Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
- 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
- The NetBSD Foundation, Inc. All rights reserved.
- Copyright (c) 1982, 1986, 1989, 1991, 1993
- The Regents of the University of California. All rights reserved.
- NetBSD 7.99.31 (ME) #1: Mon Jun 20 00:47:00 BST 2016
- xxx@xxx:/src/sys/arch/macppc/compile/obj/ME
- total memory = 1280 MB
- oea_startup: failed to allocate DEAD ZONE: error=12
- avail memory = 1223 MB
- timecounter: Timecounters tick every 10.000 msec
- Kernelized RAIDframe activated
- found openpic PIC at 80040000
- OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources.
- bootpath: /pci@f4000000/ata-6@D/@1:0/netbsd.gz
- mainbus0 (root)
- cpu0 at mainbus0: 7447A (Revision 1.1), ID 0 (primary)
- cpu0: HID0 0x84d0c1bc<EMCP,EICE,DOZE,NAP,DPM,ICE,DCE,IFEM,SGE,BTIC,FBIOB,ABE,BHT>, powersave: 1
- cpu0: 1337.46 MHz, 512KB L2 cache no parity parity enabled
- memory0 at mainbus0: len=256
- spdmem0 at memory0
- spdmem0: DDR SDRAM, no parity or ECC, 1GB, 333MHz (PC-2700)
- spdmem0: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 6.0ns cycle time
- spdmem0: tAA-tRCD-tRP-tRAS: 1-3-3-7
- spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
- uni_n0 at mainbus0 address 0xf8000000
- hw-clock at uni_n0 not configured
- ki2c0 at uni_n0 address 0xf8001000
- iic1 at ki2c0: I2C bus
- dbcool0 at ki2c0
- dbcool0: ADT7463 dBCool(tm) Controller (rev 0x06, stepping 0x02)
- cereal at ki2c0 address 0x1c0 not configured
- uninorth0 at mainbus0
- pci0 at uninorth0 bus 0
- pci0: i/o space, memory space enabled
- pchb0 at pci0 dev 11 function 0
- pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00)
- genfb0 at pci0 dev 16 function 0found EDID property...
- : NVIDIA product 0329 (rev. 0xa1)
- genfb0: framebuffer at 0xa0008000, size 1024x768, depth 8, stride 1024
- wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
- wsmux1: connecting to wsdisplay0
- drm at genfb0 not configured
- uninorth1 at mainbus0
- pci1 at uninorth1 bus 0
- pci1: i/o space, memory space enabled
- pchb1 at pci1 dev 11 function 0
- pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
- bwi0 at pci1 dev 18 function 0: Broadcom Wireless
- bwi0: interrupting at irq 52
- bwi0: BBP id 0x4306, BBP rev 0x3, BBP pkg 0
- bwi0: MAC: rev 5
- bwi0: PHY type 2, rev 2, ver 2
- bwi0: RF manu 0x17f, type 0x2050, rev 2
- bwi0: invalid antenna gain in sprom
- bwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
- bwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
- obio0 at pci1 dev 23 function 0: addr 0x80000000
- zsc0 at obio0 irq 22,23
- zstty0 at zsc0 channel 0
- zstty1 at zsc0 channel 1
- snapper0 at obio0 offset 0x10000: irq 30,1,2
- pmu0 at obio0 offset 0x16000 irq 47: rev. 12
- pmu0: initializing IIC bus
- pmu0: initializing RTC
- pmu0: initializing ADB
- nadb0 at pmu0: Apple Desktop Bus
- pmu0: power-mgt not configured
- smartbat0 at pmu0 addr 0: smart battery
- flags: 5 AC present
- ki2c1 at obio0
- iic2 at ki2c1: I2C bus
- cereal at ki2c1 address 0x1c0 not configured
- deq0 at ki2c1 Apple Digital Equalizer, addr 0x6a
- wdc0 at obio0 offset 0x20000 irq 24, level triggered: DMA transfer
- atabus0 at wdc0 channel 0
- snapper0: codec: TAS3004
- audio0 at snapper0: full duplex, playback, capture
- ohci0 at pci1 dev 24 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
- ohci0: memory access is disabled
- ohci1 at pci1 dev 25 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
- ohci1: memory access is disabled
- ohci2 at pci1 dev 26 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
- ohci2: interrupting at irq 29
- ohci2: OHCI version 1.0, legacy support
- usb0 at ohci2: USB revision 1.0
- ohci3 at pci1 dev 27 function 0: NEC USB Host Controller (rev. 0x43)
- ohci3: interrupting at irq 63
- ohci3: OHCI version 1.0
- usb1 at ohci3: USB revision 1.0
- ohci4 at pci1 dev 27 function 1: NEC USB Host Controller (rev. 0x43)
- ohci4: interrupting at irq 63
- ohci4: OHCI version 1.0
- usb2 at ohci4: USB revision 1.0
- ehci0 at pci1 dev 27 function 2: NEC USB2 Host Controller (rev. 0x04)
- ehci0: interrupting at irq 63
- ehci0: EHCI version 1.0
- ehci0: companion controllers, 3 ports each: ohci3 ohci4
- usb3 at ehci0: USB revision 2.0
- uninorth2 at mainbus0
- pci2 at uninorth2 bus 0
- pci2: i/o space, memory space enabled
- pchb2 at pci2 dev 11 function 0
- pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
- wdc1 at pci2 dev 13 function 0: interrupting at irq 39
- atabus1 at wdc1 channel 0
- fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x81)
- fwohci0: interrupting at irq 40
- fwohci0: OHCI version 1.10 (ROM=0)
- fwohci0: No. of Isochronous channels is 8.
- fwohci0: EUI64 00:0d:93:ff:fe:
- fwohci0: Phy 1394a available S400, 1 ports.
- fwohci0: Link S400, max_rec 2048 bytes.
- ieee1394if0 at fwohci0: IEEE1394 bus
- fwip0 at ieee1394if0: IP over IEEE1394
- fwohci0: Initiate bus reset
- gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x80)
- gem0: interrupting at irq 41
- bmtphy0 at gem0 phy 0: BCM5221 10/100 media interface, rev. 4
- bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
- gem0: Ethernet address 00:0d:93:, 10KB RX fifo, 4KB TX fifo
- vmmask 737c0000 schedmask 7ffc0000 highmask 7ffc0000
- timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
- timecounter: Timecounter "mftb" frequency 18432000 Hz quality 100
- fwohci0: BUS reset
- fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
- ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
- ieee1394if0: bus manager 0
- atapibus0 at atabus0: 2 targets
- uhub0 at usb0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
- uhub0: 2 ports with 2 removable, self powered
- uhub1 at usb1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
- uhub1: 3 ports with 3 removable, self powered
- uhub2 at usb2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
- uhub2: 2 ports with 2 removable, self powered
- uhub3 at usb3: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
- uhub3: 5 ports with 5 removable, self powered
- cd0 at atapibus0 drive 0: <MATSHITADVD-R UJ-825, , DAM5> cdrom removable
- cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
- cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
- wd0 at atabus1 drive 1
- wd0: <TS64GPSD330>
- wd0: drive supports 1-sector PIO transfers, LBA48 addressing
- wd0: 61057 MB, 132322 cyl, 15 head, 63 sec, 512 bytes/sect x 125044736 sectors
- wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
- wd0(wdc1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
- adbkbd0 at nadb0 addr 2: iBook keyboard
- wskbd0 at adbkbd0 mux 1
- wskbd0: connecting to wsdisplay0
- wsmouse0 at adbkbd0 mux 0
- adbms0 at nadb0 addr 3: EMP trackpad <tpad> 4-button, 400 dpi
- wsmouse1 at adbms0 mux 0
- adbbt0 at nadb0 addr 7: button device
- AC Power: AC adapter online.
- uhidev0 at uhub0 port 1 configuration 1 interface 0
- uhidev0: Apple Computer Bluetooth HCI (HID-proxy mode), rev 1.10/12.41, addr 2, iclass 3/1
- ukbd0 at uhidev0
- wskbd1 at ukbd0: console keyboard, using wsdisplay0
- uhidev1 at uhub0 port 1 configuration 1 interface 1
- uhidev1: Apple Computer Bluetooth HCI (HID-proxy mode), rev 1.10/12.41, addr 2, iclass 3/1
- ums0 at uhidev1: 5 buttons
- wsmouse2 at ums0 mux 0
- swwdog0: software watchdog initialized
- boot device: wd0
- root on wd0a dumps on wd0b
- root file system type: ffs
- kern.module.path=/stand/macppc/7.99.31/modules
- wsdisplay0: screen 1 added (default, vt100 emulation)
- wsdisplay0: screen 2 added (default, vt100 emulation)
- wsdisplay0: screen 3 added (default, vt100 emulation)
- wsdisplay0: screen 4 added (default, vt100 emulation)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement