API tools faq
paste
Guest User

Last Kmsg - WiFi Reboot

a guest
Oct 31st, 2013
145
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 183.73 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.0.31-cyanogenmod+ (build02@cyanogenmod) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Mon Oct 28 17:39:56 PDT 2013
  4. [ 0.000000] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
  6. [ 0.000000] Machine: QCT MSM8X60 FUSION FFA
  7. [ 0.000000] memory pool 0 (start 38000000 size 600000) initialized
  8. [ 0.000000] memory pool 1 (start 38600000 size 3802000) initialized
  9. [ 0.000000] memory pool 3 (start 77300000 size 8d00000) initialized
  10. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  11. [ 0.000000] socinfo_init: v6, id=71, ver=2.0, raw_id=1329, raw_ver=1329, hw_plat=0, hw_plat_ver=65537
  12. [ 0.000000] accessory_chip=58 hw_plat_subtype=0
  13. [ 0.000000] allocating 32043008 bytes at c7e00000 (48000000 physical) for fb
  14. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c9c92000 s8960 r8192 d15616 u32768
  15. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 202500
  16. [ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=iprj no_console_suspend=1 uart_console=disable lge.rev=rev_12 lge.hreset=off lge.reboot=pwroff lge.lcd=on lge.batt_info=ds2704 lge.pwron=keypad lge.reset=sub_rst_mode lge.usb_cable=normal androidboot.emmc=true androidboot.serialno=c5bb62a androidboot.baseband=svlte2a
  17. [ 0.000000] BOARD : LGE rev_12
  18. [ 0.000000] BOARD : LGE target 3
  19. [ 0.000000] Battery : ds2704 0
  20. [ 0.000000] usb_cable_info : normal (8)
  21. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  22. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  23. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  24. [ 0.000000] Memory: 44MB 755MB = 799MB total
  25. [ 0.000000] Memory: 755760k/755760k available, 206800k reserved, 463872K highmem
  26. [ 0.000000] Virtual kernel memory layout:
  27. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  28. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  29. [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  30. [ 0.000000] vmalloc : 0xdb000000 - 0xfa000000 ( 496 MB)
  31. [ 0.000000] lowmem : 0xc0000000 - 0xdac00000 ( 428 MB)
  32. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  33. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  34. [ 0.000000] .init : 0xc0008000 - 0xc005a000 ( 328 kB)
  35. [ 0.000000] .text : 0xc0100000 - 0xc0c7bfe4 (11760 kB)
  36. [ 0.000000] .data : 0xc0d00000 - 0xc0db9df8 ( 744 kB)
  37. [ 0.000000] .bss : 0xc0db9e1c - 0xc1391794 (5983 kB)
  38. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  39. [ 0.000000] Preemptible hierarchical RCU implementation.
  40. [ 0.000000] NR_IRQS:855
  41. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  42. [ 0.000000] Console: colour dummy device 80x30
  43. [ 0.150177] Calibrating delay using timer specific routine.. 13.52 BogoMIPS (lpj=67642)
  44. [ 0.150207] pid_max: default: 32768 minimum: 301
  45. [ 0.150543] Security Framework initialized
  46. [ 0.150573] SELinux: Initializing.
  47. [ 0.150817] Mount-cache hash table entries: 512
  48. [ 0.152038] Initializing cgroup subsys debug
  49. [ 0.152069] Initializing cgroup subsys cpuacct
  50. [ 0.152160] Initializing cgroup subsys freezer
  51. [ 0.152221] CPU: Testing write buffer coherency: ok
  52. [ 0.152587] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
  53. [ 0.254058] [BOOT_CAUSE] 1
  54. [ 0.264099] Brought up 2 CPUs
  55. [ 0.264099] SMP: Total of 2 processors activated (27.05 BogoMIPS).
  56. [ 0.276672] print_constraints: dummy:
  57. [ 0.276763] rdev_init_debugfs: Error-Bad Function Input
  58. [ 0.277038] NET: Registered protocol family 16
  59. [ 0.277221] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  60. [ 0.278717] msm_rpm_init: RPM firmware 2.0.93
  61. [ 0.279144] LGE: lge_add_misc_devices
  62. [ 0.279571] saw_probe: id=0, name=8901_s0
  63. [ 0.279907] saw_probe: id=1, name=8901_s1
  64. [ 0.281311] rcg_clk_handoff: gsbi12_uart_clk rate=3686400
  65. [ 0.281341] rcg_clk_handoff: gsbi3_qup_clk rate=24000000
  66. [ 0.281372] rcg_clk_handoff: gsbi5_qup_clk rate=24000000
  67. [ 0.281402] rcg_clk_handoff: sdc1_clk rate=48000000
  68. [ 0.281463] rcg_clk_handoff: dsi_byte_clk rate=1
  69. [ 0.281524] rcg_clk_handoff: mdp_clk rate=200000000
  70. [ 0.281646] rcg_clk_handoff: pixel_mdp_clk rate=53990000
  71. [ 0.283142] ACPU PVS: Slow
  72. [ 0.283172] Max ACPU freq: 1512000 KHz
  73. [ 0.288513] CPU0: 23 scaling frequencies supported.
  74. [ 0.288513] CPU1: 23 scaling frequencies supported.
  75. [ 0.494354] [LG_BTUI] BTINIT------------->msm8x60_init:
  76. [ 0.494354] lge_add_btpower_devices, line: 334
  77. [ 0.494354] [LG_BTUI] bt_power_init : Called BT Poweer Init
  78. [ 0.494445] sensor_power_init, line: 192
  79. [ 0.495605] pm8058_probe: PMIC revision: E3
  80. [ 0.496673] pm_gpio_probe: OK: base=173, ngpio=40
  81. [ 0.496826] pm8xxx_mpp_probe: OK: base=213, ngpio=12
  82. [ 0.497833] pm8901_probe: PMIC revision reg: F4
  83. [ 0.497863] pm8901_probe: PMIC version: PM8901 rev 2.1
  84. [ 0.498168] pm8xxx_mpp_probe: OK: base=225, ngpio=4
  85. [ 0.508605] RAM CONSOLE START ADDR : 0x77300000
  86. [ 0.508605] RAM CONSOLE END ADDR : 0x7733ffff
  87. [ 0.508666] ram_console: got buffer at 77300000, size 40000
  88. [ 0.508758] ram_console: found existing buffer, size 229348, start 38161
  89. [ 1.332214] console [ram-1] enabled
  90. [ 1.332305] CRASH LOG START ADDR : 0x77340000
  91. [ 1.332458] CRASH LOG END ADDR : 0x77340fff
  92. [ 1.353118] bio: create slab <bio-0> at 0
  93. [ 1.353912] ION heap vmalloc created
  94. [ 1.354125] ION heap mm created at 38800000 with size 3600000
  95. [ 1.354217] ION heap mm_fw created at 38600000 with size 200000
  96. [ 1.354400] ION heap mfc created at 3be00000 with size 2000
  97. [ 1.354522] ION heap sf created at 77341000 with size 4000000
  98. [ 1.354705] ION heap camera_preview created at 7b341000 with size 2000000
  99. [ 1.354797] ION heap wb created at 7d341000 with size 2100000
  100. [ 1.354980] ION heap qsecom created at 7f441000 with size 600000
  101. [ 1.355102] ION heap audio created at 7fa41000 with size 28b000
  102. [ 1.355377] pmic8058_pwm_probe: OK
  103. [ 1.355926] SCSI subsystem initialized
  104. [ 1.356201] usbcore: registered new interface driver usbfs
  105. [ 1.356384] usbcore: registered new interface driver hub
  106. [ 1.356567] usbcore: registered new device driver usb
  107. [ 1.356933] Advanced Linux Sound Architecture Driver Version 1.0.24.
  108. [ 1.357391] Bluetooth: Core ver 2.16
  109. [ 1.357574] NET: Registered protocol family 31
  110. [ 1.357666] Bluetooth: HCI device and connection manager initialized
  111. [ 1.357818] Bluetooth: HCI socket layer initialized
  112. [ 1.357910] Bluetooth: L2CAP socket layer initialized
  113. [ 1.358123] Bluetooth: SCO socket layer initialized
  114. [ 1.358673] cfg80211: Calling CRDA to update world regulatory domain
  115. [ 1.358917] Switching to clocksource gp_timer
  116. [ 1.374450] NET: Registered protocol family 2
  117. [ 1.374633] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  118. [ 1.375091] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  119. [ 1.375762] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  120. [ 1.376464] TCP: Hash tables configured (established 65536 bind 65536)
  121. [ 1.376617] TCP reno registered
  122. [ 1.376708] UDP hash table entries: 256 (order: 1, 8192 bytes)
  123. [ 1.376831] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  124. [ 1.377380] NET: Registered protocol family 1
  125. [ 1.377807] RPC: Registered named UNIX socket transport module.
  126. [ 1.377960] RPC: Registered udp transport module.
  127. [ 1.378051] RPC: Registered tcp transport module.
  128. [ 1.378204] RPC: Registered tcp NFSv4.1 backchannel transport module.
  129. [ 1.378509] Trying to unpack rootfs image as initramfs...
  130. [ 1.472778] Freeing initrd memory: 3020K
  131. [ 1.473114] PMU: registered new PMU device of type 0
  132. [ 1.473419] PMU: registered new PMU device of type 1
  133. [ 1.473876] ETM/ETB intialized.
  134. [ 1.474090] pil_qdsp6v3 pil_qdsp6v3: using secure boot
  135. [ 1.474548] pil_modem pil_modem: using secure boot
  136. [ 1.474731] sdio_al:SDIO-AL SW version 1.30
  137. [ 1.476959] smd_channel_probe_worker: allocation table not initialized
  138. [ 1.484588] lpa_if_init: lpa_if_ptr 0xda7d9400 buf_vir 0xffdf0000 buf_phy 0x5ab70000 buf_zise 65536
  139. [ 1.486785] charm_modem_probe: Registering charm modem
  140. [ 1.489013] msm_rpm_log_probe: OK
  141. [ 1.489288] [sdio_debug_init] ++
  142. [ 1.489501] [sdio_debug_init] successfully registered SDIO device
  143. [ 1.489654] [sdio_debug_init] --
  144. [ 1.490051] msm_camera_vreg_enable:
  145. [ 1.549285] msm_camera_vreg_disable:
  146. [ 1.550354] msm_camera_vreg_enable:
  147. [ 1.551025] msm_camera_vreg_disable:
  148. [ 1.551940] Registered led device: spotlight
  149. [ 1.552093] sensor_common_power_set pwr_mask(0), on(1), sensor(1)
  150. [ 1.557861] k3dh_acc_misc Device detected!
  151. [ 1.558441] k3dh_acc_misc I2C driver registered!
  152. [ 1.559753] input: accelerometer as /devices/virtual/input/input0
  153. [ 1.560241] sensor_common_power_set pwr_mask(1), on(0), sensor(1)
  154. [ 1.560760] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  155. [ 1.562652] input: gyroscope as /devices/virtual/input/input1
  156. [ 1.562835] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  157. [ 1.563385] sensor_common_power_set pwr_mask(0), on(1), sensor(2)
  158. [ 1.565612] ami306 9-000e: force operating mode
  159. [ 1.565704] Register input device!
  160. [ 1.565979] input: magnetic_field as /devices/virtual/input/input2
  161. [ 1.566467] apds9900 9-0039: enable = 0
  162. [ 1.566619] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  163. [ 1.587371] apds9900 9-0039: support ver. 1.0.4 enabled
  164. [ 1.587768] input: proximity as /devices/virtual/input/input3
  165. [ 1.587951] input: light as /devices/virtual/input/input4
  166. [ 1.999816] input: touch_dev as /devices/virtual/input/input5
  167. [ 2.004577] ### undock detect
  168. [ 2.004669] hall_ic_dock_probe: curr:0,
  169. [ 2.004821] hall_ic_dock: hall_ic_dock_probe: Done
  170. [ 2.005004] wm9093_amp_ctl_probe()
  171. [ 2.005096] wm9093 chip found
  172. [ 2.005676] AMP INIT OK
  173. [ 2.109558] qfuse_status_init
  174. [ 2.110168] diagcmd_probe:lg_fw_diagcmd
  175. [ 2.110778] input: ats_input as /devices/virtual/input/input6
  176. [ 2.110992] lge_emmc_direct_access_init: finished
  177. [ 2.111206] lge_tempdevice_init
  178. [ 2.111877] input: atcmd_virtual_kbd as /devices/platform/atcmd_virtual_kbd/input/input7
  179. [ 2.112396] lge_panic_handler: got buffer at 77340000, size 1000
  180. [ 2.112731] audit: initializing netlink socket (disabled)
  181. [ 2.112854] type=2000 audit(2.000:1): initialized
  182. [ 2.225433] highmem bounce pool size: 64 pages
  183. [ 2.225738] ashmem: initialized
  184. [ 2.230102] Hook version: 3.0.17 2012/01/13
  185. [ 2.232788] fuse init (API version 7.16)
  186. [ 2.233093] msgmni has been set to 575
  187. [ 2.233215] SELinux: Registering netfilter hooks
  188. [ 2.235290] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  189. [ 2.235473] io scheduler noop registered
  190. [ 2.235565] io scheduler deadline registered (default)
  191. [ 2.235687] io scheduler cfq registered
  192. [ 2.236907] mdp_bus_scale_update_request invalid bus handle
  193. [ 2.238250] mdp4_csc_config: Block type 10 isn't supported by CSC.
  194. [ 2.238433] mdp4_csc_config: Block type 8 isn't supported by CSC.
  195. [ 2.242187] mipi_dsi base phy_addr = 0x4700000 virt = 0xdb600000
  196. [ 2.242370] mmss_sfpb base phy_addr = 0x5700000,virt = 0xdb046000
  197. [ 2.242462] mipi_dsi_fifo_status: Error: status=44441000
  198. [ 2.242736] mdp4_csc_config: Block type 10 isn't supported by CSC.
  199. [ 2.242828] mdp4_csc_config: Block type 8 isn't supported by CSC.
  200. [ 2.243133] lm3530_probe: i2c probe start
  201. [ 2.243774] mipi_lgit_lcd_probe: mipi lgit lcd probe start
  202. [ 2.243927] setting pdata->panel_info.fb_num to 3. type: 8
  203. [ 2.244384] mdp4_dsi_vsync_init: ndx=0
  204. [ 2.251007] FrameBuffer[0] 720x1280 size=11304960 bytes is registered successfully!
  205. [ 2.395507] mdp4_csc_config: Block type 10 isn't supported by CSC.
  206. [ 2.395690] mdp4_csc_config: Block type 8 isn't supported by CSC.
  207. [ 2.401580] entering mipi_lgit_lcd_on ..
  208. [ 2.529632] exting mipi_lgit_lcd_on ..
  209. [ 2.653381] Registered led device: lcd-backlight
  210. [ 2.654571] setting pdata->panel_info.fb_num to 2. type: 7
  211. [ 2.655151] mdp4_dtv_vsync_init: ndx=0
  212. [ 2.666442] FrameBuffer[1] 1920x1080 size=16588800 bytes is registered successfully!
  213. [ 2.666931] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group c17af808
  214. [ 2.667114] hdmi_msm hdmi_msm.1: HDMI HPD: ON
  215. [ 2.667205] hdmi_core_power(on): success
  216. [ 2.770935]
  217. [ 2.770935] msm_vidc_enc: Inside vid_enc_init()
  218. [ 2.771301]
  219. [ 2.771301] msm_vidc_enc: Inside vid_enc_vcd_init()
  220. [ 2.843627] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  221. [ 2.929840] msm_serial_hs module loaded
  222. [ 2.930023] msm_serial_hsl: detected port #1
  223. [ 2.930267] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM
  224. [ 3.089752] msm_serial_hsl: detected port #0
  225. [ 3.089996] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
  226. [ 3.090118] msm_serial_hsl: console setup on port #0
  227. [ 4.322418] console [ttyHSL0] enabled
  228. [ 4.429962] msm_serial_hsl: driver initialized
  229. [ 4.434722] msm_rotator_probe: rotator_hw_revision=1
  230. [ 4.438751] msm_rotator_probe: rotator_hw_revision=1
  231. [ 4.451019] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  232. [ 4.459014] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  233. [ 4.466705] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  234. [ 4.478149] brd: module loaded
  235. [ 4.482421] loop: module loaded
  236. [ 4.484802] pmem: Initializing pmem_audio (user-space) as non-cached
  237. [ 4.491424] allocating 2666496 bytes at (null) (7fccc000 physical) for pmem_audio
  238. [ 4.498809] i2c-core: driver [isa1200] using legacy suspend method
  239. [ 4.504852] i2c-core: driver [isa1200] using legacy resume method
  240. [ 4.511871] TZCOM: unable to get bus clk
  241. [ 4.515350] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22
  242. [ 4.527923] adie_codec_register_codec_operations: codec type 1
  243. [ 4.534027] SCSI Media Changer driver v0.25
  244. [ 4.537384] PPP generic driver version 2.4.2
  245. [ 4.541900] PPP Deflate Compression module registered
  246. [ 4.546630] PPP BSD Compression module registered
  247. [ 4.552001] PPP MPPE Compression module registered
  248. [ 4.556152] NET: Registered protocol family 24
  249. [ 4.560546] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  250. [ 4.570251] CSLIP: code copyright 1989 Regents of the University of California.
  251. [ 4.577850] tun: Universal TUN/TAP device driver, 1.6
  252. [ 4.582489] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  253. [ 4.589569] brcm_static_buf_init: initialize wifi_alloc_data
  254. [ 4.594329] Section [3] initial allocation success size[139264]!!!
  255. [ 4.600524] Section [2] initial allocation success size[32768]!!!
  256. [ 4.606506] Section [1] initial allocation success size[12288]!!!
  257. [ 4.612670] Section [0] initial allocation success size[12288]!!!
  258. [ 4.618713] rmnet_init: SMD devices[8]
  259. [ 4.625640] rmnet_init: SDIO devices[8]
  260. [ 4.633270] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  261. [ 4.639099] host driver registered w/ tranceiver
  262. [ 4.643615] usbcore: registered new interface driver cdc_acm
  263. [ 4.649139] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  264. [ 4.657073] Initializing USB Mass Storage driver...
  265. [ 4.662048] usbcore: registered new interface driver usb-storage
  266. [ 4.667907] USB Mass Storage support registered.
  267. [ 4.672637] usbcore: registered new interface driver ums-alauda
  268. [ 4.678436] usbcore: registered new interface driver ums-cypress
  269. [ 4.684509] usbcore: registered new interface driver ums-datafab
  270. [ 4.690429] usbcore: registered new interface driver ums-freecom
  271. [ 4.696472] usbcore: registered new interface driver ums-isd200
  272. [ 4.702331] usbcore: registered new interface driver ums-jumpshot
  273. [ 4.708465] usbcore: registered new interface driver ums-karma
  274. [ 4.714233] usbcore: registered new interface driver ums-onetouch
  275. [ 4.720367] usbcore: registered new interface driver ums-sddr09
  276. [ 4.726196] usbcore: registered new interface driver ums-sddr55
  277. [ 4.732177] usbcore: registered new interface driver ums-usbat
  278. [ 4.737915] usbcore: registered new interface driver usb_ehset_test
  279. [ 4.744476] peripheral driver registered w/ tranceiver
  280. [ 4.751556] android_usb gadget: Mass Storage Function, version: 2009/09/11
  281. [ 4.757537] android_usb gadget: Number of LUNs=1
  282. [ 4.762084] lun0: LUN: removable file: (no medium)
  283. [ 4.767333] android_usb gadget: android_usb ready
  284. [ 4.771759] atcmd_init: ATCMD Handler /dev/lge_atcmd major=237
  285. [ 4.778991] DIAG registered SDIO device
  286. [ 4.782165] diagchar initialized now
  287. [ 4.785675] LG_FW : diagpkt_tbl_reg: DeviceIOControl failed.
  288. [ 4.791809] mousedev: PS/2 mouse device common for all mice
  289. [ 4.798767] input: i_vzw-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input8
  290. [ 4.808197] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input9
  291. [ 4.818939] using rtc device, pm8xxx_rtc, for alarms
  292. [ 4.822906] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  293. [ 4.830108] i2c /dev entries driver
  294. [ 4.834808] Linux video capture interface: v2.00
  295. [ 4.839599] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
  296. [ 4.846893] max17040 11-0036: MAX17040 Fuel-Gauge Ver 02
  297. [ 4.851287] i2c-core: driver [max17040] using legacy suspend method
  298. [ 4.857543] i2c-core: driver [max17040] using legacy resume method
  299. [ 4.864044] ############ [msm_charger_temp_work] POLL TIME = 5400 #####################
  300. [ 4.872985] bq24160 12-006b: bq24160_probe MPP11 initial value = 1
  301. [ 4.878509] bq24160 12-006b: __set_charger REG_#0 =0x88
  302. [ 4.883819] bq24160 12-006b: __set_charger REG_#2 =0x4c
  303. [ 4.888946] bq24160 12-006b: __set_charger REG_#3 =0xac
  304. [ 4.894226] bq24160 12-006b: __set_charger REG_#5 =0xb
  305. [ 4.899261] bq24160 12-006b: __set_charger REG_#6 =0x40
  306. [ 4.904571] bq24160 12-006b: __set_charger REG_#7 =0xa0
  307. [ 4.909362] bq24160 12-006b: __set_charger Enable charger
  308. [ 4.915740] msm_adc successfully registered
  309. [ 4.929901] tsens_tm_probe: OK
  310. [ 4.969787] pmic8058_xoadc:The offset for AMUX calibrationwas -379
  311. [ 4.970123] msm_otg_suspend: usb in low power mode
  312. [ 4.985229] pm8xxx_tm_probe: OK
  313. [ 4.987701] pm8xxx_tm_probe: OK
  314. [ 4.991180] device-mapper: uevent: version 1.0.3
  315. [ 4.995635] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
  316. [ 5.003814] Bluetooth: HCI UART driver ver 2.2
  317. [ 5.007995] Bluetooth: HCI H4 protocol initialized
  318. [ 5.012847] Bluetooth: HCI_IBS protocol initialized
  319. [ 5.017639] Bluetooth: MSM Sleep Mode Driver Ver 1.1
  320. [ 5.023498] cpuidle: using governor ladder
  321. [ 5.026641] cpuidle: using governor menu
  322. [ 5.031280] mmc0: mci-version: 0
  323. [ 5.033905] mmc0: No card detect facilities available
  324. [ 5.039367] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
  325. [ 5.047149] mmc0: 8 bit data mode enabled
  326. [ 5.051055] mmc0: 4 bit data mode disabled
  327. [ 5.055114] mmc0: polling status mode disabled
  328. [ 5.059631] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  329. [ 5.065216] mmc0: Slot eject status = 0
  330. [ 5.069091] mmc0: Power save feature enable = 1
  331. [ 5.073547] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x59800000
  332. [ 5.080200] mmc0: DM cmd busaddr 0x59800000, cmdptr busaddr 0x59817f40
  333. [ 5.086914] mmc1: mci-version: 0
  334. [ 5.090301] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma 19 dmacrcri 4
  335. [ 5.098114] mmc1: 8 bit data mode enabled
  336. [ 5.102172] mmc1: 4 bit data mode disabled
  337. [ 5.106170] mmc1: polling status mode disabled
  338. [ 5.110626] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  339. [ 5.116302] mmc1: Slot eject status = 0
  340. [ 5.120056] mmc1: Power save feature enable = 1
  341. [ 5.124633] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x59820000
  342. [ 5.131195] mmc1: DM cmd busaddr 0x59820000, cmdptr busaddr 0x59837f40
  343. [ 5.138031] mmc2: mci-version: 0
  344. [ 5.145324] mmc2: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2
  345. [ 5.152923] mmc2: 8 bit data mode disabled
  346. [ 5.156890] mmc2: 4 bit data mode enabled
  347. [ 5.160949] mmc2: polling status mode disabled
  348. [ 5.165313] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  349. [ 5.170959] mmc2: Slot eject status = 0
  350. [ 5.174835] mmc2: Power save feature enable = 1
  351. [ 5.179290] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x59840000
  352. [ 5.185974] mmc2: DM cmd busaddr 0x59840000, cmdptr busaddr 0x59857f40
  353. [ 5.192687] mmc3: mci-version: 0
  354. [ 5.195739] bcm432x_sdcc_wlan_slot_status: 34 0
  355. [ 5.200561] mmc3: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,290 dma 21 dmacrcri 5
  356. [ 5.203186] mmc0: new high speed MMC card at address 0001
  357. [ 5.213958] mmc3: 8 bit data mode disabled
  358. [ 5.213989] mmcblk0: mmc0:0001 HYNIX 3.36 GiB
  359. [ 5.222595] mmc3: 4 bit data mode enabled
  360. [ 5.226074] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 >
  361. [ 5.238830] mmc3: polling status mode disabled
  362. [ 5.243255] mmc3: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  363. [ 5.248809] mmc3: Slot eject status = 1
  364. [ 5.252716] mmc3: Power save feature enable = 1
  365. [ 5.257171] mmc3: DM non-cached buffer at ffd40000, dma_addr 0x59860000
  366. [ 5.263824] mmc3: DM cmd busaddr 0x59860000, cmdptr busaddr 0x59877f40
  367. [ 5.270568] mmc4: mci-version: 0
  368. [ 5.273864] mmc4: Qualcomm MSM SDCC-core at 0x0000000012200000 irq 220,0 dma 21 dmacrcri 14
  369. [ 5.281921] mmc4: 8 bit data mode disabled
  370. [ 5.285949] mmc4: 4 bit data mode enabled
  371. [ 5.289886] mmc4: polling status mode disabled
  372. [ 5.294311] mmc4: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  373. [ 5.300048] mmc4: Slot eject status = 0
  374. [ 5.303771] mmc4: Power save feature enable = 1
  375. [ 5.308349] mmc4: DM non-cached buffer at ffd20000, dma_addr 0x598a0000
  376. [ 5.314880] mmc4: DM cmd busaddr 0x598a0000, cmdptr busaddr 0x598b7f40
  377. [ 5.321929] Registered led device: button-backlight
  378. [ 5.327056] usbcore: registered new interface driver usbhid
  379. [ 5.331909] usbhid: USB HID core driver
  380. [ 5.336273] logger: created 256K log 'log_main'
  381. [ 5.340393] logger: created 256K log 'log_events'
  382. [ 5.345062] logger: created 256K log 'log_radio'
  383. [ 5.349578] logger: created 256K log 'log_system'
  384. [ 5.355712] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
  385. [ 5.362487] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  386. [ 5.370666] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
  387. [ 5.378479] mvs-cpu-dai mvs-cpu-dai.0: asoc_mvs_cpu_probe: dev name mvs-cpu-dai.0
  388. [ 5.385650] mvs-codec-dai mvs-codec-dai.0: asoc_mvs_codec_probe: dev name mvs-codec-dai.0
  389. [ 5.393829] msm-mvs-audio msm-mvs-audio.0: msm_pcm_probe: dev name msm-mvs-audio.0
  390. [ 5.401947] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
  391. [ 5.406951] asoc: mvs-codec-dai <-> mvs-cpu-dai.0 mapping ok
  392. [ 5.414245] ALSA device list:
  393. [ 5.416259] #0: msm-audio
  394. [ 5.419128] Mirror/redirect action on
  395. [ 5.422790] u32 classifier
  396. [ 5.425384] Actions configured
  397. [ 5.428771] Netfilter messages via NETLINK v0.30.
  398. [ 5.433502] nf_conntrack version 0.5.0 (11855 buckets, 47420 max)
  399. [ 5.440032] ctnetlink v0.93: registering with nfnetlink.
  400. [ 5.444946] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  401. [ 5.451782] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  402. [ 5.458282] xt_time: kernel timezone is -0000
  403. [ 5.462158] ip_tables: (C) 2000-2006 Netfilter Core Team
  404. [ 5.467407] arp_tables: (C) 2002 David S. Miller
  405. [ 5.471984] TCP cubic registered
  406. [ 5.475036] Initializing XFRM netlink socket
  407. [ 5.479980] NET: Registered protocol family 10
  408. [ 5.485351] Mobile IPv6
  409. [ 5.486877] ip6_tables: (C) 2000-2006 Netfilter Core Team
  410. [ 5.487060] mmc2: host does not support reading read-only switch. assuming write-enable.
  411. [ 5.490844] mmc2: new high speed SDHC card at address e624
  412. [ 5.505920] mmcblk1: mmc2:e624 SU16G 14.8 GiB
  413. [ 5.506042] IPv6 over IPv4 tunneling driver
  414. [ 5.506896] NET: Registered protocol family 17
  415. [ 5.506958] NET: Registered protocol family 15
  416. [ 5.523406] Bluetooth: RFCOMM TTY layer initialized
  417. [ 5.528259] Bluetooth: RFCOMM socket layer initialized
  418. [ 5.532623] mmcblk1: p1
  419. [ 5.535736] Bluetooth: RFCOMM ver 1.11
  420. [ 5.539520] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  421. [ 5.544769] Bluetooth: BNEP filters: protocol multicast
  422. [ 5.550048] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  423. [ 5.555969] L2TP core driver, V2.0
  424. [ 5.559326] PPPoL2TP kernel driver, V2.0
  425. [ 5.563171] Registering the dns_resolver key type
  426. [ 5.567871] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
  427. [ 5.575561] Registering SWP/SWPB emulation handler
  428. [ 5.588836] clock_late_init() disabled 168 unused clocks
  429. [ 5.598602] MSM Watchdog Initialized
  430. [ 5.602203] set_dload_mode : 1
  431. [ 5.604309] set_dload_mode : 0
  432. [ 5.607849] sii9244_probe: add i2c driver : sii9244_i2c_page0
  433. [ 5.615173] sii9244_probe: add i2c driver : sii9244_i2c_page1
  434. [ 5.622131] sii9244_probe: add i2c driver : sii9244_i2c_page2
  435. [ 5.626983] sii9244_probe: add i2c driver : sii9244_i2c_page3
  436. [ 5.633392] sii9244_workfunc_main called : mhl_workreq = 4
  437. [ 5.638153] mhl_power_config
  438. [ 5.641052] sii9244_cfg_power: mhl_data.initialized = 0
  439. [ 5.646362] input: mhl_virtual_kbmouse as /devices/virtual/input/input10
  440. [ 5.653442] mhl_virtual_kbmouse_register: register success for input device
  441. [ 5.660644] dhd_module_init: Enter
  442. [ 5.663208] wl_android_init
  443. [ 5.666076]
  444. [ 5.666076] Dongle Host Driver, version 1.15.3
  445. [ 5.671936] =========== WLAN going back to live ========
  446. [ 5.680847] bcm432x_sdcc_wlan_slot_status: 34 1
  447. [ 5.684417] mmc3: Slot status change detected (0 -> 1)
  448. [ 5.808959] mmc3: new high speed SDIO card at address 0001
  449. [ 5.815643] dhd_customer_oob_irq_map: customer specific Host GPIO number is (45)
  450. [ 5.823455] mem_prealloc: section [3] size[139264]
  451. [ 5.827270] mem_prealloc: This data is using!!!
  452. [ 5.831939] alloc static buf at d9cc0000!
  453. [ 5.835784] mem_prealloc: section [4] size[0]
  454. [ 5.844360] DHD: dongle ram size is set to 294912(orig 294912)
  455. [ 5.849365] dhd_attach: Enter
  456. [ 5.852233] dhd_add_if: idx 0, handle->d9d1e000
  457. [ 5.856689] mem_prealloc: section [0] size[10312]
  458. [ 5.861480] mem_prealloc: This data is using!!!
  459. [ 5.867065] p2p0: P2P Interface Registered
  460. [ 5.879913] Initialize DPC thread
  461. [ 5.882904] dhd_dpc_thread: Enter Set CPU Affinity only to cpu0
  462. [ 5.885925] ------------[ cut here ]------------
  463. [ 5.885955] WARNING: at /opt/jenkins/android/workspace/android/jellybean/kernel/lge/iproj/kernel/irq/manage.c:421 enable_irq+0x50/0x6c()
  464. [ 5.885986] Unbalanced enable for IRQ 290
  465. [ 5.885986] Modules linked in:
  466. [ 5.886016] [<c010cf9c>] (unwind_backtrace+0x0/0x12c) from [<c01bfa38>] (warn_slowpath_common+0x4c/0x64)
  467. [ 5.886047] [<c01bfa38>] (warn_slowpath_common+0x4c/0x64) from [<c01bfad0>] (warn_slowpath_fmt+0x2c/0x3c)
  468. [ 5.886047] [<c01bfad0>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0213530>] (enable_irq+0x50/0x6c)
  469. [ 5.886077] [<c0213530>] (enable_irq+0x50/0x6c) from [<c0553e04>] (dhd_customer_gpio_wlan_ctrl+0xbc/0xe0)
  470. [ 5.886077] [<c0553e04>] (dhd_customer_gpio_wlan_ctrl+0xbc/0xe0) from [<c002d198>] (dhd_module_init+0xc4/0x164)
  471. [ 5.886108] [<c002d198>] (dhd_module_init+0xc4/0x164) from [<c01004a0>] (do_one_initcall+0x94/0x164)
  472. [ 5.886138] [<c01004a0>] (do_one_initcall+0x94/0x164) from [<c00083ac>] (kernel_init+0x88/0x130)
  473. [ 5.886138] [<c00083ac>] (kernel_init+0x88/0x130) from [<c0106f38>] (kernel_thread_exit+0x0/0x8)
  474. [ 5.886138] ---[ end trace 8fb92908db658885 ]---
  475. [ 5.991607] dhd_dpc_thread: dhd_dpc() set CPU affinity Succeed PID = 115
  476. [ 5.998413] mem_prealloc: section [1] size[10300]
  477. [ 6.002288] mem_prealloc: This data is using!!!
  478. [ 6.006713] mem_prealloc: section [2] size[32768]
  479. [ 6.011413] mem_prealloc: This data is using!!!
  480. [ 6.016143] dhd_net_attach: ifidx 0
  481. [ 6.019927] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
  482. [ 6.027679] release dhd_registration_sem
  483. [ 6.086456] =========== WLAN placed in RESET ========
  484. [ 6.090728] bcm432x_sdcc_wlan_slot_status: 34 0
  485. [ 6.095062] mmc3: Slot status change detected (1 -> 0)
  486. [ 6.500305] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-04-28 01:43:32 UTC (10115012)
  487. [ 6.500732] ############ [msm_charger_temperature_battery_alarm] #####################
  488. [ 6.500885] ############ [msm_charger_temp_work] POLL TIME = 5400 #####################
  489. [ 6.525726] msm-charger no batt gauge assuming 3.5V
  490. [ 6.530303] msm-charger no batt gauge assuming 3.5V
  491. [ 6.534881] msm-charger no batt gauge assuming 3.5V
  492. [ 6.540344] msm-charger no batt gauge assuming 35 deg G
  493. [ 6.545013] msm-charger no batt gauge batt=id_invalid
  494. [ 6.550994] msm-charger no batt gauge and no temp adc
  495. [ 6.555175] msm-charger no batt gauge assuming 3.5V
  496. [ 6.562408] batt_gauge_cal_nv_read
  497. [ 6.564910] msm_rw_fuel error
  498. [ 6.570892] pm8058-charger pm8058-charger: pm8058_chg_determine_initial_state charger absent
  499. [ 6.579498] HSD.fsa8008[lge_hsd_init : 680]lge_hsd_init
  500. [ 6.584808] pm8058_get_battery_temperature_adc: therm_raw is 1028
  501. [ 6.590820] HSD.fsa8008[lge_hsd_probe : 431]lge_hsd_probe
  502. [ 6.596282] HSD.fsa8008[lge_hsd_probe : 516]hi->irq_detect = 639
  503. [ 6.602905] HSD.fsa8008[lge_hsd_probe : 541]hi->irq_key = 640
  504. [ 6.609222] input: 8660_handset as /devices/virtual/input/input11
  505. [ 6.615722] LGE: Android Vibrator Driver Init
  506. [ 6.620452] [LGE:vibrator] GPIO_LIN_MOTOR_EN gpio value :0
  507. [ 6.625244] LGE: Android Vibrator Initialization was done
  508. [ 6.631744] Freeing init memory: 328K
  509. [ 6.642578] SELinux: 512 avtab hash slots, 1924 rules.
  510. [ 6.653259] SELinux: 512 avtab hash slots, 1924 rules.
  511. [ 6.657714] SELinux: 1 users, 2 roles, 343 types, 13 bools, 1 sens, 1024 cats
  512. [ 6.664642] SELinux: 84 classes, 1924 rules
  513. [ 6.670074] SELinux: Completing initialization.
  514. [ 6.673736] SELinux: Setting up existing superblocks.
  515. [ 6.678955] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  516. [ 6.686035] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  517. [ 6.693481] SELinux: initialized (dev bdev, type bdev), not configured for labeling
  518. [ 6.701019] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  519. [ 6.707885] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  520. [ 6.715179] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  521. [ 6.727905] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  522. [ 6.733978] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  523. [ 6.740814] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  524. [ 6.749786] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  525. [ 6.757141] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  526. [ 6.765075] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  527. [ 6.772247] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  528. [ 7.237762] type=1403 audit(10115013.220:2): policy loaded auid=4294967295 ses=4294967295
  529. [ 7.245391] SELinux: Loaded policy from (null)
  530. [ 7.255737] init: could not import file '/init.carrier.rc' from '/init.rc'
  531. [ 7.262268] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  532. [ 7.271484] init: do_chown: Could not access /selinux/booleans
  533. [ 7.280822] init: invalid uid 'fm_radio'
  534. [ 7.374328] batt_gauge_cal_nv_read
  535. [ 7.377197] msm_rw_fuel error
  536. [ 7.386840] pm8058_get_battery_temperature_adc: therm_raw is 1028
  537. [ 7.839447] init: cannot open '/initlogo.rle'
  538. [ 7.976287] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  539. [ 7.987365] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  540. [ 7.994171] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  541. [ 8.001159] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  542. [ 8.008300] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  543. [ 8.132019] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  544. [ 8.144348] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
  545. [ 8.174682] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
  546. [ 8.184448] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr
  547. [ 8.233062] EXT4-fs (mmcblk0p27): recovery complete
  548. [ 8.241180] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
  549. [ 8.249786] SELinux: initialized (dev mmcblk0p27, type ext4), uses xattr
  550. [ 11.893157] EXT4-fs (mmcblk0p28): ext4_orphan_cleanup: deleting unreferenced inode 32310
  551. [ 11.902648] EXT4-fs (mmcblk0p28): 1 orphan inode deleted
  552. [ 11.907440] EXT4-fs (mmcblk0p28): recovery complete
  553. [ 11.942321] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc
  554. [ 11.953460] SELinux: initialized (dev mmcblk0p28, type ext4), uses xattr
  555. [ 11.981018] EXT4-fs (mmcblk0p12): warning: maximal mount count reached, running e2fsck is recommended
  556. [ 11.994384] EXT4-fs (mmcblk0p12): recovery complete
  557. [ 12.002655] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nodelalloc
  558. [ 12.013275] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
  559. [ 12.046356] EXT4-fs (mmcblk0p29): warning: maximal mount count reached, running e2fsck is recommended
  560. [ 12.061950] EXT4-fs (mmcblk0p29): recovery complete
  561. [ 12.070831] EXT4-fs (mmcblk0p29): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
  562. [ 12.080444] SELinux: initialized (dev mmcblk0p29, type ext4), uses xattr
  563. [ 12.091339] EXT4-fs (mmcblk0p22): warning: maximal mount count reached, running e2fsck is recommended
  564. [ 12.103668] EXT4-fs (mmcblk0p22): recovery complete
  565. [ 12.107604] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
  566. [ 12.117401] SELinux: initialized (dev mmcblk0p22, type ext4), uses xattr
  567. [ 12.128143] EXT4-fs (mmcblk0p20): warning: maximal mount count reached, running e2fsck is recommended
  568. [ 12.141082] EXT4-fs (mmcblk0p20): recovery complete
  569. [ 12.145111] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
  570. [ 12.154785] SELinux: initialized (dev mmcblk0p20, type ext4), uses xattr
  571. [ 12.175598] SELinux: initialized (dev mmcblk0p1, type vfat), uses mountpoint labeling
  572. [ 12.273345] type=1400 audit(10115018.264:3): avc: denied { read } for pid=144 comm="sh" name="image" dev=mmcblk0p1 ino=2 scontext=u:r:kickstart:s0 tcontext=u:object_r:radio_efs_file:s0 tclass=dir
  573. [ 12.293762] type=1400 audit(10115018.284:4): avc: denied { open } for pid=144 comm="sh" name="image" dev=mmcblk0p1 ino=2 scontext=u:r:kickstart:s0 tcontext=u:object_r:radio_efs_file:s0 tclass=dir
  574. [ 12.312927] type=1400 audit(10115018.304:5): avc: denied { remount } for pid=143 comm="mount" scontext=u:r:kickstart:s0 tcontext=u:object_r:labeledfs:s0 tclass=filesystem
  575. [ 12.328216] type=1400 audit(10115018.314:6): avc: denied { setsched } for pid=143 comm="mount" scontext=u:r:kickstart:s0 tcontext=u:r:kernel:s0 tclass=process
  576. [ 12.342559] type=1400 audit(10115018.334:7): avc: denied { getattr } for pid=145 comm="ls" path="/system/etc/firmware/modem.b00" dev=mmcblk0p26 ino=16697 scontext=u:r:kickstart:s0 tcontext=u:object_r:system_file:s0 tclass=lnk_file
  577. [ 12.348571] EXT4-fs (mmcblk0p26): re-mounted. Opts: (null)
  578. [ 12.357757] type=1400 audit(10115018.334:8): avc: denied { setattr } for pid=147 comm="chmod" name="misc_mdm" dev=mmcblk0p26 ino=16696 scontext=u:r:kickstart:s0 tcontext=u:object_r:unlabeled:s0 tclass=dir
  579. [ 12.366882] type=1400 audit(10115018.334:9): avc: denied { mounton } for pid=149 comm="mount" path="/system/etc/firmware/misc_mdm" dev=mmcblk0p26 ino=16696 scontext=u:r:kickstart:s0 tcontext=u:object_r:unlabeled:s0 tclass=dir
  580. [ 12.379455] type=1400 audit(10115018.334:10): avc: denied { relabelfrom } for pid=149 comm="mount" scontext=u:r:kickstart:s0 tcontext=u:object_r:sdcard_external:s0 tclass=filesystem
  581. [ 12.379486] type=1400 audit(10115018.334:11): avc: denied { relabelto } for pid=149 comm="mount" scontext=u:r:kickstart:s0 tcontext=u:object_r:radio_efs_file:s0 tclass=filesystem
  582. [ 12.379516] SELinux: initialized (dev mmcblk0p14, type vfat), uses mountpoint labeling
  583. [ 12.583801] EXT4-fs (mmcblk0p26): re-mounted. Opts: (null)
  584. [ 12.696777] [BSP-USB][enable_store] 0
  585. [ 12.699523] android_usb: already disabled
  586. [ 12.713958] avc: denied { set } for property=ctl.ril-daemon scontext=u:r:init_shell:s0 tcontext=u:object_r:ctl_rildaemon_prop:s0 tclass=property_service
  587. [ 12.732971] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
  588. [ 12.743835] avc: denied { set } for property=ctl.qmuxd scontext=u:r:init_shell:s0 tcontext=u:object_r:ctl_default_prop:s0 tclass=property_service
  589. [ 12.757293] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
  590. [ 12.767486] [BSP-USB][enable_store] 1
  591. [ 12.786529] [BSP-USB][enable_store] 0
  592. [ 12.790374] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
  593. [ 12.799652] [BSP-USB][functions_store] mass_storage
  594. [ 12.805236] [BSP-USB][enable_store] 1
  595. [ 12.811187] warning: `rild' uses 32-bit capabilities (legacy support in use)
  596. [ 12.817718] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
  597. [ 12.870391] charm_ap2mdm_kpdpwr_on
  598. [ 13.009796] QSEECOM: qseecom_release: data->released == false
  599. [ 14.110351] msm_battery_gauge_alarm_notify: status: 1
  600. [ 14.114624] mdp4_dtv_start: <ID=0 1920x1080 (88,44,148), (4,5,36) 74MHz>
  601. [ 14.142181] dtv_on: tv_src_clk=74250kHz, pm_qos_rate=74250kHz, [0]
  602. [ 14.151092] hdmi_msm hdmi_msm.1: power: ON (1920x1080 74250000)
  603. [ 14.156158] hdmi_core_power(on): success
  604. [ 14.159973] hdmi_msm hdmi_msm.1: HPD: panel power without 'hpd' feature on
  605. [ 14.230895] hdmi_msm hdmi_msm.1: power=ON DVI= ON
  606. [ 14.235534] mdp4_dtv_on:
  607. [ 14.325469] msm_battery_gauge_alarm_notify: status: 0
  608. [ 14.329559] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  609. [ 14.351165] mdp4_dtv_off:
  610. [ 14.353637] hdmi_msm hdmi_msm.1: power: OFF (audio off, Reset Core)
  611. [ 14.359161] hdmi_msm hdmi_msm.1: HDMI Audio: Disabled
  612. [ 14.363586] pil_qdsp6v3 pil_qdsp6v3: brought out of reset
  613. [ 14.371704] hdmi_core_power(off): success
  614. [ 14.374938] hdmi_core_power(on): success
  615. [ 14.380310] hdmi_core_power(off): success
  616. [ 14.384613] dtv_off_sub
  617. [ 14.395294] apr_tal:Q6 Is Up
  618. [ 15.322662] msm_release_control: control0
  619. [ 15.325714] __msm_release, open count =0
  620. [ 15.329711] __msm_release, release VFE
  621. [ 15.558746] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 85330000
  622. [ 15.568145] mdp4_overlay_mdp_perf_upd mdp bw is changed [1] from 4 to 2
  623. [ 15.595458] auddev_cb_function, evt_id=64,
  624. [ 15.607788] msm_reset_put:Resetting all devices
  625. [ 15.612457] msm_clear_all_session:
  626. [ 16.111328] msm_battery_gauge_alarm_notify: status: 1
  627. [ 16.261016] msm_battery_gauge_alarm_notify: status: 0
  628. [ 16.270904] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  629. [ 16.610443] msm_battery_gauge_alarm_notify: status: 1
  630. [ 16.665710] msm8x60_multi_sdio_slot_status_irq: MDM2AP_SYNC Status = 1
  631. [ 16.671386] msm8x60_multi_sdio_slot_status_irq: calling sdc2_status_notify_cb
  632. [ 16.678497] msm8x60_multi_sdio_slot_status_irq: calling sdc5_status_notify_cb
  633. [ 16.771789] mmc1: new high speed SDIO card at address 0002
  634. [ 16.781036] mmc mmc1:0002: SDIO Card claimed.
  635. [ 16.793548] sdio_al:setup bootloader on card 1
  636. [ 16.797149] sdio_al: SDIOC BOOT SW version 0x30001
  637. [ 16.821197] sdio_al:Bootloader Worker Started, wait for bootloader_done event..
  638. [ 16.821228] sdio_al: sdio_dld_set_op_mode - FLASHLESS BOOT - Op_Mode is set to SDIO DLD NORMAL MODE
  639. [ 16.821258] sdio_al: sdio_dld_set_op_mode - FLASHLESS BOOT - Op_Mode is set to SDIO DLD NORMAL MODE
  640. [ 16.827270] sdio_al:In Flashless boot, waiting for its completion
  641. [ 16.827301] sdio_al:free sdioc_boot_sw_header.
  642. [ 16.923065] mmc4: new high speed SDIO card at address 0002
  643. [ 16.941009] mmc mmc4:0002: SDIO Card claimed.
  644. [ 16.951538] sdio_al:wait for bootloader completion on card 4
  645. [ 16.961029] sdio_al:Bootloader Worker Started, wait for bootloader_done event..
  646. [ 17.141784] pil_modem pil_modem: brought out of reset
  647. [ 17.146667] smd_pkt_open: DATA5_CNTL open failed -19
  648. [ 17.159881] sdio_al: sdio_dld_open, TTY DEVICE FOR FLASHLESS BOOT OPENED
  649. [ 17.276123] Notify: smsm init
  650. [ 17.278167] _smem_log_init: no power log or log_idx allocated
  651. [ 17.291656] msm_battery_gauge_alarm_notify: status: 0
  652. [ 17.296356] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  653. [ 17.369232] rpcrouter_smd_remote_notify: smd opened 0x (null)
  654. [ 17.378784] rmt_storage_get_ramfs: RAMFS entry: addr = 0x46100000, size = 0x00300000
  655. [ 17.390228] rmt_storage_get_ramfs: RAMFS entry: addr = 0x42e00000, size = 0x00002000
  656. [ 17.402191] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized
  657. [ 17.420196] open partition /boot/modem_fs1 handle=1
  658. [ 17.431335] open partition /boot/modem_fs2 handle=2
  659. [ 17.437042] open partition /boot/modem_fsg handle=3
  660. [ 17.664306] smd_pkt_open: DATA5_CNTL open failed -19
  661. [ 17.718139] QSEECOM: qseecom_release: data->released == false
  662. [ 18.172546] smd_pkt_open: DATA5_CNTL open failed -19
  663. [ 18.692169] smd_pkt_open: DATA5_CNTL open failed -19
  664. [ 18.776580] apr_tal:Modem Is Up
  665. [ 19.206970] smd_pkt_open: DATA5_CNTL open failed -19
  666. [ 19.717864] smd_pkt_open: DATA5_CNTL open failed -19
  667. [ 20.238159] smd_pkt_open: DATA5_CNTL open failed -19
  668. [ 20.748352] smd_pkt_open: DATA5_CNTL open failed -19
  669. [ 21.244506] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - DURATION IN MSEC = 4080
  670. [ 21.252410] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - BYTES WRITTEN ON SDIO BUS = 25958476...BYTES SENT BY TTY = 25958476
  671. [ 21.262908] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - BYTES RECEIVED ON SDIO BUS = 1672...BYTES SENT TO TTY = 1672
  672. [ 21.273803] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - THROUGHPUT=50 Mbit/Sec
  673. [ 21.281066] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT DL_BUFFER_SIZE=16 KB..CLIENT UL_BUFFER=48 KB
  674. [ 21.293579] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - HOST OUTGOING BUFFER_SIZE=48 KB
  675. [ 21.301757] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT DL BUFFER ADDRESS = 0x4000
  676. [ 21.310485] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT UP BUFFER ADDRESS = 0x8000
  677. [ 21.321838] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - UPLINK BUFFER - READ POINTER = 6220
  678. [ 21.331634] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - UPLINK BUFFER - WRITE POINTER = 6220
  679. [ 21.340332] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - DOWNLINK BUFFER - READ POINTER = 1672
  680. [ 21.349914] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - DOWNLINK BUFFER - WRITE POINTER = 1672
  681. [ 21.359497] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - HOST - OUTGOING BUFFER - READ POINTER = 6220
  682. [ 21.370666] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - HOST - OUTGOING BUFFER - WRITE POINTER = 6220
  683. [ 21.379486] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - END DEBUG INFO
  684. [ 21.386199] sdio_al:Got bootloader_done event..
  685. [ 21.391052] sdio_al:Got bootloader_done event..
  686. [ 21.395233] sdio_al: sdio_dld_close - Freeing sdio_dld data structure, and returning...
  687. [ 21.404876] smd_pkt_open: DATA5_CNTL open failed -19
  688. [ 21.924072] smd_pkt_open: DATA5_CNTL open failed -19
  689. [ 22.161407] sdio_al:user_irq enabled
  690. [ 22.164916] sdio_al:SDIOC SW version 0x40202, sdio_al major 0x4 minor 0x202
  691. [ 22.172454] sdio_al:user_irq enabled
  692. [ 22.175842] sdio_al:SDIOC SW version 0x40202, sdio_al major 0x4 minor 0x202
  693. [ 22.176361] sdio_al:Channel=SDIO_RMNT, state=1
  694. [ 22.176361] sdio_al:Channel=SDIO_DUN, state=1
  695. [ 22.176391] sdio_al:Channel=SDIO_CIQ, state=1
  696. [ 22.176391] sdio_al:Channel=SDIO_ULS, state=1
  697. [ 22.176391] sdio_al:Channel=, state=0
  698. [ 22.176422] sdio_al:Channel=, state=0
  699. [ 22.176422] sdio_al:sdio_al_setup for card 1
  700. [ 22.178466] sdio_al:claim IRQ for card 1
  701. [ 22.215881] sdio_al:Channel=SDIO_RPC, state=1
  702. [ 22.220245] sdio_al:Channel=SDIO_QMI, state=1
  703. [ 22.225128] sdio_al:Channel=SDIO_DIAG, state=1
  704. [ 22.229461] sdio_al:Channel=SDIO_SMEM, state=1
  705. [ 22.234588] sdio_al:Channel=, state=0
  706. [ 22.237365] sdio_al:Channel=, state=0
  707. [ 22.251281] sdio_al:sdio_al_setup for card 4
  708. [ 22.257232] sdio_al:claim IRQ for card 4
  709. [ 22.263122] rpcrouter_sdio_remote_probe Called
  710. [ 22.269073] sdio_al:ch SDIO_RPC read_threshold=1, write_threshold=576, min_write_avail=544, max_rx_threshold=1088, max_tx_threshold=1152
  711. [ 22.283874] sdio_al:sdio_open SDIO_RPC completed OK
  712. [ 22.290313] sdio_al: setting channel SDIO_RPC as lpm_chan
  713. [ 22.294891] rpcrouter_sdio_remote_probe Completed
  714. [ 22.444671] smd_pkt_open: DATA5_CNTL open failed -19
  715. [ 22.503448] sdio_al:ch SDIO_QMI read_threshold=1, write_threshold=4096, min_write_avail=4096, max_rx_threshold=8192, max_tx_threshold=8192
  716. [ 22.518829] sdio_al:sdio_open SDIO_QMI completed OK
  717. [ 22.526306] sdio_ctl_probe Begins
  718. [ 22.539093] sdio_al:ch SDIO_DIAG read_threshold=1, write_threshold=4096, min_write_avail=4096, max_rx_threshold=24576, max_tx_threshold=8192
  719. [ 22.551330] sdio_al:sdio_open SDIO_DIAG completed OK
  720. [ 22.555725] DIAG opened SDIO channel
  721. [ 22.564971] sdio_al:ch SDIO_RMNT read_threshold=1, write_threshold=4096, min_write_avail=1600, max_rx_threshold=15360, max_tx_threshold=8192
  722. [ 22.581359] sdio_al:sdio_open SDIO_RMNT completed OK
  723. [ 22.585784] sdio_al: setting channel SDIO_RMNT as lpm_chan
  724. [ 22.609680] [sdio_debug_probe] ++
  725. [ 22.613708] sdio_al:ch SDIO_ULS read_threshold=1, write_threshold=2560, min_write_avail=1024, max_rx_threshold=20480, max_tx_threshold=5120
  726. [ 22.626312] sdio_al:sdio_open SDIO_ULS completed OK
  727. [ 22.630249] [sdio_debug_probe] opened SDIO debug channel
  728. [ 22.635803] [sdio_debug_probe] --
  729. [ 22.716156] rmt_storage_probe: Remote storage RPC client (0x300100a7)initialized
  730. [ 22.747833] QSEECOM: qseecom_release: data->released == false
  731. [ 22.964294] smd_pkt_open: DATA5_CNTL open failed -19
  732. [ 23.484252] smd_pkt_open: DATA5_CNTL open failed -19
  733. [ 24.549468] smd_pkt_open: DATA12_CNTL open failed -19
  734. [ 24.561737] smd_pkt_open: DATA13_CNTL open failed -19
  735. [ 24.576446] smd_pkt_open: DATA14_CNTL open failed -19
  736. [ 24.740844] msm_sdio_dmux_open: opened ch 0
  737. [ 25.247070] msm_sdio_dmux_open: opened ch 1
  738. [ 25.251678] msm_sdio_dmux_open: opened ch 2
  739. [ 25.256042] msm_sdio_dmux_open: opened ch 3
  740. [ 25.263305] msm_sdio_dmux_open: opened ch 4
  741. [ 25.266845] msm_sdio_dmux_open: opened ch 5
  742. [ 25.271026] msm_sdio_dmux_open: opened ch 6
  743. [ 25.274993] msm_sdio_dmux_open: opened ch 7
  744. [ 26.577148] open partition /q6_fs1_parti_id_0x59 handle=4
  745. [ 26.588806] sdio_al:ch SDIO_SMEM read_threshold=1, write_threshold=2560, min_write_avail=1024, max_rx_threshold=20480, max_tx_threshold=5120
  746. [ 26.608795] sdio_al:sdio_open SDIO_SMEM completed OK
  747. [ 26.619812] open partition /q6_fs2_parti_id_0x5A handle=5
  748. [ 26.754791] smd_pkt_open: DATA12_CNTL open failed -19
  749. [ 26.771942] smd_pkt_open: DATA13_CNTL open failed -19
  750. [ 26.790161] smd_pkt_open: DATA14_CNTL open failed -19
  751. [ 27.926391] sensor_common_power_set pwr_mask(2), on(0), sensor(1)
  752. [ 27.932464] QSEECOM: qseecom_release: data->released == false
  753. [ 27.938964] sensor_common_power_set pwr_mask(2), on(0), sensor(1)
  754. [ 27.944946] sensor_common_power_set pwr_mask(2), on(0), sensor(1)
  755. [ 27.951110] sensor_common_power_set pwr_mask(2), on(0), sensor(1)
  756. [ 27.957092] sensor_common_power_set pwr_mask(2), on(0), sensor(1)
  757. [ 27.963012] sensor_common_power_set pwr_mask(2), on(0), sensor(1)
  758. [ 27.969207] sensor_common_power_set pwr_mask(2), on(0), sensor(1)
  759. [ 27.975555] sensor_common_power_set pwr_mask(2), on(0), sensor(1)
  760. [ 27.981536] sensor_common_power_set pwr_mask(2), on(0), sensor(1)
  761. [ 32.976165] QSEECOM: qseecom_release: data->released == false
  762. [ 37.732452] QSEECOM: qseecom_release: data->released == false
  763. [ 41.313873] batt_gauge_cal_nv_read
  764. [ 41.318389] ######### [FUEL] NV Val = 87 ########
  765. [ 41.340820] vibrator_enable is stating ...
  766. [ 41.344696] android_vibrator_off is stating ...
  767. [ 41.348754] LGE: vibrator_power_set enable=0
  768. [ 41.353057] android_vibrator_off is exting ...
  769. [ 41.357757] vibrator_enable is exting ...
  770. [ 41.366577] request_suspend_state: wakeup (3->0) at 41265746695 (1970-04-28 01:44:07.363663349 UTC)
  771. [ 41.465209] sensor_common_power_set pwr_mask(2), on(1), sensor(1)
  772. [ 41.630706] init: no such service 'wifi-crda'
  773. [ 41.728424] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
  774. [ 41.735412] SELinux: initialized (dev dm-0, type ext4), uses xattr
  775. [ 41.877441] EXT4-fs (dm-0): re-mounted. Opts: (null)
  776. [ 41.891967] EXT4-fs (dm-0): re-mounted. Opts: (null)
  777. [ 42.198394] QSEECOM: qseecom_release: data->released == false
  778. [ 42.937164] dhd_open: firmware_path = /system/etc/firmware/fw_bcmdhd_p2p.bin
  779. [ 42.943450] dhd_open: ifidx 0
  780. [ 42.946228]
  781. [ 42.946228] Dongle Host Driver, version 1.15.3
  782. [ 42.952301] wl_android_wifi_on in
  783. [ 42.955444] =========== WLAN going back to live ========
  784. [ 43.161285] bcm432x_sdcc_wlan_slot_status: 34 1
  785. [ 43.164886] mmc3: Slot status change detected (0 -> 1)
  786. [ 43.293609] acc_open
  787. [ 43.294921] acc_release
  788. [ 43.370391] sdio_reset_comm():
  789. [ 43.379547] Enter dhd_bus_start:
  790. [ 43.582702] Initial WLC_GET_AP value is [0]
  791. [ 43.586364] Firmware up: op_mode=4, Broadcom Dongle Host Driver mac=00:90:4c:c5:12:38
  792. [ 43.606567] vibrator_enable is stating ...
  793. [ 43.609924] android_vibrator_off is stating ...
  794. [ 43.612976] dhd_preinit_ioctls set keeplive failed -1
  795. [ 43.615814] dhd_preinit_config : config path : /data/misc/wifi/config
  796. [ 43.616760] dhd_preinit_proc: Change Macaddr = F0:1C:13:46:15:36
  797. [ 43.632110] vibrator_enable is exting ...
  798. [ 43.636077] LGE: vibrator_power_set enable=0
  799. [ 43.640411] android_vibrator_off is exting ...
  800. [ 43.646697] vibrator_enable is stating ...
  801. [ 43.650238] android_vibrator_on is stating ...
  802. [ 43.654998] LGE: vibrator_power_set enable=1
  803. [ 43.656829] vibrator_enable is exting ...
  804. [ 43.663818] android_vibrator_on is exting ...
  805. [ 43.665039] vibrator_enable is stating ...
  806. [ 43.665069] android_vibrator_off is stating ...
  807. [ 43.665069] LGE: vibrator_power_set enable=0
  808. [ 43.665283] vibrator_enable is exting ...
  809. [ 43.684722] android_vibrator_off is exting ...
  810. [ 43.689727] Firmware version = wl0: Mar 16 2012 18:47:05 version 5.90.100.330 (WFD)
  811. [ 43.697723] android_vibrator_off is stating ...
  812. [ 43.702087] LGE: vibrator_power_set enable=0
  813. [ 43.705963] android_vibrator_off is exting ...
  814. [ 43.712249] CFG80211-ERROR) wl_cfg80211_up : WLC_GET_VERSION=1
  815. [ 43.718658] p2p0: p2p_dev_addr=f2:1c:13:46:15:36
  816. [ 44.222106] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
  817. [ 44.233917] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
  818. [ 45.506011] wl_bss_connect_done succeeded
  819. [ 45.561431] wl_bss_connect_done succeeded
  820. [ 47.190246] QSEECOM: qseecom_release: data->released == false
  821. [ 47.296508] SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
  822. [ 47.320617] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  823. [ 47.527923] vibrator_enable is stating ...
  824. [ 47.537078] android_vibrator_off is stating ...
  825. [ 47.541046] LGE: vibrator_power_set enable=0
  826. [ 47.545471] vibrator_enable is exting ...
  827. [ 47.549468] android_vibrator_off is exting ...
  828. [ 48.247100] net_ratelimit: 10 callbacks suppressed
  829. [ 48.251098] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  830. [ 48.961791] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  831. [ 48.966430] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
  832. [ 48.981689] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
  833. [ 51.769409] alarm_set_rtc: Failed to set RTC, time will be lost on reboot
  834. [ 52.614959] QSEECOM: qseecom_release: data->released == false
  835. [ 53.513244] MANUAL_TEST_MODE nv : 0
  836. [ 53.515899] [android_get_manual_test_mode] get manual test mode - 0
  837. [ 53.563568] boot_info_read, flag : 0
  838. [ 53.566497] boot_info_write, flag : 1
  839. [ 53.569946] did_dload_func, flag : 0
  840. [ 53.569976] read block1
  841. [ 53.570434] read block
  842. [ 53.581756] read 351272960 block
  843. [ 53.586090] remote_did_rpc, start OEM_RAPI
  844. [ 53.590301] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  845. [ 53.595123] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
  846. [ 53.601501] remote_did_rpc, output lenght =192is
  847. [ 53.601531] remote_did_rpc, lge_mmc_scan_partitions
  848. [ 53.601531] remote_did_rpc, lge_mmc_find_partition_by_name
  849. [ 53.626800] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
  850. [ 53.777343] tsens_tz_set_mode: mode: 0 --> 1
  851. [ 53.891479] p2p0: no IPv6 routers present
  852. [ 54.416015] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  853. [ 54.421081] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
  854. [ 54.432830] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
  855. [ 54.506622] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  856. [ 54.511077] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
  857. [ 54.522644] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
  858. [ 56.519592] transport_store: usb cable is not connected
  859. [ 56.855407] alarm_set_rtc: Failed to set RTC, time will be lost on reboot
  860. [ 57.893157] avc: denied { set } for property=net.rmnet_sdio0.dns1 scontext=u:r:netmgrd:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service
  861. [ 57.918701] QSEECOM: qseecom_release: data->released == false
  862. [ 59.132110] wlan0: no IPv6 routers present
  863. [ 62.329559] QSEECOM: qseecom_release: data->released == false
  864. [ 67.316864] pm8058_get_battery_temperature_adc: therm_raw is 1020
  865. [ 67.600463] QSEECOM: qseecom_release: data->released == false
  866. [ 71.920532] msm_sdio_dmux_open: Already opened 0
  867. [ 71.925537] msm_sdio_dmux_open: opened ch 0
  868. [ 72.009521] NOHZ: local_softirq_pending 08
  869. [ 73.072875] QSEECOM: qseecom_release: data->released == false
  870. [ 77.933532] QSEECOM: qseecom_release: data->released == false
  871. [ 82.889373] QSEECOM: qseecom_release: data->released == false
  872. [ 84.463775] sensor_common_power_set pwr_mask(3), on(0), sensor(1)
  873. [ 84.472167] mdp4_dsi_video_wait4vsync timeout ret=0
  874. [ 84.503387] entering mipi_lgit_lcd_off ..
  875. [ 84.592315] exting mipi_lgit_lcd_off ..
  876. [ 84.598175] mipi_dsi_panel_power(off): success
  877. [ 84.621887] request_suspend_state: sleep (0->3) at 84519826656 (2013-10-31 22:01:04.481894809 UTC)
  878. [ 84.630371] sensor_common_power_set pwr_mask(2), on(0), sensor(1)
  879. [ 84.636108] hall_early_suspend:
  880. [ 84.662139] dhd_set_suspend: force extra Suspend setting
  881. [ 84.670867] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=2 Listen=10
  882. [ 84.679565] dtv_pipe is not configured yet
  883. [ 85.037567] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  884. [ 85.042083] Unknown PRIVATE command SETSUSPENDMODE 1 - ignored
  885. [ 85.048645] vibrator_enable is stating ...
  886. [ 85.051971] android_vibrator_off is stating ...
  887. [ 85.056945] LGE: vibrator_power_set enable=0
  888. [ 85.060882] android_vibrator_off is exting ...
  889. [ 85.065429] vibrator_enable is exting ...
  890. [ 87.928100] QSEECOM: qseecom_release: data->released == false
  891. [ 89.276214] binder: 559:847 transaction failed 29189, size 240-0
  892. [ 92.296203] QSEECOM: qseecom_release: data->released == false
  893. [ 97.325897] QSEECOM: qseecom_release: data->released == false
  894. [ 102.349884] QSEECOM: qseecom_release: data->released == false
  895. [ 107.377014] QSEECOM: qseecom_release: data->released == false
  896. [ 112.402191] QSEECOM: qseecom_release: data->released == false
  897. [ 117.578704] QSEECOM: qseecom_release: data->released == false
  898. [ 122.611297] QSEECOM: qseecom_release: data->released == false
  899. [ 127.315887] pm8058_get_battery_temperature_adc: therm_raw is 1028
  900. [ 127.634338] QSEECOM: qseecom_release: data->released == false
  901. [ 132.665344] QSEECOM: qseecom_release: data->released == false
  902. [ 137.968933] QSEECOM: qseecom_release: data->released == false
  903. [ 143.021301] QSEECOM: qseecom_release: data->released == false
  904. [ 147.219940] QSEECOM: qseecom_release: data->released == false
  905. [ 152.248229] QSEECOM: qseecom_release: data->released == false
  906. [ 157.277099] QSEECOM: qseecom_release: data->released == false
  907. [ 162.335845] QSEECOM: qseecom_release: data->released == false
  908. [ 167.380340] QSEECOM: qseecom_release: data->released == false
  909. [ 172.423278] QSEECOM: qseecom_release: data->released == false
  910. [ 177.453338] QSEECOM: qseecom_release: data->released == false
  911. [ 182.477142] QSEECOM: qseecom_release: data->released == false
  912. [ 187.314819] pm8058_get_battery_temperature_adc: therm_raw is 1036
  913. [ 187.506988] QSEECOM: qseecom_release: data->released == false
  914. [ 192.536682] QSEECOM: qseecom_release: data->released == false
  915. [ 197.566955] QSEECOM: qseecom_release: data->released == false
  916. [ 202.612030] QSEECOM: qseecom_release: data->released == false
  917. [ 207.650665] QSEECOM: qseecom_release: data->released == false
  918. [ 212.261779] QSEECOM: qseecom_release: data->released == false
  919. [ 214.530151] sensor_common_power_set pwr_mask(2), on(1), sensor(1)
  920. [ 214.547271] request_suspend_state: wakeup (3->0) at 214445211178 (2013-10-31 22:03:14.407279331 UTC)
  921. [ 214.627716] hall_late_resume:
  922. [ 214.627716] sensor_common_power_set pwr_mask(3), on(1), sensor(1)
  923. [ 214.648956] mdp4_csc_config: Block type 10 isn't supported by CSC.
  924. [ 214.648956] mdp4_csc_config: Block type 8 isn't supported by CSC.
  925. [ 214.658874] entering mipi_lgit_lcd_on ..
  926. [ 214.812164] exting mipi_lgit_lcd_on ..
  927. [ 214.894104] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 85330000
  928. [ 214.901885] mdp4_overlay_mdp_perf_upd mdp bw is changed [1] from 4 to 2
  929. [ 214.945648] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  930. [ 214.950073] Unknown PRIVATE command SETSUSPENDMODE 0 - ignored
  931. [ 216.900787] sensor_common_power_set pwr_mask(3), on(0), sensor(1)
  932. [ 217.082305] mdp4_dsi_video_wait4vsync timeout ret=0
  933. [ 217.112304] entering mipi_lgit_lcd_off ..
  934. [ 217.202850] exting mipi_lgit_lcd_off ..
  935. [ 217.208862] mipi_dsi_panel_power(off): success
  936. [ 217.232147] request_suspend_state: sleep (0->3) at 217130025631 (2013-10-31 22:03:17.092063267 UTC)
  937. [ 217.241455] sensor_common_power_set pwr_mask(2), on(0), sensor(1)
  938. [ 217.246734] hall_early_suspend:
  939. [ 217.272155] dhd_set_suspend: force extra Suspend setting
  940. [ 217.291839] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=2 Listen=10
  941. [ 217.305877] dtv_pipe is not configured yet
  942. [ 217.380767] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  943. [ 217.385772] Unknown PRIVATE command SETSUSPENDMODE 1 - ignored
  944. [ 217.392272] vibrator_enable is stating ...
  945. [ 217.395538] android_vibrator_off is stating ...
  946. [ 217.400207] LGE: vibrator_power_set enable=0
  947. [ 217.412139] android_vibrator_off is exting ...
  948. [ 217.415802] vibrator_enable is exting ...
  949. [ 217.971496] QSEECOM: qseecom_release: data->released == false
  950. [ 222.580566] QSEECOM: qseecom_release: data->released == false
  951. [ 227.610778] QSEECOM: qseecom_release: data->released == false
  952. [ 232.640594] QSEECOM: qseecom_release: data->released == false
  953. [ 237.670562] QSEECOM: qseecom_release: data->released == false
  954. [ 242.700683] QSEECOM: qseecom_release: data->released == false
  955. [ 246.126892] Freezing user space processes ... (elapsed 0.03 seconds) done.
  956. [ 246.163116] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  957. [ 246.190765] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  958. [ 246.196777] sensor_common_power_set pwr_mask(2), on(0), sensor(2)
  959. [ 246.202728] sensor_common_power_set pwr_mask(0), on(0), sensor(4)
  960. [ 246.214965] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  961. [ 246.220275] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  962. [ 246.227478] PM: suspend of devices complete after 39.978 msecs
  963. [ 246.234283] PM: late suspend of devices complete after 1.831 msecs
  964. [ 246.239501] Disabling non-boot CPUs ...
  965. [ 246.243682] msm_pm_enter
  966. [ 246.243682] msm_pm_enter: power collapse
  967. [ 246.243682] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  968. [ 246.243682] msm_pm_enter: return
  969. [ 246.245117] PM: early resume of devices complete after 1.220 msecs
  970. [ 246.251373] wakeup wake lock: alarm_rtc
  971. [ 246.254760] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  972. [ 246.260620] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  973. [ 246.266296] bcm432x_sdcc_wlan_slot_status: 34 1
  974. [ 246.273345] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  975. [ 246.279998] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  976. [ 246.293487] pm8058_get_battery_temperature_adc: therm_raw is 1040
  977. [ 246.302581] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  978. [ 246.330718] PM: resume of devices complete after 76.253 msecs
  979. [ 246.336730] Restarting tasks ... done.
  980. [ 246.352600] suspend: exit suspend, ret = 0 (2013-10-31 22:04:02.071171091 UTC)
  981. [ 246.845489] Freezing user space processes ... (elapsed 0.02 seconds) done.
  982. [ 247.122436] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  983. [ 247.151885] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  984. [ 247.157897] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  985. [ 247.163574] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  986. [ 247.171966] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  987. [ 247.177520] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  988. [ 247.186248] PM: suspend of devices complete after 37.976 msecs
  989. [ 247.193145] PM: late suspend of devices complete after 2.013 msecs
  990. [ 247.198455] Disabling non-boot CPUs ...
  991. [ 247.202514] msm_pm_enter
  992. [ 247.202514] msm_pm_enter: power collapse
  993. [ 247.202514] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  994. [ 247.202514] msm_pm_enter: return
  995. [ 247.204071] PM: early resume of devices complete after 1.342 msecs
  996. [ 247.210327] wakeup wake lock: wlan_wake
  997. [ 247.213745] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  998. [ 247.219665] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  999. [ 247.225250] bcm432x_sdcc_wlan_slot_status: 34 1
  1000. [ 247.231414] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1001. [ 247.238067] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1002. [ 247.245605] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1003. [ 247.254394] pm8058_get_battery_temperature_adc: therm_raw is 1045
  1004. [ 247.280029] PM: resume of devices complete after 66.631 msecs
  1005. [ 247.286132] Restarting tasks ... done.
  1006. [ 247.301757] suspend: exit suspend, ret = 0 (2013-10-31 22:04:42.070989180 UTC)
  1007. [ 247.722534] QSEECOM: qseecom_release: data->released == false
  1008. [ 252.752441] QSEECOM: qseecom_release: data->released == false
  1009. [ 257.782531] QSEECOM: qseecom_release: data->released == false
  1010. [ 262.812438] QSEECOM: qseecom_release: data->released == false
  1011. [ 267.842529] QSEECOM: qseecom_release: data->released == false
  1012. [ 270.973388] Freezing user space processes ... (elapsed 0.01 seconds) done.
  1013. [ 271.243225] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1014. [ 271.272521] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1015. [ 271.278564] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1016. [ 271.284210] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1017. [ 271.292602] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1018. [ 271.298156] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1019. [ 271.305480] PM: suspend of devices complete after 36.590 msecs
  1020. [ 271.312316] PM: late suspend of devices complete after 1.953 msecs
  1021. [ 271.317718] Disabling non-boot CPUs ...
  1022. [ 271.321716] msm_pm_enter
  1023. [ 271.321716] msm_pm_enter: power collapse
  1024. [ 271.321716] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1025. [ 271.321716] msm_pm_enter: return
  1026. [ 271.323303] PM: early resume of devices complete after 1.342 msecs
  1027. [ 271.329559] wakeup wake lock: wlan_wake
  1028. [ 271.332916] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1029. [ 271.338958] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1030. [ 271.344451] bcm432x_sdcc_wlan_slot_status: 34 1
  1031. [ 271.350646] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1032. [ 271.357299] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1033. [ 271.364807] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1034. [ 271.373596] pm8058_get_battery_temperature_adc: therm_raw is 1047
  1035. [ 271.399230] PM: resume of devices complete after 66.701 msecs
  1036. [ 271.405395] Restarting tasks ... done.
  1037. [ 271.420593] suspend: exit suspend, ret = 0 (2013-10-31 22:05:13.070653805 UTC)
  1038. [ 272.427307] Freezing user space processes ... (elapsed 0.12 seconds) done.
  1039. [ 272.804840] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1040. [ 272.862274] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1041. [ 272.868927] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1042. [ 272.875061] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1043. [ 272.887542] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1044. [ 272.894622] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1045. [ 272.904449] PM: suspend of devices complete after 59.959 msecs
  1046. [ 272.917419] PM: late suspend of devices complete after 7.597 msecs
  1047. [ 272.923522] Disabling non-boot CPUs ...
  1048. [ 272.927734] msm_pm_enter
  1049. [ 272.927734] msm_pm_enter: power collapse
  1050. [ 272.927734] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1051. [ 272.927734] msm_pm_enter: return
  1052. [ 272.933776] PM: early resume of devices complete after 5.278 msecs
  1053. [ 272.942810] wakeup wake lock: wlan_wake
  1054. [ 272.947753] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1055. [ 272.954772] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1056. [ 272.960174] bcm432x_sdcc_wlan_slot_status: 34 1
  1057. [ 272.968780] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1058. [ 272.976593] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1059. [ 272.986297] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1060. [ 272.996368] pm8058_get_battery_temperature_adc: therm_raw is 1048
  1061. [ 273.030670] PM: resume of devices complete after 84.046 msecs
  1062. [ 273.041748] Restarting tasks ... done.
  1063. [ 273.088378] suspend: exit suspend, ret = 0 (2013-10-31 22:05:23.109413487 UTC)
  1064. [ 273.149749] QSEECOM: qseecom_release: data->released == false
  1065. [ 274.538848] Freezing user space processes ... (elapsed 0.09 seconds) done.
  1066. [ 274.637329] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1067. [ 274.693023] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1068. [ 274.699645] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1069. [ 274.705780] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1070. [ 274.718688] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1071. [ 274.725372] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1072. [ 274.735595] PM: suspend of devices complete after 60.418 msecs
  1073. [ 274.748596] PM: late suspend of devices complete after 7.628 msecs
  1074. [ 274.754760] Disabling non-boot CPUs ...
  1075. [ 274.758789] msm_pm_enter
  1076. [ 274.758789] msm_pm_enter: power collapse
  1077. [ 274.758789] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1078. [ 274.758789] msm_pm_enter: return
  1079. [ 274.764984] PM: early resume of devices complete after 5.401 msecs
  1080. [ 274.773864] wakeup wake lock: wlan_wake
  1081. [ 274.778808] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1082. [ 274.785827] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1083. [ 274.791229] bcm432x_sdcc_wlan_slot_status: 34 1
  1084. [ 274.800262] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1085. [ 274.807647] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1086. [ 274.817199] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1087. [ 274.827423] pm8058_get_battery_temperature_adc: therm_raw is 1049
  1088. [ 274.861694] PM: resume of devices complete after 84.048 msecs
  1089. [ 274.872802] Restarting tasks ... done.
  1090. [ 274.910522] suspend: exit suspend, ret = 0 (2013-10-31 22:05:26.100540283 UTC)
  1091. [ 275.917877] Freezing user space processes ... (elapsed 0.09 seconds) done.
  1092. [ 276.018127] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1093. [ 276.073822] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1094. [ 276.080444] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1095. [ 276.086547] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1096. [ 276.098999] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1097. [ 276.106109] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1098. [ 276.115936] PM: suspend of devices complete after 59.923 msecs
  1099. [ 276.129272] PM: late suspend of devices complete after 7.566 msecs
  1100. [ 276.135070] Disabling non-boot CPUs ...
  1101. [ 276.139923] msm_pm_enter
  1102. [ 276.139923] msm_pm_enter: power collapse
  1103. [ 276.139923] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1104. [ 276.139923] msm_pm_enter: return
  1105. [ 276.146240] PM: early resume of devices complete after 5.553 msecs
  1106. [ 276.155090] wakeup wake lock: alarm_rtc
  1107. [ 276.160247] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1108. [ 276.167053] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1109. [ 276.172882] bcm432x_sdcc_wlan_slot_status: 34 1
  1110. [ 276.181091] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1111. [ 276.188873] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1112. [ 276.198181] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1113. [ 276.208801] pm8058_get_battery_temperature_adc: therm_raw is 1049
  1114. [ 276.242767] PM: resume of devices complete after 83.649 msecs
  1115. [ 276.254272] Restarting tasks ... done.
  1116. [ 276.291748] suspend: exit suspend, ret = 0 (2013-10-31 22:05:31.100845004 UTC)
  1117. [ 277.487365] QSEECOM: qseecom_release: data->released == false
  1118. [ 278.739593] Freezing user space processes ... (elapsed 0.05 seconds) done.
  1119. [ 279.056579] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1120. [ 279.114532] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1121. [ 279.121154] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1122. [ 279.127380] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1123. [ 279.139862] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1124. [ 279.147094] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1125. [ 279.159423] PM: suspend of devices complete after 62.438 msecs
  1126. [ 279.172790] PM: late suspend of devices complete after 7.568 msecs
  1127. [ 279.178833] Disabling non-boot CPUs ...
  1128. [ 279.183441] msm_pm_enter
  1129. [ 279.183441] msm_pm_enter: power collapse
  1130. [ 279.183441] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1131. [ 279.183441] msm_pm_enter: return
  1132. [ 279.189178] PM: early resume of devices complete after 5.065 msecs
  1133. [ 279.198181] wakeup wake lock: alarm_rtc
  1134. [ 279.202728] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1135. [ 279.209075] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1136. [ 279.214874] bcm432x_sdcc_wlan_slot_status: 34 1
  1137. [ 279.225128] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1138. [ 279.232910] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1139. [ 279.246734] pm8058_get_battery_temperature_adc: therm_raw is 1050
  1140. [ 279.253082] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1141. [ 279.289581] PM: resume of devices complete after 87.881 msecs
  1142. [ 279.300415] Restarting tasks ... done.
  1143. [ 279.343017] suspend: exit suspend, ret = 0 (2013-10-31 22:05:48.105050819 UTC)
  1144. [ 279.801147] Freezing user space processes ... (elapsed 0.06 seconds) done.
  1145. [ 279.869201] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1146. [ 279.906799] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1147. [ 279.913116] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1148. [ 279.918670] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1149. [ 279.929382] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1150. [ 279.935821] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1151. [ 279.944458] PM: suspend of devices complete after 46.153 msecs
  1152. [ 279.954467] PM: late suspend of devices complete after 4.666 msecs
  1153. [ 279.959960] Disabling non-boot CPUs ...
  1154. [ 279.964294] msm_pm_enter
  1155. [ 279.964294] msm_pm_enter: power collapse
  1156. [ 279.964294] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1157. [ 279.964294] msm_pm_enter: return
  1158. [ 279.968048] PM: early resume of devices complete after 3.202 msecs
  1159. [ 279.975463] wakeup wake lock: alarm_rtc
  1160. [ 279.979705] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1161. [ 279.985595] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1162. [ 279.991149] bcm432x_sdcc_wlan_slot_status: 34 1
  1163. [ 280.000762] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1164. [ 280.007843] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1165. [ 280.022125] pm8058_get_battery_temperature_adc: therm_raw is 1063
  1166. [ 280.033142] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1167. [ 280.065002] PM: resume of devices complete after 86.058 msecs
  1168. [ 280.073089] Restarting tasks ... done.
  1169. [ 280.097473] suspend: exit suspend, ret = 0 (2013-10-31 22:10:16.082883515 UTC)
  1170. [ 282.590850] QSEECOM: qseecom_release: data->released == false
  1171. [ 286.599578] Freezing user space processes ... (elapsed 0.07 seconds) done.
  1172. [ 286.926849] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1173. [ 286.985290] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1174. [ 286.992340] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1175. [ 286.998474] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1176. [ 287.010986] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1177. [ 287.018188] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1178. [ 287.027862] PM: suspend of devices complete after 60.241 msecs
  1179. [ 287.041229] PM: late suspend of devices complete after 7.598 msecs
  1180. [ 287.047027] Disabling non-boot CPUs ...
  1181. [ 287.051849] msm_pm_enter
  1182. [ 287.051849] msm_pm_enter: power collapse
  1183. [ 287.051849] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1184. [ 287.051849] msm_pm_enter: return
  1185. [ 287.057983] PM: early resume of devices complete after 5.371 msecs
  1186. [ 287.066833] wakeup wake lock: alarm_rtc
  1187. [ 287.072021] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1188. [ 287.078430] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1189. [ 287.084259] bcm432x_sdcc_wlan_slot_status: 34 1
  1190. [ 287.095123] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1191. [ 287.102905] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1192. [ 287.117706] pm8058_get_battery_temperature_adc: therm_raw is 1065
  1193. [ 287.124359] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1194. [ 287.160919] PM: resume of devices complete after 90.058 msecs
  1195. [ 287.172424] Restarting tasks ... done.
  1196. [ 287.212432] suspend: exit suspend, ret = 0 (2013-10-31 22:11:05.103345262 UTC)
  1197. [ 287.632141] QSEECOM: qseecom_release: data->released == false
  1198. [ 287.832489] Freezing user space processes ... (elapsed 0.02 seconds) done.
  1199. [ 288.107330] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1200. [ 288.144836] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1201. [ 288.151062] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1202. [ 288.156585] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1203. [ 288.164337] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1204. [ 288.170013] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1205. [ 288.178466] PM: suspend of devices complete after 41.827 msecs
  1206. [ 288.185272] PM: late suspend of devices complete after 1.830 msecs
  1207. [ 288.190521] Disabling non-boot CPUs ...
  1208. [ 288.197845] msm_pm_enter
  1209. [ 288.197845] msm_pm_enter: power collapse
  1210. [ 288.197845] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1211. [ 288.197845] msm_pm_enter: return
  1212. [ 288.198089] Enabling non-boot CPUs ...
  1213. [ 288.204010] CPU1 is up
  1214. [ 288.206665] PM: early resume of devices complete after 1.250 msecs
  1215. [ 288.212951] wakeup wake lock: wlan_wake
  1216. [ 288.216278] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1217. [ 288.222320] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1218. [ 288.227844] bcm432x_sdcc_wlan_slot_status: 34 1
  1219. [ 288.233978] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1220. [ 288.240600] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1221. [ 288.248107] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1222. [ 288.256866] pm8058_get_battery_temperature_adc: therm_raw is 1070
  1223. [ 288.282562] PM: resume of devices complete after 66.601 msecs
  1224. [ 288.288604] Restarting tasks ... done.
  1225. [ 288.308013] suspend: exit suspend, ret = 0 (2013-10-31 22:14:20.074740894 UTC)
  1226. [ 289.323516] Freezing user space processes ... (elapsed 0.08 seconds) done.
  1227. [ 289.658752] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1228. [ 289.716400] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1229. [ 289.723052] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1230. [ 289.729187] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1231. [ 289.741638] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1232. [ 289.748748] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1233. [ 289.761230] PM: suspend of devices complete after 62.673 msecs
  1234. [ 289.774566] PM: late suspend of devices complete after 7.597 msecs
  1235. [ 289.780792] Disabling non-boot CPUs ...
  1236. [ 289.784820] msm_pm_enter
  1237. [ 289.784820] msm_pm_enter: power collapse
  1238. [ 289.784820] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1239. [ 289.784820] msm_pm_enter: return
  1240. [ 289.790985] PM: early resume of devices complete after 5.400 msecs
  1241. [ 289.800262] wakeup wake lock: alarm_rtc
  1242. [ 289.804992] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1243. [ 289.811920] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1244. [ 289.817352] bcm432x_sdcc_wlan_slot_status: 34 1
  1245. [ 289.828796] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1246. [ 289.836639] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1247. [ 289.851287] pm8058_get_battery_temperature_adc: therm_raw is 1072
  1248. [ 289.857543] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1249. [ 289.894622] PM: resume of devices complete after 90.755 msecs
  1250. [ 289.905578] Restarting tasks ... done.
  1251. [ 289.944091] suspend: exit suspend, ret = 0 (2013-10-31 22:15:01.101299956 UTC)
  1252. [ 292.529632] Freezing user space processes ... (elapsed 0.08 seconds) done.
  1253. [ 292.869445] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1254. [ 292.927032] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1255. [ 292.934082] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1256. [ 292.940216] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1257. [ 292.951293] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1258. [ 292.958282] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1259. [ 292.970855] PM: suspend of devices complete after 61.675 msecs
  1260. [ 292.984222] PM: late suspend of devices complete after 7.598 msecs
  1261. [ 292.990020] Disabling non-boot CPUs ...
  1262. [ 292.994873] msm_pm_enter
  1263. [ 292.994873] msm_pm_enter: power collapse
  1264. [ 292.994873] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1265. [ 292.994873] msm_pm_enter: return
  1266. [ 293.001037] PM: early resume of devices complete after 5.371 msecs
  1267. [ 293.009887] wakeup wake lock: alarm_rtc
  1268. [ 293.015045] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1269. [ 293.021575] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1270. [ 293.027374] bcm432x_sdcc_wlan_slot_status: 34 1
  1271. [ 293.038330] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1272. [ 293.046142] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1273. [ 293.060729] pm8058_get_battery_temperature_adc: therm_raw is 1072
  1274. [ 293.067413] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1275. [ 293.104156] PM: resume of devices complete after 90.260 msecs
  1276. [ 293.115570] Restarting tasks ... done.
  1277. [ 293.152313] suspend: exit suspend, ret = 0 (2013-10-31 22:15:07.100049209 UTC)
  1278. [ 293.176574] active wake lock mmc3_detect
  1279. [ 293.180023] active wake lock mmc2_detect
  1280. [ 293.217437] QSEECOM: qseecom_release: data->released == false
  1281. [ 293.264465] Freezing user space processes ... (elapsed 0.10 seconds) done.
  1282. [ 293.372833] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1283. [ 293.427215] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1284. [ 293.434265] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1285. [ 293.439971] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1286. [ 293.453277] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1287. [ 293.460174] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1288. [ 293.470672] PM: suspend of devices complete after 61.257 msecs
  1289. [ 293.483642] PM: late suspend of devices complete after 7.596 msecs
  1290. [ 293.489837] Disabling non-boot CPUs ...
  1291. [ 293.493865] msm_pm_enter
  1292. [ 293.493865] msm_pm_enter: power collapse
  1293. [ 293.493865] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1294. [ 293.493865] msm_pm_enter: return
  1295. [ 293.500030] PM: early resume of devices complete after 5.400 msecs
  1296. [ 293.508850] wakeup wake lock: alarm_rtc
  1297. [ 293.513610] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1298. [ 293.520568] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1299. [ 293.526428] bcm432x_sdcc_wlan_slot_status: 34 1
  1300. [ 293.537322] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1301. [ 293.544677] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1302. [ 293.559783] pm8058_get_battery_temperature_adc: therm_raw is 1072
  1303. [ 293.566436] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1304. [ 293.603088] PM: resume of devices complete after 90.634 msecs
  1305. [ 293.614501] Restarting tasks ... done.
  1306. [ 293.658203] suspend: exit suspend, ret = 0 (2013-10-31 22:15:21.106941138 UTC)
  1307. [ 293.759399] Freezing user space processes ... (elapsed 0.09 seconds) done.
  1308. [ 293.862670] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1309. [ 293.916809] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1310. [ 293.923400] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1311. [ 293.929595] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1312. [ 293.942108] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1313. [ 293.947784] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1314. [ 293.959625] PM: suspend of devices complete after 60.249 msecs
  1315. [ 293.972106] PM: late suspend of devices complete after 7.169 msecs
  1316. [ 293.978149] Disabling non-boot CPUs ...
  1317. [ 293.982452] msm_pm_enter
  1318. [ 293.982452] msm_pm_enter: power collapse
  1319. [ 293.982452] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1320. [ 293.982452] msm_pm_enter: return
  1321. [ 293.988494] PM: early resume of devices complete after 5.277 msecs
  1322. [ 293.997802] wakeup wake lock: alarm_rtc
  1323. [ 294.002655] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1324. [ 294.009490] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1325. [ 294.014892] bcm432x_sdcc_wlan_slot_status: 34 1
  1326. [ 294.026641] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1327. [ 294.034088] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1328. [ 294.049041] pm8058_get_battery_temperature_adc: therm_raw is 1073
  1329. [ 294.055419] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1330. [ 294.092285] PM: resume of devices complete after 90.785 msecs
  1331. [ 294.103240] Restarting tasks ... done.
  1332. [ 294.141601] suspend: exit suspend, ret = 0 (2013-10-31 22:15:40.101177854 UTC)
  1333. [ 298.731140] QSEECOM: qseecom_release: data->released == false
  1334. [ 298.773590] Freezing user space processes ... (elapsed 0.08 seconds) done.
  1335. [ 299.110778] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1336. [ 299.168457] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1337. [ 299.175476] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1338. [ 299.181304] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1339. [ 299.192993] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1340. [ 299.199554] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1341. [ 299.212341] PM: suspend of devices complete after 61.614 msecs
  1342. [ 299.225402] PM: late suspend of devices complete after 7.720 msecs
  1343. [ 299.231658] Disabling non-boot CPUs ...
  1344. [ 299.235717] msm_pm_enter
  1345. [ 299.235717] msm_pm_enter: power collapse
  1346. [ 299.235717] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1347. [ 299.235717] msm_pm_enter: return
  1348. [ 299.241882] PM: early resume of devices complete after 5.432 msecs
  1349. [ 299.251281] wakeup wake lock: alarm_rtc
  1350. [ 299.256011] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1351. [ 299.262817] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1352. [ 299.268249] bcm432x_sdcc_wlan_slot_status: 34 1
  1353. [ 299.280395] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1354. [ 299.287689] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1355. [ 299.300781] pm8058_get_battery_temperature_adc: therm_raw is 1074
  1356. [ 299.308868] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1357. [ 299.346038] PM: resume of devices complete after 91.203 msecs
  1358. [ 299.357025] Restarting tasks ... done.
  1359. [ 299.403564] suspend: exit suspend, ret = 0 (2013-10-31 22:16:41.109411884 UTC)
  1360. [ 299.648498] Freezing user space processes ... (elapsed 0.03 seconds) done.
  1361. [ 299.701995] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1362. [ 299.728515] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1363. [ 299.734588] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1364. [ 299.741058] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1365. [ 299.751434] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1366. [ 299.757812] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1367. [ 299.766540] PM: suspend of devices complete after 41.217 msecs
  1368. [ 299.777862] PM: late suspend of devices complete after 5.522 msecs
  1369. [ 299.783569] Disabling non-boot CPUs ...
  1370. [ 299.794860] msm_pm_enter
  1371. [ 299.794860] msm_pm_enter: power collapse
  1372. [ 299.794860] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1373. [ 299.794860] msm_pm_enter: return
  1374. [ 299.795593] Enabling non-boot CPUs ...
  1375. [ 299.805603] CPU1 is up
  1376. [ 299.811767] PM: early resume of devices complete after 3.935 msecs
  1377. [ 299.819732] wakeup wake lock: wlan_wake
  1378. [ 299.824218] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1379. [ 299.830749] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1380. [ 299.836120] bcm432x_sdcc_wlan_slot_status: 34 1
  1381. [ 299.844512] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1382. [ 299.851745] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1383. [ 299.860504] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1384. [ 299.870758] pm8058_get_battery_temperature_adc: therm_raw is 1074
  1385. [ 299.901947] PM: resume of devices complete after 78.525 msecs
  1386. [ 299.912231] Restarting tasks ... done.
  1387. [ 299.931030] suspend: exit suspend, ret = 0 (2013-10-31 22:17:34.080503254 UTC)
  1388. [ 302.945556] vibrator_enable is stating ...
  1389. [ 302.949432] android_vibrator_off is stating ...
  1390. [ 302.954833] LGE: vibrator_power_set enable=0
  1391. [ 302.959167] android_vibrator_off is exting ...
  1392. [ 302.966033] vibrator_enable is exting ...
  1393. [ 303.755249] QSEECOM: qseecom_release: data->released == false
  1394. [ 303.903839] acdb_mmap: PMEM is not allocated, yet!
  1395. [ 303.927001] msm_device_put:device speaker_stereo_rx_playback set 0
  1396. [ 303.932373] msm_device_put:device handset_record_tx set 0
  1397. [ 303.953186] [pcm_out.c:pcm_out_open] open
  1398. [ 303.962005] apr_tal: SMD_EVENT_OPEN
  1399. [ 303.970520] [pcm_out.c:pcm_out_open] open session id[1]
  1400. [ 303.977539] msm_device_put:device speaker_stereo_rx_playback set 1
  1401. [ 303.982788] msm_device_put:device freq =48000
  1402. [ 304.011138] afe_open: 0 48000
  1403. [ 304.037017] AMP ON: voc_codec 7 for SPEAKER_PLAYBACK_RX
  1404. [ 304.066192] pcm_out_ioctl: AUDIO_START
  1405. [ 304.248229] vibrator_enable is stating ...
  1406. [ 304.252014] android_vibrator_off is stating ...
  1407. [ 304.256195] LGE: vibrator_power_set enable=0
  1408. [ 304.260742] android_vibrator_off is exting ...
  1409. [ 304.265045] vibrator_enable is exting ...
  1410. [ 304.515319] [APDS9900] [apds9900_check_reliablility 932] ### apds9900_check_reliablility fail!! reinit device !! control reg(0),buf(20)
  1411. [ 304.529479] sensor_common_power_set pwr_mask(6), on(1), sensor(1)
  1412. [ 304.534912] request_suspend_state: wakeup (3->0) at 304424142973 (2013-10-31 22:17:38.683788900 UTC)
  1413. [ 304.576568] hall_late_resume:
  1414. [ 304.576599] sensor_common_power_set pwr_mask(7), on(1), sensor(1)
  1415. [ 304.595794] mdp4_csc_config: Block type 10 isn't supported by CSC.
  1416. [ 304.595794] mdp4_csc_config: Block type 8 isn't supported by CSC.
  1417. [ 304.602874] entering mipi_lgit_lcd_on ..
  1418. [ 304.730926] exting mipi_lgit_lcd_on ..
  1419. [ 304.781799] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 85330000
  1420. [ 304.791229] mdp4_overlay_mdp_perf_upd mdp bw is changed [1] from 4 to 2
  1421. [ 305.679626] vibrator_enable is stating ...
  1422. [ 305.683166] android_vibrator_off is stating ...
  1423. [ 305.687530] LGE: vibrator_power_set enable=0
  1424. [ 305.692016] vibrator_enable is exting ...
  1425. [ 305.696228] android_vibrator_off is exting ...
  1426. [ 305.982452] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  1427. [ 305.986846] Unknown PRIVATE command SETSUSPENDMODE 0 - ignored
  1428. [ 307.358398] msm_battery_gauge_alarm_notify: status: 1
  1429. [ 309.093688] QSEECOM: qseecom_release: data->released == false
  1430. [ 309.757171] msm_device_put:device speaker_stereo_rx_playback set 0
  1431. [ 309.762634] AMP OFF: voc_codec 0
  1432. [ 309.781219] msm_device_put:device handset_record_tx set 0
  1433. [ 309.785827] [pcm_out.c:pcm_out_release] release session id[1]
  1434. [ 313.671722] msm_battery_gauge_alarm_notify: status: 0
  1435. [ 313.675964] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  1436. [ 314.115051] QSEECOM: qseecom_release: data->released == false
  1437. [ 315.358428] msm_battery_gauge_alarm_notify: status: 1
  1438. [ 315.559173] msm_battery_gauge_alarm_notify: status: 0
  1439. [ 315.565216] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  1440. [ 318.144500] QSEECOM: qseecom_release: data->released == false
  1441. [ 319.358489] msm_battery_gauge_alarm_notify: status: 1
  1442. [ 319.537506] msm_battery_gauge_alarm_notify: status: 0
  1443. [ 319.542724] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  1444. [ 323.167236] QSEECOM: qseecom_release: data->released == false
  1445. [ 326.366027] vibrator_enable is stating ...
  1446. [ 326.370910] android_vibrator_off is stating ...
  1447. [ 326.374786] LGE: vibrator_power_set enable=0
  1448. [ 326.374908] vibrator_enable is exting ...
  1449. [ 326.384368] android_vibrator_off is exting ...
  1450. [ 326.753784] vibrator_enable is stating ...
  1451. [ 326.757202] android_vibrator_off is stating ...
  1452. [ 326.761749] LGE: vibrator_power_set enable=0
  1453. [ 326.765991] android_vibrator_off is exting ...
  1454. [ 326.770965] vibrator_enable is exting ...
  1455. [ 327.358551] msm_battery_gauge_alarm_notify: status: 1
  1456. [ 327.444976] msm_battery_gauge_alarm_notify: status: 0
  1457. [ 327.449310] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  1458. [ 328.246856] QSEECOM: qseecom_release: data->released == false
  1459. [ 333.313293] QSEECOM: qseecom_release: data->released == false
  1460. [ 338.394195] QSEECOM: qseecom_release: data->released == false
  1461. [ 343.485198] QSEECOM: qseecom_release: data->released == false
  1462. [ 348.553955] QSEECOM: qseecom_release: data->released == false
  1463. [ 353.623016] QSEECOM: qseecom_release: data->released == false
  1464. [ 357.595489] sensor_common_power_set pwr_mask(7), on(0), sensor(1)
  1465. [ 357.720855] mdp4_dsi_video_wait4vsync timeout ret=0
  1466. [ 357.753082] entering mipi_lgit_lcd_off ..
  1467. [ 357.840942] exting mipi_lgit_lcd_off ..
  1468. [ 357.847595] mipi_dsi_panel_power(off): success
  1469. [ 357.873718] request_suspend_state: sleep (0->3) at 357762918045 (2013-10-31 22:18:32.022563972 UTC)
  1470. [ 357.883422] sensor_common_power_set pwr_mask(6), on(0), sensor(1)
  1471. [ 357.889038] hall_early_suspend:
  1472. [ 357.923919] dhd_set_suspend: force extra Suspend setting
  1473. [ 357.945312] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=2 Listen=10
  1474. [ 357.956634] dtv_pipe is not configured yet
  1475. [ 358.160156] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  1476. [ 358.163879] Unknown PRIVATE command SETSUSPENDMODE 1 - ignored
  1477. [ 358.211090] vibrator_enable is stating ...
  1478. [ 358.214324] android_vibrator_off is stating ...
  1479. [ 358.219024] LGE: vibrator_power_set enable=0
  1480. [ 358.223541] vibrator_enable is exting ...
  1481. [ 358.229370] android_vibrator_off is exting ...
  1482. [ 358.661926] QSEECOM: qseecom_release: data->released == false
  1483. [ 359.992492] pm8058_get_battery_temperature_adc: therm_raw is 1066
  1484. [ 362.583892] Freezing user space processes ... (elapsed 0.09 seconds) done.
  1485. [ 362.693603] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1486. [ 362.749389] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1487. [ 362.756408] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1488. [ 362.762115] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1489. [ 362.783599] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1490. [ 362.789337] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1491. [ 362.799224] PM: suspend of devices complete after 67.535 msecs
  1492. [ 362.812286] PM: late suspend of devices complete after 7.598 msecs
  1493. [ 362.818389] Disabling non-boot CPUs ...
  1494. [ 362.822601] msm_pm_enter
  1495. [ 362.822601] msm_pm_enter: power collapse
  1496. [ 362.822601] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1497. [ 362.822601] msm_pm_enter: return
  1498. [ 362.828613] PM: early resume of devices complete after 5.279 msecs
  1499. [ 362.837768] wakeup wake lock: wlan_wake
  1500. [ 362.842712] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1501. [ 362.849426] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1502. [ 362.855041] bcm432x_sdcc_wlan_slot_status: 34 1
  1503. [ 362.863861] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1504. [ 362.871063] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1505. [ 362.880645] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1506. [ 362.891052] pm8058_get_battery_temperature_adc: therm_raw is 1072
  1507. [ 362.925445] PM: resume of devices complete after 83.927 msecs
  1508. [ 362.936645] Restarting tasks ... done.
  1509. [ 362.977661] suspend: exit suspend, ret = 0 (2013-10-31 22:19:43.103985913 UTC)
  1510. [ 363.688140] QSEECOM: qseecom_release: data->released == false
  1511. [ 363.986541] Freezing user space processes ... (elapsed 0.08 seconds) done.
  1512. [ 364.074615] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1513. [ 364.130065] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1514. [ 364.137237] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1515. [ 364.143066] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1516. [ 364.156250] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1517. [ 364.162933] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1518. [ 364.173004] PM: suspend of devices complete after 60.624 msecs
  1519. [ 364.185974] PM: late suspend of devices complete after 7.597 msecs
  1520. [ 364.192321] Disabling non-boot CPUs ...
  1521. [ 364.196380] msm_pm_enter
  1522. [ 364.196380] msm_pm_enter: power collapse
  1523. [ 364.196380] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1524. [ 364.196380] msm_pm_enter: return
  1525. [ 364.202575] PM: early resume of devices complete after 5.400 msecs
  1526. [ 364.211822] wakeup wake lock: alarm_rtc
  1527. [ 364.216552] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1528. [ 364.223388] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1529. [ 364.228790] bcm432x_sdcc_wlan_slot_status: 34 1
  1530. [ 364.237731] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1531. [ 364.245391] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1532. [ 364.255126] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1533. [ 364.265319] pm8058_get_battery_temperature_adc: therm_raw is 1072
  1534. [ 364.299743] PM: resume of devices complete after 84.351 msecs
  1535. [ 364.311279] Restarting tasks ... done.
  1536. [ 364.349792] suspend: exit suspend, ret = 0 (2013-10-31 22:19:48.101881767 UTC)
  1537. [ 366.734039] Freezing user space processes ... (elapsed 0.07 seconds) done.
  1538. [ 367.062927] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1539. [ 367.120697] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1540. [ 367.127319] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1541. [ 367.133544] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1542. [ 367.146057] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1543. [ 367.153320] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1544. [ 367.165649] PM: suspend of devices complete after 62.743 msecs
  1545. [ 367.178955] PM: late suspend of devices complete after 7.598 msecs
  1546. [ 367.185363] Disabling non-boot CPUs ...
  1547. [ 367.189422] msm_pm_enter
  1548. [ 367.189422] msm_pm_enter: power collapse
  1549. [ 367.189422] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1550. [ 367.189422] msm_pm_enter: return
  1551. [ 367.195587] PM: early resume of devices complete after 5.401 msecs
  1552. [ 367.204864] wakeup wake lock: alarm_rtc
  1553. [ 367.209594] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1554. [ 367.216430] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1555. [ 367.221862] bcm432x_sdcc_wlan_slot_status: 34 1
  1556. [ 367.233459] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1557. [ 367.241271] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1558. [ 367.255950] pm8058_get_battery_temperature_adc: therm_raw is 1072
  1559. [ 367.262207] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1560. [ 367.299041] PM: resume of devices complete after 90.624 msecs
  1561. [ 367.310028] Restarting tasks ... done.
  1562. [ 367.348388] suspend: exit suspend, ret = 0 (2013-10-31 22:19:53.101086841 UTC)
  1563. [ 367.502929] Freezing user space processes ... (elapsed 0.11 seconds) done.
  1564. [ 367.626037] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1565. [ 367.681091] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1566. [ 367.688140] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1567. [ 367.693847] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1568. [ 367.707122] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1569. [ 367.714202] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1570. [ 367.724304] PM: suspend of devices complete after 61.017 msecs
  1571. [ 367.737609] PM: late suspend of devices complete after 7.535 msecs
  1572. [ 367.743377] Disabling non-boot CPUs ...
  1573. [ 367.748229] msm_pm_enter
  1574. [ 367.748229] msm_pm_enter: power collapse
  1575. [ 367.748229] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1576. [ 367.748229] msm_pm_enter: return
  1577. [ 367.753967] PM: early resume of devices complete after 5.064 msecs
  1578. [ 367.762756] wakeup wake lock: alarm_rtc
  1579. [ 367.767913] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1580. [ 367.774414] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1581. [ 367.780273] bcm432x_sdcc_wlan_slot_status: 34 1
  1582. [ 367.791137] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1583. [ 367.798950] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1584. [ 367.813476] pm8058_get_battery_temperature_adc: therm_raw is 1074
  1585. [ 367.820129] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1586. [ 367.856781] PM: resume of devices complete after 89.993 msecs
  1587. [ 367.868133] Restarting tasks ... done.
  1588. [ 367.906738] suspend: exit suspend, ret = 0 (2013-10-31 22:20:44.101818514 UTC)
  1589. [ 368.740478] QSEECOM: qseecom_release: data->released == false
  1590. [ 373.804504] QSEECOM: qseecom_release: data->released == false
  1591. [ 376.268157] Freezing user space processes ...
  1592. [ 376.293334] active wake lock wlan_wake
  1593. [ 376.297149]
  1594. [ 376.298950] Freezing of user space aborted
  1595. [ 376.323272]
  1596. [ 376.327331] Restarting tasks ... done.
  1597. [ 376.353881] suspend: exit suspend, ret = -16 (2013-10-31 22:20:52.548380629 UTC)
  1598. [ 377.369750] Freezing user space processes ... (elapsed 0.06 seconds) done.
  1599. [ 377.683105] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1600. [ 377.741546] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1601. [ 377.748596] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1602. [ 377.754302] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1603. [ 377.767639] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1604. [ 377.774871] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1605. [ 377.787170] PM: suspend of devices complete after 63.293 msecs
  1606. [ 377.800506] PM: late suspend of devices complete after 7.568 msecs
  1607. [ 377.806304] Disabling non-boot CPUs ...
  1608. [ 377.810729] msm_pm_enter
  1609. [ 377.810729] msm_pm_enter: power collapse
  1610. [ 377.810729] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1611. [ 377.810729] msm_pm_enter: return
  1612. [ 377.816894] PM: early resume of devices complete after 5.401 msecs
  1613. [ 377.825561] wakeup wake lock: wlan_wake
  1614. [ 377.830871] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1615. [ 377.837402] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1616. [ 377.843383] bcm432x_sdcc_wlan_slot_status: 34 1
  1617. [ 377.851348] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1618. [ 377.859130] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1619. [ 377.868377] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1620. [ 377.879058] pm8058_get_battery_temperature_adc: therm_raw is 1076
  1621. [ 377.912963] PM: resume of devices complete after 83.285 msecs
  1622. [ 377.924743] Restarting tasks ... done.
  1623. [ 377.963073] suspend: exit suspend, ret = 0 (2013-10-31 22:21:39.101911718 UTC)
  1624. [ 378.845489] QSEECOM: qseecom_release: data->released == false
  1625. [ 379.615905] Freezing user space processes ... (elapsed 0.08 seconds) done.
  1626. [ 379.706573] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1627. [ 379.762176] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1628. [ 379.769226] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1629. [ 379.775482] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1630. [ 379.787933] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1631. [ 379.795043] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1632. [ 379.804748] PM: suspend of devices complete after 60.298 msecs
  1633. [ 379.818115] PM: late suspend of devices complete after 7.598 msecs
  1634. [ 379.824066] Disabling non-boot CPUs ...
  1635. [ 379.828796] msm_pm_enter
  1636. [ 379.828796] msm_pm_enter: power collapse
  1637. [ 379.828796] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1638. [ 379.828796] msm_pm_enter: return
  1639. [ 379.834930] PM: early resume of devices complete after 5.370 msecs
  1640. [ 379.843383] wakeup wake lock: wlan_wake
  1641. [ 379.848724] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1642. [ 379.855224] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1643. [ 379.861053] bcm432x_sdcc_wlan_slot_status: 34 1
  1644. [ 379.869232] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1645. [ 379.877105] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1646. [ 379.886291] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1647. [ 379.896881] pm8058_get_battery_temperature_adc: therm_raw is 1076
  1648. [ 379.930786] PM: resume of devices complete after 83.225 msecs
  1649. [ 379.942321] Restarting tasks ... done.
  1650. [ 379.981018] suspend: exit suspend, ret = 0 (2013-10-31 22:21:43.101942504 UTC)
  1651. [ 380.987640] Freezing user space processes ... (elapsed 0.09 seconds) done.
  1652. [ 381.087341] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1653. [ 381.142822] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1654. [ 381.149841] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1655. [ 381.155578] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1656. [ 381.168853] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1657. [ 381.175689] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1658. [ 381.185913] PM: suspend of devices complete after 60.869 msecs
  1659. [ 381.198883] PM: late suspend of devices complete after 7.597 msecs
  1660. [ 381.205078] Disabling non-boot CPUs ...
  1661. [ 381.209106] msm_pm_enter
  1662. [ 381.209106] msm_pm_enter: power collapse
  1663. [ 381.209106] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1664. [ 381.209106] msm_pm_enter: return
  1665. [ 381.215270] PM: early resume of devices complete after 5.431 msecs
  1666. [ 381.224182] wakeup wake lock: wlan_wake
  1667. [ 381.229125] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1668. [ 381.236145] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1669. [ 381.241546] bcm432x_sdcc_wlan_slot_status: 34 1
  1670. [ 381.250579] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1671. [ 381.257965] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1672. [ 381.267517] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1673. [ 381.277740] pm8058_get_battery_temperature_adc: therm_raw is 1075
  1674. [ 381.312011] PM: resume of devices complete after 84.045 msecs
  1675. [ 381.323547] Restarting tasks ... done.
  1676. [ 381.361297] suspend: exit suspend, ret = 0 (2013-10-31 22:21:45.101027339 UTC)
  1677. [ 382.370391] Freezing user space processes ... (elapsed 0.09 seconds) done.
  1678. [ 382.467559] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1679. [ 382.523284] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1680. [ 382.529937] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1681. [ 382.536071] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1682. [ 382.548553] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1683. [ 382.555664] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1684. [ 382.565521] PM: suspend of devices complete after 60.045 msecs
  1685. [ 382.578887] PM: late suspend of devices complete after 7.627 msecs
  1686. [ 382.585083] Disabling non-boot CPUs ...
  1687. [ 382.589111] msm_pm_enter
  1688. [ 382.589111] msm_pm_enter: power collapse
  1689. [ 382.589111] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1690. [ 382.589111] msm_pm_enter: return
  1691. [ 382.595275] PM: early resume of devices complete after 5.431 msecs
  1692. [ 382.604187] wakeup wake lock: wlan_wake
  1693. [ 382.609161] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1694. [ 382.616149] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1695. [ 382.621582] bcm432x_sdcc_wlan_slot_status: 34 1
  1696. [ 382.630187] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1697. [ 382.638000] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1698. [ 382.647583] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1699. [ 382.657775] pm8058_get_battery_temperature_adc: therm_raw is 1076
  1700. [ 382.692138] PM: resume of devices complete after 84.167 msecs
  1701. [ 382.703247] Restarting tasks ... done.
  1702. [ 382.740753] suspend: exit suspend, ret = 0 (2013-10-31 22:21:48.100356836 UTC)
  1703. [ 383.750915] Freezing user space processes ... (elapsed 0.09 seconds) done.
  1704. [ 383.848236] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1705. [ 383.903686] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1706. [ 383.910736] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1707. [ 383.916442] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1708. [ 383.929290] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1709. [ 383.936401] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1710. [ 383.946197] PM: suspend of devices complete after 60.197 msecs
  1711. [ 383.959564] PM: late suspend of devices complete after 7.566 msecs
  1712. [ 383.965362] Disabling non-boot CPUs ...
  1713. [ 383.970214] msm_pm_enter
  1714. [ 383.970214] msm_pm_enter: power collapse
  1715. [ 383.970214] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1716. [ 383.970214] msm_pm_enter: return
  1717. [ 383.976379] PM: early resume of devices complete after 5.400 msecs
  1718. [ 383.985137] wakeup wake lock: alarm_rtc
  1719. [ 383.990386] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1720. [ 383.996917] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1721. [ 384.002746] bcm432x_sdcc_wlan_slot_status: 34 1
  1722. [ 384.013671] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1723. [ 384.021453] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1724. [ 384.036163] pm8058_get_battery_temperature_adc: therm_raw is 1078
  1725. [ 384.042846] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1726. [ 384.079528] PM: resume of devices complete after 90.297 msecs
  1727. [ 384.090942] Restarting tasks ... done.
  1728. [ 384.129943] suspend: exit suspend, ret = 0 (2013-10-31 22:22:49.102275741 UTC)
  1729. [ 384.184722] QSEECOM: qseecom_release: data->released == false
  1730. [ 384.548309] Freezing user space processes ... (elapsed 0.05 seconds) done.
  1731. [ 384.608581] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1732. [ 384.663238] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1733. [ 384.669860] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1734. [ 384.675994] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1735. [ 384.687103] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1736. [ 384.694091] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1737. [ 384.704162] PM: suspend of devices complete after 58.737 msecs
  1738. [ 384.717803] PM: late suspend of devices complete after 7.626 msecs
  1739. [ 384.723480] Disabling non-boot CPUs ...
  1740. [ 384.735198] msm_pm_enter
  1741. [ 384.735198] msm_pm_enter: power collapse
  1742. [ 384.735198] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1743. [ 384.735198] msm_pm_enter: return
  1744. [ 384.736022] Enabling non-boot CPUs ...
  1745. [ 384.744110] CPU1 is up
  1746. [ 384.751495] PM: early resume of devices complete after 5.244 msecs
  1747. [ 384.760894] wakeup wake lock: alarm_rtc
  1748. [ 384.765808] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1749. [ 384.772521] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1750. [ 384.778045] bcm432x_sdcc_wlan_slot_status: 34 1
  1751. [ 384.787109] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1752. [ 384.794372] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1753. [ 384.803741] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1754. [ 384.813476] pm8058_get_battery_temperature_adc: therm_raw is 1080
  1755. [ 384.847106] PM: resume of devices complete after 82.614 msecs
  1756. [ 384.858123] Restarting tasks ... done.
  1757. [ 384.889831] suspend: exit suspend, ret = 0 (2013-10-31 22:24:33.094743672 UTC)
  1758. [ 387.371032] Freezing user space processes ... (elapsed 0.05 seconds) done.
  1759. [ 387.686462] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1760. [ 387.745330] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1761. [ 387.751953] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1762. [ 387.758087] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1763. [ 387.770538] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1764. [ 387.777770] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1765. [ 387.790100] PM: suspend of devices complete after 62.407 msecs
  1766. [ 387.803436] PM: late suspend of devices complete after 7.568 msecs
  1767. [ 387.809265] Disabling non-boot CPUs ...
  1768. [ 387.814086] msm_pm_enter
  1769. [ 387.814086] msm_pm_enter: power collapse
  1770. [ 387.814086] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1771. [ 387.814086] msm_pm_enter: return
  1772. [ 387.820220] PM: early resume of devices complete after 5.371 msecs
  1773. [ 387.829315] wakeup wake lock: wlan_wake
  1774. [ 387.834136] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1775. [ 387.840667] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1776. [ 387.846649] bcm432x_sdcc_wlan_slot_status: 34 1
  1777. [ 387.854583] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1778. [ 387.862365] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1779. [ 387.871643] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1780. [ 387.882324] pm8058_get_battery_temperature_adc: therm_raw is 1080
  1781. [ 387.916748] PM: resume of devices complete after 83.763 msecs
  1782. [ 387.927886] Restarting tasks ... done.
  1783. [ 387.965820] suspend: exit suspend, ret = 0 (2013-10-31 22:24:47.101024731 UTC)
  1784. [ 389.323455] QSEECOM: qseecom_release: data->released == false
  1785. [ 389.628601] Freezing user space processes ... (elapsed 0.09 seconds) done.
  1786. [ 389.729919] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1787. [ 389.784057] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1788. [ 389.790832] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1789. [ 389.796875] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1790. [ 389.809722] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1791. [ 389.816711] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1792. [ 389.826812] PM: suspend of devices complete after 60.542 msecs
  1793. [ 389.839782] PM: late suspend of devices complete after 7.537 msecs
  1794. [ 389.845886] Disabling non-boot CPUs ...
  1795. [ 389.850097] msm_pm_enter
  1796. [ 389.850097] msm_pm_enter: power collapse
  1797. [ 389.850097] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1798. [ 389.850097] msm_pm_enter: return
  1799. [ 389.856079] PM: early resume of devices complete after 5.248 msecs
  1800. [ 389.865234] wakeup wake lock: wlan_wake
  1801. [ 389.870178] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1802. [ 389.876892] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1803. [ 389.882507] bcm432x_sdcc_wlan_slot_status: 34 1
  1804. [ 389.891296] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1805. [ 389.898681] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1806. [ 389.908477] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1807. [ 389.918487] pm8058_get_battery_temperature_adc: therm_raw is 1080
  1808. [ 389.952728] PM: resume of devices complete after 83.742 msecs
  1809. [ 389.963897] Restarting tasks ... done.
  1810. [ 390.002075] suspend: exit suspend, ret = 0 (2013-10-31 22:24:52.101058524 UTC)
  1811. [ 391.010253] Freezing user space processes ... (elapsed 0.09 seconds) done.
  1812. [ 391.110748] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1813. [ 391.166046] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1814. [ 391.173065] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1815. [ 391.179168] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1816. [ 391.191680] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1817. [ 391.198760] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1818. [ 391.208557] PM: suspend of devices complete after 60.320 msecs
  1819. [ 391.221923] PM: late suspend of devices complete after 7.597 msecs
  1820. [ 391.227691] Disabling non-boot CPUs ...
  1821. [ 391.232543] msm_pm_enter
  1822. [ 391.232543] msm_pm_enter: power collapse
  1823. [ 391.232543] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1824. [ 391.232543] msm_pm_enter: return
  1825. [ 391.238739] PM: early resume of devices complete after 5.400 msecs
  1826. [ 391.247344] wakeup wake lock: event9-559
  1827. [ 391.252929] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1828. [ 391.259429] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1829. [ 391.265258] bcm432x_sdcc_wlan_slot_status: 34 1
  1830. [ 391.276214] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1831. [ 391.284149] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1832. [ 391.298400] pm8058_get_battery_temperature_adc: therm_raw is 1081
  1833. [ 391.305053] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1834. [ 391.341735] PM: resume of devices complete after 89.991 msecs
  1835. [ 391.353363] Restarting tasks ... done.
  1836. [ 391.391601] suspend: exit suspend, ret = 0 (2013-10-31 22:25:26.101665621 UTC)
  1837. [ 391.422454] sensor_common_power_set pwr_mask(6), on(1), sensor(1)
  1838. [ 391.479217] [APDS9900] [apds9900_check_reliablility 932] ### apds9900_check_reliablility fail!! reinit device !! control reg(0),buf(20)
  1839. [ 391.552734] request_suspend_state: wakeup (3->0) at 391434987996 (2013-10-31 22:25:26.262694151 UTC)
  1840. [ 391.640625] hall_late_resume:
  1841. [ 391.640686] sensor_common_power_set pwr_mask(7), on(1), sensor(1)
  1842. [ 391.653930] mdp4_csc_config: Block type 10 isn't supported by CSC.
  1843. [ 391.653991] mdp4_csc_config: Block type 8 isn't supported by CSC.
  1844. [ 391.663391] entering mipi_lgit_lcd_on ..
  1845. [ 391.798034] exting mipi_lgit_lcd_on ..
  1846. [ 391.880004] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 85330000
  1847. [ 391.888397] mdp4_overlay_mdp_perf_upd mdp bw is changed [1] from 4 to 2
  1848. [ 392.034454] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  1849. [ 392.038696] Unknown PRIVATE command SETSUSPENDMODE 0 - ignored
  1850. [ 394.399383] QSEECOM: qseecom_release: data->released == false
  1851. [ 395.456146] msm_device_put:device speaker_stereo_rx_playback set 0
  1852. [ 395.461456] msm_device_put:device handset_record_tx set 0
  1853. [ 395.481079] [pcm_out.c:pcm_out_open] open
  1854. [ 395.495727] [pcm_out.c:pcm_out_open] open session id[1]
  1855. [ 395.529998] msm_device_put:device speaker_stereo_rx_playback set 1
  1856. [ 395.535339] msm_device_put:device freq =48000
  1857. [ 395.568572] afe_open: 0 48000
  1858. [ 395.594329] AMP ON: voc_codec 7 for SPEAKER_PLAYBACK_RX
  1859. [ 395.621856] pcm_out_ioctl: AUDIO_START
  1860. [ 396.489257] vibrator_enable is stating ...
  1861. [ 396.492645] android_vibrator_off is stating ...
  1862. [ 396.497192] LGE: vibrator_power_set enable=0
  1863. [ 396.501525] vibrator_enable is exting ...
  1864. [ 396.505798] android_vibrator_off is exting ...
  1865. [ 398.704986] msm_device_put:device speaker_stereo_rx_playback set 0
  1866. [ 398.711334] AMP OFF: voc_codec 0
  1867. [ 398.730621] msm_device_put:device handset_record_tx set 0
  1868. [ 398.735198] [pcm_out.c:pcm_out_release] release session id[1]
  1869. [ 399.471923] QSEECOM: qseecom_release: data->released == false
  1870. [ 402.082031] vibrator_enable is stating ...
  1871. [ 402.085388] android_vibrator_off is stating ...
  1872. [ 402.090362] LGE: vibrator_power_set enable=0
  1873. [ 402.094299] android_vibrator_off is exting ...
  1874. [ 402.097473] vibrator_enable is exting ...
  1875. [ 404.532501] QSEECOM: qseecom_release: data->released == false
  1876. [ 409.463348] QSEECOM: qseecom_release: data->released == false
  1877. [ 414.543914] QSEECOM: qseecom_release: data->released == false
  1878. [ 419.610076] QSEECOM: qseecom_release: data->released == false
  1879. [ 424.681945] QSEECOM: qseecom_release: data->released == false
  1880. [ 429.745239] QSEECOM: qseecom_release: data->released == false
  1881. [ 434.825134] QSEECOM: qseecom_release: data->released == false
  1882. [ 439.893920] QSEECOM: qseecom_release: data->released == false
  1883. [ 444.963714] QSEECOM: qseecom_release: data->released == false
  1884. [ 450.044189] QSEECOM: qseecom_release: data->released == false
  1885. [ 451.175537] pm8058_get_battery_temperature_adc: therm_raw is 1076
  1886. [ 455.122772] QSEECOM: qseecom_release: data->released == false
  1887. [ 459.193267] QSEECOM: qseecom_release: data->released == false
  1888. [ 461.825408] sensor_common_power_set pwr_mask(7), on(0), sensor(1)
  1889. [ 462.078277] mdp4_dsi_video_wait4vsync timeout ret=0
  1890. [ 462.108337] entering mipi_lgit_lcd_off ..
  1891. [ 462.198242] exting mipi_lgit_lcd_off ..
  1892. [ 462.204376] mipi_dsi_panel_power(off): success
  1893. [ 462.230346] request_suspend_state: sleep (0->3) at 462112153846 (2013-10-31 22:26:36.939860001 UTC)
  1894. [ 462.238922] sensor_common_power_set pwr_mask(6), on(0), sensor(1)
  1895. [ 462.244567] hall_early_suspend:
  1896. [ 462.278228] dhd_set_suspend: force extra Suspend setting
  1897. [ 462.293518] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=2 Listen=10
  1898. [ 462.305725] dtv_pipe is not configured yet
  1899. [ 462.327362] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  1900. [ 462.331268] Unknown PRIVATE command SETSUSPENDMODE 1 - ignored
  1901. [ 462.349334] vibrator_enable is stating ...
  1902. [ 462.352569] android_vibrator_off is stating ...
  1903. [ 462.357269] LGE: vibrator_power_set enable=0
  1904. [ 462.361816] vibrator_enable is exting ...
  1905. [ 462.366943] android_vibrator_off is exting ...
  1906. [ 464.259429] QSEECOM: qseecom_release: data->released == false
  1907. [ 466.778961] Freezing user space processes ...
  1908. [ 466.824432] active wake lock alarm, time left 500
  1909. [ 466.834533]
  1910. [ 466.835510] Freezing of user space aborted
  1911. [ 466.848724]
  1912. [ 466.849700] Restarting tasks ... done.
  1913. [ 466.887695] suspend: exit suspend, ret = -16 (2013-10-31 22:26:41.597178100 UTC)
  1914. [ 467.346740] Freezing user space processes ... (elapsed 0.03 seconds) done.
  1915. [ 467.638244] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1916. [ 467.666656] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1917. [ 467.672790] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1918. [ 467.678924] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1919. [ 467.689849] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1920. [ 467.695831] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1921. [ 467.706573] PM: suspend of devices complete after 43.121 msecs
  1922. [ 467.717498] PM: late suspend of devices complete after 5.523 msecs
  1923. [ 467.723571] Disabling non-boot CPUs ...
  1924. [ 467.734466] msm_pm_enter
  1925. [ 467.734466] msm_pm_enter: power collapse
  1926. [ 467.734466] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1927. [ 467.734466] msm_pm_enter: return
  1928. [ 467.735168] Enabling non-boot CPUs ...
  1929. [ 467.745361] CPU1 is up
  1930. [ 467.751159] PM: early resume of devices complete after 3.966 msecs
  1931. [ 467.759826] wakeup wake lock: alarm_rtc
  1932. [ 467.764099] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1933. [ 467.770141] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1934. [ 467.775939] bcm432x_sdcc_wlan_slot_status: 34 1
  1935. [ 467.783630] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1936. [ 467.791229] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1937. [ 467.800109] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1938. [ 467.810394] pm8058_get_battery_temperature_adc: therm_raw is 1079
  1939. [ 467.843109] PM: resume of devices complete after 79.776 msecs
  1940. [ 467.852935] Restarting tasks ... done.
  1941. [ 467.869110] suspend: exit suspend, ret = 0 (2013-10-31 22:27:07.077273454 UTC)
  1942. [ 469.321929] QSEECOM: qseecom_release: data->released == false
  1943. [ 470.082946] Freezing user space processes ... (elapsed 0.09 seconds) done.
  1944. [ 470.181854] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1945. [ 470.237457] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  1946. [ 470.244110] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  1947. [ 470.250244] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  1948. [ 470.262725] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  1949. [ 470.269805] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  1950. [ 470.280059] PM: suspend of devices complete after 60.392 msecs
  1951. [ 470.293029] PM: late suspend of devices complete after 7.629 msecs
  1952. [ 470.299194] Disabling non-boot CPUs ...
  1953. [ 470.303222] msm_pm_enter
  1954. [ 470.303222] msm_pm_enter: power collapse
  1955. [ 470.303222] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1956. [ 470.303222] msm_pm_enter: return
  1957. [ 470.309387] PM: early resume of devices complete after 5.431 msecs
  1958. [ 470.318420] wakeup wake lock: event9-559
  1959. [ 470.323608] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  1960. [ 470.330535] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  1961. [ 470.335968] bcm432x_sdcc_wlan_slot_status: 34 1
  1962. [ 470.347717] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  1963. [ 470.355102] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  1964. [ 470.370117] pm8058_get_battery_temperature_adc: therm_raw is 1085
  1965. [ 470.376373] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  1966. [ 470.413482] PM: resume of devices complete after 91.065 msecs
  1967. [ 470.424468] Restarting tasks ... done.
  1968. [ 470.470642] suspend: exit suspend, ret = 0 (2013-10-31 22:29:09.108957131 UTC)
  1969. [ 470.502990] sensor_common_power_set pwr_mask(6), on(1), sensor(1)
  1970. [ 470.562469] [APDS9900] [apds9900_check_reliablility 932] ### apds9900_check_reliablility fail!! reinit device !! control reg(0),buf(20)
  1971. [ 470.624298] request_suspend_state: wakeup (3->0) at 470505177818 (2013-10-31 22:29:09.262482712 UTC)
  1972. [ 470.711975] hall_late_resume:
  1973. [ 470.712005] sensor_common_power_set pwr_mask(7), on(1), sensor(1)
  1974. [ 470.725067] mdp4_csc_config: Block type 10 isn't supported by CSC.
  1975. [ 470.725128] mdp4_csc_config: Block type 8 isn't supported by CSC.
  1976. [ 470.733428] entering mipi_lgit_lcd_on ..
  1977. [ 470.859802] exting mipi_lgit_lcd_on ..
  1978. [ 470.979766] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 85330000
  1979. [ 470.987091] mdp4_overlay_mdp_perf_upd mdp bw is changed [1] from 4 to 2
  1980. [ 471.011230] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  1981. [ 471.014984] Unknown PRIVATE command SETSUSPENDMODE 0 - ignored
  1982. [ 474.976623] QSEECOM: qseecom_release: data->released == false
  1983. [ 480.052093] QSEECOM: qseecom_release: data->released == false
  1984. [ 485.114074] QSEECOM: qseecom_release: data->released == false
  1985. [ 489.144744] QSEECOM: qseecom_release: data->released == false
  1986. [ 494.214385] QSEECOM: qseecom_release: data->released == false
  1987. [ 499.274871] QSEECOM: qseecom_release: data->released == false
  1988. [ 501.597961] sensor_common_power_set pwr_mask(7), on(0), sensor(1)
  1989. [ 501.739685] mdp4_dsi_video_wait4vsync timeout ret=0
  1990. [ 501.769775] entering mipi_lgit_lcd_off ..
  1991. [ 501.859863] exting mipi_lgit_lcd_off ..
  1992. [ 501.866271] mipi_dsi_panel_power(off): success
  1993. [ 501.891540] request_suspend_state: sleep (0->3) at 501771942299 (2013-10-31 22:29:40.529277694 UTC)
  1994. [ 501.901519] sensor_common_power_set pwr_mask(6), on(0), sensor(1)
  1995. [ 501.907470] hall_early_suspend:
  1996. [ 501.939666] dhd_set_suspend: force extra Suspend setting
  1997. [ 501.954162] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=2 Listen=10
  1998. [ 501.971771] dtv_pipe is not configured yet
  1999. [ 501.998626] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  2000. [ 502.002655] Unknown PRIVATE command SETSUSPENDMODE 1 - ignored
  2001. [ 502.011962] vibrator_enable is stating ...
  2002. [ 502.015258] android_vibrator_off is stating ...
  2003. [ 502.019836] LGE: vibrator_power_set enable=0
  2004. [ 502.024200] android_vibrator_off is exting ...
  2005. [ 502.028656] vibrator_enable is exting ...
  2006. [ 504.341400] QSEECOM: qseecom_release: data->released == false
  2007. [ 506.571716] Freezing user space processes ... (elapsed 0.10 seconds) done.
  2008. [ 506.682434] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2009. [ 506.737823] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  2010. [ 506.744842] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  2011. [ 506.750671] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  2012. [ 506.763793] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  2013. [ 506.769500] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  2014. [ 506.779449] PM: suspend of devices complete after 59.295 msecs
  2015. [ 506.792449] PM: late suspend of devices complete after 7.568 msecs
  2016. [ 506.798553] Disabling non-boot CPUs ...
  2017. [ 506.802947] msm_pm_enter
  2018. [ 506.802947] msm_pm_enter: power collapse
  2019. [ 506.802947] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2020. [ 506.802947] msm_pm_enter: return
  2021. [ 506.808990] PM: early resume of devices complete after 5.279 msecs
  2022. [ 506.818023] wakeup wake lock: wlan_wake
  2023. [ 506.822967] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  2024. [ 506.829895] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  2025. [ 506.835296] bcm432x_sdcc_wlan_slot_status: 34 1
  2026. [ 506.844329] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  2027. [ 506.851776] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  2028. [ 506.864807] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  2029. [ 506.871643] pm8058_get_battery_temperature_adc: therm_raw is 1083
  2030. [ 506.908416] PM: resume of devices complete after 86.641 msecs
  2031. [ 506.919525] Restarting tasks ... done.
  2032. [ 506.961456] suspend: exit suspend, ret = 0 (2013-10-31 22:29:49.104778491 UTC)
  2033. [ 507.972564] Freezing user space processes ... (elapsed 0.09 seconds) done.
  2034. [ 508.073089] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2035. [ 508.128784] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  2036. [ 508.135375] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  2037. [ 508.141723] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  2038. [ 508.154174] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  2039. [ 508.161285] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  2040. [ 508.171081] PM: suspend of devices complete after 60.197 msecs
  2041. [ 508.184448] PM: late suspend of devices complete after 7.597 msecs
  2042. [ 508.190216] Disabling non-boot CPUs ...
  2043. [ 508.195098] msm_pm_enter
  2044. [ 508.195098] msm_pm_enter: power collapse
  2045. [ 508.195098] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2046. [ 508.195098] msm_pm_enter: return
  2047. [ 508.201263] PM: early resume of devices complete after 5.400 msecs
  2048. [ 508.210174] wakeup wake lock: wlan_wake
  2049. [ 508.215118] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  2050. [ 508.221710] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  2051. [ 508.227569] bcm432x_sdcc_wlan_slot_status: 34 1
  2052. [ 508.235748] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  2053. [ 508.243530] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  2054. [ 508.252807] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  2055. [ 508.263427] pm8058_get_battery_temperature_adc: therm_raw is 1084
  2056. [ 508.297729] PM: resume of devices complete after 83.740 msecs
  2057. [ 508.308807] Restarting tasks ... done.
  2058. [ 508.347076] suspend: exit suspend, ret = 0 (2013-10-31 22:29:55.101088618 UTC)
  2059. [ 509.353698] Freezing user space processes ... (elapsed 0.08 seconds) done.
  2060. [ 509.474487] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2061. [ 509.528839] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  2062. [ 509.535888] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  2063. [ 509.541595] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  2064. [ 509.554840] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  2065. [ 509.562072] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  2066. [ 509.571807] PM: suspend of devices complete after 60.533 msecs
  2067. [ 509.585174] PM: late suspend of devices complete after 7.627 msecs
  2068. [ 509.590972] Disabling non-boot CPUs ...
  2069. [ 509.595428] msm_pm_enter
  2070. [ 509.595428] msm_pm_enter: power collapse
  2071. [ 509.595428] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2072. [ 509.595428] msm_pm_enter: return
  2073. [ 509.601593] PM: early resume of devices complete after 5.431 msecs
  2074. [ 509.610351] wakeup wake lock: alarm_rtc
  2075. [ 509.615722] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  2076. [ 509.622131] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  2077. [ 509.627960] bcm432x_sdcc_wlan_slot_status: 34 1
  2078. [ 509.638916] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  2079. [ 509.646697] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  2080. [ 509.661499] pm8058_get_battery_temperature_adc: therm_raw is 1086
  2081. [ 509.668243] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  2082. [ 509.704986] PM: resume of devices complete after 90.449 msecs
  2083. [ 509.716491] Restarting tasks ... done.
  2084. [ 509.786590] suspend: exit suspend, ret = 0 (2013-10-31 22:30:49.133473307 UTC)
  2085. [ 509.813629] QSEECOM: qseecom_release: data->released == false
  2086. [ 514.722137] Freezing user space processes ... (elapsed 0.05 seconds) done.
  2087. [ 515.032104] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2088. [ 515.089599] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  2089. [ 515.096740] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  2090. [ 515.102874] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  2091. [ 515.115386] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  2092. [ 515.121765] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  2093. [ 515.130737] PM: suspend of devices complete after 58.929 msecs
  2094. [ 515.144287] PM: late suspend of devices complete after 7.568 msecs
  2095. [ 515.149963] Disabling non-boot CPUs ...
  2096. [ 515.155059] msm_pm_enter
  2097. [ 515.155059] msm_pm_enter: power collapse
  2098. [ 515.155059] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2099. [ 515.155059] msm_pm_enter: return
  2100. [ 515.161041] PM: early resume of devices complete after 5.249 msecs
  2101. [ 515.169799] wakeup wake lock: event9-559
  2102. [ 515.175354] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  2103. [ 515.181884] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  2104. [ 515.187713] bcm432x_sdcc_wlan_slot_status: 34 1
  2105. [ 515.198669] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  2106. [ 515.206451] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  2107. [ 515.221008] pm8058_get_battery_temperature_adc: therm_raw is 1087
  2108. [ 515.227722] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  2109. [ 515.264404] PM: resume of devices complete after 90.193 msecs
  2110. [ 515.276000] Restarting tasks ... done.
  2111. [ 515.317474] suspend: exit suspend, ret = 0 (2013-10-31 22:31:27.105079939 UTC)
  2112. [ 515.340637] active wake lock KeyEvents
  2113. [ 515.343902] active wake lock mmc3_detect
  2114. [ 515.348205] active wake lock mmc2_detect
  2115. [ 515.351684] active wake lock alarm, time left 492
  2116. [ 515.419464] QSEECOM: qseecom_release: data->released == false
  2117. [ 515.448822] sensor_common_power_set pwr_mask(6), on(1), sensor(1)
  2118. [ 515.503143] [APDS9900] [apds9900_check_reliablility 932] ### apds9900_check_reliablility fail!! reinit device !! control reg(0),buf(20)
  2119. [ 515.575073] request_suspend_state: wakeup (3->0) at 515453346863 (2013-10-31 22:31:27.362532225 UTC)
  2120. [ 515.624908] hall_late_resume:
  2121. [ 515.624969] sensor_common_power_set pwr_mask(7), on(1), sensor(1)
  2122. [ 515.638092] mdp4_csc_config: Block type 10 isn't supported by CSC.
  2123. [ 515.638122] mdp4_csc_config: Block type 8 isn't supported by CSC.
  2124. [ 515.652740] entering mipi_lgit_lcd_on ..
  2125. [ 515.782745] exting mipi_lgit_lcd_on ..
  2126. [ 515.903411] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  2127. [ 515.907226] Unknown PRIVATE command SETSUSPENDMODE 0 - ignored
  2128. [ 515.947296] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 85330000
  2129. [ 515.959899] mdp4_overlay_mdp_perf_upd mdp bw is changed [1] from 4 to 2
  2130. [ 520.023071] [pcm_out.c:pcm_out_open] open
  2131. [ 520.037719] [pcm_out.c:pcm_out_open] open session id[1]
  2132. [ 520.072082] msm_device_put:device speaker_stereo_rx_playback set 1
  2133. [ 520.077392] msm_device_put:device freq =48000
  2134. [ 520.112518] afe_open: 0 48000
  2135. [ 520.138366] AMP ON: voc_codec 7 for SPEAKER_PLAYBACK_RX
  2136. [ 520.166961] pcm_out_ioctl: AUDIO_START
  2137. [ 520.465637] QSEECOM: qseecom_release: data->released == false
  2138. [ 523.220550] msm_device_put:device speaker_stereo_rx_playback set 0
  2139. [ 523.226867] AMP OFF: voc_codec 0
  2140. [ 523.249664] msm_device_put:device handset_record_tx set 0
  2141. [ 523.255218] [pcm_out.c:pcm_out_release] release session id[1]
  2142. [ 525.534301] QSEECOM: qseecom_release: data->released == false
  2143. [ 530.613952] QSEECOM: qseecom_release: data->released == false
  2144. [ 535.676849] QSEECOM: qseecom_release: data->released == false
  2145. [ 540.436523] QSEECOM: qseecom_release: data->released == false
  2146. [ 545.512664] QSEECOM: qseecom_release: data->released == false
  2147. [ 550.577667] QSEECOM: qseecom_release: data->released == false
  2148. [ 555.646911] QSEECOM: qseecom_release: data->released == false
  2149. [ 560.707366] QSEECOM: qseecom_release: data->released == false
  2150. [ 565.777893] QSEECOM: qseecom_release: data->released == false
  2151. [ 570.856475] QSEECOM: qseecom_release: data->released == false
  2152. [ 575.337707] pm8058_get_battery_temperature_adc: therm_raw is 1081
  2153. [ 575.918029] QSEECOM: qseecom_release: data->released == false
  2154. [ 580.625244] sensor_common_power_set pwr_mask(7), on(0), sensor(1)
  2155. [ 580.773284] mdp4_dsi_video_wait4vsync timeout ret=0
  2156. [ 580.803161] entering mipi_lgit_lcd_off ..
  2157. [ 580.892700] exting mipi_lgit_lcd_off ..
  2158. [ 580.898529] mipi_dsi_panel_power(off): success
  2159. [ 580.923217] request_suspend_state: sleep (0->3) at 580801091022 (2013-10-31 22:32:32.710245867 UTC)
  2160. [ 580.932281] sensor_common_power_set pwr_mask(6), on(0), sensor(1)
  2161. [ 580.937866] hall_early_suspend:
  2162. [ 580.970672] QSEECOM: qseecom_release: data->released == false
  2163. [ 580.982238] dhd_set_suspend: force extra Suspend setting
  2164. [ 580.996948] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=2 Listen=10
  2165. [ 581.017333] dtv_pipe is not configured yet
  2166. [ 581.029113] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  2167. [ 581.033081] Unknown PRIVATE command SETSUSPENDMODE 1 - ignored
  2168. [ 581.070373] vibrator_enable is stating ...
  2169. [ 581.073669] android_vibrator_off is stating ...
  2170. [ 581.078247] LGE: vibrator_power_set enable=0
  2171. [ 581.083435] vibrator_enable is exting ...
  2172. [ 581.087829] android_vibrator_off is exting ...
  2173. [ 585.614074] Freezing user space processes ...
  2174. [ 585.659210] active wake lock alarm, time left 497
  2175. [ 585.669128]
  2176. [ 585.670074] Freezing of user space aborted
  2177. [ 585.683837]
  2178. [ 585.684844] Restarting tasks ... done.
  2179. [ 585.730224] suspend: exit suspend, ret = -16 (2013-10-31 22:32:37.517252688 UTC)
  2180. [ 585.997497] QSEECOM: qseecom_release: data->released == false
  2181. [ 586.047302] Freezing user space processes ... (elapsed 0.02 seconds) done.
  2182. [ 586.322174] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2183. [ 586.350646] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  2184. [ 586.356719] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  2185. [ 586.363281] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  2186. [ 586.373504] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  2187. [ 586.379882] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  2188. [ 586.390045] PM: suspend of devices complete after 42.663 msecs
  2189. [ 586.401336] PM: late suspend of devices complete after 5.523 msecs
  2190. [ 586.407440] Disabling non-boot CPUs ...
  2191. [ 586.418121] msm_pm_enter
  2192. [ 586.418121] msm_pm_enter: power collapse
  2193. [ 586.418121] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2194. [ 586.418121] msm_pm_enter: return
  2195. [ 586.418823] Enabling non-boot CPUs ...
  2196. [ 586.428924] CPU1 is up
  2197. [ 586.435058] PM: early resume of devices complete after 3.936 msecs
  2198. [ 586.443389] wakeup wake lock: alarm_rtc
  2199. [ 586.447662] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  2200. [ 586.454071] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  2201. [ 586.459838] bcm432x_sdcc_wlan_slot_status: 34 1
  2202. [ 586.467437] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  2203. [ 586.474670] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  2204. [ 586.483917] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  2205. [ 586.494201] pm8058_get_battery_temperature_adc: therm_raw is 1080
  2206. [ 586.526519] PM: resume of devices complete after 79.654 msecs
  2207. [ 586.536712] Restarting tasks ... done.
  2208. [ 586.560791] suspend: exit suspend, ret = 0 (2013-10-31 22:32:44.085507308 UTC)
  2209. [ 586.681396] Freezing user space processes ... (elapsed 0.01 seconds) done.
  2210. [ 586.704376] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2211. [ 586.733612] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  2212. [ 586.739562] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  2213. [ 586.745422] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  2214. [ 586.755737] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  2215. [ 586.760986] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  2216. [ 586.768798] PM: suspend of devices complete after 39.682 msecs
  2217. [ 586.776123] PM: late suspend of devices complete after 2.348 msecs
  2218. [ 586.781463] Disabling non-boot CPUs ...
  2219. [ 586.788421] msm_pm_enter
  2220. [ 586.788421] msm_pm_enter: power collapse
  2221. [ 586.788421] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2222. [ 586.788421] msm_pm_enter: return
  2223. [ 586.788635] Enabling non-boot CPUs ...
  2224. [ 586.794921] CPU1 is up
  2225. [ 586.797943] PM: early resume of devices complete after 1.586 msecs
  2226. [ 586.804504] wakeup wake lock: alarm_rtc
  2227. [ 586.808044] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  2228. [ 586.813903] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  2229. [ 586.819488] bcm432x_sdcc_wlan_slot_status: 34 1
  2230. [ 586.825714] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  2231. [ 586.832489] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  2232. [ 586.840026] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  2233. [ 586.849029] pm8058_get_battery_temperature_adc: therm_raw is 1079
  2234. [ 586.875396] PM: resume of devices complete after 67.790 msecs
  2235. [ 586.881835] Restarting tasks ... done.
  2236. [ 586.890472] suspend: exit suspend, ret = 0 (2013-10-31 22:33:03.064617965 UTC)
  2237. [ 587.074707] Freezing user space processes ... (elapsed 0.03 seconds) done.
  2238. [ 587.114440] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2239. [ 587.143493] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  2240. [ 587.149536] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  2241. [ 587.155212] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  2242. [ 587.163421] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  2243. [ 587.168670] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  2244. [ 587.177001] PM: suspend of devices complete after 37.977 msecs
  2245. [ 587.184295] PM: late suspend of devices complete after 2.409 msecs
  2246. [ 587.189636] Disabling non-boot CPUs ...
  2247. [ 587.196563] msm_pm_enter
  2248. [ 587.196563] msm_pm_enter: power collapse
  2249. [ 587.196563] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2250. [ 587.196563] msm_pm_enter: return
  2251. [ 587.196807] Enabling non-boot CPUs ...
  2252. [ 587.203002] CPU1 is up
  2253. [ 587.206024] PM: early resume of devices complete after 1.586 msecs
  2254. [ 587.212402] wakeup wake lock: wlan_wake
  2255. [ 587.216003] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  2256. [ 587.221710] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  2257. [ 587.227478] bcm432x_sdcc_wlan_slot_status: 34 1
  2258. [ 587.233581] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  2259. [ 587.240325] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  2260. [ 587.247619] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  2261. [ 587.256927] pm8058_get_battery_temperature_adc: therm_raw is 1079
  2262. [ 587.281188] PM: resume of devices complete after 65.594 msecs
  2263. [ 587.287719] Restarting tasks ... done.
  2264. [ 587.299194] suspend: exit suspend, ret = 0 (2013-10-31 22:33:03.473028968 UTC)
  2265. [ 588.807495] Freezing user space processes ... (elapsed 0.09 seconds) done.
  2266. [ 588.906372] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2267. [ 588.961425] power_set_for_8058_l15: prox/als power line: 108, onoff(0)
  2268. [ 588.968475] sensor_common_power_set pwr_mask(6), on(0), sensor(2)
  2269. [ 588.974273] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
  2270. [ 588.987457] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
  2271. [ 588.994140] msmsdcc_runtime_suspend() - host->mmc->index=3 - End
  2272. [ 589.004272] PM: suspend of devices complete after 60.571 msecs
  2273. [ 589.017150] PM: late suspend of devices complete after 7.537 msecs
  2274. [ 589.023498] Disabling non-boot CPUs ...
  2275. [ 589.027557] msm_pm_enter
  2276. [ 589.027557] msm_pm_enter: power collapse
  2277. [ 589.027557] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2278. [ 589.027557] msm_pm_enter: return
  2279. [ 589.033691] PM: early resume of devices complete after 5.401 msecs
  2280. [ 589.042297] wakeup wake lock: event9-559
  2281. [ 589.047454] msmsdcc_runtime_resume() - host->mmc->index=3 - Start
  2282. [ 589.054290] msmsdcc_runtime_resume() - host->mmc->index=3 - End
  2283. [ 589.060119] bcm432x_sdcc_wlan_slot_status: 34 1
  2284. [ 589.071014] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
  2285. [ 589.078430] sensor_common_power_set pwr_mask(4), on(1), sensor(2)
  2286. [ 589.093505] pm8058_get_battery_temperature_adc: therm_raw is 1080
  2287. [ 589.100158] power_set_for_8058_l15: prox/als power line: 108, onoff(1)
  2288. [ 589.136810] PM: resume of devices complete after 90.484 msecs
  2289. [ 589.148162] Restarting tasks ... done.
  2290. [ 589.187927] suspend: exit suspend, ret = 0 (2013-10-31 22:33:07.103101884 UTC)
  2291. [ 589.225891] sensor_common_power_set pwr_mask(6), on(1), sensor(1)
  2292. [ 589.247985] [APDS9900] [apds9900_check_reliablility 932] ### apds9900_check_reliablility fail!! reinit device !! control reg(0),buf(20)
  2293. [ 589.309295] request_suspend_state: wakeup (3->0) at 589185846448 (2013-10-31 22:33:07.224358710 UTC)
  2294. [ 589.395935] hall_late_resume:
  2295. [ 589.395996] sensor_common_power_set pwr_mask(7), on(1), sensor(1)
  2296. [ 589.409484] mdp4_csc_config: Block type 10 isn't supported by CSC.
  2297. [ 589.409515] mdp4_csc_config: Block type 8 isn't supported by CSC.
  2298. [ 589.418426] entering mipi_lgit_lcd_on ..
  2299. [ 589.554168] exting mipi_lgit_lcd_on ..
  2300. [ 589.606048] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 85330000
  2301. [ 589.612640] mdp4_overlay_mdp_perf_upd mdp bw is changed [1] from 4 to 2
  2302. [ 589.745452] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  2303. [ 589.749633] Unknown PRIVATE command SETSUSPENDMODE 0 - ignored
  2304. [ 589.953369] hrtimer: interrupt took 91513 ns
  2305. [ 591.059509] QSEECOM: qseecom_release: data->released == false
  2306. [ 591.917541] [pcm_out.c:pcm_out_open] open
  2307. [ 591.932159] [pcm_out.c:pcm_out_open] open session id[1]
  2308. [ 591.966552] msm_device_put:device speaker_stereo_rx_playback set 1
  2309. [ 591.971862] msm_device_put:device freq =48000
  2310. [ 592.004577] afe_open: 0 48000
  2311. [ 592.030914] AMP ON: voc_codec 7 for SPEAKER_PLAYBACK_RX
  2312. [ 592.060058] pcm_out_ioctl: AUDIO_START
  2313. [ 595.112152] msm_device_put:device speaker_stereo_rx_playback set 0
  2314. [ 595.117614] AMP OFF: voc_codec 0
  2315. [ 595.136322] msm_device_put:device handset_record_tx set 0
  2316. [ 595.140899] [pcm_out.c:pcm_out_release] release session id[1]
  2317. [ 596.105224] QSEECOM: qseecom_release: data->released == false
  2318. [ 601.189880] QSEECOM: qseecom_release: data->released == false
  2319. [ 605.621276] QSEECOM: qseecom_release: data->released == false
  2320. [ 609.274780] send sigkill to 1988 (android.vending), adj 15, size 7812
  2321. [ 610.668853] QSEECOM: qseecom_release: data->released == false
  2322. [ 615.745697] QSEECOM: qseecom_release: data->released == false
  2323. [ 620.813842] QSEECOM: qseecom_release: data->released == false
  2324. [ 625.845397] QSEECOM: qseecom_release: data->released == false
  2325. [ 630.917449] QSEECOM: qseecom_release: data->released == false
  2326. [ 635.980224] QSEECOM: qseecom_release: data->released == false
  2327. [ 641.047637] QSEECOM: qseecom_release: data->released == false
  2328. [ 646.113494] QSEECOM: qseecom_release: data->released == false
  2329. [ 649.259887] pm8058_get_battery_temperature_adc: therm_raw is 1068
  2330. [ 650.188964] QSEECOM: qseecom_release: data->released == false
  2331. [ 655.269989] QSEECOM: qseecom_release: data->released == false
  2332. [ 660.345153] QSEECOM: qseecom_release: data->released == false
  2333. [ 665.409759] QSEECOM: qseecom_release: data->released == false
  2334. [ 670.697204] QSEECOM: qseecom_release: data->released == false
  2335. [ 675.768188] QSEECOM: qseecom_release: data->released == false
  2336. [ 680.837860] QSEECOM: qseecom_release: data->released == false
  2337. [ 685.901702] QSEECOM: qseecom_release: data->released == false
  2338. [ 690.968688] QSEECOM: qseecom_release: data->released == false
  2339. [ 696.032470] QSEECOM: qseecom_release: data->released == false
  2340. [ 701.108245] QSEECOM: qseecom_release: data->released == false
  2341. [ 706.136383] QSEECOM: qseecom_release: data->released == false
  2342. [ 709.255950] pm8058_get_battery_temperature_adc: therm_raw is 1064
  2343. [ 710.206695] QSEECOM: qseecom_release: data->released == false
  2344. [ 715.243011] QSEECOM: qseecom_release: data->released == false
  2345. [ 719.716033] msm_battery_gauge_alarm_notify: status: 1
  2346. [ 719.762237] msm_battery_gauge_alarm_notify: status: 0
  2347. [ 719.766693] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2348. [ 720.323150] QSEECOM: qseecom_release: data->released == false
  2349. [ 725.387603] QSEECOM: qseecom_release: data->released == false
  2350. [ 730.458404] QSEECOM: qseecom_release: data->released == false
  2351. [ 735.785583] QSEECOM: qseecom_release: data->released == false
  2352. [ 740.820159] QSEECOM: qseecom_release: data->released == false
  2353. [ 745.885925] QSEECOM: qseecom_release: data->released == false
  2354. [ 750.968322] QSEECOM: qseecom_release: data->released == false
  2355. [ 756.029937] QSEECOM: qseecom_release: data->released == false
  2356. [ 759.482604] init: untracked pid 3421 exited
  2357. [ 760.499023] QSEECOM: qseecom_release: data->released == false
  2358. [ 763.995574] send sigkill to 2698 (d.process.acore), adj 15, size 11457
  2359. [ 765.585937] QSEECOM: qseecom_release: data->released == false
  2360. [ 769.256011] pm8058_get_battery_temperature_adc: therm_raw is 1053
  2361. [ 770.612731] QSEECOM: qseecom_release: data->released == false
  2362. [ 775.688079] QSEECOM: qseecom_release: data->released == false
  2363. [ 780.755981] QSEECOM: qseecom_release: data->released == false
  2364. [ 785.792175] QSEECOM: qseecom_release: data->released == false
  2365. [ 790.823303] QSEECOM: qseecom_release: data->released == false
  2366. [ 795.897644] QSEECOM: qseecom_release: data->released == false
  2367. [ 800.810089] QSEECOM: qseecom_release: data->released == false
  2368. [ 803.716094] msm_battery_gauge_alarm_notify: status: 1
  2369. [ 803.792663] msm_battery_gauge_alarm_notify: status: 0
  2370. [ 803.796875] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2371. [ 805.877075] QSEECOM: qseecom_release: data->released == false
  2372. [ 810.900695] QSEECOM: qseecom_release: data->released == false
  2373. [ 811.716064] msm_battery_gauge_alarm_notify: status: 1
  2374. [ 812.121215] msm_battery_gauge_alarm_notify: status: 0
  2375. [ 812.125610] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2376. [ 815.716217] msm_battery_gauge_alarm_notify: status: 1
  2377. [ 815.756500] msm_battery_gauge_alarm_notify: status: 0
  2378. [ 815.761566] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2379. [ 815.925964] QSEECOM: qseecom_release: data->released == false
  2380. [ 820.952209] QSEECOM: qseecom_release: data->released == false
  2381. [ 826.012084] QSEECOM: qseecom_release: data->released == false
  2382. [ 827.716003] msm_battery_gauge_alarm_notify: status: 1
  2383. [ 828.034484] msm_battery_gauge_alarm_notify: status: 0
  2384. [ 828.039398] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2385. [ 829.259277] pm8058_get_battery_temperature_adc: therm_raw is 1041
  2386. [ 831.079864] QSEECOM: qseecom_release: data->released == false
  2387. [ 835.716003] msm_battery_gauge_alarm_notify: status: 1
  2388. [ 836.119720] QSEECOM: qseecom_release: data->released == false
  2389. [ 837.271667] msm_battery_gauge_alarm_notify: status: 0
  2390. [ 837.275939] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2391. [ 840.181976] QSEECOM: qseecom_release: data->released == false
  2392. [ 845.257202] QSEECOM: qseecom_release: data->released == false
  2393. [ 850.338470] QSEECOM: qseecom_release: data->released == false
  2394. [ 855.408905] QSEECOM: qseecom_release: data->released == false
  2395. [ 860.479888] QSEECOM: qseecom_release: data->released == false
  2396. [ 865.948516] QSEECOM: qseecom_release: data->released == false
  2397. [ 870.981414] QSEECOM: qseecom_release: data->released == false
  2398. [ 871.716094] msm_battery_gauge_alarm_notify: status: 1
  2399. [ 873.319946] msm_battery_gauge_alarm_notify: status: 0
  2400. [ 873.324157] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2401. [ 875.716033] msm_battery_gauge_alarm_notify: status: 1
  2402. [ 875.734161] msm_battery_gauge_alarm_notify: status: 0
  2403. [ 875.738342] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2404. [ 876.013458] QSEECOM: qseecom_release: data->released == false
  2405. [ 876.668273] send sigkill to 1926 (ogle.android.gm), adj 15, size 7960
  2406. [ 879.716125] msm_battery_gauge_alarm_notify: status: 1
  2407. [ 879.903533] msm_battery_gauge_alarm_notify: status: 0
  2408. [ 879.908874] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2409. [ 881.028625] QSEECOM: qseecom_release: data->released == false
  2410. [ 886.073425] QSEECOM: qseecom_release: data->released == false
  2411. [ 889.256072] pm8058_get_battery_temperature_adc: therm_raw is 1033
  2412. [ 891.111389] QSEECOM: qseecom_release: data->released == false
  2413. [ 895.146545] QSEECOM: qseecom_release: data->released == false
  2414. [ 895.716064] msm_battery_gauge_alarm_notify: status: 1
  2415. [ 895.832702] msm_battery_gauge_alarm_notify: status: 0
  2416. [ 895.838012] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2417. [ 896.060729] vibrator_enable is stating ...
  2418. [ 896.064270] android_vibrator_off is stating ...
  2419. [ 896.068817] LGE: vibrator_power_set enable=0
  2420. [ 896.075012] vibrator_enable is exting ...
  2421. [ 896.078369] android_vibrator_off is exting ...
  2422. [ 897.495117] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  2423. [ 897.679931] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3
  2424. [ 897.696472] link down, call cfg80211_disconnected
  2425. [ 897.705505] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  2426. [ 897.711303] cfg80211: Calling CRDA to update world regulatory domain
  2427. [ 897.723693] init: no such service 'wifi-crda'
  2428. [ 897.844879] dhd_stop: Enter
  2429. [ 897.846740] wl_android_wifi_off in
  2430. [ 897.852752] =========== WLAN placed in RESET ========
  2431. [ 897.856933] bcm432x_sdcc_wlan_slot_status: 34 0
  2432. [ 897.861450] mmc3: Slot status change detected (1 -> 0)
  2433. [ 898.680999] msm_sdio_dmux_open: Already opened 0
  2434. [ 898.684997] msm_sdio_dmux_open: opened ch 0
  2435. [ 899.716064] msm_battery_gauge_alarm_notify: status: 1
  2436. [ 899.794342] msm_battery_gauge_alarm_notify: status: 0
  2437. [ 899.798522] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2438. [ 900.800384] QSEECOM: qseecom_release: data->released == false
  2439. [ 901.714416] send sigkill to 3666 (mod.filemanager), adj 15, size 12169
  2440. [ 903.478576] NOHZ: local_softirq_pending 08
  2441. [ 903.716156] msm_battery_gauge_alarm_notify: status: 1
  2442. [ 903.807159] msm_battery_gauge_alarm_notify: status: 0
  2443. [ 903.811828] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2444. [ 905.381866] QSEECOM: qseecom_release: data->released == false
  2445. [ 906.127441] NOHZ: local_softirq_pending 08
  2446. [ 910.412902] QSEECOM: qseecom_release: data->released == false
  2447. [ 911.716064] msm_battery_gauge_alarm_notify: status: 1
  2448. [ 915.085205] msm_battery_gauge_alarm_notify: status: 0
  2449. [ 915.090393] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2450. [ 915.443359] QSEECOM: qseecom_release: data->released == false
  2451. [ 918.316497] dhd_open: firmware_path = /system/etc/firmware/fw_bcmdhd_p2p.bin
  2452. [ 918.322692] dhd_open: ifidx 0
  2453. [ 918.325653]
  2454. [ 918.325653] Dongle Host Driver, version 1.15.3
  2455. [ 918.331451] wl_android_wifi_on in
  2456. [ 918.334899] =========== WLAN going back to live ========
  2457. [ 918.578826] bcm432x_sdcc_wlan_slot_status: 34 1
  2458. [ 918.582519] mmc3: Slot status change detected (0 -> 1)
  2459. [ 918.788024] sdio_reset_comm():
  2460. [ 918.802856] DHD: dongle ram size is set to 294912(orig 294912)
  2461. [ 918.941040] Initial WLC_GET_AP value is [0]
  2462. [ 918.944335] Firmware up: op_mode=4, Broadcom Dongle Host Driver mac=00:90:4c:c5:12:38
  2463. [ 918.966644] dhd_preinit_ioctls set keeplive failed -1
  2464. [ 918.974304] dhd_preinit_config : config path : /data/misc/wifi/config
  2465. [ 918.982147] dhd_preinit_proc: Change Macaddr = F0:1C:13:46:15:36
  2466. [ 919.067413] Firmware version = wl0: Mar 16 2012 18:47:05 version 5.90.100.330 (WFD)
  2467. [ 919.077484] CFG80211-ERROR) wl_cfg80211_up : WLC_GET_VERSION=1
  2468. [ 919.087524] p2p0: p2p_dev_addr=f2:1c:13:46:15:36
  2469. [ 919.432250] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
  2470. [ 919.442352] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
  2471. [ 919.716217] msm_battery_gauge_alarm_notify: status: 1
  2472. [ 920.149047] QSEECOM: qseecom_release: data->released == false
  2473. [ 920.385620] msm_battery_gauge_alarm_notify: status: 0
  2474. [ 920.390197] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2475. [ 920.923004] wl_bss_connect_done succeeded
  2476. [ 920.959716] wl_bss_connect_done succeeded
  2477. [ 922.470245] vibrator_enable is stating ...
  2478. [ 922.477935] android_vibrator_off is stating ...
  2479. [ 922.481719] LGE: vibrator_power_set enable=0
  2480. [ 922.486389] vibrator_enable is exting ...
  2481. [ 922.490386] android_vibrator_off is exting ...
  2482. [ 923.716308] msm_battery_gauge_alarm_notify: status: 1
  2483. [ 923.922149] msm_battery_gauge_alarm_notify: status: 0
  2484. [ 923.926879] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2485. [ 925.749206] QSEECOM: qseecom_release: data->released == false
  2486. [ 927.716064] msm_battery_gauge_alarm_notify: status: 1
  2487. [ 927.902770] binder: 849:3882 transaction failed 29189, size 224-0
  2488. [ 928.740600] msm_vidc_dec: Inside vid_dec_open()
  2489. [ 928.744110]
  2490. [ 928.744110] res_trk_download_firmware(): Request firmware download
  2491. [ 928.814575] Unexpected channel ID = 0
  2492. [ 928.817321] Unexpected channel ID = 0send sigkill to 4045 (d.process.acore), adj 15, size 10958
  2493. [ 928.831787] fw_version 1:31:2012
  2494. [ 929.053833] Unexpected channel ID = 522928
  2495. [ 929.220886] msm_vidc_dec: Inside vid_dec_release()
  2496. [ 929.250335] msm_vidc_dec: Return from vid_dec_release()
  2497. [ 929.283081] msm_vidc_dec: Inside vid_dec_open()
  2498. [ 929.304534] Unexpected channel ID = 0
  2499. [ 929.307373] Unexpected channel ID = 0
  2500. [ 929.311370] fw_version 1:31:2012
  2501. [ 929.363922] p2p0: no IPv6 routers present
  2502. [ 929.532714] Unexpected channel ID = 522928
  2503. [ 929.815826] msm_vidc_dec: Inside vid_dec_release()
  2504. [ 929.839141] msm_vidc_dec: Return from vid_dec_release()
  2505. [ 929.890777] msm_vidc_dec: Inside vid_dec_open()
  2506. [ 929.925811] Unexpected channel ID = 0
  2507. [ 929.928741] Unexpected channel ID = 0
  2508. [ 929.933013] fw_version 1:31:2012
  2509. [ 930.115631] Unexpected channel ID = 522928
  2510. [ 930.192718] WARNING: H264MaxLevelExceeded : -2
  2511. [ 930.988708] QSEECOM: qseecom_release: data->released == false
  2512. [ 932.734008] wlan0: no IPv6 routers present
  2513. [ 933.397430] msm_vidc_dec: Inside vid_dec_release()
  2514. [ 933.419525] msm_vidc_dec: Return from vid_dec_release()
  2515. [ 934.045837] msm_vidc_dec: Inside vid_dec_open()
  2516. [ 934.084289] Unexpected channel ID = 0
  2517. [ 934.087127] Unexpected channel ID = 0
  2518. [ 934.091918] fw_version 1:31:2012
  2519. [ 934.295745] Unexpected channel ID = 522928send sigkill to 3456 (tings:superuser), adj 15, size 7976
  2520. [ 934.467529] msm_vidc_dec: Inside vid_dec_release()
  2521. [ 934.487823] msm_vidc_dec: Return from vid_dec_release()
  2522. [ 934.526458] msm_vidc_dec: Inside vid_dec_open()
  2523. [ 934.555206] Unexpected channel ID = 0
  2524. [ 934.558105] Unexpected channel ID = 0
  2525. [ 934.562622] fw_version 1:31:2012
  2526. [ 934.750671] Unexpected channel ID = 522928
  2527. [ 934.835205] msm_vidc_dec: Inside vid_dec_release()
  2528. [ 934.857635] msm_vidc_dec: Return from vid_dec_release()
  2529. [ 935.586120] msm_battery_gauge_alarm_notify: status: 0
  2530. [ 935.590728] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2531. [ 936.033569] QSEECOM: qseecom_release: data->released == false
  2532. [ 941.094665] QSEECOM: qseecom_release: data->released == false
  2533. [ 946.136932] QSEECOM: qseecom_release: data->released == false
  2534. [ 949.259521] pm8058_get_battery_temperature_adc: therm_raw is 1019
  2535. [ 950.172454] QSEECOM: qseecom_release: data->released == false
  2536. [ 951.716094] msm_battery_gauge_alarm_notify: status: 1
  2537. [ 951.738372] msm_battery_gauge_alarm_notify: status: 0
  2538. [ 951.742736] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2539. [ 955.205474] QSEECOM: qseecom_release: data->released == false
  2540. [ 957.336151] send sigkill to 3387 (pal.androidterm), adj 15, size 6601
  2541. [ 960.252716] QSEECOM: qseecom_release: data->released == false
  2542. [ 963.079650] msm_vidc_dec: Inside vid_dec_open()
  2543. [ 963.114318] Unexpected channel ID = 0
  2544. [ 963.117523] Unexpected channel ID = 0
  2545. [ 963.120727] fw_version 1:31:2012
  2546. [ 963.374267] Unexpected channel ID = 522928
  2547. [ 963.436370] WARNING: H264MaxLevelExceeded : -2
  2548. [ 963.716094] msm_battery_gauge_alarm_notify: status: 1
  2549. [ 963.795135] msm_battery_gauge_alarm_notify: status: 0
  2550. [ 963.799713] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2551. [ 964.359710] msm_vidc_dec: Inside vid_dec_release()
  2552. [ 964.379089] msm_vidc_dec: Return from vid_dec_release()
  2553. [ 965.348724] QSEECOM: qseecom_release: data->released == false
  2554. [ 970.383575] QSEECOM: qseecom_release: data->released == false
  2555. [ 971.040985] link down, call cfg80211_disconnected
  2556. [ 971.048889] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev d9d1e000 wl->escan_on 1 drv_status 0x0
  2557. [ 971.061645] cfg80211: Calling CRDA to update world regulatory domain
  2558. [ 971.076538] init: no such service 'wifi-crda'
  2559. [ 971.081024] net_ratelimit: 11 callbacks suppressed
  2560. [ 971.085357] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  2561. [ 971.313354] send sigkill to 1887 (gle.android.gms), adj 15, size 6460
  2562. [ 971.689483] send sigkill to 2143 (ndroid.settings), adj 15, size 6072
  2563. [ 971.716094] msm_battery_gauge_alarm_notify: status: 1
  2564. [ 972.163269] msm_sdio_dmux_open: Already opened 0
  2565. [ 972.167083] msm_sdio_dmux_open: opened ch 0
  2566. [ 972.349426] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev d9d1e000 wl->escan_on 1 drv_status 0x0
  2567. [ 972.518981] wl_bss_connect_done succeeded
  2568. [ 972.574951] wl_bss_connect_done succeeded
  2569. [ 972.584106] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  2570. [ 972.606353] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  2571. [ 972.911987] msm_battery_gauge_alarm_notify: status: 0
  2572. [ 972.923889] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2573. [ 973.885986] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  2574. [ 974.625488] send sigkill to 2992 (share.beweather), adj 15, size 14272
  2575. [ 975.473571] QSEECOM: qseecom_release: data->released == false
  2576. [ 975.716064] msm_battery_gauge_alarm_notify: status: 1
  2577. [ 976.105529] msm_battery_gauge_alarm_notify: status: 0
  2578. [ 976.110534] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2579. [ 976.637298] msm_sdio_dmux_open: Already opened 0
  2580. [ 976.641052] msm_sdio_dmux_open: opened ch 0
  2581. [ 979.716033] msm_battery_gauge_alarm_notify: status: 1
  2582. [ 980.697052] QSEECOM: qseecom_release: data->released == false
  2583. [ 981.852630] msm_battery_gauge_alarm_notify: status: 0
  2584. [ 981.857666] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2585. [ 983.716033] msm_battery_gauge_alarm_notify: status: 1
  2586. [ 984.763977] wlan0: no IPv6 routers present
  2587. [ 985.429138] QSEECOM: qseecom_release: data->released == false
  2588. [ 990.451690] QSEECOM: qseecom_release: data->released == false
  2589. [ 994.706817] msm_battery_gauge_alarm_notify: status: 0
  2590. [ 994.711425] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2591. [ 996.050201] QSEECOM: qseecom_release: data->released == false
  2592. [ 1001.093597] QSEECOM: qseecom_release: data->released == false
  2593. [ 1006.187164] QSEECOM: qseecom_release: data->released == false
  2594. [ 1007.716156] msm_battery_gauge_alarm_notify: status: 1
  2595. [ 1007.748901] msm_battery_gauge_alarm_notify: status: 0
  2596. [ 1007.754608] pm8058-charger pm8058-charger: msm_battery_gauge_alarm_notify: spurious interrupt
  2597. [ 1008.912475] send sigkill to 849 (d.process.media), adj 15, size 7830
  2598. [ 1009.258300] pm8058_get_battery_temperature_adc: therm_raw is 1010
  2599. [ 1011.198547] QSEECOM: qseecom_release: data->released == false
  2600. [ 1016.236419] QSEECOM: qseecom_release: data->released == false
  2601. [ 1020.542419] link down, call cfg80211_disconnected
  2602. [ 1020.564849] cfg80211: Calling CRDA to update world regulatory domain
  2603. [ 1020.601806] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  2604. [ 1020.639495] init: no such service 'wifi-crda'
  2605. [ 1021.792541] wl_bss_connect_done succeeded
  2606. [ 1021.798095] msm_sdio_dmux_open: Already opened 0
  2607. [ 1021.802215] msm_sdio_dmux_open: opened ch 0
  2608. [ 1021.829864] wl_bss_connect_done succeeded
  2609. [ 1021.845733] QSEECOM: qseecom_release: data->released == false
  2610. [ 1021.860504] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  2611. [ 1021.879119] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  2612. [ 1022.974304] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
  2613. [ 1022.983764] Unable to handle kernel paging request at virtual address 002f3266
  2614. [ 1022.993621] pgd = d51bc000
  2615. [ 1022.995941] [002f3266] *pgd=00000000
  2616. [ 1022.999298] Internal error: Oops: 5 [#1] PREEMPT SMP
  2617. [ 1023.004089] Modules linked in:
  2618. [ 1023.007568] CPU: 0 Tainted: G W (3.0.31-cyanogenmod+ #1)
  2619. [ 1023.013610] PC is at dhd_ioctl_entry_local+0x50/0xe8
  2620. [ 1023.018768] LR is at wldev_ioctl+0x48/0x50
  2621. [ 1023.022674] pc : c055491c lr : c056ac84 psr: 20000013
  2622. [ 1023.022705] sp : d6a43ae0 ip : 00000000 fp : 00000000
  2623. [ 1023.033386] r10: d6a43b6c r9 : 00000014 r8 : 00000008
  2624. [ 1023.038604] r7 : d6a43b00 r6 : 00000000 r5 : d9d1f000 r4 : d9780300
  2625. [ 1023.045379] r3 : d9780d54 r2 : 002f3262 r1 : d6a43b00 r0 : d9d1f000
  2626. [ 1023.051818] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
  2627. [ 1023.058685] Control: 10c5787d Table: 553bc06a DAC: 00000015
  2628. [ 1023.064666]
  2629. [ 1023.064697] PC: 0xc055489c:
  2630. [ 1023.068664] 489c ca000007 e593000c e3500000 0a000004 e2811fa5 e7901101 e3510000 15910004
  2631. [ 1023.076934] 48bc 1a000000 e3a00000 e1a01003 eaffffc8 e92d40f7 e2505000 e1a07001 0a000004
  2632. [ 1023.085357] 48dc e3750e42 13a06000 15954420 12843ea5 1a000006 eb066745 e3500000 03e06015
  2633. [ 1023.093261] 48fc 13e06015 159f00a0 0a000020 ea00001d e5932000 e2833004 e3520000 0a000002
  2634. [ 1023.101409] 491c e5922004 e1520005 0a000003 e2866001 e3560010 1afffff5 ea000016 e1a00004
  2635. [ 1023.109588] 493c ebfffead e5973008 e1a02007 e1a01006 e1a00004 e58d3000 e5973004 ebfff8f2
  2636. [ 1023.117736] 495c e1a01004 e1a06000 e1a00005 e1a02006 ebffff9f e1a00004 ebffff1c ea000003
  2637. [ 1023.125915] 497c e59f0028 e3e06012 e59f1024 eb0cd064 e1a00006 e8bd80fe eb06671c e3500000
  2638. [ 1023.134063]
  2639. [ 1023.134063] LR: 0xc056ac04:
  2640. [ 1023.138183] ac04 e3a02004 ebfadf2c e3540000 0a000003 e2860004 e1a01009 e1a02004 ebfadf26
  2641. [ 1023.146484] ac24 e1a0000a e8bd87fc c08eaf9c c0abfb5a c0abfb70 c0abfb89 e92d41f0 e24dd018
  2642. [ 1023.154632] ac44 e1a04001 e1a07000 e3a01018 e1a0000d e1a06002 e1a08003 ebfae0ef e59d3030
  2643. [ 1023.162780] ac64 e1a00007 e1a0100d e1a02004 e1a0500d e98d0140 e5cd300c e58d4000 ebffa711
  2644. [ 1023.170959] ac84 e28dd018 e8bd81f0 e3510002 e92d401f 83e00000 e58d100c 8a000005 e3a0108e
  2645. [ 1023.179107] aca4 e28d200c e3a03004 e3a0c001 e58dc000 ebffffe0 e28dd014 e8bd8000 e92d4007
  2646. [ 1023.187286] acc4 e3a03004 e1a02001 e3a0108d e3a0c000 e58dc000 ebffffd7 e8bd800e e92d4007
  2647. [ 1023.195434] ace4 e2512000 03e0000b 0a000004 e3a01019 e3a03024 e3a0c000 e58dc000 ebffffcd
  2648. [ 1023.203613]
  2649. [ 1023.203613] SP: 0xd6a43a60:
  2650. [ 1023.207733] 3a60 00010000 d72423f8 d72423c0 0000ee6b 00000000 a9cec0e8 0000036c 000000ee
  2651. [ 1023.216003] 3a80 d72423f8 ffffffff d6a43acc 00000000 d6a43b00 c088c4ac d9d1f000 d6a43b00
  2652. [ 1023.224182] 3aa0 002f3262 d9780d54 d9780300 d9d1f000 00000000 d6a43b00 00000008 00000014
  2653. [ 1023.232330] 3ac0 d6a43b6c 00000000 00000000 d6a43ae0 c056ac84 c055491c 20000013 ffffffff
  2654. [ 1023.240447] 3ae0 d9d1f000 d6a43b00 00000107 00000107 d6a43b00 d6a43b70 d9d1f000 c056ac84
  2655. [ 1023.248657] 3b00 00000107 d6a43b70 00000008 00000001 00000000 00000000 00000000 d6a43b70
  2656. [ 1023.256774] 3b20 d9d1f000 c0abd16a 00000004 c056afd0 00000001 c0abd16a d6a43b6c d6a43b70
  2657. [ 1023.265228] 3b40 c0abd16a d9d1f000 d64d2a80 d6c6a710 00000000 c056b034 d6a43b70 00000100
  2658. [ 1023.273132]
  2659. [ 1023.273162] R0: 0xd9d1ef80:
  2660. [ 1023.277526] ef80 00000000 00306c77 00000000 00000000 00000000 01f00000 006d0000 12340000
  2661. [ 1023.285552] efa0 006d0001 01e40000 4e200000 edb4137f 04110064 65684309 6e6f7276 00003432
  2662. [ 1023.293701] efc0 00000000 00000000 00000000 00000000 00000000 000c0000 84820000 3024160b
  2663. [ 1023.301879] efe0 120c6c48 00006018 2b0a0000 00000000 01a4ffaa 00600000 000a0000 00000000
  2664. [ 1023.310272] f000 30703270 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2665. [ 1023.318176] f020 00000000 00000000 00000000 da7747e4 00000000 00000000 00000000 00000000
  2666. [ 1023.326354] f040 00000000 00000003 d9d1e048 d974d048 d9d1f050 d9d1f050 d9d1f058 d9d1f058
  2667. [ 1023.334503] f060 00006000 40004800 00004800 00004020 00000015 00000015 00000000 00000000
  2668. [ 1023.342651]
  2669. [ 1023.342681] R1: 0xd6a43a80:
  2670. [ 1023.346801] 3a80 d72423f8 ffffffff d6a43acc 00000000 d6a43b00 c088c4ac d9d1f000 d6a43b00
  2671. [ 1023.355316] 3aa0 002f3262 d9780d54 d9780300 d9d1f000 00000000 d6a43b00 00000008 00000014
  2672. [ 1023.363250] 3ac0 d6a43b6c 00000000 00000000 d6a43ae0 c056ac84 c055491c 20000013 ffffffff
  2673. [ 1023.371398] 3ae0 d9d1f000 d6a43b00 00000107 00000107 d6a43b00 d6a43b70 d9d1f000 c056ac84
  2674. [ 1023.379577] 3b00 00000107 d6a43b70 00000008 00000001 00000000 00000000 00000000 d6a43b70
  2675. [ 1023.387725] 3b20 d9d1f000 c0abd16a 00000004 c056afd0 00000001 c0abd16a d6a43b6c d6a43b70
  2676. [ 1023.395874] 3b40 c0abd16a d9d1f000 d64d2a80 d6c6a710 00000000 c056b034 d6a43b70 00000100
  2677. [ 1023.404052] 3b60 00000000 00000001 00000020 00000001 0063706d 00000001 00000000 00000000
  2678. [ 1023.412200]
  2679. [ 1023.412200] R3: 0xd9780cd4:
  2680. [ 1023.416351] 0cd4 00000081 84820801 3024160b 04326c48 6018120c 187c1a2d 0000ff1b 00000000
  2681. [ 1023.424621] 0cf4 00000000 00000000 00000000 00000000 000a163d 00000017 00000000 00000000
  2682. [ 1023.432769] 0d14 00000000 00000000 4a01017f 0a00140e c8012c00 05001400 dd001900 18100009
  2683. [ 1023.440948] 0d34 05f00502 18dd0000 02f25000 00800101 0000a403 0000a427 005e4342 002f3262
  2684. [ 1023.449096] 0d54 90001edd 187c334c 0000ff1b 00000000 00000000 00000000 00000000 00000000
  2685. [ 1023.457244] 0d74 90001add 000a344c 00000017 00000000 00000000 00000000 00000000 00000000
  2686. [ 1023.465423] 0d94 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2687. [ 1023.473602] 0db4 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2688. [ 1023.481750]
  2689. [ 1023.481750] R4: 0xd9780280:
  2690. [ 1023.485870] 0280 00000002 00000000 00000000 00000000 00000000 00000000 ffff8d10 00000000
  2691. [ 1023.494140] 02a0 00000000 00000000 00000000 00000000 00000000 d97802b4 d97802b4 00000000
  2692. [ 1023.502319] 02c0 00000000 00000000 00000000 d97802cc d97802cc da77aa3c da77aa40 da77aa40
  2693. [ 1023.510467] 02e0 00000001 c0d9b780 00000000 00000000 da339380 c090da68 00000000 00000000
  2694. [ 1023.518615] 0300 d9694a00 d9694e00 d9d1f000 d9d2ff80 00000000 c057537c 00000000 00000000
  2695. [ 1023.526794] 0320 00000000 00000000 c057537c c057537c 00000000 c057537c 00000000 c057537c
  2696. [ 1023.535186] 0340 00000000 c057537c 00000000 00000000 00000000 c057537c c0574514 00000000
  2697. [ 1023.543121] 0360 c0575190 00000000 00000000 00000000 00000000 00000000 00000000 c0574bdc
  2698. [ 1023.551269]
  2699. [ 1023.551269] R5: 0xd9d1ef80:
  2700. [ 1023.555419] ef80 00000000 00306c77 00000000 00000000 00000000 01f00000 006d0000 12340000
  2701. [ 1023.563659] efa0 006d0001 01e40000 4e200000 edb4137f 04110064 65684309 6e6f7276 00003432
  2702. [ 1023.571868] efc0 00000000 00000000 00000000 00000000 00000000 000c0000 84820000 3024160b
  2703. [ 1023.580200] efe0 120c6c48 00006018 2b0a0000 00000000 01a4ffaa 00600000 000a0000 00000000
  2704. [ 1023.588165] f000 30703270 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2705. [ 1023.596343] f020 00000000 00000000 00000000 da7747e4 00000000 00000000 00000000 00000000
  2706. [ 1023.604492] f040 00000000 00000003 d9d1e048 d974d048 d9d1f050 d9d1f050 d9d1f058 d9d1f058
  2707. [ 1023.612640] f060 00006000 40004800 00004800 00004020 00000015 00000015 00000000 00000000
  2708. [ 1023.620788]
  2709. [ 1023.620819] R7: 0xd6a43a80:
  2710. [ 1023.625213] 3a80 d72423f8 ffffffff d6a43acc 00000000 d6a43b00 c088c4ac d9d1f000 d6a43b00
  2711. [ 1023.633209] 3aa0 002f3262 d9780d54 d9780300 d9d1f000 00000000 d6a43b00 00000008 00000014
  2712. [ 1023.641387] 3ac0 d6a43b6c 00000000 00000000 d6a43ae0 c056ac84 c055491c 20000013 ffffffff
  2713. [ 1023.649536] 3ae0 d9d1f000 d6a43b00 00000107 00000107 d6a43b00 d6a43b70 d9d1f000 c056ac84
  2714. [ 1023.657714] 3b00 00000107 d6a43b70 00000008 00000001 00000000 00000000 00000000 d6a43b70
  2715. [ 1023.665863] 3b20 d9d1f000 c0abd16a 00000004 c056afd0 00000001 c0abd16a d6a43b6c d6a43b70
  2716. [ 1023.674011] 3b40 c0abd16a d9d1f000 d64d2a80 d6c6a710 00000000 c056b034 d6a43b70 00000100
  2717. [ 1023.682128] 3b60 00000000 00000001 00000020 00000001 0063706d 00000001 00000000 00000000
  2718. [ 1023.690338]
  2719. [ 1023.690368] R10: 0xd6a43aec:
  2720. [ 1023.694824] 3aec 00000107 d6a43b00 d6a43b70 d9d1f000 c056ac84 00000107 d6a43b70 00000008
  2721. [ 1023.702850] 3b0c 00000001 00000000 00000000 00000000 d6a43b70 d9d1f000 c0abd16a 00000004
  2722. [ 1023.710998] 3b2c c056afd0 00000001 c0abd16a d6a43b6c d6a43b70 c0abd16a d9d1f000 d64d2a80
  2723. [ 1023.719177] 3b4c d6c6a710 00000000 c056b034 d6a43b70 00000100 00000000 00000001 00000020
  2724. [ 1023.727325] 3b6c 00000001 0063706d 00000001 00000000 00000000 00000000 00000000 00000000
  2725. [ 1023.735473] 3b8c 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2726. [ 1023.743652] 3bac 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2727. [ 1023.751800] 3bcc 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2728. [ 1023.760223] Process wpa_supplicant (pid: 4243, stack limit = 0xd6a422f0)
  2729. [ 1023.766540] Stack: (0xd6a43ae0 to 0xd6a44000)
  2730. [ 1023.771148] 3ae0: d9d1f000 d6a43b00 00000107 00000107 d6a43b00 d6a43b70 d9d1f000 c056ac84
  2731. [ 1023.779052] 3b00: 00000107 d6a43b70 00000008 00000001 00000000 00000000 00000000 d6a43b70
  2732. [ 1023.787475] 3b20: d9d1f000 c0abd16a 00000004 c056afd0 00000001 c0abd16a d6a43b6c d6a43b70
  2733. [ 1023.795623] 3b40: c0abd16a d9d1f000 d64d2a80 d6c6a710 00000000 c056b034 d6a43b70 00000100
  2734. [ 1023.803527] 3b60: 00000000 00000001 00000020 00000001 0063706d 00000001 00000000 00000000
  2735. [ 1023.811950] 3b80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2736. [ 1023.820098] 3ba0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2737. [ 1023.828247] 3bc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2738. [ 1023.836181] 3be0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2739. [ 1023.844573] 3c00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2740. [ 1023.852722] 3c20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2741. [ 1023.860656] 3c40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2742. [ 1023.868804] 3c60: 00000000 00000000 00000000 00000000 d9780000 d9d1f000 d6a43ca8 c056edf8
  2743. [ 1023.877227] 3c80: d9780000 c085e788 000000d3 00000000 00000000 c0d9bed0 c0d9b8e8 c070af24
  2744. [ 1023.885406] 3ca0: c090d708 c0278904 5272dc54 00001093 d6c6a700 d6c6a710 d6c6a714 da774c00
  2745. [ 1023.893280] 3cc0: d9780000 d9d1f000 d6c6a700 d64d2a80 c070ad4c d59f1200 c1388ce0 c1388ce4
  2746. [ 1023.901702] 3ce0: d6a43d04 c07092a4 d64d2a80 d64d2a80 00000028 c070ad40 da772200 c0708ef4
  2747. [ 1023.909851] 3d00: d59f1200 7fffffff 00000000 d64d2a80 d59f1200 d6a43f74 d6a43df8 00000000
  2748. [ 1023.918029] 3d20: 00000028 00000000 00000000 c07098c8 00000000 00000000 00000000 d74aad80
  2749. [ 1023.925933] 3d40: d5ca2b00 00000000 00001093 000003f2 000003f2 00000000 00000000 cf9b3e00
  2750. [ 1023.934356] 3d60: d6a43df8 d6a43f74 00000028 00000000 00000000 d6a43f20 00000000 c06ca06c
  2751. [ 1023.942504] 3d80: d6a43db0 0000000c 00000000 00000001 ffffffff 00000000 00000000 00000000
  2752. [ 1023.950408] 3da0: 00000000 00000000 d72423c0 d5224d94 00000000 00000000 00000000 0000022f
  2753. [ 1023.958831] 3dc0: d6a43df8 000003e8 000000a9 00000000 00000000 0000000c 00000000 d6a43e80
  2754. [ 1023.966979] 3de0: d81f8c00 00000fff d6a43f64 00000040 d6a42000 00000000 00000000 c06c9ea4
  2755. [ 1023.975158] 3e00: 00000040 00000028 cf9b3e00 001d2af8 d6a43d3c d6a43f74 ffffffff d6a43ee0
  2756. [ 1023.983062] 3e20: d6a43e60 d6a43ee0 d6a43e60 00000128 c0105f68 d6a43ee0 00000008 d6a43f74
  2757. [ 1023.991485] 3e40: cf9b3e00 00000000 00000028 00000000 d6a43ee0 c06ca7e8 0000000c 00000008
  2758. [ 1023.999603] 3e60: 00000010 00000000 00000000 c124f6f0 cf9b3e00 00000001 00000000 00000000
  2759. [ 1024.007781] 3e80: 000000b9 00000003 00000040 00000fff d81f8c00 d6a43f5c d6a43db0 d6a43f64
  2760. [ 1024.015686] 3ea0: 00000000 becc776c 00000020 becc78f4 becc78fc becc796c 00000040 becc78fc
  2761. [ 1024.024108] 3ec0: 00000029 00000000 00000029 c06c9574 00000fff d81f8c00 becc78fc c06ca4e8
  2762. [ 1024.032257] 3ee0: 001d4f18 00000000 2f617461 6373696d 6669772f 6f732f69 74656b63 70772f73
  2763. [ 1024.040191] 3f00: 74635f61 355f6c72 372d3935 00000000 000003fe 00000001 c0d2ea80 00000001
  2764. [ 1024.048614] 3f20: c9c921d8 00000000 0002e75a c0117de4 d6a43f80 c12113a0 0002e75a c01ef124
  2765. [ 1024.056732] 3f40: 00000000 cf9b3e00 00000000 becc7674 00000128 c0105f68 d6a42000 00000000
  2766. [ 1024.064910] 3f60: 001d24b0 c06ca974 00000000 becc76b8 d6a43f90 d6a43e60 0000000c d6a43ee0
  2767. [ 1024.072814] 3f80: 00000001 00000000 00000000 00000000 fffffff7 00000000 001d4eb8 0000000c
  2768. [ 1024.081237] 3fa0: 001c1428 c0105dc0 001d4eb8 0000000c 0000000b becc7674 00000000 00000001
  2769. [ 1024.089385] 3fc0: 001d4eb8 0000000c 001c1428 00000128 00000000 00000000 00000000 001d24b0
  2770. [ 1024.097534] 3fe0: 000c5b68 becc7670 00082e45 401592b4 40000010 0000000b 00000000 00000000
  2771. [ 1024.105499] [<c055491c>] (dhd_ioctl_entry_local+0x50/0xe8) from [<c056ac84>] (wldev_ioctl+0x48/0x50)
  2772. [ 1024.114837] [<c056ac84>] (wldev_ioctl+0x48/0x50) from [<c056afd0>] (wldev_iovar_setbuf+0x64/0x80)
  2773. [ 1024.123687] [<c056afd0>] (wldev_iovar_setbuf+0x64/0x80) from [<c056b034>] (wldev_iovar_setint+0x48/0x50)
  2774. [ 1024.133178] [<c056b034>] (wldev_iovar_setint+0x48/0x50) from [<c056edf8>] (wl_cfg80211_cancel_remain_on_channel+0x74/0x80)
  2775. [ 1024.144195] [<c056edf8>] (wl_cfg80211_cancel_remain_on_channel+0x74/0x80) from [<c085e788>] (nl80211_cancel_remain_on_channel+0x54/0x58)
  2776. [ 1024.156433] [<c085e788>] (nl80211_cancel_remain_on_channel+0x54/0x58) from [<c070af24>] (genl_rcv_msg+0x1d8/0x224)
  2777. [ 1024.166748] [<c070af24>] (genl_rcv_msg+0x1d8/0x224) from [<c07092a4>] (netlink_rcv_skb+0x4c/0xb0)
  2778. [ 1024.175567] [<c07092a4>] (netlink_rcv_skb+0x4c/0xb0) from [<c070ad40>] (genl_rcv+0x18/0x24)
  2779. [ 1024.183685] [<c070ad40>] (genl_rcv+0x18/0x24) from [<c0708ef4>] (netlink_unicast+0x2b8/0x360)
  2780. [ 1024.192382] [<c0708ef4>] (netlink_unicast+0x2b8/0x360) from [<c07098c8>] (netlink_sendmsg+0x270/0x2f0)
  2781. [ 1024.201751] [<c07098c8>] (netlink_sendmsg+0x270/0x2f0) from [<c06ca06c>] (sock_sendmsg+0xac/0xd4)
  2782. [ 1024.210571] [<c06ca06c>] (sock_sendmsg+0xac/0xd4) from [<c06ca7e8>] (__sys_sendmsg+0x1d0/0x254)
  2783. [ 1024.219024] [<c06ca7e8>] (__sys_sendmsg+0x1d0/0x254) from [<c06ca974>] (sys_sendmsg+0x3c/0x60)
  2784. [ 1024.227874] [<c06ca974>] (sys_sendmsg+0x3c/0x60) from [<c0105dc0>] (ret_fast_syscall+0x0/0x30)
  2785. [ 1024.236450] Code: e5932000 e2833004 e3520000 0a000002 (e5922004)
  2786. [ 1024.441406] ---[ end trace 8fb92908db658886 ]---
  2787. [ 1024.446228] Kernel panic - not syncing: Fatal exception
  2788. [ 1024.451019] [<c010cf9c>] (unwind_backtrace+0x0/0x12c) from [<c08889a0>] (panic+0x15c/0x2dc)
  2789. [ 1024.459777] [<c08889a0>] (panic+0x15c/0x2dc) from [<c010a12c>] (die+0x258/0x2a0)
  2790. [ 1024.467254] [<c010a12c>] (die+0x258/0x2a0) from [<c0111fa0>] (__do_kernel_fault+0x64/0x84)
  2791. [ 1024.475189] [<c0111fa0>] (__do_kernel_fault+0x64/0x84) from [<c088e658>] (do_page_fault+0x2f0/0x318)
  2792. [ 1024.484680] [<c088e658>] (do_page_fault+0x2f0/0x318) from [<c01002d4>] (do_DataAbort+0x34/0x94)
  2793. [ 1024.493347] [<c01002d4>] (do_DataAbort+0x34/0x94) from [<c088c4ac>] (__dabt_svc+0x4c/0x60)
  2794. [ 1024.501617] Exception stack(0xd6a43a98 to 0xd6a43ae0)
  2795. [ 1024.506256] 3a80: d9d1f000 d6a43b00
  2796. [ 1024.514801] 3aa0: 002f3262 d9780d54 d9780300 d9d1f000 00000000 d6a43b00 00000008 00000014
  2797. [ 1024.522827] 3ac0: d6a43b6c 00000000 00000000 d6a43ae0 c056ac84 c055491c 20000013 ffffffff
  2798. [ 1024.530731] [<c088c4ac>] (__dabt_svc+0x4c/0x60) from [<c055491c>] (dhd_ioctl_entry_local+0x50/0xe8)
  2799. [ 1024.540191] [<c055491c>] (dhd_ioctl_entry_local+0x50/0xe8) from [<c056ac84>] (wldev_ioctl+0x48/0x50)
  2800. [ 1024.549255] [<c056ac84>] (wldev_ioctl+0x48/0x50) from [<c056afd0>] (wldev_iovar_setbuf+0x64/0x80)
  2801. [ 1024.558349] [<c056afd0>] (wldev_iovar_setbuf+0x64/0x80) from [<c056b034>] (wldev_iovar_setint+0x48/0x50)
  2802. [ 1024.567901] [<c056b034>] (wldev_iovar_setint+0x48/0x50) from [<c056edf8>] (wl_cfg80211_cancel_remain_on_channel+0x74/0x80)
  2803. [ 1024.578979] [<c056edf8>] (wl_cfg80211_cancel_remain_on_channel+0x74/0x80) from [<c085e788>] (nl80211_cancel_remain_on_channel+0x54/0x58)
  2804. [ 1024.591278] [<c085e788>] (nl80211_cancel_remain_on_channel+0x54/0x58) from [<c070af24>] (genl_rcv_msg+0x1d8/0x224)
  2805. [ 1024.601623] [<c070af24>] (genl_rcv_msg+0x1d8/0x224) from [<c07092a4>] (netlink_rcv_skb+0x4c/0xb0)
  2806. [ 1024.610107] [<c07092a4>] (netlink_rcv_skb+0x4c/0xb0) from [<c070ad40>] (genl_rcv+0x18/0x24)
  2807. [ 1024.618896] [<c070ad40>] (genl_rcv+0x18/0x24) from [<c0708ef4>] (netlink_unicast+0x2b8/0x360)
  2808. [ 1024.627410] [<c0708ef4>] (netlink_unicast+0x2b8/0x360) from [<c07098c8>] (netlink_sendmsg+0x270/0x2f0)
  2809. [ 1024.636779] [<c07098c8>] (netlink_sendmsg+0x270/0x2f0) from [<c06ca06c>] (sock_sendmsg+0xac/0xd4)
  2810. [ 1024.645629] [<c06ca06c>] (sock_sendmsg+0xac/0xd4) from [<c06ca7e8>] (__sys_sendmsg+0x1d0/0x254)
  2811. [ 1024.653839] [<c06ca7e8>] (__sys_sendmsg+0x1d0/0x254) from [<c06ca974>] (sys_sendmsg+0x3c/0x60)
  2812. [ 1024.662994] [<c06ca974>] (sys_sendmsg+0x3c/0x60) from [<c0105dc0>] (ret_fast_syscall+0x0/0x30)
  2813. [ 1024.671508] CPU0: stopping
  2814. [ 1024.673400] [<c010cf9c>] (unwind_backtrace+0x0/0x12c) from [<c010b00c>] (handle_IPI+0x13c/0x2c4)
  2815. [ 1024.682220] [<c010b00c>] (handle_IPI+0x13c/0x2c4) from [<c01003d0>] (gic_handle_irq+0x9c/0xac)
  2816. [ 1024.690826] [<c01003d0>] (gic_handle_irq+0x9c/0xac) from [<c088c514>] (__irq_svc+0x54/0x80)
  2817. [ 1024.699066] Exception stack(0xd7e2bf60 to 0xd7e2bfa8)
  2818. [ 1024.704193] bf60: fffffdff 00000000 00000001 d5eb965c 00000022 013cd670 00000001 00000004
  2819. [ 1024.712341] bf80: c0105f68 d7e2a000 00000000 40d3a8fc e302e303 d7e2bfa8 c027e73c c0105dc0
  2820. [ 1024.720428] bfa0: 20000013 ffffffff
  2821. [ 1024.723999] [<c088c514>] (__irq_svc+0x54/0x80) from [<c0105dc0>] (ret_fast_syscall+0x0/0x30)
  2822. [ 1024.832885] subsystem-fatal-8x60: Q6 NMI was sent.
  2823. [ 1025.844787] Rebooting in 5 seconds..set_dload_mode : 0
  2824. [ 1030.860839] restart time : 2013-10-31 22:40:28.775341208 UTC
  2825. [ 1030.868103] Going down for restart now
  2826.  
  2827. No errors detected
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!