Advertisement
Guest User

Untitled

a guest
Nov 21st, 2013
116
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 3.91 KB | None | 0 0
  1. Manufacture Date: 08-30-2007
  2. Copyright (C) 2000, 2001, 2002, 2003, 2004, 2007 Free Software Foundation, Inc.
  3. Copyright (C) 2004 - 2008 Gateworks Corporation
  4.  
  5. RAM: 0x00000000-0x04000000, [0x00029f80-0x03fc1000] available
  6. FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
  7. == Executing boot script in 5.000 seconds - enter ^C to abort
  8. RedBoot> ip -h 10.42.1.1 -l 10.42.1.11
  9. IP: 10.42.1.11/255.255.255.0, Gateway: 0.0.0.0
  10. Default server: 10.42.1.1
  11. RedBoot> load -b 0x200000 kernel-nfs
  12. Using default protocol (TFTP)
  13. Address offset = 0x40000000
  14. Entry point: 0x00200100, address range: 0x00200000-0x0067a0a8
  15. RedBoot> go
  16. KDB: debugger backends: ddb
  17. KDB: current backend: ddb
  18. Copyright (c) 1992-2012 The FreeBSD Project.
  19. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  20. The Regents of the University of California. All rights reserved.
  21. FreeBSD is a registered trademark of The FreeBSD Foundation.
  22. FreeBSD 9.1-RELEASE #14: Sat Oct 19 13:39:32 CEST 2013
  23. root@gateworks:/usr/obj/arm.armeb/usr/src/sys/AVILA arm
  24. CPU: IXP425 533MHz rev 1 (ARMv5TE) (XScale core)
  25. DC enabled IC enabled WB enabled LABT branch prediction enabled
  26. 32KB/32B 32-way Instruction cache
  27. 32KB/32B 32-way write-back-locking Data cache
  28. real memory = 67108864 (64 MB)
  29. avail memory = 57380864 (54 MB)
  30. ixp0: <Intel IXP4XX> on motherboard
  31. ixp0: 37fff<RCOMP,USB,HASH,AES,DES,HDLC,AAL,HSS,UTOPIA,ETH0,ETH1,PCI>
  32. pcib0: <IXP4XX PCI Bus> on ixp0
  33. pci0: <PCI bus> on pcib0
  34. ath0: <Atheros 9280> irq 28 at device 1.0 on pci0
  35. ath0: AR9280 mac 128.2 RF5133 phy 13.0
  36. ath1: <Atheros 2413> irq 27 at device 2.0 on pci0
  37. ath1: AR2413 mac 7.8 RF2413 phy 4.5
  38. ixpclk0: <IXP4XX Timer> on ixp0
  39. ixpiic0: <IXP4XX GPIO-Based I2C Interface> on ixp0
  40. iicbb0: <I2C bit-banging driver> on ixpiic0
  41. iicbus0: <Philips I2C bus> on iicbb0 master-only
  42. iic0: <I2C generic I/O> on iicbus0
  43. ad74180: <Analog Devices AD7418 ADC> at addr 0x50 on iicbus0
  44. ds1672_rtc0: <Dallas Semiconductor DS1672 RTC> at addr 0xd0 on iicbus0
  45. ixpwdog0: <IXP4XX Watchdog Timer> on ixp0
  46. uart0: <Non-standard ns8250 class UART with FIFOs> on ixp0
  47. uart0: console (115200,n,8,1)
  48. uart1: <Non-standard ns8250 class UART with FIFOs> on ixp0
  49. ixpqmgr0: <IXP4XX Q-Manager> on ixp0
  50. npe0: <IXP NPE-B> on ixp0
  51. npe0: MAC at 0xc8009000
  52. npe0: MII at 0xc8009000
  53. npe0: load fw image IXP425.NPE-B Func 0x2 Rev 2.1
  54. miibus0: <MII bus> on npe0
  55. ukphy0: <Generic IEEE 802.3u media interface> PHY 2 on miibus0
  56. ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
  57. npe0: Ethernet address: 00:d0:12:03:59:23
  58. npe1: <IXP NPE-C> on ixp0
  59. npe1: MAC at 0xc800a000
  60. npe1: MII at 0xc8009000
  61. npe1: load fw image IXP425.NPE-C Func 0x5 Rev 2.1
  62. miibus1: <MII bus> on npe1
  63. ukphy1: <Generic IEEE 802.3u media interface> PHY 5 on miibus1
  64. ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
  65. npe1: Ethernet address: 00:d0:12:13:59:23
  66. cfi0: <Intel/Sharp - 16MB> on ixp0
  67. cfid0 on cfi0
  68. ata_avila0: <Gateworks Avila IDE/CF Controller> on ixp0
  69. ata0: <ATA channel 0> on ata_avila0
  70. led_avila0: <Gateworks Avila Front Panel LED> on ixp0
  71. gpio_avila0: <Gateworks Avila GPIO driver> on ixp0
  72. gpioc0: <GPIO controller> on gpio_avila0
  73. gpiobus0: <GPIO bus> on gpio_avila0
  74. Timecounter "IXP4XX Timer" frequency 66666600 Hz quality 1000
  75. Timecounters tick every 10.000 msec
  76. (aprobe0:ata0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00
  77. (aprobe0:ata0:0:0:0): CAM status: Command timeout
  78. (aprobe0:ata0:0:0:0): Error 5, Retry was blocked
  79. run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_register_async
  80. (aprobe0:ata0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00
  81. (aprobe0:ata0:0:0:0): CAM status: Command timeout
  82. (aprobe0:ata0:0:0:0): Error 5, Retry was blocked
  83. bootpc_init: wired to interface 'npe1'
  84. Sending DHCP Discover packet from interface npe1 (00:d0:12:13:59:23)
  85. npe1: link state changed to DOWN
  86. DHCP/BOOTP timeout for server 255.255.255.255
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement