API tools faq
paste
Advertisement
Guest User

Ubuntu 16.04 LTS pcduino3nano NAND/SATA

a guest
Jun 23rd, 2016
303
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 32.02 KB | None | 0 0
raw download clone embed print report
  1. HELLO! BOOT0 is starting!
  2. boot0 version : 2.0.0?
  3. read dram para.
  4. dram driver version: 1.15
  5. dram size =1024MB
  6. 0xffffffff
  7. super_standby_flag = 0
  8. Succeed in opening nand flash.
  9. block from 2 to 6
  10. deal block 2
  11. Succeed in reading Boot1 file head.
  12. The size of Boot1 is 0x0006c000.
  13. The file stored in 0x00000000 of block 2 is perfect.
  14. Check is correct.
  15. Ready to disable icache.
  16. Succeed in loading Boot1.
  17. Jump to Boot1.
  18. [ 0.148] boot1 version : 2.0.0
  19. [ 0.148] DEBUG:L350(start/eGon2_start.c):total boot1 file length = 442368
  20. [ 0.152] DEBUG:L351(start/eGon2_start.c):boot1 length = 376832
  21. [ 0.158] DEBUG:L352(start/eGon2_start.c):script start addr = 0x4245c000, size = 65536
  22. [ 0.167] DEBUG:L354(start/eGon2_start.c):script dest buffer = 0x43000000
  23. [ 0.174] DEBUG:L356(start/eGon2_start.c):size=65536
  24. [ 0.180] script installed early ok
  25. [ 0.183] pmu type = 3
  26. [ 0.287] bat vol = 0 mv
  27. [ 0.287] DEBUG:L274(standby/power_ops.c):core_para->vol_threshold =0
  28. [ 0.290] DEBUG:L275(standby/power_ops.c):core_para->user_set_core_vol =1400
  29. [ 0.298] DEBUG:L276(standby/power_ops.c):core_para->user_set_clock =912
  30. [ 0.305] DEBUG:L334(standby/power_ops.c):no baterry ratio flag,dcin_exist,set BATTERY_RATIO_ENOUGH
  31. [ 0.314] DEBUG:L354(standby/power_ops.c):after set,power_step_level=3
  32. [ 0.335] axi:ahb:apb=4:2:2
  33. [ 0.335] set dcdc2=1400mv, clock=912M successed
  34. [ 0.337] key
  35. [ 0.350] no key found
  36. [ 0.350] flash init start
  37. [ 0.350] NB1 : enter NFB_Init
  38. [ 0.353] NB1 : enter phy init
  39. [ 0.356] [NAND] nand driver(b) version: 0x0x00000002, 0x0x00000012, data: 0x20130627
  40. [ 0.364] get the good blk ratio from hwscan : 840
  41. [ 0.369] NB1 : nand phy init ok
  42. [ 1.073] _RepairLogBlkTbl start
  43. [ 1.075] Log Block Index 0x00000000, LogicBlockNum: 0x00000037, LogBlockType: 0x00000000
  44. [ 1.079] log0: 0x00000039, Log1: 0x0000ffff, WriteIndex: 0x00000000
  45. [ 1.085] datablock: 0x000001a8, lastusedpage: 0x00000003
  46. [ 1.094] Log Block Index 0x00000001, LogicBlockNum: 0x00000032, LogBlockType: 0x00000000
  47. [ 1.100] log0: 0x000001a9, Log1: 0x0000ffff, WriteIndex: 0x00000000
  48. [ 1.106] datablock: 0x0000000d, lastusedpage: 0x00000008
  49. [ 1.114] Log Block Index 0x00000002, LogicBlockNum: 0x00000033, LogBlockType: 0x00000000
  50. [ 1.120] log0: 0x00000045, Log1: 0x0000ffff, WriteIndex: 0x00000000
  51. [ 1.127] datablock: 0x00000341, lastusedpage: 0x00000003
  52. [ 1.134] Log Block Index 0x00000003, LogicBlockNum: 0x0000003e, LogBlockType: 0x00000000
  53. [ 1.141] log0: 0x0000034e, Log1: 0x0000ffff, WriteIndex: 0x00000000
  54. [ 1.147] datablock: 0x00000345, lastusedpage: 0x00000002
  55. [ 1.155] Log Block Index 0x00000004, LogicBlockNum: 0x00000040, LogBlockType: 0x00000000
  56. [ 1.161] log0: 0x0000033a, Log1: 0x0000ffff, WriteIndex: 0x00000000
  57. [ 1.168] datablock: 0x00000352, lastusedpage: 0x00000008
  58. [ 1.176] Log Block Index 0x00000005, LogicBlockNum: 0x00000039, LogBlockType: 0x00000000
  59. [ 1.182] log0: 0x00000353, Log1: 0x0000ffff, WriteIndex: 0x00000000
  60. [ 1.189] datablock: 0x000000ad, lastusedpage: 0x00000002
  61. [ 1.196] Log Block Index 0x00000006, LogicBlockNum: 0x0000003f, LogBlockType: 0x00000000
  62. [ 1.203] log0: 0x00000355, Log1: 0x0000ffff, WriteIndex: 0x00000000
  63. [ 1.209] datablock: 0x00000040, lastusedpage: 0x00000003
  64. [ 1.217] Log Block Index 0x00000007, LogicBlockNum: 0x00000010, LogBlockType: 0x00000000
  65. [ 1.223] log0: 0x00000041, Log1: 0x0000ffff, WriteIndex: 0x00000000
  66. [ 1.230] datablock: 0x0000039b, lastusedpage: 0x00000002
  67. [ 1.238] Log Block Index 0x00000008, LogicBlockNum: 0x00000035, LogBlockType: 0x00000000
  68. [ 1.244] log0: 0x0000003f, Log1: 0x0000ffff, WriteIndex: 0x00000000
  69. [ 1.250] datablock: 0x000003c3, lastusedpage: 0x00000004
  70. [ 1.258] Log Block Index 0x00000009, LogicBlockNum: 0x00000034, LogBlockType: 0x00000000
  71. [ 1.265] log0: 0x000000b8, Log1: 0x0000ffff, WriteIndex: 0x00000000
  72. [ 1.271] datablock: 0x000003dd, lastusedpage: 0x00000002
  73. [ 1.279] Log Block Index 0x0000000a, LogicBlockNum: 0x00000031, LogBlockType: 0x00000000
  74. [ 1.285] log0: 0x000000af, Log1: 0x0000ffff, WriteIndex: 0x00000000
  75. [ 1.292] datablock: 0x000003df, lastusedpage: 0x00000004
  76. [ 1.300] Log Block Index 0x0000000b, LogicBlockNum: 0x00000045, LogBlockType: 0x00000000
  77. [ 1.306] log0: 0x000003e5, Log1: 0x0000ffff, WriteIndex: 0x00000000
  78. [ 1.312] datablock: 0x000001a7, lastusedpage: 0x00000001
  79. [ 1.320] Log Block Index 0x0000000c, LogicBlockNum: 0x00000009, LogBlockType: 0x00000000
  80. [ 1.326] log0: 0x000003ea, Log1: 0x0000ffff, WriteIndex: 0x00000000
  81. [ 1.333] datablock: 0x0000033f, lastusedpage: 0x00000001
  82. [ 1.341] Log Block Index 0x0000000d, LogicBlockNum: 0x00000048, LogBlockType: 0x00000000
  83. [ 1.347] log0: 0x0000033d, Log1: 0x0000ffff, WriteIndex: 0x00000000
  84. [ 1.354] datablock: 0x000003ee, lastusedpage: 0x00000001
  85. [ 1.361] Log Block Index 0x0000000e, LogicBlockNum: 0x000001b0, LogBlockType: 0x00000000
  86. [ 1.368] log0: 0x000003db, Log1: 0x0000ffff, WriteIndex: 0x00000000
  87. [ 1.374] datablock: 0x000003f9, lastusedpage: 0x0000002d
  88. [ 1.382] Log Block Index 0x0000000f, LogicBlockNum: 0x00000008, LogBlockType: 0x00000000
  89. [ 1.388] log0: 0x000003fc, Log1: 0x0000ffff, WriteIndex: 0x00000000
  90. [ 1.395] datablock: 0x0000003c, lastusedpage: 0x00000003
  91. [ 1.400] _RepairLogBlkTbl end
  92. [ 1.414] NB1 : init ok
  93. [ 1.414] flash init finish
  94. [ 1.416] fs init ok
  95. [ 1.418] fattype FAT16
  96. [ 1.419] fs mount ok
  97. [ 1.423] DEBUG:L376(start/eGon2_start.c):dram_para_set start
  98. [ 1.428] DEBUG:L397(start/eGon2_start.c):dram_para_set end
  99. [ 1.433] nand good_block_ratio=840
  100. [ 1.437] storage_type=0
  101. [ 1.448] 0
  102. [ 1.448] set pc
  103. [ 1.448] usbdc_vol = 4000, usbdc_cur = 0
  104. [ 1.450] usbpc_vol = 4000, usbpc_cur = 0
  105. [ 1.454] init to usb pc
  106. [ 1.457] set pc
  107. [ 1.471] can't find c:\drv_de.drv
  108. [ 1.471] ERR: wBoot_driver_install display driver failed
  109. [ 1.475] key value = 0
  110. [ 1.477] recovery key high 6, low 4
  111. [ 1.482] show pic finish
  112. [ 1.484] load kernel start
  113. [ 1.502] load kernel successed
  114. [ 1.502] start address = 0x4a000000
  115. [ 1.504] ERR: display driver not open yet
  116. [ 1.508] ERR: display driver not open yet
  117. [ 1.513] power exit detect
  118.  
  119. U-Boot 2011.09-rc1-00000-gc1cb2f9 (May 30 2014 - 10:19:03) Allwinner Technology
  120.  
  121. CPU: SUNXI Family
  122. Board: SUN7I-EVB
  123. DRAM: 1 GiB
  124. NAND: NB1 : enter NFB_Init
  125. [NAND] nand driver(b) version: 0x2, 0x12, data: 20130526
  126. [NAND] set nand_good_block_ratio 840
  127. NB1 : nand phy init ok
  128. NB1 : init ok
  129. 3360 MiB
  130. Using default environment
  131.  
  132. In: serial
  133. Out: serial
  134. Err: serial
  135. --------fastboot partitions--------
  136. -total partitions:2-
  137. -name- -start- -size-
  138. bootloader : 10000 10000
  139. linux : 20000 670000
  140. -----------------------------------
  141. no misc partition is found
  142. Hit any key to stop autoboot: 0
  143. ** File not found /boot/uEnv.txt **
  144. reading /uEnv.txt
  145.  
  146. 158 bytes read
  147. ## Warning: defaulting to text format
  148. ** File not found /boot/script.bin **
  149. reading /script.bin
  150.  
  151. 49300 bytes read
  152. ** File not found /boot/uImage **
  153. reading /uImage
  154.  
  155. 5606304 bytes read
  156. ## Booting kernel from Legacy Image at 48000000 ...
  157. Image Name: Linux kernel
  158. Image Type: ARM Linux Kernel Image (uncompressed)
  159. Data Size: 5606240 Bytes = 5.3 MiB
  160. Load Address: 40008000
  161. Entry Point: 40008000
  162. Verifying Checksum ... OK
  163. Loading Kernel Image ... OK
  164. OK
  165. Using machid 0x10bb from environment
  166.  
  167. Starting kernel ...
  168.  
  169. <6>Booting Linux on physical CPU 0
  170. <6>Initializing cgroup subsys cpuset
  171. <6>Initializing cgroup subsys cpu
  172. <5>Linux version 3.4.112-sun7i (root@pluton) (gcc version 5.3.1 20160413 (Ubuntu/Linaro 5.3.1-14ubuntu2) ) #12 SMP PREEMPT Wed Jun 22 17:42:30 CEST 2016
  173. CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  174. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  175. Machine: sun7i
  176. <6>Memory Reserved:
  177. <6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  178. <6> VE : 0x44000000 - 0x48ffffff ( 80 MB)
  179. <6> G2D : 0x49000000 - 0x49ffffff ( 16 MB)
  180. <6> LCD : 0x4a000000 - 0x4bffffff ( 32 MB)
  181. Memory policy: ECC disabled, Data cache writealloc
  182. <6>sunxi: Allwinner A20 (AW1651/sun7i) detected.
  183. <7>On node 0 totalpages: 262144
  184. <7>free_area_init_node: node 0, pgdat c0a89440, node_mem_map d0000000
  185. <7> DMA zone: 512 pages used for memmap
  186. <7> DMA zone: 0 pages reserved
  187. <7> DMA zone: 65024 pages, LIFO batch:15
  188. <7> Normal zone: 1008 pages used for memmap
  189. <7> Normal zone: 128016 pages, LIFO batch:31
  190. <7> HighMem zone: 528 pages used for memmap
  191. <7> HighMem zone: 67056 pages, LIFO batch:15
  192. <6>PERCPU: Embedded 8 pages/cpu @d0808000 s8256 r8192 d16320 u32768
  193. <7>pcpu-alloc: s8256 r8192 d16320 u32768 alloc=8*4096<c>
  194. <7>pcpu-alloc: <c>[0] <c>0 <c>[0] <c>1 <c>
  195. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
  196. <5>Kernel command line: console=ttyS0,115200 root=/dev/sda2 rootwait loglevel=8 console=tty1 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:0 consoleblank=0 loglevel=1
  197. <6>PID hash table entries: 4096 (order: 2, 16384 bytes)
  198. <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  199. <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  200. <6>allocated 2097152 bytes of page_cgroup
  201. <6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
  202. <6>Memory: 1024MB = 1024MB total
  203. <5>Memory: 893604k/893604k available, 154972k reserved, 270336K highmem
  204. <5>Virtual kernel memory layout:
  205. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  206. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  207. vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  208. lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  209. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  210. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  211. .text : 0xc0008000 - 0xc09dfe98 (10080 kB)
  212. .init : 0xc09e0000 - 0xc0a18040 ( 225 kB)
  213. .data : 0xc0a1a000 - 0xc0a91d68 ( 480 kB)
  214. .bss : 0xc0a91d8c - 0xc0c66f78 (1877 kB)
  215. <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  216. <6>Preemptible hierarchical RCU implementation.
  217. <6> RCU dyntick-idle grace-period acceleration is enabled.
  218. <6> Additional per-CPU info printed with stalls.
  219. <6>NR_IRQS:192
  220. <6>Architected local timer running at 24.00MHz.
  221. <6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  222. <2>start_kernel(): bug: interrupts were enabled early
  223. <6>Console: colour dummy device 80x30
  224. <6>console [tty1] enabled
  225. <6>Calibrating delay loop... <c>1816.98 BogoMIPS (lpj=9084928)
  226. <6>pid_max: default: 32768 minimum: 301
  227. <6>Mount-cache hash table entries: 512
  228. <6>Initializing cgroup subsys cpuacct
  229. <6>Initializing cgroup subsys memory
  230. <6>Initializing cgroup subsys devices
  231. <6>Initializing cgroup subsys freezer
  232. <6>Initializing cgroup subsys blkio
  233. <6>Initializing cgroup subsys perf_event
  234. <6>CPU: Testing write buffer coherency: ok
  235. <6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  236. <6>hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  237. <6>Setting up static identity map for 0x40724a18 - 0x40724a70
  238. CPU1: Booted secondary processor
  239. <6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  240. <6>Brought up 2 CPUs
  241. <6>SMP: Total of 2 processors activated (3640.52 BogoMIPS).
  242. <6>devtmpfs: initialized
  243. <6>dummy:
  244. <6>NET: Registered protocol family 16
  245. <6>DMA: preallocated 256 KiB pool for atomic coherent allocations
  246. <6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  247. <6>hw-breakpoint: maximum watchpoint size is 8 bytes.
  248. <6>[ccu-inf] aw clock manager init
  249. <6>[ccu-inf] aw_ccu_init
  250. <6>[ccu-inf] script config pll3 to 297MHz
  251. <6>[ccu-inf] script config pll4 to 300MHz
  252. <6>[ccu-inf] script config pll6 to 600MHz
  253. <6>[ccu-inf] script config pll7 to 297MHz
  254. <6>[ccu-inf] script config pll8 to 336MHz
  255. <6>Init eGon pin module V2.0
  256. <6>bio: create slab <bio-0> at 0
  257. <6>sunxi_gpio driver init ver 1.3
  258. <6>gpiochip_add: registered GPIOs 1 to 51 on device: A1X_GPIO
  259. <5>SCSI subsystem initialized
  260. <7>libata version 3.00 loaded.
  261. <6>usbcore: registered new interface driver usbfs
  262. <6>usbcore: registered new interface driver hub
  263. <6>usbcore: registered new device driver usb
  264. <6>Linux media interface: v0.10
  265. <6>Linux video capture interface: v2.00
  266. <6>Advanced Linux Sound Architecture Driver Version 1.0.25.
  267. <6>Switching to clocksource arch_sys_counter
  268. <5>FS-Cache: Loaded
  269. <6>CacheFiles: Loaded
  270. <6>cfg80211: Calling CRDA to update world regulatory domain
  271. [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_OTG
  272. [sw_hcd0]: usb host driver initialize........
  273. [sw_udc]: udc_init: version 20080411
  274. [sw_udc]: usb_vbase = 0xf1c13000
  275. [sw_udc]: sram_vbase = 0xf1c00000
  276. [sw_udc]: open_usb_clock
  277. udc->driver is null, udc is need not stop
  278. <6>NET: Registered protocol family 2
  279. <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  280. <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  281. <6>TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  282. <6>TCP: Hash tables configured (established 131072 bind 65536)
  283. <6>TCP: reno registered
  284. <6>UDP hash table entries: 512 (order: 2, 16384 bytes)
  285. <6>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  286. <6>NET: Registered protocol family 1
  287. <6>RPC: Registered named UNIX socket transport module.
  288. <6>RPC: Registered udp transport module.
  289. <6>RPC: Registered tcp transport module.
  290. <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
  291. <6>audit: initializing netlink socket (disabled)
  292. <5>type=2000 audit(0.550:1): initialized
  293. highmem bounce pool size: 64 pages
  294. <5>VFS: Disk quotas dquot_6.5.2
  295. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  296. <6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
  297. <5>NFS: Registering the id_resolver key type
  298. <6>NTFS driver 2.1.30 [Flags: R/W].
  299. <6>fuse init (API version 7.18)
  300. <6>JFS: nTxBlock = 6981, nTxLock = 55850
  301. <6>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
  302. <6>Btrfs loaded
  303. <6>msgmni has been set to 1217
  304. <6>alg: No test for stdrng (krng)
  305. <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  306. <6>io scheduler noop registered
  307. <6>io scheduler deadline registered
  308. <6>io scheduler cfq registered (default)
  309. <6>sunxi disp driver loaded (/dev/disp api 1.0)
  310. <6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  311. <6>[uart]: used uart info.: 0x05
  312. <6>[uart]: serial probe 0 irq 33 mapbase 0x01c28000
  313. <6>sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
  314. <6>console [ttyS0] enabled
  315. <6>[uart]: serial probe 2 irq 35 mapbase 0x01c28800
  316. <6>sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
  317. <7>G2D: drv_g2d_init
  318. <6>G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
  319. <6>G2D: head:c9000000,tail:ca000000
  320. <6>G2D: Module initialized.major:250
  321. <6>brd: module loaded
  322. <6>loop: module loaded
  323. [NAND] nand driver version: 0x2 0x9
  324. <4>Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
  325. <4>Dev Sunxi softw311 nand magic does not match for MBR 2: ????????
  326. <4>Dev Sunxi softw311 nand magic does not match for MBR 3: ????????
  327. <4>Dev Sunxi softw311 nand magic does not match for MBR 4: ????????
  328. <4>Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
  329. <4>Dev Sunxi softw411 nand: part 1, start 65536, size 65536
  330. <4>Dev Sunxi softw411 nand: part 2, start 131072, size 7389184
  331. <6> nand: nand1 nand2
  332. [NAND]nand driver, ok.
  333. <6>sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  334. <4>sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  335. <6>sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  336. <6>sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  337. <6>scsi0 : sw_ahci_platform
  338. <6>ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
  339. <6>[spi-inf] Found 2 spi devices in config files
  340. <6>[spi-inf] boards num modalias max_spd_hz bus_num cs mode
  341. <6>[spi-inf] spi_board0 irq gpio not used
  342. <6>[spi-inf] 0 spidev 12000000 0 0 0x3
  343. <6>[spi-inf] spi_board1 irq gpio not used
  344. <6>[spi-inf] 1 spidev 12000000 2 0 0x0
  345. <6>[spi-inf] sun7i_spi_probe: sun7i spi probe<6>[spi-inf] sun7i_spi_probe: spi0 dma type: normal
  346. <6>[spi-inf] bus num = 0, spi used = 1
  347. <6>[spi-inf] sun7i_spi_probe: spi0 cs bitmap: 0x1
  348. <6>[spi-inf] sun7i_spi_set_mclk: spi0 source = sdram_pll_p, src_clk = 408000000, mclk 81600000
  349. <6>sun7i-spi sun7i-spi.0: master is unqueued, this is deprecated
  350. <6>[spi-inf] sun7i_spi_setup: enter, bpw: 8, mshz: 12000000, mode: 3
  351. <6>[spi-inf] sun7i_spi_probe: reuuimlla's SoC SPI Driver loaded for Bus SPI0 with 2 Slaves at most
  352. <6>[spi-inf] sun7i_spi_probe: spi0 driver probe succeed, base f0518000, irq 42, dma_id_rx 24, dma_id_tx 24
  353. <6>[spi-inf] sun7i_spi_probe: sun7i spi probe<6>[spi-inf] sun7i_spi_probe: spi2 dma type: normal
  354. <6>[spi-inf] bus num = 2, spi used = 1
  355. <6>[spi-inf] sun7i_spi_probe: spi2 cs bitmap: 0x1
  356. <6>[spi-inf] sun7i_spi_set_mclk: spi2 source = sdram_pll_p, src_clk = 408000000, mclk 81600000
  357. <6>sun7i-spi sun7i-spi.2: master is unqueued, this is deprecated
  358. <6>[spi-inf] sun7i_spi_setup: enter, bpw: 8, mshz: 12000000, mode: 0
  359. <6>[spi-inf] sun7i_spi_probe: reuuimlla's SoC SPI Driver loaded for Bus SPI2 with 2 Slaves at most
  360. <6>[spi-inf] sun7i_spi_probe: spi2 driver probe succeed, base f051a000, irq 44, dma_id_rx 26, dma_id_tx 26
  361. <6>bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
  362. <6>Fixed MDIO Bus: probed
  363. <4>emac_init fetch emac using configuration failed
  364. <6>emac driver is disabled
  365. <6>gmac: use mac address from chipid
  366. <6>gmac: device MAC address 02:8d:08:c1:22:76
  367. [gmac]: sun6i_gmac platform driver registration completed
  368. <6>PPP generic driver version 2.4.2
  369. <6>PPP BSD Compression module registered
  370. <6>PPP Deflate Compression module registered
  371. <6>PPP MPPE Compression module registered
  372. <6>NET: Registered protocol family 24
  373. <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  374. <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  375. [sw-ehci1]: open clock
  376. [sw-ehci1]: Set USB Power ON
  377. <6>sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  378. <6>sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
  379. <6>sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
  380. <6>sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  381. <6>hub 1-0:1.0: USB hub found
  382. <6>hub 1-0:1.0: 1 port detected
  383. [sw-ohci1]: open clock
  384. <6>sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  385. <6>sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  386. <6>sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
  387. <6>hub 2-0:1.0: USB hub found
  388. <6>hub 2-0:1.0: 1 port detected
  389. [sw-ehci2]: open clock
  390. [sw-ehci2]: Set USB Power ON
  391. <6>sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  392. <6>sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
  393. <6>sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
  394. <6>sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
  395. <6>hub 3-0:1.0: USB hub found
  396. <6>hub 3-0:1.0: 1 port detected
  397. [sw-ohci2]: open clock
  398. <6>sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  399. <6>sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
  400. <6>sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
  401. <6>hub 4-0:1.0: USB hub found
  402. <6>hub 4-0:1.0: 1 port detected
  403. <6>Initializing USB Mass Storage driver...
  404. <6>usbcore: registered new interface driver usb-storage
  405. <6>USB Mass Storage support registered.
  406. <6>usbcore: registered new interface driver ums-alauda
  407. <6>usbcore: registered new interface driver ums-cypress
  408. <6>usbcore: registered new interface driver ums-datafab
  409. <6>usbcore: registered new interface driver ums_eneub6250
  410. <6>usbcore: registered new interface driver ums-freecom
  411. <6>usbcore: registered new interface driver ums-isd200
  412. <6>usbcore: registered new interface driver ums-jumpshot
  413. <6>usbcore: registered new interface driver ums-karma
  414. <6>usbcore: registered new interface driver ums-onetouch
  415. <6>usbcore: registered new interface driver ums-realtek
  416. <6>usbcore: registered new interface driver ums-sddr09
  417. <6>usbcore: registered new interface driver ums-sddr55
  418. <6>usbcore: registered new interface driver ums-usbat
  419. <6>mousedev: PS/2 mouse device common for all mice
  420. ===========================hv_keypad_init=====================
  421. ========HV Inital ===================
  422. <3>tkey_fetch_sysconfig_para: tkey_unused.
  423. hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0
  424. <3>sunxi-rtc sunxi-rtc: Warning: RTC time is wrong!
  425. <6>sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  426. <6>i2c /dev entries driver
  427. config i2c gpio with gpio_config api
  428. <6>axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  429. <6>axp_mfd 0-0034: AXP internal temperature monitoring enabled
  430. <4>i2c i2c-0: Invalid probe address 0x00
  431. <6>I2C: i2c-0: AW16XX I2C adapter
  432. config i2c gpio with gpio_config api
  433. <4>i2c i2c-1: Invalid probe address 0x00
  434. <6>I2C: i2c-1: AW16XX I2C adapter
  435. config i2c gpio with gpio_config api
  436. <4>i2c i2c-2: Invalid probe address 0x00
  437. <6>I2C: i2c-2: AW16XX I2C adapter
  438. [cedar dev]: install start!!!
  439. [cedar dev]: install end!!!
  440. [tt]----- avs_dev driver load... ----
  441. [tt]----- register iomem ----
  442. Cannot reserve region for ccmu
  443. [tt]--- avs_dev driver load ok!! -----
  444. [ace_drv] start!!!
  445. [ace_drv] init end!!!
  446. [pa_drv] start!!!
  447. [pa_drv] init end!!!
  448. <6>axp20_ldo1: 1300 mV
  449. <6>axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  450. <6>axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  451. <6>axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  452. <6>axp20_buck2: 700 <--> 2275 mV at 1450 mV
  453. <3>somebody is trying to set dcdc3 range to (1300000, 1300000) uV
  454. <3>but we keep dcdc3 = 1250000 uV from the bootloader
  455. <6>axp20_buck3: 700 <--> 3500 mV at 1250 mV
  456. <6>axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  457. <6>input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
  458. <4>axp20_ldo2: Failed to create debugfs directory
  459. incomplete xfer (0x20)
  460. incomplete xfer (0x20)
  461. incomplete xfer (0x20)
  462. incomplete xfer (0x20)
  463. incomplete xfer (0x20)
  464. incomplete xfer (0x20)
  465. incomplete xfer (0x20)
  466. incomplete xfer (0x20)
  467. incomplete xfer (0x20)
  468. incomplete xfer (0x20)
  469. incomplete xfer (0x20)
  470. incomplete xfer (0x20)
  471. incomplete xfer (0x20)
  472. incomplete xfer (0x20)
  473. incomplete xfer (0x20)
  474. incomplete xfer (0x20)
  475. incomplete xfer (0x20)
  476. incomplete xfer (0x20)
  477. incomplete xfer (0x20)
  478. incomplete xfer (0x20)
  479. incomplete xfer (0x20)
  480. incomplete xfer (0x20)
  481. incomplete xfer (0x20)
  482. incomplete xfer (0x20)
  483. incomplete xfer (0x20)
  484. incomplete xfer (0x20)
  485. incomplete xfer (0x20)
  486. <6>device-mapper: uevent: version 1.0.3
  487. <6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
  488. <6>device-mapper: multipath: version 1.3.2 loaded
  489. <6>device-mapper: multipath round-robin: version 1.0.0 loaded
  490. <6>device-mapper: multipath queue-length: version 0.1.0 loaded
  491. <6>device-mapper: multipath service-time: version 0.2.0 loaded
  492. <6>cpuidle: using governor ladder
  493. <6>cpuidle: using governor menu
  494. <6>[mmc-msg] sw_mci_init
  495. <6>[mmc-msg] MMC host used card: 0x1, boot card: 0x0, io_card 0
  496. <6>[mmc-msg] sdc0 set round clock 400000, src 24000000
  497. <6>[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  498. <6>[mmc-msg] sdc0 Probe: base:0xf0570000 irq:64 sg_cpu:f0572000(4fc00000) ret 0.
  499. [mmc_pm]: failed to fetch sdio card configuration!
  500. <6>sunxi_leds driver init
  501. <6>sunxi leds can't find script data '[leds_para]' 'leds_used'
  502. <6>ledtrig-cpu: registered to indicate activity on CPUs
  503. <6>usbcore: registered new interface driver usbhid
  504. <6>usbhid: USB HID core driver
  505. <6>ashmem: initialized
  506. <6>logger: created 256K log 'log_main'
  507. <6>logger: created 256K log 'log_events'
  508. <6>logger: created 256K log 'log_radio'
  509. <6>logger: created 256K log 'log_system'
  510. [SPDIF] [spdif_para] isn't defined or spdif_used=0
  511. [I2S-0] Entered sunxi_i2s_init
  512. [I2S-0] sunxi-i2s cannot find any using configuration for controllers, return directly!
  513. [I2S-0] sndi2s cannot find any using configuration for controllers, return directly!
  514. [I2S-0] Entered sunxi_sndi2s_init
  515. <6>IPv4 over IPv4 tunneling driver
  516. <6>TCP: bic registered
  517. <6>TCP: cubic registered
  518. <6>TCP: westwood registered
  519. <6>TCP: highspeed registered
  520. <6>TCP: hybla registered
  521. <6>TCP: htcp registered
  522. <6>TCP: vegas registered
  523. <6>TCP: veno registered
  524. <6>TCP: scalable registered
  525. <6>TCP: lp registered
  526. <6>TCP: yeah registered
  527. <6>TCP: illinois registered
  528. <6>Initializing XFRM netlink socket
  529. <6>NET: Registered protocol family 10
  530. <6>NET: Registered protocol family 17
  531. <6>NET: Registered protocol family 15
  532. [mmc_pm]: No sdio card, please check your config !!
  533. <5>Registering the dns_resolver key type
  534. <6>VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
  535. <5>Registering SWP/SWPB emulation handler
  536. <4>axp20_buck2: Failed to create debugfs directory
  537. <6>[cpu_freq] INF:-------------------V-F Table-------------------
  538. <6>[cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
  539. <6>[cpu_freq] INF: voltage = 1425mv frequency = 912MHz
  540. <6>[cpu_freq] INF: voltage = 1350mv frequency = 864MHz
  541. <6>[cpu_freq] INF: voltage = 1250mv frequency = 720MHz
  542. <6>[cpu_freq] INF: voltage = 1150mv frequency = 528MHz
  543. <6>[cpu_freq] INF: voltage = 1100mv frequency = 312MHz
  544. <6>[cpu_freq] INF: voltage = 1050mv frequency = 144MHz
  545. <6>[cpu_freq] INF: voltage = 1000mv frequency = 0MHz
  546. <6>[cpu_freq] INF:-----------------------------------------------
  547. <6>[cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 720MHz
  548. <6>registered taskstats version 1
  549. <4>[DISP] Invalid mode string: 0, ignoring
  550. <6>I2C: i2c-3: HDMI I2C adapter
  551. <6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  552. <6>ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
  553. <6>ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  554. <6>ata1.00: configured for UDMA/133
  555. <5>scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500JI 2AC1 PQ: 0 ANSI: 5
  556. <5>sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  557. <5>sd 0:0:0:0: [sda] Write Protect is off
  558. <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  559. <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  560. <6> sda: sda1 sda2
  561. <5>sd 0:0:0:0: [sda] Attached SCSI disk
  562. <4>Timeout waiting for EDID info
  563. <6>disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
  564. <6>Console: switching to colour frame buffer device 160x45
  565. <4>axp20_buck3: incomplete constraints, leaving on
  566. <4>axp20_buck2: incomplete constraints, leaving on
  567. <4>axp20_ldo4: incomplete constraints, leaving on
  568. <4>axp20_ldo3: incomplete constraints, leaving on
  569. <4>axp20_ldo2: incomplete constraints, leaving on
  570. <4>axp20_ldo1: incomplete constraints, leaving on
  571. <6>console [netcon0] enabled
  572. <6>netconsole: network logging started
  573. <3>otg_wakelock_init: No USB transceiver found
  574. <6>ALSA device list:
  575. <6> #0: sunxi-CODEC Audio Codec
  576. <3>EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
  577. <3>EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
  578. <6>EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts: (null)
  579. <6>VFS: Mounted root (ext4 filesystem) on device 8:2.
  580. <6>devtmpfs: mounted
  581. <6>Freeing init memory: 224K
  582. <30>systemd[1]: System time before build time, advancing clock.
  583. <30>systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  584. <30>systemd[1]: Detected architecture arm.
  585. <30>systemd[1]: Set hostname to <pcduino3nano>.
  586. <30>systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  587. <30>systemd[1]: Listening on Journal Socket.
  588. <30>systemd[1]: Listening on Syslog Socket.
  589. <30>systemd[1]: Listening on Journal Socket (/dev/log).
  590. <30>systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  591. <30>systemd[1]: Created slice System Slice.
  592. <30>systemd[1]: Mounting Debug File System...
  593. <30>systemd[1]: Created slice User and Session Slice.
  594. <30>systemd[1]: Reached target Slices.
  595. <30>systemd[1]: Reached target Remote File Systems (Pre).
  596. <30>systemd[1]: Listening on fsck to fsckd communication Socket.
  597. <30>systemd[1]: Listening on Journal Audit Socket.
  598. <30>systemd[1]: Starting Create list of required static device nodes for the current kernel...
  599. <30>systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  600. <30>systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  601. <30>systemd[1]: Reached target Encrypted Volumes.
  602. <30>systemd[1]: Listening on udev Control Socket.
  603. <30>systemd[1]: Created slice system-getty.slice.
  604. <30>systemd[1]: Starting Nameserver information manager...
  605. <30>systemd[1]: Starting Load Kernel Modules...
  606. <30>systemd[1]: Created slice system-serial\x2dgetty.slice.
  607. <30>systemd[1]: Starting Restore / save the current clock...
  608. <30>systemd[1]: Reached target Remote File Systems.
  609. <30>systemd[1]: Starting Remount Root and Kernel File Systems...
  610. <30>systemd[1]: Listening on udev Kernel Socket.
  611. <30>systemd[1]: Mounting POSIX Message Queue File System...
  612. <30>systemd[1]: Mounted Debug File System.
  613. <30>systemd[1]: Mounted POSIX Message Queue File System.
  614. <30>systemd[1]: Started Create list of required static device nodes for the current kernel.
  615. <6>Bluetooth: Core ver 2.16
  616. <6>NET: Registered protocol family 31
  617. <6>Bluetooth: HCI device and connection manager initialized
  618. <6>Bluetooth: HCI socket layer initialized
  619. <6>Bluetooth: L2CAP socket layer initialized
  620. <6>Bluetooth: SCO socket layer initialized
  621. <6>Bluetooth: HCI UART driver ver 2.2
  622. <6>Bluetooth: HCI H4 protocol initialized
  623. <6>Bluetooth: HCI BCSP protocol initialized
  624. <30>systemd[1]: Starting Create Static Device Nodes in /dev...
  625. <6>Bluetooth: HCILL protocol initialized
  626. <6>Bluetooth: HCIATH3K protocol initialized
  627. <6>Bluetooth: RFCOMM TTY layer initialized
  628. <6>Bluetooth: RFCOMM socket layer initialized
  629. <6>Bluetooth: RFCOMM ver 1.11
  630. <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  631. <30>systemd[1]: Started Nameserver information manager.
  632. <30>systemd[1]: Started Restore / save the current clock.
  633. <30>systemd[1]: Time has been changed
  634. <6>EXT4-fs (sda2): re-mounted. Opts: commit=600,errors=remount-ro
  635. <30>systemd[1]: Started Remount Root and Kernel File Systems.
  636. <6>input: sunxi-ir as /devices/virtual/input/input1
  637. IR Initial OK
  638. <30>systemd[1]: Starting udev Coldplug all Devices...
  639. <30>systemd[1]: Activating swap /var/swap...
  640. <30>systemd[1]: Starting Load/Save Random Seed...
  641. <30>systemd[1]: Started Load Kernel Modules.
  642. <30>systemd[1]: Starting Apply Kernel Variables...
  643. <6>Adding 131068k swap on /var/swap. Priority:-1 extents:2 across:139260k
  644. <30>systemd[1]: Mounting Configuration File System...
  645. <30>systemd[1]: Mounting FUSE Control File System...
  646. <30>systemd[1]: Activated swap /var/swap.
  647. <30>systemd[1]: Mounted Configuration File System.
  648. <30>systemd[1]: Started Apply Kernel Variables.
  649. <30>systemd[1]: Started Load/Save Random Seed.
  650. <30>systemd[1]: Started udev Coldplug all Devices.
  651. <30>systemd[1]: Mounted FUSE Control File System.
  652. <30>systemd[1]: Reached target Swap.
  653. <30>systemd[1]: Started Create Static Device Nodes in /dev.
  654. <30>systemd[1]: Starting udev Kernel Device Manager...
  655. <30>systemd[1]: Reached target Local File Systems (Pre).
  656. <30>systemd[1]: Mounting /tmp...
  657. <30>systemd[1]: Mounted /tmp.
  658. <30>systemd[1]: Started Entropy daemon using the HAVEGE algorithm.
  659. <30>systemd[1]: Starting Journal Service...
  660. <30>systemd[1]: Started udev Kernel Device Manager.
  661. <30>systemd[1]: Started Journal Service.
  662. <5>sd 0:0:0:0: Attached scsi generic sg0 type 0
  663. <46>systemd-journald[135]: Received request to flush runtime journal from PID 1
  664. <6>sunxi_gmac: probed
  665. <6>eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
  666. <6>eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
  667. <6>PHY: sunxi_gmac-0:00 - Link is Up<c> - 1000/Full<c>
  668.  
  669. Ubuntu 16.04 LTS pcduino3nano ttyS0
  670.  
  671. pcduino3nano login: <7>eth0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!