Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Allocated 4096 bytes for 4 pacas at c00000000ffff000
- Using Cyrus machine description
- MMU: Supported page sizes
- 4 KB as direct
- 1024 KB as direct
- 2048 KB as direct
- 4096 KB as direct
- 16384 KB as direct
- 65536 KB as direct
- 262144 KB as direct
- 1048576 KB as direct
- MMU: Book3E HW tablewalk not supported
- No /soc@ffe000000/qman@318000 property 'fsl,qman-fqd', using memblock_alloc(0000000000400000)
- No /soc@ffe000000/qman@318000 property 'fsl,qman-pfdr', using memblock_alloc(0000000002000000)
- Qman ver:0a01,01,02
- No /soc@ffe000000/bman@31a000 property 'fsl,bman-fbpr', using memblock_alloc(0000000001000000)
- Bman ver:0a02,01,00
- pme: No /soc@ffe000000/pme@316000 property 'fsl,pme-pdsr', using memblock_alloc(0x0000000001000000)
- pme: No /soc@ffe000000/pme@316000 property 'fsl,pme-sre', using memblock_alloc(0x0000000000a00000)
- No USDPAA memory, no 'usdpaa_mem' bootarg
- Found legacy serial port 0 for /soc@ffe000000/serial@11c500
- mem=ffe11c500, taddr=ffe11c500, irq=0, clk=399000000, speed=0
- Found legacy serial port 1 for /soc@ffe000000/serial@11c600
- mem=ffe11c600, taddr=ffe11c600, irq=0, clk=399000000, speed=0
- Found legacy serial port 2 for /soc@ffe000000/serial@11d500
- mem=ffe11d500, taddr=ffe11d500, irq=0, clk=399000000, speed=0
- Found legacy serial port 3 for /soc@ffe000000/serial@11d600
- mem=ffe11d600, taddr=ffe11d600, irq=0, clk=399000000, speed=0
- CPU maps initialized for 1 thread per core
- (thread shift is 0)
- Starting Linux PPC64 #14 SMP Sat Oct 25 16:31:22 UTC 2014
- -----------------------------------------------------
- ppc64_pft_size = 0x0
- physicalMemorySize = 0x200000000
- ppc64_caches.dcache_line_size = 0x40
- ppc64_caches.icache_line_size = 0x40
- -----------------------------------------------------
- Linux version 3.8.13-rt9_daz_Cyrus_01-g0cb6dd4-dirty (cyrus@cyrus) (gcc version 4.6.3 (Debian 4.6.3-14) ) #14 SMP Sat Oct 25 16:31:22 UTC 2014
- [boot]0012 Setup Arch
- Cyrus board from Varisys
- Top of RAM: 0x200000000, Total RAM: 0x200000000
- Memory hole size: 0MB
- Zone ranges:
- DMA [mem 0x00000000-0x7fffffff]
- Normal [mem 0x80000000-0x1ffffffff]
- Movable zone start for each node
- Early memory node ranges
- node 0: [mem 0x00000000-0x1ffffffff]
- On node 0 totalpages: 2097152
- free_area_init_node: node 0, pgdat c000000000f5df00, node_mem_map c000000003ff2000
- DMA zone: 7168 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 517120 pages, LIFO batch:31
- Normal zone: 21504 pages used for memmap
- Normal zone: 1551360 pages, LIFO batch:31
- MMU: Allocated 2112 bytes of context maps for 255 contexts
- [boot]0015 Setup Done
- PERCPU: Embedded 11 pages/cpu @c00000000b100000 s14656 r0 d30400 u524288
- pcpu-alloc: s14656 r0 d30400 u524288 alloc=1*1048576
- pcpu-alloc: [0] 0 1
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2068480
- Kernel command line: root=/dev/sda6
- PID hash table entries: 4096 (order: 3, 32768 bytes)
- Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- Memory: 8097368k/8388608k available (15408k kernel code, 291240k reserved, 1380k data, 1006k bss, 376k init)
- Hierarchical RCU implementation.
- RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
- NR_IRQS:512 nr_irqs:512 16
- mpic: Resetting
- mpic: Setting up MPIC " OpenPIC " version 1.2 at ffe040000, max 2 CPUs
- mpic: ISU size: 512, shift: 9, mask: 1ff
- mpic: Initializing for 512 sources
- time_init: decrementer frequency = 24.937500 MHz
- time_init: processor frequency = 1995.000000 MHz
- clocksource: timebase mult[2819aa06] shift[24] registered
- clockevent: decrementer mult[6624dd3] shift[32] cpu[0]
- Console: colour dummy device 80x25
- console [tty0] enabled
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 256
- mpic: requesting IPIs...
- e500 family performance monitor hardware support registered
- Brought up 2 CPUs
- devtmpfs: initialized
- xor: measuring software checksum speed
- 8regs : 4245.000 MB/sec
- 8regs_prefetch: 3701.000 MB/sec
- 32regs : 3712.000 MB/sec
- 32regs_prefetch: 3571.000 MB/sec
- xor: using function: 8regs (4245.000 MB/sec)
- NET: Registered protocol family 16
- software IO TLB [mem 0x0bd8b000-0x0fd8b000] (64MB) mapped at [c00000000bd8b000-c00000000fd8afff]
- PCI: Probing PCI hardware
- PCI: Probing PCI hardware done
- bio: create slab <bio-0> at 0
- raid6: int64x1 746 MB/s
- raid6: int64x2 1200 MB/s
- raid6: int64x4 1670 MB/s
- raid6: int64x8 1487 MB/s
- raid6: using algorithm int64x4 (1670 MB/s)
- raid6: using intx1 recovery algorithm
- vgaarb: loaded
- SCSI subsystem initialized
- libata version 3.00 loaded.
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- Bman err interrupt handler present
- Bman portal initialised, cpu 0
- Bman portal initialised, cpu 1
- Bman portals initialised
- Qman err interrupt handler present
- QMan: Allocated lookup table at 8000000000000000, entry count 65537
- Qman portal initialised, cpu 0
- Qman portal initialised, cpu 1
- Qman portals initialised
- Bman: BPID allocator includes range 32:32
- Qman: FQID allocator includes range 256:256
- Qman: FQID allocator includes range 32768:32768
- Qman: CGRID allocator includes range 0:256
- Qman: pool channel allocator includes range 33:15
- Advanced Linux Sound Architecture Driver Initialized.
- Switching to clocksource timebase
- NET: Registered protocol family 2
- TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 65536 bind 65536)
- TCP: reno registered
- UDP hash table entries: 4096 (order: 5, 131072 bytes)
- UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- PCI: CLS 0 bytes, default 64
- Setting up Freescale MSI support
- Setting up Freescale MSI support
- Setting up Freescale MSI support
- fsl-rcpm ffe0e2000.global-utilities: Freescale RCPM driver
- Found FSL PCI host bridge at 0x0000000ffe200000. Firmware bus number: 0->1
- PCI host bridge /pcie@ffe200000 (primary) ranges:
- MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000
- IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000
- /pcie@ffe200000: PCICSRBAR @ 0xdf000000
- /pcie@ffe200000: Setup 64-bit PCI DMA window
- /pcie@ffe200000: DMA window size is 0xdf000000
- fsl-pci ffe200000.pcie: PCI host bridge to bus 0000:00
- pci_bus 0000:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff])
- pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff])
- pci_bus 0000:00: root bus resource [bus 00-01]
- pci_bus 0000:00: busn_res: [bus 00-01] end is updated to ff
- pci 0000:00:00.0: [1957:0421] type 01 class 0x0b2000
- pci 0000:00:00.0: reg 10: [mem 0xdf000000-0xdfffffff]
- pci 0000:00:00.0: supports D1 D2
- pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:01:00.0: [1002:6739] type 00 class 0x030000
- pci 0000:01:00.0: reg 10: [mem 0xc00000000-0xc0fffffff 64bit pref]
- pci 0000:01:00.0: reg 18: [mem 0xc10000000-0xc1001ffff 64bit]
- pci 0000:01:00.0: reg 20: [io 0x11000-0x110ff]
- pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
- pci 0000:01:00.0: supports D1 D2
- pci 0000:01:00.1: [1002:aa88] type 00 class 0x040300
- pci 0000:01:00.1: reg 10: [mem 0xc10020000-0xc10023fff 64bit]
- pci 0000:01:00.1: supports D1 D2
- pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- pci 0000:00:00.0: bridge window [io 0x11000-0x11fff]
- pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc100fffff]
- pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
- pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
- vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
- PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap
- PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff]
- pci 0000:00:00.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 01] add_size 200000
- pci 0000:00:00.0: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
- pci 0000:00:00.0: BAR 0: can't assign mem (size 0x1000000)
- pci 0000:00:00.0: BAR 9: can't assign mem pref (size 0x300000)
- pci 0000:01:00.0: BAR 6: assigned [mem 0xc10040000-0xc1005ffff pref]
- pci 0000:00:00.0: PCI bridge to [bus 01]
- pci 0000:00:00.0: bridge window [io 0x10000-0x1ffff]
- pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc1fffffff]
- pci_bus 0000:00: resource 4 [io 0x10000-0x1ffff]
- pci_bus 0000:00: resource 5 [mem 0xc00000000-0xc1fffffff]
- pci_bus 0000:01: resource 0 [io 0x10000-0x1ffff]
- pci_bus 0000:01: resource 1 [mem 0xc00000000-0xc1fffffff]
- Found FSL PCI host bridge at 0x0000000ffe201000. Firmware bus number: 0->8
- PCI host bridge /pcie@ffe201000 ranges:
- MEM 0x0000000c20000000..0x0000000c3fffffff -> 0x00000000e0000000
- IO 0x0000000ff8010000..0x0000000ff801ffff -> 0x0000000000000000
- /pcie@ffe201000: PCICSRBAR @ 0xdf000000
- /pcie@ffe201000: Setup 64-bit PCI DMA window
- /pcie@ffe201000: DMA window size is 0xdf000000
- fsl-pci ffe201000.pcie: PCI host bridge to bus 0001:00
- pci_bus 0001:00: root bus resource [io 0x21000-0x30fff] (bus address [0x0000-0xffff])
- pci_bus 0001:00: root bus resource [mem 0xc20000000-0xc3fffffff] (bus address [0xe0000000-0xffffffff])
- pci_bus 0001:00: root bus resource [bus 00-08]
- pci_bus 0001:00: busn_res: [bus 00-08] end is updated to ff
- pci 0001:00:00.0: [1957:0421] type 01 class 0x0b2000
- pci 0001:00:00.0: reg 10: [mem 0xdf000000-0xdfffffff]
- pci 0001:00:00.0: supports D1 D2
- pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0001:01:00.0: [111d:8092] type 01 class 0x060400
- pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
- pci 0001:00:00.0: PCI bridge to [bus 01-ff]
- pci 0001:00:00.0: bridge window [io 0x22000-0x22fff]
- pci 0001:00:00.0: bridge window [mem 0xc20000000-0xc200fffff]
- pci 0001:02:01.0: [111d:8092] type 01 class 0x060400
- pci 0001:02:01.0: PME# supported from D0 D3hot D3cold
- pci 0001:02:02.0: [111d:8092] type 01 class 0x060400
- pci 0001:02:02.0: PME# supported from D0 D3hot D3cold
- pci 0001:02:03.0: [111d:8092] type 01 class 0x060400
- pci 0001:02:03.0: PME# supported from D0 D3hot D3cold
- pci 0001:02:08.0: [111d:8092] type 01 class 0x060400
- pci 0001:02:08.0: PME# supported from D0 D3hot D3cold
- pci 0001:02:10.0: [111d:8092] type 01 class 0x060400
- pci 0001:02:10.0: PME# supported from D0 D3hot D3cold
- pci 0001:01:00.0: PCI bridge to [bus 02-ff]
- pci 0001:01:00.0: bridge window [io 0x22000-0x22fff]
- pci 0001:01:00.0: bridge window [mem 0xc20000000-0xc200fffff]
- pci 0001:03:00.0: [12d8:e111] type 01 class 0x060400
- pci 0001:03:00.0: PME# supported from D0 D3hot D3cold
- pci 0001:02:01.0: PCI bridge to [bus 03-ff]
- pci 0001:02:01.0: bridge window [io 0x22000-0x22fff]
- pci 0001:02:01.0: bridge window [mem 0xc20000000-0xc200fffff]
- pci 0001:04:04.0: [10ec:8139] type 00 class 0x020000
- pci 0001:04:04.0: reg 10: [io 0x22000-0x220ff]
- pci 0001:04:04.0: reg 14: [mem 0xc20000000-0xc200000ff]
- pci 0001:04:04.0: supports D1 D2
- pci 0001:04:04.0: PME# supported from D1 D2 D3hot D3cold
- pci 0001:04:05.0: [1102:0002] type 00 class 0x040100
- pci 0001:04:05.0: reg 10: [io 0x22100-0x2211f]
- pci 0001:04:05.0: supports D1 D2
- pci 0001:04:05.1: [1102:7002] type 00 class 0x098000
- pci 0001:04:05.1: reg 10: [io 0x22120-0x22127]
- pci 0001:04:05.1: supports D1 D2
- pci 0001:03:00.0: PCI bridge to [bus 04-ff]
- pci 0001:03:00.0: bridge window [io 0x22000-0x22fff]
- pci 0001:03:00.0: bridge window [mem 0xc20000000-0xc200fffff]
- pci_bus 0001:04: busn_res: [bus 04-ff] end is updated to 04
- pci_bus 0001:03: busn_res: [bus 03-ff] end is updated to 04
- pci 0001:02:02.0: PCI bridge to [bus 05-ff]
- pci_bus 0001:05: busn_res: [bus 05-ff] end is updated to 05
- pci 0001:02:03.0: PCI bridge to [bus 06-ff]
- pci_bus 0001:06: busn_res: [bus 06-ff] end is updated to 06
- pci 0001:02:08.0: PCI bridge to [bus 07-ff]
- pci_bus 0001:07: busn_res: [bus 07-ff] end is updated to 07
- pci 0001:02:10.0: PCI bridge to [bus 08-ff]
- pci_bus 0001:08: busn_res: [bus 08-ff] end is updated to 08
- pci_bus 0001:02: busn_res: [bus 02-ff] end is updated to 08
- pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 08
- pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 08
- PCI: Cannot allocate resource region 0 of device 0001:00:00.0, will remap
- PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff]
- PCI 0001:00 Cannot reserve Legacy IO [io 0x21000-0x21fff]
- pci 0000:00:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
- pci 0001:00:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-08] add_size 200000
- pci 0000:00:00.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- pci 0000:00:00.0: BAR 9: can't assign mem pref (size 0x200000)
- pci 0001:00:00.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- pci 0001:00:00.0: BAR 0: can't assign mem (size 0x1000000)
- pci 0001:00:00.0: BAR 9: can't assign mem pref (size 0x200000)
- pci 0001:03:00.0: PCI bridge to [bus 04]
- pci 0001:03:00.0: bridge window [io 0x22000-0x22fff]
- pci 0001:03:00.0: bridge window [mem 0xc20000000-0xc200fffff]
- pci 0001:02:01.0: PCI bridge to [bus 03-04]
- pci 0001:02:01.0: bridge window [io 0x22000-0x22fff]
- pci 0001:02:01.0: bridge window [mem 0xc20000000-0xc200fffff]
- pci 0001:02:02.0: PCI bridge to [bus 05]
- pci 0001:02:03.0: PCI bridge to [bus 06]
- pci 0001:02:08.0: PCI bridge to [bus 07]
- pci 0001:02:10.0: PCI bridge to [bus 08]
- pci 0001:01:00.0: PCI bridge to [bus 02-08]
- pci 0001:01:00.0: bridge window [io 0x22000-0x22fff]
- pci 0001:01:00.0: bridge window [mem 0xc20000000-0xc200fffff]
- pci 0001:00:00.0: PCI bridge to [bus 01-08]
- pci 0001:00:00.0: bridge window [io 0x21000-0x30fff]
- pci 0001:00:00.0: bridge window [mem 0xc20000000-0xc3fffffff]
- pci_bus 0000:00: resource 4 [io 0x10000-0x1ffff]
- pci_bus 0000:00: resource 5 [mem 0xc00000000-0xc1fffffff]
- pci_bus 0000:01: resource 0 [io 0x10000-0x1ffff]
- pci_bus 0000:01: resource 1 [mem 0xc00000000-0xc1fffffff]
- pci_bus 0001:00: resource 4 [io 0x21000-0x30fff]
- pci_bus 0001:00: resource 5 [mem 0xc20000000-0xc3fffffff]
- pci_bus 0001:01: resource 0 [io 0x21000-0x30fff]
- pci_bus 0001:01: resource 1 [mem 0xc20000000-0xc3fffffff]
- pci_bus 0001:02: resource 0 [io 0x22000-0x22fff]
- pci_bus 0001:02: resource 1 [mem 0xc20000000-0xc200fffff]
- pci_bus 0001:03: resource 0 [io 0x22000-0x22fff]
- pci_bus 0001:03: resource 1 [mem 0xc20000000-0xc200fffff]
- pci_bus 0001:04: resource 0 [io 0x22000-0x22fff]
- pci_bus 0001:04: resource 1 [mem 0xc20000000-0xc200fffff]
- HugeTLB registered 1 MB page size, pre-allocated 0 pages
- HugeTLB registered 4 MB page size, pre-allocated 0 pages
- HugeTLB registered 16 MB page size, pre-allocated 0 pages
- HugeTLB registered 64 MB page size, pre-allocated 0 pages
- HugeTLB registered 256 MB page size, pre-allocated 0 pages
- HugeTLB registered 1 GB page size, pre-allocated 0 pages
- NFS: Registering the id_resolver key type
- Key type id_resolver registered
- Key type id_legacy registered
- NTFS driver 2.1.30 [Flags: R/O].
- msgmni has been set to 15815
- async_tx: api initialized (async)
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- fsl-raideng ffe320000.raideng: Freescale RAID Engine driver
- fsl-raideng ffe320000.raideng: Ver = 10100
- fsl-raideng ffe320000.raideng: RE mode is 80000000
- fsl-raideng ffe320000.raideng: Galois Field Polynomial is 1d000000
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36) is a 16550A
- serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36) is a 16550A
- serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37) is a 16550A
- serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37) is a 16550A
- ePAPR hypervisor byte channel driver
- Linux agpgart interface v0.103
- [drm] Initialized drm 1.1.0 20060810
- [drm] radeon defaulting to kernel modesetting.
- [drm] radeon kernel modesetting enabled.
- [drm] initializing kernel modesetting (BARTS 0x1002:0x6739 0x1462:0x2441).
- radeon: No coherent DMA available.
- [drm] register mmio base: 0x10000000
- [drm] register mmio size: 131072
- ATOM BIOS: 113
- radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
- radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
- [drm] Detected VRAM RAM=1024M, BAR=256M
- [drm] RAM width 256bits DDR
- [TTM] Zone kernel: Available graphics memory: 4048684 kiB
- [TTM] Zone dma32: Available graphics memory: 2097152 kiB
- [TTM] Initializing pool allocator
- [TTM] Initializing DMA pool allocator
- [drm] radeon: 1024M of VRAM memory ready
- [drm] radeon: 512M of GTT memory ready.
- [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [drm] Driver supports precise vblank timestamp query.
- radeon 0000:01:00.0: radeon: using MSI.
- [drm] radeon: irq initialized.
- [drm] GART: num cpu pages 131072, num gpu pages 131072
- [drm] probing gen 2 caps for device 1957:421 = 2/0
- [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
- [drm] Loading BARTS Microcode
- [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
- radeon 0000:01:00.0: WB enabled
- radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xc0000001f7867c00
- radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xc0000001f7867c0c
- [drm:r600_ring_test] *ERROR* radeon: ring 0 test failed (scratch(0x8504)=0xCAFEDEAD)
- radeon 0000:01:00.0: disabling GPU acceleration
- radeon 0000:01:00.0: c0000001f7db9000 unpin not necessary
- [drm] Radeon Display Connectors
- [drm] Connector 0:
- [drm] DP-1
- [drm] HPD4
- [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
- [drm] Encoders:
- [drm] DFP1: INTERNAL_UNIPHY2
- [drm] Connector 1:
- [drm] HDMI-A-1
- [drm] HPD3
- [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
- [drm] Encoders:
- [drm] DFP2: INTERNAL_UNIPHY2
- [drm] Connector 2:
- [drm] DVI-I-1
- [drm] HPD6
- [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
- [drm] Encoders:
- [drm] DFP3: INTERNAL_UNIPHY
- [drm] CRT1: INTERNAL_KLDSCP_DAC1
- [drm] Connector 3:
- [drm] DVI-D-1
- [drm] HPD1
- [drm] DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
- [drm] Encoders:
- [drm] DFP4: INTERNAL_UNIPHY1
- [drm] Internal thermal controller with fan control
- [drm] radeon: power management initialized
- [drm] fb mappable at 0xC00142000
- [drm] vram apper at 0xC00000000
- [drm] size 5787648
- [drm] fb depth is 24
- [drm] pitch is 6400
- Console: switching to colour frame buffer device 200x56
- radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
- radeon 0000:01:00.0: registered panic notifier
- [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
- brd: module loaded
- loop: module loaded
- Adaptec aacraid driver 1.2-0[29801]-ms
- st: Version 20101219, fixed bufsize 32768, s/g segs 256
- fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
- scsi0 : sata_fsl
- ata1: SATA max UDMA/133 irq 68
- fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
- scsi1 : sata_fsl
- ata2: SATA max UDMA/133 irq 69
- fsl_espi ffe110000.spi: master is unqueued, this is deprecated
- fsl_espi ffe110000.spi: at 0x80000800800ea000 (irq = 53)
- libphy: Fixed MDIO Bus: probed
- libphy: Freescale PowerQUICC MII Bus: probed
- libphy: Freescale XGMAC MDIO Bus: probed
- FMAN(0) Fifo size settings:
- - Total buffers available(512 - 256B/buffer)
- - Total throughput(2Gbps)
- - Max frame size(1522B)
- - 1G ports TX 2(12 bufs set (min: 12))
- - 1G ports RX 2(220 bufs set (min: 15))
- - OH-HC ports 4(8)
- - Shared extra buffers(16)
- ata2: Signature Update detected @ 0 msecs
- ata1: Signature Update detected @ 0 msecs
- FMAN(0) open dma settings:
- - Total open dma available(32)
- - 1G ports TX 2(7)
- - 1G ports RX 2(7)
- - OH-HC ports 4(1)
- - Shared extra open dma(0)
- FMAN(0) Tnums settings:
- - Total Tnums available(128)
- - 1G ports TX 2(29)
- - 1G ports RX 2(30)
- - OH-HC ports 4(2)
- - Shared extra tnums(2)
- Freescale FM module (Sep 27 2014:15:44:45), FMD API version 21.1.0
- Freescale FM Ports module (Sep 27 2014:15:44:49)
- dpaa_debugfs: FSL DPAA Ethernet debugfs entries ()
- fsl_mac: mac.c:416:mac_load() fsl_mac: FSL FMan MAC API based driver ()
- fsl_mac ffe4e6000.ethernet: FMan dTSEC version: 0x08240101
- fsl_mac ffe4e6000.ethernet: FMan MAC address: 00:50:c2:20:da:bf
- fsl_mac ffe4e8000.ethernet: FMan dTSEC version: 0x08240101
- fsl_mac ffe4e8000.ethernet: FMan MAC address: 00:50:c2:20:da:c0
- fsl_mac ffe4e0000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@e0000) failed
- fsl_mac: probe of ffe4e0000.ethernet failed with error -22
- fsl_dpa: FSL DPAA Ethernet driver ()
- fsl_dpa: Probed interface eth0
- fsl_dpa: Probed interface eth1
- fsl_dpa_shared: FSL DPAA Shared Ethernet driver ()
- fsl_dpa_proxy: FSL DPAA Proxy initialization driver ()
- fsl_oh: FSL FMan Offline Parsing port driver ()
- 8139too: 8139too Fast Ethernet driver 0.9.28
- 8139too 0001:04:04.0 eth2: RealTek RTL8139 at 0x8000080000022000, 00:e0:7d:90:3a:b5, IRQ 18
- fsl-of-srio ffe0c0000.rapidio: devm_request_mem_region failed
- fsl-of-srio: probe of ffe0c0000.rapidio failed with error -12
- fsl-of-dma ffe100300.dma: dma channel dma-uio0-0 initialized
- fsl-of-dma ffe100300.dma: dma channel dma-uio0-1 initialized
- fsl-of-dma ffe100300.dma: dma channel dma-uio0-2 initialized
- fsl-of-dma ffe100300.dma: dma channel dma-uio0-3 initialized
- fsl-of-dma ffe101300.dma: dma channel dma-uio1-0 initialized
- fsl-of-dma ffe101300.dma: dma channel dma-uio1-1 initialized
- fsl-of-dma ffe101300.dma: dma channel dma-uio1-2 initialized
- fsl-of-dma ffe101300.dma: dma channel dma-uio1-3 initialized
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci-pci: EHCI PCI platform driver
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
- fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
- fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000
- ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata1.00: ATA-8: WDC WD10EZRX-00L4HB0, 01.01A01, max UDMA/133
- ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 16/32)
- ata1.00: configured for UDMA/133
- fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
- hub 1-0:1.0: USB hub found
- scsi 0:0:0:0: Direct-Access ATA WDC WD10EZRX-00L 01.0 PQ: 0 ANSI: 5
- ata2.00: ATAPI: ATAPI iHBS312 2, PL16, max UDMA/100
- ata2.00: configured for UDMA/100
- hub 1-0:1.0: 1 port detected
- sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- sd 0:0:0:0: [sda] 4096-byte physical blocks
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
- fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
- fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000
- scsi 1:0:0:0: CD-ROM ATAPI iHBS312 2 PL16 PQ: 0 ANSI: 5
- fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
- sr0: scsi3-mmc drive: 16x/40x writer dvd-ram cd/rw xa/form2 cdda tray
- cdrom: Uniform CD-ROM driver Revision: 3.20
- sr 1:0:0:0: Attached scsi CD-ROM sr0
- hub 2-0:1.0: USB hub found
- sr 1:0:0:0: Attached scsi generic sg1 type 5
- hub 2-0:1.0: 1 port detected
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- sda: RDSK (512) sda1 (DOS^G)(res 2 spb 2) sda2 (DOS^G)(res 2 spb 2) sda3 (DOS^G)(res 2 spb 2) sda4 (DOS^G)(res 2 spb 4) sda5 (JXF^D)(res 2 spb 1) sda6 (EXT^C)(res 2 spb 2) sda7 (EXT^C)(res 2 spb 2) sda8 ((res 2 spb 2) sda9 (SWP^@)(res 2 spb 2)
- usbcore: registered new interface driver usbserial
- usbcore: registered new interface driver cp210x
- sd 0:0:0:0: [sda] Attached SCSI disk
- usbserial: USB Serial support registered for cp210x
- mousedev: PS/2 mouse device common for all mice
- i2c /dev entries driver
- mpc-i2c ffe118100.i2c: timeout 1000000 us
- mpc-i2c ffe119100.i2c: timeout 1000000 us
- rtc-ds1307 10-006f: rtc core: registered mcp7941x as rtc0
- rtc-ds1307 10-006f: 64 bytes nvram
- mpc-i2c ffe118000.i2c: timeout 1000000 us
- mpc-i2c ffe119000.i2c: timeout 1000000 us
- md: raid6 personality registered for level 6
- md: raid5 personality registered for level 5
- md: raid4 personality registered for level 4
- EDAC MC: Ver: 3.0.0
- sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- sdhci-pltfm: SDHCI platform and OF driver helper
- /soc@ffe000000/sdhc@114000: voltage-ranges unspecified
- mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- Freescale USDPAA process driver
- fsl-usdpaa: no region found
- Freescale USDPAA process IRQ driver
- fsl-pme ffe316000.pme: ver: 0x00100201
- Freescale pme2 db driver
- Freescale pme2 scan driver
- fsl-pme2-scan: device pme_scan registered
- fsl-of-rman ffe1e0000.rman: Of-device /soc@ffe000000/rman@1e0000 initialized
- mmc0: new high speed SD card at address 0002
- fsl-of-rman ffe1e0000.rman: RMan inbound block0 initialized.
- mmcblk0: mmc0:0002 00000 1.90 GiB
- fsl-of-rman ffe1e0000.rman: RMan inbound block1 initialized.
- mmcblk0: unknown partition table
- fsl-of-rman ffe1e0000.rman: RMan inbound block2 initialized.
- fsl-of-rman ffe1e0000.rman: RMan inbound block3 initialized.
- Freescale hypervisor management driver
- fsl-hv: no hypervisor found
- usb 1-1: new high-speed USB device number 2 using fsl-ehci
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 4 ports detected
- usb 2-1: new high-speed USB device number 2 using fsl-ehci
- hub 2-1:1.0: USB hub found
- hub 2-1:1.0: 4 ports detected
- usb 1-1.1: new high-speed USB device number 3 using fsl-ehci
- scsi2 : usb-storage 1-1.1:1.0
- usb 1-1.2: new high-speed USB device number 4 using fsl-ehci
- scsi3 : usb-storage 1-1.2:1.0
- usb 1-1.3: new low-speed USB device number 5 using fsl-ehci
- input: CHESEN USB Keyboard as /devices/ffe000000.soc/ffe210000.usb/fsl-ehci.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input0
- hid-generic 0003:0A81:0101.0001: input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-fsl-ehci.0-1.3/input0
- input: CHESEN USB Keyboard as /devices/ffe000000.soc/ffe210000.usb/fsl-ehci.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input1
- hid-generic 0003:0A81:0101.0002: input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-fsl-ehci.0-1.3/input1
- usb 1-1.4: new full-speed USB device number 6 using fsl-ehci
- input: USB USB Mouse as /devices/ffe000000.soc/ffe210000.usb/fsl-ehci.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input2
- hid-generic 0003:1D57:3109.0003: input: USB HID v1.11 Mouse [USB USB Mouse] on usb-fsl-ehci.0-1.4/input0
- input: USB USB Mouse as /devices/ffe000000.soc/ffe210000.usb/fsl-ehci.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input3
- hid-generic 0003:1D57:3109.0004: input: USB HID v1.11 Keyboard [USB USB Mouse] on usb-fsl-ehci.0-1.4/input1
- usb 2-1.2: new high-speed USB device number 3 using fsl-ehci
- hub 2-1.2:1.0: USB hub found
- hub 2-1.2:1.0: 2 ports detected
- usb 2-1.3: new high-speed USB device number 4 using fsl-ehci
- scsi4 : usb-storage 2-1.3:1.0
- hid-generic 0003:058F:6364.0005: device has no listeners, quitting
- usb 2-1.4: new high-speed USB device number 5 using fsl-ehci
- scsi 3:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6
- sd 3:0:0:0: Attached scsi generic sg2 type 0
- hub 2-1.4:1.0: USB hub found
- hub 2-1.4:1.0: 4 ports detected
- scsi 2:0:0:0: Direct-Access 1100 PQ: 0 ANSI: 4
- sd 2:0:0:0: Attached scsi generic sg3 type 0
- sd 2:0:0:0: [sdc] 31744000 512-byte logical blocks: (16.2 GB/15.1 GiB)
- sd 2:0:0:0: [sdc] Write Protect is off
- sd 2:0:0:0: [sdc] Mode Sense: 43 00 00 00
- sd 2:0:0:0: [sdc] No Caching mode page present
- sd 2:0:0:0: [sdc] Assuming drive cache: write through
- sd 2:0:0:0: [sdc] No Caching mode page present
- sd 2:0:0:0: [sdc] Assuming drive cache: write through
- sdc: sdc1
- sd 2:0:0:0: [sdc] No Caching mode page present
- sd 2:0:0:0: [sdc] Assuming drive cache: write through
- sd 2:0:0:0: [sdc] Attached SCSI removable disk
- scsi 4:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
- sd 4:0:0:0: Attached scsi generic sg4 type 0
- scsi 4:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
- sd 4:0:0:1: Attached scsi generic sg5 type 0
- sd 4:0:0:0: [sdd] Attached SCSI removable disk
- scsi 4:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
- sd 4:0:0:1: [sde] Attached SCSI removable disk
- sd 4:0:0:2: Attached scsi generic sg6 type 0
- scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
- sd 4:0:0:3: Attached scsi generic sg7 type 0
- sd 4:0:0:2: [sdf] Attached SCSI removable disk
- sd 4:0:0:3: [sdg] Attached SCSI removable disk
- hda-intel 0000:01:00.1: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
- hda-intel 0000:01:00.1: No response from codec, disabling MSI: last cmd=0x000f0000
- sd 3:0:0:0: [sdb] 7593984 512-byte logical blocks: (3.88 GB/3.62 GiB)
- sd 3:0:0:0: [sdb] Write Protect is off
- sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
- sd 3:0:0:0: [sdb] No Caching mode page present
- sd 3:0:0:0: [sdb] Assuming drive cache: write through
- sd 3:0:0:0: [sdb] No Caching mode page present
- sd 3:0:0:0: [sdb] Assuming drive cache: write through
- sdb: RDSK (512) sdb1 (DOS^G)(res 2 spb 4) sdb2 (DOS^G)(res 2 spb 4)
- sd 3:0:0:0: [sdb] No Caching mode page present
- sd 3:0:0:0: [sdb] Assuming drive cache: write through
- sd 3:0:0:0: [sdb] Attached SCSI removable disk
- hda-intel 0000:01:00.1: Codec #0 probe error; disabling it...
- hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503
- usbcore: registered new interface driver snd-usb-audio
- oprofile: using ppc/e500mc performance monitoring.
- IPv4 over IPv4 tunneling driver
- TCP: cubic registered
- Initializing XFRM netlink socket
- NET: Registered protocol family 10
- sit: IPv6 over IPv4 tunneling driver
- NET: Registered protocol family 17
- NET: Registered protocol family 15
- Key type dns_resolver registered
- fsl_dpa_macless: FSL DPAA MACless Ethernet driver ()
- rtc-ds1307 10-006f: setting system clock to 2015-03-06 20:49:34 UTC (1425674974)
- ALSA device list:
- #0: Loopback 1
- #1: SB Live! [Unknown] (rev.10, serial:0x80671102) at 0x22100, irq 19
- #2: HD-Audio Generic at 0xc10020000 irq 27
- md: Waiting for all devices to be available before autodetect
- md: If you don't use raid, use raid=noautodetect
- md: Autodetecting RAID arrays.
- md: Scanned 0 and added 0 devices.
- md: autorun ...
- md: ... autorun DONE.
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (sda6): mounted filesystem with ordered data mode
- VFS: Mounted root (ext3 filesystem) readonly on device 8:6.
- devtmpfs: mounted
- Freeing unused kernel memory: 376k freed
- udevd[1794]: starting version 175
- EXT3-fs (sda6): using internal journal
- Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- Program Xorg tried to access /dev/mem between f8000000->f8020000.
- 8139too 0001:04:04.0 eth2: link up, 100Mbps, full-duplex, lpa 0x45E1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement