Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.16.3-1-ARCH] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda ES.2
- Device Model: ST31000340NS
- Serial Number: 9QJ79RSB
- LU WWN Device Id: 5 000c50 01fb516ac
- Firmware Version: G005
- User Capacity: 1 000 204 886 016 bytes [1,00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 7200 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 2.6, 3.0 Gb/s
- Local Time is: Tue Sep 23 19:21:18 2014 UTC
- ==> WARNING: There are known problems with these drives,
- see the following Seagate web pages:
- http://knowledge.seagate.com/articles/en_US/FAQ/207931en
- http://knowledge.seagate.com/articles/en_US/FAQ/207963en
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: FAILED!
- Drive failure expected in less than 24 hours. SAVE ALL DATA.
- See vendor-specific Attribute list for failed Attributes.
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 625) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 219) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x103d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 051 048 044 Pre-fail Always - 179493484
- 3 Spin_Up_Time 0x0003 099 095 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 212
- 5 Reallocated_Sector_Ct 0x0033 032 032 036 Pre-fail Always FAILING_NOW 1394
- 7 Seek_Error_Rate 0x000f 057 054 030 Pre-fail Always - 64432149621
- 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 690
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 192
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1378
- 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 17180131332
- 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 071 063 045 Old_age Always - 29 (Min/Max 28/30)
- 194 Temperature_Celsius 0x0022 029 040 000 Old_age Always - 29 (0 17 0 0 0)
- 195 Hardware_ECC_Recovered 0x001a 038 029 000 Old_age Always - 179493484
- 197 Current_Pending_Sector 0x0012 069 069 000 Old_age Always - 651
- 198 Offline_Uncorrectable 0x0010 069 069 000 Old_age Offline - 651
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 5
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 5 occurred at disk power-on lifetime: 685 hours (28 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 77 1d 24 05 Error: UNC at LBA = 0x05241d77 = 86252919
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 08 70 1d 24 45 00 00:18:15.600 READ FPDMA QUEUED
- ea 00 00 00 00 00 a0 00 00:18:15.599 FLUSH CACHE EXT
- 60 00 08 30 3f 52 40 00 00:18:15.576 READ FPDMA QUEUED
- 27 00 00 00 00 00 e0 00 00:18:15.548 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 a0 00 00:18:15.546 IDENTIFY DEVICE
- Error 4 occurred at disk power-on lifetime: 685 hours (28 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 77 1d 24 05 Error: UNC at LBA = 0x05241d77 = 86252919
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 08 ff ff ff 4f 00 00:18:09.508 READ FPDMA QUEUED
- 60 00 08 70 1d 24 45 00 00:18:09.508 READ FPDMA QUEUED
- 60 00 08 30 3f 52 40 00 00:18:09.507 READ FPDMA QUEUED
- 61 00 08 ff ff ff 4f 00 00:18:09.506 WRITE FPDMA QUEUED
- 61 00 08 ff ff ff 4f 00 00:18:09.506 WRITE FPDMA QUEUED
- Error 3 occurred at disk power-on lifetime: 685 hours (28 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 6f 1d 24 05 Error: UNC at LBA = 0x05241d6f = 86252911
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 00 e0 1d 24 45 00 00:17:55.194 READ FPDMA QUEUED
- 60 00 00 e0 1c 24 45 00 00:17:54.579 READ FPDMA QUEUED
- 60 00 00 e0 1a 24 45 00 00:17:52.774 READ FPDMA QUEUED
- 60 00 08 60 bc 45 40 00 00:17:52.773 READ FPDMA QUEUED
- 60 00 60 00 c7 44 40 00 00:17:52.772 READ FPDMA QUEUED
- Error 2 occurred at disk power-on lifetime: 678 hours (28 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 83 b5 04 00 Error: UNC at LBA = 0x0004b583 = 308611
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 08 80 b5 04 40 00 00:00:39.027 READ FPDMA QUEUED
- 60 00 08 18 b5 04 40 00 00:00:38.913 READ FPDMA QUEUED
- 60 00 08 c0 b4 04 40 00 00:00:38.644 READ FPDMA QUEUED
- 60 00 08 b8 b4 04 40 00 00:00:38.411 READ FPDMA QUEUED
- 60 00 08 b0 b4 04 40 00 00:00:38.188 READ FPDMA QUEUED
- Error 1 occurred at disk power-on lifetime: 678 hours (28 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 83 b5 04 00 Error: UNC at LBA = 0x0004b583 = 308611
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 08 00 b4 04 40 00 00:00:20.937 READ FPDMA QUEUED
- 60 00 08 ff ff ff 4f 00 00:00:20.937 READ FPDMA QUEUED
- 60 00 08 ff ff ff 4f 00 00:00:20.923 READ FPDMA QUEUED
- 61 00 30 ff ff ff 4f 00 00:00:20.644 WRITE FPDMA QUEUED
- 60 00 08 ff ff ff 4f 00 00:00:20.499 READ FPDMA QUEUED
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement