<6>[    0.000000@0] Booting Linux on physical CPU 0x200
<6>[    0.000000@0] Initializing cgroup subsys cpu
<6>[    0.000000@0] Initializing cgroup subsys cpuacct
<5>[    0.000000@0] Linux version 3.10.33-g0c943e2-dirty (it01@ubuntu) (gcc version 4.7.3 20130205 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.02-01-20130221 - Linaro GCC 2013.02) ) #1 SMP PREEMPT Tue Mar 15 21:04:13 CST 2016
<4>[    0.000000@0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
<4>[    0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<6>[    0.000000@0] Machine: Amlogic Meson8, model: AMLOGIC
<4>[    0.000000@0] physical memory start address is 0x200000
<6>[    0.000000@0] reserved_end is 1c2fffff
<6>[    0.000000@0]
<6>[    0.000000@0] Total memory is 2046 MiB
<6>[    0.000000@0] Reserved low memory from 0x06000000 to 0x1c2fffff, size: 355 MiB
<6>[    0.000000@0] 	mesonfb0(low)   	: 0x06100000 - 0x07900000 ( 24 MiB)
<6>[    0.000000@0] 	mesonfb1(low)   	: 0x07900000 - 0x07a00000 (  1 MiB)
<6>[    0.000000@0] 	deinterlace0(high)   	: 0x7df00000 - 0x80000000 ( 33 MiB)
<6>[    0.000000@0] 	mesonstream0(low)   	: 0x07a00000 - 0x09a00000 ( 32 MiB)
<6>[    0.000000@0] 	vdec0(low)   	: 0x09a00000 - 0x19a00000 (256 MiB)
<6>[    0.000000@0] 	ppmgr0(high)   	: 0x7bf00000 - 0x7df00000 ( 32 MiB)
<6>[    0.000000@0] 	vdin00(low)   	: 0x19a00000 - 0x19b00000 (  1 MiB)
<6>[    0.000000@0] 	vdin10(low)   	: 0x19b00000 - 0x1ab00000 ( 16 MiB)
<6>[    0.000000@0] 	amlvideo20(low)   	: 0x1ab00000 - 0x1c300000 ( 24 MiB)
<4>[    0.000000@0] get storage device: storage 2
<4>[    0.000000@0] value=2
<4>[    0.000000@0] get_storage_device : get storage device: storage 2
<4>[    0.000000@0] get_storage_device : value=2
<4>[    0.000000@0] [get_storage_device] storage_flag=2
<6>[    0.000000@0] cma: CMA: reserved 8 MiB at 2f000000
<6>[    0.000000@0] cma: Found region@0, memory base 0, size 18 MiB
<6>[    0.000000@0] cma: CMA: reserved 20 MiB at 2dc00000
<4>[    0.000000@0] Memory policy: ECC disabled, Data cache writealloc
<7>[    0.000000@0] On node 0 totalpages: 412672
<7>[    0.000000@0] free_area_init_node: node 0, pgdat c0c80ec0, node_mem_map c0f66000
<7>[    0.000000@0]   Normal zone: 1520 pages used for memmap
<7>[    0.000000@0]   Normal zone: 0 pages reserved
<7>[    0.000000@0]   Normal zone: 100096 pages, LIFO batch:31
<7>[    0.000000@0]   HighMem zone: 2442 pages used for memmap
<7>[    0.000000@0]   HighMem zone: 312576 pages, LIFO batch:31
<6>[    0.000000@0] Meson chip version = RevA (1D:A - 0:74E)
<6>[    0.000000@0] PERCPU: Embedded 9 pages/cpu @c1ef5000 s13120 r8192 d15552 u36864
<7>[    0.000000@0] pcpu-alloc: s13120 r8192 d15552 u36864 alloc=9*4096
<7>[    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<4>[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 411152
<5>[    0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200n8 no_console_suspend earlyprintk ramoops.mem_address=0x04e00000 ramoops.mem_size=0x100000 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive storage=2 cvbsdrv=0 vdaccfg=0xa000 logo=osd1,loaded,0x15100000,576cvbs,full hdmimode=1080p cvbsmode=576cvbs androidboot.firstboot=0 hdmitx= mac=c4:2f:ac:76:33:03
<4>[    0.000000@0] cvbs performance line = 0
<4>[    0.000000@0] cvbs trimming line = 0xa000
<4>[    0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0
<4>[    0.000000@0] osd1:1
<4>[    0.000000@0] loaded:268435459
<4>[    0.000000@0] logo has been loaded
<4>[    0.000000@0] 576cvbs:8
<4>[    0.000000@0] full:2
<4>[    0.000000@0] kernel get hdmimode form uboot is 1080p
<4>[    0.000000@0] kernel get cvbsmode form uboot is 576cvbs
<4>[    0.000000@0] ******** uboot setup mac-addr: c4:2f:ac:76:33:3
<6>[    0.000000@0] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000@0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000@0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000@0] Memory: 64MB 16MB 1532MB = 1612MB total
<5>[    0.000000@0] Memory: 1588556k/1588556k available, 62132k reserved, 1250304K highmem
<5>[    0.000000@0] Virtual kernel memory layout:
<5>[    0.000000@0]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000@0]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000@0]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
<5>[    0.000000@0]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
<5>[    0.000000@0]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000@0]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000@0]       .text : 0xc0008000 - 0xc0b6eccc   (11676 kB)
<5>[    0.000000@0]       .init : 0xc0b6f000 - 0xc0bcc340   ( 373 kB)
<5>[    0.000000@0]       .data : 0xc0bce000 - 0xc0c87de8   ( 744 kB)
<5>[    0.000000@0]        .bss : 0xc0c87de8 - 0xc0f61094   (2917 kB)
<6>[    0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>[    0.000000@0] Preemptible hierarchical RCU implementation.
<6>[    0.000000@0] NR_IRQS:256
<6>[    0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
<7>[    0.000000@0] Global timer: MESON TIMER-F (c0bed7c0) initialized
<6>[    0.000000@0] Switching to timer-based delay loop
<7>[    0.000000@0] meson_serial_console_setup
<6>[    0.000000@0] console [ttyS0] enabled
<6>[    0.392394@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
<6>[    0.402625@0] pid_max: default: 32768 minimum: 301
<6>[    0.407489@0] Security Framework initialized
<6>[    0.411629@0] SELinux:  Initializing.
<7>[    0.415247@0] SELinux:  Starting in permissive mode
<6>[    0.415321@0] Mount-cache hash table entries: 512
<6>[    0.423540@0] Initializing cgroup subsys debug
<6>[    0.424275@0] Initializing cgroup subsys freezer
<6>[    0.428884@0] CPU: Testing write buffer coherency: ok
<6>[    0.434218@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
<6>[    0.439659@0] Setting up static identity map for 0xc07da5e0 - 0xc07da638
<6>[    0.446404@0] L310 cache controller enabled
<6>[    0.450447@0] l2x0: 8 ways, 4096 sets, CACHE_ID 0x4100a0c9,  Cache size: 1048576 B
<6>[    0.457907@0]       AUX_CTRL 0x7ec80001, PERFETCH_CTRL 0x71000007, POWER_CTRL  0x00000000
<6>[    0.466021@0]       TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
<4>[    0.550161@0] write pen_release: 1
<4>[    0.550369@1] CPU1: Booted secondary processor
<6>[    0.550387@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
<4>[    0.570157@0] write pen_release: 2
<4>[    0.578284@2] CPU2: Booted secondary processor
<6>[    0.578293@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
<4>[    0.590148@0] write pen_release: 3
<4>[    0.598278@3] CPU3: Booted secondary processor
<6>[    0.598286@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
<6>[    0.598357@0] Brought up 4 CPUs
<6>[    0.611392@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
<6>[    0.617590@0] CPU: All CPU(s) started in SVC mode.
<6>[    0.622851@0] devtmpfs: initialized
<4>[    0.630861@0] clkrate [ xtal 	] : 24000000
<4>[    0.630889@0] clkrate [ pll_sys 	] : 1200000000
<4>[    0.634323@0] clkrate [ pll_fixed 	] : 2550000000
<4>[    0.638980@0] clkrate [ pll_vid 	] : 648000000
<4>[    0.643388@0] TODO: clk_get_rate_hpll() is not implement in M8 now
<4>[    0.649502@0] clkrate [ pll_hpll 	] : 0
<4>[    0.653303@0] clkrate [ pll_ddr 	] : 0
<4>[    0.657007@0] clkrate [ a9_clk 	] : 1200000000
<4>[    0.661412@0] clkrate [ clk81 	] : 141666666
<6>[    0.666390@0] pinctrl core: initialized pinctrl subsystem
<6>[    0.671163@0] regulator-dummy: no parameters
<6>[    0.676035@0] NET: Registered protocol family 16
<6>[    0.686405@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
<6>[    0.687995@0] ramoops: using module parameters
<4>[    0.692475@0] pstore przs=0xf0010000
<4>[    0.695831@0] pstore cprz=0xf0008000
<6>[    0.699825@0] console [pstore-1] enabled
<3>[    0.703257@0] ram_console: failed to create proc entry
<4>[    0.709408@0] VPU driver version: v03
<4>[    0.711970@0] vpu driver detect cpu type: m8m2
<4>[    0.716359@0] load vpu_clk in dts: 364000000Hz(7)
<4>[    0.721039@0] vpu_probe OK
<6>[    0.723932@0] cma: Assigned CMA region with name cma_0 to amvenc_avc.0 device
<6>[    0.732326@0] amlogic_gpio gpio: Probed amlogic GPIO driver
<4>[    0.736534@0] register lm device lm-root
<4>[    0.740203@0] register lm device lm1
<4>[    0.743731@0] register lm device lm0
<4>[    0.747354@0] Init pinux probe!
<6>[    0.750806@0] pinmux-m8 pinmux: Probed amlogic pinctrl driver
<4>[    0.756052@0] tv_init_module
<4>[    0.758883@0] major number 254 for disp
<4>[    0.762683@0] vout_register_server
<4>[    0.766037@0] register tv module server ok
<4>[    0.770116@0] major number 0 for disp
<4>[    0.773714@0] register tv module server ok
<4>[    0.777779@0] video2_early_init enter
<4>[    0.781397@0] video2_early_init exit
<6>[    0.784950@0] aml_i2c version: 20140813
<7>[    0.788761@0] plat->state_name:default
<7>[    0.788771@0] master_no = 0, master_regs=fe600500
<6>[    0.788847@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ed73d0a8)
<6>[    0.794771@0] aml-i2c i2c-AO: aml i2c bus driver.
<4>[    0.799476@0] aml_pmu_init, 458
<4>[    0.802545@0] call aml_dvfs_init in
<7>[    0.806007@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs
<7>[    0.806015@0] [DVFS]dvfs table of vcck_dvfs is:
<7>[    0.806020@0] [DVFS]     freq,    min_uV,    max_uV
<7>[    0.806025@0] [DVFS]    96000,    860000,    860000
<7>[    0.806029@0] [DVFS]   192000,    860000,    860000
<7>[    0.806034@0] [DVFS]   312000,    860000,    860000
<7>[    0.806038@0] [DVFS]   408000,    860000,    860000
<7>[    0.806042@0] [DVFS]   504000,    860000,    860000
<7>[    0.806046@0] [DVFS]   600000,    860000,    860000
<7>[    0.806051@0] [DVFS]   720000,    860000,    860000
<7>[    0.806055@0] [DVFS]   816000,    880000,    880000
<7>[    0.806059@0] [DVFS]  1008000,    930000,    930000
<7>[    0.806064@0] [DVFS]  1200000,    980000,    980000
<7>[    0.806068@0] [DVFS]  1416000,   1030000,   1030000
<7>[    0.806072@0] [DVFS]  1608000,   1100000,   1100000
<7>[    0.806076@0] [DVFS]  1800000,   1130000,   1130000
<7>[    0.806081@0] [DVFS]  1992000,   1140000,   1140000
<4>[    0.806134@0] hdmitx: system: amhdmitx_init
<4>[    0.810119@0] hdmitx: system: Ver: 2014May6
<4>[    0.814306@0] hdmitx: system: amhdmitx_probe
<4>[    0.818619@0] hdmitx: system: not find cec config
<4>[    0.823144@0] hdmitx: system: not find vend_init_data
<4>[    0.828221@0] hdmitx: system: gate/pwr cmd: 7
<4>[    0.832460@0] hdmitx: system: gate/pwr cmd: 1
<4>[    0.836765@0] hdmitx: system: hw init
<4>[    0.840861@1] hdmitx: system: reset intr mask
<4>[    0.860413@0] hdmitx: system: irq 1
<6>[    0.871654@0] bio: create slab <bio-0> at 0
<5>[    0.872066@0] SCSI subsystem initialized
<6>[    0.874193@0] usbcore: registered new interface driver usbfs
<6>[    0.879714@0] usbcore: registered new interface driver hub
<6>[    0.885203@0] usbcore: registered new device driver usb
<6>[    0.890360@0] Linux video capture interface: v2.00
<6>[    0.895066@0] pps_core: LinuxPPS API ver. 1 registered
<6>[    0.900139@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[    0.909367@0] PTP clock support registered
<4>[    0.913653@0] mode is 15,sync_duration_den=1,sync_duration_num=60
<4>[    0.919453@0] TV mode 1080p selected.
<4>[    0.923086@0] tvoutc_setmode[512]
<4>[    0.926351@0] tvoutc_setmode[523] mode is 15
<4>[    0.930583@0] vinfo mode is: 1080p
<4>[    0.933942@0] aml_logo: outputmode changed(8->15), reset osd1 scaler.
<4>[    0.970731@1] hdmitx: system: gate/pwr cmd: 4
<4>[    1.180654@1] hdmitx: system: gate/pwr cmd: 5
<4>[    1.180683@1] hdmitx: edid: edid ready
<4>[    1.183081@1] hdmitx: system: gate/pwr cmd: 4
<4>[    1.390653@1] hdmitx: system: gate/pwr cmd: 5
<4>[    1.390682@1] hdmitx: edid: edid ready
<4>[    1.393087@1] hdmitx: edid: check sum valid
<4>[    1.397223@1] hdmitx: edid: check sum valid
<4>[    1.401370@1] hdmitx: edid: blk0 raw data
<4>[    1.405330@1] 00ffffffffffff001e6d01000101010101130103807341780acf74a3574cb023
<4>[    1.412489@1] 09484ca1080081c00101010101010101010101010101662150b051001b304070
<4>[    1.419647@1] 36007e8a4200001e011d007251d01e206e2855007e8a4200001e000000fd0039
<4>[    1.426806@1] 3f1f3c09000a202020202020000000fc004c472054560a20202020202020011d
<4>[    1.433965@1]
<4>[    1.435604@1] hdmitx: edid: blk1 raw data
<4>[    1.439571@1] 020318f147102220058403022309070767030c002000b82d023a801871382d40
<4>[    1.446730@1] 582c04057e8a4200001e011d8018711c1620582c25007e8a4200009e011d0072
<4>[    1.453888@1] 51d01e206e2855007e8a4200001e8c0ad08a20e02d10103e96007e8a42000018
<4>[    1.461047@1] 263680a070381f40302025007e8a4200001a000000000000000000000000001c
<4>[    1.468206@1]
<4>[    1.470209@1] hdmitx: edid: find IEEEOUT
<4>[    1.473764@1] hdmitx: video: get current mode: 1080p
<4>[    1.478649@1] is_similar_hdmi_vic[326] vic_old=0,mode_new=15
<4>[    1.484257@1] hdmitx: system: gate/pwr cmd: 7
<4>[    1.488607@1] hdmitx: system: already init VIC = 0  Now VIC = 16
<4>[    1.494524@1] hdmitx: system:  16 (cd0,cs0,pm1,vd0,1)
<4>[    1.499602@1] hdmitx: system: gate/pwr cmd: 0
<4>[    1.503922@1] hdmitx: system: hw reset
<4>[    1.508665@1] hdmitx: audio: SPDIF
<4>[    1.511045@1] hdmitx: system: reconfig packet setting done
<4>[    1.536410@1] hdmitx: system: set pll
<4>[    1.536435@1] hdmitx: system: param->VIC:16
<4>[    1.538580@1] mode is: 15
<4>[    1.541172@1] VPU_VIU_VENC_MUX_CTRL: 0x22a
<4>[    1.545219@1] viu chan = 1
<4>[    1.547893@1] VPU_VIU_VENC_MUX_CTRL: 0x22a
<4>[    1.551952@1] config HPLL
<4>[    1.554535@1] set_hpll_clk_out[81] clk = 2970
<4>[    1.569238@0] call aml_pmu_probe_init in
<4>[    1.569395@0] get property:                  use_pwm, value:0x00000001, dec:       1
<4>[    1.575224@0] get property:              table_count, value:0x0000001d, dec:      29
<4>[    1.580414@1] config HPLL done
<4>[    1.580422@1] enc_vpu_bridge_reset[292]
<4>[    1.589703@0] meson_cs_dvfs_probe, table count:29, use_pwm:1, pwm controller:2
<4>[    1.596857@0]  0, 001c0000,  860000
<4>[    1.600307@0]  1, 001b0001,  870000
<4>[    1.603749@0]  2, 001a0002,  880000
<4>[    1.607199@0]  3, 00190003,  890000
<4>[    1.610654@0]  4, 00180004,  900000
<4>[    1.614099@0]  5, 00170005,  910000
<4>[    1.617552@0]  6, 00160006,  920000
<4>[    1.621004@0]  7, 00150007,  930000
<4>[    1.624449@0]  8, 00140008,  940000
<4>[    1.627899@0]  9, 00130009,  950000
<4>[    1.631354@0] 10, 0012000a,  960000
<4>[    1.634801@0] 11, 0011000b,  970000
<4>[    1.638248@0] 12, 0010000c,  980000
<4>[    1.641704@0] 13, 000f000d,  990000
<4>[    1.645149@0] 14, 000e000e, 1000000
<4>[    1.648602@0] 15, 000d000f, 1010000
<4>[    1.652054@0] 16, 000c0010, 1020000
<4>[    1.655499@0] 17, 000b0011, 1030000
<4>[    1.658949@0] 18, 000a0012, 1040000
<4>[    1.662404@0] 19, 00090013, 1050000
<4>[    1.665852@0] 20, 00080014, 1060000
<4>[    1.669299@0] 21, 00070015, 1070000
<4>[    1.672754@0] 22, 00060016, 1080000
<4>[    1.676199@0] 23, 00050017, 1090000
<4>[    1.679649@0] 24, 00040018, 1100000
<4>[    1.683107@0] 25, 00030019, 1110000
<4>[    1.686549@0] 26, 0002001a, 1120000
<4>[    1.689998@0] 27, 0001001b, 1130000
<4>[    1.693453@0] 28, 0000001c, 1140000
<4>[    1.696931@0] get pin for pwm--------
<7>[    1.700534@0] [DVFS]aml_dvfs_register_driver, driver meson-cs-dvfs regist success, mask:1, source id:1
<6>[    1.700678@0] Advanced Linux Sound Architecture Driver Initialized.
<6>[    1.707017@0] Bluetooth: Core ver 2.16
<6>[    1.710480@0] NET: Registered protocol family 31
<6>[    1.715017@0] Bluetooth: HCI device and connection manager initialized
<6>[    1.721494@0] Bluetooth: HCI socket layer initialized
<6>[    1.726486@0] Bluetooth: L2CAP socket layer initialized
<4>[    1.730408@1] hdmitx: system: phy setting done
<4>[    1.730411@1] Sink is HDMI device
<4>[    1.730416@1] No sink attached
<4>[    1.730460@1] hdmitx: audio: audio channel num is 0
<4>[    1.730465@1] hdmitx: audio: SPDIF
<4>[    1.730477@1] hdmitx: audio: current VIC: 16
<4>[    1.730479@1] hdmitx: audio: audio sample rate: 0
<4>[    1.730480@1] hdmitx: audio: set audio N para
<4>[    1.730487@1] hdmitx: audio: PCM out to HDMI
<4>[    1.750953@1] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
<4>[    1.750955@1] hdmitx: audio: i2s_to_spdif_flag:1
<4>[    1.750956@1] hdmitx: audio: Enable audio spdif to HDMI
<4>[    1.751010@1] hdmitx: audio: audio channel num is 0
<4>[    1.751014@1] hdmitx: audio: SPDIF
<4>[    1.751025@1] hdmitx: audio: current VIC: 16
<4>[    1.751026@1] hdmitx: audio: audio sample rate: 0
<4>[    1.751028@1] hdmitx: audio: set audio N para
<4>[    1.751035@1] hdmitx: audio: PCM out to HDMI
<4>[    1.771503@1] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
<4>[    1.771505@1] hdmitx: audio: i2s_to_spdif_flag:1
<4>[    1.771506@1] hdmitx: audio: Enable audio spdif to HDMI
<4>[    1.771558@1] hdmitx: cec: CEC not ready
<4>[    1.771561@1] hdmi detect: plug.
<6>[    1.831734@0] Bluetooth: SCO socket layer initialized
<6>[    1.836862@0] cfg80211: Calling CRDA to update world regulatory domain
<6>[    1.844493@0] Switching to clocksource Timer-E
<6>[    1.861572@0] NET: Registered protocol family 2
<6>[    1.861971@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
<6>[    1.867710@0] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
<6>[    1.874232@0] TCP: Hash tables configured (established 4096 bind 4096)
<6>[    1.880703@0] TCP: reno registered
<6>[    1.884026@0] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    1.889990@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    1.896504@0] NET: Registered protocol family 1
<4>[    1.900933@0] wifi_dev_probe
<4>[    1.903686@0] wifi_dt : interrupt_pin=GPIOX_21
<4>[    1.908098@0] wifi_dt : irq_num=null
<4>[    1.911619@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
<4>[    1.916712@0] wifi_dt : power_on_pin=GPIOAO_6
<4>[    1.921036@0] wifi_dt : power_on_pin2=GPIOX_11
<4>[    1.925421@0] interrupt_pin=133, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=0
<6>[    1.934166@0] Unpacking initramfs...
<6>[    1.985036@0] Freeing initrd memory: 1096K (c4e09000 - c4f1b000)
<6>[    1.986725@0] audit: initializing netlink socket (disabled)
<5>[    1.990984@0] type=2000 audit(1.770:1): initialized
<7>[    1.996129@1] balance_pgdat end zone=0, pgdat_is_balanced=0
<4>[    1.996235@0] bounce pool size: 64 pages
<5>[    2.002639@0] VFS: Disk quotas dquot_6.5.2
<4>[    2.003824@0] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>[    2.011479@0] exFAT: Core Version 1.2.4
<6>[    2.014128@0] exFAT: FS Version 1.2.4
<6>[    2.018457@0] NTFS driver 2.1.30 [Flags: R/O].
<6>[    2.022319@0] fuse init (API version 7.22)
<6>[    2.026556@0] msgmni has been set to 718
<7>[    2.030126@0] SELinux:  Registering netfilter hooks
<6>[    2.031086@0] NET: Registered protocol family 38
<6>[    2.034780@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
<6>[    2.042175@0] io scheduler noop registered
<6>[    2.046215@0] io scheduler deadline registered
<6>[    2.050754@0] io scheduler cfq registered (default)
<6>[    2.057880@0] loop: module loaded
<6>[    2.059098@0] tun: Universal TUN/TAP device driver, 1.6
<6>[    2.063893@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<4>[    2.070591@0] ethernet base addr is fe0c0000
<4>[    2.074424@0] key device don't create,extenal_api_key_set_version:2052
<4>[    2.080897@0] ret = -22
<4>[    2.080897@0] print_buff=
<6>[    2.085920@0] stmmac - user ID: 0x11, Synopsys ID: 0x37
<6>[    2.091069@0]  Normal descriptors
<6>[    2.094339@0]  Ring mode enabled
<6>[    2.097530@0]  DMA HW capability register supported
<6>[    2.102201@0]  RX Checksum Offload Engine supported (type 2)
<6>[    2.107973@0]  TX Checksum insertion supported
<6>[    2.112364@0]  Wake-Up On Lan supported
<6>[    2.116186@0]  Enable RX Mitigation via HW Watchdog Timer
<6>[    2.139879@0] libphy: stmmac: probed
<6>[    2.139910@0] eth0: PHY ID 001cc916 at 0 IRQ 0 (stmmac-0:00) active
<6>[    2.144038@0] eth0: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01) active
<6>[    2.150585@0] PPP generic driver version 2.4.2
<6>[    2.155022@0] PPP BSD Compression module registered
<6>[    2.159746@0] PPP Deflate Compression module registered
<6>[    2.164920@0] PPP MPPE Compression module registered
<6>[    2.169835@0] NET: Registered protocol family 24
<6>[    2.174451@0] usbcore: registered new interface driver asix
<6>[    2.179997@0] usbcore: registered new interface driver ax88179_178a
<6>[    2.186156@0] usbcore: registered new interface driver cdc_ether
<6>[    2.192114@0] usbcore: registered new interface driver dm9601
<6>[    2.197812@0] usbcore: registered new interface driver net1080
<6>[    2.203575@0] usbcore: registered new interface driver cdc_subset
<6>[    2.209621@0] usbcore: registered new interface driver zaurus
<6>[    2.215325@0] usbcore: registered new interface driver cdc_ncm
<6>[    2.221093@0] usbcore: registered new interface driver qf9700
<6>[    2.226773@0] usbcore: registered new interface driver sr9600
<6>[    2.232610@0] usbcore: registered new interface driver cdc_acm
<6>[    2.238234@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    2.246363@0] usbcore: registered new interface driver usb-storage
<6>[    2.252528@0] usbcore: registered new interface driver usbserial
<6>[    2.258437@0] usbcore: registered new interface driver option
<6>[    2.264118@0] usbserial: USB Serial support registered for GSM modem (1-port)
<6>[    2.271381@0] mousedev: PS/2 mouse device common for all mice
<6>[    2.277056@0] usbcore: registered new interface driver xpad
<6>[    2.282429@0] usbcore: registered new interface driver usb_acecad
<6>[    2.288456@0] usbcore: registered new interface driver aiptek
<6>[    2.294134@0] usbcore: registered new interface driver gtco
<6>[    2.299671@0] usbcore: registered new interface driver hanwang
<6>[    2.305439@0] usbcore: registered new interface driver kbtab
<6>[    2.311052@0] usbcore: registered new interface driver wacom
<6>[    2.316707@0] i2c /dev entries driver
<6>[    2.320391@0] usbcore: registered new interface driver uvcvideo
<6>[    2.326110@0] USB Video Class driver (1.1.1)
<6>[    2.330513@0] device-mapper: uevent: version 1.0.3
<6>[    2.335257@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
<6>[    2.343781@0] Bluetooth: HCI UART driver ver 2.2
<6>[    2.348207@0] Bluetooth: HCI H4 protocol initialized
<6>[    2.353315@0] hidraw: raw HID events driver (C) Jiri Kosina
<6>[    2.359999@0] usbcore: registered new interface driver usbhid
<6>[    2.364319@0] usbhid: USB HID core driver
<6>[    2.368613@0] zram: Created 1 device(s) ...
<6>[    2.372690@0] ashmem: initialized
<6>[    2.375817@0] logger: created 256K log 'log_main'
<6>[    2.380490@0] logger: created 256K log 'log_events'
<6>[    2.385299@0] logger: created 256K log 'log_radio'
<6>[    2.390061@0] logger: created 256K log 'log_system'
<4>[    2.394911@0] vout_init_module
<4>[    2.397841@0] start init vout module
<4>[    2.401347@0] create  vout attribute ok
<4>[    2.405440@0] ge2d_init
<4>[    2.407533@0] ge2d_dev major:243
<4>[    2.410839@0] ge2d start monitor
<4>[    2.413965@0] osd_init
<4>[    2.413973@1] ge2d workqueue monitor start
<4>[    2.420352@0] osd_probe, vinfo:c083841c
<4>[    2.424263@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
<4>[    2.432216@0] osd_probe, mydef_var:c0c20b1c, vinfo:c083841c
<4>[    2.437732@0] init fbdev bpp is :32
<4>[    2.441167@0] ---------------clear framebuffer0 memory
<4>[    2.464874@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0400000, size=1024K
<4>[    2.467302@0] osd_probe, mydef_var:c0c20b1c, vinfo:c083841c
<4>[    2.472833@0] don't find to display_size_default from mesonfb-dts
<4>[    2.478867@0] init fbdev bpp is :16
<4>[    2.498124@0] osd probe ok
<4>[    2.498223@0] osd_ext_init
<4>[    2.498443@0] vout2_init_module enter
<6>[    2.501563@0] enter aml_sysled_init
<6>[    2.505315@0] amlvideo-000: V4L2 device registered as video10
<6>[    2.510799@0] amlvideo2: V4L2 device registered as video11
<6>[    2.516234@0] ionvideo-000: V4L2 device registered as video13
<6>[    2.521781@0] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.
<7>[    2.530143@0] DI: di_init
<7>[    2.530177@0] DI: di_probe
<4>[    2.530496@0] aml_wdt_driver_init,301
<6>[    2.533762@0] ** disable watchdog
<6>[    2.537154@0] keys===========================================
<4>[    2.542768@0] keys_devno=f000000
<6>[    2.546004@0] securitykey: device aml_keys created
<4>[    2.550697@0] amlkeys=0
<6>[    2.553103@0] platform_driver_register--aml_keys_driver--------------------
<4>[    2.560199@0] set uart_ao pinmux use pinctrl subsystem
<4>[    2.565072@0] P_AO_RTI_PIN_MUX_REG:5860
<5>[    2.568907@0] start uart_ao_ttyS0:(irq = 122)
<5>[    2.573174@0] register uart_ao ok
<4>[    2.576596@0] set uart_a pinmux use pinctrl subsystem
<4>[    2.581487@0] P_AO_RTI_PIN_MUX_REG:5860
<5>[    2.585259@0] start uart_a_ttyS1:(irq = 58)
<5>[    2.589411@0] register uart_a ok
<5>[    2.592713@0] start uart_d_ttyS4:(irq = 126)
<5>[    2.596806@0] register uart_d ok
<6>[    2.600114@0] dwc_otg: version 3.10a 12-MAY-2014
<7>[    2.604585@0] dwc_otg lm-root: dwc_otg_driver_probe(ed774400)
<4>[    2.604593@0] dwc_otg_driver_probe NOT match
<7>[    2.608836@0] dwc_otg lm1: dwc_otg_driver_probe(ed774600)
<6>[    2.608851@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
<5>[    2.617345@0] USB (1) use clock source: XTAL input
<7>[    2.623151@0] dwc_otg lm1: base=0xfe080000
<7>[    2.623159@0] dwc_otg lm1: dwc_otg_device=0xed9ba840
<4>[    2.643213@0] Core Release: 3.10a
<4>[    2.643241@0] Setting default values for core params
<4>[    2.645819@0] curmode: 1, host_only: 1
<7>[    2.649563@0] dwc_otg lm1: DMA config: BURST_DEFAULT
<4>[    2.669671@0] Using Buffer DMA mode
<4>[    2.669699@0] OTG VER PARAM: 1, OTG VER FLAG: 1
<4>[    2.672016@0] Working on port type = HOST
<6>[    2.676729@0] dwc_otg lm1: DWC OTG Controller
<6>[    2.680345@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
<6>[    2.686959@0] dwc_otg lm1: irq 63, io mem 0x00000000
<4>[    2.691880@0] -------hcd->flags.d32 = 0
<4>[    2.695666@0] Init: Port Power? op_state=1
<4>[    2.699733@0] Init1: Power Port (0)
<6>[    2.703245@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    2.710083@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    2.717390@0] usb usb1: Product: DWC OTG Controller
<6>[    2.722237@0] usb usb1: Manufacturer: Linux 3.10.33 dwc_otg_hcd
<6>[    2.728101@0] usb usb1: SerialNumber: lm1
<6>[    2.732358@0] hub 1-0:1.0: USB hub found
<6>[    2.735935@0] hub 1-0:1.0: 1 port detected
<7>[    2.740166@0] dwc_otg lm0: dwc_otg_driver_probe(ed774800)
<6>[    2.740194@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
<5>[    2.748563@0] USB (0) use clock source: XTAL input
<7>[    2.754264@0] dwc_otg lm0: base=0xfe040000
<7>[    2.754270@0] dwc_otg lm0: dwc_otg_device=0xed9bf180
<4>[    2.774326@0] Core Release: 3.10a
<4>[    2.774353@0] Setting default values for core params
<4>[    2.776933@0] curmode: 1, host_only: 0
<7>[    2.820641@0] dwc_otg lm0: DMA config: BURST_DEFAULT
<4>[    2.840750@0] Using Buffer DMA mode
<4>[    2.840779@0] OTG VER PARAM: 1, OTG VER FLAG: 1
<4>[    2.843093@0] Working on port type = OTG
<4>[    2.846974@0] Current port type: SLAVE
<6>[    2.850829@0] dwc_otg lm0: DWC OTG Controller
<6>[    2.855008@0] dwc_otg lm0: new USB bus registered, assigned bus number 2
<6>[    2.861679@0] dwc_otg lm0: irq 62, io mem 0x00000000
<6>[    2.866597@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    2.873483@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    2.880808@0] usb usb2: Product: DWC OTG Controller
<6>[    2.885619@0] usb usb2: Manufacturer: Linux 3.10.33 dwc_otg_hcd
<6>[    2.891502@0] usb usb2: SerialNumber: lm0
<6>[    2.895714@0] hub 2-0:1.0: USB hub found
<6>[    2.899370@0] hub 2-0:1.0: 1 port detected
<4>[    2.903505@0] Dedicated Tx FIFOs mode
<4>[    2.907219@0] using timer detect id change, ed9ce400
<4>[    2.912052@0] boot_device_flag : -1
<4>[    2.915374@0] do not init nand
<4>[    2.918920@0] Amlogic A/V streaming port init
<4>[    2.923469@0] buffersize=262144,0,start=0
<4>[    2.926677@0] Subtitle stbuf alloced at 0xece00000, size = 262144
<4>[    2.932755@2] HOST mode
<4>[    2.932763@0] changed the (2) buffer size from 0 to 262144
<4>[    2.932889@0] init vdec memsource 9a00000->199fffff
<4>[    2.932972@0] [tsync_pcr_init]init success.
<4>[    2.932973@0] amvideocap_init_module
<4>[    2.933072@0] regist mpeg12 codec profile
<4>[    2.933105@0] regist mpeg4 codec profile
<4>[    2.933106@0] amvdec_vc1 module init
<4>[    2.933143@0] regist vc1 codec profile
<4>[    2.933144@0] amvdec_h264 module init
<4>[    2.933200@0] regist h264 codec profile
<4>[    2.933202@0] amvdec_h264mvc module init
<4>[    2.933233@0] regist hmvc codec profile
<4>[    2.933235@0] amvdec_h264_4k2k module init
<4>[    2.933267@0] regist h264_4k2k codec profile
<4>[    2.933268@0] amvdec_h265 module init
<4>[    2.933300@0] regist hevc codec profile
<4>[    2.933331@0] regist mjpeg codec profile
<4>[    2.933333@0] amvdec_real module init
<4>[    2.933364@0] amvdec_avs module init
<4>[    2.933448@0] amvenc_avc memory resource undefined.
<4>[    2.933450@0] encode_wq_init.
<4>[    2.933457@0] encode start monitor.
<4>[    2.933511@1] encode workqueue monitor start.
<4>[    2.933661@0] jpegenc module init
<4>[    2.933848@0] picdec buffer size is 4000000
<4>[    2.933958@0] alloc_keep_buffer keep_y_addr eca00000
<4>[    2.933971@0] alloc_keep_buffer keep_u_addr ecf00000
<4>[    2.933978@0] alloc_keep_buffer keep_v_addr ece80000
<4>[    2.933981@0] yaddr=eca00000,u_addr=ecf00000,v_addr=ece80000
<4>[    2.934180@0] create_ge2d_work_queue video task ok
<4>[    2.934183@0] video2_init enter
<4>[    2.934472@0]
<4>[    2.934472@0]
<4>[    2.934472@0]  VECM init
<4>[    2.934472@0]
<6>[    2.934612@0] efuse===========================================
<6>[    2.934693@0] efuse: device efuse created
<6>[    2.934737@0] efuse--------------------------------------------
<6>[    2.934739@0] SARADC Driver init.
<4>[    2.934813@0] __saradc_probe__
<4>[    2.937675@1] Indeed it is in host mode hprt0 = 00021501
<4>[    3.077728@1] saradc calibration: ref_val = 510
<4>[    3.077730@1] saradc calibration: ref_nominal = 512
<4>[    3.077731@1] saradc calibration: coef = 4177
<4>[    3.077926@1] irblaster probe
<6>[    3.078035@1] Remote Driver
<4>[    3.078095@1] Remote platform_data g_remote_base=fe600580
<4>[    3.078125@1] set drvdata completed
<4>[    3.078131@1] device_create_file completed
<6>[    3.078435@1] input: aml_keypad as /devices/platform/meson-remote/input/input0
<4>[    3.078605@1] input_register_device completed
<4>[    3.078644@1] [0xffffff00] = 0x1dd0190
<4>[    3.078646@1] [0xffffff04] = 0xf800ca
<4>[    3.078648@1] [0xffffff08] = 0x82006e
<4>[    3.078650@1] [0xffffff0c] = 0x3c0030
<4>[    3.078651@1] [0xffffff10] = 0x30fa0013
<4>[    3.078653@1] [0xffffff18] = 0x6f19000
<4>[    3.078654@1] [0xffffff1c] = 0xbe40
<4>[    3.078655@1] [0x0] = 0xfa00a0
<4>[    3.078657@1] [0x4] = 0xfa00a0
<4>[    3.078658@1] [0x8] = 0xfa00a0
<4>[    3.078659@1] [0xc] = 0x640030
<4>[    3.078661@1] [0x10] = 0x30fa0013
<4>[    3.078662@1] [0x18] = 0x961b800
<4>[    3.078664@1] [0x1c] = 0x9740
<4>[    3.078665@1] [0x20] = 0x104
<4>[    3.078666@1] [0x24] = 0x0
<4>[    3.078668@1] [0x28] = 0x0
<4>[    3.078670@1] set_remote_mode[69]
<4>[    3.078685@1] remote config major:233
<4>[    3.078762@1] physical address:0x2d076000
<6>[    3.078794@1] ADC Keypad Driver init.
<4>[    3.078868@1] ==touch_ts_init==
<4>[    3.078936@1] ==ft5x0x_ts_init==
<4>[    3.078955@1] ==goodix_ts_init==
<4>[    3.078991@1] i2c-core: driver [gslx680_compatible] using legacy suspend method
<4>[    3.078993@1] i2c-core: driver [gslx680_compatible] using legacy resume method
<6>[    3.079009@1] !!!ntp_ts: ret = 0.
<4>[    3.079011@1] VTL ct36x TouchScreen driver, <george.chen@vtl.com.cn>.
<4>[    3.079025@1] i2c-core: driver [ct36x] using legacy suspend method
<4>[    3.079026@1] i2c-core: driver [ct36x] using legacy resume method
<4>[    3.079028@1] VTL ct36x TouchScreen driver End.
<4>[    3.079030@1] ==gsl_ts_init==
<4>[    3.079045@1] ret=0
<4>[    3.079153@1] i2c-core: driver [mir3da] using legacy suspend method
<4>[    3.079155@1] i2c-core: driver [mir3da] using legacy resume method
<4>[    3.079171@1] i2c-core: driver [lis3dh_acc] using legacy suspend method
<4>[    3.079172@1] i2c-core: driver [lis3dh_acc] using legacy resume method
<4>[    3.079205@1] i2c-core: driver [bma222] using legacy suspend method
<4>[    3.079207@1] i2c-core: driver [bma222] using legacy resume method
<4>[    3.079236@1] i2c-core: driver [dmard06] using legacy suspend method
<4>[    3.079237@1] i2c-core: driver [dmard06] using legacy resume method
<6>[    3.079253@1] lsm303d driver: init
<4>[    3.079280@1] i2c-core: driver [dmard10] using legacy suspend method
<4>[    3.079282@1] i2c-core: driver [dmard10] using legacy resume method
<4>[    3.079298@1] stk8313_init
<4>[    3.079312@1] ======stk831x init ok======
<4>[    3.079314@1] stk831x_init
<6>[    3.079329@1] mxc622x accelerometer driver: init
<4>[    3.079342@1] i2c-core: driver [mxc622x] using legacy suspend method
<4>[    3.079344@1] i2c-core: driver [mxc622x] using legacy resume method
<6>[    3.079346@1] mxc6255xc accelerometer driver: init
<4>[    3.079365@1] i2c-core: driver [mxc6255xc] using legacy suspend method
<4>[    3.079366@1] i2c-core: driver [mxc6255xc] using legacy resume method
<4>[    3.079411@1] cm3217 v.1.0.0.1
<4>[    3.079426@1] i2c-core: driver [elan_epl6814] using legacy suspend method
<4>[    3.079428@1] i2c-core: driver [elan_epl6814] using legacy resume method
<4>[    3.079443@1] i2c-core: driver [LTR501] using legacy suspend method
<4>[    3.079445@1] i2c-core: driver [LTR501] using legacy resume method
<6>[    3.079491@1] GPIO Keypad Driver init.
<4>[    3.079562@1] spi_nor_init
<4>[    3.079619@1] amlogic_spi_nor_probe:
<4>[    3.079625@1] amlogic_spi->state_name:default
<6>[    3.079689@1] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated
<4>[    3.079735@1] check_storage_device : spi boot_device_flag : -1
<4>[    3.079736@1] spi_nor_probe
<4>[    3.079738@1] spi_nor_probe 629 boot_device_flag 2 : do not init spi
<4>[    3.079745@1] spi_nor: probe of apollospi:32766 failed with error -12
<4>[    3.079748@1] amlogic_spi_nor_probe over
<4>[    3.079827@1] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
<6>[    3.117631@1] usb 1-1: new high-speed USB device number 2 using dwc_otg
<4>[    3.119057@0] Indeed it is in host mode hprt0 = 00001101
<6>[    3.325163@0] usb 1-1: New USB device found, idVendor=058f, idProduct=6387
<6>[    3.325168@0] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[    3.325172@0] usb 1-1: Product: Mass Storage
<6>[    3.325175@0] usb 1-1: Manufacturer: Generic
<6>[    3.325178@0] usb 1-1: SerialNumber: 0A8010B005A1BEE08BFC
<6>[    3.325536@0] usb-storage 1-1:1.0: USB Mass Storage device detected
<4>[    3.506361@1] host->base fe108c20
<4>[    3.509346@1] pdata->caps 7
<4>[    3.512049@1] pdata->caps2 0
<4>[    3.514896@1] get property:                     port, value:0x00000001
<4>[    3.521383@1] get property:                ocr_avail, value:0x00200000
<4>[    3.527620@2] -------hcd->flags.d32 = 0
<4>[    3.527643@2] Init: Port Power? op_state=1
<4>[    3.527644@2] Init1: Power Port (0)
<4>[    3.527647@2] set usb port power on (board gpio 15)!
<4>[    3.544068@1] get property:                    f_min, value:0x000493e0
<4>[    3.550531@1] get property:                    f_max, value:0x02faf080
<6>[    3.550633@0] scsi0 : usb-storage 1-1:1.0
<4>[    3.560960@1] get property:                  f_max_w, value:0x02faf080
<4>[    3.567420@1] get property:             max_req_size, value:0x00020000
<4>[    3.573896@1] get property:                   irq_in, value:0x00000003
<4>[    3.580364@1] get property:                  irq_out, value:0x00000005
<4>[    3.586831@1] get property:                  gpio_cd, str:CARD_6
<4>[    3.592787@1] get property:                  gpio_ro, str:GPIOZ_0
<4>[    3.598835@1] get property:                  pinname, str:sd
<4>[    3.604423@1] get property:                 jtag_pin, str:CARD_0
<4>[    3.610381@1] get property:                card_type, value:0x00000005
<4>[    3.616842@1] get property:                gpio_dat3, str:CARD_4
<4>[    3.657651@1]  reg:2620,clearmask=80008,setmask=10001
<4>[    3.657693@1] reg:2621,clearmask=ff000000,set pin=64
<4>[    3.661976@1] reg:2623,clearmask=7000,setmask=7
<4>[    3.666462@1]  reg:2620,clearmask=200020,setmask=1
<4>[    3.671205@1] reg:2622,clearmask=ff00,set pin=64
<4>[    3.675776@1] reg:2623,clearmask=700000,setmask=7
<4>[    3.687667@2] pdata->caps 107
<4>[    3.687698@2] pdata->caps2 0
<4>[    3.687851@2] get property:                     port, value:0x00000000
<4>[    3.694321@2] get property:                ocr_avail, value:0x00200000
<4>[    3.700802@2] get property:                    f_min, value:0x000493e0
<4>[    3.707258@2] get property:                    f_max, value:0x02faf080
<4>[    3.713747@2] get property:             max_req_size, value:0x00020000
<4>[    3.720206@2] get property:                  pinname, str:sdio
<4>[    3.725974@2] get property:                card_type, value:0x00000003
<4>[    3.857623@2] [aml_sdio_probe] aml_sdio_probe() success!
<4>[    3.858826@2] host->base fe108e00
<4>[    3.860612@2] pdata->caps 80000147
<4>[    3.863933@2] pdata->caps2 20
<4>[    3.866864@2] get property:                     port, value:0x00000005
<4>[    3.873355@2] get property:                ocr_avail, value:0x00200080
<4>[    3.879816@2] get property:                    f_min, value:0x000493e0
<4>[    3.886270@2] get property:                    f_max, value:0x05f5e100
<4>[    3.892763@1] get property:             max_req_size, value:0x00020000
<4>[    3.899224@1] get property:                  pinname, str:emmc
<4>[    3.904987@1] get property:                card_type, value:0x00000001
<4>[    3.907630@0] Indeed it is in host mode hprt0 = 00021501
<4>[    3.916726@1] get property:                gpio_dat3, str:BOOT_3
<4>[    3.922676@1] [is_emmc_exist] host->storage_flag=2, POR_BOOT_VALUE=3
<4>[    3.967636@2] aml_emmc_hw_reset 1338
<4>[    3.975353@1] mmc_init_card
<4>[    4.027613@1] [aml_sdhc_probe] aml_sdhc_probe() success!
<6>[    4.027709@1] [dsp]DSP start addr 0xc5e00000
<6>[    4.031525@1] [dsp]register dsp to char divece(257)
<6>[    4.036572@1] amlogic audio spdif interface device init!
<4>[    4.041692@1] device name=nand_key open error
<3>[    4.046025@1] aml_keys: version 0 can not be init c0c25d04
<4>[    4.051458@1] device name=emmc_key open error
<3>[    4.055842@1] aml_keys: version 0 can not be init c0c25d04
<6>[    4.061905@1] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
<7>[    4.069718@1] [AML1216]call aml1216_battery_init, ret = 0
<7>[    4.069761@1] [AML1218]call aml1218_battery_init, ret = 0
<7>[    4.069799@1] [RN5T618]call rn5t618_battery_init, ret = 0
<6>[    4.069817@1] vdin_drv_init: major 231
<6>[    4.071146@1] vdin0 mem_start = 0x19a00000, mem_size = 0x100000
<6>[    4.076907@3] emmc: BKOPS_EN bit is not set
<6>[    4.076913@1] vdin_drv_probe: driver initialized ok
<6>[    4.077015@1] vdin1 mem_start = 0x19b00000, mem_size = 0x1000000
<6>[    4.077025@1] vdin_drv_probe: driver initialized ok
<4>[    4.077080@1] amvdec_656in module: init.
<4>[    4.077084@1] amvdec_656in_init_module:major 230
<4>[    4.077305@1] amvdec_656in probe ok.
<4>[    4.077507@1] amvdec_csi probe ok.
<4>[    4.077523@1] [viuin..]viuin_init_module viuin module init
<4>[    4.077647@1] [viuin..]viuin_probe probe ok.
<6>[    4.077831@1] [isp..]isp_probe isp probe ok.
<4>[    4.077846@1] [sii9233a_drv_init] Ver: 2013Nov12
<6>[    4.078485@1] amaudio2: device amaudio2 created
<4>[    4.078653@1] amlogic rfkill init
<7>[    4.078688@1] enter bt_probe of_node
<4>[    4.078693@1] not get gpio_en
<4>[    4.078694@1] not get gpio_wake
<6>[    4.087640@0] usb 2-1: new full-speed USB device number 2 using dwc_otg
<4>[    4.087945@0] Indeed it is in host mode hprt0 = 00021501
<3>[    4.156091@3] ###check hw reset function is already enabled here
<4>[    4.162716@1] Activate high speed
<6>[    4.171891@1] emmc: new HS200 MMC card at address 0001, clock 85000000, 8-bit-bus-width
<6>[    4.174489@1] mmcblk0: emmc:0001 8WPD3R 7.28 GiB
<6>[    4.179022@1] mmcblk0boot0: emmc:0001 8WPD3R partition 1 4.00 MiB
<6>[    4.185039@1] mmcblk0boot1: emmc:0001 8WPD3R partition 2 4.00 MiB
<6>[    4.191712@1]  mmcblk0: p1
<4>[    4.193914@1] Delete invalid mbr partition part ed060a00, part->partno 1
<4>[    4.200660@1] emmc read lba=0x12000, blocks=0x1 OK!
<4>[    4.205379@1] emmc read lba=0x12001, blocks=0x1 OK!
<4>[    4.209964@1] [mmc_read_partition_tbl] mmc read partition OK!
<4>[    4.215631@1] add_emmc_partition
<4>[    4.218966@1] [mmcblk0p01]           bootloader  offset 0x000000000000, size 0x000000400000
<4>[    4.227318@1] [mmcblk0p02]             reserved  offset 0x000002400000, size 0x000004000000
<4>[    4.227788@2] wifi_request_32k_clk : no 32k pin
<6>[    4.227788@2] aml_aes aml_aes: Aml AES
<6>[    4.228152@2] aml_tdes aml_tdes: Aml TDES
<4>[    4.247883@1] [mmcblk0p03]                cache  offset 0x000006c00000, size 0x000020000000
<6>[    4.247948@2] usbcore: registered new interface driver snd-usb-audio
<4>[    4.248197@2] enter rt5616_modinit
<4>[    4.248396@2] == ES8323 == es8323_modinit()
<7>[    4.248713@2] enter aml_i2s_dai_probe
<6>[    4.248717@2] i2s get no clk src setting in dts, use the default mpll 0
<6>[    4.248724@2] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000
<7>[    4.248824@2] enter aml_pcm_dai_probe
<6>[    4.248859@2] [aml-spdif-dai]enter aml_dai_spdif_init
<6>[    4.248863@2] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4
<4>[    4.248864@2] audio_set_958_clk, freq=4,
<4>[    4.248871@2] IEC958 16bit
<4>[    4.248875@2] hdmitx: audio: aout notify rate 48000
<4>[    4.248877@2] hdmitx: audio: aout notify size 16
<4>[    4.248879@2] hdmitx: audio: aout notify format CT_PCM
<4>[    4.248883@2] hdmitx: audio: audio channel num is 1
<4>[    4.248889@2] hdmitx: audio: SPDIF
<4>[    4.248901@2] hdmitx: audio: current VIC: 16
<4>[    4.248902@2] hdmitx: audio: audio sample rate: 3
<4>[    4.248905@2] hdmitx: audio: set audio N para
<4>[    4.248912@2] hdmitx: audio: PCM out to HDMI
<4>[    4.248914@2] hdmitx: audio: i2s_to_spdif_flag:1
<4>[    4.248916@2] hdmitx: audio: Enable audio spdif to HDMI
<4>[    4.248921@2] hdmitx: audio: Audio Type: PCM
<4>[    4.248970@2] hdmitx: audio: set audio param
<6>[    4.249020@2] [aml-spdif-dai]aml_spdif_probe
<4>[    4.249114@2] test codec dummy_codec
<4>[    4.249116@2] test_codec_of_node, node dummy_codec disable
<4>[    4.249118@2] no external codec, using aml default codec
<4>[    4.249194@2] enter spdif_dit_probe
<6>[    4.249195@2] aml_spdif_unmute
<4>[    4.249335@2] codec_name = aml_m8_codec.0
<6>[    4.290107@0] usb 2-1: New USB device found, idVendor=0c45, idProduct=3451
<6>[    4.290113@0] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[    4.290117@0] usb 2-1: Product: Airmouse
<6>[    4.290120@0] usb 2-1: Manufacturer: AliTV Remote V1
<7>[    4.413462@1] enter aml_set_bias_level level: 1
<7>[    4.413475@1] enter aml_set_bias_level level: 1
<7>[    4.413479@1] enter aml_set_bias_level level: 2
<7>[    4.413529@2] enter aml_asoc_init
<6>[    4.413568@2] p_aml_audio->hp_disable=1
<4>[    4.413614@1] [mmcblk0p04]                  env  offset 0x000027400000, size 0x000000800000
<4>[    4.413714@1] [mmcblk0p05]                 logo  offset 0x000028400000, size 0x000002000000
<4>[    4.413815@1] [mmcblk0p06]             recovery  offset 0x00002ac00000, size 0x000002000000
<4>[    4.413915@1] [mmcblk0p07]                 misc  offset 0x00002d400000, size 0x000002000000
<4>[    4.414015@1] [mmcblk0p08]                 boot  offset 0x00002fc00000, size 0x000002000000
<4>[    4.414109@1] [mmcblk0p09]               system  offset 0x000032400000, size 0x000040000000
<4>[    4.414201@1] [mmcblk0p10]                 data  offset 0x000072c00000, size 0x00015f400000
<4>[    4.414222@1] card key: card_blk_probe.
<4>[    4.414226@1] emmc_key_init:428 emmc key lba_start:0x12020,lba_end:0x12220
<4>[    4.414229@1] i=0,register --- emmc_key
<4>[    4.414231@1] emmc key: emmc_key_init:450 ok.
<4>[    4.414252@1] Exit aml_emmc_partition_ops OK.
<6>[    4.415998@1]  mmcblk0boot1: p1
<4>[    4.416022@1] mmcblk0boot1: p1 start 16065 is beyond EOD, truncated
<6>[    4.416824@1]  mmcblk0boot0: p1
<4>[    4.416843@1] mmcblk0boot0: p1 start 16065 is beyond EOD, truncated
<4>[    4.517661@2] falied to get spk event delay time paraments from dts file
<6>[    4.524252@2] spk_event delay_time = 0
<6>[    4.528442@3] input: AliTV Remote V1 Airmouse as /devices/lm0/usb2/2-1/2-1:1.0/input/input1
<4>[    4.531890@2] aml-i2s 0:playback preallocate_dma_buffer: area=ef300000, addr=2f500000, size=524288
<6>[    4.545438@3] hid-generic 0003:0C45:3451.0001: input,hidraw0: USB HID v1.01 Keyboard [AliTV Remote V1 Airmouse] on usb-lm0-1/input0
<4>[    4.545502@2] aml-i2s 1:capture preallocate_dma_buffer: area=ef240000, addr=2f440000, size=65536
<6>[    4.545526@2] aml_snd_m8 aml_m8_sound_card.3:  AML-M8 <-> aml-i2s-dai.0 mapping ok
<7>[    4.545608@1] enter aml_set_bias_level level: 1
<7>[    4.545610@1] enter aml_set_bias_level level: 2
<5>[    4.549496@0] scsi 0:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 4
<5>[    4.550626@0] sd 0:0:0:0: [sda] 31948800 512-byte logical blocks: (16.3 GB/15.2 GiB)
<5>[    4.551302@0] sd 0:0:0:0: [sda] Write Protect is off
<7>[    4.551308@0] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
<5>[    4.551988@0] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
<6>[    4.556272@0]  sda: sda1
<5>[    4.558379@0] sd 0:0:0:0: [sda] Attached SCSI removable disk
<4>[    4.612356@2] aml-i2s 0:playback preallocate_dma_buffer: area=ef400000, addr=2f600000, size=524288
<6>[    4.614018@0] input: AliTV Remote V1 Airmouse as /devices/lm0/usb2/2-1/2-1:1.1/input/input2
<6>[    4.614263@0] hid-generic 0003:0C45:3451.0002: input,hidraw1: USB HID v1.01 Mouse [AliTV Remote V1 Airmouse] on usb-lm0-1/input1
<6>[    4.616863@0] hid-generic 0003:0C45:3451.0003: hiddev0,hidraw2: USB HID v1.10 Device [AliTV Remote V1 Airmouse] on usb-lm0-1/input2
<6>[    4.620794@0] input: AliTV Remote V1 Airmouse as /devices/lm0/usb2/2-1/2-1:1.3/input/input3
<6>[    4.620967@0] hid-generic 0003:0C45:3451.0004: input,hidraw3: USB HID v1.01 Gamepad [AliTV Remote V1 Airmouse] on usb-lm0-1/input3
<4>[    4.671849@2] aml-i2s 1:capture preallocate_dma_buffer: area=ef260000, addr=2f460000, size=65536
<6>[    4.680208@2] aml_snd_m8 aml_m8_sound_card.3:  dit-hifi <-> aml-spdif-dai.0 mapping ok
<7>[    4.688118@1] enter aml_set_bias_level level: 1
<7>[    4.688125@1] enter aml_set_bias_level level: 2
<7>[    4.688186@1] enter aml_set_bias_level level: 1
<7>[    4.688191@1] enter aml_set_bias_level level: 2
<7>[    4.688694@1] enter aml_set_bias_level level: 1
<7>[    4.688700@1] enter aml_set_bias_level level: 2
<4>[    4.688786@2] -----ext_codec=0---
<4>[    4.691315@2] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0
<6>[    4.697385@2] GACT probability NOT on
<6>[    4.700894@2] Mirror/redirect action on
<6>[    4.704671@2] u32 classifier
<6>[    4.707515@2]     Actions configured
<6>[    4.711063@2] Netfilter messages via NETLINK v0.30.
<6>[    4.715925@2] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>[    4.722503@2] ctnetlink v0.93: registering with nfnetlink.
<6>[    4.727583@2] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[    4.734610@2] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[    4.740851@2] xt_time: kernel timezone is -0000
<6>[    4.745130@2] ipip: IPv4 over IPv4 tunneling driver
<6>[    4.750299@2] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    4.755410@2] arp_tables: (C) 2002 David S. Miller
<6>[    4.760084@2] TCP: cubic registered
<6>[    4.763492@2] Initializing XFRM netlink socket
<6>[    4.768237@2] NET: Registered protocol family 10
<6>[    4.773029@2] mip6: Mobile IPv6
<6>[    4.775585@2] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    4.781239@2] sit: IPv6 over IPv4 tunneling driver
<6>[    4.786492@2] NET: Registered protocol family 17
<6>[    4.790434@2] NET: Registered protocol family 15
<5>[    4.795021@2] Bridge firewalling registered
<6>[    4.799238@2] Bluetooth: RFCOMM TTY layer initialized
<6>[    4.804131@2] Bluetooth: RFCOMM socket layer initialized
<6>[    4.809393@2] Bluetooth: RFCOMM ver 1.11
<6>[    4.813259@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    4.818702@2] Bluetooth: BNEP filters: protocol multicast
<6>[    4.824045@2] Bluetooth: BNEP socket layer initialized
<6>[    4.829138@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    4.835170@2] Bluetooth: HIDP socket layer initialized
<6>[    4.840278@2] l2tp_core: L2TP core driver, V2.0
<6>[    4.844746@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0
<6>[    4.849665@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
<6>[    4.855362@2] l2tp_netlink: L2TP netlink interface
<6>[    4.860122@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
<6>[    4.866143@2] l2tp_debugfs: L2TP debugfs support
<6>[    4.870713@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
<6>[    4.877283@2] NET: Registered protocol family 35
<6>[    4.882664@2] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<5>[    4.889616@2] Registering SWP/SWPB emulation handler
<4>[    4.894507@2] enter meson_pm_init
<6>[    4.897920@2] enter meson_pm_probe!
<6>[    4.901238@2] meson_pm_probe done !
<6>[    4.905243@2] file system registered
<6>[    4.908915@2] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[    4.915207@2] android_usb gadget: Number of LUNs=2
<6>[    4.919963@2]  lun0: LUN: removable file: (no medium)
<6>[    4.924952@2]  lun1: LUN: removable file: (no medium)
<6>[    4.930129@2] android_usb gadget: android_usb ready
<6>[    4.935197@2] aml_rtc rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
<6>[    4.942149@2] ### dt-test ### No testcase data in device tree; not running tests
<4>[    4.949545@2] meson_cpufreq: no voltage_control prop
<4>[    4.954364@2] voltage_control = 0
<4>[    4.958029@2] <<-GTP-INFO->> GTP driver installing...
<4>[    4.962717@2] hdmitx: cec: CEC init
<6>[    4.966258@2] input: cec_input as /devices/virtual/input/input4
<4>[    4.977400@2] hdmitx: cec: CEC task process
<4>[    4.972040@2] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
<6>[    4.981570@2] ALSA device list:
<6>[    4.984809@2]   #0: AML-M8AUDIO
<7>[    4.988001@2] config uart_ao_ttyS0:: Character length 8bits/char
<6>[    5.007613@2] Changing uart_ao_ttyS0: baud from 0 to 115200
<6>[    5.027790@2] Freeing unused kernel memory: 372K (c0b6f000 - c0bcc000)
<7>[    5.050324@3] SELinux: 2048 avtab hash slots, 4781 rules.
<7>[    5.051523@3] SELinux: 2048 avtab hash slots, 4781 rules.
<7>[    5.051541@3] SELinux:  1 users, 2 roles, 407 types, 0 bools, 1 sens, 1024 cats
<7>[    5.051548@3] SELinux:  86 classes, 4781 rules
<7>[    5.052364@3] SELinux:  Completing initialization.
<7>[    5.052370@3] SELinux:  Setting up existing superblocks.
<7>[    5.052387@3] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<7>[    5.052399@3] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>[    5.052439@3] SELinux: initialized (dev bdev, type bdev), not configured for labeling
<7>[    5.052450@3] SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>[    5.052465@3] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    5.052479@3] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
<7>[    5.052724@3] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>[    5.055619@3] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>[    5.055631@3] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>[    5.055639@3] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
<7>[    5.055648@3] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>[    5.055664@3] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>[    5.055721@3] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    5.055742@3] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>[    5.260996@3] type=1403 audit(0.820:2): policy loaded auid=4294967295 ses=4294967295
<14>[    5.288593@3] init: command 'loglevel 7' action=early-init status=0 (init.amlogic.board.rc:4)
<4>[    5.294590@3] aml_nftl_dev: module license 'Proprietary' taints kernel.
<4>[    5.298036@3] Disabling lock debugging due to kernel taint
<4>[    5.304257@3] boot_device_flag : -1
<14>[    5.307103@3] init: command 'insmod /boot/aml_nftl_dev.ko' action=early-init status=0 (init.amlogic.board.rc:5)
<4>[    5.322110@3] gpu cooling register okay with err=0
<4>[    5.322185@3] gpu core cooling register okay with err=0
<4>[    5.326879@3] Mali: Mali device driver loaded
<14>[    5.331258@3] init: command 'insmod /boot/mali.ko mali_debug_level=2 mali_shared_mem_size=0x40000000' action=early-init status=0 (init.amlogic.board.rc:9)
<14>[    5.344908@3] init: processing action 0xb64b6700 (wait_for_coldboot_done)
<14>[    5.351601@3] init: wait for /dev/.coldboot_done
<14>[    5.386409@3] init: command 'wait_for_coldboot_done' action=wait_for_coldboot_done status=0 ((null):0)
<14>[    5.390079@3] init: processing action 0xb64b6730 (mix_hwrng_into_linux_rng)
<14>[    5.397094@3] init: Mixed 512 bytes from /dev/hw_random into /dev/urandominit: command 'mix_hwrng_into_linux_rng' action=mix_hwrng_into_linux_rng status=0 ((null):0)
<14>[    5.411636@3] init: processing action 0xb64b6760 (keychord_init)
<14>[    5.417575@3] init: command 'keychord_init' action=keychord_init status=0 ((null):0)
<14>[    5.425258@3] init: processing action 0xb64b6790 (console_init)
<7>[    5.431188@3] config uart_ao_ttyS0:: Character length 8bits/char
<14>[    5.431252@3] init: command 'console_init' action=console_init status=0 ((null):0)
<14>[    5.433093@3] init: processing action 0xb6443100 (init)
<14>[    5.438291@3] init: command 'sysclktz 0' action=init status=0 (/init.rc:33)
<7>[    5.445545@3] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>[    5.445853@3] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    5.447124@3] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    5.447283@3] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    5.448447@3] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>[    5.449463@3] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
<11>[    5.450892@3] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
<11>[    5.453412@3] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
<11>[    5.463269@3] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
<11>[    5.471361@3] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
<4>[    5.482701@0] force enable DISCARD here for ext4 fs
<4>[    5.490654@0] checked enable EXT4 DISCARD here
<4>[    5.490685@0] EXT4-fs (mmcblk0p9): mounting with "discard" option, but the device does not support discard
<6>[    5.500056@0] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
<7>[    5.508232@0] SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
<14>[    5.508310@0] fs_mgr: __mount(source=/dev/block/system,target=/system,type=ext4)=0
<4>[    5.516197@0] force enable DISCARD here for ext4 fs
<4>[    5.520552@0] EXT4-fs (mmcblk0p10): Ignoring removed nomblk_io_submit option
<6>[    6.123701@0] EXT4-fs (mmcblk0p10): recovery complete
<4>[    6.124253@0] checked enable EXT4 DISCARD here
<4>[    6.127527@0] EXT4-fs (mmcblk0p10): mounting with "discard" option, but the device does not support discard
<6>[    6.137231@0] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[    6.147920@0] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
<14>[    6.148004@0] fs_mgr: check_fs(): mount(/dev/block/data,/data,ext4)=0
<14>[    6.163566@0] fs_mgr: Running /system/bin/e2fsck on /dev/block/data
<14>[    6.216700@0] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<14>[    6.216770@0] e2fsck: /dev/block/data: clean, 18883/359744 files, 589050/1438720 blocks
<4>[    6.224344@0] force enable DISCARD here for ext4 fs
<4>[    6.228580@0] EXT4-fs (mmcblk0p10): Ignoring removed nomblk_io_submit option
<4>[    6.240487@0] checked enable EXT4 DISCARD here
<4>[    6.240515@0] EXT4-fs (mmcblk0p10): mounting with "discard" option, but the device does not support discard
<6>[    6.249668@0] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
<7>[    6.259886@0] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
<14>[    6.259947@0] fs_mgr: __mount(source=/dev/block/data,target=/data,type=ext4)=0
<4>[    6.267505@0] force enable DISCARD here for ext4 fs
<4>[    6.271877@0] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
<6>[    6.289189@0] EXT4-fs (mmcblk0p3): recovery complete
<4>[    6.289729@0] checked enable EXT4 DISCARD here
<4>[    6.292922@0] EXT4-fs (mmcblk0p3): mounting with "discard" option, but the device does not support discard
<6>[    6.302541@0] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[    6.313131@0] SELinux: initialized (dev mmcblk0p3, type ext4), uses xattr
<14>[    6.313181@0] fs_mgr: check_fs(): mount(/dev/block/cache,/cache,ext4)=0
<14>[    6.320630@0] fs_mgr: Running /system/bin/e2fsck on /dev/block/cache
<14>[    6.335023@0] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<14>[    6.335076@0] e2fsck: /dev/block/cache: clean, 27/32768 files, 7632/131072 blocks
<4>[    6.342121@0] force enable DISCARD here for ext4 fs
<4>[    6.346352@0] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
<4>[    6.358014@0] checked enable EXT4 DISCARD here
<4>[    6.358043@0] EXT4-fs (mmcblk0p3): mounting with "discard" option, but the device does not support discard
<6>[    6.367228@0] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
<7>[    6.377430@0] SELinux: initialized (dev mmcblk0p3, type ext4), uses xattr
<14>[    6.377476@0] fs_mgr: __mount(source=/dev/block/cache,target=/cache,type=ext4)=0
<7>[    6.385718@3] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
<7>[    6.386182@3] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
<7>[    6.448220@1] config uart_ao_ttyS0:: Character length 8bits/char
<6>[    6.449539@2] binder: 126:126 transaction failed 29189, size 0-0
<4>[    6.473716@3] buf[0]=f3,buf[1]=af,err=4
<4>[    6.473757@3] M8M2:adc=383,TS_C=19,flag=1
<4>[    6.475890@3] efuse_flag=a
<4>[    6.478845@3] amlogic_thermal_probe, this chip is trimmed, use thermal
<6>[    6.485041@3] amlogic-thermal aml_thermal: amlogic thermal probe start
<4>[    6.491552@3] #thermal-cells=7
<4>[    6.494523@3] keep_mode is disabled
<4>[    6.497998@3] pdata->temp_trip_count=4
<4>[    6.501690@3] temperature=70 on trip point=0
<4>[    6.505912@3] fixing high_freq=1608001 to 1608000 at trip point 0,level=2
<4>[    6.512636@3] fixing low_freq=1608001 to 1608000 at trip point 0,level=2
<4>[    6.519292@3] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
<4>[    6.525661@3] cpu[0] core num==3
<4>[    6.528952@3] gpu[0] core num==5
<4>[    6.532044@3] temperature=80 on trip point=1
<4>[    6.536267@3] fixing high_freq=1200001 to 1200000 at trip point 1,level=6
<4>[    6.542992@3] fixing low_freq=1200001 to 1200000 at trip point 1,level=6
<4>[    6.549653@3] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435
<4>[    6.556018@3] cpu[1] core num==2
<4>[    6.559222@3] gpu[1] core num==4
<4>[    6.562403@3] temperature=90 on trip point=2
<4>[    6.566632@3] fixing high_freq=800001 to 696000 at trip point 2,level=11
<4>[    6.573272@3] fixing low_freq=800001 to 696000 at trip point 2,level=11
<4>[    6.579848@3] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
<38>[    6.584871@0] logd.auditd: start
<4>[    6.589416@3] cpu[2] core num==2
<4>[    6.592590@3] gpu[2] core num==3
<4>[    6.595783@3] temperature=110 on trip point=3
<4>[    6.600108@3] fixing high_freq=-1 to -22 at trip point 3,level=-1
<4>[    6.606133@3] fixing low_freq=-1 to -22 at trip point 3,level=-1
<4>[    6.612087@3] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1
<4>[    6.627646@3] cpu[3] core num==-1
<4>[    6.627684@3] gpu[3] core num==-1
<4>[    6.628618@3] idle interval=1000
<4>[    6.631809@3] pdata->name:aml_thermal, pdata:ec96c400
<4>[    6.636810@3] amlogic_thermal_init_from_dts, 998
<4>[    6.644716@3] amlogic_thermal_initialize, 1014, pdata:ec96c400
<4>[    6.648419@3] tmp_trip[0].cpu_core_upper=1
<4>[    6.651747@3] tmp_trip[1].cpu_core_upper=2
<4>[    6.655797@3] tmp_trip[2].cpu_core_upper=2
<4>[    6.659875@3] tmp_trip[3].cpu_core_upper=-1
<6>[    6.663998@3] aml_thermal bind thermal-cpucore-0 okay !
<6>[    6.669200@3] aml_thermal bind thermal-cpufreq-0 okay !
<4>[    6.674335@3] tmp_trip[0].gpu_core_upper=1
<4>[    6.678596@3] tmp_trip[1].gpu_core_upper=2
<4>[    6.682447@3] tmp_trip[2].gpu_core_upper=3
<4>[    6.686493@3] tmp_trip[3].gpu_core_upper=-1
<6>[    6.690659@3] aml_thermal bind thermal-gpucore-0 okay !
<4>[    6.695809@3] pdata->tmp_trip[0].gpu_lower_level=1
<4>[    6.700562@3] pdata->tmp_trip[0].gpu_upper_level=1
<4>[    6.705300@3] pdata->tmp_trip[1].gpu_lower_level=2
<4>[    6.710042@3] pdata->tmp_trip[1].gpu_upper_level=2
<4>[    6.714828@3] pdata->tmp_trip[2].gpu_lower_level=3
<4>[    6.719551@3] pdata->tmp_trip[2].gpu_upper_level=3
<4>[    6.724282@3] pdata->tmp_trip[3].gpu_lower_level=-1
<4>[    6.729220@3] pdata->tmp_trip[3].gpu_upper_level=-1
<6>[    6.733949@3] aml_thermal bind thermal-gpufreq-0 okay !
<6>[    6.739254@3] amlogic: Kernel Thermal management registered
<6>[    6.744626@3] amlogic-thermal aml_thermal: amlogic thermal probe done
<4>[    6.752405@3] video first pts = 0
<7>[    6.754723@3] enter:aml_m8_codec_mute_stream, mute=1, stream=1
<4>[    6.754736@3] IEC958 16bit
<4>[    6.756976@3] hdmitx: audio: aout notify rate 48000
<4>[    6.761814@3] hdmitx: audio: aout notify size 16
<4>[    6.766363@3] hdmitx: audio: no update
<4>[    6.770098@3] aml_i2s_close device type 4
<7>[    6.774195@3] enter aml_set_bias_level level: 1
<7>[    6.774202@3] enter aml_set_bias_level level: 2
<7>[    6.774367@3] enter:aml_m8_codec_mute_stream, mute=1, stream=0
<4>[    6.774377@3] IEC958 16bit
<4>[    6.776796@3] hdmitx: audio: aout notify rate 48000
<4>[    6.781638@3] hdmitx: audio: aout notify size 16
<4>[    6.786192@3] hdmitx: audio: no update
<4>[    6.789913@3] aml_i2s_close device type 8
<4>[    6.794642@3] aml_i2s_close device type 1
<7>[    6.798105@3] enter aml_set_bias_level level: 1
<7>[    6.798110@3] enter aml_set_bias_level level: 2
<4>[    6.798985@3] IEC958 16bit
<4>[    6.800690@3] hdmitx: audio: aout notify rate 48000
<4>[    6.805517@3] hdmitx: audio: aout notify size 16
<4>[    6.810109@3] hdmitx: audio: no update
<4>[    6.813802@3] aml_i2s_close device type 2
<4>[    6.820347@3] name=emmc_key nand_key
<4>[    6.821384@3] device name=nand_key open error
<3>[    6.825783@3] aml_keys: version 0 can not be init c0c25d04
<4>[    6.831242@3] name=emmc_key emmc_key
<4>[    6.940160@3] emmc read lba=0x12020, blocks=0x100 OK!
<4>[    6.940492@3] register_aes_algorithm:488,new way
<4>[    6.945642@3] vfm_map_store:rm default
<4>[    6.947940@3] vfm_map_store:add default decoder ppmgr deinterlace amvideo
<7>[    6.952055@2] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
<11>[    6.954759@3] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
<11>[    6.964300@3] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
<11>[    6.976738@3] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'
<11>[    6.986551@3] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'
<11>[    7.006255@3] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
<11>[    7.006263@3] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
<11>[    7.006273@3] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'
<11>[    7.006278@3] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'
<11>[    7.008263@3] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
<11>[    7.008285@3] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
<11>[    7.010665@3] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
<11>[    7.011710@3] init: Warning!  Service low_mem needs a SELinux domain defined; please fix!
<11>[    7.014434@3] init: Warning!  Service suroot needs a SELinux domain defined; please fix!
<3>[    7.015440@3] android_usb: already disabled
<6>[    7.015669@3] mtp_bind_config
<4>[    7.015805@3] WARN::ep_dequeue:413: bogus device state
<4>[    7.015805@3]
<6>[    7.015969@3] mtp_bind_config
<4>[    7.018917@0] WARN::dwc_otg_handle_mode_mismatch_intr:167: Mode Mismatch Interrupt: currently in Host mode
<4>[    7.018917@0]
<11>[    7.290118@2] dig: data_integrity_guard main!
<36>[    7.336652@0] type=1400 audit(2.890:3): avc: denied { execute_no_trans } for pid=182 comm="sudo.sh" path="/system/xbin/su" dev="mmcblk0p9" ino=1679 scontext=u:r:init:s0 tcontext=u:object_r:su_exec:s0 tclass=file
<4>[    7.350942@2] cur_mode = 0
<4>[    7.352382@2] [0x0] = 0x1dd0190
<4>[    7.355484@2] [0x4] = 0xf800ca
<4>[    7.358566@2] [0x8] = 0x82006e
<4>[    7.361536@2] [0xc] = 0x3c0030
<6>[    7.362493@1] warning: `su' uses 32-bit capabilities (legacy support in use)
<4>[    7.382414@0] [0x10] = 0x30fa0013
<4>[    7.382453@0] [0x18] = 0x6f19000
<4>[    7.383334@0] [0x1c] = 0x9f40
<4>[    7.386269@0] [0x20] = 0x0
<4>[    7.396101@2] [0x24] = 0x0
<4>[    7.396131@2] [0x28] = 0x0
<4>[    7.396152@2] set_remote_mode[69]
<6>[    7.398990@3] Adding 511996k swap on /dev/block/zram0.  Priority:-1 extents:1 across:511996k SS
<4>[    7.417934@0] tvmode set to 1080p
<4>[    7.417981@0] don't set the same mode as current.
<36>[    7.432175@0] type=1400 audit(2.990:4): avc: denied { read write } for pid=172 comm="systemcontrol" name="axis" dev="sysfs" ino=8827 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs_xbmc:s0 tclass=file
<36>[    7.432327@0] type=1400 audit(2.990:5): avc: denied { open } for pid=172 comm="systemcontrol" path="/sys/class/video/axis" dev="sysfs" ino=8827 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs_xbmc:s0 tclass=file
<11>[    7.462677@2] healthd: No charger supplies found
<12>[    7.462684@2] healthd: No battery devices found
<6>[    7.495345@0] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
<7>[    7.495567@0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<4>[    7.548280@2] buf=2
<4>[    7.548284@2] IEC958_mode_raw=2
<4>[    7.548441@2] osd0=>x:38 ,y:21,w:1920,h:1080
<4>[    7.548441@2]  osd1=> x:38,y:21,w:18,h:18
<4>[    7.581728@2] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE
<4>[    7.582109@2] osd[1].scaledata: 1920 1844 1080 1038
<4>[    7.587008@2] osd[1].pandata: 0 0 0 0
<7>[    8.847646@3] -----hotplug:2
<4>[    8.958014@2] IRQ94 no longer affine to CPU2
<5>[    8.958259@1] CPU2: shutdown
<4>[    9.078087@3] IRQ95 no longer affine to CPU3
<5>[    9.078389@1] CPU3: shutdown
<7>[    9.190893@1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<4>[    9.532587@0] force enable DISCARD here for ext4 fs
<4>[    9.534113@0] checked enable EXT4 DISCARD here
<4>[    9.537268@0] EXT4-fs (zram0): mounting with "discard" option, but the device does not support discard
<6>[    9.546187@1] EXT4-fs (zram0): mounted filesystem with ordered data mode. Opts: (null)
<7>[    9.553359@1] SELinux: initialized (dev zram0, type ext4), uses xattr
<4>[   11.247785@1] write pen_release: 2
<4>[   11.247995@2] CPU2: Booted secondary processor
<7>[   11.797702@0] enter aml_set_bias_level level: 1
<7>[   11.797712@0] enter aml_set_bias_level level: 2
<7>[   11.827755@1] enter aml_set_bias_level level: 1
<7>[   11.827758@1] enter aml_set_bias_level level: 2
<7>[   11.947667@0] -----hotplug:2
<6>[   11.979888@2] request_suspend_state: wakeup (3->0) at 11762274000 (1970-01-01 00:00:07.544687000 UTC)
<4>[   11.983452@2] request_suspend_state,169,old_sleep=0,new_state=0
<4>[   11.999331@2] IRQ94 no longer affine to CPU2
<5>[   11.999553@1] CPU2: shutdown
<4>[   12.953654@0] vout [tv_set_vframe_rate_end_hint] return mode = 15, policy = 1!
<4>[   12.955895@0] vout [framerate_automation_set_mode] mode_target = 15
<4>[   12.962114@0] +++++++++++++++++framerate_automation_set_mode[1128]auto_mode=0++++++++++++++++
<6>[   24.954291@0] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
<6>[   24.956008@0] lowmemorykiller: oom_adj 0 => oom_score_adj 0
<6>[   24.961587@0] lowmemorykiller: oom_adj 1 => oom_score_adj 58
<6>[   24.967159@1] lowmemorykiller: oom_adj 2 => oom_score_adj 117
<6>[   24.972806@1] lowmemorykiller: oom_adj 3 => oom_score_adj 176
<6>[   24.978512@1] lowmemorykiller: oom_adj 9 => oom_score_adj 529
<6>[   24.978514@1] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
<6>[   25.452774@0] acc_open
<6>[   25.452810@0] acc_release
<4>[   25.642649@0] eth0: device MAC address c4:2f:ac:76:33:03
<4>[   25.655846@0] mask interrupts MMC
<4>[   25.655874@0] mask interrupts MMC
<4>[   25.656824@0] mask interrupts MMC
<4>[   25.660149@0] stmmac_open: failed PTP initialisation
<4>[   26.347805@1] write pen_release: 2
<4>[   26.348023@2] CPU2: Booted secondary processor
<4>[   26.405389@1] avc open
<4>[   26.409873@0] amvenc_avc  check CMA pool sucess, max instance: 1.
<4>[   26.411604@0] amvenc_avc_open: allocating phys 2dc00000, size 18432k, wq:ec96d600.
<4>[   26.418426@0] amvenc_avc  memory config sucess, buff start:0x2dc00000, size is 0x1200000, wq:ec96d600.
<4>[   26.427738@0] avc release, wq:ec96d600
<4>[   26.431111@0] remove  encode_work_queue ec96d600 sucess, destroy_encode_work_queue line 2408.
<4>[   26.437496@0] ionvideo open
<4>[   26.437511@0] ionvideo_stop_generating!!!!
<4>[   26.437520@0] ionvideo release
<4>[   26.448412@0] ionvideo open
<4>[   26.448421@0] ionvideo_stop_generating!!!!
<4>[   26.448430@0] ionvideo release
<4>[   26.452542@0] ionvideo open
<4>[   26.452553@0] ionvideo_stop_generating!!!!
<4>[   26.452562@0] ionvideo release
<4>[   26.455614@0] ionvideo open
<4>[   26.455623@0] ionvideo_stop_generating!!!!
<4>[   26.455677@0] ionvideo release
<4>[   26.458533@0] ionvideo open
<4>[   26.458542@0] ionvideo_stop_generating!!!!
<4>[   26.458550@0] ionvideo release
<4>[   26.460881@0] ionvideo open
<4>[   26.460891@0] ionvideo_stop_generating!!!!
<4>[   26.460900@0] ionvideo release
<4>[   26.464395@0] ionvideo open
<4>[   26.464403@0] ionvideo_stop_generating!!!!
<4>[   26.464412@0] ionvideo release
<4>[   26.467151@0] ionvideo open
<4>[   26.467159@0] ionvideo_stop_generating!!!!
<4>[   26.467170@0] ionvideo release
<4>[   26.626324@0] Digital output mode: 2 - RAW w/  over clock
<4>[   26.627906@0] Digital output mode: 2 - RAW w/  over clock
<4>[   26.647866@0] Digital output mode: 2 - RAW w/  over clock
<4>[   27.147783@1] write pen_release: 3
<4>[   27.148069@3] CPU3: Booted secondary processor
<4>[   28.203951@1] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<7>[   28.208134@1] SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
<7>[   28.547630@1] -----hotplug:2
<4>[   28.690369@2] IRQ94 no longer affine to CPU2
<5>[   28.690669@1] CPU2: shutdown
<4>[   28.808658@3] IRQ95 no longer affine to CPU3
<5>[   28.808891@1] CPU3: shutdown
<7>[   28.809888@1] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
<6>[   29.106061@0] libphy: stmmac-0:01 - Link is Up - 1000/Full
<4>[   29.847882@1] write pen_release: 2
<4>[   29.848093@2] CPU2: Booted secondary processor
<4>[   31.547971@1] write pen_release: 3
<4>[   31.548277@3] CPU3: Booted secondary processor
<11>[   32.270855@3] init: Warning!  Service preinstall needs a SELinux domain defined; please fix!
<11>[   33.309823@0] dig: data_integrity_guard isBootCompleted:1!
<11>[   33.310806@0] dig: dig set_data_ro_count count:0!
<36>[   33.865622@0] type=1400 audit(1476754734.777:6): avc: denied { getattr } for pid=158 comm="sdcard" path="/data/media/0/TWRP" dev="mmcblk0p10" ino=286326 scontext=u:r:sdcardd:s0 tcontext=u:object_r:unlabeled:s0 tclass=dir
<7>[   34.347628@1] -----hotplug:2
<4>[   34.438092@2] IRQ94 no longer affine to CPU2
<5>[   34.438357@1] CPU2: shutdown
<4>[   34.578672@3] IRQ95 no longer affine to CPU3
<5>[   34.578934@1] CPU3: shutdown
<4>[   34.847953@1] write pen_release: 2
<4>[   34.848171@2] CPU2: Booted secondary processor
<4>[   36.747983@1] write pen_release: 3
<4>[   36.748289@3] CPU3: Booted secondary processor
<11>[   40.589634@0] init: untracked pid 1184 killed by signal 9
<7>[   46.747662@2] -----hotplug:2
<4>[   46.798144@2] IRQ94 no longer affine to CPU2
<5>[   46.798419@1] CPU2: shutdown
<4>[   46.928292@3] IRQ95 no longer affine to CPU3
<5>[   46.928573@1] CPU3: shutdown
<7>[   46.988797@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2
<6>[   46.989030@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2
<4>[   46.991570@0] ----aml_hw_iec958_init,runtime->rate=48000--
<4>[   46.995824@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
<4>[   47.002500@0] iec958 mode PCM16
<4>[   47.005467@0] IEC958 16bit
<4>[   47.008274@0] hdmitx: audio: aout notify rate 48000
<4>[   47.012980@0] hdmitx: audio: aout notify size 16
<4>[   47.017561@0] hdmitx: audio: no update
<6>[   47.021416@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000
<7>[   47.027374@1] enter aml_set_bias_level level: 2
<7>[   47.027390@1] enter aml_set_bias_level level: 2
<7>[   47.027403@1] enter aml_set_bias_level level: 1
<7>[   47.027406@1] enter aml_set_bias_level level: 2
<6>[   47.027423@0] Amlogic <> pd3_env: name Right DAC , event(1)
<6>[   47.033901@0] Amlogic <> pd3_env: name Left DAC , event(1)
<6>[   47.038297@0] Amlogic <> pd3_env: name Right HP OUT PGA , event(1)
<6>[   47.044434@0] Amlogic <> pd3_env: name Left HP OUT PGA , event(1)
<4>[   47.050433@0] speaker_events--mute =1
<7>[   47.057665@1] enter aml_set_bias_level level: 3
<7>[   47.057676@1] enter aml_set_bias_level level: 3
<7>[   47.057693@0] enter:aml_m8_codec_mute_stream, mute=0, stream=0
<6>[   47.058166@0] [aml-i2s-dai]aiu i2s playback enable
<6>[   47.058166@0]
<6>[   47.060372@0] [aml-i2s-dai]audio_hw_958_enable  1
<4>[   49.547893@1] write pen_release: 2
<4>[   49.548130@2] CPU2: Booted secondary processor
<4>[   49.847948@1] write pen_release: 3
<4>[   49.848212@3] CPU3: Booted secondary processor
<7>[   50.947671@3] -----hotplug:2
<4>[   50.988125@2] IRQ94 no longer affine to CPU2
<5>[   50.988385@1] CPU2: shutdown
<4>[   51.118356@3] IRQ95 no longer affine to CPU3
<5>[   51.118633@1] CPU3: shutdown
<36>[   51.144519@0] type=1400 audit(1476754752.057:7): avc: denied { read } for pid=158 comm="sdcard" name="TWRP" dev="mmcblk0p10" ino=286326 scontext=u:r:sdcardd:s0 tcontext=u:object_r:unlabeled:s0 tclass=dir
<36>[   51.157807@1] type=1400 audit(1476754752.057:8): avc: denied { open } for pid=158 comm="sdcard" path="/data/media/0/TWRP" dev="mmcblk0p10" ino=286326 scontext=u:r:sdcardd:s0 tcontext=u:object_r:unlabeled:s0 tclass=dir
<6>[   51.708454@0] [aml-i2s-dai]aiu i2s playback disable
<6>[   51.708454@0]
<6>[   51.709349@0] [aml-i2s-dai]audio_hw_958_enable  0
<7>[   51.714070@0] enter:aml_m8_codec_mute_stream, mute=1, stream=0
<4>[   51.714081@0] IEC958 16bit
<4>[   51.716743@0] hdmitx: audio: aout notify rate 48000
<4>[   51.721728@0] hdmitx: audio: aout notify size 16
<4>[   51.726119@0] hdmitx: audio: no update
<4>[   51.729907@0] aml_i2s_close device type 8
<7>[   56.737730@0] enter aml_set_bias_level level: 2
<7>[   56.737742@0] enter aml_set_bias_level level: 2
<7>[   56.737749@0] enter aml_set_bias_level level: 1
<7>[   56.737753@0] enter aml_set_bias_level level: 2
<4>[   56.737768@0] speaker_events--mute =0
<6>[   56.737805@0] Amlogic <> pd3_env: name Right HP OUT PGA , event(4)
<6>[   56.741970@0] Amlogic <> pd3_env: name Left HP OUT PGA , event(4)
<6>[   56.748081@0] Amlogic <> pd3_env: name Right DAC , event(4)
<6>[   56.753607@0] Amlogic <> pd3_env: name Left DAC , event(4)
<6>[   56.758967@0] Amlogic <> pd3_env: name Right DAC , event(8)
<6>[   56.764468@0] Amlogic <> pd3_env: name Left DAC , event(8)
<7>[   56.770037@0] enter aml_set_bias_level level: 1
<7>[   56.770048@0] enter aml_set_bias_level level: 1
<4>[   66.299406@1] IRQ93 no longer affine to CPU1
<5>[   66.299660@0] CPU1: shutdown
<4>[   68.047876@0] write pen_release: 1
<4>[   68.048082@1] CPU1: Booted secondary processor
<4>[   70.309456@1] IRQ93 no longer affine to CPU1
<5>[   70.309703@0] CPU1: shutdown
<7>[  138.192604@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2
<6>[  138.192859@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2
<4>[  138.194123@0] ----aml_hw_iec958_init,runtime->rate=48000--
<4>[  138.199656@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
<4>[  138.206282@0] iec958 mode PCM16
<4>[  138.209315@0] IEC958 16bit
<4>[  138.211969@0] hdmitx: audio: aout notify rate 48000
<4>[  138.216811@0] hdmitx: audio: aout notify size 16
<4>[  138.222233@0] hdmitx: audio: no update
<6>[  138.225096@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000
<7>[  138.231642@0] enter aml_set_bias_level level: 2
<7>[  138.231658@0] enter aml_set_bias_level level: 2
<7>[  138.231673@0] enter aml_set_bias_level level: 1
<7>[  138.231680@0] enter aml_set_bias_level level: 2
<6>[  138.231704@0] Amlogic <> pd3_env: name Right DAC , event(1)
<6>[  138.236745@0] Amlogic <> pd3_env: name Left DAC , event(1)
<6>[  138.242146@0] Amlogic <> pd3_env: name Right HP OUT PGA , event(1)
<6>[  138.248254@0] Amlogic <> pd3_env: name Left HP OUT PGA , event(1)
<4>[  138.254237@0] speaker_events--mute =1
<7>[  138.267870@0] enter aml_set_bias_level level: 3
<7>[  138.267885@0] enter aml_set_bias_level level: 3
<7>[  138.268666@0] enter:aml_m8_codec_mute_stream, mute=0, stream=0
<6>[  138.269253@0] [aml-i2s-dai]aiu i2s playback enable
<6>[  138.269253@0]
<6>[  138.270052@0] [aml-i2s-dai]audio_hw_958_enable  1
<4>[  145.958115@0] write pen_release: 1
<4>[  145.958491@1] CPU1: Booted secondary processor
<6>[  149.787918@0] [aml-i2s-dai]aiu i2s playback disable
<6>[  149.787918@0]
<6>[  149.788848@0] [aml-i2s-dai]audio_hw_958_enable  0
<7>[  149.793665@0] enter:aml_m8_codec_mute_stream, mute=1, stream=0
<4>[  149.793703@0] IEC958 16bit
<4>[  149.796253@0] hdmitx: audio: aout notify rate 48000
<4>[  149.801512@0] hdmitx: audio: aout notify size 16
<4>[  149.805675@0] hdmitx: audio: no update
<4>[  149.809467@0] aml_i2s_close device type 8
<4>[  150.109549@1] IRQ93 no longer affine to CPU1
<5>[  150.109792@0] CPU1: shutdown
<7>[  154.828626@0] enter aml_set_bias_level level: 2
<7>[  154.828748@0] enter aml_set_bias_level level: 2
<7>[  154.828837@0] enter aml_set_bias_level level: 1
<7>[  154.828891@0] enter aml_set_bias_level level: 2
<4>[  154.829286@0] speaker_events--mute =0
<6>[  154.829572@0] Amlogic <> pd3_env: name Right HP OUT PGA , event(4)
<6>[  154.834318@0] Amlogic <> pd3_env: name Left HP OUT PGA , event(4)
<6>[  154.848403@0] Amlogic <> pd3_env: name Right DAC , event(4)
<6>[  154.848733@0] Amlogic <> pd3_env: name Left DAC , event(4)
<6>[  154.854037@0] Amlogic <> pd3_env: name Right DAC , event(8)
<6>[  154.898588@0] Amlogic <> pd3_env: name Left DAC , event(8)
<7>[  154.899451@0] enter aml_set_bias_level level: 1
<7>[  154.899710@0] enter aml_set_bias_level level: 1
<4>[  162.497773@0] write pen_release: 1
<4>[  162.497976@1] CPU1: Booted secondary processor
<4>[  163.048030@0] write pen_release: 2
<4>[  163.048288@2] CPU2: Booted secondary processor
<7>[  163.947652@2] -----hotplug:2
<4>[  164.017985@1] IRQ93 no longer affine to CPU1
<5>[  164.018258@0] CPU1: shutdown
<36>[  164.741937@0] type=1400 audit(1476754865.657:9): avc: denied { read } for pid=2021 comm="Binder_1" name="/" dev="tmpfs" ino=5121 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=dir
<36>[  164.757807@2] type=1400 audit(1476754865.677:10): avc: denied { open } for pid=2021 comm="Binder_1" path="/dev" dev="tmpfs" ino=5121 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=dir
<4>[  165.909446@2] IRQ94 no longer affine to CPU2
<5>[  165.909693@0] CPU2: shutdown
<36>[  189.554300@0] type=1400 audit(1476754890.467:11): avc: denied { syslog_read } for pid=2047 comm="dmesg" scontext=u:r:untrusted_app:s0 tcontext=u:r:kernel:s0 tclass=system
<4>[  194.475722@0] Disconnect cb-Host
<6>[  194.528699@0] usb 1-1: USB disconnect, device number 2
<6>[  194.548551@0] sd 0:0:0:0: [sda] Unhandled error code
<6>[  194.548881@0] sd 0:0:0:0: [sda]
<4>[  194.551399@0] Result: hostbyte=0x01 driverbyte=0x00
<6>[  194.556256@0] sd 0:0:0:0: [sda] CDB:
<4>[  194.560000@0] cdb[0]=0x2a: 2a 00 00 00 0f a6 00 00 01 00
<3>[  194.565044@0] end_request: I/O error, dev sda, sector 4006
<3>[  194.570682@0] Buffer I/O error on device sda1, logical block 2494
<4>[  194.576636@0] lost page write due to I/O error on sda1
<6>[  194.582425@0] sd 0:0:0:0: [sda] Unhandled error code
<6>[  194.586625@0] sd 0:0:0:0: [sda]
<4>[  194.590018@0] Result: hostbyte=0x01 driverbyte=0x00
<6>[  194.594768@0] sd 0:0:0:0: [sda] CDB:
<4>[  194.598530@0] cdb[0]=0x2a: 2a 00 00 1c 7b c8 00 00 a2 00
<3>[  194.603446@0] end_request: I/O error, dev sda, sector 1866696
<4>[  195.007859@0] write pen_release: 1
<4>[  195.008085@1] CPU1: Booted secondary processor
<4>[  196.509468@1] IRQ93 no longer affine to CPU1
<5>[  196.509707@0] CPU1: shutdown
<6>[  209.462041@0] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
<36>[  329.262220@0] type=1400 audit(1476755030.177:12): avc: denied { syslog_read } for pid=2067 comm="dmesg" scontext=u:r:untrusted_app:s0 tcontext=u:r:kernel:s0 tclass=system
<4>[  362.368253@0] Indeed it is in host mode hprt0 = 00021501
<6>[  362.548601@0] usb 1-1: new high-speed USB device number 3 using dwc_otg
<4>[  362.551606@0] Indeed it is in host mode hprt0 = 00001101
<6>[  362.758745@0] usb 1-1: New USB device found, idVendor=058f, idProduct=6387
<6>[  362.760250@0] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[  362.768202@0] usb 1-1: Product: Mass Storage
<6>[  362.771691@0] usb 1-1: Manufacturer: Generic
<6>[  362.776051@0] usb 1-1: SerialNumber: 0A8010B005A1BEE08BFC
<6>[  362.804418@0] usb-storage 1-1:1.0: USB Mass Storage device detected
<6>[  362.809502@0] scsi1 : usb-storage 1-1:1.0
<5>[  363.822267@0] scsi 1:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 4
<5>[  363.850808@0] sd 1:0:0:0: [sda] 31948800 512-byte logical blocks: (16.3 GB/15.2 GiB)
<5>[  363.856861@0] sd 1:0:0:0: [sda] Write Protect is off
<7>[  363.858376@0] sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
<5>[  363.868479@0] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
<6>[  363.904807@0]  sda: sda1
<5>[  363.957338@0] sd 1:0:0:0: [sda] Attached SCSI removable disk
<7>[  365.895793@0] SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
<7>[  366.045800@0] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
<36>[  366.205622@0] type=1400 audit(1476755067.117:13): avc: denied { getattr } for pid=157 comm="sdcard" path="/data/media/0/TWRP" dev="mmcblk0p10" ino=286326 scontext=u:r:sdcardd:s0 tcontext=u:object_r:unlabeled:s0 tclass=dir
<4>[  366.377741@0] write pen_release: 1
<4>[  366.377961@1] CPU1: Booted secondary processor
<36>[  374.046405@0] type=1400 audit(1476755074.957:14): avc: denied { read } for pid=159 comm="sdcard" name="TWRP" dev="mmcblk0p10" ino=286326 scontext=u:r:sdcardd:s0 tcontext=u:object_r:unlabeled:s0 tclass=dir
<36>[  374.059169@0] type=1400 audit(1476755074.957:15): avc: denied { open } for pid=159 comm="sdcard" path="/data/media/0/TWRP" dev="mmcblk0p10" ino=286326 scontext=u:r:sdcardd:s0 tcontext=u:object_r:unlabeled:s0 tclass=dir
<4>[  378.669385@1] IRQ93 no longer affine to CPU1
<5>[  378.669626@0] CPU1: shutdown