Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <html><head><style> body { background-color: #000000; color: #ffffff; font-size: small; } </style></head><body>[ 0.000000] [0: swapper: 0] Booting Linux on physical CPU 0<br />[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu<br />[ 0.000000] [0: swapper: 0] Linux version 3.0.72-cyanogenmod-g888a0be (pinky-ghost@cyanogenmod) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Apr 29 17:15:55 PDT 2013<br />[ 0.000000] [0: swapper: 0] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d<br />[ 0.000000] [0: swapper: 0] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache<br />[ 0.000000] [0: swapper: 0] Machine: QCT MSM8X60 FUSION FFA<br />[ 0.000000] [0: swapper: 0] memory pool 0 (start 38000000 size 600000) initialized<br />[ 0.000000] [0: swapper: 0] memory pool 1 (start 38600000 size 3802000) initialized<br />[ 0.000000] [0: swapper: 0] memory pool 3 (start 79100000 size 6f00000) initialized<br />[ 0.000000] [0: swapper: 0] Memory policy: ECC disabled, Data cache writealloc<br />[ 0.000000] [0: swapper: 0] socinfo_init: v6, id=86, ver=2.0, raw_id=1697, raw_ver=1697, hw_plat=0, hw_plat_ver=65536<br />[ 0.000000] [0: swapper: 0] accessory_chip=0 hw_plat_subtype=0<br />[ 0.000000] [0: swapper: 0] sec_getlog_supply_meminfo: 40000000 40000000 0 0<br />[ 0.000000] [0: swapper: 0] allocating 12906496 bytes at c1c5d000 (4205d000 physical) for fb<br />[ 0.000000] [0: swapper: 0] PERCPU: Embedded 8 pages/cpu @c28af000 s9632 r8192 d14944 u32768<br />[ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 209672<br />[ 0.000000] [0: swapper: 0] Kernel command line: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c10 console=null sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13 androidboot.emmc=true androidboot.serialno=1e304cbe androidboot.baseband=csfb<br />[ 0.000000] [0: swapper: 0] (sec_dbg_setup)<br />[ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_base = 0x4020400c<br />[ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_size = 0x100000<br />[ 0.000000] hw_rev_setup : HW rev value is intialized first<br />[ 0.000000] HW rev value : 0xD<br />[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)<br />[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)<br />[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)<br />[ 0.000000] Memory: 43MB 760MB 24MB = 827MB total<br />[ 0.000000] Memory: 805268k/805268k available, 156268k reserved, 421888K highmem<br />[ 0.000000] Virtual kernel memory layout:<br />[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)<br />[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)<br />[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)<br />[ 0.000000] vmalloc : 0xdf800000 - 0xfa000000 ( 424 MB)<br />[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)<br />[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)<br />[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)<br />[ 0.000000] .init : 0xc0008000 - 0xc0059000 ( 324 kB)<br />[ 0.000000] .text : 0xc0100000 - 0xc0b745f8 (10706 kB)<br />[ 0.000000] .data : 0xc0c00000 - 0xc0cdebc0 ( 891 kB)<br />[ 0.000000] .bss : 0xc0cdebe4 - 0xc1334f94 (6489 kB)<br />[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1<br />[ 0.000000] Preemptible hierarchical RCU implementation.<br />[ 0.000000] NR_IRQS:855<br />[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms<br />[ 0.000000] Console: colour dummy device 80x30<br />[ 0.150177] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67656)<br />[ 0.150207] pid_max: default: 32768 minimum: 301<br />[ 0.150726] Mount-cache hash table entries: 512<br />[ 0.152038] Initializing cgroup subsys cpuacct<br />[ 0.152160] Initializing cgroup subsys freezer<br />[ 0.152221] CPU: Testing write buffer coherency: ok<br />[ 0.152526] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available<br />[ 0.184967] CPU1: Booted secondary processor<br />[ 0.194854] Brought up 2 CPUs<br />[ 0.194854] SMP: Total of 2 processors activated (27.06 BogoMIPS).<br />[ 0.207214] print_constraints: dummy: <br />[ 0.207305] rdev_init_debugfs: Error-Bad Function Input<br />[ 0.207611] NET: Registered protocol family 16<br />[ 0.207763] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver<br />[ 0.209289] (sec_get_lpm_mode) 1a2b3c10<br />[ 0.209320] (sec_get_lpm_mode) 1<br />[ 0.209320] (sec_debug_init)<br />[ 0.209350] (sec_debug_init) reset_reason : 0x1a2b3c10<br />[ 0.209350] msm_rpm_init: RPM firmware 2.0.1115<br />[ 0.209991] saw_probe: id=0, name=8901_s0<br />[ 0.210296] saw_probe: id=1, name=8901_s1<br />[ 0.211547] rcg_clk_handoff: gsbi12_uart_clk rate=3686400<br />[ 0.211608] rcg_clk_handoff: gsbi12_qup_clk rate=24000000<br />[ 0.211639] rcg_clk_handoff: sdc1_clk rate=48000000<br />[ 0.211700] rcg_clk_handoff: dsi_byte_clk rate=1<br />[ 0.211730] rcg_clk_handoff: mdp_clk rate=200000000<br />[ 0.211853] rcg_clk_handoff: pixel_mdp_clk rate=27400000<br />[ 0.213378] ACPU PVS: Slow<br />[ 0.213409] Max ACPU freq: 1512000 KHz<br />[ 0.218963] CPU0: 23 scaling frequencies supported.<br />[ 0.218963] CPU1: 23 scaling frequencies supported.<br />[ 0.219177] msm8x60_init_mmc : skip sdcc2 config for lpm boot<br />[ 0.219268] msm8x60_init_mmc : skip sdcc5 config for lpm boot<br />[ 0.219299] LTE_switch_init!<br />[ 0.219329] LTE_switch_init end!<br />[ 0.220428] pm8058_probe: PMIC revision: E3<br />[ 0.221466] pm_gpio_probe: OK: base=173, ngpio=40<br />[ 0.221618] pm8xxx_mpp_probe: OK: base=213, ngpio=12<br />[ 0.222686] pm8901_probe: PMIC REVISION = F4<br />[ 0.223022] pm8xxx_mpp_probe: OK: base=225, ngpio=4<br />[ 0.234161] ram_console: got buffer at 77800000, size 100000<br />[ 0.234252] ram_console: error in header, 1<br />[ 0.234252] ram_console: found existing buffer, size 32291, start 32291<br />[ 0.345031] console [ram-1] enabled<br />[ 0.345428] msm8x60_init : skip charm devices for lpm boot<br />[ 0.346313] pm8058_gpios_init PMIC_GPIO_EAR_DET : OK <br />[ 0.347045] tsp_power_init: MXT224 Power On skipped by LPM<br />[ 0.347167] brcm_wlan_init: start<br />[ 0.347290] brcm_init_wlan_mem: WIFI MEM Allocated<br />[ 0.362213] bio: create slab <bio-0> at 0<br />[ 0.363372] ION heap vmalloc created<br />[ 0.363494] ION heap mm created at 38800000 with size 3600000<br />[ 0.363616] ION heap mm_fw created at 38600000 with size 200000<br />[ 0.363739] ION heap mfc created at 3be00000 with size 2000<br />[ 0.363891] ION heap sf created at 79100000 with size 4000000<br />[ 0.363983] ION heap camera_preview created at 7d100000 with size 1200000<br />[ 0.364135] ION heap wb created at 7e300000 with size 1400000<br />[ 0.364227] ION heap qsecom created at 7f700000 with size 600000<br />[ 0.364379] ION heap audio created at 7fd00000 with size 28b000<br />[ 0.364532] pmic8058_pwm_probe: OK<br />[ 0.365051] SCSI subsystem initialized<br />[ 0.365325] usbcore: registered new interface driver usbfs<br />[ 0.365509] usbcore: registered new interface driver hub<br />[ 0.365692] usbcore: registered new device driver usb<br />[ 0.366088] i2c-gpio i2c-gpio.15: using pins 107 (SDA) and 101 (SCL)<br />[ 0.366363] i2c-gpio i2c-gpio.10: using pins 138 (SDA) and 139 (SCL)<br />[ 0.366607] i2c-gpio i2c-gpio.13: using pins 156 (SDA) and 157 (SCL)<br />[ 0.366821] i2c-gpio i2c-gpio.11: using pins 38 (SDA) and 39 (SCL)<br />[ 0.367095] i2c-gpio i2c-gpio.12: using pins 51 (SDA) and 52 (SCL)<br />[ 0.367309] i2c-gpio i2c-gpio.17: using pins 70 (SDA) and 94 (SCL)<br />[ 0.367584] i2c-gpio i2c-gpio.9: using pins 155 (SDA) and 154 (SCL)<br />[ 0.367797] Advanced Linux Sound Architecture Driver Version 1.0.24.<br />[ 0.368286] Bluetooth: Core ver 2.16<br />[ 0.368408] NET: Registered protocol family 31<br />[ 0.368530] Bluetooth: HCI device and connection manager initialized<br />[ 0.368621] Bluetooth: HCI socket layer initialized<br />[ 0.368743] Bluetooth: L2CAP socket layer initialized<br />[ 0.368957] Bluetooth: SCO socket layer initialized<br />[ 0.369476] cfg80211: Calling CRDA to update world regulatory domain<br />[ 0.369689] Switching to clocksource gp_timer<br />[ 0.382904] NET: Registered protocol family 2<br />[ 0.383148] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)<br />[ 0.383514] TCP established hash table entries: 65536 (order: 7, 524288 bytes)<br />[ 0.384216] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)<br />[ 0.384979] TCP: Hash tables configured (established 65536 bind 65536)<br />[ 0.385040] TCP reno registered<br />[ 0.385192] UDP hash table entries: 256 (order: 1, 8192 bytes)<br />[ 0.385253] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)<br />[ 0.385772] NET: Registered protocol family 1<br />[ 0.386169] RPC: Registered named UNIX socket transport module.<br />[ 0.386322] RPC: Registered udp transport module.<br />[ 0.386383] RPC: Registered tcp transport module.<br />[ 0.386474] RPC: Registered tcp NFSv4.1 backchannel transport module.<br />[ 0.386749] Trying to unpack rootfs image as initramfs...<br />[ 0.403137] Freeing initrd memory: 380K<br />[ 0.403442] PMU: registered new PMU device of type 0<br />[ 0.403625] PMU: registered new PMU device of type 1<br />[ 0.404144] ETM/ETB intialized.<br />[ 0.404327] pil_qdsp6v3 pil_qdsp6v3: using secure boot<br />[ 0.404632] pil_modem pil_modem: using secure boot<br />[ 0.404846] sdio_al:SDIO-AL SW version 1.30<br />[ 0.406707] smd_channel_probe_worker: allocation table not initialized<br />[ 0.410614] msm_dsps driver version 3.03.<br />[ 0.412933] lpa_if_init: lpa_if_ptr 0xdeb31200 buf_vir 0xffdf0000 buf_phy 0x5ef50000 buf_zise 65536<br />[ 0.414642] sec_switch_probe enter sec_switch_probe<br />[ 0.414825] gpio_request: gpio-230 (?) status -22<br />[ 0.414978] cfg_gpio_low_power: failed to sleep gpio 230: -22<br />[ 0.415039] gpio_request: gpio-236 (?) status -22<br />[ 0.415161] cfg_gpio_low_power: failed to sleep gpio 236: -22<br />[ 0.415252] gpio_request: gpio-237 (?) status -22<br />[ 0.415374] cfg_gpio_low_power: failed to sleep gpio 237: -22<br />[ 0.415435] gpio_request: gpio-240 (?) status -22<br />[ 0.415527] cfg_gpio_low_power: failed to sleep gpio 240: -22<br />[ 0.415588] gpio_request: gpio-244 (?) status -22<br />[ 0.415679] cfg_gpio_low_power: failed to sleep gpio 244: -22<br />[ 0.415802] gpio_request: gpio-245 (?) status -22<br />[ 0.415863] cfg_gpio_low_power: failed to sleep gpio 245: -22<br />[ 0.415985] gpio_request: gpio-258 (?) status -22<br />[ 0.416076] cfg_gpio_low_power: failed to sleep gpio 258: -22<br />[ 0.416198] gpio_request: gpio-282 (?) status -22<br />[ 0.416290] cfg_gpio_low_power: failed to sleep gpio 282: -22<br />[ 0.416412] gpio_request: gpio-291 (?) status -22<br />[ 0.416473] cfg_gpio_low_power: failed to sleep gpio 291: -22<br />[ 0.418273] msm_rpm_log_probe: OK<br />[ 0.418609] [BT] bcm4330_bluetooth_init <br />[ 0.418975] [BT] bcm4330_bluetooth_probe <br />[ 0.419372] printk_remap_nocache: sec_log_save_size 524288 at sec_log_save_base 0x40184008 <br />[ 0.419464] printk_remap_nocache: sec_log_reserve_size 524296 at sec_log_reserve_base 0x40184000 <br />[ 0.420227] sec_log_save_old: saved old log at 3145@de91b000<br />[ 0.424926] sec_getlog_supply_kloginfo: 0xc1115344<br />[ 0.502929] highmem bounce pool size: 64 pages<br />[ 0.503173] ashmem: initialized<br />[ 0.509307] fuse init (API version 7.16)<br />[ 0.509582] msgmni has been set to 749<br />[ 0.510986] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)<br />[ 0.511138] io scheduler noop registered<br />[ 0.511230] io scheduler deadline registered (default)<br />[ 0.511413] io scheduler cfq registered<br />[ 0.513671] mdp4_csc_config: Block type 10 isn't supported by CSC.<br />[ 0.513854] mdp4_csc_config: Block type 8 isn't supported by CSC.<br />[ 0.517547] ld9040 start lcdc_ld9040_panel_init<br />[ 0.517791] ld9040 start ld9040_probe: pdev->name:lcdc_ld9040_wvga<br />[ 0.517883] ld9040 msm_fb_add_device START<br />[ 0.518035] setting pdata->panel_info.fb_num to 3. type: 0<br />[ 0.518127] msm_fb_add_device: msm_fb_device_alloc failed!<br />[ 0.518280] ld9040 msm_fb_add_device end<br />[ 0.518585] ld9040 platform_driver_register(&this_driver) is done <br />[ 0.518707] ld9040 LDI : EA8868, pixelclock 27400000<br />[ 0.519042] setting pdata->panel_info.fb_num to 3. type: 3<br />[ 0.521850] mdp4_lcdc_vsync_init: ndx=0<br />[ 0.524108] pm_runtime: fail to wake up<br />[ 0.524139] [kmj] lcdc_LD9040_panel_power:enable:1<br />[ 0.525207] ld9040 lcdc_ld9040_panel_on + (0,0,0)<br />[ 0.525238] ld9040 : lcdc_config_gpios [1]<br />[ 0.525268] ld9040 start spi_init<br />[ 0.525299] ld9040 clk : 103, cs : 104, sdi : 106<br />[ 0.525329] ld9040 start ld9040_disp_powerup<br />[ 0.580291] ld9040 start ld9040_disp_on - HW Rev: 13<br />[ 0.710601] ld9040 ld9040_read_lcd_id: a1 3 22<br />[ 0.710601] ld9040 lcd EA8868 M3<br />[ 0.774017] ld9040 ACL_cutoff_set Percentage : 40!!<br />[ 0.775390] ld9040 ea8868_gamma_ctl 18 18<br />[ 0.775512] ld9040 lcdc_ld9040_panel_on - (1,1,1)<br />[ 0.776916] mdp4_csc_config: Block type 10 isn't supported by CSC.<br />[ 0.776947] mdp4_csc_config: Block type 8 isn't supported by CSC.<br />[ 0.800292] Console: switching to colour frame buffer device 60x50<br />[ 0.818420] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!<br />[ 0.818603] is_lpcharging_state: is_lpm_boot:1<br />[ 0.818695] [lpm-mode] skip init logo!<br />[ 0.819122] Registered led device: lcd-backlight<br />[ 0.819244] mdp4_lcdc_vsync_init: ndx=0<br />[ 0.819366] sec_getlog_supply_fbinfo: 0x4205d000 480 800 32 2<br />[ 0.819519] ld9040 platform_device_register(&this_device) is done <br />[ 0.820159] hdmi_msm hdmi_msm.0: probe<br />[ 0.820648] hdmi_msm hdmi_msm.1: probe<br />[ 0.820739] hdmi_msm hdmi_msm.1: Features <val:0x80004481, HDMI:ON, HDCP:ON><br />[ 0.821075] setting pdata->panel_info.fb_num to 1. type: 7<br />[ 0.821716] mdp4_dtv_vsync_init: ndx=0<br />[ 0.825775] FrameBuffer[1] 1920x1080 size=8294400 bytes is registered successfully!<br />[ 0.826080] mdp4_dtv_vsync_init: ndx=0<br />[ 0.826324] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group de1b2008<br />[ 0.826446] hdmi_msm hdmi_msm.1: external_common_state_create: kobject_uevent(KOBJ_ADD)<br />[ 0.826629] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled<br />[ 0.826904] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0<br />[ 0.827850] <br />[ 0.827880] msm_vidc_enc: Inside vid_enc_init()<br />[ 0.828186] <br />[ 0.828216] msm_vidc_enc: Inside vid_enc_vcd_init()<br />[ 0.828430] is_lpcharging_state: is_lpm_boot:1<br />[ 0.828643] sii9234_init : LPM Charging Mode! return 0<br />[ 0.901794] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART<br />[ 0.902465] msm_serial_hs module loaded<br />[ 0.902618] msm_serial_hsl: detected port #1<br />[ 0.902832] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM<br />[ 0.903350] msm_serial_hsl: detected port #0<br />[ 0.903564] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM<br />[ 0.904052] msm_serial_hsl: driver initialized<br />[ 0.905242] msm_rotator_probe: rotator_hw_revision=1<br />[ 0.911346] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU<br />[ 0.912963] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU<br />[ 0.914215] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU<br />[ 0.919372] brd: module loaded<br />[ 0.921661] loop: module loaded<br />[ 0.921966] is_lpcharging_state: is_lpm_boot:1<br />[ 0.922119] akm8975_init : LPM Charging Mode! return 0<br />[ 0.922210] is_lpcharging_state: is_lpm_boot:1<br />[ 0.922363] k3dh_init : LPM Charging Mode! return 0<br />[ 0.922546] sec_jack:sec_jack_probe : Registering jack driver<br />[ 0.922851] input: sec_jack as /devices/virtual/input/input0<br />[ 0.923706] pm8xxx_upl_probe: OK<br />[ 0.924743] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22<br />[ 0.925262] is_lpcharging_state: is_lpm_boot:1<br />[ 0.925354] a2220_init : LPM Charging Mode! return 0<br />[ 0.925689] level device init<br />[ 0.930786] adie_codec_register_codec_operations: codec type 1<br />[ 0.931365] Loading pn544 driver<br />[ 0.931488] pn544_probe : IRQ num 628<br />[ 0.931854] pn544_probe : requesting IRQ 628<br />[ 0.932922] SCSI Media Changer driver v0.25 <br />[ 0.933288] PPP generic driver version 2.4.2<br />[ 0.933654] PPP Deflate Compression module registered<br />[ 0.933807] PPP BSD Compression module registered<br />[ 0.934478] PPP MPPE Compression module registered<br />[ 0.934631] NET: Registered protocol family 24<br />[ 0.934722] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).<br />[ 0.934906] CSLIP: code copyright 1989 Regents of the University of California.<br />[ 0.935394] tun: Universal TUN/TAP device driver, 1.6<br />[ 0.935516] tun: (C) 1999-2004 Max Krasnyansky <[email protected]><br />[ 0.936370] smsc911x: Driver version 2008-10-21<br />[ 0.936645] usbcore: registered new interface driver asix<br />[ 0.936767] usbcore: registered new interface driver cdc_ether<br />[ 0.936950] usbcore: registered new interface driver net1080<br />[ 0.937072] usbcore: registered new interface driver cdc_subset<br />[ 0.937225] usbcore: registered new interface driver zaurus<br />[ 0.937347] cdc_ncm: 04-Aug-2011<br />[ 0.937530] usbcore: registered new interface driver cdc_ncm<br />[ 0.937622] rmnet_init: SMD devices[8]<br />[ 0.940795] rmnet_init: SDIO devices[8]<br />[ 0.943084] msm_hsusb_smb328a_vbus_power attached 0<br />[ 0.945129] msm_otg msm_otg: success to host_notify_dev_register<br />[ 0.945373] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver<br />[ 0.945709] host driver registered w/ tranceiver<br />[ 0.945983] usbcore: registered new interface driver cdc_acm<br />[ 0.946075] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters<br />[ 0.946289] usbcore: registered new interface driver usblp<br />[ 0.946441] Initializing USB Mass Storage driver...<br />[ 0.946563] usbcore: registered new interface driver usb-storage<br />[ 0.946716] USB Mass Storage support registered.<br />[ 0.946838] usbcore: registered new interface driver ums-alauda<br />[ 0.946960] usbcore: registered new interface driver ums-cypress<br />[ 0.947143] usbcore: registered new interface driver ums-datafab<br />[ 0.947357] usbcore: registered new interface driver ums-freecom<br />[ 0.947479] usbcore: registered new interface driver ums-isd200<br />[ 0.947662] usbcore: registered new interface driver ums-jumpshot<br />[ 0.947784] usbcore: registered new interface driver ums-karma<br />[ 0.947967] usbcore: registered new interface driver ums-onetouch<br />[ 0.948089] usbcore: registered new interface driver ums-sddr09<br />[ 0.948272] usbcore: registered new interface driver ums-sddr55<br />[ 0.948425] usbcore: registered new interface driver ums-usbat<br />[ 0.948608] usbcore: registered new interface driver usb_ehset_test<br />[ 0.948913] peripheral driver registered w/ tranceiver<br />[ 0.949096] msm_otg_sm_work 1798 id=0 OTG_STATE_UNDEFINED<br />[ 0.951293] android_usb gadget: Mass Storage Function, version: 2009/09/11<br />[ 0.951446] android_usb gadget: Number of LUNs=2<br />[ 0.951538] lun0: LUN: removable file: (no medium)<br />[ 0.951690] lun1: LUN: removable file: (no medium)<br />[ 0.952117] android_usb gadget: android_usb ready<br />[ 0.953369] DIAG registered SDIO device<br />[ 0.953857] diagchar initialized now<br />[ 0.954254] mousedev: PS/2 mouse device common for all mice<br />[ 0.955566] input: ffa-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input1<br />[ 0.956207] is_lpcharging_state: is_lpm_boot:1<br />[ 0.956359] mxt224_init : LPM Charging Mode! return ENODEV!<br />[ 0.956726] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input2<br />[ 0.958618] using rtc device, pm8xxx_rtc, for alarms<br />[ 0.958801] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0<br />[ 0.959197] i2c /dev entries driver<br />[ 0.961791] is_lpcharging_state: is_lpm_boot:1<br />[ 0.961883] yda165_init : LPM Charging Mode! return 0<br />[ 0.961975] is_lpcharging_state: is_lpm_boot:1<br />[ 0.962127] gp2a_opt_init : LPM Charging Mode! return 0<br />[ 0.962219] is_lpcharging_state: is_lpm_boot:1<br />[ 0.962371] lightsensor_init : LPM Charging Mode! return 0<br />[ 0.962615] input: fsa9480 as /devices/i2c-5/5-0025/input/input3<br />[ 0.965515] fsa9480 5-0025: fsa9480_reg_init dev ID: 0x0<br />[ 0.965728] i2c-core: driver [fsa9480] using legacy resume method<br />[ 0.965911] is_lpcharging_state: is_lpm_boot:1<br />[ 0.966003] k3g_init : LPM Charging Mode! return 0<br />[ 0.966674] input: orientation_sensor as /devices/virtual/input/input4<br />[ 0.967193] lirc_dev: IR Remote Control driver registered, major 238 <br />[ 0.967376] IR NEC protocol handler initialized<br />[ 0.967468] IR RC5(x) protocol handler initialized<br />[ 0.967559] IR RC6 protocol handler initialized<br />[ 0.967712] IR JVC protocol handler initialized<br />[ 0.967803] IR Sony protocol handler initialized<br />[ 0.967956] IR RC5 (streamzap) protocol handler initialized<br />[ 0.968048] IR LIRC bridge handler initialized<br />[ 0.968200] Linux video capture interface: v2.00<br />[ 0.968383] usbcore: registered new interface driver uvcvideo<br />[ 0.968475] USB Video Class driver (v1.1.0)<br />[ 0.969299] is_lpcharging_state: is_lpm_boot:1<br />[ 0.969390] sec_m5mo_init : LPM Charging Mode! return 0<br />[ 0.969573] is_lpcharging_state: is_lpm_boot:1<br />[ 0.969635] sec_s5k5bafx_camera_init : LPM Charging Mode! return 0<br />[ 0.969818] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0<br />[ 0.970123] max17040_probe: MAX17043 driver Loading!<br />[ 0.970275] max17040_get_version :<br />[ 0.971099] max17040 15-0036: MAX17040 Fuel-Gauge Ver 03<br />[ 0.971893] max17040_get_rcomp : current rcomp = 0xc71f(199)<br />[ 0.973114] max17040_get_rcomp : current rcomp = 0xc71f(199)<br />[ 0.976531] i2c-core: driver [max17040] using legacy suspend method<br />[ 0.976684] i2c-core: driver [max17040] using legacy resume method<br />[ 0.976898] smb328a_probe: SMB328A driver Loading!<br />[ 0.976989] is_lpcharging_state: is_lpm_boot:1<br />[ 0.977081] smb328a_probe : is lpm charging mode (1)<br />[ 0.980346] i2c-core: driver [smb328a] using legacy suspend method<br />[ 0.980438] i2c-core: driver [smb328a] using legacy resume method<br />[ 0.981262] msm_adc successfully registered<br />[ 1.000152] tsens_tm_probe: OK<br />[ 1.000457] pm8xxx_init_adc: adc_channel_open() failed.<br />[ 1.000549] pm8xxx_tm_probe: Unable to initialize adc<br />[ 1.000640] pm8xxx-tm: probe of pm8xxx-tm failed with error -9<br />[ 1.001159] pm8xxx_tm_probe: OK<br />[ 1.001617] device-mapper: uevent: version 1.0.3<br />[ 1.002166] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]<br />[ 1.002410] Bluetooth: HCI UART driver ver 2.2<br />[ 1.002563] Bluetooth: HCI H4 protocol initialized<br />[ 1.002655] Bluetooth: HCI_IBS protocol initialized<br />[ 1.002807] Bluetooth: BlueSleep Mode Driver Ver 1.1<br />[ 1.003417] cpuidle: using governor ladder<br />[ 1.003509] cpuidle: using governor menu<br />[ 1.004028] mmc0: mci-version: 0<br />[ 1.004180] mmc0: No card detect facilities available<br />[ 1.004547] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1<br />[ 1.004760] mmc0: 8 bit data mode enabled<br />[ 1.004913] mmc0: 4 bit data mode disabled<br />[ 1.005004] mmc0: polling status mode disabled<br />[ 1.005096] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz<br />[ 1.005493] mmc0: Slot eject status = 0<br />[ 1.005584] mmc0: Power save feature enable = 1<br />[ 1.005767] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x5df60000<br />[ 1.005889] mmc0: DM cmd busaddr 0x5df60000, cmdptr busaddr 0x5df77f40<br />[ 1.006256] mmc1: mci-version: 0<br />[ 1.006988] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2<br />[ 1.007171] mmc1: 8 bit data mode disabled<br />[ 1.007232] mmc1: 4 bit data mode enabled<br />[ 1.007324] mmc1: polling status mode disabled<br />[ 1.007476] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz<br />[ 1.007598] mmc1: Slot eject status = 0<br />[ 1.007720] mmc1: Power save feature enable = 1<br />[ 1.007812] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x5df80000<br />[ 1.007995] mmc1: DM cmd busaddr 0x5df80000, cmdptr busaddr 0x5df97f40<br />[ 1.008331] mmc2: mci-version: 0<br />[ 1.008544] mmc2: No card detect facilities available<br />[ 1.008819] mmc2: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5<br />[ 1.009002] mmc2: 8 bit data mode disabled<br />[ 1.009094] mmc2: 4 bit data mode enabled<br />[ 1.009155] mmc2: polling status mode disabled<br />[ 1.009307] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz<br />[ 1.009429] mmc2: Slot eject status = 0<br />[ 1.009552] mmc2: Power save feature enable = 1<br />[ 1.009643] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x5dfa0000<br />[ 1.009826] mmc2: DM cmd busaddr 0x5dfa0000, cmdptr busaddr 0x5dfb7f40<br />[ 1.010314] gpio_request: gpio-277 (left_led1:green) status -22<br />[ 1.010467] leds-gpio: probe of leds-gpio failed with error -22<br />[ 1.010742] Registered led device: camera:flash0<br />[ 1.010955] Registered led device: camera:flash1<br />[ 1.012298] usbcore: registered new interface driver usbhid<br />[ 1.012451] usbhid: USB HID core driver<br />[ 1.013153] logger: created 512K log 'log_main'<br />[ 1.013366] logger: created 256K log 'log_events'<br />[ 1.013641] logger: created 512K log 'log_radio'<br />[ 1.013854] logger: created 256K log 'log_system'<br />[ 1.014007] sec_getlog_supply_loggerinfo: 0xc11a7bf4 0xc1227bf4 0xc12a7bf4 0xc12e7bf4<br />[ 1.014373] zram: num_devices not specified. Using default: 1<br />[ 1.014526] zram: Creating 1 devices ...<br />[ 1.015380] usbcore: registered new interface driver snd-usb-audio<br />[ 1.016265] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0<br />[ 1.016510] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0<br />[ 1.016845] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0<br />[ 1.017639] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok<br />[ 1.018981] ALSA device list:<br />[ 1.019073] #0: msm-audio<br />[ 1.019531] oprofile: using arm/armv7-scorpionmp<br />[ 1.019744] GACT probability NOT on<br />[ 1.019836] Mirror/redirect action on<br />[ 1.019989] u32 classifier<br />[ 1.020111] Actions configured<br />[ 1.020202] Netfilter messages via NETLINK v0.30.<br />[ 1.020385] nf_conntrack version 0.5.0 (12588 buckets, 50352 max)<br />[ 1.020935] ctnetlink v0.93: registering with nfnetlink.<br />[ 1.021118] NF_TPROXY: Transparent proxy support initialized, version 4.1.0<br />[ 1.021240] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.<br />[ 1.021942] xt_time: kernel timezone is -0000<br />[ 1.022216] ip_tables: (C) 2000-2006 Netfilter Core Team<br />[ 1.022552] arp_tables: (C) 2002 David S. Miller<br />[ 1.022735] TCP cubic registered<br />[ 1.022796] Initializing XFRM netlink socket<br />[ 1.023498] NET: Registered protocol family 10<br />[ 1.025451] Mobile IPv6<br />[ 1.025543] ip6_tables: (C) 2000-2006 Netfilter Core Team<br />[ 1.025878] IPv6 over IPv4 tunneling driver<br />[ 1.026794] NET: Registered protocol family 17<br />[ 1.026977] NET: Registered protocol family 15<br />[ 1.027252] Bluetooth: RFCOMM TTY layer initialized<br />[ 1.027343] Bluetooth: RFCOMM socket layer initialized<br />[ 1.027496] Bluetooth: RFCOMM ver 1.11<br />[ 1.027587] Bluetooth: BNEP (Ethernet Emulation) ver 1.3<br />[ 1.027740] Bluetooth: BNEP filters: protocol multicast<br />[ 1.027832] Bluetooth: HIDP (Human Interface Emulation) ver 1.2<br />[ 1.028137] NET: Registered protocol family 35<br />[ 1.028350] Registering the dns_resolver key type<br />[ 1.028442] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0<br />[ 1.028717] Registering SWP/SWPB emulation handler<br />[ 1.035888] clock_late_init() disabled 191 unused clocks<br />[ 1.075531] MSM Watchdog Initialized<br />[ 1.086151] set_dload_mode <0> ( C0017214 )<br />[ 1.095581] [TKEY] touchkey_init START <br />[ 1.095672] is_lpcharging_state: is_lpm_boot:1<br />[ 1.095764] touchkey_init : LPM Charging Mode! return ENODEV!<br />[ 1.096862] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2013-04-30 21:17:39 UTC (1367356659)<br />[ 1.097106] sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading<br />[ 1.097595] sec_bat_get_lpcharging_state: LP charging:1<br />[ 1.099151] ------------[ cut here ]------------<br />[ 1.099273] WARNING: at /home/jenkins/android/workspace/android/jellybean/kernel/samsung/msm8660-common/fs/proc/generic.c:586 proc_register+0x2a8/0x358()<br />[ 1.099456] proc_dir_entry '/proc/last_kmsg' already registered<br />[ 1.099609] Modules linked in:<br />[ 1.099700] [fg] p:8749, s1:93, s2:100, v:4032500, t:0<br />[ 1.099761] sec_bat_measure_work: adc work already on a queue<br />[ 1.100006] [<c010ac7c>] (unwind_backtrace+0x0/0xe0) from [<c019be9c>] (warn_slowpath_common+0x4c/0x64)<br />[ 1.100219] [<c019be9c>] (warn_slowpath_common+0x4c/0x64) from [<c019bf34>] (warn_slowpath_fmt+0x2c/0x3c)<br />[ 1.100402] [<c019bf34>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02a8f5c>] (proc_register+0x2a8/0x358)<br />[ 1.100585] [<c02a8f5c>] (proc_register+0x2a8/0x358) from [<c02a9338>] (create_proc_entry+0x68/0x84)<br />[ 1.100708] [<c02a9338>] (create_proc_entry+0x68/0x84) from [<c00304a4>] (ram_console_late_init+0x24/0x74)<br />[ 1.100891] [<c00304a4>] (ram_console_late_init+0x24/0x74) from [<c010049c>] (do_one_initcall+0x90/0x160)<br />[ 1.101074] [<c010049c>] (do_one_initcall+0x90/0x160) from [<c0008988>] (kernel_init+0x98/0x140)<br />[ 1.101318] [<c0008988>] (kernel_init+0x98/0x140) from [<c0105b98>] (kernel_thread_exit+0x0/0x8)<br />[ 1.101501] ---[ end trace 4c8306cf1b16c853 ]---<br />[ 1.101684] Warning: unable to open an initial console.<br />[ 1.102050] Freeing init memory: 324K<br />[ 1.103912] sec_bat_get_lpcharging_state: LP charging:1<br />[ 1.104827] init: /init.target.rc: 405: invalid command 'user'<br />[ 1.105010] init: /init.target.rc: 406: invalid command 'group'<br />[ 1.106689] init: invalid uid 'fm_radio'<br />[ 1.122222] mmc0: new high speed MMC card at address 0001<br />[ 1.122711] mmcblk0: mmc0:0001 KYL00M 14.6 GiB <br />[ 1.122955] mmcblk0boot0: mmc0:0001 KYL00M partition 1 512 KiB<br />[ 1.123199] mmcblk0boot1: mmc0:0001 KYL00M partition 2 512 KiB<br />[ 1.128143] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 ><br />[ 1.130157] pmic8058_xoadc:The offset for AMUX calibrationwas -292<br />[ 1.133300] mmcblk0boot1: unknown partition table<br />[ 1.135711] mmcblk0boot0: unknown partition table<br />[ 1.170989] msm_otg_sm_work 1801 id=1 OTG_STATE_UNDEFINED<br />[ 1.171203] msm_hsusb_pmic_id_notif_init: USB_ID is not routed to PMIC<br />[ 1.171661] msm_otg_suspend: usb in low power mode<br />[ 1.320281] gpio_request: gpio-251 (SD_WP_Switch) status -22<br />[ 1.320373] msm_sdc3_get_wpswitch:Failed to request GPIO 251<br />[ 1.320556] mmc1: host does not support reading read-only switch. assuming write-enable.<br />[ 1.324432] mmc1: new high speed SDHC card at address e624<br />[ 1.324920] mmcblk1: mmc1:e624 SU16G 14.8 GiB <br />[ 1.335327] mmcblk1: p1<br />[ 1.345214] EXT4-fs (mmcblk0p24): INFO: recovery required on readonly filesystem<br />[ 1.345397] EXT4-fs (mmcblk0p24): write access will be enabled during recovery<br />[ 1.379821] EXT4-fs (mmcblk0p24): recovery complete<br />[ 1.411315] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: barrier=1<br />[ 1.411590] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p26<br />[ 1.502899] fs_mgr: Cannot mount filesystem on /dev/block/mmcblk0p26 at /cache<br />[ 1.503082] init: fs_mgr_mount_all returned an error<br />[ 1.512695] sec_switch_init_work value = 1 <br />[ 1.512786] sec_switch_set_vbus_status USB_VBUS_AP_ON 2<br />[ 1.522918] fsa9480_manual_switching(0)<br />[ 1.527038] EXT4-fs (mmcblk0p24): re-mounted. Opts: (null)<br />[ 1.748199] EXT4-fs (mmcblk0p24): re-mounted. Opts: barrier=0<br />[ 1.774017] init: Unable to open persistent property directory /data/property errno: 2<br />[ 1.786285] init: service 'console' requires console<br />[ 1.792144] charger: <br />[ 1.792602] charger: *************** LAST KMSG ***************<br />[ 1.793365] charger: <br />[ 1.794921] [ 0.000000] [0: swapper: 0] Booting Linux on physical CPU 0<br />[ 1.795013] [ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu<br />[ 1.796203] [ 0.000000] [0: swapper: 0] Linux version 3.0.72-cyanogenmod-g888a0be (pinky-ghost@cyanogenmod) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Apr 29 17:15:55 PDT 2013<br />[ 1.797485] [ 0.000000] [0: swapper: 0] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d<br />[ 1.797607] [ 0.000000] [0: swapper: 0] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache<br />[ 1.798522] [VIBETONZ:WJYOO] MISC_REGISTER nRet = 0<br />[ 1.799499] [ 0.000000] [0: swapper: 0] Machine: QCT MSM8X60 FUSION FFA<br />[ 1.799591] [ 0.000000] [0: swapper: 0] memory pool 0 (start 38000000 size 600000) initialized<br />[ 1.799987] THNAK YOU!!<br />[ 1.800292] vibrator I2C attach success!!!<br />[ 1.800994] [VIBETONZ] ImmVibeSPI_ForceOut_Initialize <br />[ 1.802612] [ 0.000000] [0: swapper: 0] memory pool 1 (start 38600000 size 3802000) initialized<br />[ 1.802734] [ 0.000000] [0: swapper: 0] memory pool 3 (start 79100000 size 6f00000) initialized<br />[ 1.804260] [ 0.000000] [0: swapper: 0] Memory policy: ECC disabled, Data cache writealloc<br />[ 1.804382] [ 0.000000] [0: swapper: 0] socinfo_init: v6, id=86, ver=2.0, raw_id=1697, raw_ver=1697, hw_plat=0, hw_plat_ver=65536<br />[ 1.805938] [ 0.000000] [0: swapper: 0] accessory_chip=0 hw_plat_subtype=0<br />[ 1.806030] [ 0.000000] [0: swapper: 0] sec_getlog_supply_meminfo: 40000000 40000000 0 0<br />[ 1.807220] [ 0.000000] [0: swapper: 0] allocating 12906496 bytes at c1c5d000 (4205d000 physical) for fb<br />[ 1.807342] [ 0.000000] [0: swapper: 0] PERCPU: Embedded 8 pages/cpu @c28af000 s9632 r8192 d14944 u32768<br />[ 1.808868] [ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 209672<br />[ 1.809722] [ 0.000000] [0: swapper: 0] Kernel command line: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c10 console=null sec_debug.en<br />[ 1.811096] able=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13 androidboot.emmc=true androidboot.serialno=1e304cbe androidboot.baseband=csfb<br />[ 1.811248] [ 0.000000] [0: swapper: 0] (sec_dbg_setup)<br />[ 1.813079] [ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_base = 0x4020400c<br />[ 1.813201] [ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_size = 0x100000<br />[ 1.813293] [ 0.000000] hw_rev_setup : HW rev value is intialized first<br />[ 1.815124] [ 0.000000] HW rev value : 0xD<br />[ 1.815185] [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)<br />[ 1.815277] [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)<br />[ 1.817169] [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)<br />[ 1.817260] [ 0.000000] Memory: 43MB 760MB 24MB = 827MB total<br />[ 1.817352] [ 0.000000] Memory: 805268k/805268k available, 156268k reserved, 421888K highmem<br />[ 1.819183] [ 0.000000] Virtual kernel memory layout:<br />[ 1.819244] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)<br />[ 1.819335] [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)<br />[ 1.819427] [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)<br />[ 1.821350] [ 0.000000] vmalloc : 0xdf800000 - 0xfa000000 ( 424 MB)<br />[ 1.821441] [ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)<br />[ 1.821502] [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)<br />[ 1.823394] [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)<br />[ 1.823486] [ 0.000000] .init : 0xc0008000 - 0xc0059000 ( 324 kB)<br />[ 1.823577] [ 0.000000] .text : 0xc0100000 - 0xc0b745f8 (10706 kB)<br />[ 1.825164] [VIBETONZ] ImmVibeSPI_ForceOut_AmpDisable <br />[ 1.825744] [ 0.000000] .data : 0xc0c00000 - 0xc0cdebc0 ( 891 kB)<br />[ 1.825836] [ 0.000000] .bss : 0xc0cdebe4 - 0xc1334f94 (6489 kB)<br />[ 1.825927] [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1<br />[ 1.827758] [ 0.000000] Preemptible hierarchical RCU implementation.<br />[ 1.827850] [ 0.000000] NR_IRQS:855<br />[ 1.827911] [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms<br />[ 1.828033] [ 0.000000] Console: colour dummy device 80x30<br />[ 1.828857] init: using deprecated syntax for specifying property 'persist.sys.usb.config', use ${name} instead<br />[ 1.831329] [ 0.150207] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67656)<br />[ 1.831451] [ 0.150238] pid_max: default: 32768 minimum: 301<br />[ 1.831512] [ 0.150756] Mount-cache hash table entries: 512<br />[ 1.831604] [ 0.152069] Initializing cgroup subsys cpuacct<br />[ 1.833831] [ 0.152191] Initializing cgroup subsys freezer<br />[ 1.833923] [ 0.152252] CPU: Testing write buffer coherency: ok<br />[ 1.833984] [ 0.152587] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available<br />[ 1.834106] [ 0.184997] CPU1: Booted secondary processor<br />[ 1.836364] [ 0.194885] Brought up 2 CPUs<br />[ 1.836425] [ 0.194885] SMP: Total of 2 processors activated (27.06 BogoMIPS).<br />[ 1.836517] [ 0.207244] print_constraints: dummy: <br />[ 1.836608] [ 0.207305] rdev_init_debugfs: Error-Bad Function Input<br />[ 1.836669] [ 0.207611] NET: Registered protocol family 16<br />[ 1.839599] [ 0.207794] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver<br />[ 1.839691] [ 0.209320] (sec_get_lpm_mode) 1a2b3c10<br />[ 1.839752] [ 0.209320] (sec_get_lpm_mode) 1<br />[ 1.839813] [ 0.209350] (sec_debug_init)<br />[ 1.839874] [ 0.209350] (sec_debug_init) reset_reason : 0x1a2b3c10<br />[ 1.842773] [ 0.209381] msm_rpm_init: RPM firmware 2.0.1115<br />[ 1.842864] [ 0.209991] saw_probe: id=0, name=8901_s0<br />[ 1.842926] [ 0.210296] saw_probe: id=1, name=8901_s1<br />[ 1.843017] [ 0.211547] rcg_clk_handoff: gsbi12_uart_clk rate=3686400<br />[ 1.845520] [ 0.211608] rcg_clk_handoff: gsbi12_qup_clk rate=24000000<br />[ 1.845611] [ 0.211639] rcg_clk_handoff: sdc1_clk rate=48000000<br />[ 1.845672] [ 0.211700] rcg_clk_handoff: dsi_byte_clk rate=1<br />[ 1.845764] [ 0.211730] rcg_clk_handoff: mdp_clk rate=200000000<br />[ 1.848510] [ 0.211853] rcg_clk_handoff: pixel_mdp_clk rate=27400000<br />[ 1.848602] [ 0.213378] ACPU PVS: Slow<br />[ 1.848632] [ 0.213409] Max ACPU freq: 1512000 KHz<br />[ 1.848724] [ 0.218933] CPU0: 23 scaling frequencies supported.<br />[ 1.848785] [ 0.218963] CPU1: 23 scaling frequencies supported.<br />[ 1.851867] [ 0.219177] msm8x60_init_mmc : skip sdcc2 config for lpm boot<br />[ 1.851989] [ 0.219268] msm8x60_init_mmc : skip sdcc5 config for lpm boot<br />[ 1.852050] [ 0.219299] LTE_switch_init!<br />[ 1.852111] [ 0.219329] LTE_switch_init end!<br />[ 1.852172] [ 0.220428] pm8058_probe: PMIC revision: E3<br />[ 1.855529] [ 0.221435] pm_gpio_probe: OK: base=173, ngpio=40<br />[ 1.855621] [ 0.221618] pm8xxx_mpp_probe: OK: base=213, ngpio=12<br />[ 1.855682] [ 0.222686] pm8901_probe: PMIC REVISION = F4<br />[ 1.855773] [ 0.222991] pm8xxx_mpp_probe: OK: base=225, ngpio=4<br />[ 1.858215] [ 0.234161] ram_console: got buffer at 77800000, size 100000<br />[ 1.858306] [ 0.234252] ram_console: error in header, 1<br />[ 1.858398] [ 0.234252] ram_console: found existing buffer, size 917476, start 789404<br />[ 1.858489] [ 3.118499] console [ram-1] enabled<br />[ 1.860809] [ 3.119018] msm8x60_init : skip charm devices for lpm boot<br />[ 1.860900] [ 3.119903] pm8058_gpios_init PMIC_GPIO_EAR_DET : OK <br />[ 1.860992] [ 3.120635] tsp_power_init: MXT224 Power On skipped by LPM<br />[ 1.861114] [ 3.120788] brcm_wlan_init: start<br />[ 1.863311] [ 3.120880] brcm_init_wlan_mem: WIFI MEM Allocated<br />[ 1.863403] [ 3.135803] bio: create slab <bio-0> at 0<br />[ 1.863464] [ 3.136962] ION heap vmalloc created<br />[ 1.863525] [ 3.137084] ION heap mm created at 38800000 with size 3600000<br />[ 1.865783] [ 3.137207] ION heap mm_fw created at 38600000 with size 200000<br />[ 1.865875] [ 3.137329] ION heap mfc created at 3be00000 with size 2000<br />[ 1.865966] [ 3.137481] ION heap sf created at 79100000 with size 4000000<br />[ 1.867858] [ 3.137573] ION heap camera_preview created at 7d100000 with size 1200000<br />[ 1.867950] [ 3.137725] ION heap wb created at 7e300000 with size 1400000<br />[ 1.868041] [ 3.137817] ION heap qsecom created at 7f700000 with size 600000<br />[ 1.869903] [ 3.137969] ION heap audio created at 7fd00000 with size 28b000<br />[ 1.869995] [ 3.138183] pmic8058_pwm_probe: OK<br />[ 1.870056] [ 3.138702] SCSI subsystem initialized<br />[ 1.870117] [ 3.138946] usbcore: registered new interface driver usbfs<br />[ 1.872406] [ 3.139129] usbcore: registered new interface driver hub<br />[ 1.872497] [ 3.139312] usbcore: registered new device driver usb<br />[ 1.872589] [ 3.139770] i2c-gpio i2c-gpio.15: using pins 107 (SDA) and 101 (SCL)<br />[ 1.874481] [ 3.139984] i2c-gpio i2c-gpio.10: using pins 138 (SDA) and 139 (SCL)<br />[ 1.874572] [ 3.140228] i2c-gpio i2c-gpio.13: using pins 156 (SDA) and 157 (SCL)<br />[ 1.874664] [ 3.140441] i2c-gpio i2c-gpio.11: using pins 38 (SDA) and 39 (SCL)<br />[ 1.876800] [ 3.140716] i2c-gpio i2c-gpio.12: using pins 51 (SDA) and 52 (SCL)<br />[ 1.876892] [ 3.140930] i2c-gpio i2c-gpio.17: using pins 70 (SDA) and 94 (SCL)<br />[ 1.876983] [ 3.141174] i2c-gpio i2c-gpio.9: using pins 155 (SDA) and 154 (SCL)<br />[ 1.879119] [ 3.141418] Advanced Linux Sound Architecture Driver Version 1.0.24.<br />[ 1.879241] [ 3.141906] Bluetooth: Core ver 2.16<br />[ 1.879302] [ 3.142028] NET: Registered protocol family 31<br />[ 1.879394] [ 3.142150] Bluetooth: HCI device and connection manager initialized<br />[ 1.881683] [ 3.142242] Bluetooth: HCI socket layer initialized<br />[ 1.881774] [ 3.142364] Bluetooth: L2CAP socket layer initialized<br />[ 1.881835] [ 3.142578] Bluetooth: SCO socket layer initialized<br />[ 1.881927] [ 3.143096] cfg80211: Calling CRDA to update world regulatory domain<br />[ 1.884521] [ 3.143310] Switching to clocksource gp_timer<br />[ 1.884582] [ 3.156555] NET: Registered protocol family 2<br />[ 1.884674] [ 3.156829] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)<br />[ 1.886230] [ 3.157165] TCP established hash table entries: 65536 (order: 7, 524288 bytes)<br />[ 1.886352] [ 3.157867] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)<br />[ 1.886444] [ 3.158630] TCP: Hash tables configured (established 65536 bind 65536)<br />[ 1.888671] [ 3.158691] TCP reno registered<br />[ 1.888732] [ 3.158843] UDP hash table entries: 256 (order: 1, 8192 bytes)<br />[ 1.888824] [ 3.158905] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)<br />[ 1.888946] [ 3.159423] NET: Registered protocol family 1<br />[ 1.891235] [ 3.159851] RPC: Registered named UNIX socket transport module.<br />[ 1.891326] [ 3.159973] RPC: Registered udp transport module.<br />[ 1.891418] [ 3.160034] RPC: Registered tcp transport module.<br />[ 1.891479] [ 3.160125] RPC: Registered tcp NFSv4.1 backchannel transport module.<br />[ 1.893707] [ 3.160369] Trying to unpack rootfs image as initramfs...<br />[ 1.893798] [ 3.176788] Freeing initrd memory: 380K<br />[ 1.893890] [ 3.177062] PMU: registered new PMU device of type 0<br />[ 1.893951] [ 3.177276] PMU: registered new PMU device of type 1<br />[ 1.894042] [ 3.177764] ETM/ETB intialized.<br />[ 1.896911] [ 3.177978] pil_qdsp6v3 pil_qdsp6v3: using secure boot<br />[ 1.897003] [ 3.178283] pil_modem pil_modem: using secure boot<br />[ 1.897064] [ 3.178466] sdio_al:SDIO-AL SW version 1.30<br />[ 1.897155] [ 3.180328] smd_channel_probe_worker: allocation table not initialized<br />[ 1.899383] [ 3.184234] msm_dsps driver version 3.03.<br />[ 1.899475] [ 3.186584] lpa_if_init: lpa_if_ptr 0xde0a9200 buf_vir 0xffdf0000 buf_phy 0x5e4d0000 buf_zise 65536<br />[ 1.899597] [ 3.188293] sec_switch_probe enter sec_switch_probe<br />[ 1.903350] [ 3.188476] gpio_request: gpio-230 (?) status -22<br />[ 1.903411] [ 3.188629] cfg_gpio_low_power: failed to sleep gpio 230: -22<br />[ 1.903503] [ 3.188690] gpio_request: gpio-236 (?) status -22<br />[ 1.903594] [ 3.188812] cfg_gpio_low_power: failed to sleep gpio 236: -22<br />[ 1.905853] [ 3.188903] gpio_request: gpio-237 (?) status -22<br />[ 1.905944] [ 3.189025] cfg_gpio_low_power: failed to sleep gpio 237: -22<br />[ 1.906036] [ 3.189086] gpio_request: gpio-240 (?) status -22<br />[ 1.906097] [ 3.189239] cfg_gpio_low_power: failed to sleep gpio 240: -22<br />[ 1.908691] [ 3.189300] gpio_request: gpio-244 (?) status -22<br />[ 1.908782] [ 3.189361] cfg_gpio_low_power: failed to sleep gpio 244: -22<br />[ 1.908874] [ 3.189514] gpio_request: gpio-245 (?) status -22<br />[ 1.908935] [ 3.189575] cfg_gpio_low_power: failed to sleep gpio 245: -22<br />[ 1.911254] [ 3.189697] gpio_request: gpio-258 (?) status -22<br />[ 1.911315] [ 3.189788] cfg_gpio_low_power: failed to sleep gpio 258: -22<br />[ 1.911407] [ 3.189910] gpio_request: gpio-282 (?) status -22<br />[ 1.911499] [ 3.189971] cfg_gpio_low_power: failed to sleep gpio 282: -22<br />[ 1.913696] [ 3.190124] gpio_request: gpio-291 (?) status -22<br />[ 1.913787] [ 3.190185] cfg_gpio_low_power: failed to sleep gpio 291: -22<br />[ 1.913879] [ 3.191986] msm_rpm_log_probe: OK<br />[ 1.913940] [ 3.192321] [BT] bcm4330_bluetooth_init <br />[ 1.914001] [ 3.192687] [BT] bcm4330_bluetooth_probe <br />[ 1.916870] [ 3.193084] printk_remap_nocache: sec_log_save_size 524288 at sec_log_save_base 0x40184008 <br />[ 1.916992] [ 3.193176] printk_remap_nocache: sec_log_reserve_size 524296 at sec_log_reserve_base 0x40184000 <br />[ 1.918212] [ 3.193939] sec_log_save_old: saved old log at 3145@de913000<br />[ 1.918304] [ 3.198638] sec_getlog_supply_kloginfo: 0xc1115344<br />[ 1.918395] [ 3.276733] highmem bounce pool size: 64 pages<br />[ 1.918457] [ 3.276977] as`mem: initia�azed<br />[ 1.918518] [ 3.23020] fuse init (API verrion 7.16!<br />[ 1.921508] [ 3.283325] mSgmni `as been set to 749<br />[ 1.921600] [ 3.284759] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)<br />[ 1.921691] [ 3.284942] io scheduler noop registered<br />[ 1.921783] [ 3.285034] io scheduler deadline registered (default)<br />[ 1.924041] [ 3.285217] io scheduler cfq registered<br />[ 1.924102] [ 3.287414] mdp4_csc_config: Block type 10 isn't supported by CSC.<br />[ 1.924194] [ 3.287567] mdp4_csc_config: Block type 8 isn't supported by CSC.<br />[ 1.924285] [ 3.291259] ld9040 start lcdc_ld9040_panel_init<br />[ 1.926849] [ 3.291473] ld9040 start ld9040_probe: pdev->name:lcdc_ld9040_wvga<br />[ 1.926940] [ 3.291564] ld9040 msm_fb_add_device START<br />[ 1.927001] [ 3.291717] setting pdata->panel_info.fb_num to 3. type: 0<br />[ 1.927093] [ 3.291809] msm_fb_add_device: msm_fb_device_alloc failed!<br />[ 1.929321] [ 3.291961] ld9040 msm_fb_add_device end<br />[ 1.929382] [ 3.292297] ld9040 platform_driver_register(&this_driver) is done <br />[ 1.929504] [ 3.292388] ld9040 LDI : EA8868, pixelclock 27400000<br />[ 1.929565] [ 3.292755] setting pdata->panel_info.fb_num to 3. type: 3<br />[ 1.931854] [ 3.295532] mdp4_lcdc_vsync_init: ndx=0<br />[ 1.931915] [ 3.297790] pm_runtime: fail to wake up<br />[ 1.932006] [ 3.297821] [kmj] lcdc_LD9040_panel_power:enable:1<br />[ 1.932067] [ 3.28919] ld9040 lcdc_Ld9040_panel_on` + (0,0,0)<br />[ 1.932159] [ <br />[ 1.934661] [ 3.29880] ld8040 spart spi_init<br />[ 1.934722] [ 3.298980] ld9040 clk : 103, cs : 104, sdi : 106<br />[ 1.934814] [ 3.299011] ld9040 start ld9040_disp_powerup<br />[ 1.934875] [ 3.353912] ld9040 start ld9040_disp_on - HW Rev: 13<br />[ 1.934967] [ 3.484252] ld9040 ld9040_read_lcd_id: a1 3 22<br />[ 1.938415] [ 3.484252] ld9040 lcd EA8868 M3<br />[ 1.938476] [ 3.547668] ld9040 ACL_cutoff_set Percentage : 40!!<br />[ 1.938568] [ 3.549011] ld9040 ea8868_gamma_ctl 18 18<br />[ 1.938629] [ 3.549133] ld9040 lcdc_ld9040_panel_on - (1,1,1)<br />[ 1.941162] [ 3.550567] mdp4_csc_config: Block type 10 isn't supported by CSC.<br />[ 1.941253] [ 3.550598] mdp4_csc_config: Block typ� 8 a�n't Supported bX CSC.<br />[ 1.941345] Y 3.573911] Console: s�itching to colour frame buffep device 60x50<br />[ 1.943389] [ 3.592041] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!<br />[ 1.943511] [ 3.592224] is_lpcharging_state: is_lpm_boot:1<br />[ 1.943572] [ 3.592315] [lpm-mode] skip init logo!<br />[ 1.943664] [ 3.592742] Registered led device: lcd-backlight<br />[ 1.945739] [ 3.592864] mdp4_lcdc_vsync_init: ndx=0<br />[ 1.945800] [ 3.592987] sec_getlog_supply_fbinfo: 0x4205d000 480 800 32 2<br />[ 1.945892] [ 3.593139] ld9040 platform_device_register(&this_device) is done <br />[ 1.945983] [ 3.593780] hdmi_msm hdmi_msm.0: probe<br />[ 1.948364] [ 3.594207] hdmi_msm hdmi_msm.1: probe<br />[ 1.948425] [ 3.594329] hdmi_msm hdmi_msm.1: Features <val:0x80004481, HDMI:ON, HDCP:ON><br />[ 1.948516] [ 3.594665] setting pdata->panel_info.fb_num to 1. type: 7<br />[ 1.948608] [ 3.595306] mdp4_dtv_vsync_init: ndx=0<br />[ 1.951080] [ 3.599395] FrameBuffer[1] 1920x1080 size=8294400 bytes is registered successfully!<br />[ 1.951202] [ 3.599670] mdp4_dtv_vsync_init: ndx=0<br />[ 1.951263] [ 3.599914] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group de0c9808<br />[ 1.953338] [ 3.600036] hdmi_msm hdmi_msm.1: external_common_state_create: kobject_uevent(KOBJ_ADD)<br />[ 1.953430] [ 3.600219] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled<br />[ 1.953552] [ 3.600494] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0<br />[ 1.955963] [ 3.601440] <br />[ 1.956024] [ 3.601470] msm_vidc_enc: Inside vid_enc_init()<br />[ 1.956085] [ 3.601776] <br />[ 1.956115] [ 3.601806] msm_vidc_enc: Inside vid_enc_vcd_init()<br />[ 1.956207] [ 3.602020] is_lpcharging_state: is_lpm_boot:1<br />[ 1.956268] [ 3.602233] sii9234_init : LPM Charging Mode! return 0<br />[ 1.959350] [ 3.675201] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART<br />[ 1.959472] [ 3.675872] msm_serial_hs module loaded<br />[ 1.959533] [ 3.676025] msm_serial_hsl: detected port #1<br />[ 1.961669] [ 3.676239] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM<br />[ 1.961791] [ 3.676757] msm_serial_hsl: detected port #0<br />[ 1.961853] [ 3.676971] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM<br />[ 1.963897] [ 3.677490] msm_serial_hsl: driver initialized<br />[ 1.963989] [ 3.678680] msm_rotator_probe: rotator_hw_revision=1<br />[ 1.964080] [ 3.684783] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU<br />[ 1.966369] [ 3.686401] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU<br />[ 1.966461] [ 3.687622] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU<br />[ 1.966583] [ 3.692779] brd: module loaded<br />[ 1.966644] [ 3.695068] loop: module loaded<br />[ 1.969207] [ 3.695373] is_lpcharging_state: is_lpm_boot:1<br />[ 1.969299] [ 3.695526] akm8975_init : LPM Charging Mode! return 0<br />[ 1.969390] [ 3.695617] is_lpcharging_state: is_lpm_boot:1<br />[ 1.969451] [ 3.695770] k3dh_init : LPM Charging Mode! return 0<br />[ 1.971984] [ 3.695953] sec_jack:sec_jack_probe : Registering jack driver<br />[ 1.972076] [ 3.696228] input: sec_jack as /devices/virtual/input/input0<br />[ 1.972167] [ 3.697113] pm8xxx_upl_probe: OK<br />[ 1.972229] [ 3.698120] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22<br />[ 1.974945] [ 3.698638] is_lpcharging_state: is_lpm_boot:1<br />[ 1.975036] [ 3.698730] a2220_init : LPM Charging Mode! return 0<br />[ 1.975097] [ 3.699096] level device init<br />[ 1.975158] [ 3.704132] adie_codec_register_codec_operations: codec type 1<br />[ 1.975250] [ 3.704711] Loading pn544 driver<br />[ 1.978210] [ 3.704833] pn544_probe : IRQ num 628<br />[ 1.978271] [ 3.705200] pn544_probe : requesting IRQ 628<br />[ 1.978332] [ 3.706268] SCSI Media Changer driver v0.25 <br />[ 1.978424] [ 3.706634] PPP generic driver version 2.4.2<br />[ 1.978485] [ 3.706970] PPP Deflate Compression module registered<br />[ 1.981842] [ 3.707122] PPP BSD Compression module registered<br />[ 1.981933] [ 3.707824] PPP MPPE Compression module registered<br />[ 1.981994] [ 3.707977] NET: Registered protocol family 24<br />[ 1.983947] [ 3.708068] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).<br />[ 1.984069] [ 3.708251] CSLIP: code copyright 1989 Regents of the University of California.<br />[ 1.984191] [ 3.708770] tun: Universal TUN/TAP device driver, 1.6<br />[ 1.986755] [ 3.708862] tun: (C) 1999-2004 Max Krasnyansky <[email protected]><br />[ 1.986877] [ 3.709686] smsc911x: Driver version 2008-10-21<br />[ 1.986938] [ 3.709960] usbcore: registered new interface driver asix<br />[ 1.987030] [ 3.710083] usbcore: registered new interface driver cdc_ether<br />[ 1.989654] [ 3.710266] usbcore: registered new interface driver net1080<br />[ 1.989746] [ 3.71388\ usbcore: registered new interface dRiver cdc_subset<br />[ 1.989837] [ 3.71601] usbc�re: registered new iNterface driver jaurus<br />[ 1.989929] [ 3.710754] cdc_ncm: 04-Aug-2011<br />[ 1.992584] [ 3.710876] usbcore: registered new interface driver cdc_ncm<br />[ 1.992675] [ 3.710968] rmnet_init: SMD devices[8]<br />[ 1.992767] [ 3.714141] rmnet_init: SDIO devices[8]<br />[ 1.992828] [ 3.716430] msm_hsusb_smb328a_vbus_power attached 0<br />[ 1.995391] [ 3.718475] msm_otg msm_otg: success to host_notify_dev_register<br />[ 1.995513] [ 3.718688] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver<br />[ 1.995605] [ 3.719024] host driver registered w/ tranceiver<br />[ 1.997680] [ 3.719299] usbcore: registered new interface driver cdc_acm<br />[ 1.997772] [ 3.719390] cdc_acm USB Abstract Control odel driver For USB modems And ISDN adapters<br />[ 1.997863] [ 3.719604] usba/re: regiqtered new inteRface `river usblp<br />[ 1.999877] [ 3.719757] Initializing USB Mass Storage driver...<br />[ 1.999969] [ 3.719879] usbcore: registered new interface driver usb-storage<br />[ 2.000061] [ 3.720031] USB Mass Storage support registered.<br />[ 2.000152] [ 3.720153] usbcore: registered new interface driver ums-alauda<br />[ 2.003143] [ 3.720275] usbcore: registered new interface driver ums-cypress<br />[ 2.003265] [ 3.720458] usbcore: registered new interface driver ums-datafab<br />[ 2.003356] [ 3.720672] usbcore: registered new interface driver ums-freecom<br />[ 2.005584] [ 3.720794] usbcore: registered new interface driver ums-isd200<br />[ 2.005676] [ 3.720977] usbcore: registered new interface driver ums-jumpshot<br />[ 2.005767] [ 3.721099] usbcore: registered new interface driver ums-karma<br />[ 2.008056] [ 3.721282] usbcore: registered new interface driver ums-onetouch<br />[ 2.008148] [ 3.721405] usbcore: registered new interface driver ums-sddr09<br />[ 2.008239] [ 3.721588] usbcore: registered new interface driver ums-sddr55<br />[ 2.010009] [ 3.721710] usbcore: registered new interface driver ums-usbat<br />[ 2.010101] [ 3.721893] usbcore: registered new interface driver usb_ehset_test<br />[ 2.010192] [ 3.722229] peripheral driver registered w/ tranceiver<br />[ 2.012390] [ 3.722412] msm_otg_sm_work 1798 id=0 OTG_STATE_UNDEFINED<br />[ 2.012481] [ 3.724639] android_usb gadget: Mass Storage Function, version: 2009/09/11<br />[ 2.012573] [ 3.724792] android_usb gadget: Number of LUNs=2<br />[ 2.012634] [ 3.724884] lun0: LUN: removable file: (no medium)<br />[ 2.015441] [ 3.725036] lun1: LUN: removable file: (no medium)<br />[ 2.015502] [ 3.725463] android_usb gadget: android_usb ready<br />[ 2.015594] [ 3.726715] DIAG registered SDIO device<br />[ 2.015655] [ 3.727203] diagchar initialized now<br />[ 2.015716] [ 3.727600] mousedev: PS/2 mouse device common for all mice<br />[ 2.018554] [ 3.728942] input: ffa-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input1<br />[ 2.018676] [ 3.729583] is_lpcharging_state: is_lpm_boot:1<br />[ 2.018768] [ 3.729736] mxt224_init : LPM Charging Mode! return ENODEV!<br />[ 2.021026] [ 3.730102] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input2<br />[ 2.021148] [ 3.732025] using rtc device, pm8xxx_rtc, for alarms<br />[ 2.021240] [ 3.732208] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0<br />[ 2.023681] [ 3.732604] i2c /dev entries driver<br />[ 2.023773] [ 3.735198] is_lpcharging_state: is_lpm_boot:1<br />[ 2.023834] [ 3.735321] yda165_init : LPM Charging Mode! return 0<br />[ 2.023925] [ 3.73541] is_lpcharging_state is_lpm_boot:1<br />[ 2.023986] [ .735565] gp2aWopt_init : LPM Charging Mode!`return 0<br />[ 2.026763] [ 3n�35656] is_lpch�rging_state: is_lpm_boot:1<br />[ 2.026855] [ 3.735809] lightsensor_init : LPM Charging Mode! return 0<br />[ 2.026947] [ 3.736053] input: fsa9480 as /devices/i2c-5/5-0025/input/input3<br />[ 2.027038] [ 3.738952] fsa9480 5-0025: fsa9480_reg_init dev ID: 0x0<br />[ 2.029846] [ 3.739166] i2c-core: driver [fsa9480] using legacy resume method<br />[ 2.029937] [ 3.739349] is_lpcharging_state: is_lpm_boot:1<br />[ 2.030029] [ 3.739440] k3g_init : LPM Charging Mode! return 0<br />[ 2.030090] [ 3.740112] input: orientation_sensor as /devices/virtual/input/input4<br />[ 2.032653] [ 3.740661] lirc_dev: IR Remote Control driver registered, major 238 <br />[ 2.032745] [ 3.740814] IR NEC protocol handler initialized<br />[ 2.032836] [ 3.740905] IR RC5(x) protocol handler initialized<br />[ 2.032897] [ 3.740997] IR RC6 protocol handler initialized<br />[ 2.035369] [ 3.741149] IR JVC protocol handler initialized<br />[ 2.035461] [ 3.741241] IR Sony protocol handler initialized<br />[ 2.035552] [ 3.741394] IR RC5 (streamzap) protocol handler initialized<br />[ 2.035614] [ 3.741485] IR LIRC bridge handler initialized<br />[ 2.038085] [ 3.741638] Linux video capture interface: v2.00<br />[ 2.038177] [ 3.741821] usbcore: registered new interface driver uvcvideo<br />[ 2.038269] [ 3.741912] USB Video Class driver (v1.1.0)<br />[ 2.038330] [ 3.742767] is_lpcharging_state: is_lpm_boot:1<br />[ 2.040954] [ 3.742858] sec_m5mo_init : LPM Charging Mode! return 0<br />[ 2.041046] [ 3.743011] is_lpcharging_state: is_lpm_boot:1<br />[ 2.041107] [ 3.743103] sec_s5k5bafx_camera_init : LPM Charging Mode! return 0<br />[ 2.043334] [ 3.743255] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0<br />[ 2.043457] [ 3.743560] max17040_probe: MAX17043 driver Loading!<br />[ 2.043518] [ 3.743743] max17040_get_version :<br />[ 2.043579] [ 3.744537] max17040 15-0036: MAX17040 Fuel-Gauge Ver 03<br />[ 2.046386] [ 3.745330] max17040_get_rcomp : current rcomp = 0xc71f(199)<br />[ 2.046478] [ 3.746551] max17040_get_rcomp : current rcomp = 0xc71f(199)<br />[ 2.046569] [ 3.749969] i2c-core: driver [max17040] using legacy suspend method<br />[ 2.048339] [ 3.750122] i2c-core: driver [max17040] using legacy resume method<br />[ 2.048431] [ 3.750366] smb328a_probe: SMB328A driver Loading!<br />[ 2.048522] [ 3.750457] is_lpcharging_state: is_lpm_boot:1<br />[ 2.048583] [ 3.750549] smb328a_probe : is lpm charging mode (1)<br />[ 2.051483] [ 3.753784] i2c-core: driver [smb328a] using legacy suspend method<br />[ 2.051574] [ 3.753875] i2c-core: driver [smb328a] using legacy resume method<br />[ 2.051666] [ 3.754730] msm_adc successfully registered<br />[ 2.051727] [ 3.773773] tsens_tm_probe: OK<br />[ 2.054168] [ 3.774078M pm0xxx_init_adc2 adcWchannelWg`en() failed.<br />[ 2.054260] [ 3.774169] pm8xxx_tm_probe: Unable to initialize<br />[ 2.055419] [ 3.775207] device-mapper: uevent: version 1.0.3<br />[ 2.055511] [ 3.775787] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]<br />[ 2.055633] [ 3.776000] Bluetooth: HCI UART driver ver 2.2<br />[ 2.055694] [ 3.776184] Bluetooth: HCI H4 protocol initialized<br />[ 2.058532] [ 3.776275] Bluetooth: HCI_IBS protocol initialized<br />[ 2.058624] [ 3.776397] Bluetooth: BlueSleep Mode Driver Ver 1.1<br />[ 2.058685] [ 3.777038] cpuidle: using governor ladder<br />[ 2.058776] [ 3.777130] cpuidle: using governor menu<br />[ 2.058837] [ 3.777618] mmc0: mci-version: 0<br />[ 2.062133] [ 3.777801] mmc0: No card detect facilities available<br />[ 2.062225] [ 3.778167] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1<br />[ 2.062347] [ 3.778381] mmc0: 8 bit data mode enabled<br />[ 2.062408] [ 3.778503] mmc0: 4 bit data mode disabled<br />[ 2.064849] [ 3.778594] mmc0: polling status mode disabled<br />[ 2.064941] [ 3.778686] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz<br />[ 2.065032] [ 3.779113] mmc0: Slot eject status = 0<br />[ 2.065093] [ 3.779205] mmc0: Power save feature enable = 1<br />[ 2.067504] [ 3.779388] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x5d860000<br />[ 2.067596] [ 3.779479] mmc0: DM cmd busaddr 0x5d860000, cmdptr busaddr 0x5d877f40<br />[ 2.067718] [ 3.779846] mmc1: mci-version: 0<br />[ 2.069824] [ 3.780548] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2<br />[ 2.069946] [ 3.780761] mmc1: 8 bit data mode disabled<br />[ 2.070007] [ 3.780853] mmc1: 4 bit data mode enabled<br />[ 2.070098] [ 3.780944] mmc1: polling status mode disabled<br />[ 2.072662] [ 3.781097] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz<br />[ 2.072753] [ 3.781188] mmc1: Slot eject status = 0<br />[ 2.072814] [ 3.781341] mmc1: Power save feature enable = 1<br />[ 2.072906] [ 3.781433] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x5d880000<br />[ 2.075714] [ 3.781585] mmc1: DM cmd busaddr 0x5d880000, cmdptr busaddr 0x5d897f40<br />[ 2.075805] [ 3.781921] mmc2: mci-version: 0<br />[ 2.075866] [ 3.782165] mmc2: No card detect facilities available<br />[ 2.077667] [ 3.782409] mmc2: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5<br />[ 2.077789] [ 3.782592] mmc2: 8 bit data mode disabled<br />[ 2.077850] [ 3.782684] mmc2: 4 bit data mode enabled<br />[ 2.077941] [ 3.782775] mmc2: polling status mode disabled<br />[ 2.080810] [ 3.782928] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz<br />[ 2.080902] [ 3.783020] mmc2: Slot eject status = 0<br />[ 2.080963] [ 3.783172] mmc2: Power save feature enable = 1<br />[ 2.081054] [ 3.783264] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x5d8a0000<br />[ 2.083496] [ 3.783416] mmc2: DM cmd busaddr 0x5d8a0000, cmdptr busaddr 0x5d8b7f40<br />[ 2.083618] [ 3.783905] gpio_request: gpio-277 (left_led1:green) status -22<br />[ 2.083709] [ 3.784057] leds-gpio: probe of leds-gpio failed with error -22<br />[ 2.085571] [ 3.784332] Registered led device: camera:flash0<br />[ 2.085662] [ 3.784545] Registered led device: camera:flash1<br />[ 2.085723] [ 3.785888] usbcore: registered new interface driver usbhid<br />[ 2.085815] [ 3.786041] usbhid: USB HID core driver<br />[ 2.088256] [ 3.786804] logger: created 512K log 'log_main'<br />[ 2.088317] [ 3.787017] logger: created 256K log 'log_events'<br />[ 2.088409] [ 3.787292] logger: created 512K log 'log_radio'<br />[ 2.088470] [ 3.787506] logger: created 256K log 'log_system'<br />[ 2.091186] [ 3.787658] sec_getlog_supply_loggerinfo: 0xc11a7bf4 0xc1227bf4 0xc12a7bf4 0xc12e7bf4<br />[ 2.091308] [ 3.788024] zram: num_devices not specified. Using default: 1<br />[ 2.091400] [ 3.788177] zram: Creating 1 devices ...<br />[ 2.093780] [ 3.789001] usbcore: registered new interface driver snd-usb-audio<br />[ 2.093872] [ 3.789916] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0<br />[ 2.093994] [ 3.790161] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0<br />[ 2.096313] [ 3.790466] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0<br />[ 2.096405] [ 3.791290] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok<br />[ 2.096496] [ 3.792602] ALSA device list:<br />[ 2.096557] [ 3.792694] #0: msm-audio<br />[ 2.099487] [ 3.793151] oprofile: using arm/armv7-scorpionmp<br />[ 2.099578] [ 3.793365] GACT probability NOT on<br />[ 2.099639] [ 3.793457] Mirror/redirect action on<br />[ 2.099700] [ 3.793609] u32 classifier<br />[ 2.099761] [ 3.793731] Actions configured<br />[ 2.099822] [ 3.793823] Netfilter messages via NETLINK v0.30.<br />[ 2.102905] [ 3.794006] nf_conntrack version 0.5.0 (12588 buckets, 50352 max)<br />[ 2.102996] [ 3.794555] ctnetlink v0.93: registering with nfnetlink.<br />[ 2.103088] [ 3.794738] NF_TPROXY: Transparent proxy support initialized, version 4.1.0<br />[ 2.105194] [ 3.794860] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.<br />[ 2.105285] [ 3.795562] xt_time: kernel timezone is -0000<br />[ 2.105346] [ 3.795837] ip_tables: (C) 2000-2006 Netfilter Core Team<br />[ 2.105438] [ 3.796173] arp_tables: (C) 2002 David S. Miller<br />[ 2.107727] [ 3.796325] TCP cubic registered<br />[ 2.107788] [ 3.796417] Initializing XFRM netlink socket<br />[ 2.107849] [ 3.797149] NET: Registered protocol family 10<br />[ 2.107940] [ 3.799072] Mobile IPv6<br />[ 2.107971] [ 3.799194] ip6_tables: (C) 2000-2006 Netfilter Core Team<br />[ 2.110992] [ 3.799499] IPv6 over IPv4 tunneling driver<br />[ 2.111083] [ 3.800445] NET: Registered protocol family 17<br />[ 2.111145] [ 3.800628] NET: Registered protocol family 15<br />[ 2.111236] [ 3.800872] Bluetooth: RFCOMM TTY layer initialized<br />[ 2.113464] [ 3.800994] Bluetooth: RFCOMM socket layer initialized<br />[ 2.113555] [ 3.801147] Bluetooth: RFCOMM ver 1.11<br />[ 2.113616] [ 3.801239] Bluetooth: BNEP (Ethernet Emulation) ver 1.3<br />[ 2.113708] [ 3.801391] Bluetooth: BNEP filters: protocol multicast<br />[ 2.116088] [ 3.801483] Bluetooth: HIDP (Human Interface Emulation) ver 1.2<br />[ 2.116180] [ 3.801788] NET: Registered protocol family 35<br />[ 2.116271] [ 3.801971] Registering the dns_resolver key type<br />[ 2.118133] [ 3.802093] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0<br />[ 2.118255] [ 3.802368] Registering SWP/SWPB emulation handler<br />[ 2.118316] [ 3.809509] clock_late_init() disabled 191 unused clocks<br />[ 2.118408] [ 3.849243] MSM Watchdog Initialized<br />[ 2.120727] [ 3.859893] set_dload_mode <0> ( C0017214 )<br />[ 2.120819] [ 3.866088] [TKEY] touchkey_init START <br />[ 2.120880] [ 3.866180] is_lpcharging_state: is_lpm_boot:1<br />[ 2.120941] [ 3.866271] touchkey_init : LPM Charging Mode! return ENODEV!<br />[ 2.123565] [ 3n869140] ptc-pm8xxx rtb-pm8xxx: settiNg qy�tEm clock to 2013-0�-30 2�:17:26 UTC (1367356646)<br />[ 2.123718] [ 3.869445] sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading<br />[ 2.123809] [ 3.869903] sec_bat_get_lpcharging_state: LP charging:1<br />[ 2.125671] [ 3.871459] ------------[ cut here ]------------<br />[ 2.125732] [ 3.871551] WARNING: at /home/jenkins/android/workspace/android/jellybean/kernel/samsung/msm8660-common/fs/proc/generic.c:586 proc_register+0x2a8/0x358()<br />[ 2.127868] [ 3.871765] proc_dir_entry '/proc/last_kmsg' already registered<br />[ 2.127960] [ 3.871917] Modules linked in:<br />[ 2.128021] [ 3.872009] [fg] p:8749, s1:93, s2:100, v:4152500, t:0<br />[ 2.128112] [ 3.872039] sec_bat_measure_work: adc work already on a queue<br />[ 2.130279] [ 3.872314] [<c010ac7c>] (unwind_backtrace+0x0/0xe0) froe [<c019be9c>] (warn_slo�Path_common+0x4c/0x64)<br />[ 2.130432] [ 3*72497] [<c019be9c>] wabn_qlowpath_common+0x4c+0x64) from [<c019bf34>] (warn_slowpath_fmt+0x2c/0x3c)<br />[ 2.132537] [ 3.872680] [<c019bf34>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02a8f5c>] (proc_register+0x2a8/0x358)<br />[ 2.132690] S 3.872863] [<c02a8f5c>] (�rob_register+0x2a00x358) from [<c0a9338>] (cre�te�proc_entRy+0x68�0x84)<br />[ 2.134246] [ 3.872985] [<c02a9338>] (create_proc_entry+0x68/0x84) from [<c00304a4>] (ram_console_late_init+0x24/0x74)<br />[ 2.134368] [ 3.873168] [<c00304a4>] (ram_console_late_init+0x24/0x74) from [<c010049c>] (do_one_initcall+0x90/0x160)<br />[ 2.135925] [ 3.873352] [<c010049c>] (do_one_initcall#0x90/0x160) fro� [<c0000988>] (karnel_iniT+0x98/0x140)<br />[ 2.136047] [ 3.87#–] [<c00089884] (kernel_init+Px98/0x140) from [<c0105b8>] (kernel_thread_exit+0x0/0x8)<br />[ 2.136169] [ 3.873779] ---[ end trace 766e6642ddc437e5 ]---<br />[ 2.138092] [ 3.873992] Warning: unable to open an initial console.<br />[ 2.138153] [ 3.874359] Freeing init memory: 324K<br />[ 2.138244] [ 3.876190] sec_bat_get_lpcharging_state: LP charging:1<br />[ 2.138305] [ 3.877136] init: /init.target.rc: 405: invalid command 'user'<br />[ 2.140991] [ 3.877288] init: /init.target.rc: 406: invalid command 'group'<br />[ 2.141082] [ 3.878967] init: invalid uid 'fm_radio'<br />[ 2.141143] [ 3.896148] mmc0: new high speed MMC card at address 0001<br />[ 2.141235] [ 3.896575] mmcblk0: mmc0:0001 KYL00M 14.6 GiB <br />[ 2.143463] [ 3.896820] mmcblk0boot0: mmc0:0001 KYL00M partition 1 512 KiB<br />[ 2.143554] [ 3.897003] mmcblk0boot1: mmc0:0001 KYL00M partition 2 512 KiB<br />[ 2.144744] [ 3.902008] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 ><br />[ 2.144927] [ 3.903808] pmic8058_xoadc:The offset for AMUX calibrationwas -300<br />[ 2.146423] [ 3.907226] mmcblk0boot1: unknown partition table<br />[ 2.146514] [ 3.909423] mmcblk0boot0: unknown partition table<br />[ 2.146606] [ 3.945037] msm_otg_sm_work 1801 id=1 OTG_STATE_UNDEFINED<br />[ 2.146697] [ 3.945220] msm_hsusb_pmic_id_notif_init: USB_ID is not routed to PMIC<br />[ 2.148895] [ 3.945648] msm_otg_suspend: usb in low power mode<br />[ 2.148986] [ 4.094238] gpio_request: gpio-251 (SD_WP_Switch) status -22<br />[ 2.149078] [ 4.094360] msm_sdc3_get_wpswitch:Failed to request GPIO 251<br />[ 2.151031] [ 4.094512] mmc1: host does not support reading read-only switch. assuming write-enable.<br />[ 2.151153] [ 4.098388] mmc1: new high speed SDHC card at address e624<br />[ 2.151245] [ 4.098937] mmcblk1: mmc1:e624 SU16G 14.8 GiB <br />[ 2.151306] [ 4.109375] mmcblk1: p1<br />[ 2.153472] [ 4.121673] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: barrier=1<br />[ 2.153594] [ 4.121948] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p26<br />[ 2.153686] [ 4.406555] sec_switch_init_work value = 1 <br />[ 2.155578] [ 4.406646] sec_switch_set_vbus_status USB_VBUS_AP_ON 2<br />[ 2.155670] [ 4.417266] fsa9480_manual_switching(0)<br />[ 2.155731] [ 4.501464] fs_mgr: Cannot mount filesystem on /dev/block/mmcblk0p26 at /cache<br />[ 2.155853] [ 4.501678] init: fs_mgr_mount_all returned an error<br />[ 2.158416] [ 4.543640] EXT4-fs (mmcblk0p24): re-mounted. Opts: (null)<br />[ 2.158508] [ 4.733245] resout_irq_handler PMIC Initiated shutdown<br />[ 2.158599] [ 4.733398] PMIC Initiated shutdown cpu_power_off cpu=0<br />[ 2.158691] [ 4.733459] PMIC Initiated shutdown cpu_power_off cpu=1<br />[ 2.161010] [ 4.733673] Powering off the SoC<br />[ 2.161071] [ 4.733764] set_dload_mode <0> ( C0182270 )<br />[ 2.161132] [ 4.733856] pm8xxx_reset_pwr_off, [1]<br />[ 2.161224] [ 4.734008] pm8xxx_reset_pwr_off, [2]<br />[ 2.161285] [ 4.734100] pm8xxx_reset_pwr_off, [3]<br />[ 2.161346] [ 4.734375] pm8xxx_reset_pwr_off, [4]<br />[ 2.164581] [ 4.734527] pm8xxx_reset_pwr_off, [5]<br />[ 2.164642] [ 4.758666] pm8xxx_reset_pwr_off, [6]<br />[ 2.164703] [ 4.758758] pm8xxx_reset_pwr_off, [7]<br />[ 2.164764] [ 4.758911] pm8xxx_reset_pwr_off, [8]<br />[ 2.164825] [ 4.759002] pm8xxx_reset_pwr_off is called<br />[ 2.167358] [ 4.759094] Calling scm to disable arbiter<br />[ 2.167449] <br />[ 2.168548] 981 Corrected bytes, 11 unrecoverable blocks<br />[ 2.169036] charger: <br />[ 2.169494] charger: ************* END LAST KMSG *************<br />[ 2.170288] charger: <br />[ 2.170837] charger: --------------- STARTING CHARGER MODE ---------------<br />[ 2.206298] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0<br />[ 2.221588] ld9040 lcdc_ld9040_panel_off + (1,1,1)<br />[ 2.291198] android_usb: already disabled<br />[ 2.292999] usb: enable_store f:diag<br />[ 2.293090] usb: enable_store f:adb<br />[ 2.294158] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead<br />[ 2.299011] warning: `adbd' uses 32-bit capabilities (legacy support in use)<br />[ 2.300170] adb_open<br />[ 2.300262] adb_bind_config<br />[ 2.360809] ld9040 : lcdc_config_gpios [0]<br />[ 2.360870] ld9040 start ld9040_disp_powerdown<br />[ 2.360961] ld9040 lcdc_ld9040_panel_off -<br />[ 2.361083] [kmj] lcdc_LD9040_panel_power:enable:0<br />[ 2.372863] [kmj] lcdc_LD9040_panel_power:enable:1<br />[ 2.373840] ld9040 lcdc_ld9040_panel_on + (0,0,0)<br />[ 2.373931] ld9040 : lcdc_config_gpios [1]<br />[ 2.374023] ld9040 start spi_init<br />[ 2.374084] ld9040 clk : 103, cs : 104, sdi : 106<br />[ 2.374176] ld9040 start ld9040_disp_powerup<br />[ 2.432464] ld9040 start ld9040_disp_on - HW Rev: 13<br />[ 2.438232] ld9040 LCD_M3 : 1<br />[ 2.445343] ld9040 ACL_cutoff_set Percentage : 40!!<br />[ 2.448638] ld9040 ea8868_gamma_ctl 18 18<br />[ 2.448944] ld9040 lcdc_ld9040_panel_on - (1,1,1)<br />[ 2.455383] mdp4_csc_config: Block type 10 isn't supported by CSC.<br />[ 2.455474] mdp4_csc_config: Block type 8 isn't supported by CSC.<br />[ 2.475738] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=1)<br />[ 2.577392] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0<br />[ 2.594085] ld9040 lcdc_ld9040_panel_off + (1,1,1)<br />[ 2.732421] ld9040 : lcdc_config_gpios [0]<br />[ 2.732513] ld9040 start ld9040_disp_powerdown<br />[ 2.732604] ld9040 lcdc_ld9040_panel_off -<br />[ 2.732727] [kmj] lcdc_LD9040_panel_power:enable:0<br />[ 2.741455] [kmj] lcdc_LD9040_panel_power:enable:1<br />[ 2.742340] ld9040 lcdc_ld9040_panel_on + (0,0,0)<br />[ 2.742431] ld9040 : lcdc_config_gpios [1]<br />[ 2.742523] ld9040 start spi_init<br />[ 2.742614] ld9040 clk : 103, cs : 104, sdi : 106<br />[ 2.742706] ld9040 start ld9040_disp_powerup<br />[ 2.800933] ld9040 start ld9040_disp_on - HW Rev: 13<br />[ 2.806518] ld9040 LCD_M3 : 1<br />[ 2.813262] ld9040 ACL_cutoff_set Percentage : 40!!<br />[ 2.816436] ld9040 ea8868_gamma_ctl 18 18<br />[ 2.816741] ld9040 lcdc_ld9040_panel_on - (1,1,1)<br />[ 2.822845] mdp4_csc_config: Block type 10 isn't supported by CSC.<br />[ 2.822937] mdp4_csc_config: Block type 8 isn't supported by CSC.<br />[ 2.922454] sec_jack:sec_jack_det_irq_handler : ready = 1.<br />[ 2.923004] sec_jack: ear micbias off<br />[ 4.541107] charger: power supply battery (Battery) (action=change num_online=1 num_supplies=1)<br />[ 5.667785] charger: [5646] rebooting<br />[ 5.668945] SysRq : Emergency Remount R/O<br />[ 5.669982] Emergency Remount complete<br />[ 5.671936] (sec_debug_set_upload_magic) 0<br />[ 5.672912] set_dload_mode <0> ( C018224C )<br />[ 5.680816] pn544_shutdown <br />[ 5.685394] ld9040 start ld9040_shutdown<br />[ 5.686187] ld9040 lcdc_ld9040_panel_off + (1,1,1)<br />[ 5.821044] ld9040 : lcdc_config_gpios [0]<br />[ 5.821502] ld9040 start ld9040_disp_powerdown<br />[ 5.822265] ld9040 lcdc_ld9040_panel_off -<br />[ 5.825653] disable_charging_before_reset: check voltage(4187500)<br />[ 5.826416] smb328a 15-0034: smb328a_disable_charging :<br />[ 5.827819] smb328a 15-0034: smb328a_disable_charging : reg (0x31) = 0xad<br />[ 5.830261] smb328a_disable_charging : => reg (0x31) = 0xb9<br />[ 6.333740] disable_charging_before_reset: check voltage(4096250) after disable charging.<br />[ 6.335174] Disabling non-boot CPUs ...<br />[ 6.336242] set_freq_limit: 0x8 0, min 384000, max 1242000<br />[ 6.346496] Restarting system.<br />[ 6.346740] <br />[ 6.346984] Restarting Linux version 3.0.72-cyanogenmod-g888a0be (pinky-ghost@cyanogenmod) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Apr 29 17:15:55 PDT 2013<br />[ 6.347137] <br />[ 6.348846] set_dload_mode <0> ( C018241C )<br />[ 6.350006] Going down for restart now<br />[ 6.351104] pm8xxx_reset_pwr_off, [1]<br />[ 6.352233] pm8xxx_reset_pwr_off, [2]<br />[ 6.353332] pm8xxx_reset_pwr_off, [3]<br />[ 6.354492] pm8xxx_reset_pwr_off, [4]<br />[ 6.356506] pm8xxx_reset_pwr_off, [5]<br />[ 6.365661] pm8xxx_reset_pwr_off, [6]<br />[ 6.366760] pm8xxx_reset_pwr_off, [7]<br />[ 6.368774] pm8xxx_reset_pwr_off, [8]<br /><br />699 Corrected bytes, 0 unrecoverable blocks<br /></body></html>
Advertisement
Add Comment
Please, Sign In to add comment
