Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Linux version 2.6.31.8 (soho@bsoho127.lss.emc.com) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #1 Mon Feb 13 16:57:10 EST 2012
- CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
- CPU: VIVT data cache, VIVT instruction cache
- Machine: Feroceon-KW
- Using UBoot passing parameters structure
- Memory policy: ECC disabled, Data cache writeback
- On node 0 totalpages: 65536
- free_area_init_node: node 0, pgdat c04d2968, node_mem_map c04f8000
- Normal zone: 512 pages used for memmap
- Normal zone: 0 pages reserved
- Normal zone: 65024 pages, LIFO batch:15
- Built 1 zonelists in Zone order, mobility grouping off. Total pages: 65024
- Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0x0(uboot),0x20000@0xa0000(env),0x300000@0x100000(zImage),0x300000@0x540000(initrd),128m@0x0(flash)
- PID hash table entries: 1024 (order: 10, 4096 bytes)
- Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- Memory: 256MB = 256MB total
- Memory: 245632KB available (4592K code, 316K data, 136K init, 0K highmem)
- Hierarchical RCU implementation.
- NR_IRQS:128
- Console: colour dummy device 80x30
- Calibrating delay loop... 992.87 BogoMIPS (lpj=4964352)
- Mount-cache hash table entries: 512
- CPU: Testing write buffer coherency: ok
- xor: measuring software checksum speed
- arm4regs : 869.600 MB/sec
- 8regs : 684.400 MB/sec
- 32regs : 668.800 MB/sec
- xor: using function: arm4regs (869.600 MB/sec)
- NET: Registered protocol family 16
- Feroceon L2: Enabling L2
- Feroceon L2: Cache support initialised.
- CPU Interface
- -------------
- SDRAM_CS0 ....base 00000000, size 256MB
- SDRAM_CS1 ....disable
- SDRAM_CS2 ....disable
- SDRAM_CS3 ....disable
- PEX0_MEM ....base e0000000, size 128MB
- PEX0_IO ....base f2000000, size 1MB
- PEX1_MEM ....no such
- PEX1_IO ....no such
- INTER_REGS ....base f1000000, size 1MB
- NFLASH_CS ....base fa000000, size 2MB
- SPI_CS ....base f4000000, size 16MB
- BOOT_ROM_CS ....no such
- DEV_BOOTCS ....no such
- CRYPT_ENG ....base f0000000, size 2MB
- Marvell Development Board (LSP Version KW_LSP_5.1.3_patch18)-- RD-88F6281A Soc: 88F6281 A0 LE
- Detected Tclk 200000000 and SysClk 333333333
- MV Buttons Device Load
- Marvell USB EHCI Host controller #0: c8040740
- PEX0 interface detected no Link.
- PCI: bus0: Fast back to back transfers enabled
- mvPexLocalBusNumSet: ERR. Invalid PEX interface 1
- bio: create slab <bio-0> at 0
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- raid6: int32x1 76 MB/s
- raid6: int32x2 91 MB/s
- raid6: int32x4 100 MB/s
- raid6: int32x8 78 MB/s
- raid6: using algorithm int32x4 (100 MB/s)
- cfg80211: Calling CRDA to update world regulatory domain
- NET: Registered protocol family 2
- IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
- TCP: Hash tables configured (established 8192 bind 8192)
- TCP reno registered
- NET: Registered protocol family 1
- Trying to unpack rootfs image as initramfs...
- rootfs image is not initramfs (no cpio magic); looks like an initrd
- Freeing initrd memory: 2728K
- rtc mv_rtc: rtc core: registered kw-rtc as rtc0
- RTC registered
- mp_lm63: device lm63 found
- mp_lm63: Alert/tach pin configured for tachometer input
- mp_lm63: PWM clock 1.4 kHz, output frequency 22 Hz
- mp_lm63: PWM output active high, auto mode
- mp_lm63: Module loaded.
- cpufreq: Init kirkwood cpufreq driver
- cpufreq: High frequency: 1000000KHz - Low frequency: 333333KHz
- cpufreq: Setting CPU Frequency to 1000000 KHz
- cpufreq: Setting PowerSaveState to off
- cpufreq: Setting CPU Frequency to 1000000 KHz
- cpufreq: Setting PowerSaveState to off
- XOR registered 4 channels
- XOR 2nd invalidate WA enabled
- cesadev_init(c000ed48)
- mvCesaInit: sessions=640, queue=64, pSram=f0000000
- MV Buttons Driver Load
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
- msgmni has been set to 485
- alg: No test for cipher_null (cipher_null-generic)
- alg: No test for ecb(cipher_null) (ecb-cipher_null)
- alg: No test for digest_null (digest_null-generic)
- alg: No test for compress_null (compress_null-generic)
- alg: No test for stdrng (krng)
- alg: No test for hmac(digest_null) (hmac(digest_null-generic))
- async_tx: api initialized (sync-only)
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- io scheduler noop registered
- io scheduler anticipatory registered (default)
- Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
- console [ttyS0] enabled
- brd: module loaded
- loop: module loaded
- Integrated Sata device found
- IRQ 21/mvSata: IRQF_DISABLED is not guaranteed on shared IRQs
- scsi0 : Marvell SCSI to SATA adapter
- scsi1 : Marvell SCSI to SATA adapter
- [0 0]: SATA disk found
- [0 0]: Disk ready
- [0 0]: Sata device ready
- [0 1]: SATA disk found
- [0 1]: Disk ready
- [0 1]: Sata device ready
- scsi 0:0:0:0: Direct-Access Seagate ST31000520AS CC38 PQ: 0 ANSI: 5
- Linux IAL (ERROR) [0 0 0]: set device max sectors to 2048
- scsi 1:0:0:0: Direct-Access Seagate ST31000520AS CC38 PQ: 0 ANSI: 5
- Linux IAL (ERROR) [0 1 0]: set device max sectors to 2048
- sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
- sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- sd 0:0:0:0: [sda] 0-byte physical blocks
- SAL (ERROR) 0 0 0 :Scsi command completed. pScb c44e6de0, ScsiStatus 2 completionStatus MV_SCSI_COMPLETION_BAD_SCSI_COMMAND
- SAL (ERROR) CDB:12 1 0 0 ff 0
- SAL (ERROR) Sense Data:72 5 24 0 0 0 0 c 0 0 0 0 0 0 0 0 0 0 0 0
- SAL (ERROR) 0 0 0 :Scsi command completed. pScb c44e6de0, ScsiStatus 2 completionStatus MV_SCSI_COMPLETION_BAD_SCSI_COMMAND
- SAL (ERROR) CDB:12 1 0 0 ff 0
- SAL (ERROR) Sense Data:72 5 24 0 0 0 0 c 0 0 0 0 0 0 0 0 0 0 0 0
- sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512.
- sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- sd 1:0:0:0: [sdb] 0-byte physical blocks
- SAL (ERROR) 0 1 0 :Scsi command completed. pScb c44e6de0, ScsiStatus 2 completionStatus MV_SCSI_COMPLETION_BAD_SCSI_COMMAND
- SAL (ERROR) CDB:12 1 0 0 ff 0
- SAL (ERROR) Sense Data:72 5 24 0 0 0 0 c 0 0 0 0 0 0 0 0 0 0 0 0
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- sd 1:0:0:0: Attached scsi generic sg1 type 0
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
- sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
- SAL (ERROR) 0 0 0 :Scsi command completed. pScb c44e6be0, ScsiStatus 2 completionStatus MV_SCSI_COMPLETION_BAD_SCSI_COMMAND
- SAL (ERROR) CDB:12 1 0 0 ff 0
- SAL (ERROR) Sense Data:72 5 24 0 0 0 0 c 0 0 0 0 0 0 0 0 0 0 0 0
- SAL (ERROR) 0 0 0 :Scsi command completed. pScb c44e6be0, ScsiStatus 2 completionStatus MV_SCSI_COMPLETION_BAD_SCSI_COMMAND
- SAL (ERROR) CDB:12 1 0 0 ff 0
- SAL (ERROR) Sense Data:72 5 24 0 0 0 0 c 0 0 0 0 0 0 0 0 0 0 0 0
- Loading Marvell Ethernet Driver:
- o Cached descriptors in DRAM
- o DRAM SW cache-coherency
- o 2 Giga ports supported
- o Single RX Queue support - ETH_DEF_RXQ=0
- o Single TX Queue support - ETH_DEF_TXQ=0
- o TCP segmentation offload (TSO) supported
- o Receive checksum offload supported
- o Network Fast Processing (Routing) supported - (Disabled)
- o Driver ERROR statistics enabled
- o Driver INFO statistics enabled
- o Proc tool API enabled
- o SKB Reuse supported - (Disabled)
- o SKB Recycle supported - (Disabled)
- o Rx descripors: q0=128
- o Tx descripors: q0=532
- o Loading network interface(s):
- o register under mv88fx_eth platform
- SAL (ERROR) 0 1 0 :Scsi command completed. pScb c8576f60, ScsiStatus 2 completionStatus MV_SCSI_COMPLETION_BAD_SCSI_COMMAND
- SAL (ERROR) CDB:12 1 0 0 ff 0
- SAL (ERROR) Sense Data:72 5 24 0 0 0 0 c 0 0 0 0 0 0 0 0 0 0 0 0
- o eth0, ifindex = 2, GbE port = 0
- sda:
- sd 1:0:0:0: [sdb] Write Protect is off
- sd 1:0:0:0: [sdb] Mode Sense: 23 00 10 00
- o eth1, ifindex = 3, GbE port = 1
- mvFpRuleDb (c857a000): 2048 entries, 8192 bytes
- Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
- Copyright (c) 1999-2006 Intel Corporation.
- e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
- e1000e: Copyright (c) 1999-2008 Intel Corporation.
- sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
- sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512.
- SAL (ERROR) 0 1 0 :Scsi command completed. pScb c85903c0, ScsiStatus 2 completionStatus MV_SCSI_COMPLETION_BAD_SCSI_COMMAND
- SAL (ERROR) CDB:12 1 0 0 ff 0
- SAL (ERROR) Sense Data:72 5 24 0 0 0 0 c 0 0 0 0 0 0 0 0 0 0 0 0
- SAL (ERROR) 0 1 0 :Scsi command completed. pScb c85903c0, ScsiStatus 2 completionStatus MV_SCSI_COMPLETION_BAD_SCSI_COMMAND
- SAL (ERROR) CDB:12 1 0 0 ff 0
- SAL (ERROR) Sense Data:72 5 24 0 0 0 0 c 0 0 0 0 0 0 0 0 0 0 0 0
- e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
- e100: Copyright(c) 1999-2006 Intel Corporation
- tun: Universal TUN/TAP device driver, 1.6
- tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- NAND device: Manufacturer ID: 0xad, Chip ID: 0x75 (Hynix NAND 32MiB 3,3V 8-bit)
- Scanning device for bad blocks
- mtd: nand_mtd: partitioning exceeds flash size, truncating
- 4 cmdlinepart partitions found on MTD device nand_mtd
- Using command line partition definition
- Creating 4 MTD partitions on "nand_mtd":
- 0x000000000000-0x0000000c0000 : "uboot"
- sdb:
- 0x0000000a0000-0x0000000c0000 : "env"
- 0x000000100000-0x000000400000 : "zImage"
- sda1 sda2
- sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
- SAL (ERROR) 0 0 0 :Scsi command completed. pScb c85904c0, ScsiStatus 2 completionStatus MV_SCSI_COMPLETION_BAD_SCSI_COMMAND
- SAL (ERROR) CDB:12 1 0 0 ff 0
- SAL (ERROR) Sense Data:72 5 24 0 0 0 0 c 0 0 0 0 0 0 0 0 0 0 0 0
- SAL (ERROR) 0 0 0 :Scsi command completed. pScb c85904c0, ScsiStatus 2 completionStatus MV_SCSI_COMPLETION_BAD_SCSI_COMMAND
- SAL (ERROR) CDB:12 1 0 0 ff 0
- SAL (ERROR) Sense Data:72 5 24 0 0 0 0 c 0 0 0 0 0 0 0 0 0 0 0 0
- 0x000000540000-0x000000840000 : "initrd"
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
- ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
- sd 0:0:0:0: [sda] Attached SCSI disk
- sdb1 sdb2
- sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512.
- SAL (ERROR) 0 1 0 :Scsi command completed. pScb c8590340, ScsiStatus 2 completionStatus MV_SCSI_COMPLETION_BAD_SCSI_COMMAND
- SAL (ERROR) CDB:12 1 0 0 ff 0
- SAL (ERROR) Sense Data:72 5 24 0 0 0 0 c 0 0 0 0 0 0 0 0 0 0 0 0
- SAL (ERROR) 0 1 0 :Scsi command completed. pScb c8590340, ScsiStatus 2 completionStatus MV_SCSI_COMPLETION_BAD_SCSI_COMMAND
- SAL (ERROR) CDB:12 1 0 0 ff 0
- SAL (ERROR) Sense Data:72 5 24 0 0 0 0 c 0 0 0 0 0 0 0 0 0 0 0 0
- ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
- sd 1:0:0:0: [sdb] Attached SCSI disk
- ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- uhci_hcd: USB Universal Host Controller Interface driver
- usbcore: registered new interface driver usblp
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- usbcore: registered new interface driver ums-datafab
- usbcore: registered new interface driver ums-freecom
- usbcore: registered new interface driver ums-jumpshot
- usbcore: registered new interface driver ums-sddr09
- usbcore: registered new interface driver ums-sddr55
- usbcore: registered new interface driver ums-usbat
- mice: PS/2 mouse device common for all mice
- i2c /dev entries driver
- md: linear personality registered for level -1
- md: raid0 personality registered for level 0
- md: raid1 personality registered for level 1
- md: raid6 personality registered for level 6
- md: raid5 personality registered for level 5
- md: raid4 personality registered for level 4
- device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- dm_crypt using the OCF package.
- cpufreq: Setting CPU Frequency to 1000000 KHz
- cpufreq: Setting PowerSaveState to off
- TCP cubic registered
- NET: Registered protocol family 17
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- rtc mv_rtc: setting system clock to 2012-05-25 03:31:10 UTC (1337916670)
- md: Waiting for all devices to be available before autodetect
- md: If you don't use raid, use raid=noautodetect
- md: Autodetecting RAID arrays.
- md: Scanned 0 and added 0 devices.
- md: autorun ...
- md: ... autorun DONE.
- RAMDISK: gzip image found at block 0
- usb 1-1: new high speed USB device using ehci_marvell and address 2
- usb 1-1: configuration #1 chosen from 1 choice
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 4 ports detected
- VFS: Mounted root (ext2 filesystem) on device 1:0.
- md: md0 stopped.
- md: bind<sdb1>
- md: bind<sda1>
- raid1: raid set md0 active with 2 out of 2 mirrors
- md0: detected capacity change from 0 to 21484339200
- md0: unknown partition table
- EXT2-fs warning: checktime reached, running e2fsck is recommended
- Bluetooth: Core ver 2.15
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: Generic Bluetooth USB driver ver 0.5
- usbcore: registered new interface driver btusb
- usbcore: registered new interface driver hiddev
- usbcore: registered new interface driver usbhid
- usbhid: v2.6:USB HID core driver
- Bluetooth: L2CAP ver 2.13
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: RFCOMM socket layer initialized
- Bluetooth: RFCOMM ver 1.11
- ufsd: module license 'Commercial product' taints kernel.
- Disabling lock debugging due to kernel taint
- ufsd: driver 8.5 (Apr 16 2012 15:00:27) LBD=ON with delayalloc with ioctl loaded at bf0ae000
- NTFS support included
- Hfs+/HfsX support included
- Built for: EMC_ix2_2
- SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
- SGI XFS Quota Management subsystem
- Freeing init memory: 136K
- eth1: link down
- eth1: started
- eth1: link up, full duplex, speed 1 Gbps
- md: md1 stopped.
- md: bind<sdb2>
- md: bind<sda2>
- raid1: raid set md1 active with 2 out of 2 mirrors
- md1: detected capacity change from 0 to 978720243712
- md1: unknown partition table
- XFS mounting filesystem dm-1
- Ending clean XFS mount for filesystem: dm-1
- XFS mounting filesystem dm-2
- Ending clean XFS mount for filesystem: dm-2
- Adding 524280k swap on /mnt/system/swapfile. Priority:-1 extents:4 across:524312k
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement