Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Format: Log Type - Time(microsec) - Message - Optional Info
- Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
- S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.0-00261
- S - IMAGE_VARIANT_STRING=HAAAANAAA
- S - OEM_IMAGE_VERSION_STRING=C-BPATTH
- S - Boot Config, 0x000002e3
- S - Core 0 Frequency, 0 MHz
- B - 1545 - PBL, Start
- B - 3490 - bootable_media_detect_entry, Start
- B - 179093 - bootable_media_detect_success, Start
- B - 179098 - elf_loader_entry, Start
- B - 181416 - auth_hash_seg_entry, Start
- B - 181626 - auth_hash_seg_exit, Start
- B - 209744 - elf_segs_hash_verify_entry, Start
- B - 268621 - PBL, End
- B - 223138 - SBL1, Start
- B - 274195 - pm_device_init, Start
- D - 14274 - pm_device_init, Delta
- B - 288957 - boot_flash_init, Start
- D - 0 - boot_flash_init, Delta
- B - 292983 - boot_config_data_table_init, Start
- D - 403149 - boot_config_data_table_init, Delta - (0 Bytes)
- B - 700676 - CDT version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
- B - 706898 - sbl1_ddr_set_params, Start
- B - 710589 - cpr_init, Start
- D - 0 - cpr_init, Delta
- B - 716201 - Pre_DDR_clock_init, Start
- D - 183 - Pre_DDR_clock_init, Delta
- D - 0 - sbl1_ddr_set_params, Delta
- B - 728706 - pm_driver_init, Start
- D - 6832 - pm_driver_init, Delta
- B - 744200 - clock_init, Start
- D - 30 - clock_init, Delta
- B - 754356 - Image Load, Start
- D - 35197 - QSEE Image Loaded, Delta - (460664 Bytes)
- B - 789584 - Image Load, Start
- D - 488 - SEC Image Loaded, Delta - (2048 Bytes)
- B - 796812 - sbl1_efs_handle_cookies, Start
- D - 30 - sbl1_efs_handle_cookies, Delta
- B - 804620 - Image Load, Start
- D - 14244 - QHEE Image Loaded, Delta - (51952 Bytes)
- B - 818894 - Image Load, Start
- D - 18209 - RPM Image Loaded, Delta - (149492 Bytes)
- B - 837103 - Image Load, Start
- D - 23393 - APPSBL Image Loaded, Delta - (479072 Bytes)
- B - 860527 - QSEE Execution, Start
- D - 61 - QSEE Execution, Delta
- B - 866200 - SBL1, End
- D - 645441 - SBL1, Delta
- S - Flash Throughput, 54000 KB/s (1143228 Bytes, 20892 us)
- S - DDR Frequency, 400 MHz
- Android Bootloader - UART_DM Initialized!!!
- [0] welcome to lk
- [10] platform_init()
- [10] target_init()
- [20] initialising mmc_slot =2
- [20] Error: Command timeout error
- [20] Failure getting OCR response from MMC Card
- [30] MMC card failed to respond, try for SD card
- [90] Done initialization of the card
- [90] pm8x41_get_is_cold_boot: cold boot
- [90] Not able to search the panel:
- [100] Display not enabled for 24 HW type
- [100] Target panel init not found!
- [100] pm8x41_get_is_cold_boot: cold boot
- [110] partition misc doesn't exist
- [110] error in emmc_recovery_init
- [110] Unable to locate /bootselect partition
- [120] No 'misc' partition found
- [120] Error reading MISC partition
- [120] failed to get ffbm cookie[130] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
- [130] Loading boot image (413696): start
- [150] Loading boot image (413696): done
- [160] DTB Total entry: 15, DTB version: 2
- [160] Using DTB entry 0x000000f7/00000000/0x00010018/0 for device 0x000000f7/00010000/0x00010018/0
- [170] Using pmic info 0x2000b/0x0/0x0/0x0 for device 0x2000b/0x0/0x0/0x0
- [180] cmdline: androidboot.emmc=true androidboot.serialno=dae85161 androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
- [190] Updating device tree: start
- [240] Updating device tree: done
- [340] Error: Command timeout error
- [340] card sleep error: mmc_put_card_to_sleep
- [340] booting linux @ 0x80080000, ramdisk @ 0x82000000 (0), tags/device tree @ 0x81e00000
- [350] Jumping to kernel via monitor
- U-Boot 2016.01-rc1 (Dec 08 2015 - 11:39:05 +0000)
- Qualcomm-DragonBoard 410C
- DRAM: 986 MiB
- MMC: msm_sdhci: 0, msm_sdhci: 1
- reading uboot.env
- In: serial
- Out: serial
- Err: serial
- Net: Net Initialization Skipped
- No ethernet found.
- Hit any key to stop autoboot: 0
- ENVCMD
- reading 96boards-kernel_x1.snap/kernel.img
- 14020096 bytes read in 3783 ms (3.5 MiB/s)
- reading 96boards-kernel_x1.snap/dtbs/apq8016-sbc.dtb
- 70369 bytes read in 41 ms (1.6 MiB/s)
- reading 96boards-kernel_x1.snap/initrd.img
- 4850771 bytes read in 1326 ms (3.5 MiB/s)
- ## Flattened Device Tree blob at 83000000
- Booting using the fdt blob at 0x83000000
- Using Device Tree in place at 0000000083000000, end 00000000830142e0
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 4.4.23-96boards+ (root@VM) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #1 SMP PREEMPT Tu7
- [ 0.000000] Boot CPU: AArch64 Processor [410fd030]
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] Reserved memory: OVERLAP DETECTED!
- [ 0.000000] hypervisor_region@86400000 (0x0000000086400000--0x0000000086800000) overlaps with rmtfs@86700000 (0x0000000086700000--0x0000000)
- [ 0.000000] Reserved memory: OVERLAP DETECTED!
- [ 0.000000] modem_adsp_region@86800000 (0x0000000086800000--0x000000008b000000) overlaps with wcnss@89300000 (0x0000000089300000--0x0000000)
- [ 0.000000] cma: Reserved 64 MiB at 0x00000000b9800000
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv65535.65535 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] PERCPU: Embedded 16 pages/cpu @ffffffc03d93f000 s25112 r8192 d32232 u65536
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM errata 826319, 827319, 824069
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 224532
- [ 0.000000] Kernel command line: androidboot.emmc=true androidboot.serialno=dae85161 androidboot.baseband=apq mdss_mdp.panel=0:dsi:0: consp
- [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
- [ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
- [ 0.000000] log_buf_len min size: 16384 bytes
- [ 0.000000] log_buf_len: 32768 bytes
- [ 0.000000] early log buf free: 13952(85%)
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.000000] software IO TLB [mem 0xb4600000-0xb8600000] (64MB) mapped at [ffffffc034600000-ffffffc0385fffff]
- [ 0.000000] Memory: 743340K/912384K available (8517K kernel code, 807K rwdata, 3696K rodata, 572K init, 274K bss, 103508K reserved, 65536K )
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
- [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
- [ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc0f68000 ( 15 MB actual)
- [ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)
- [ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
- [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
- [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc03da00000 ( 986 MB)
- [ 0.000000] .init : 0xffffffc000c70000 - 0xffffffc000cff000 ( 572 KB)
- [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000c6f414 ( 12222 KB)
- [ 0.000000] .data : 0xffffffc000d15000 - 0xffffffc000ddee00 ( 808 KB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 64.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- [ 0.000432] Console: colour dummy device 80x25
- [ 0.001463] console [tty0] enabled
- [ 0.001492] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
- [ 0.001531] pid_max: default: 32768 minimum: 301
- [ 0.001614] Security Framework initialized
- [ 0.001677] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.001704] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.002279] Initializing cgroup subsys io
- [ 0.002309] Initializing cgroup subsys memory
- [ 0.002349] Initializing cgroup subsys devices
- [ 0.002374] Initializing cgroup subsys freezer
- [ 0.002398] Initializing cgroup subsys net_cls
- [ 0.002425] Initializing cgroup subsys perf_event
- [ 0.002450] Initializing cgroup subsys net_prio
- [ 0.002477] Initializing cgroup subsys hugetlb
- [ 0.002499] Initializing cgroup subsys pids
- [ 0.002777] EFI services will not be available.
- [ 0.002814] ASID allocator initialised with 65536 entries
- [ 0.039804] psci: failed to boot CPU1 (-95)
- [ 0.039828] CPU1: failed to boot: -95
- [ 0.051826] psci: failed to boot CPU2 (-95)
- [ 0.051848] CPU2: failed to boot: -95
- [ 0.063855] psci: failed to boot CPU3 (-95)
- [ 0.063877] CPU3: failed to boot: -95
- [ 0.063908] Brought up 1 CPUs
- [ 0.063926] SMP: Total of 1 processors activated.
- [ 0.063951] CPU: All CPU(s) started at EL1
- [ 0.063982] alternatives: patching kernel code
- [ 0.064469] devtmpfs: initialized
- [ 0.088230] DMI not present or invalid.
- [ 0.088605] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.094234] pinctrl core: initialized pinctrl subsystem
- [ 0.096451] NET: Registered protocol family 16
- [ 0.116234] cpuidle: using governor ladder
- [ 0.140093] cpuidle: using governor menu
- [ 0.140583] vdso: 2 pages (1 code @ ffffffc000d1d000, 1 data @ ffffffc000d1c000)
- [ 0.140647] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.141420] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.141773] Serial: AMBA PL011 UART driver
- [ 0.158457] irq: no irq domain found for /hexagon-smp2p/slave-kernel !
- [ 0.159473] irq: no irq domain found for /wcnss-smp2p/slave-kernel !
- [ 0.164822] irq: no irq domain found for /soc/qcom,mdss_mdp@1a00000 !
- [ 0.240799] msm_bus_fabric_init_driver
- [ 0.240994] msm_bus_device 580000.ad-hoc-bus: Dev 1024
- [ 0.241029] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 0.241064] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.241309] msm_bus_device 580000.ad-hoc-bus: Dev 0
- [ 0.241340] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 0.241374] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.241537] msm_bus_device 580000.ad-hoc-bus: Dev 4096
- [ 0.241567] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 0.241601] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.247422] msm_bus_init_clk: Valid node clk node 1024 ctx 0
- [ 0.247438] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid node clk node 0 ctx 0
- [ 0.247592] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
- [ 0.247749] msm_bus_init_clk: Valid node clk node 4096 ctx 1[ 0.403361] vgaarb: loaded
- [ 0.411438] SCSI subsystem initialized
- [ 0.452334] usbcore: registered new interface driver usbfs
- [ 0.454178] usbcore: registered new interface driver hub
- [ 0.456133] usbcore: registered new device driver usb
- [ 0.460289] media: Linux media interface: v0.10
- [ 0.461458] Linux video capture interface: v2.00
- [ 0.467578] dmi: Firmware registration failed.
- [ 0.470937] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.484617] Bluetooth: Core ver 2.21
- [ 0.487846] NET: Registered protocol family 31
- [ 0.487917] Bluetooth: HCI device and connection manager initialized
- [ 0.488118] Bluetooth: HCI socket layer initialized
- [ 0.488265] Bluetooth: L2CAP socket layer initialized
- [ 0.488586] Bluetooth: SCO socket layer initialized
- [ 0.505920] clocksource: Switched to clocksource arch_sys_counter
- [ 0.665236] NET: Registered protocol family 2
- [ 0.675137] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.677810] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
- [ 0.685203] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.691361] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.691691] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.696704] NET: Registered protocol family 1
- [ 0.707077] RPC: Registered named UNIX socket transport module.
- [ 0.707176] RPC: Registered udp transport module.
- [ 0.707205] RPC: Registered tcp transport module.
- [ 0.707241] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.710630] Unpacking initramfs...
- [ 1.948310] Freeing initrd memory: 4736K (ffffffc004000000 - ffffffc0044a0000)
- [ 1.957437] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
- [ 1.965490] kvm [1]: HYP mode not available
- [ 2.003366] futex hash table entries: 1024 (order: 5, 131072 bytes)
- [ 2.008455] audit: initializing netlink subsys (disabled)
- [ 2.010153] audit: type=2000 audit(1.995:1): initialized
- [ 2.026567] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 2.221142] VFS: Disk quotas dquot_6.6.0
- [ 2.225692] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 2.287593] NFS: Registering the id_resolver key type
- [ 2.288439] Key type id_resolver registered
- [ 2.288491] Key type id_legacy registered
- [ 2.292840] fuse init (API version 7.23)
- [ 2.305207] 9p: Installing v9fs 9p2000 file system support
- [ 2.332353] io scheduler noop registered
- [ 2.337799] io scheduler cfq registered (default)
- [ 2.509096] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 2.544957] msm_serial 78af000.serial: msm_serial: detected port #1
- [ 2.549216] msm_serial 78af000.serial: uartclk = 3686400
- [ 2.551350] 78af000.serial: ttyMSM1 at MMIO 0x78af000 (irq = 137, base_baud = 230400) is a MSM
- [ 2.558310] msm_serial 78b0000.serial: msm_serial: detected port #0
- [ 2.559239] msm_serial 78b0000.serial: uartclk = 3686400
- [ 2.559780] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 138, base_baud = 230400) is a MSM
- [ 2.559975] msm_serial: console setup on port #0
- [ 3.508737] console [ttyMSM0] enabled
- [ 3.520048] msm_serial: driver initialized
- [ 3.529723] [drm] Initialized drm 1.1.0 20060810
- [ 3.539018] l6: supplied by s4
- [ 3.587526] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
- [ 3.589677] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
- [ 3.597950] l2: supplied by s3
- [ 3.606841] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
- [ 3.608985] msm 1a00000.qcom,mdss_mdp: failed to bind 1a98000.qcom,mdss_dsi (ops dsi_ops): -517
- [ 3.623387] msm 1a00000.qcom,mdss_mdp: master bind failed: -517
- [ 3.786906] loop: module loaded
- [ 3.826316] spi_qup 78b7000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
- [ 3.844313] spi_qup 78b9000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
- [ 3.858786] spmi spmi-0: PMIC Arb Version-2 (0x20010000)
- [ 3.998572] tun: Universal TUN/TAP device driver, 1.6
- [ 3.999145] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 4.012979] sky2: driver version 1.30
- [ 4.020369] usbcore: registered new interface driver asix
- [ 4.022735] usbcore: registered new interface driver ax88179_178a
- [ 4.026186] usbcore: registered new interface driver cdc_ether
- [ 4.032497] usbcore: registered new interface driver dm9601
- [ 4.038123] usbcore: registered new interface driver smsc75xx
- [ 4.043809] usbcore: registered new interface driver net1080
- [ 4.049051] usbcore: registered new interface driver plusb
- [ 4.054708] usbcore: registered new interface driver cdc_subset
- [ 4.060038] usbcore: registered new interface driver zaurus
- [ 4.066470] usbcore: registered new interface driver cdc_ncm
- [ 4.097771] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.098282] ehci-pci: EHCI PCI platform driver
- [ 4.105001] ehci-platform: EHCI generic platform driver
- [ 4.110612] ehci-msm: Qualcomm On-Chip EHCI Host Controller
- [ 4.116613] msm_hsusb_host 78d9000.ehci: unable to find transceiver
- [ 4.120659] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 4.125326] ohci-pci: OHCI PCI platform driver
- [ 4.132491] ohci-platform: OHCI generic platform driver
- [ 4.138929] usbcore: registered new interface driver cdc_acm
- [ 4.140673] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 4.148302] usbcore: registered new interface driver usblp
- [ 4.155303] usbcore: registered new interface driver cdc_wdm
- [ 4.160761] usbcore: registered new interface driver uas
- [ 4.166872] usbcore: registered new interface driver usb-storage
- [ 4.173763] usbcore: registered new interface driver usbserial
- [ 4.177933] usbcore: registered new interface driver usbserial_generic
- [ 4.183532] usbserial: USB Serial support registered for generic
- [ 4.201376] usb3503 usb2513: switched to HUB mode
- [ 4.201493] usb3503 usb2513: usb3503_probe: probed in hub mode
- [ 4.216416] usbip_core: USB/IP Core v1.0.0
- [ 4.218689] usbcore: registered new device driver usbip-host
- [ 4.219734] usbip_host: USB/IP Host Driver v1.0.0
- [ 4.233453] mousedev: PS/2 mouse device common for all mice
- [ 4.254625] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pwrkey@800/input/input0
- [ 4.271631] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: rtc core: registered pm8xxx_rtc as rtc0
- [ 4.276077] i2c /dev entries driver
- [ 4.288182] i2c_qup 78b6000.i2c:
- [ 4.288182] tx channel not available
- [ 4.303266] i2c_qup 78b8000.i2c:
- [ 4.303266] tx channel not available
- [ 4.355748] i2c_qup 78ba000.i2c:
- [ 4.355748] tx channel not available
- [ 4.375985] qcom-camss 1b0ac00.camss: notifier->num_subdevs = 0
- [ 4.388176] msm_cci_init_gpio_params:1371 gpio count 0
- [ 4.407440] l3: supplied by s3
- [ 4.412584] CPR closed loop is enabled
- [ 4.417020] CPR is enabled!
- [ 4.442123] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
- [ 4.444506] Bluetooth: HCI UART driver ver 2.3
- [ 4.448631] Bluetooth: HCI UART protocol H4 registered
- [ 4.452340] Bluetooth: HCI UART protocol BCSP registered
- [ 4.457471] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 4.464983] usbcore: registered new interface driver btusb
- [ 4.477742] cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
- [ 4.495973] psci: Invalid PSCI power state 0x40000002
- [ 4.496150] CPUidle arm: CPU 0 failed to init idle CPU ops
- [ 4.510292] sdhci: Secure Digital Host Controller Interface driver
- [ 4.510473] sdhci: Copyright(c) Pierre Ossman
- [ 4.517985] Synopsys Designware Multimedia Card Interface Driver
- [ 4.523761] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 4.554067] l5: supplied by s4
- [ 4.605837] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
- [ 4.643451] sdhci_msm 7864900.sdhci: Got CD GPIO
- [ 4.696431] mmc0: MAN_BKOPS_EN bit is not set
- [ 4.707126] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
- [ 4.713414] mmc0: new HS200 MMC card at address 0001
- [ 4.742291] mmcblk0: mmc0:0001 DS1008 7.28 GiB
- [ 4.757770] mmcblk0boot0: mmc0:0001 DS1008 partition 1 4.00 MiB
- [ 4.773751] mmcblk0boot1: mmc0:0001 DS1008 partition 2 4.00 MiB
- [ 4.782220] ledtrig-cpu: registered to indicate activity on CPUs
- [ 4.786098] mmcblk0rpmb: mmc0:0001 DS1008 partition 3 4.00 MiB
- [ 4.826229] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
- [ 4.847927] usbcore: registered new interface driver usbhid
- [ 4.848244] usbhid: USB HID core driver
- [ 4.964112] 4080000.hexagon supply cx not found, using dummy regulator
- [ 4.979931] 4080000.hexagon supply mss not found, using dummy regulator
- [ 4.987798] l7: supplied by s4
- [ 5.008799] remoteproc0: 4080000.hexagon is available
- [ 5.008987] remoteproc0: Note: remoteproc is still under development and considered experimental.
- [ 5.013115] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
- [ 5.024729] remoteproc0: Direct firmware load for mba.mbn failed with error -2
- [ 5.044105] qcom-tz-pil soc:vidc_tzpil@0: no crash reason id
- [ 5.047541] soc:vidc_tzpil@0 supply qcom,pll not found, using dummy regulator
- [ 5.049579] qcom-tz-pil soc:vidc_tzpil@0: failed to read qcom,pll_uV, skipping
- [ 5.056303] qcom-tz-pil soc:vidc_tzpil@0: failed to read qcom,pll_uA, skipping
- [ 5.063547] qcom-tz-pil soc:vidc_tzpil@0: no wdog IRQ defined
- [ 5.070545] qcom-tz-pil soc:vidc_tzpil@0: no fatal IRQ defined
- [ 5.077732] qcom-tz-pil soc:vidc_tzpil@0: no ready IRQ defined
- [ 5.082241] qcom-tz-pil soc:vidc_tzpil@0: no handover IRQ defined
- [ 5.088218] qcom-tz-pil soc:vidc_tzpil@0: no stop-ack IRQ defined
- [ 5.094469] qcom-tz-pil soc:vidc_tzpil@0: Found relocation area 8388608@0x000000008f800000
- [ 5.100804] remoteproc1: soc:vidc_tzpil@0 is available
- [ 5.108211] remoteproc1: Note: remoteproc is still under development and considered experimental.
- [ 5.114479] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
- [ 5.123681] remoteproc1: Direct firmware load for venus.mdt failed with error -2
- [ 5.145921] remoteproc1: failed to load soc:vidc_tzpil@0
- [ 5.147177] mmc1: new ultra high speed SDR104 SDHC card at address 0007
- [ 5.170183] a204000.wcnss supply vddcx not found, using dummy regulator
- [ 5.185667] mmcblk1: mmc1:0007 SL16G 14.5 GiB
- [ 5.201045] remoteproc2: a204000.wcnss is available
- [ 5.201223] remoteproc2: Note: remoteproc is still under development and considered experimental.
- [ 5.207309] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
- [ 5.222297] remoteproc2: Direct firmware load for wcnss.mdt failed with error -2
- [ 5.229707] GPT:Primary header thinks Alt. header is not at the end of the disk.
- [ 5.231900] GPT:2097151 != 30318591
- [ 5.253525] GPT:Alternate GPT header not at the end of the disk.
- [ 5.253718] GPT:2097151 != 30318591
- [ 5.266332] GPT: Use GNU Parted to correct GPT errors.
- [ 5.266842] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9
- [ 5.361631] coresight-tmc 825000.etf: TMC initialized
- [ 5.456619] coresight-tmc 826000.etr: TMC initialized
- [ 5.468095] coresight-tpiu 820000.tpiu: TPIU initialized
- [ 5.478564] coresight-funnel 821000.funnel: FUNNEL initialized
- [ 5.484103] coresight-funnel 841000.funnel: FUNNEL initialized
- [ 5.502932] coresight-etm4x 85c000.etm: ETM 4.0 initialized
- [ 5.505202] coresight-etm4x 85d000.etm: ETM arch init failed
- [ 5.510268] ------------[ cut here ]------------
- [ 5.513429] WARNING: at drivers/clk/clk.c:684
- [ 5.518044] Modules linked in:
- [ 5.525177]
- [ 5.525365] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.23-96boards+ #1
- [ 5.526907] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
- [ 5.533598] task: ffffffc00eb70000 ti: ffffffc00eb78000 task.ti: ffffffc00eb78000
- [ 5.540521] PC is at clk_core_disable+0x50/0x58
- [ 5.547711] LR is at clk_disable+0x2c/0x48
- [ 5.552043] pc : [<ffffffc000662688>] lr : [<ffffffc00066281c>] pstate: 800001c5
- [ 5.556243] sp : ffffffc00eb7bbf0
- [ 5.563755] x29: ffffffc00eb7bbf0 x28: 0000000000000000
- [ 5.572045] x27: ffffffc000cf6f98 x26: ffffffc000cafe28
- [ 5.577340] x25: 0000000000000000 x24: ffffffc000d9eff8
- [ 5.582634] x23: ffffffc000d9f0c8 x22: ffffffc000d9eff8
- [ 5.587929] x21: 00000000ffffffea x20: 0000000000000140
- [ 5.593229] x19: ffffffc004010480 x18: 0000000000000000
- [ 5.598523] x17: 0000000000000007 x16: 0000000000000001
- [ 5.603823] x15: 0000000000000010 x14: ffffffc000d1e000
- [ 5.609113] x13: dead000000000100 x12: 0000000000000000
- [ 5.614407] x11: 0000000000008c00 x10: 0000000000000840
- [ 5.619702] x9 : ffffffc00eb7bb00 x8 : ffffffc00eb708a0
- [ 5.624997] x7 : ffffffc03d943f48 x6 : 0000000000000000
- [ 5.630292] x5 : 000000014855d87c x4 : 0000000000000000
- [ 5.635586] x3 : 00000000fffee065 x2 : 0000000000770076
- [ 5.640882] x1 : 0000000000000000 x0 : ffffffc033e8a700
- [ 5.646176]
- [ 5.646658] ---[ end trace 8e444da73479d431 ]---
- [ 5.648005] Call trace:
- [ 5.652549] [<ffffffc000662688>] clk_core_disable+0x50/0x58
- [ 5.654814] [<ffffffc0003cb924>] amba_put_disable_pclk.isra.2+0x1c/0x38
- [ 5.660318] [<ffffffc0003cbd74>] amba_probe+0x154/0x178
- [ 5.666963] [<ffffffc00049dadc>] driver_probe_device+0x21c/0x480
- [ 5.672136] [<ffffffc00049dddc>] __driver_attach+0x9c/0xa0
- [ 5.678488] [<ffffffc00049b898>] bus_for_each_dev+0x60/0xa0
- [ 5.683670] [<ffffffc00049d290>] driver_attach+0x20/0x28
- [ 5.689128] [<ffffffc00049ce00>] bus_add_driver+0x208/0x290
- [ 5.694696] [<ffffffc00049e5a0>] driver_register+0x60/0xf8
- [ 5.699994] [<ffffffc0003cb2d4>] amba_driver_register+0x54/0x60
- [ 5.705625] [<ffffffc000ca4190>] etm4x_driver_init+0x14/0x1c
- [ 5.711416] [<ffffffc000082990>] do_one_initcall+0xd0/0x1d8
- [ 5.717350] [<ffffffc000c70b3c>] kernel_init_freeable+0x1bc/0x260
- [ 5.722623] [<ffffffc0008be850>] kernel_init+0x18/0xe0
- [ 5.728829] [<ffffffc000085dd0>] ret_from_fork+0x10/0x40
- [ 5.735204] ------------[ cut here ]------------
- [ 5.739291] WARNING: at drivers/clk/clk.c:579
- [ 5.743902] Modules linked in:
- [ 5.751042]
- [ 5.751191] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.4.23-96boards+ #1
- [ 5.752790] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
- [ 5.760499] task: ffffffc00eb70000 ti: ffffffc00eb78000 task.ti: ffffffc00eb78000
- [ 5.767465] PC is at clk_core_unprepare+0x58/0x68
- [ 5.774797] LR is at clk_unprepare+0x28/0x40
- [ 5.779481] pc : [<ffffffc000662568>] lr : [<ffffffc000662ad8>] pstate: 60000145
- [ 5.783846] sp : ffffffc00eb7bbf0
- [ 5.791191] x29: ffffffc00eb7bbf0 x28: 0000000000000000
- [ 5.799476] x27: ffffffc000cf6f98 x26: ffffffc000cafe28
- [ 5.804770] x25: 0000000000000000 x24: ffffffc000d9eff8
- [ 5.810065] x23: ffffffc000d9f0c8 x22: ffffffc000d9eff8
- [ 5.815359] x21: 00000000ffffffea x20: ffffffc004010480
- [ 5.820659] x19: ffffffc004010480 x18: 0000000000000000
- [ 5.825954] x17: 0000000000000007 x16: 0000000000000001
- [ 5.831245] x15: 0000000000000010 x14: ffffffc000d1e000
- [ 5.836545] x13: dead000000000100 x12: 0000000002d5e344
- [ 5.841839] x11: 0000000000000000 x10: 0000000000000840
- [ 5.847133] x9 : ffffffc00eb7bb10 x8 : ffffffc00eb708a0
- [ 5.852428] x7 : ffffffc03d943f48 x6 : 0000000000000000
- [ 5.857722] x5 : 0000000155cc69a8 x4 : ffffffc00eb7bae0
- [ 5.863017] x3 : 0000000000000000 x2 : ffffffc00eb70000
- [ 5.868311] x1 : 0000000000000000 x0 : ffffffc033e8a700
- [ 5.873615]
- [ 5.873809] ---[ end trace 8e444da73479d432 ]---
- [ 5.875404] Call trace:
- [ 5.879971] [<ffffffc000662568>] clk_core_unprepare+0x58/0x68
- [ 5.882193] [<ffffffc0003cb92c>] amba_put_disable_pclk.isra.2+0x24/0x38
- [ 5.888094] [<ffffffc0003cbd74>] amba_probe+0x154/0x178
- [ 5.894516] [<ffffffc00049dadc>] driver_probe_device+0x21c/0x480
- [ 5.899724] [<ffffffc00049dddc>] __driver_attach+0x9c/0xa0
- [ 5.906016] [<ffffffc00049b898>] bus_for_each_dev+0x60/0xa0
- [ 5.911262] [<ffffffc00049d290>] driver_attach+0x20/0x28
- [ 5.916732] [<ffffffc00049ce00>] bus_add_driver+0x208/0x290
- [ 5.922289] [<ffffffc00049e5a0>] driver_register+0x60/0xf8
- [ 5.927587] [<ffffffc0003cb2d4>] amba_driver_register+0x54/0x60
- [ 5.933164] [<ffffffc000ca4190>] etm4x_driver_init+0x14/0x1c
- [ 5.938964] [<ffffffc000082990>] do_one_initcall+0xd0/0x1d8
- [ 5.944872] [<ffffffc000c70b3c>] kernel_init_freeable+0x1bc/0x260
- [ 5.950167] [<ffffffc0008be850>] kernel_init+0x18/0xe0
- [ 5.956400] [<ffffffc000085dd0>] ret_from_fork+0x10/0x40
- [ 5.963096] coresight-etm4x: probe of 85d000.etm failed with error -22
- [ 5.970321] coresight-etm4x 85e000.etm: ETM arch init failed
- [ 5.974387] ------------[ cut here ]------------
- [ 5.979047] WARNING: at drivers/clk/clk.c:684
- [ 5.983655] Modules linked in:
- [ 5.990796]
- [ 5.990936] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.4.23-96boards+ #1
- [ 5.992540] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
- [ 6.000253] task: ffffffc00eb70000 ti: ffffffc00eb78000 task.ti: ffffffc00eb78000
- [ 6.007245] PC is at clk_core_disable+0x50/0x58
- [ 6.014547] LR is at clk_disable+0x2c/0x48
- [ 6.018887] pc : [<ffffffc000662688>] lr : [<ffffffc00066281c>] pstate: 800001c5
- [ 6.023088] sp : ffffffc00eb7bbf0
- [ 6.030596] x29: ffffffc00eb7bbf0 x28: 0000000000000000
- [ 6.038887] x27: ffffffc000cf6f98 x26: ffffffc000cafe28
- [ 6.044182] x25: 0000000000000000 x24: ffffffc000d9eff8
- [ 6.049477] x23: ffffffc000d9f0c8 x22: ffffffc000d9eff8
- [ 6.054771] x21: 00000000ffffffea x20: 0000000000000140
- [ 6.060066] x19: ffffffc004010580 x18: 0000000000000000
- [ 6.065361] x17: 0000000000000007 x16: 0000000000000001
- [ 6.070655] x15: 0000000000000010 x14: ffffffc080de824f
- [ 6.075954] x13: ffffffc000de825d x12: 0000000000000000
- [ 6.081249] x11: 0000000000007000 x10: 0000000000000840
- [ 6.086543] x9 : ffffffc00eb7bb00 x8 : ffffffc00eb708a0
- [ 6.091838] x7 : ffffffc03d943f48 x6 : 0000000000000000
- [ 6.097132] x5 : 000000016410b029 x4 : 0000000000000000
- [ 6.102426] x3 : 00000000fffee0da x2 : 00000000007c007b
- [ 6.107721] x1 : 0000000000000000 x0 : ffffffc033e8a700
- [ 6.113015]
- [ 6.113216] ---[ end trace 8e444da73479d433 ]---
- [ 6.114811] Call trace:
- [ 6.119395] [<ffffffc000662688>] clk_core_disable+0x50/0x58
- [ 6.121612] [<ffffffc0003cb924>] amba_put_disable_pclk.isra.2+0x1c/0x38
- [ 6.127152] [<ffffffc0003cbd74>] amba_probe+0x154/0x178
- [ 6.133748] [<ffffffc00049dadc>] driver_probe_device+0x21c/0x480
- [ 6.138962] [<ffffffc00049dddc>] __driver_attach+0x9c/0xa0
- [ 6.145233] [<ffffffc00049b898>] bus_for_each_dev+0x60/0xa0
- [ 6.150503] [<ffffffc00049d290>] driver_attach+0x20/0x28
- [ 6.155962] [<ffffffc00049ce00>] bus_add_driver+0x208/0x290
- [ 6.161519] [<ffffffc00049e5a0>] driver_register+0x60/0xf8
- [ 6.166816] [<ffffffc0003cb2d4>] amba_driver_register+0x54/0x60
- [ 6.172411] [<ffffffc000ca4190>] etm4x_driver_init+0x14/0x1c
- [ 6.178202] [<ffffffc000082990>] do_one_initcall+0xd0/0x1d8
- [ 6.184110] [<ffffffc000c70b3c>] kernel_init_freeable+0x1bc/0x260
- [ 6.189405] [<ffffffc0008be850>] kernel_init+0x18/0xe0
- [ 6.195640] [<ffffffc000085dd0>] ret_from_fork+0x10/0x40
- [ 6.201495] ------------[ cut here ]------------
- [ 6.206125] WARNING: at drivers/clk/clk.c:579
- [ 6.210721] Modules linked in:
- [ 6.217881]
- [ 6.217997] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.4.23-96boards+ #1
- [ 6.219623] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
- [ 6.227337] task: ffffffc00eb70000 ti: ffffffc00eb78000 task.ti: ffffffc00eb78000
- [ 6.234297] PC is at clk_core_unprepare+0x58/0x68
- [ 6.241637] LR is at clk_unprepare+0x28/0x40
- [ 6.246313] pc : [<ffffffc000662568>] lr : [<ffffffc000662ad8>] pstate: 60000145
- [ 6.250689] sp : ffffffc00eb7bbf0
- [ 6.258021] x29: ffffffc00eb7bbf0 x28: 0000000000000000
- [ 6.266317] x27: ffffffc000cf6f98 x26: ffffffc000cafe28
- [ 6.271612] x25: 0000000000000000 x24: ffffffc000d9eff8
- [ 6.276906] x23: ffffffc000d9f0c8 x22: ffffffc000d9eff8
- [ 6.282205] x21: 00000000ffffffea x20: ffffffc004010580
- [ 6.287499] x19: ffffffc004010580 x18: 0000000000000000
- [ 6.292793] x17: 0000000000000007 x16: 0000000000000001
- [ 6.298088] x15: 0000000000000010 x14: ffffffc080de824f
- [ 6.303382] x13: ffffffc000de825d x12: 0000000002da1b2e
- [ 6.308677] x11: 0000000000000000 x10: 0000000000000840
- [ 6.313971] x9 : ffffffc00eb7bb10 x8 : ffffffc00eb708a0
- [ 6.319266] x7 : ffffffc03d943f48 x6 : 0000000000000000
- [ 6.324565] x5 : 00000001719e889a x4 : ffffffc00eb7bae0
- [ 6.329861] x3 : 0000000000000000 x2 : ffffffc00eb70000
- [ 6.335155] x1 : 0000000000000000 x0 : ffffffc033e8a700
- [ 6.340449]
- [ 6.340639] ---[ end trace 8e444da73479d434 ]---
- [ 6.342234] Call trace:
- [ 6.346820] [<ffffffc000662568>] clk_core_unprepare+0x58/0x68
- [ 6.349027] [<ffffffc0003cb92c>] amba_put_disable_pclk.isra.2+0x24/0x38
- [ 6.354933] [<ffffffc0003cbd74>] amba_probe+0x154/0x178
- [ 6.361364] [<ffffffc00049dadc>] driver_probe_device+0x21c/0x480
- [ 6.366561] [<ffffffc00049dddc>] __driver_attach+0x9c/0xa0
- [ 6.372822] [<ffffffc00049b898>] bus_for_each_dev+0x60/0xa0
- [ 6.378105] [<ffffffc00049d290>] driver_attach+0x20/0x28
- [ 6.383573] [<ffffffc00049ce00>] bus_add_driver+0x208/0x290
- [ 6.389126] [<ffffffc00049e5a0>] driver_register+0x60/0xf8
- [ 6.394435] [<ffffffc0003cb2d4>] amba_driver_register+0x54/0x60
- [ 6.399994] [<ffffffc000ca4190>] etm4x_driver_init+0x14/0x1c
- [ 6.405799] [<ffffffc000082990>] do_one_initcall+0xd0/0x1d8
- [ 6.411690] [<ffffffc000c70b3c>] kernel_init_freeable+0x1bc/0x260
- [ 6.417011] [<ffffffc0008be850>] kernel_init+0x18/0xe0
- [ 6.423250] [<ffffffc000085dd0>] ret_from_fork+0x10/0x40
- [ 6.428658] coresight-etm4x: probe of 85e000.etm failed with error -22
- [ 6.436544] coresight-etm4x 85f000.etm: ETM arch init failed
- [ 6.440861] ------------[ cut here ]------------
- [ 6.445881] WARNING: at drivers/clk/clk.c:684
- [ 6.450486] Modules linked in:
- [ 6.457644]
- [ 6.457778] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.4.23-96boards+ #1
- [ 6.459378] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
- [ 6.467093] task: ffffffc00eb70000 ti: ffffffc00eb78000 task.ti: ffffffc00eb78000
- [ 6.474055] PC is at clk_core_disable+0x50/0x58
- [ 6.481391] LR is at clk_disable+0x2c/0x48
- [ 6.485725] pc : [<ffffffc000662688>] lr : [<ffffffc00066281c>] pstate: 800001c5
- [ 6.489924] sp : ffffffc00eb7bbf0
- [ 6.497430] x29: ffffffc00eb7bbf0 x28: 0000000000000000
- [ 6.505726] x27: ffffffc000cf6f98 x26: ffffffc000cafe28
- [ 6.511021] x25: 0000000000000000 x24: ffffffc000d9eff8
- [ 6.516316] x23: ffffffc000d9f0c8 x22: ffffffc000d9eff8
- [ 6.521610] x21: 00000000ffffffea x20: 0000000000000140
- [ 6.526909] x19: ffffffc004010500 x18: 0000000000000000
- [ 6.532203] x17: 0000000000000007 x16: 0000000000000001
- [ 6.537497] x15: 0000000000000010 x14: ffffffc080de824f
- [ 6.542792] x13: ffffffc000de825d x12: 0000000000000000
- [ 6.548087] x11: 0000000000006c00 x10: 0000000000000840
- [ 6.553385] x9 : ffffffc00eb7bb00 x8 : ffffffc00eb708a0
- [ 6.558679] x7 : ffffffc03d943f48 x6 : 0000000000000000
- [ 6.563972] x5 : 000000017fe40118 x4 : 0000000000000000
- [ 6.569266] x3 : 00000000fffee14e x2 : 00000000007f007e
- [ 6.574561] x1 : 0000000000000000 x0 : ffffffc033e8a700
- [ 6.579856]
- [ 6.580052] ---[ end trace 8e444da73479d435 ]---
- [ 6.581647] Call trace:
- [ 6.586220] [<ffffffc000662688>] clk_core_disable+0x50/0x58
- [ 6.588436] [<ffffffc0003cb924>] amba_put_disable_pclk.isra.2+0x1c/0x38
- [ 6.593993] [<ffffffc0003cbd74>] amba_probe+0x154/0x178
- [ 6.600581] [<ffffffc00049dadc>] driver_probe_device+0x21c/0x480
- [ 6.605801] [<ffffffc00049dddc>] __driver_attach+0x9c/0xa0
- [ 6.612073] [<ffffffc00049b898>] bus_for_each_dev+0x60/0xa0
- [ 6.617345] [<ffffffc00049d290>] driver_attach+0x20/0x28
- [ 6.622809] [<ffffffc00049ce00>] bus_add_driver+0x208/0x290
- [ 6.628360] [<ffffffc00049e5a0>] driver_register+0x60/0xf8
- [ 6.633663] [<ffffffc0003cb2d4>] amba_driver_register+0x54/0x60
- [ 6.639233] [<ffffffc000ca4190>] etm4x_driver_init+0x14/0x1c
- [ 6.645028] [<ffffffc000082990>] do_one_initcall+0xd0/0x1d8
- [ 6.650942] [<ffffffc000c70b3c>] kernel_init_freeable+0x1bc/0x260
- [ 6.656247] [<ffffffc0008be850>] kernel_init+0x18/0xe0
- [ 6.662476] [<ffffffc000085dd0>] ret_from_fork+0x10/0x40
- [ 6.667845] ------------[ cut here ]------------
- [ 6.672975] WARNING: at drivers/clk/clk.c:579
- [ 6.677572] Modules linked in:
- [ 6.684719]
- [ 6.684836] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.4.23-96boards+ #1
- [ 6.686460] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
- [ 6.694169] task: ffffffc00eb70000 ti: ffffffc00eb78000 task.ti: ffffffc00eb78000
- [ 6.701128] PC is at clk_core_unprepare+0x58/0x68
- [ 6.708472] LR is at clk_unprepare+0x28/0x40
- [ 6.713153] pc : [<ffffffc000662568>] lr : [<ffffffc000662ad8>] pstate: 60000145
- [ 6.717529] sp : ffffffc00eb7bbf0
- [ 6.724860] x29: ffffffc00eb7bbf0 x28: 0000000000000000
- [ 6.733156] x27: ffffffc000cf6f98 x26: ffffffc000cafe28
- [ 6.738450] x25: 0000000000000000 x24: ffffffc000d9eff8
- [ 6.743750] x23: ffffffc000d9f0c8 x22: ffffffc000d9eff8
- [ 6.749045] x21: 00000000ffffffea x20: ffffffc004010500
- [ 6.754339] x19: ffffffc004010500 x18: 0000000000000000
- [ 6.759633] x17: 0000000000000007 x16: 0000000000000001
- [ 6.764926] x15: 0000000000000010 x14: ffffffc080de824f
- [ 6.770225] x13: ffffffc000de825d x12: 0000000002da30a2
- [ 6.775519] x11: 0000000000000000 x10: 0000000000000840
- [ 6.780813] x9 : ffffffc00eb7bb10 x8 : ffffffc00eb708a0
- [ 6.786108] x7 : ffffffc03d943f48 x6 : 0000000000000000
- [ 6.791402] x5 : 000000018d6cfb32 x4 : ffffffc00eb7bae0
- [ 6.796696] x3 : 0000000000000000 x2 : ffffffc00eb70000
- [ 6.801996] x1 : 0000000000000000 x0 : ffffffc033e8a700
- [ 6.807290]
- [ 6.807486] ---[ end trace 8e444da73479d436 ]---
- [ 6.809081] Call trace:
- [ 6.813654] [<ffffffc000662568>] clk_core_unprepare+0x58/0x68
- [ 6.815873] [<ffffffc0003cb92c>] amba_put_disable_pclk.isra.2+0x24/0x38
- [ 6.821775] [<ffffffc0003cbd74>] amba_probe+0x154/0x178
- [ 6.828179] [<ffffffc00049dadc>] driver_probe_device+0x21c/0x480
- [ 6.833398] [<ffffffc00049dddc>] __driver_attach+0x9c/0xa0
- [ 6.839648] [<ffffffc00049b898>] bus_for_each_dev+0x60/0xa0
- [ 6.844943] [<ffffffc00049d290>] driver_attach+0x20/0x28
- [ 6.850412] [<ffffffc00049ce00>] bus_add_driver+0x208/0x290
- [ 6.855968] [<ffffffc00049e5a0>] driver_register+0x60/0xf8
- [ 6.861255] [<ffffffc0003cb2d4>] amba_driver_register+0x54/0x60
- [ 6.866827] [<ffffffc000ca4190>] etm4x_driver_init+0x14/0x1c
- [ 6.872636] [<ffffffc000082990>] do_one_initcall+0xd0/0x1d8
- [ 6.878537] [<ffffffc000c70b3c>] kernel_init_freeable+0x1bc/0x260
- [ 6.883846] [<ffffffc0008be850>] kernel_init+0x18/0xe0
- [ 6.890080] [<ffffffc000085dd0>] ret_from_fork+0x10/0x40
- [ 6.897070] coresight-etm4x: probe of 85f000.etm failed with error -22
- [ 6.912465] coresight-replicator-qcom 824000.replicator: REPLICATOR 1.0 initialized
- [ 6.933521] usbcore: registered new interface driver snd-usb-audio
- [ 6.976471] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
- [ 6.977048] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
- [ 6.986748] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
- [ 6.997318] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
- [ 7.029703] msm8916-wcd-codec 200f000.spmi:pm8916@1:codec@f000: PMIC REV: 1 CODEC Version: 1
- [ 7.040348] qcom-apq8016-sbc 7702000.sound: adv7511 <-> Quatenary MI2S mapping ok
- [ 7.045227] qcom-apq8016-sbc 7702000.sound: msm8916_wcd_i2s_rx1 <-> Primary MI2S mapping ok
- [ 7.050631] qcom-apq8016-sbc 7702000.sound: msm8916_wcd_i2s_tx1 <-> Tertiary MI2S mapping ok
- [ 7.111134] NET: Registered protocol family 10
- [ 7.133526] sit: IPv6 over IPv4 tunneling driver
- [ 7.147199] NET: Registered protocol family 17
- [ 7.148699] Bluetooth: RFCOMM TTY layer initialized
- [ 7.151758] Bluetooth: RFCOMM socket layer initialized
- [ 7.155862] Bluetooth: RFCOMM ver 1.11
- [ 7.160799] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 7.164653] Bluetooth: HIDP socket layer initialized
- [ 7.172138] 9pnet: Installing 9P2000 support
- [ 7.177488] Key type dns_resolver registered
- [ 7.180267] NET: Registered protocol family 42
- [ 7.198108] registered taskstats version 1
- [ 7.217973] msm_iommu 1f00000.qcom,iommu: invalid resource
- [ 7.221232] msm_iommu 1f00000.qcom,iommu: iface: 100000000, core: 800000000
- [ 7.222739] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffffff8000b20000, with 2 ctx banks
- [ 7.230604] msm_iommu 1f00000.qcom,iommu: iommu sec: pgtable size: 94208
- [ 7.254836] genirq: Setting trigger mode 1 for irq 159 failed (gic_set_type+0x0/0x48)
- [ 7.255524] msm_iommu 1f00000.qcom,iommu: Request Global CFG IRQ 159 failed with ret=-22
- [ 7.272328] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
- [ 7.280370] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
- [ 7.283915] msm_iommu 1e00000.qcom,iommu: iface: 100000000, core: 800000000
- [ 7.287861] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8006400000, with 20 ctx banks
- [ 7.294950] genirq: Setting trigger mode 1 for irq 159 failed (gic_set_type+0x0/0x48)
- [ 7.304856] msm_iommu 1e00000.qcom,iommu: Request Global CFG IRQ 159 failed with ret=-22
- [ 7.318260] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
- [ 7.324816] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
- [ 7.331834] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
- [ 7.338614] msm_iommu_ctx 1e25000.venus_ns: context venus_ns using bank 5
- [ 7.345889] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
- [ 7.352107] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
- [ 7.358864] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
- [ 7.365917] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
- [ 7.372680] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
- [ 7.379520] msm_iommu_ctx 1e33000.venus_sec_pixel: context venus_sec_pixel using bank 19
- [ 7.386644] msm_iommu_ctx 1e34000.venus_sec_bitstream: context venus_sec_bitstream using bank 20
- [ 7.394758] msm_iommu_ctx 1e35000.venus_sec_non_pixel: context venus_sec_non_pixel using bank 21
- [ 7.403633] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
- [ 7.412493] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
- [ 7.419575] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
- [ 7.427365] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
- [ 7.434569] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
- [ 7.441717] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
- [ 7.449176] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
- [ 7.457596] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
- [ 7.490696] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
- [ 7.492943] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
- [ 7.506149] msm 1a00000.qcom,mdss_mdp: bound 1a98000.qcom,mdss_dsi (ops dsi_ops)
- [ 7.506698] msm 1a00000.qcom,mdss_mdp: bound 1c00000.qcom,adreno-3xx (ops a3xx_ops)
- [ 7.514263] 1a00000.qcom,mdss_mdp supply vdd not found, using dummy regulator
- [ 7.562295] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 7.562574] [drm] No driver support for vblank timestamp query.
- [ 7.573613] msm 1a00000.qcom,mdss_mdp: No connectors reported connected with modes
- [ 7.574010] [drm] Cannot find any crtc or sizes - going 1024x768
- [ 7.854741] Console: switching to colour frame buffer device 128x48
- [ 7.977086] msm 1a00000.qcom,mdss_mdp: fb0: msm frame buffer device
- [ 8.001799] [drm] Initialized msm 1.0.0 20130625 on minor 0
- [ 8.018399] msm_otg 78d9000.phy: OTG regs = ffffff800063e000
- [ 8.024242] msm_otg 78d9000.phy: no vddcx
- [ 8.141566] msm_hsusb_host 78d9000.ehci: EHCI Host Controller
- [ 8.141828] msm_hsusb_host 78d9000.ehci: new USB bus registered, assigned bus number 1
- [ 8.147295] msm_hsusb_host 78d9000.ehci: irq 149, io mem 0x078d9000
- [ 8.164604] input: gpio_keys as /devices/platform/gpio_keys/input/input1
- [ 8.165027] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: setting system clock to 1970-01-01 00:00:18 UTC (18)
- [ 8.170521] msm_hsusb_host 78d9000.ehci: USB 2.0 started, EHCI 1.00
- [ 8.185443] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 8.186203] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 8.193899] ALSA device list:
- [ 8.200286] usb usb1: Product: EHCI Host Controller
- [ 8.203318] #0: DB410c
- [ 8.208032] usb usb1: Manufacturer: Linux 4.4.23-96boards+ ehci_hcd
- [ 8.210782] usb usb1: SerialNumber: 78d9000.ehci
- [ 8.217098] Freeing unused kernel memory: 572K (ffffffc000c70000 - ffffffc000cff000)
- [ 8.221672] Freeing alternatives memory: 64K (ffffffc000cff000 - ffffffc000d0f000)
- [ 8.229881] hub 1-0:1.0: USB hub found
- [ 8.238487] hub 1-0:1.0: 1 port detected
- [ 8.295551] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
- [ 8.303596] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
- [ 8.311807] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
- [ 8.320939] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
- [ 8.330471] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
- [ 8.339751] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
- [ 8.351555] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
- [ 8.359141] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
- [ 8.367905] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
- [ 8.377349] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
- [ 8.561264] usb 1-1: new high-speed USB device number 2 using msm_hsusb_host
- [ 8.705804] usb 1-1: New USB device found, idVendor=0424, idProduct=2513
- [ 8.713203] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 8.723007] hub 1-1:1.0: USB hub found
- [ 8.732057] hub 1-1:1.0: 3 ports detected
- [ 9.013275] usb 1-1.1: new high-speed USB device number 3 using msm_hsusb_host
- [ 9.126168] usb 1-1.1: New USB device found, idVendor=0424, idProduct=7500
- [ 9.130637] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 9.136225] usb 1-1.1: Product: LAN7500
- [ 9.143437] usb 1-1.1: Manufacturer: SMSC
- [ 9.147600] usb 1-1.1: SerialNumber: 0000750665
- [ 9.155237] smsc75xx v1.0.0
- [ 9.216069] smsc75xx 1-1.1:1.0 eth0: register 'smsc75xx' at usb-78d9000.ehci-1.1, smsc75xx USB 2.0 Gigabit Ethernet, 00:80:0f:75:06:65
- [ 9.349526] initrd: found more than 10% free space on disk, resizing /dev/mmcblk1p9
- [ 9.353827] initrd: partition to full disk size, see /run/initramfs/resize-writable.log for details
- [ 10.780155] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9
- [ 12.013844] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
- [ 13.249565] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9
- [ 14.481524] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9
- [ 15.714063] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9
- [ 28.713076] initrd: checking filesystem for writable partition
- [ 28.744735] EXT4-fs (mmcblk1p9): couldn't mount as ext3 due to feature incompatibilities
- [ 28.784041] EXT4-fs (mmcblk1p9): mounted filesystem with ordered data mode. Opts: errors=remount-ro
- [ 28.909725] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 28.956724] EXT4-fs (mmcblk1p9): couldn't mount as ext3 due to feature incompatibilities
- [ 29.004059] EXT4-fs (mmcblk1p9): mounted filesystem with ordered data mode. Opts: (null)
- [ 29.205732] initrd: mounting /run
- [ 31.496600] systemd[1]: System time before build time, advancing clock.
- [ 31.540361] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCR)
- [ 31.550345] systemd[1]: Detected architecture arm64.
- [ 31.602757] systemd[1]: Set hostname to <localhost.localdomain>.
- [ 32.100669] systemd[1]: writable.mount: Unit is bound to inactive unit dev-mmcblk1p9.device. Stopping, too.
- [ 32.119655] systemd[1]: Reached target Swap.
- [ 32.129016] systemd[1]: Reached target Remote File Systems (Pre).
- [ 32.138613] systemd[1]: Created slice User and Session Slice.
- [ 32.147896] systemd[1]: Reached target Encrypted Volumes.
- [ 32.157122] systemd[1]: Listening on Journal Audit Socket.
- [ 32.166382] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 32.175768] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 32.185392] systemd[1]: Listening on Journal Socket.
- [ 32.194872] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 32.204105] systemd[1]: Listening on fsck to fsckd communication Socket.
- [ 32.213495] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 32.223289] systemd[1]: Listening on Syslog Socket.
- [ 32.233281] systemd[1]: Listening on udev Kernel Socket.
- [ 32.243238] systemd[1]: Listening on udev Control Socket.
- [ 32.253413] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 32.263461] systemd[1]: Reached target Remote File Systems.
- [ 32.273674] systemd[1]: Created slice System Slice.
- [ 32.288294] systemd[1]: Starting Load Kernel Modules...
- [ 32.318068] systemd[1]: Starting Nameserver information manager...
- [ 32.355290] systemd[1]: Starting Set the hostname to the value stored on the writable partition...
- [ 32.390714] systemd[1]: Mounting Huge Pages File System...
- [ 32.427046] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 32.465470] systemd[1]: Reached target Slices.
- [ 32.499961] systemd[1]: Created slice system-serial\x2dgetty.slice.
- [ 32.537566] systemd[1]: Created slice system-systemd\x2dfsck.slice.
- [ 32.565377] systemd[1]: Starting Set console keymap...
- [ 32.601752] systemd[1]: Starting Journal Service...
- [ 32.639207] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 32.671080] systemd[1]: Mounting POSIX Message Queue File System...
- [ 32.714871] systemd[1]: Mounting Debug File System...
- [ 32.884424] systemd[1]: Mounted Debug File System.
- [ 32.908223] systemd[1]: Mounted POSIX Message Queue File System.
- [ 32.935155] systemd[1]: Started Load Kernel Modules.
- [ 32.972084] systemd[1]: Started Set the hostname to the value stored on the writable partition.
- [ 33.013716] systemd[1]: Mounted Huge Pages File System.
- [ 33.039082] systemd[1]: Started Remount Root and Kernel File Systems.
- [ 33.134364] systemd[1]: Started Nameserver information manager.
- [ 33.188164] systemd[1]: Started Create Static Device Nodes in /dev.
- [ 33.466587] systemd[1]: Started Journal Service.
- [ 35.114406] remoteproc1: request_firmware failed: -2
- [ 35.141344] remoteproc1: request_firmware failed: -2
- [ 38.477312] EXT4-fs (mmcblk0rpmb): unable to read superblock
- [ 38.513119] EXT4-fs (mmcblk0rpmb): unable to read superblock
- [ 38.575810] EXT2-fs (mmcblk0rpmb): error: unable to read superblock
- [ 38.617990] FAT-fs (mmcblk0rpmb): unable to read boot sector
- Press enter to configure.
Add Comment
Please, Sign In to add comment