_hdle is 0
  234. [ 0.920000] dma_hdle is 10000008
  235. [ 0.930000] cmu_clk is 480
  236. [ 0.930000] nand clk init end
  237. [ 0.930000] offset 0xc: 0x6041
  238. [ 0.940000] offset 0x14: 0x82000007
  239. [ 0.990000] Dev nand: part 1, start 32768, size 32768
  240. [ 1.000000] Dev nand: part 2, start 65536, size 32768
  241. [ 1.000000] Dev nand: part 3, start 98304, size 65536
  242. [ 1.010000] Dev nand: part 4, start 163840, size 1048576
  243. [ 1.010000] Dev nand: part 5, start 1212416, size 524288
  244. [ 1.020000] Dev nand: part 6, start 1736704, size 32768
  245. [ 1.020000] Dev nand: part 7, start 1769472, size 65536
  246. [ 1.030000] Dev nand: part 8, start 1835008, size 262144
  247. [ 1.030000] Dev nand: part 9, start 2097152, size 5881856
  248. [ 1.040000] nand: nanda nandb nandc nandd nande nandf nandg nandh nandi
  249. [ 1.050000] benn: nand probe enter
  250. [ 1.050000] [NAND]nand driver, ok.
  251. [ 1.050000] hello, sun4i_vibrator init
  252. [ 1.060000] sun4i_vibrator_init motor is not used in config
  253. [ 1.060000] sun4i gpio driver init
  254. [ 1.070000] sun4i_gpio_init script_parser_fetch "gpio_para" "gpio_used" error
  255. [ 1.080000] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  256. [ 1.080000] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  257. [ 1.090000] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  258. [ 1.100000] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  259. [ 1.100000] scsi0 : sw_ahci_platform
  260. [ 1.110000] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 56
  261. [ 1.120000] Fixed MDIO Bus: probed
  262. [ 1.120000] tun: Universal TUN/TAP device driver, 1.6
  263. [ 1.130000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  264. [ 1.130000] wemac Ethernet Driver, V1.01 in file:drivers/net/sun4i/sun4i_wemac.c
  265. [ 1.140000] [EMAC] ahb clk enable
  266. [ 1.140000] [EMAC] ahb gate clk: 0x2026041
  267. [ 1.180000] emac MAC isn't valid!
  268. [ 1.180000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  269. [ 1.190000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  270. [ 1.190000] [sw-ehci1]: open clock
  271. [ 1.220000] [sw-ehci1]: Set USB Power ON
  272. [ 1.220000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  273. [ 1.230000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
  274. [ 1.230000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
  275. [ 1.260000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  276. [ 1.260000] hub 1-0:1.0: USB hub found
  277. [ 1.260000] hub 1-0:1.0: 1 port detected
  278. [ 1.270000] [sw-ohci1]: open clock
  279. [ 1.290000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  280. [ 1.300000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  281. [ 1.310000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
  282. [ 1.370000] hub 2-0:1.0: USB hub found
  283. [ 1.370000] hub 2-0:1.0: 1 port detected
  284. [ 1.380000] [sw-ehci2]: open clock
  285. [ 1.400000] [sw-ehci2]: Set USB Power ON
  286. [ 1.400000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  287. [ 1.410000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
  288. [ 1.420000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
  289. [ 1.440000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  290. [ 1.440000] hub 3-0:1.0: USB hub found
  291. [ 1.440000] hub 3-0:1.0: 1 port detected
  292. [ 1.450000] [sw-ohci2]: open clock
  293. [ 1.460000] ehci_irq: port change detect
  294. [ 1.480000] ata1: SATA link down (SStatus 0 SControl 300)
  295. [ 1.480000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  296. [ 1.490000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
  297. [ 1.500000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
  298. [ 1.560000] hub 4-0:1.0: USB hub found
  299. [ 1.560000] hub 4-0:1.0: 1 port detected
  300. [ 1.570000] Initializing USB Mass Storage driver...
  301. [ 1.570000] usbcore: registered new interface driver usb-storage
  302. [ 1.580000] USB Mass Storage support registered.
  303. [ 1.580000] usbcore: registered new interface driver ums-alauda
  304. [ 1.590000] usbcore: registered new interface driver ums-cypress
  305. [ 1.590000] usbcore: registered new interface driver ums-datafab
  306. [ 1.600000] usbcore: registered new interface driver ums_eneub6250
  307. [ 1.610000] usbcore: registered new interface driver ums-freecom
  308. [ 1.610000] usbcore: registered new interface driver ums-isd200
  309. [ 1.620000] usbcore: registered new interface driver ums-jumpshot
  310. [ 1.630000] usbcore: registered new interface driver ums-karma
  311. [ 1.630000] usbcore: registered new interface driver ums-onetouch
  312. [ 1.640000] usbcore: registered new interface driver ums-realtek
  313. [ 1.640000] usbcore: registered new interface driver ums-sddr09
  314. [ 1.650000] usbcore: registered new interface driver ums-sddr55
  315. [ 1.660000] usbcore: registered new interface driver ums-usbat
  316. [ 1.660000] ------print_msc_config-----
  317. [ 1.670000] vendor_id = 0x18d1
  318. [ 1.670000] mass_storage_id = 0x1
  319. [ 1.670000] adb_id = 0x2
  320. [ 1.680000] usb_manufacturer_name = USB Developer
  321. [ 1.680000] usb_product_name = Android
  322. [ 1.690000] usb_serial_number = 20080411
  323. [ 1.690000] msc_vendor_name = USB 2.0
  324. [ 1.690000] msc_product_name = USB Flash Driver
  325. [ 1.700000] msc_release = 100
  326. [ 1.700000] luns = 3
  327. [ 1.710000] ehci_irq: port change detect
  328. [ 1.710000] ---------------------------
  329. [ 1.710000] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
  330. [ 1.720000] [sw_udc]: alloc request: ep(0xc07b5d18, ep0, 64), req(0xe7bd6d80)
  331. [ 1.730000] [sw_udc]: sw_udc_pullup, is_on = 0
  332. [ 1.730000] [sw_udc]: usbd_stop_work
  333. [ 1.740000] android_usb gadget: Mass Storage Function, version: 2009/09/11
  334. [ 1.740000] android_usb gadget: Number of LUNs=3
  335. [ 1.750000] lun0: LUN: removable file: (no medium)
  336. [ 1.750000] lun1: LUN: removable file: (no medium)
  337. [ 1.760000] lun2: LUN: removable file: (no medium)
  338. [ 1.760000] lun name: lun
  339. [ 1.770000] The port change to OHCI now!
  340. [ 1.770000] lun name: lun1
  341. [ 1.770000] lun name: lun2
  342. [ 1.780000] android_usb gadget: android_usb ready
  343. [ 1.780000] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED
  344. [ 1.790000] [sw_udc]: usbd_start_work
  345. [ 1.790000] mousedev: PS/2 mouse device common for all mice
  346. [ 1.800000] [kpad]: sw keypad init
  347. [ 1.800000] sw keypad fetch keypad uning configuration failed
  348. [ 1.800000] keypad: cannot find using configuration, return without doing anything!
  349. [ 1.810000] input: sun4i-keyboard as /devices/virtual/input/input0
  350. [ 1.820000] ==register_early_suspend =
  351. [ 1.820000] input: sun4i-ir as /devices/virtual/input/input1
  352. [ 1.830000] IR Initial OK
  353. [ 1.830000] ==register_early_suspend =
  354. [ 1.830000] ===========================hv_keypad_init=====================
  355. [ 1.840000] ========HV Inital ===================
  356. [ 1.850000] [sw_udc]: IRQ: suspend
  357. [ 1.850000] [sw_udc]: ERR: usb speed is unkown
  358. [ 1.850000] tkey_fetch_sysconfig_para: tkey_unused.
  359. [ 1.860000] hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0
  360. [ 1.870000] sunxi RTC version 0.1
  361. [ 1.870000] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380248073
  362. [ 1.880000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  363. [ 1.880000] sunxi-rtc sunxi-rtc: read time 2013-4-23 18:23:49
  364. [ 1.890000] using rtc device, rtc, for alarms
  365. [ 1.890000] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  366. [ 1.900000] i2c /dev entries driver
  367. [ 1.900000] !!! base_Addr = 0xe88d4c00
  368. [ 1.910000] config i2c gpio with gpio_config api
  369. [ 1.910000] twi0, apb clock = 24000000
  370. [ 1.920000] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  371. [ 1.920000] i2c i2c-0: Invalid probe address 0x00
  372. [ 1.930000] I2C: i2c-0: AW16XX I2C adapter
  373. [ 1.930000] !!! base_Addr = 0xe88d6000
  374. [ 1.940000] twi1, apb clock = 24000000
  375. [ 1.940000] i2c i2c-1: Invalid probe address 0x00
  376. [ 1.940000] I2C: i2c-1: AW16XX I2C adapter
  377. [ 1.950000] !!! base_Addr = 0xe88d8400
  378. [ 1.950000] [sw_udc]: IRQ: reset
  379. [ 1.950000] [sw_udc]: irq: reset happen, throw away all urb
  380. [ 1.960000] twi2, apb clock = 24000000
  381. [ 1.970000] i2c i2c-2: Invalid probe address 0x00
  382. [ 1.970000] I2C: i2c-2: AW16XX I2C adapter
  383. [ 1.970000] Linux video capture interface: v2.00
  384. [ 1.980000] [cedar dev]: install start!!!
  385. [ 1.980000] [cedar dev]: install end!!!
  386. [ 1.990000] [ace_drv] start!!!
  387. [ 1.990000] [sw_udc]:
  388. [ 1.990000] +++++++++++++++++++++++++++++++++++++
  389. [ 1.990000] [sw_udc]: usb enter high speed.
  390. [ 1.990000] [sw_udc]:
  391. [ 1.990000] +++++++++++++++++++++++++++++++++++++
  392. [ 2.010000] android_work: sent uevent USB_STATE=CONNECTED
  393. [ 2.010000] [sw_udc]: IRQ: reset
  394. [ 2.010000] [sw_udc]: irq: reset happen, throw away all urb
  395. [ 2.020000] [ace_drv] init end!!!
  396. [ 2.030000] [pa_drv] start!!!
  397. [ 2.030000] [pa_drv] init end!!!
  398. [ 2.030000] print_constraints: axp20_ldo1: 1300 mV
  399. [ 2.040000] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  400. [ 2.050000] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  401. [ 2.050000] [sw_udc]: Set address 2
  402. [ 2.060000] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  403. [ 2.060000] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
  404. [ 2.070000] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
  405. [ 2.080000] usb 4-1: new full speed USB device number 2 using sw-ohci
  406. [ 2.090000] WRN:L1055(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: dev->driver->setup failed. (-22)
  407. [ 2.090000] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  408. [ 2.100000] [sw_udc]: IRQ: reset
  409. [ 2.100000] [sw_udc]: irq: reset happen, throw away all urb
  410. [ 2.110000] input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.41/input/input2
  411. [ 2.130000] sunxi_wdt: sunxi WatchDog Timer Driver v1.0
  412. [ 2.140000] [sw_udc]: IRQ: reset
  413. [ 2.140000] [sw_udc]: irq: reset happen, throw away all urb
  414. [ 2.150000] sunxi_wdt: initialized (timeout=23s, nowayout=0)
  415. [ 2.160000] device-mapper: uevent: version 1.0.3
  416. [ 2.160000] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  417. [ 2.170000] cpuidle: using governor ladder
  418. [ 2.170000] cpuidle: using governor menu
  419. [ 2.180000] [mmc_pm]: no sdio card used in configuration
  420. [ 2.180000] [mmc]: sunximmc_init
  421. [ 2.190000] [mmc]: sunxi mmc controller using config : 0x9
  422. [ 2.190000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  423. [ 2.200000] [mmc]: mmc 0 power off !!
  424. [ 2.200000] [mmc]: mmc0 Probe: base:0xe88e2000 irq:32 dma:0 pdes:0xe7030000, ret 0.
  425. [ 2.210000] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
  426. [ 2.220000] [mmc]: mmc 3 power off !!
  427. [ 2.220000] [mmc]: mmc3 Probe: base:0xe88e4000 irq:35 dma:0 pdes:0xe7034000, ret 0.
  428. [ 2.230000] usbcore: registered new interface driver usbhid
  429. [ 2.230000] usbhid: USB HID core driver
  430. [ 2.240000] logger: created 256K log 'log_main'
  431. [ 2.240000] logger: created 256K log 'log_events'
  432. [ 2.250000] logger: created 256K log 'log_radio'
  433. [ 2.250000] logger: created 256K log 'log_system'
  434. [ 2.260000] enter sun4i Audio codec!!!
  435. [ 2.260000] sun4i audio support initialized
  436. [ 2.270000] [sw_udc]: Set address 2
  437. [ 2.270000] sun4i Audio codec successfully loaded..
  438. [ 2.270000] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
  439. [ 2.280000] [SPDIF]sun4i-spdif cannot find any using configuration for controllers, return directly!
  440. [ 2.290000] [SPDIF]sndspdif cannot find any using configuration for controllers, return directly!
  441. [ 2.300000] [SPDIF]sun4i_sndspdif cannot find any using configuration for controllers, return directly!
  442. [ 2.310000] [I2S]sun4i-i2s cannot find any using configuration for controllers, return directly!
  443. [ 2.320000] WRN:L1055(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: dev->driver->setup failed. (-22)
  444. [ 2.330000] [I2S]sndi2s cannot find any using configuration for controllers, return directly!
  445. [ 2.330000] [sw_udc]: IRQ: reset
  446. [ 2.330000] [sw_udc]: irq: reset happen, throw away all urb
  447. [ 2.340000] [I2S]sun4i_sndi2s cannot find any using configuration for controllers, return directly!
  448. [ 2.350000] ALSA device list:
  449. [ 2.360000] #0: sun4i-CODEC Audio Codec
  450. [ 2.360000] #1: sun4i-sndhdmi
  451. [ 2.360000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  452. [ 2.370000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  453. [ 2.380000] [sw_udc]: IRQ: reset
  454. [ 2.380000] [sw_udc]: irq: reset happen, throw away all urb
  455. [ 2.390000] IPv4 over IPv4 tunneling driver
  456. [ 2.390000] ip_tables: (C) 2000-2006 Netfilter Core Team
  457. [ 2.400000] TCP cubic registered
  458. [ 2.400000] Initializing XFRM netlink socket
  459. [ 2.400000] NET: Registered protocol family 10
  460. [ 2.410000] input: Razer Razer Lachesis as /devices/platform/sw-ohci.2/usb4/4-1/4-1:1.0/input/input3
  461. [ 2.420000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  462. [ 2.430000] generic-usb 0003:1532:000C.0001: input: USB HID v1.00 Mouse [Razer Razer Lachesis] on usb-sw-ohci-1/input0
  463. [ 2.440000] IPv6 over IPv4 tunneling driver
  464. [ 2.440000] NET: Registered protocol family 17
  465. [ 2.450000] NET: Registered protocol family 15
  466. [ 2.450000] Bridge firewalling registered
  467. [ 2.450000] 802.1Q VLAN Support v1.8
  468. [ 2.460000] input: Razer Razer Lachesis as /devices/platform/sw-ohci.2/usb4/4-1/4-1:1.1/input/input4
  469. [ 2.470000] [mmc_pm]: No sdio card, please check your config !!
  470. [ 2.470000] VFP support v0.3:
  471. [ 2.480000] generic-usb 0003:1532:000C.0002: input: USB HID v1.00 Keyboard [Razer Razer Lachesis] on usb-sw-ohci-1/input1
  472. [ 2.490000] implementor 41 architecture 3 part 30 variant c rev 3
  473. [ 2.500000] registered taskstats version 1
  474. [ 2.500000] [sw_udc]: Set address 2
  475. [ 2.540000] WRN:L1055(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: dev->driver->setup failed. (-22)
  476. [ 2.560000] [sw_udc]: IRQ: suspend
  477. [ 2.560000] [sw_udc]: IRQ: reset
  478. [ 2.560000] [sw_udc]: irq: reset happen, throw away all urb
  479. [ 2.570000] I2C: i2c-3: HDMI I2C adapter
  480. [ 2.600000] ParseEDID
  481. [ 2.600000] [sw_udc]: IRQ: reset
  482. [ 2.600000] [sw_udc]: irq: reset happen, throw away all urb
  483. [ 2.650000] EDID version: 1.3
  484. [ 2.650000] PCLK=108000000 X 1280 1328 1440 1688 Y 1024 1025 1028 1066 fr 60 PP
  485. [ 2.660000] Using above mode as preferred EDID mode
  486. [ 2.660000] disp_clk: Could not find a matching pll-freq for 74600000 pclk
  487. [ 2.670000] disp_clk: Could not find a matching pll-freq for 97050000 pclk
  488. [ 2.670000] disp_clk: Could not find a matching pll-freq for 78800000 pclk
  489. [ 2.680000] disp_clk: Could not find a matching pll-freq for 53450000 pclk
  490. [ 2.690000] disp_clk: Could not find a matching pll-freq for 27100000 pclk
  491. [ 2.690000] disp_clk: Could not find a matching pll-freq for 26150000 pclk
  492. [ 2.700000] waited 0 ms for EDID info
  493. [ 2.710000] disp clks: lcd 108000000 pre_scale 1 hdmi 108000000 pll 270000000 2x 1
  494. [ 2.730000] [sw_udc]: Set address 2
  495. [ 2.750000] WRN:L1055(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: dev->driver->setup failed. (-22)
  496. [ 2.770000] [sw_udc]: IRQ: suspend
  497. [ 3.590000] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
  498. [ 3.600000] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
  499. [ 3.600000] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
  500. [ 3.610000] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
  501. [ 3.620000] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
  502. [ 3.630000] ===========================goodix_ts_init=====================
  503. [ 3.640000] ctp_fetch_sysconfig_para.
  504. [ 3.640000] ctp_fetch_sysconfig_para: ctp_unused.
  505. [ 3.640000] goodix_ts_init: err.
  506. [ 3.650000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  507. [ 3.650000] sunxi-rtc sunxi-rtc: read time 2013-4-23 18:23:50
  508. [ 3.660000] sunxi-rtc sunxi-rtc: setting system clock to 2013-04-23 18:23:50 UTC (1366741430)
  509. [ 3.670000] Freeing init memory: 164K
  510. [ 3.720000] init: to sleep 1 seconds.
  511. [ 4.730000] init: has waken up.
  512. [ 4.730000] Warning: this sunxi disp driver will see significant redesign.
  513. [ 4.740000] Applications using /dev/disp directly will break.
  514. [ 4.740000] For more information visit: http://linux-sunxi.org/Sunxi_disp_driver
  515. [ 4.750000] disp: process 1 (init) has skipped the version handshake.
  516. [ 4.760000] init: [william] hdmistatus = 1!
  517. [ 4.760000] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
  518. [ 4.770000] disp: process 1 (init) has skipped the version handshake.
  519. [ 4.780000] init: width = 1280
  520. [ 4.780000] init: height = 1024
  521. [ 4.780000] init: s.st_size = 3686400
  522. [ 4.790000] init: logo match failed!fbsize = 5242880
  523. [ 4.790000] init: command 'loglevel' r=0
  524. [ 4.800000] init: command 'export' r=0
  525. [ 4.800000] init: command 'export' r=0
  526. [ 4.800000] init: command 'export' r=0
  527. [ 4.810000] init: command 'export' r=0
  528. [ 4.810000] init: command 'export' r=0
  529. [ 4.820000] init: command 'export' r=0
  530. [ 4.820000] init: command 'export' r=0
  531. [ 4.820000] init: command 'export' r=0
  532. [ 4.830000] init: command 'export' r=0
  533. [ 4.830000] init: command 'symlink' r=0
  534. [ 4.830000] init: command 'symlink' r=0
  535. [ 4.840000] init: command 'symlink' r=0
  536. [ 4.840000] init: command 'mkdir' r=0
  537. [ 4.850000] init: command 'mount' r=0
  538. [ 4.850000] init: command 'mkdir' r=0
  539. [ 4.850000] init: command 'mkdir' r=0
  540. [ 4.860000] init: command 'mkdir' r=0
  541. [ 4.860000] init: command 'mkdir' r=0
  542. [ 4.860000] init: command 'mkdir' r=0
  543. [ 4.870000] init: command 'mkdir' r=0
  544. [ 4.870000] init: command 'mkdir' r=0
  545. [ 4.880000] init: command 'mkdir' r=0
  546. [ 4.880000] init: command 'mkdir' r=0
  547. [ 4.880000] init: command 'mount' r=0
  548. [ 4.890000] init: command 'mkdir' r=0
  549. [ 4.890000] init: command 'mount' r=0
  550. [ 4.890000] init: command 'write' r=0
  551. [ 4.900000] init: command 'write' r=-2
  552. [ 4.900000] init: command 'write' r=0
  553. [ 4.910000] init: command 'write' r=0
  554. [ 4.910000] init: command 'write' r=0
  555. [ 4.910000] init: command 'write' r=-2
  556. [ 4.920000] init: command 'write' r=0
  557. [ 4.920000] init: command 'mkdir' r=0
  558. [ 4.920000] init: command 'mount' r=0
  559. [ 4.930000] init: command 'chown' r=0
  560. [ 4.930000] init: command 'chown' r=0
  561. [ 4.940000] init: command 'chmod' r=0
  562. [ 4.940000] init: command 'write' r=-22
  563. [ 4.940000] init: command 'mkdir' r=0
  564. [ 4.950000] init: command 'chown' r=0
  565. [ 4.950000] init: command 'chmod' r=0
  566. [ 4.950000] init: command 'write' r=0
  567. [ 4.960000] init: command 'mkdir' r=0
  568. [ 4.960000] init: command 'chown' r=0
  569. [ 4.970000] init: command 'chmod' r=0
  570. [ 4.970000] init: command 'write' r=0
  571. [ 4.970000] init: command 'chmod' r=0
  572. [ 4.980000] init: processing action 0xca7b00 (fs)
  573. [ 5.110000] EXT4-fs (nandd): barriers disabled
  574. [ 5.120000] EXT4-fs (nandd): recovery complete
  575. [ 5.130000] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: barrier=0
  576. [ 5.140000] init: command 'mount' r=0
  577. [ 5.140000] init: command 'wait' r=0
  578. [ 5.220000] EXT4-fs (nande): barriers disabled
  579. [ 5.540000] EXT4-fs (nande): recovery complete
  580. [ 5.550000] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0
  581. [ 5.550000] init: command 'mount' r=0
  582. [ 5.560000] init: command 'setupfs' r=0
  583. [ 5.560000] init: do_umount: /data
  584. [ 5.580000] init: command 'umount' r=0
  585. [ 5.670000] init: command 'exec' r=0
  586. [ 5.790000] EXT4-fs (nande): barriers disabled
  587. [ 5.790000] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc
  588. [ 5.800000] init: command 'exec' r=0
  589. [ 5.940000] EXT4-fs (nandh): barriers disabled
  590. [ 6.280000] EXT4-fs (nandh): recovery complete
  591. [ 6.280000] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0
  592. [ 6.290000] init: command 'mount' r=0
  593. [ 6.290000] init: command 'setupfs' r=0
  594. [ 6.300000] init: do_umount: /cache
  595. [ 6.310000] init: command 'umount' r=0
  596. [ 6.320000] init: command 'exec' r=0
  597. [ 6.340000] EXT4-fs (nandh): barriers disabled
  598. [ 6.340000] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc
  599. [ 6.350000] init: command 'exec' r=0
  600. [ 6.360000] init: dont need format /dev/block/nandi
  601. [ 6.360000] init: command 'format_userdata' r=1
  602. [ 6.370000] init: command 'export' r=0
  603. [ 6.370000] init: dont need format /dev/block/nandi
  604. [ 6.380000] init: command 'format_userdata' r=1
  605. [ 6.380000] init: command 'mkdir' r=0
  606. [ 6.390000] init: command 'mount' r=0
  607. [ 6.390000] init: processing action 0xca2398 (post-fs)
  608. [ 6.400000] init: command 'chown' r=0
  609. [ 6.400000] init: command 'chmod' r=0
  610. [ 6.410000] init: command 'chown' r=-2
  611. [ 6.410000] init: command 'chmod' r=-2
  612. [ 6.410000] init: command 'chown' r=0
  613. [ 6.420000] init: command 'chmod' r=0
  614. [ 6.420000] init: command 'chown' r=0
  615. [ 6.430000] init: command 'chmod' r=0
  616. [ 6.430000] init: command 'chown' r=0
  617. [ 6.430000] init: command 'chmod' r=0
  618. [ 6.440000] init: command 'mkdir' r=0
  619. [ 6.440000] init: processing action 0xca2588 (post-fs-data)
  620. [ 6.450000] init: command 'chown' r=0
  621. [ 6.450000] init: command 'chmod' r=0
  622. [ 6.470000] init: command 'mkdir' r=0
  623. [ 6.470000] init: command 'copy' r=-1
  624. [ 6.480000] init: command 'chown' r=-2
  625. [ 6.480000] init: command 'chmod' r=-2
  626. [ 6.490000] init: command 'copy' r=-1
  627. [ 6.490000] init: command 'chown' r=-2
  628. [ 6.490000] init: command 'chmod' r=-2
  629. [ 6.500000] init: command 'write' r=-2
  630. [ 6.500000] init: command 'mkdir' r=0
  631. [ 6.510000] init: command 'mkdir' r=0
  632. [ 6.510000] init: command 'mkdir' r=0
  633. [ 6.510000] init: command 'mkdir' r=0
  634. [ 6.520000] init: command 'mkdir' r=0
  635. [ 6.520000] init: command 'mkdir' r=0
  636. [ 6.520000] init: command 'mkdir' r=0
  637. [ 6.530000] init: command 'mkdir' r=0
  638. [ 6.530000] init: command 'mkdir' r=0
  639. [ 6.540000] init: command 'chmod' r=-2
  640. [ 6.540000] init: command 'mkdir' r=0
  641. [ 6.540000] init: command 'chown' r=0
  642. [ 6.550000] init: command 'mkdir' r=0
  643. [ 6.550000] init: command 'chmod' r=0
  644. [ 6.560000] init: command 'chmod' r=0
  645. [ 6.560000] init: command 'chmod' r=0
  646. [ 6.560000] init: command 'chmod' r=0
  647. [ 6.570000] init: command 'chmod' r=0
  648. [ 6.570000] init: command 'mkdir' r=0
  649. [ 6.580000] init: command 'mkdir' r=0
  650. [ 6.580000] init: command 'mkdir' r=0
  651. [ 6.580000] init: command 'mkdir' r=0
  652. [ 6.590000] init: command 'mkdir' r=0
  653. [ 6.590000] init: command 'mkdir' r=0
  654. [ 6.590000] init: command 'mkdir' r=0
  655. [ 6.600000] init: command 'mkdir' r=0
  656. [ 6.600000] init: command 'mkdir' r=0
  657. [ 6.610000] init: command 'chown' r=0
  658. [ 6.610000] init: command 'chmod' r=0
  659. [ 6.610000] init: command 'mkdir' r=0
  660. [ 6.620000] init: command 'mkdir' r=0
  661. [ 6.620000] init: command 'chown' r=0
  662. [ 6.620000] init: command 'chmod' r=0
  663. [ 6.630000] init: command 'chown' r=0
  664. [ 6.630000] init: command 'chmod' r=0
  665. [ 6.640000] init: processing action 0xca8278 (property_service_init)
  666. [ 6.640000] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
  667. [ 6.650000] init: command 'property_service_init' r=0
  668. [ 6.660000] init: processing action 0xca82c0 (signal_init)
  669. [ 6.660000] init: command 'signal_init' r=0
  670. [ 6.670000] init: processing action 0xca8308 (check_startup)
  671. [ 6.670000] init: command 'check_startup' r=0
  672. [ 6.680000] init: processing action 0xca2d78 (boot)
  673. [ 6.700000] init: command 'chown' r=0
  674. [ 6.700000] init: command 'chmod' r=0
  675. [ 6.700000] init: command 'ifup' r=0
  676. [ 6.710000] init: command 'hostname' r=0
  677. [ 6.710000] init: command 'domainname' r=0
  678. [ 6.720000] init: command 'setrlimit' r=0
  679. [ 6.720000] init: command 'write' r=0
  680. [ 6.720000] init: command 'write' r=0
  681. [ 6.730000] init: command 'chown' r=0
  682. [ 6.730000] init: command 'chmod' r=0
  683. [ 6.730000] init: command 'chown' r=0
  684. [ 6.740000] init: command 'chmod' r=0
  685. [ 6.740000] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  686. [ 6.750000] init: command 'write' r=0
  687. [ 6.750000] init: command 'write' r=0
  688. [ 6.760000] init: command 'write' r=0
  689. [ 6.760000] init: command 'chown' r=-2
  690. [ 6.770000] init: command 'chown' r=-2
  691. [ 6.770000] init: command 'chown' r=-2
  692. [ 6.770000] init: command 'chown' r=-2
  693. [ 6.780000] init: command 'chown' r=-2
  694. [ 6.780000] init: command 'chown' r=0
  695. [ 6.780000] init: command 'chown' r=0
  696. [ 6.790000] init: command 'chown' r=0
  697. [ 6.790000] init: command 'chmod' r=0
  698. [ 6.800000] init: command 'chmod' r=0
  699. [ 6.800000] init: command 'chmod' r=0
  700. [ 6.800000] init: command 'chown' r=0
  701. [ 6.810000] init: command 'chmod' r=0
  702. [ 6.810000] init: command 'chown' r=-2
  703. [ 6.810000] init: command 'chown' r=-2
  704. [ 6.820000] init: command 'chown' r=-2
  705. [ 6.820000] init: command 'chown' r=-2
  706. [ 6.830000] init: command 'chown' r=-2
  707. [ 6.830000] init: command 'chown' r=-2
  708. [ 6.830000] init: command 'chown' r=-2
  709. [ 6.840000] init: command 'chown' r=-2
  710. [ 6.840000] init: command 'chown' r=-2
  711. [ 6.840000] init: command 'chown' r=-2
  712. [ 6.850000] init: command 'chown' r=-2
  713. [ 6.850000] init: command 'chown' r=-2
  714. [ 6.860000] init: command 'chown' r=-2
  715. [ 6.860000] init: command 'chown' r=-2
  716. [ 6.860000] init: command 'chown' r=-2
  717. [ 6.870000] init: command 'chown' r=-2
  718. [ 6.870000] init: command 'chown' r=-2
  719. [ 6.870000] init: command 'chown' r=-2
  720. [ 6.880000] init: command 'chown' r=-2
  721. [ 6.880000] init: command 'chown' r=0
  722. [ 6.890000] init: command 'chown' r=0
  723. [ 6.890000] init: command 'chown' r=0
  724. [ 6.890000] init: command 'chown' r=0
  725. [ 6.900000] init: command 'chown' r=0
  726. [ 6.900000] init: command 'chown' r=0
  727. [ 6.900000] init: command 'chown' r=0
  728. [ 6.910000] init: command 'setprop' r=0
  729. [ 6.910000] init: command 'setprop' r=0
  730. [ 6.920000] init: command 'setprop' r=0
  731. [ 6.920000] init: command 'setprop' r=0
  732. [ 6.920000] init: command 'setprop' r=0
  733. [ 6.930000] init: command 'setprop' r=0
  734. [ 6.930000] init: command 'setprop' r=0
  735. [ 6.940000] init: command 'setprop' r=0
  736. [ 6.940000] init: starting 'console'
  737. [ 6.940000] init: starting 'servicemanager'
  738. [ 6.950000] init: starting 'vold'
  739. [ 6.950000] init: command 'class_start' r=0
  740. [ 6.960000] init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'
  741. [ 6.970000] init: starting 'netd'
  742. [ 6.970000] init: starting 'debuggerd'
  743. [ 6.980000] init: Created socket '/dev/socket/dnsproxyd' with mode '660', user '0', group '3003'
  744. [ 6.980000] init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'
  745. [ 6.990000] init: starting 'surfaceflinger'
  746. [ 7.000000] init: starting 'zygote'
  747. [ 7.000000] init: starting 'drm'
  748. [ 7.010000] init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
  749. [ 7.020000] init: starting 'media'
  750. [ 7.020000] init: starting 'netshare'
  751. [ 7.020000] init: starting 'dbus'
  752. [ 7.030000] init: Created socket '/dev/socket/dbus' with mode '660', user '1002', group '1002'
  753. [ 7.040000] init: starting 'installd'
  754. [ 7.040000] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  755. [ 7.050000] init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'
  756. [ 7.060000] init: starting 'keystore'
  757. [ 7.070000] init: starting 'u3gmonitor'
  758. [ 7.070000] init: Created socket '/dev/socket/keystore' with mode '666', user '0', group '0'
  759. [ 7.080000] init: starting 'ril-daemon'
  760. [ 7.090000] init: starting 'securefile'
  761. [ 7.090000] init: starting 'isomountmanager'
  762. [ 7.100000] init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'
  763. [ 7.110000] init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
  764. [ 7.120000] init: command 'class_start' r=0
  765. [ 7.120000] init: processing action 0xca7e38 (boot)
  766. [ 7.280000] UMP<2>: Inserting UMP device driver. Compiled: Apr 23 2013, time: 16:48:32
  767. [ 7.290000] UMP<2>: Using OS memory backend, allocation limit: 134217728
  768. [ 7.300000] UMP: UMP device driver loaded
  769. [ 7.300000] init: command 'insmod' r=0
  770. [ 7.550000] mali: use config clk_div 4
  771. [ 7.550000] mali: clk_div 4
  772. [ 7.550000] Mali: mali clock set completed, clock is 240000000 Hz
  773. [ 7.560000] mali: use config clk_div 4
  774. [ 7.560000] mali: clk_div 4
  775. [ 7.570000] Mali: mali clock set completed, clock is 240000000 Hz
  776. [ 7.570000] Mali: Mali device driver loaded
  777. [ 7.580000] init: command 'insmod' r=0
  778. [ 7.580000] init: processing action 0xca8350 (queue_propety_triggers)
  779. [ 7.590000] init: command 'queue_propety_triggers' r=0
  780. [ 7.600000] init: processing action 0xca3780 (nonencrypted)
  781. [ 7.600000] init: command 'class_start' r=0
  782. [ 7.610000] init: processing action 0xca3d68 (property:persist.sys.usb.config=*)
  783. [ 7.610000] init: command 'setprop' r=0
  784. [ 7.620000] init: processing action 0xca3f38 (property:ro.debuggable=1)
  785. [ 7.620000] init: command 'start' r=0
  786. [ 7.630000] init: processing action 0xca6f60 (property:sys.usb.config=mass_storage,adb)
  787. [ 7.640000] android_usb: already disabled
  788. [ 7.640000] init: command 'write' r=0
  789. [ 7.640000] init: command 'write' r=0
  790. [ 7.650000] init: command 'write' r=0
  791. [ 7.650000] init: command 'write' r=0
  792. [ 7.660000] ep_matches, wrn: endpoint already claimed, ep(0xc07b5d58, 0xe7bdc800, ep1-bulk)
  793. [ 7.660000] adb_bind_config
  794. [ 7.670000] ep_matches, wrn: endpoint already claimed, ep(0xc07b5d58, 0xe7bdc800, ep1-bulk)
  795. [ 7.680000] ep_matches, wrn: endpoint already claimed, ep(0xc07b5d98, 0xe7bdc800, ep2-bulk)
  796. [ 7.680000] ep_matches, wrn: endpoint already claimed, ep(0xc07b5d58, 0xe7bdc800, ep1-bulk)
  797. [ 7.690000] ep_matches, wrn: endpoint already claimed, ep(0xc07b5d98, 0xe7bdc800, ep2-bulk)
  798. [ 7.700000] ep_matches, wrn: endpoint already claimed, ep(0xc07b5dd8, 0xe7bd0f00, ep3-bulk)
  799. [ 7.710000] [sw_udc]: alloc request: ep(0xc07b5e18, ep4-bulk, 512), req(0xe723e480)
  800. [ 7.720000] [sw_udc]: alloc request: ep(0xc07b5dd8, ep3-bulk, 512), req(0xe723e4c0)
  801. [ 7.730000] [sw_udc]: alloc request: ep(0xc07b5dd8, ep3-bulk, 512), req(0xe723e500)
  802. [ 7.730000] [sw_udc]: alloc request: ep(0xc07b5dd8, ep3-bulk, 512), req(0xe723e540)
  803. [ 7.740000] [sw_udc]: alloc request: ep(0xc07b5dd8, ep3-bulk, 512), req(0xe723e580)
  804. [ 7.750000] [sw_udc]: sw_udc_pullup, is_on = 1
  805. [ 7.760000] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED
  806. [ 7.760000] [sw_udc]: usbd_start_work
  807. [ 7.760000] init: command 'write' r=0
  808. [ 7.770000] init: starting 'adbd'
  809. [ 7.770000] init: command 'start' r=0
  810. [ 7.780000] adb_open
  811. [ 7.780000] init: command 'setprop' r=0
  812. [ 9.000000] UMP<2>: New session opened
  813. [ 9.350000] disp: process 112 (SurfaceFlinger) has skipped the version handshake.
  814. [ 9.390000] disp: process 112 (SurfaceFlinger) has skipped the version handshake.
  815. [ 9.400000] init: starting 'bootanim'
  816. [ 9.540000] init: waitpid returned pid 86, status = 00000000
  817. [ 9.560000] init: untracked pid 86 exited
  818. [ 9.620000] UMP<2>: New session opened
  819. [ 16.290000] warning: `zygote' uses 32-bit capabilities (legacy support in use)
  820. [ 20.630000] disp: process 150 (er.ServerThread) has skipped the version handshake.
  821. [ 20.670000] request_suspend_state: wakeup (3->0) at 20670249826 (2013-04-23 18:24:07.492436008 UTC)
  822. [ 20.830000] UMP<2>: New session opened
  823. [ 20.970000] wemac wemac.0: WARNING: no IRQ resource flags set.
  824. [ 21.130000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
  825. [ 21.260000] acc_open
  826. [ 21.270000] acc_release
  827. [ 21.450000] init: starting 'dhcpcd_eth'
  828. [ 22.040000] usbcore: registered new interface driver rtl8192cu
  829. [ 22.070000] alarm_release: clear alarm, pending 0
  830. [ 22.090000] alarm_release: clear alarm, pending 0
  831. [ 22.090000] UMP<2>: Session closed
  832. [ 22.100000] init: waitpid returned pid 74, status = 00000009
  833. [ 22.110000] init: process 'zygote', pid 74 exited
  834. [ 22.110000] init: process 'zygote' killing any children in process group
  835. [ 22.120000] request_suspend_state: wakeup (0->0) at 22126525166 (2013-04-23 18:24:08.948711515 UTC)
  836. [ 22.130000] init: service 'media' is being killed
  837. [ 22.140000] init: starting 'media'
  838. [ 22.140000] init: service 'netd' is being killed
  839. [ 22.170000] init: starting 'netd'
  840. [ 22.170000] init: waitpid returned pid 71, status = 00000009
  841. [ 22.180000] init: Created socket '/dev/socket/dnsproxyd' with mode '660', user '0', group '3003'
  842. [ 22.200000] init: untracked pid 71 exited
  843. [ 22.200000] init: waitpid returned pid 76, status = 00000009
  844. [ 22.210000] init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'
  845. [ 22.240000] init: untracked pid 76 exited
  846. [ 22.240000] init: waitpid returned pid 214, status = 00000009
  847. [ 22.260000] init: untracked pid 214 exited
  848. [ 22.260000] init: starting 'zygote'
  849. [ 22.280000] init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
  850. [ 27.520000] disp: process 285 (er.ServerThread) has skipped the version handshake.
  851. [ 27.540000] request_suspend_state: wakeup (0->0) at 27542957886 (2013-04-23 18:24:14.365143860 UTC)
  852. [ 27.930000] acc_open
  853. [ 27.940000] acc_release
  854. [ 28.100000] usbcore: deregistering interface driver rtl8192cu
  855. [ 28.200000] binder: send failed reply for transaction 3680 to 335:335
  856. [ 28.210000] alarm_release: clear alarm, pending 0
  857. [ 28.210000] alarm_release: clear alarm, pending 0
  858. [ 28.220000] init: waitpid returned pid 243, status = 00000009
  859. [ 28.230000] init: process 'zygote', pid 243 exited
  860. [ 28.240000] init: process 'zygote' killing any children in process group
  861. [ 28.240000] request_suspend_state: wakeup (0->0) at 28247074444 (2013-04-23 18:24:15.069257709 UTC)
  862. [ 28.260000] init: service 'media' is being killed
  863. [ 28.260000] init: starting 'media'
  864. [ 28.270000] init: service 'netd' is being killed
  865. [ 28.280000] init: starting 'netd'
  866. [ 28.280000] init: waitpid returned pid 227, status = 00000009
  867. [ 28.290000] init: Created socket '/dev/socket/dnsproxyd' with mode '660', user '0', group '3003'
  868. [ 28.310000] init: untracked pid 227 exited
  869. [ 28.310000] init: waitpid returned pid 228, status = 00000009
  870. [ 28.320000] init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'
  871. [ 28.340000] init: untracked pid 228 exited
  872. [ 28.340000] init: waitpid returned pid 335, status = 00000009
  873. [ 28.360000] init: untracked pid 335 exited
  874. [ 28.360000] init: starting 'zygote'
  875. [ 28.360000] init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!