Advertisement
Guest User

mb77.07 3.19.2 boot

a guest
Mar 28th, 2015
300
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.01 KB | None | 0 0
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Initializing cgroup subsys cpuacct
  5. [ 0.000000] Linux version 3.19.2-shadow1 (vlad@vlad) (gcc version 4.8.4 (Buildroot 2015.02-git-00957-gf0ea0e7) ) #13 Sat Mar 28 19:51:13 MSK 2015
  6. [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  7. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  8. [ 0.000000] Machine model: Module MB77.07
  9. [ 0.000000] bootconsole [earlycon0] enabled
  10. [ 0.000000] Memory policy: Data cache writeback
  11. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  12. [ 0.000000] Kernel command line: console=ttyS0,38400n8 earlyprintk=serial console=ttyS0,38400n8 ubi.mtd=4,2048 root=ubi0:rootfs rootfstype=ubifs mtdparts=0:0x00040000(boot),0x00020000(env),0x00020000(dtb),0x00400000(kernel),0x3FB8000
  13. 0(rootfs)
  14. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  15. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  16. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  17. [ 0.000000] Memory: 122780K/131072K available (4082K kernel code, 311K rwdata, 1972K rodata, 152K init, 526K bss, 8292K reserved, 0K cma-reserved)
  18. [ 0.000000] Virtual kernel memory layout:
  19. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  20. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  21. [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
  22. [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
  23. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  24. [ 0.000000] .text : 0xc0008000 - 0xc05f1c40 (6056 kB)
  25. [ 0.000000] .init : 0xc05f2000 - 0xc0618000 ( 152 kB)
  26. [ 0.000000] .data : 0xc0618000 - 0xc0665d68 ( 312 kB)
  27. [ 0.000000] .bss : 0xc0665d68 - 0xc06e9690 ( 527 kB)
  28. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  29. [ 0.000000] NR_IRQS:128
  30. [ 0.000000] VIC @f8000000: id 0x00041192, vendor 0x41
  31. [ 0.000000] VIC @f8010000: id 0x00041192, vendor 0x41
  32. [ 0.000000] sched_clock: 32 bits at 54MHz, resolution 18ns, wraps every 79536431085ns
  33. [ 0.000053] irq 5
  34. [ 0.006142] DIT: Timer system initialized
  35. [ 0.019176] Console: colour dummy device 80x30
  36. [ 0.032877] Calibrating delay loop... 321.94 BogoMIPS (lpj=1609728)
  37. [ 0.104511] pid_max: default: 32768 minimum: 301
  38. [ 0.118993] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  39. [ 0.139202] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  40. [ 0.162750] Initializing cgroup subsys devices
  41. [ 0.176485] Initializing cgroup subsys freezer
  42. [ 0.190168] Initializing cgroup subsys blkio
  43. [ 0.203410] CPU: Testing write buffer coherency: ok
  44. [ 0.219153] Setting up static identity map for 0x403dd418 - 0x403dd450
  45. [ 0.247419] devtmpfs: initialized
  46. [ 0.261590] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  47. [ 0.287008] pinctrl core: initialized pinctrl subsystem
  48. [ 0.312478] NET: Registered protocol family 16
  49. [ 0.328072] DMA: preallocated 256 KiB pool for atomic coherent allocations
  50. [ 0.356885] ADDDD
  51. [ 0.363175] hardcode
  52. [ 0.371369] ADDDD
  53. [ 0.377742] hardcode
  54. [ 0.387144] ADDDD
  55. [ 0.394552] ADDDD
  56. [ 0.402384] ADDDD
  57. [ 0.409361] ADDDD
  58. [ 0.424059] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  59. [ 0.444792] hw-breakpoint: maximum watchpoint size is 4 bytes.
  60. [ 0.593724] SCSI subsystem initialized
  61. [ 0.605720] ssp-pl022 2002e000.ssp: ARM PL022 driver, device ID: 0x00041022
  62. [ 0.627105] ssp-pl022 2002e000.ssp: mapped registers from 0x2002e000 to f802e000
  63. [ 0.655996] usbcore: registered new interface driver usbfs
  64. [ 0.673308] usbcore: registered new interface driver hub
  65. [ 0.689871] usbcore: registered new device driver usb
  66. [ 0.705940] media: Linux media interface: v0.10
  67. [ 0.720215] Linux video capture interface: v2.00
  68. [ 0.735437] Advanced Linux Sound Architecture Driver Initialized.
  69. [ 0.756913] Switched to clocksource timer
  70. [ 0.814847] NET: Registered protocol family 2
  71. [ 0.830505] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  72. [ 0.851828] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  73. [ 0.871267] TCP: Hash tables configured (established 1024 bind 1024)
  74. [ 0.890834] TCP: reno registered
  75. [ 0.900868] UDP hash table entries: 256 (order: 0, 4096 bytes)
  76. [ 0.918760] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  77. [ 0.938558] NET: Registered protocol family 1
  78. [ 0.953081] RPC: Registered named UNIX socket transport module.
  79. [ 0.971211] RPC: Registered udp transport module.
  80. [ 0.985657] RPC: Registered tcp transport module.
  81. [ 1.000072] RPC: Registered tcp NFSv4.1 backchannel transport module.
  82. [ 1.023949] futex hash table entries: 256 (order: -1, 3072 bytes)
  83. [ 1.145374] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  84. [ 1.169290] NFS: Registering the id_resolver key type
  85. [ 1.184981] Key type id_resolver registered
  86. [ 1.197871] Key type id_legacy registered
  87. [ 1.210299] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  88. [ 1.239700] alg: No test for stdrng (krng)
  89. [ 1.252653] io scheduler noop registered (default)
  90. [ 1.267734] rcm-pinmux 20033084.sysconfigh: DVB_CI mode is GPIO (0)
  91. [ 1.286919] rcm-pinmux 20033084.sysconfigh: TS1 mode is GPIO (0)
  92. [ 1.305283] rcm-pinmux 20033084.sysconfigh: TS2 mode is GPIO (0)
  93. [ 1.323630] rcm-pinmux 20033084.sysconfigh: NAND mode is peripheral (1)
  94. [ 1.344851] fj_gpio: Added 32 gpio lines at base 0
  95. [ 1.360656] pl061_gpio 2002a000.gpio: PL061 GPIO chip @0x2002a000 registered
  96. [ 1.382843] pl061_gpio 2002f000.gpio: PL061 GPIO chip @0x2002f000 registered
  97. [ 1.405048] pl061_gpio 20035000.gpio: PL061 GPIO chip @0x20035000 registered
  98. [ 1.427239] pl061_gpio 20036000.gpio: PL061 GPIO chip @0x20036000 registered
  99. [ 1.485567] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
  100. [ 1.512248] console [ttyS0] disabled
  101. [ 1.523423] 2002b000.uart: ttyS0 at MMIO 0x2002b000 (irq = 8, base_baud = 3375000) is a 8250
  102. [ 1.549138] console [ttyS0] enabled
  103. [ 1.549138] console [ttyS0] enabled
  104. [ 1.570357] bootconsole [earlycon0] disabled
  105. [ 1.570357] bootconsole [earlycon0] disabled
  106. [ 1.598307] 20022000.uart: ttyS1 at MMIO 0x20022000 (irq = 10, base_baud = 3375000) is a 8250
  107. [ 1.627066] 2002c000.uart: ttyS2 at MMIO 0x2002c000 (irq = 9, base_baud = 3375000) is a 8250
  108. [ 1.654020] [drm] Initialized drm 1.1.0 20060810
  109. [ 1.682024] loop: module loaded
  110. [ 1.691611] EasyNMC Unified DSP Framework. (c) RC Module 2014
  111. [ 1.709563] easynmc-nmc3: imem at phys 0x140000 virt 0xc8900000 size 0x80000 bytes
  112. [ 1.732386] easynmc-nmc3: HP IRQ 15 LP IRQ 16
  113. [ 1.745519] easynmc: registering core K1879-nmc (nmc3) with id 0
  114. [ 1.779996] mnand CS0 Samsung size(1024) writesize(2048) oobsize(64) erasesize(131072)
  115. [ 1.806955] mnand: Bad chip id or no chip at CS1
  116. [ 1.820902] mnand: Detected 1073741824 bytes of NAND
  117. [ 1.843580] libphy: greth-mdio: probed
  118. [ 3.479612] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  119. [ 3.499405] ehci-platform: EHCI generic platform driver
  120. [ 3.515539] ehci-platform 10040000.ehci: EHCI Host Controller
  121. [ 3.532992] ehci-platform 10040000.ehci: new USB bus registered, assigned bus number 1
  122. [ 3.557274] ehci-platform 10040000.ehci: irq 36, io mem 0x10040000
  123. [ 3.586297] ehci-platform 10040000.ehci: USB 2.0 started, EHCI 1.00
  124. [ 3.608637] hub 1-0:1.0: USB hub found
  125. [ 3.620386] hub 1-0:1.0: 2 ports detected
  126. [ 3.634974] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  127. [ 3.653726] ohci-platform: OHCI generic platform driver
  128. [ 3.670389] usbcore: registered new interface driver usb-storage
  129. [ 3.689253] usbcore: registered new interface driver usbserial
  130. [ 3.707207] usbcore: registered new interface driver cp210x
  131. [ 3.724308] usbserial: USB Serial support registered for cp210x
  132. [ 3.742519] usbcore: registered new interface driver ftdi_sio
  133. [ 3.760101] usbserial: USB Serial support registered for FTDI USB Serial Device
  134. [ 3.782726] usbcore: registered new interface driver emi26 - firmware loader
  135. [ 3.804328] usbcore: registered new interface driver emi62 - firmware loader
  136. [ 3.827621] mousedev: PS/2 mouse device common for all mice
  137. [ 3.846452] i2c /dev entries driver
  138. [ 3.871038] usbcore: registered new interface driver i2c-tiny-usb
  139. [ 3.890025] usbcore: registered new interface driver uvcvideo
  140. [ 3.907372] USB Video Class driver (1.1.1)
  141. [ 3.923281] sp805-wdt 20025000.wd: registration successful
  142. [ 3.941616] ledtrig-cpu: registered to indicate activity on CPUs
  143. [ 3.976546] usbcore: registered new interface driver usbhid
  144. [ 3.993362] usbhid: USB HID core driver
  145. [ 4.019444] ion-physmem: ION PhysMem Driver. (c) RC Module 2015
  146. [ 4.041416] ion-physmem: heap EM1 id 3 type 0 align 0x1000 at 0xc0000000 len 131072 KiB
  147. [ 4.066114] ion-physmem: heap IM0 id 3 type 0 align 0x1000 at 0x100000 len 256 KiB
  148. [ 4.094418] usbcore: registered new interface driver snd-usb-audio
  149. [ 4.113491] usbcore: registered new interface driver snd-ua101
  150. [ 4.131548] usbcore: registered new interface driver snd-usb-caiaq
  151. [ 4.150619] usbcore: registered new interface driver snd-usb-6fire
  152. [ 4.170105] TCP: cubic registered
  153. [ 4.180202] NET: Registered protocol family 17
  154. [ 4.194011] Key type dns_resolver registered
  155. [ 4.208122] usb 1-1: new high-speed USB device number 2 using ehci-platform
  156. [ 4.242389] UBI error: cannot open mtd 4, error -19
  157. [ 4.258581] ALSA device list:
  158. [ 4.268111] No soundcards found.
  159. [ 4.280153] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19
  160. [ 4.303005] VFS: Cannot open root device "ubi0:rootfs" or unknown-block(0,0): error -19
  161. [ 4.327082] Please append a correct "root=" boot option; here are the available partitions:
  162. [ 4.352244] 1f00 1048576 mtdblock0 (driver?)
  163. [ 4.367514] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  164. [ 4.392327] CPU: 0 PID: 1 Comm: swapper Not tainted 3.19.2-shadow1 #13
  165. [ 4.411903] Hardware name: Module MB77.07
  166. [ 4.424000] [<c0012d20>] (unwind_backtrace) from [<c0011070>] (show_stack+0x10/0x14)
  167. [ 4.447291] [<c0011070>] (show_stack) from [<c03d8254>] (panic+0x70/0x1c0)
  168. [ 4.467972] [<c03d8254>] (panic) from [<c05f3184>] (mount_block_root+0x208/0x250)
  169. [ 4.490457] [<c05f3184>] (mount_block_root) from [<c05f3358>] (prepare_namespace+0x88/0x178)
  170. [ 4.515808] [<c05f3358>] (prepare_namespace) from [<c05f2da4>] (kernel_init_freeable+0x1bc/0x204)
  171. [ 4.542469] [<c05f2da4>] (kernel_init_freeable) from [<c03d740c>] (kernel_init+0x8/0xe4)
  172. [ 4.566773] [<c03d740c>] (kernel_init) from [<c000e320>] (ret_from_fork+0x14/0x34)
  173. [ 4.589503] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement