Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ## Booting image at b0040000 ...
- Check vendor string... Image Name: ADM8668 Linux Kernel(2.4.31)
- Created: 2010-10-13 2:14:52 UTC
- Image Type: MIPS Linux Kernel Image (gzip compressed)
- Data Size: 3219392 Bytes = 3.1 MB
- Load Address: 00002000
- Entry Point: 80006270
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- Starting kernel ...
- [ 0.000000] Linux version 2.6.35.7adm8668-1 (neutronscott@iBook) (gcc version 3.4.6 (OpenWrt-2.0)) #46 PREEMPT Tue Oct 12 22:14:42 EDT 2010
- [ 0.000000] CPU revision is: 0001800b (MIPS 4Kc)
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 03ffffff @ 00000000 (usable)
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] Normal 0x00000000 -> 0x00003fff
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[1] active PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x00003fff
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16255
- [ 0.000000] Kernel command line: rootfs=cramfs root=1f01 console=ttyS0
- [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Primary instruction cache 8kB, VIPT, 2-way, linesize 16 bytes.
- [ 0.000000] Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 16 bytes
- [ 0.000000] Memory: 61256k/65532k available (2772k kernel code, 4276k reserved, 615k data, 140k init, 0k highmem)
- [ 0.000000] NR_IRQS:32
- [ 0.000000] ADM8668 CPU clock: 200 MHz
- [ 0.000000] Calibrating delay loop... 199.47 BogoMIPS (lpj=997376)
- [ 0.200000] pid_max: default: 32768 minimum: 301
- [ 0.200000] Mount-cache hash table entries: 512
- [ 0.210000] NET: Registered protocol family 16
- [ 0.220000] adm8668_pci_init()
- [ 0.220000] ADM8668 reboot setup
- [ 0.220000] ADM8668 DEV: register uart
- [ 0.220000] ADM8668 DEV: register usbh
- [ 0.300000] bio: create slab <bio-0> at 0
- [ 0.310000] pci 0000:00:01.0: BAR 0: assigned [mem 0x16000000-0x16007fff]
- [ 0.310000] pci 0000:00:01.0: BAR 0: set to [mem 0x16000000-0x16007fff] (PCI address [0x16000000-0x16007fff]
- [ 0.320000] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.320000] Switching to clocksource MIPS
- [ 0.340000] NET: Registered protocol family 2
- [ 0.340000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.350000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.350000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.350000] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.350000] TCP reno registered
- [ 0.350000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.350000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.350000] NET: Registered protocol family 1
- [ 0.350000] adm8668_uart.0: ttyS0 at MMIO 0x1e400000 (irq = 6) is a adm8668_uart
- [ 0.580000] console [ttyS0] enabled
- [ 0.600000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.600000] Registering mini_fo version $Id$
- [ 0.610000] JFFS2 version 2.2. © 2001-2006 Red Hat, Inc.
- [ 0.610000] msgmni has been set to 119
- [ 0.620000] alg: No test for stdrng (krng)
- [ 0.940000] io scheduler noop registered (default)
- [ 1.000000] loop: module loaded
- [ 1.020000] ADM8668 NOR flash device: 800000 at 10000000
- [ 1.020000] adm8668: Found 1 x16 devices at 0x0 in 16-bit bank
- [ 1.030000] Amd/Fujitsu Extended Query Table at 0x0040
- [ 1.030000] number of CFI chips: 1
- [ 1.030000] Creating 4 MTD partitions on "adm8668":
- [ 1.040000] 0x000000040000-0x000000200000 : "linux"
- [ 1.060000] 0x000000200000-0x000000600000 : "rootfs"
- [ 1.080000] 0x000000600000-0x000000800000 : "rootfs_data"
- [ 1.090000] 0x000000040000-0x000000600000 : "firmware"
- [ 1.110000] ADM8668 NOR flash device initialized
- [ 1.120000] PPP generic driver version 2.4.2
- [ 1.130000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
- [ 1.130000] rt2x00pci -> rt2x00pci_probe: Error - MWI not available.
- [ 1.180000] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
- [ 1.190000] net eth0: Infineon-ADMtek onchip network rev 0 at MMIO 0xb1a00000 00:21:29:ef:53:f5, IRQ 7
- [ 1.200000] net eth1: Infineon-ADMtek onchip network rev 0 at MMIO 0xb1600000 00:21:29:ef:53:f6, IRQ 8
- [ 1.210000] Netfilter messages via NETLINK v0.30.
- [ 1.210000] nf_conntrack version 0.5.0 (957 buckets, 3828 max)
- [ 1.220000] ctnetlink v0.93: registering with nfnetlink.
- [ 1.230000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.230000] TCP cubic registered
- [ 1.230000] NET: Registered protocol family 17
- [ 1.260000] VFS: Mounted root (cramfs filesystem) readonly on device 31:1.
- [ 1.260000] Freeing 0 unused prom.
- [ 1.270000] Freeing unused kernel memory: 140k freed
- init started: BusyBox v1.15.3 (2010-10-09 00:02:36 EDT)
- Please press Enter to activate this console. [ 5.910000] force 100mbps on lan switch
- [ 5.910000] force 100mbps on lan switch
- [ 5.920000] force 100mbps on lan switch
- [ 6.380000] force 100mbps on lan switch
- [ 6.460000] device eth0 entered promiscuous mode
- [ 6.460000] force 100mbps on lan switch
- [ 6.460000] br-lan: port 1(eth0) entering forwarding state
- [ 6.470000] br-lan: port 1(eth0) entering forwarding state
- [ 6.590000] force 100mbps on lan switch
- sysinit: udhcpc (v1.15.3) started
- sysinit: ln: /dev/root: Read-only file system
- sysinit: /etc/rc.common: line 20: can't create /etc/config/wireless: Read-only file system
- sysinit: Sending discover...
- sysinit: Sending select for 10.42.43.10...
- sysinit: Lease of 10.42.43.10 obtained, lease time 3600
- sysinit: Loading defaults
- sysinit: /etc/rc.common: eval: line 1: can't create /proc/sys/net/ipv4/tcp_syncookies: nonexistent directory
- sysinit: udhcpc: ifconfig eth1 10.42.43.10 netmask 255.255.255.0 broadcast 10.42.43.255
- sysinit: iptables v1.4.6: can't initialize iptables table `raw': Table does not exist (do you need to insmod?)
- sysinit: Perhaps iptables or your kernel needs to be upgraded.
- sysinit: iptables v1.4.6: can't initialize iptables table `raw': Table does not exist (do you need to insmod?)
- sysinit: Perhaps iptables or your kernel needs to be upgraded.
- sysinit: udhcpc: setting default routers: 10.42.43.1
- sysinit: Loading synflood protection
- sysinit: iptables: No chain/target/match by that name.
- sysinit: udhcpc: setting dns servers: 10.42.43.1
- sysinit: Adding custom chains
- sysinit: Loading zones
- sysinit: iptables v1.4.6: can't initialize iptables table `raw': Table does not exist (do you need to insmod?)
- sysinit: Perhaps iptables or your kernel needs to be upgraded.
- sysinit: iptables v1.4.6: can't initialize iptables table `raw': Table does not exist (do you need to insmod?)
- sysinit: Perhaps iptables or your kernel needs to be upgraded.
- sysinit: Loading forwarding
- sysinit: Loading redirects
- sysinit: Loading rules
- sysinit: Loading includes
- sysinit: Loading zone defaults
- sysinit: iptables v1.4.6: can't initialize iptables table `raw': Table does not exist (do you need to insmod?)
- sysinit: Perhaps iptables or your kernel needs to be upgraded.
- sysinit: touch: /etc/ethers: Read-only file system
- BusyBox v1.15.3 (2010-10-09 00:02:36 EDT) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
- Backfire (10.03, r23044) --------------------------
- * 1/3 shot Kahlua In a shot glass, layer Kahlua
- * 1/3 shot Bailey's on the bottom, then Bailey's,
- * 1/3 shot Vodka then Vodka.
- ---------------------------------------------------
- root@OpenWrt:/# df
- Filesystem 1K-blocks Used Available Use% Mounted on
- /dev/root 3624 3624 0 100% /
- tmpfs 30696 36 30660 0% /tmp
- root@OpenWrt:/# ps
- PID USER VSZ STAT COMMAND
- 1 root 1548 S init
- 2 root 0 SW [kthreadd]
- 3 root 0 SW [ksoftirqd/0]
- 4 root 0 SW [events/0]
- 5 root 0 SW [khelper]
- 8 root 0 SW [async/mgr]
- 47 root 0 SW [sync_supers]
- 49 root 0 SW [bdi-default]
- 51 root 0 SW [kblockd/0]
- 61 root 0 SW [cfg80211]
- 80 root 0 SW [kswapd0]
- 81 root 0 SW [aio/0]
- 82 root 0 SW [crypto/0]
- 110 root 0 SW [mtdblock0]
- 115 root 0 SW [mtdblock1]
- 120 root 0 SW [mtdblock2]
- 125 root 0 SW [mtdblock3]
- 131 root 0 SW [phy0]
- 149 root 1540 S /bin/sh /etc/init.d/rcS S boot
- 151 root 1540 S logger -s -p 6 -t sysinit
- 152 root 1544 S /bin/ash --login
- 161 root 1532 S klogd
- 604 root 1552 S udhcpc -t 0 -i eth1 -b -p /var/run/dhcp-eth1.pid -O r
- 611 root 1536 S telnetd -l /bin/login.sh
- 627 root 1584 S /bin/sh /etc/rc.common /etc/rc.d/S50dropbear start
- 628 root 1268 R /usr/bin/dropbearkey -t dss -f /tmp/dropbear/dropbear
- 638 nobody 1000 S /usr/sbin/dnsmasq -K -D -y -Z -b -E -s lan -S /lan/ -
- 651 root 1540 R ps
- root@OpenWrt:/# ifconfig
- br-lan Link encap:Ethernet HWaddr 00:21:29:EF:53:F5
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:402 (402.0 B)
- eth0 Link encap:Ethernet HWaddr 00:21:29:EF:53:F5
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
- Interrupt:7
- eth1 Link encap:Ethernet HWaddr 00:21:29:EF:53:F6
- inet addr:10.42.43.10 Bcast:10.42.43.255 Mask:255.255.255.0
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:12 errors:0 dropped:0 overruns:0 frame:0
- TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:1797 (1.7 KiB) TX bytes:1510 (1.4 KiB)
- Interrupt:8
- lo Link encap:Local Loopback
- inet addr:127.0.0.1 Mask:255.0.0.0
- UP LOOPBACK RUNNING MTU:16436 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
- root@OpenWrt:/# sysinit: mv: cannot remove '/etc/dropbear/dropbear_dss_host_key': Read-only file system
- sysinit: mv: cannot remove '/etc/dropbear/dropbear_rsa_host_key': Read-only file system
- sysinit: chown: /etc/dropbear: Read-only file system
- sysinit: chmod: /etc/dropbear: Read-only file system
- root@OpenWrt:/# uname -a
- Linux OpenWrt 2.6.35.7adm8668-1 #46 PREEMPT Tue Oct 12 22:14:42 EDT 2010 mips GNU/Linux
- root@OpenWrt:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement