Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 24.970]
- X.Org X Server 1.13.0
- Release Date: 2012-09-05
- [ 24.970] X Protocol Version 11, Revision 0
- [ 24.970] Build Operating System: Linux 3.4.9-gentoo x86_64 Gentoo
- [ 24.970] Current Operating System: Linux Geass 3.4.9-gentoo #1 SMP PREEMPT Sun Oct 7 20:38:45 GMT 2012 x86_64
- [ 24.970] Kernel command line: root=/dev/ram0 real_root=/dev/sda6
- [ 24.971] Build Date: 07 October 2012 10:06:00PM
- [ 24.971]
- [ 24.971] Current version of pixman: 0.26.0
- [ 24.971] Before reporting problems, check http://wiki.x.org
- to make sure that you have the latest version.
- [ 24.971] Markers: (--) probed, (**) from config file, (==) default setting,
- (++) from command line, (!!) notice, (II) informational,
- (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
- [ 24.972] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 7 22:09:40 2012
- [ 24.973] (==) Using config file: "/etc/X11/xorg.conf"
- [ 24.973] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
- [ 24.973] (==) No Layout section. Using the first Screen section.
- [ 24.973] (**) |-->Screen "Default Screen" (0)
- [ 24.973] (**) | |-->Monitor "<default monitor>"
- [ 24.973] (==) No device specified for screen "Default Screen".
- Using the first device section listed.
- [ 24.973] (**) | |-->Device "Device0"
- [ 24.973] (==) No monitor specified for screen "Default Screen".
- Using a default monitor configuration.
- [ 24.973] (==) Automatically adding devices
- [ 24.973] (==) Automatically enabling devices
- [ 24.973] (==) Automatically adding GPU devices
- [ 24.973] (==) FontPath set to:
- /usr/share/fonts/misc/,
- /usr/share/fonts/TTF/,
- /usr/share/fonts/OTF/,
- /usr/share/fonts/Type1/,
- /usr/share/fonts/100dpi/,
- /usr/share/fonts/75dpi/
- [ 24.973] (==) ModulePath set to "/usr/lib64/xorg/modules"
- [ 24.973] (II) The server relies on udev to provide the list of input devices.
- If no devices become available, reconfigure udev or disable AutoAddDevices.
- [ 24.974] (II) Loader magic: 0x806be0
- [ 24.974] (II) Module ABI versions:
- [ 24.974] X.Org ANSI C Emulation: 0.4
- [ 24.974] X.Org Video Driver: 13.0
- [ 24.974] X.Org XInput driver : 18.0
- [ 24.974] X.Org Server Extension : 7.0
- [ 24.975] (--) PCI:*(0:1:0:0) 10de:1189:1462:2840 rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
- [ 24.975] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
- [ 24.975] Initializing built-in extension Generic Event Extension
- [ 24.975] Initializing built-in extension SHAPE
- [ 24.975] Initializing built-in extension MIT-SHM
- [ 24.975] Initializing built-in extension XInputExtension
- [ 24.975] Initializing built-in extension XTEST
- [ 24.976] Initializing built-in extension BIG-REQUESTS
- [ 24.976] Initializing built-in extension SYNC
- [ 24.976] Initializing built-in extension XKEYBOARD
- [ 24.976] Initializing built-in extension XC-MISC
- [ 24.976] Initializing built-in extension XINERAMA
- [ 24.976] Initializing built-in extension XFIXES
- [ 24.976] Initializing built-in extension RENDER
- [ 24.976] Initializing built-in extension RANDR
- [ 24.977] Initializing built-in extension COMPOSITE
- [ 24.977] Initializing built-in extension DAMAGE
- [ 24.977] Initializing built-in extension MIT-SCREEN-SAVER
- [ 24.977] Initializing built-in extension DOUBLE-BUFFER
- [ 24.977] Initializing built-in extension RECORD
- [ 24.977] Initializing built-in extension DPMS
- [ 24.977] Initializing built-in extension X-Resource
- [ 24.977] Initializing built-in extension XVideo
- [ 24.978] Initializing built-in extension XVideo-MotionCompensation
- [ 24.978] Initializing built-in extension XFree86-VidModeExtension
- [ 24.978] Initializing built-in extension XFree86-DGA
- [ 24.978] Initializing built-in extension XFree86-DRI
- [ 24.978] Initializing built-in extension DRI2
- [ 24.978] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
- [ 24.978] (II) LoadModule: "glx"
- [ 24.978] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
- [ 25.034] (II) Module glx: vendor="NVIDIA Corporation"
- [ 25.034] compiled for 4.0.2, module version = 1.0.0
- [ 25.034] Module class: X.Org Server Extension
- [ 25.034] (II) NVIDIA GLX Module 304.51 Tue Sep 18 17:38:06 PDT 2012
- [ 25.034] Loading extension GLX
- [ 25.034] (II) LoadModule: "nvidia"
- [ 25.034] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
- [ 25.039] (II) Module nvidia: vendor="NVIDIA Corporation"
- [ 25.039] compiled for 4.0.2, module version = 1.0.0
- [ 25.039] Module class: X.Org Video Driver
- [ 25.040] (II) NVIDIA dlloader X Driver 304.51 Tue Sep 18 17:18:40 PDT 2012
- [ 25.040] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
- [ 25.040] (--) using VT number 7
- [ 25.044] (II) Loading sub module "fb"
- [ 25.044] (II) LoadModule: "fb"
- [ 25.044] (II) Loading /usr/lib64/xorg/modules/libfb.so
- [ 25.045] (II) Module fb: vendor="X.Org Foundation"
- [ 25.045] compiled for 1.13.0, module version = 1.0.0
- [ 25.045] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 25.045] (II) Loading sub module "wfb"
- [ 25.045] (II) LoadModule: "wfb"
- [ 25.045] (II) Loading /usr/lib64/xorg/modules/libwfb.so
- [ 25.046] (II) Module wfb: vendor="X.Org Foundation"
- [ 25.046] compiled for 1.13.0, module version = 1.0.0
- [ 25.046] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 25.046] (II) Loading sub module "ramdac"
- [ 25.046] (II) LoadModule: "ramdac"
- [ 25.046] (II) Module "ramdac" already built-in
- [ 25.047] (II) NVIDIA(0): Creating default Display subsection in Screen section
- "Default Screen" for depth/fbbpp 24/32
- [ 25.047] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
- [ 25.047] (==) NVIDIA(0): RGB weight 888
- [ 25.047] (==) NVIDIA(0): Default visual is TrueColor
- [ 25.047] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
- [ 25.047] (**) NVIDIA(0): Option "UseEvents" "True"
- [ 25.047] (**) NVIDIA(0): Enabling 2D acceleration
- [ 25.642] (II) NVIDIA(GPU-0): Display (Philips 273EL (DFP-3)) does not support NVIDIA 3D
- [ 25.642] (II) NVIDIA(GPU-0): Vision stereo.
- [ 25.644] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 670 (GK104) at PCI:1:0:0 (GPU-0)
- [ 25.644] (--) NVIDIA(0): Memory: 2097152 kBytes
- [ 25.644] (--) NVIDIA(0): VideoBIOS: 80.04.19.00.0b
- [ 25.644] (II) NVIDIA(0): Detected PCI Express Link width: 16X
- [ 25.644] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
- [ 25.648] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 670 at PCI:1:0:0
- [ 25.648] (--) NVIDIA(0): CRT-0
- [ 25.648] (--) NVIDIA(0): DFP-0
- [ 25.648] (--) NVIDIA(0): DFP-1
- [ 25.648] (--) NVIDIA(0): DFP-2
- [ 25.648] (--) NVIDIA(0): Philips 273EL (DFP-3) (connected)
- [ 25.648] (--) NVIDIA(0): DFP-4
- [ 25.648] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
- [ 25.648] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
- [ 25.648] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
- [ 25.648] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
- [ 25.648] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
- [ 25.648] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
- [ 25.648] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
- [ 25.648] (--) NVIDIA(0): Philips 273EL (DFP-3): 330.0 MHz maximum pixel clock
- [ 25.648] (--) NVIDIA(0): Philips 273EL (DFP-3): Internal Dual Link TMDS
- [ 25.648] (--) NVIDIA(0): DFP-4: 960.0 MHz maximum pixel clock
- [ 25.648] (--) NVIDIA(0): DFP-4: Internal DisplayPort
- [ 25.648] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
- [ 25.648] (**) NVIDIA(0): device Philips 273EL (DFP-3) (Using EDID frequencies has
- [ 25.648] (**) NVIDIA(0): been enabled on all display devices.)
- [ 25.649] (==) NVIDIA(0):
- [ 25.649] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
- [ 25.649] (==) NVIDIA(0): will be used as the requested mode.
- [ 25.649] (==) NVIDIA(0):
- [ 25.649] (II) NVIDIA(0): Validated MetaModes:
- [ 25.649] (II) NVIDIA(0): "DFP-3:nvidia-auto-select"
- [ 25.649] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
- [ 25.676] (--) NVIDIA(0): DPI set to (81, 80); computed from "UseEdidDpi" X config
- [ 25.676] (--) NVIDIA(0): option
- [ 25.676] (--) Depth 24 pixmap format is 32 bpp
- [ 25.676] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
- [ 25.676] (II) NVIDIA: access.
- [ 25.679] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
- [ 25.679] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
- [ 25.679] (II) NVIDIA(0): configuration option may not be set correctly. When the
- [ 25.679] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
- [ 25.679] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
- [ 25.679] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
- [ 25.679] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
- [ 25.679] (II) NVIDIA(0): Config Options in the README.
- [ 25.683] (II) NVIDIA(0): Setting mode "DFP-3:nvidia-auto-select"
- [ 25.720] Loading extension NV-GLX
- [ 25.744] (==) NVIDIA(0): Disabling shared memory pixmaps
- [ 25.744] (==) NVIDIA(0): Backing store disabled
- [ 25.744] (==) NVIDIA(0): Silken mouse enabled
- [ 25.745] (==) NVIDIA(0): DPMS enabled
- [ 25.745] Loading extension NV-CONTROL
- [ 25.745] Loading extension XINERAMA
- [ 25.745] (II) Loading sub module "dri2"
- [ 25.745] (II) LoadModule: "dri2"
- [ 25.745] (II) Module "dri2" already built-in
- [ 25.745] (II) NVIDIA(0): [DRI2] Setup complete
- [ 25.745] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
- [ 25.745] (--) RandR disabled
- [ 25.749] (II) Initializing extension GLX
- [ 25.810] (II) config/udev: Adding input device Power Button (/dev/input/event2)
- [ 25.810] (**) Power Button: Applying InputClass "evdev keyboard catchall"
- [ 25.810] (II) LoadModule: "evdev"
- [ 25.810] (WW) Warning, couldn't open module evdev
- [ 25.810] (II) UnloadModule: "evdev"
- [ 25.810] (II) Unloading evdev
- [ 25.810] (EE) Failed to load module "evdev" (module does not exist, 0)
- [ 25.810] (EE) No input driver matching `evdev'
- [ 25.810] (II) config/udev: Adding input device Power Button (/dev/input/event1)
- [ 25.810] (**) Power Button: Applying InputClass "evdev keyboard catchall"
- [ 25.810] (II) LoadModule: "evdev"
- [ 25.810] (WW) Warning, couldn't open module evdev
- [ 25.810] (II) UnloadModule: "evdev"
- [ 25.810] (II) Unloading evdev
- [ 25.810] (EE) Failed to load module "evdev" (module does not exist, 0)
- [ 25.810] (EE) No input driver matching `evdev'
- [ 25.810] (II) config/udev: Adding input device Logitech Logitech Dual Action (/dev/input/event0)
- [ 25.810] (II) No input driver specified, ignoring this device.
- [ 25.810] (II) This device may have been added with another device file.
- [ 25.810] (II) config/udev: Adding input device Logitech Logitech Dual Action (/dev/input/js0)
- [ 25.810] (II) No input driver specified, ignoring this device.
- [ 25.810] (II) This device may have been added with another device file.
- [ 25.810] (II) config/udev: Adding input device Logitech G510 Gaming Keyboard (/dev/input/event3)
- [ 25.810] (**) Logitech G510 Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
- [ 25.810] (II) LoadModule: "evdev"
- [ 25.810] (WW) Warning, couldn't open module evdev
- [ 25.810] (II) UnloadModule: "evdev"
- [ 25.810] (II) Unloading evdev
- [ 25.810] (EE) Failed to load module "evdev" (module does not exist, 0)
- [ 25.810] (EE) No input driver matching `evdev'
- [ 25.811] (II) config/udev: Adding input device Logitech G510 Gaming Keyboard (/dev/input/event4)
- [ 25.811] (**) Logitech G510 Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
- [ 25.811] (II) LoadModule: "evdev"
- [ 25.811] (WW) Warning, couldn't open module evdev
- [ 25.811] (II) UnloadModule: "evdev"
- [ 25.811] (II) Unloading evdev
- [ 25.811] (EE) Failed to load module "evdev" (module does not exist, 0)
- [ 25.811] (EE) No input driver matching `evdev'
- [ 25.811] (II) config/udev: Adding input device Logitech Gaming Mouse G400 (/dev/input/event5)
- [ 25.811] (**) Logitech Gaming Mouse G400: Applying InputClass "evdev pointer catchall"
- [ 25.811] (II) LoadModule: "evdev"
- [ 25.811] (WW) Warning, couldn't open module evdev
- [ 25.811] (II) UnloadModule: "evdev"
- [ 25.811] (II) Unloading evdev
- [ 25.811] (EE) Failed to load module "evdev" (module does not exist, 0)
- [ 25.811] (EE) No input driver matching `evdev'
- [ 25.811] (II) config/udev: Adding input device Logitech Gaming Mouse G400 (/dev/input/mouse0)
- [ 25.811] (II) No input driver specified, ignoring this device.
- [ 25.811] (II) This device may have been added with another device file.
- [ 26.006] Server terminated successfully (0). Closing log file.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement