API tools faq
paste
Guest User

OpenELEC /var/log/messages log

a guest
Mar 2nd, 2013
190
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 202.25 KB | None | 0 0
raw download clone embed print report
  1. ################################################################################
  2. # ... output of cat /var/log/messages.0
  3. # OpenELEC release: Intel.x86_64-2.99.3
  4. #
  5. ################################################################################
  6. Mar 1 23:36:00 openelec syslog.info syslogd started: BusyBox v1.21.0
  7. Mar 1 23:36:00 openelec user.notice Boot: ### Setup some CDROM settings ###
  8. Mar 1 23:36:00 openelec user.notice Boot: ### Starting Kernellog daemon ###
  9. Mar 1 23:36:00 openelec user.notice kernel: klogd started: BusyBox v1.21.0 (2013-02-20 20:54:11 CET)
  10. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] Initializing cgroup subsys cpuset
  11. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] Initializing cgroup subsys cpu
  12. Mar 1 23:36:00 openelec user.notice kernel: [ 0.000000] Linux version 3.7.9 (jetstream@1801-lin007) (gcc version 4.7.2 (GCC) ) #1 SMP Wed Feb 20 20:53:23 CET 2013
  13. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] Command line: boot=LABEL=System disk=LABEL=Storage quiet BOOT_IMAGE=/KERNEL
  14. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] KERNEL supported cpus:
  15. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] Intel GenuineIntel
  16. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] e820: BIOS-provided physical RAM map:
  17. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
  18. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
  19. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
  20. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c0f3ffff] usable
  21. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] BIOS-e820: [mem 0x00000000c0f40000-0x00000000c0f82fff] ACPI NVS
  22. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] BIOS-e820: [mem 0x00000000c0f83000-0x00000000c0fbffff] ACPI data
  23. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] BIOS-e820: [mem 0x00000000c0fc0000-0x00000000c0ffffff] reserved
  24. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
  25. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
  26. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
  27. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] NX (Execute Disable) protection: active
  28. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] SMBIOS 2.4 present.
  29. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] DMI: Gigabyte Technology Co., Ltd. H61N-USB3/H61N-USB3, BIOS F8 05/15/2012
  30. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
  31. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  32. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
  33. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] MTRR default type: uncachable
  34. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] MTRR fixed ranges enabled:
  35. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] 00000-9FFFF write-back
  36. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] A0000-BFFFF uncachable
  37. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] C0000-D0FFF write-protect
  38. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] D1000-EFFFF uncachable
  39. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] F0000-FFFFF write-through
  40. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] MTRR variable ranges enabled:
  41. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] 0 base 000000000 mask F00000000 write-back
  42. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
  43. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
  44. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] 3 base 0C8000000 mask FF8000000 uncachable
  45. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] 4 base 0C4000000 mask FFC000000 uncachable
  46. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] 5 base 0C2000000 mask FFE000000 uncachable
  47. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] 6 base 0C1800000 mask FFF800000 uncachable
  48. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] 7 base 100000000 mask F00000000 write-back
  49. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] 8 base 200000000 mask FE0000000 write-back
  50. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] 9 disabled
  51. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  52. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] e820: update [mem 0xc1800000-0xffffffff] usable ==> reserved
  53. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] e820: last_pfn = 0xc0f40 max_arch_pfn = 0x400000000
  54. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] found SMP MP-table at [mem 0x000f57a0-0x000f57af] mapped at [ffff8800000f57a0]
  55. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
  56. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
  57. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] init_memory_mapping: [mem 0x00000000-0xc0f3ffff]
  58. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] [mem 0x00000000-0xc0dfffff] page 2M
  59. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] [mem 0xc0e00000-0xc0f3ffff] page 4k
  60. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] kernel direct mapping tables up to 0xc0f3ffff @ [mem 0x1fffa000-0x1fffffff]
  61. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] init_memory_mapping: [mem 0x100000000-0x21fdfffff]
  62. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] [mem 0x100000000-0x21fdfffff] page 2M
  63. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] kernel direct mapping tables up to 0x21fdfffff @ [mem 0xc0f3a000-0xc0f3ffff]
  64. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] ACPI: RSDP 00000000000f7390 00014 (v00 GBT )
  65. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] ACPI: RSDT 00000000c0f83040 00050 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
  66. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] ACPI: FACP 00000000c0f83100 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
  67. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] ACPI: DSDT 00000000c0f831c0 046E7 (v01 GBT GBTUACPI 00001000 MSFT 04000000)
  68. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] ACPI: FACS 00000000c0f40000 00040
  69. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] ACPI: MSDM 00000000c0f87a00 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
  70. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] ACPI: HPET 00000000c0f87ac0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
  71. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] ACPI: MCFG 00000000c0f87b40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
  72. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] ACPI: ASPT 00000000c0f87c00 00034 (v07 GBT PerfTune 312E3042 UTBG 01010101)
  73. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] ACPI: SSPT 00000000c0f87c40 0230C (v01 GBT SsptHead 312E3042 UTBG 01010101)
  74. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] ACPI: MATS 00000000c0f89f50 00034 (v01 GBT 00000000 00000000)
  75. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] ACPI: TAMG 00000000c0f89fb0 0054A (v01 GBT GBT B0 5455312E BG?? 53450101)
  76. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] ACPI: APIC 00000000c0f87900 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
  77. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] ACPI: SSDT 00000000c0f8a500 01EC8 (v01 INTEL PPM RCM 80000001 INTL 20061109)
  78. Mar 1 23:36:00 openelec user.notice Boot: ### starting udev daemon ###
  79. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] ACPI: MATS 00000000c0f8c400 095D0 (v01 MATS RCM 80000001 INTL 20061109)
  80. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
  81. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217a00000-ffff88021e5fffff] on node 0
  82. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] Zone ranges:
  83. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
  84. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
  85. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] Normal [mem 0x100000000-0x21fdfffff]
  86. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] Movable zone start for each node
  87. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] Early memory node ranges
  88. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
  89. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] node 0: [mem 0x00100000-0xc0f3ffff]
  90. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] node 0: [mem 0x100000000-0x21fdfffff]
  91. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] On node 0 totalpages: 1969357
  92. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] DMA zone: 56 pages used for memmap
  93. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] DMA zone: 6 pages reserved
  94. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] DMA zone: 3919 pages, LIFO batch:0
  95. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] DMA32 zone: 14280 pages used for memmap
  96. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] DMA32 zone: 771960 pages, LIFO batch:31
  97. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] Normal zone: 16121 pages used for memmap
  98. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] Normal zone: 1163015 pages, LIFO batch:31
  99. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
  100. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
  101. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  102. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
  103. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  104. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
  105. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
  106. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
  107. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
  108. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
  109. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
  110. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
  111. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
  112. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
  113. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
  114. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
  115. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
  116. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
  117. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  118. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  119. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  120. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  121. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] ACPI: IRQ0 used by override.
  122. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] ACPI: IRQ2 used by override.
  123. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] ACPI: IRQ9 used by override.
  124. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
  125. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  126. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
  127. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] nr_irqs_gsi: 40
  128. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] e820: [mem 0xc1000000-0xf3ffffff] available for PCI devices
  129. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
  130. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88021fa00000 s72896 r8192 d21312 u262144
  131. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] pcpu-alloc: s72896 r8192 d21312 u262144 alloc=1*2097152
  132. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
  133. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1938894
  134. Mar 1 23:36:00 openelec user.notice kernel: [ 0.000000] Kernel command line: fastboot root=/dev/ram0 rdinit=/init threadirqs boot=LABEL=System disk=LABEL=Storage quiet BOOT_IMAGE=/KERNEL
  135. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  136. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  137. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  138. Mar 1 23:36:00 openelec user.notice kernel: [ 0.000000] __ex_table already sorted, skipping sort
  139. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
  140. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] Memory: 7671904k/8910848k available (5942k kernel code, 1033420k absent, 205524k reserved, 4810k data, 4392k init)
  141. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] Hierarchical RCU implementation.
  142. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
  143. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  144. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
  145. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] Console: colour VGA+ 80x25
  146. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] console [tty0] enabled
  147. Mar 1 23:36:00 openelec user.debug kernel: [ 0.000000] hpet clockevent registered
  148. Mar 1 23:36:00 openelec user.info kernel: [ 0.000000] tsc: Fast TSC calibration using PIT
  149. Mar 1 23:36:00 openelec user.info kernel: [ 0.003333] tsc: Detected 3292.542 MHz processor
  150. Mar 1 23:36:00 openelec user.info kernel: [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6587.46 BogoMIPS (lpj=10975140)
  151. Mar 1 23:36:00 openelec user.info kernel: [ 0.000003] pid_max: default: 32768 minimum: 301
  152. Mar 1 23:36:00 openelec user.info kernel: [ 0.000026] Mount-cache hash table entries: 256
  153. Mar 1 23:36:00 openelec user.info kernel: [ 0.000124] Initializing cgroup subsys cpuacct
  154. Mar 1 23:36:00 openelec user.info kernel: [ 0.000126] Initializing cgroup subsys freezer
  155. Mar 1 23:36:00 openelec user.info kernel: [ 0.000139] CPU: Physical Processor ID: 0
  156. Mar 1 23:36:00 openelec user.info kernel: [ 0.000140] CPU: Processor Core ID: 0
  157. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000143] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
  158. Mar 1 23:36:00 openelec user.warn kernel: [ 0.000143] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  159. Mar 1 23:36:00 openelec user.info kernel: [ 0.000146] process: using mwait in idle threads
  160. Mar 1 23:36:00 openelec user.info kernel: [ 0.000148] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
  161. Mar 1 23:36:00 openelec user.info kernel: [ 0.000148] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
  162. Mar 1 23:36:00 openelec user.info kernel: [ 0.000148] tlb_flushall_shift: 1
  163. Mar 1 23:36:00 openelec user.info kernel: [ 0.000229] Freeing SMP alternatives: 16k freed
  164. Mar 1 23:36:00 openelec user.info kernel: [ 0.000235] ACPI: Core revision 20120913
  165. Mar 1 23:36:00 openelec user.info kernel: [ 0.006238] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  166. Mar 1 23:36:00 openelec user.info kernel: [ 0.039240] smpboot: CPU0: Intel(R) Core(TM) i3-3225 CPU @ 3.30GHz (fam: 06, model: 3a, stepping: 09)
  167. Mar 1 23:36:00 openelec user.info kernel: [ 0.143250] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
  168. Mar 1 23:36:00 openelec user.info kernel: [ 0.143254] ... version: 3
  169. Mar 1 23:36:00 openelec user.info kernel: [ 0.143255] ... bit width: 48
  170. Mar 1 23:36:00 openelec user.info kernel: [ 0.143256] ... generic registers: 4
  171. Mar 1 23:36:00 openelec user.info kernel: [ 0.143257] ... value mask: 0000ffffffffffff
  172. Mar 1 23:36:00 openelec user.info kernel: [ 0.143257] ... max period: 000000007fffffff
  173. Mar 1 23:36:00 openelec user.info kernel: [ 0.143258] ... fixed-purpose events: 3
  174. Mar 1 23:36:00 openelec user.info kernel: [ 0.143259] ... event mask: 000000070000000f
  175. Mar 1 23:36:00 openelec user.info kernel: [ 0.143394] smpboot: Booting Node 0, Processors #1 #2 #3
  176. Mar 1 23:36:00 openelec user.info kernel: [ 0.183180] Brought up 4 CPUs
  177. Mar 1 23:36:00 openelec user.info kernel: [ 0.183183] smpboot: Total of 4 processors activated (26350.85 BogoMIPS)
  178. Mar 1 23:36:00 openelec user.info kernel: [ 0.185191] devtmpfs: initialized
  179. Mar 1 23:36:00 openelec user.info kernel: [ 0.185410] PM: Registering ACPI NVS region [mem 0xc0f40000-0xc0f82fff] (274432 bytes)
  180. Mar 1 23:36:00 openelec user.info kernel: [ 0.185463] NET: Registered protocol family 16
  181. Mar 1 23:36:00 openelec user.info kernel: [ 0.185643] ACPI: bus type pci registered
  182. Mar 1 23:36:00 openelec user.info kernel: [ 0.185669] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
  183. Mar 1 23:36:00 openelec user.info kernel: [ 0.185671] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
  184. Mar 1 23:36:00 openelec user.info kernel: [ 0.187285] PCI: Using configuration type 1 for base access
  185. Mar 1 23:36:00 openelec user.warn kernel: [ 0.187405] mtrr: your CPUs had inconsistent fixed MTRR settings
  186. Mar 1 23:36:00 openelec user.info kernel: [ 0.187406] mtrr: probably your BIOS does not setup all CPUs.
  187. Mar 1 23:36:00 openelec user.info kernel: [ 0.187407] mtrr: corrected configuration.
  188. Mar 1 23:36:00 openelec user.info kernel: [ 0.188091] bio: create slab <bio-0> at 0
  189. Mar 1 23:36:00 openelec user.info kernel: [ 0.188131] ACPI: Added _OSI(Module Device)
  190. Mar 1 23:36:00 openelec user.info kernel: [ 0.188132] ACPI: Added _OSI(Processor Device)
  191. Mar 1 23:36:00 openelec user.info kernel: [ 0.188133] ACPI: Added _OSI(3.0 _SCP Extensions)
  192. Mar 1 23:36:00 openelec user.info kernel: [ 0.188134] ACPI: Added _OSI(Processor Aggregator Device)
  193. Mar 1 23:36:00 openelec user.debug kernel: [ 0.188528] ACPI: EC: Look up EC in DSDT
  194. Mar 1 23:36:00 openelec user.warn kernel: [ 0.190658] ACPI BIOS Bug: Warning: Incorrect checksum in table [TAMG] - 0xFD, should be 0xFC (20120913/tbutils-324)
  195. Mar 1 23:36:00 openelec user.info kernel: [ 0.190982] ACPI: Interpreter enabled
  196. Mar 1 23:36:00 openelec user.info kernel: [ 0.190986] ACPI: (supports S0 S3 S5)
  197. Mar 1 23:36:00 openelec user.info kernel: [ 0.190992] ACPI: Using IOAPIC for interrupt routing
  198. Mar 1 23:36:00 openelec user.info kernel: [ 0.192602] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  199. Mar 1 23:36:00 openelec user.info kernel: [ 0.192631] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
  200. Mar 1 23:36:00 openelec user.info kernel: [ 0.192680] PCI host bridge to bus 0000:00
  201. Mar 1 23:36:00 openelec user.info kernel: [ 0.192682] pci_bus 0000:00: root bus resource [bus 00-3f]
  202. Mar 1 23:36:00 openelec user.info kernel: [ 0.192683] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
  203. Mar 1 23:36:00 openelec user.info kernel: [ 0.192685] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
  204. Mar 1 23:36:00 openelec user.info kernel: [ 0.192687] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
  205. Mar 1 23:36:00 openelec user.info kernel: [ 0.192688] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
  206. Mar 1 23:36:00 openelec user.info kernel: [ 0.192689] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
  207. Mar 1 23:36:00 openelec user.info kernel: [ 0.192691] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff]
  208. Mar 1 23:36:00 openelec user.debug kernel: [ 0.192697] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
  209. Mar 1 23:36:00 openelec user.debug kernel: [ 0.192722] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000
  210. Mar 1 23:36:00 openelec user.debug kernel: [ 0.192731] pci 0000:00:02.0: reg 10: [mem 0xfb800000-0xfbbfffff 64bit]
  211. Mar 1 23:36:00 openelec user.debug kernel: [ 0.192736] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
  212. Mar 1 23:36:00 openelec user.debug kernel: [ 0.192740] pci 0000:00:02.0: reg 20: [io 0xff00-0xff3f]
  213. Mar 1 23:36:00 openelec user.debug kernel: [ 0.192783] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
  214. Mar 1 23:36:00 openelec user.debug kernel: [ 0.192804] pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit]
  215. Mar 1 23:36:00 openelec user.debug kernel: [ 0.192873] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
  216. Mar 1 23:36:00 openelec user.debug kernel: [ 0.192903] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
  217. Mar 1 23:36:00 openelec user.debug kernel: [ 0.192921] pci 0000:00:1a.0: reg 10: [mem 0xfbffe000-0xfbffe3ff]
  218. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193005] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
  219. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193028] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
  220. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193041] pci 0000:00:1b.0: reg 10: [mem 0xfbff4000-0xfbff7fff 64bit]
  221. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193102] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  222. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193120] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
  223. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193192] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  224. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193213] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
  225. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193287] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  226. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193317] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
  227. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193336] pci 0000:00:1d.0: reg 10: [mem 0xfbffd000-0xfbffd3ff]
  228. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193419] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  229. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193437] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
  230. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193493] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
  231. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193608] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
  232. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193624] pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07]
  233. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193630] pci 0000:00:1f.2: reg 14: [io 0xfd00-0xfd03]
  234. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193637] pci 0000:00:1f.2: reg 18: [io 0xfc00-0xfc07]
  235. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193643] pci 0000:00:1f.2: reg 1c: [io 0xfb00-0xfb03]
  236. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193650] pci 0000:00:1f.2: reg 20: [io 0xfa00-0xfa1f]
  237. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193656] pci 0000:00:1f.2: reg 24: [mem 0xfbffc000-0xfbffc7ff]
  238. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193696] pci 0000:00:1f.2: PME# supported from D3hot
  239. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193711] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
  240. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193724] pci 0000:00:1f.3: reg 10: [mem 0xfbffb000-0xfbffb0ff 64bit]
  241. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193742] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
  242. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193824] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
  243. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193842] pci 0000:01:00.0: reg 10: [io 0xee00-0xeeff]
  244. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193875] pci 0000:01:00.0: reg 18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
  245. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193895] pci 0000:01:00.0: reg 20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
  246. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193982] pci 0000:01:00.0: supports D1 D2
  247. Mar 1 23:36:00 openelec user.debug kernel: [ 0.193984] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  248. Mar 1 23:36:00 openelec user.info kernel: [ 0.199929] pci 0000:00:1c.0: PCI bridge to [bus 01]
  249. Mar 1 23:36:00 openelec user.debug kernel: [ 0.199934] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
  250. Mar 1 23:36:00 openelec user.debug kernel: [ 0.199942] pci 0000:00:1c.0: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
  251. Mar 1 23:36:00 openelec user.debug kernel: [ 0.200006] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330
  252. Mar 1 23:36:00 openelec user.debug kernel: [ 0.200031] pci 0000:02:00.0: reg 10: [mem 0xfbee0000-0xfbeeffff 64bit]
  253. Mar 1 23:36:00 openelec user.debug kernel: [ 0.200050] pci 0000:02:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit]
  254. Mar 1 23:36:00 openelec user.debug kernel: [ 0.200069] pci 0000:02:00.0: reg 20: [mem 0xfbefe000-0xfbefefff 64bit]
  255. Mar 1 23:36:00 openelec user.debug kernel: [ 0.200147] pci 0000:02:00.0: supports D1
  256. Mar 1 23:36:00 openelec user.debug kernel: [ 0.200148] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
  257. Mar 1 23:36:00 openelec user.info kernel: [ 0.206621] pci 0000:00:1c.1: PCI bridge to [bus 02]
  258. Mar 1 23:36:00 openelec user.debug kernel: [ 0.206627] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
  259. Mar 1 23:36:00 openelec user.info kernel: [ 0.206685] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
  260. Mar 1 23:36:00 openelec user.debug kernel: [ 0.206693] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
  261. Mar 1 23:36:00 openelec user.debug kernel: [ 0.206694] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
  262. Mar 1 23:36:00 openelec user.debug kernel: [ 0.206695] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  263. Mar 1 23:36:00 openelec user.debug kernel: [ 0.206697] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
  264. Mar 1 23:36:00 openelec user.debug kernel: [ 0.206698] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
  265. Mar 1 23:36:00 openelec user.debug kernel: [ 0.206699] pci 0000:00:1e.0: bridge window [mem 0xdfa00000-0xfebfffff] (subtractive decode)
  266. Mar 1 23:36:00 openelec user.debug kernel: [ 0.206712] pci_bus 0000:00: on NUMA node 0
  267. Mar 1 23:36:00 openelec user.debug kernel: [ 0.206714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  268. Mar 1 23:36:00 openelec user.debug kernel: [ 0.206804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
  269. Mar 1 23:36:00 openelec user.debug kernel: [ 0.206821] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
  270. Mar 1 23:36:00 openelec user.info kernel: [ 0.206854] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
  271. Mar 1 23:36:00 openelec user.info kernel: [ 0.206856] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
  272. Mar 1 23:36:00 openelec user.info kernel: [ 0.209758] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
  273. Mar 1 23:36:00 openelec user.info kernel: [ 0.209783] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
  274. Mar 1 23:36:00 openelec user.info kernel: [ 0.209806] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
  275. Mar 1 23:36:00 openelec user.info kernel: [ 0.209829] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
  276. Mar 1 23:36:00 openelec user.info kernel: [ 0.209852] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  277. Mar 1 23:36:00 openelec user.info kernel: [ 0.209875] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  278. Mar 1 23:36:00 openelec user.info kernel: [ 0.209901] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
  279. Mar 1 23:36:00 openelec user.info kernel: [ 0.209929] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
  280. Mar 1 23:36:00 openelec user.info kernel: [ 0.209969] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  281. Mar 1 23:36:00 openelec user.info kernel: [ 0.209971] vgaarb: loaded
  282. Mar 1 23:36:00 openelec user.info kernel: [ 0.209971] vgaarb: bridge control possible 0000:00:02.0
  283. Mar 1 23:36:00 openelec user.notice kernel: [ 0.210024] SCSI subsystem initialized
  284. Mar 1 23:36:00 openelec user.info kernel: [ 0.210026] ACPI: bus type scsi registered
  285. Mar 1 23:36:00 openelec user.debug kernel: [ 0.210043] libata version 3.00 loaded.
  286. Mar 1 23:36:00 openelec user.info kernel: [ 0.210055] ACPI: bus type usb registered
  287. Mar 1 23:36:00 openelec user.info kernel: [ 0.210066] usbcore: registered new interface driver usbfs
  288. Mar 1 23:36:00 openelec user.info kernel: [ 0.210072] usbcore: registered new interface driver hub
  289. Mar 1 23:36:00 openelec user.info kernel: [ 0.210083] usbcore: registered new device driver usb
  290. Mar 1 23:36:00 openelec user.info kernel: [ 0.210102] PCI: Using ACPI for IRQ routing
  291. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211530] PCI: pci_cache_line_size set to 64 bytes
  292. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211565] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
  293. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211566] e820: reserve RAM buffer [mem 0xc0f40000-0xc3ffffff]
  294. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211567] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
  295. Mar 1 23:36:00 openelec user.info kernel: [ 0.211615] Bluetooth: Core ver 2.16
  296. Mar 1 23:36:00 openelec user.info kernel: [ 0.211619] NET: Registered protocol family 31
  297. Mar 1 23:36:00 openelec user.info kernel: [ 0.211619] Bluetooth: HCI device and connection manager initialized
  298. Mar 1 23:36:00 openelec user.info kernel: [ 0.211621] Bluetooth: HCI socket layer initialized
  299. Mar 1 23:36:00 openelec user.info kernel: [ 0.211622] Bluetooth: L2CAP socket layer initialized
  300. Mar 1 23:36:00 openelec user.info kernel: [ 0.211625] Bluetooth: SCO socket layer initialized
  301. Mar 1 23:36:00 openelec user.info kernel: [ 0.211661] cfg80211: Calling CRDA to update world regulatory domain
  302. Mar 1 23:36:00 openelec user.info kernel: [ 0.211811] Switching to clocksource hpet
  303. Mar 1 23:36:00 openelec user.notice kernel: [ 0.211853] FS-Cache: Loaded
  304. Mar 1 23:36:00 openelec user.info kernel: [ 0.211870] CacheFiles: Loaded
  305. Mar 1 23:36:00 openelec user.info kernel: [ 0.211878] pnp: PnP ACPI init
  306. Mar 1 23:36:00 openelec user.info kernel: [ 0.211882] ACPI: bus type pnp registered
  307. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211919] pnp 00:00: [bus 00-3f]
  308. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211921] pnp 00:00: [io 0x0cf8-0x0cff]
  309. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211922] pnp 00:00: [io 0x0000-0x0cf7 window]
  310. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211923] pnp 00:00: [io 0x0d00-0xffff window]
  311. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211924] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  312. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211926] pnp 00:00: [mem 0x000c0000-0x000dffff window]
  313. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211927] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
  314. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211928] pnp 00:00: [mem 0xdfa00000-0xfebfffff window]
  315. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211942] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
  316. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211983] pnp 00:01: [io 0x0010-0x001f]
  317. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211984] pnp 00:01: [io 0x0022-0x003f]
  318. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211985] pnp 00:01: [io 0x0044-0x004d]
  319. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211986] pnp 00:01: [io 0x0050-0x005f]
  320. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211987] pnp 00:01: [io 0x0062-0x0063]
  321. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211988] pnp 00:01: [io 0x0065-0x006f]
  322. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211989] pnp 00:01: [io 0x0074-0x007f]
  323. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211990] pnp 00:01: [io 0x0091-0x0093]
  324. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211991] pnp 00:01: [io 0x00a2-0x00bf]
  325. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211993] pnp 00:01: [io 0x00e0-0x00ef]
  326. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211994] pnp 00:01: [io 0x04d0-0x04d1]
  327. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211995] pnp 00:01: [io 0x0290-0x029f]
  328. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211996] pnp 00:01: [io 0x0800-0x0805]
  329. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211997] pnp 00:01: [io 0x0290-0x0294]
  330. Mar 1 23:36:00 openelec user.debug kernel: [ 0.211998] pnp 00:01: [io 0x0880-0x088f]
  331. Mar 1 23:36:00 openelec user.info kernel: [ 0.212015] system 00:01: [io 0x04d0-0x04d1] has been reserved
  332. Mar 1 23:36:00 openelec user.info kernel: [ 0.212016] system 00:01: [io 0x0290-0x029f] has been reserved
  333. Mar 1 23:36:00 openelec user.info kernel: [ 0.212018] system 00:01: [io 0x0800-0x0805] has been reserved
  334. Mar 1 23:36:00 openelec user.info kernel: [ 0.212020] system 00:01: [io 0x0290-0x0294] has been reserved
  335. Mar 1 23:36:00 openelec user.info kernel: [ 0.212021] system 00:01: [io 0x0880-0x088f] has been reserved
  336. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212023] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  337. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212029] pnp 00:02: [dma 4]
  338. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212031] pnp 00:02: [io 0x0000-0x000f]
  339. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212032] pnp 00:02: [io 0x0080-0x0090]
  340. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212033] pnp 00:02: [io 0x0094-0x009f]
  341. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212034] pnp 00:02: [io 0x00c0-0x00df]
  342. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212044] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
  343. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212070] pnp 00:03: [irq 0 disabled]
  344. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212074] pnp 00:03: [irq 8]
  345. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212076] pnp 00:03: [mem 0xfed00000-0xfed003ff]
  346. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212085] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
  347. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212098] pnp 00:04: [io 0x0070-0x0073]
  348. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212109] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
  349. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212113] pnp 00:05: [io 0x0061]
  350. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212122] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
  351. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212126] pnp 00:06: [io 0x00f0-0x00ff]
  352. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212130] pnp 00:06: [irq 13]
  353. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212140] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
  354. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212210] pnp 00:07: [io 0x0400-0x04cf]
  355. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212211] pnp 00:07: [io 0x04d2-0x04ff]
  356. Mar 1 23:36:00 openelec user.info kernel: [ 0.212224] system 00:07: [io 0x0400-0x04cf] has been reserved
  357. Mar 1 23:36:00 openelec user.info kernel: [ 0.212226] system 00:07: [io 0x04d2-0x04ff] has been reserved
  358. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212227] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
  359. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212233] pnp 00:08: [io 0x1000-0x107f]
  360. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212234] pnp 00:08: [io 0x1080-0x10ff]
  361. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212236] pnp 00:08: [io 0x1100-0x117f]
  362. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212237] pnp 00:08: [io 0x1180-0x11ff]
  363. Mar 1 23:36:00 openelec user.info kernel: [ 0.212250] system 00:08: [io 0x1000-0x107f] has been reserved
  364. Mar 1 23:36:00 openelec user.info kernel: [ 0.212252] system 00:08: [io 0x1080-0x10ff] has been reserved
  365. Mar 1 23:36:00 openelec user.info kernel: [ 0.212253] system 00:08: [io 0x1100-0x117f] has been reserved
  366. Mar 1 23:36:00 openelec user.info kernel: [ 0.212254] system 00:08: [io 0x1180-0x11ff] has been reserved
  367. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212256] system 00:08: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
  368. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212347] pnp 00:09: [io 0x0454-0x0457]
  369. Mar 1 23:36:00 openelec user.info kernel: [ 0.212362] system 00:09: [io 0x0454-0x0457] has been reserved
  370. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212364] system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
  371. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212373] pnp 00:0a: [mem 0xf4000000-0xf7ffffff]
  372. Mar 1 23:36:00 openelec user.info kernel: [ 0.212388] system 00:0a: [mem 0xf4000000-0xf7ffffff] has been reserved
  373. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212389] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
  374. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212482] pnp 00:0b: [mem 0x000d0a00-0x000d3fff]
  375. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212483] pnp 00:0b: [mem 0x000f0000-0x000f7fff]
  376. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212485] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
  377. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212486] pnp 00:0b: [mem 0x000fc000-0x000fffff]
  378. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212487] pnp 00:0b: [mem 0xc0f40000-0xc0fbffff]
  379. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212488] pnp 00:0b: [mem 0x00000000-0x0009ffff]
  380. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212489] pnp 00:0b: [mem 0x00100000-0xc0f3ffff]
  381. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212490] pnp 00:0b: [mem 0xc0fc0000-0xc0ffffff]
  382. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212491] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
  383. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212492] pnp 00:0b: [mem 0xfed10000-0xfed1dfff]
  384. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212494] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
  385. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212495] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
  386. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212496] pnp 00:0b: [mem 0xffb00000-0xffb7ffff]
  387. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212497] pnp 00:0b: [mem 0xfff00000-0xffffffff]
  388. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212499] pnp 00:0b: [mem 0x000e0000-0x000effff]
  389. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212500] pnp 00:0b: [mem 0x20000000-0x201fffff]
  390. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212501] pnp 00:0b: [mem 0x40000000-0x400fffff]
  391. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212502] pnp 00:0b: [mem 0xc1000000-0xdf9fffff]
  392. Mar 1 23:36:00 openelec user.info kernel: [ 0.212523] system 00:0b: [mem 0x000d0a00-0x000d3fff] has been reserved
  393. Mar 1 23:36:00 openelec user.info kernel: [ 0.212524] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
  394. Mar 1 23:36:00 openelec user.info kernel: [ 0.212526] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
  395. Mar 1 23:36:00 openelec user.info kernel: [ 0.212527] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
  396. Mar 1 23:36:00 openelec user.info kernel: [ 0.212528] system 00:0b: [mem 0xc0f40000-0xc0fbffff] could not be reserved
  397. Mar 1 23:36:00 openelec user.info kernel: [ 0.212530] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
  398. Mar 1 23:36:00 openelec user.info kernel: [ 0.212531] system 00:0b: [mem 0x00100000-0xc0f3ffff] could not be reserved
  399. Mar 1 23:36:00 openelec user.info kernel: [ 0.212533] system 00:0b: [mem 0xc0fc0000-0xc0ffffff] has been reserved
  400. Mar 1 23:36:00 openelec user.info kernel: [ 0.212534] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
  401. Mar 1 23:36:00 openelec user.info kernel: [ 0.212536] system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved
  402. Mar 1 23:36:00 openelec user.info kernel: [ 0.212537] system 00:0b: [mem 0xfed20000-0xfed8ffff] could not be reserved
  403. Mar 1 23:36:00 openelec user.info kernel: [ 0.212538] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
  404. Mar 1 23:36:00 openelec user.info kernel: [ 0.212540] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
  405. Mar 1 23:36:00 openelec user.info kernel: [ 0.212541] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
  406. Mar 1 23:36:00 openelec user.info kernel: [ 0.212543] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
  407. Mar 1 23:36:00 openelec user.info kernel: [ 0.212544] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved
  408. Mar 1 23:36:00 openelec user.info kernel: [ 0.212545] system 00:0b: [mem 0x40000000-0x400fffff] could not be reserved
  409. Mar 1 23:36:00 openelec user.info kernel: [ 0.212547] system 00:0b: [mem 0xc1000000-0xdf9fffff] could not be reserved
  410. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212548] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
  411. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212557] pnp 00:0c: [mem 0xffb80000-0xffbfffff]
  412. Mar 1 23:36:00 openelec user.debug kernel: [ 0.212569] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
  413. Mar 1 23:36:00 openelec user.info kernel: [ 0.212572] pnp: PnP ACPI: found 13 devices
  414. Mar 1 23:36:00 openelec user.info kernel: [ 0.212573] ACPI: ACPI bus type pnp unregistered
  415. Mar 1 23:36:00 openelec user.info kernel: [ 0.218008] pci 0000:00:1c.0: PCI bridge to [bus 01]
  416. Mar 1 23:36:00 openelec user.info kernel: [ 0.218011] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
  417. Mar 1 23:36:00 openelec user.info kernel: [ 0.218018] pci 0000:00:1c.0: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
  418. Mar 1 23:36:00 openelec user.info kernel: [ 0.218023] pci 0000:00:1c.1: PCI bridge to [bus 02]
  419. Mar 1 23:36:00 openelec user.info kernel: [ 0.218027] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
  420. Mar 1 23:36:00 openelec user.info kernel: [ 0.218034] pci 0000:00:1e.0: PCI bridge to [bus 03]
  421. Mar 1 23:36:00 openelec user.debug kernel: [ 0.218058] pci 0000:00:1e.0: setting latency timer to 64
  422. Mar 1 23:36:00 openelec user.debug kernel: [ 0.218061] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
  423. Mar 1 23:36:00 openelec user.debug kernel: [ 0.218062] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
  424. Mar 1 23:36:00 openelec user.debug kernel: [ 0.218064] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  425. Mar 1 23:36:00 openelec user.debug kernel: [ 0.218065] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
  426. Mar 1 23:36:00 openelec user.debug kernel: [ 0.218066] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
  427. Mar 1 23:36:00 openelec user.debug kernel: [ 0.218067] pci_bus 0000:00: resource 9 [mem 0xdfa00000-0xfebfffff]
  428. Mar 1 23:36:00 openelec user.debug kernel: [ 0.218069] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
  429. Mar 1 23:36:00 openelec user.debug kernel: [ 0.218070] pci_bus 0000:01: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
  430. Mar 1 23:36:00 openelec user.debug kernel: [ 0.218071] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
  431. Mar 1 23:36:00 openelec user.debug kernel: [ 0.218073] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
  432. Mar 1 23:36:00 openelec user.debug kernel: [ 0.218074] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
  433. Mar 1 23:36:00 openelec user.debug kernel: [ 0.218075] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
  434. Mar 1 23:36:00 openelec user.debug kernel: [ 0.218076] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
  435. Mar 1 23:36:00 openelec user.debug kernel: [ 0.218077] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff]
  436. Mar 1 23:36:00 openelec user.debug kernel: [ 0.218079] pci_bus 0000:03: resource 9 [mem 0xdfa00000-0xfebfffff]
  437. Mar 1 23:36:00 openelec user.info kernel: [ 0.218115] NET: Registered protocol family 2
  438. Mar 1 23:36:00 openelec user.info kernel: [ 0.218209] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
  439. Mar 1 23:36:00 openelec user.info kernel: [ 0.218601] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  440. Mar 1 23:36:00 openelec user.info kernel: [ 0.218696] TCP: Hash tables configured (established 262144 bind 65536)
  441. Mar 1 23:36:00 openelec user.info kernel: [ 0.218709] TCP: reno registered
  442. Mar 1 23:36:00 openelec user.info kernel: [ 0.218711] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  443. Mar 1 23:36:00 openelec user.info kernel: [ 0.218726] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  444. Mar 1 23:36:00 openelec user.info kernel: [ 0.218792] NET: Registered protocol family 1
  445. Mar 1 23:36:00 openelec user.info kernel: [ 0.218858] RPC: Registered named UNIX socket transport module.
  446. Mar 1 23:36:00 openelec user.info kernel: [ 0.218860] RPC: Registered udp transport module.
  447. Mar 1 23:36:00 openelec user.info kernel: [ 0.218860] RPC: Registered tcp transport module.
  448. Mar 1 23:36:00 openelec user.info kernel: [ 0.218861] RPC: Registered tcp NFSv4.1 backchannel transport module.
  449. Mar 1 23:36:00 openelec user.debug kernel: [ 0.218868] pci 0000:00:02.0: Boot video device
  450. Mar 1 23:36:00 openelec user.debug kernel: [ 0.245214] PCI: CLS 4 bytes, default 64
  451. Mar 1 23:36:00 openelec user.info kernel: [ 0.246243] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  452. Mar 1 23:36:00 openelec user.info kernel: [ 0.246246] software IO TLB [mem 0xbcf3a000-0xc0f39fff] (64MB) mapped at [ffff8800bcf3a000-ffff8800c0f39fff]
  453. Mar 1 23:36:00 openelec user.info kernel: [ 0.246584] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0xc
  454. Mar 1 23:36:00 openelec user.info kernel: [ 0.246589] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0xc
  455. Mar 1 23:36:00 openelec user.info kernel: [ 0.246594] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0xc
  456. Mar 1 23:36:00 openelec user.info kernel: [ 0.246597] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0xc
  457. Mar 1 23:36:00 openelec user.info kernel: [ 0.246614] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  458. Mar 1 23:36:00 openelec user.info kernel: [ 0.247041] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  459. Mar 1 23:36:00 openelec user.notice kernel: [ 0.247056] FS-Cache: Netfs 'nfs' registered for caching
  460. Mar 1 23:36:00 openelec user.notice kernel: [ 0.247110] NFS: Registering the id_resolver key type
  461. Mar 1 23:36:00 openelec user.notice kernel: [ 0.247116] Key type id_resolver registered
  462. Mar 1 23:36:00 openelec user.notice kernel: [ 0.247117] Key type id_legacy registered
  463. Mar 1 23:36:00 openelec user.info kernel: [ 0.247179] fuse init (API version 7.20)
  464. Mar 1 23:36:00 openelec user.info kernel: [ 0.247216] JFS: nTxBlock = 8192, nTxLock = 65536
  465. Mar 1 23:36:00 openelec user.info kernel: [ 0.247925] SGI XFS with security attributes, large block/inode numbers, no debug enabled
  466. Mar 1 23:36:00 openelec user.info kernel: [ 0.248128] Btrfs loaded
  467. Mar 1 23:36:00 openelec user.info kernel: [ 0.248131] msgmni has been set to 14984
  468. Mar 1 23:36:00 openelec user.info kernel: [ 0.248517] alg: No test for stdrng (krng)
  469. Mar 1 23:36:00 openelec user.info kernel: [ 0.248535] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  470. Mar 1 23:36:00 openelec user.info kernel: [ 0.248537] io scheduler noop registered
  471. Mar 1 23:36:00 openelec user.info kernel: [ 0.248548] io scheduler cfq registered (default)
  472. Mar 1 23:36:00 openelec user.debug kernel: [ 0.248677] intel_idle: MWAIT substates: 0x1120
  473. Mar 1 23:36:00 openelec user.debug kernel: [ 0.248678] intel_idle: v0.4 model 0x3A
  474. Mar 1 23:36:00 openelec user.debug kernel: [ 0.248679] intel_idle: lapic_timer_reliable_states 0xffffffff
  475. Mar 1 23:36:00 openelec user.info kernel: [ 0.248718] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  476. Mar 1 23:36:00 openelec user.info kernel: [ 0.248721] ACPI: Power Button [PWRB]
  477. Mar 1 23:36:00 openelec user.info kernel: [ 0.248750] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  478. Mar 1 23:36:00 openelec user.info kernel: [ 0.248752] ACPI: Power Button [PWRF]
  479. Mar 1 23:36:00 openelec user.info kernel: [ 0.248792] ACPI: Requesting acpi_cpufreq
  480. Mar 1 23:36:00 openelec user.info kernel: [ 0.250318] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  481. Mar 1 23:36:00 openelec user.info kernel: [ 0.250521] Linux agpgart interface v0.103
  482. Mar 1 23:36:00 openelec user.info kernel: [ 0.250539] [drm] Initialized drm 1.1.0 20060810
  483. Mar 1 23:36:00 openelec user.info kernel: [ 0.250656] pci 0000:00:00.0: Intel Ivybridge Chipset
  484. Mar 1 23:36:00 openelec user.info kernel: [ 0.250692] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
  485. Mar 1 23:36:00 openelec user.info kernel: [ 0.251248] pci 0000:00:00.0: detected 491520K stolen memory
  486. Mar 1 23:36:00 openelec user.debug kernel: [ 0.251281] i915 0000:00:02.0: setting latency timer to 64
  487. Mar 1 23:36:00 openelec user.err kernel: [ 0.265154] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake old ack to clear.
  488. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265218] ------------[ cut here ]------------
  489. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265222] WARNING: at drivers/gpu/drm/i915/intel_pm.c:4076 gen6_gt_check_fifodbg+0x2d/0x3e()
  490. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265223] Hardware name: H61N-USB3
  491. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265224] MMIO read or write has been dropped 3
  492. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265225] Modules linked in:
  493. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265227] Pid: 1, comm: swapper/0 Not tainted 3.7.9 #1
  494. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265228] Call Trace:
  495. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265232] [<ffffffff81022578>] ? warn_slowpath_common+0x76/0x8a
  496. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265234] [<ffffffff81022624>] ? warn_slowpath_fmt+0x45/0x4a
  497. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265236] [<ffffffff813682b7>] ? gen6_gt_check_fifodbg+0x2d/0x3e
  498. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265238] [<ffffffff813693ec>] ? intel_gt_init+0x88/0xcc
  499. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265241] [<ffffffff813381f0>] ? i915_driver_load+0x6fd/0xd08
  500. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265244] [<ffffffff81329c2f>] ? drm_get_pci_dev+0x14d/0x254
  501. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265246] [<ffffffff813811f1>] ? __pm_runtime_resume+0x60/0x6f
  502. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265249] [<ffffffff812b226d>] ? pci_device_probe+0x60/0x9d
  503. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265251] [<ffffffff81379c43>] ? driver_probe_device+0x1b0/0x1b0
  504. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265252] [<ffffffff81379b25>] ? driver_probe_device+0x92/0x1b0
  505. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265253] [<ffffffff81379c96>] ? __driver_attach+0x53/0x73
  506. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265255] [<ffffffff8137842b>] ? bus_for_each_dev+0x46/0x77
  507. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265256] [<ffffffff8137934a>] ? bus_add_driver+0xdc/0x1fb
  508. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265259] [<ffffffff81ab513f>] ? drm_core_init+0x121/0x121
  509. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265260] [<ffffffff8137a1b4>] ? driver_register+0x89/0x101
  510. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265261] [<ffffffff81ab513f>] ? drm_core_init+0x121/0x121
  511. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265263] [<ffffffff81000226>] ? do_one_initcall+0x75/0x123
  512. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265266] [<ffffffff81a94c0d>] ? kernel_init_freeable+0x133/0x1fd
  513. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265268] [<ffffffff81a944fa>] ? do_early_param+0x83/0x83
  514. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265270] [<ffffffff815a5c22>] ? rest_init+0x66/0x66
  515. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265271] [<ffffffff815a5c28>] ? kernel_init+0x6/0xe2
  516. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265273] [<ffffffff815cc0ec>] ? ret_from_fork+0x7c/0xb0
  517. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265274] [<ffffffff815a5c22>] ? rest_init+0x66/0x66
  518. Mar 1 23:36:00 openelec user.warn kernel: [ 0.265278] ---[ end trace 67f36d1d439db8f8 ]---
  519. Mar 1 23:36:00 openelec user.debug kernel: [ 0.265345] i915 0000:00:02.0: irq 40 for MSI/MSI-X
  520. Mar 1 23:36:00 openelec user.info kernel: [ 0.265350] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  521. Mar 1 23:36:00 openelec user.info kernel: [ 0.265351] [drm] Driver supports precise vblank timestamp query.
  522. Mar 1 23:36:00 openelec user.info kernel: [ 0.265375] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  523. Mar 1 23:36:00 openelec user.err kernel: [ 0.305151] [drm:__gen6_gt_force_wake_get] *ERROR* Timed out waiting for forcewake old ack to clear.
  524. Mar 1 23:36:00 openelec user.info kernel: [ 0.305351] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
  525. Mar 1 23:36:00 openelec user.info kernel: [ 0.602170] fbcon: inteldrmfb (fb0) is primary device
  526. Mar 1 23:36:00 openelec user.info kernel: [ 0.813379] Console: switching to colour frame buffer device 240x75
  527. Mar 1 23:36:00 openelec user.info kernel: [ 0.819158] fb0: inteldrmfb frame buffer device
  528. Mar 1 23:36:00 openelec user.info kernel: [ 0.819158] drm: registered panic notifier
  529. Mar 1 23:36:00 openelec user.info kernel: [ 0.819182] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
  530. Mar 1 23:36:00 openelec user.info kernel: [ 0.819798] brd: module loaded
  531. Mar 1 23:36:00 openelec user.info kernel: [ 0.820118] loop: module loaded
  532. Mar 1 23:36:00 openelec user.info kernel: [ 0.820254] nbd: registered device at major 43
  533. Mar 1 23:36:00 openelec user.info kernel: [ 0.820812] Loading iSCSI transport class v2.0-870.
  534. Mar 1 23:36:00 openelec user.notice kernel: [ 0.820874] iscsi: registered transport (tcp)
  535. Mar 1 23:36:00 openelec user.debug kernel: [ 0.820919] ahci 0000:00:1f.2: version 3.0
  536. Mar 1 23:36:00 openelec user.debug kernel: [ 0.820955] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
  537. Mar 1 23:36:00 openelec user.info kernel: [ 0.820976] ahci: SSS flag set, parallel bus scan disabled
  538. Mar 1 23:36:00 openelec user.info kernel: [ 0.831828] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
  539. Mar 1 23:36:00 openelec user.info kernel: [ 0.831831] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst
  540. Mar 1 23:36:00 openelec user.debug kernel: [ 0.831835] ahci 0000:00:1f.2: setting latency timer to 64
  541. Mar 1 23:36:00 openelec user.info kernel: [ 0.845374] scsi0 : ahci
  542. Mar 1 23:36:00 openelec user.info kernel: [ 0.845423] scsi1 : ahci
  543. Mar 1 23:36:00 openelec user.info kernel: [ 0.845458] scsi2 : ahci
  544. Mar 1 23:36:00 openelec user.info kernel: [ 0.845491] scsi3 : ahci
  545. Mar 1 23:36:00 openelec user.info kernel: [ 0.845525] scsi4 : ahci
  546. Mar 1 23:36:00 openelec user.info kernel: [ 0.845558] scsi5 : ahci
  547. Mar 1 23:36:00 openelec user.info kernel: [ 0.845579] ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 41
  548. Mar 1 23:36:00 openelec user.info kernel: [ 0.845581] ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 41
  549. Mar 1 23:36:00 openelec user.info kernel: [ 0.845581] ata3: DUMMY
  550. Mar 1 23:36:00 openelec user.info kernel: [ 0.845582] ata4: DUMMY
  551. Mar 1 23:36:00 openelec user.info kernel: [ 0.845583] ata5: DUMMY
  552. Mar 1 23:36:00 openelec user.info kernel: [ 0.845584] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 41
  553. Mar 1 23:36:00 openelec user.info kernel: [ 0.845700] tun: Universal TUN/TAP device driver, 1.6
  554. Mar 1 23:36:00 openelec user.info kernel: [ 0.845701] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  555. Mar 1 23:36:00 openelec user.info kernel: [ 0.845741] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  556. Mar 1 23:36:00 openelec user.info kernel: [ 0.845741] e100: Copyright(c) 1999-2006 Intel Corporation
  557. Mar 1 23:36:00 openelec user.info kernel: [ 0.845749] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  558. Mar 1 23:36:00 openelec user.info kernel: [ 0.845750] e1000: Copyright (c) 1999-2006 Intel Corporation.
  559. Mar 1 23:36:00 openelec user.info kernel: [ 0.845758] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
  560. Mar 1 23:36:00 openelec user.info kernel: [ 0.845759] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
  561. Mar 1 23:36:00 openelec user.info kernel: [ 0.845773] sky2: driver version 1.30
  562. Mar 1 23:36:00 openelec user.info kernel: [ 0.845783] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  563. Mar 1 23:36:00 openelec user.debug kernel: [ 0.845987] r8169 0000:01:00.0: irq 42 for MSI/MSI-X
  564. Mar 1 23:36:00 openelec user.info kernel: [ 0.846077] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000062000, 90:2b:34:5c:6d:0e, XID 0c900800 IRQ 42
  565. Mar 1 23:36:00 openelec user.info kernel: [ 0.846079] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  566. Mar 1 23:36:00 openelec user.info kernel: [ 0.846091] PPP generic driver version 2.4.2
  567. Mar 1 23:36:00 openelec user.info kernel: [ 0.846112] PPP BSD Compression module registered
  568. Mar 1 23:36:00 openelec user.info kernel: [ 0.846113] PPP Deflate Compression module registered
  569. Mar 1 23:36:00 openelec user.info kernel: [ 0.846115] PPP MPPE Compression module registered
  570. Mar 1 23:36:00 openelec user.info kernel: [ 0.846116] NET: Registered protocol family 24
  571. Mar 1 23:36:00 openelec user.info kernel: [ 0.846124] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  572. Mar 1 23:36:00 openelec user.debug kernel: [ 0.846141] ehci_hcd 0000:00:1a.0: setting latency timer to 64
  573. Mar 1 23:36:00 openelec user.info kernel: [ 0.846143] ehci_hcd 0000:00:1a.0: EHCI Host Controller
  574. Mar 1 23:36:00 openelec user.info kernel: [ 0.846147] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
  575. Mar 1 23:36:00 openelec user.info kernel: [ 0.846158] ehci_hcd 0000:00:1a.0: debug port 2
  576. Mar 1 23:36:00 openelec user.debug kernel: [ 0.850061] ehci_hcd 0000:00:1a.0: cache line size of 4 is not supported
  577. Mar 1 23:36:00 openelec user.info kernel: [ 0.850091] ehci_hcd 0000:00:1a.0: irq 18, io mem 0xfbffe000
  578. Mar 1 23:36:00 openelec user.info kernel: [ 0.858479] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  579. Mar 1 23:36:00 openelec user.info kernel: [ 0.858559] hub 1-0:1.0: USB hub found
  580. Mar 1 23:36:00 openelec user.info kernel: [ 0.858563] hub 1-0:1.0: 2 ports detected
  581. Mar 1 23:36:00 openelec user.debug kernel: [ 0.858631] ehci_hcd 0000:00:1d.0: setting latency timer to 64
  582. Mar 1 23:36:00 openelec user.info kernel: [ 0.858633] ehci_hcd 0000:00:1d.0: EHCI Host Controller
  583. Mar 1 23:36:00 openelec user.info kernel: [ 0.858636] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  584. Mar 1 23:36:00 openelec user.info kernel: [ 0.858647] ehci_hcd 0000:00:1d.0: debug port 2
  585. Mar 1 23:36:00 openelec user.debug kernel: [ 0.862543] ehci_hcd 0000:00:1d.0: cache line size of 4 is not supported
  586. Mar 1 23:36:00 openelec user.info kernel: [ 0.862572] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbffd000
  587. Mar 1 23:36:00 openelec user.info kernel: [ 0.871815] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  588. Mar 1 23:36:00 openelec user.info kernel: [ 0.871890] hub 2-0:1.0: USB hub found
  589. Mar 1 23:36:00 openelec user.info kernel: [ 0.871893] hub 2-0:1.0: 2 ports detected
  590. Mar 1 23:36:00 openelec user.info kernel: [ 0.871944] uhci_hcd: USB Universal Host Controller Interface driver
  591. Mar 1 23:36:00 openelec user.info kernel: [ 0.871957] Initializing USB Mass Storage driver...
  592. Mar 1 23:36:00 openelec user.info kernel: [ 0.871967] usbcore: registered new interface driver usb-storage
  593. Mar 1 23:36:00 openelec user.info kernel: [ 0.871968] USB Mass Storage support registered.
  594. Mar 1 23:36:00 openelec user.info kernel: [ 0.871996] i8042: PNP: No PS/2 controller found. Probing ports directly.
  595. Mar 1 23:36:00 openelec user.warn kernel: [ 0.903853] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
  596. Mar 1 23:36:00 openelec user.warn kernel: [ 0.903854] i8042: If AUX port is really absent please use the 'i8042.noaux' option
  597. Mar 1 23:36:00 openelec user.info kernel: [ 1.151912] serio: i8042 KBD port at 0x60,0x64 irq 1
  598. Mar 1 23:36:00 openelec user.info kernel: [ 1.151963] mousedev: PS/2 mouse device common for all mice
  599. Mar 1 23:36:00 openelec user.info kernel: [ 1.152067] rtc_cmos 00:04: RTC can wake from S4
  600. Mar 1 23:36:00 openelec user.info kernel: [ 1.152146] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
  601. Mar 1 23:36:00 openelec user.info kernel: [ 1.152185] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
  602. Mar 1 23:36:00 openelec user.info kernel: [ 1.152191] i2c /dev entries driver
  603. Mar 1 23:36:00 openelec user.info kernel: [ 1.152329] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
  604. Mar 1 23:36:00 openelec user.info kernel: [ 1.152423] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1)
  605. Mar 1 23:36:00 openelec user.info kernel: [ 1.152463] cpuidle: using governor ladder
  606. Mar 1 23:36:00 openelec user.info kernel: [ 1.152513] cpuidle: using governor menu
  607. Mar 1 23:36:00 openelec user.info kernel: [ 1.152514] EFI Variables Facility v0.08 2004-May-17
  608. Mar 1 23:36:00 openelec user.info kernel: [ 1.152516] No iBFT detected.
  609. Mar 1 23:36:00 openelec user.info kernel: [ 1.152622] usbcore: registered new interface driver usbhid
  610. Mar 1 23:36:00 openelec user.info kernel: [ 1.152623] usbhid: USB HID core driver
  611. Mar 1 23:36:00 openelec user.info kernel: [ 1.152624] zram: num_devices not specified. Using default: 1
  612. Mar 1 23:36:00 openelec user.info kernel: [ 1.152625] zram: Creating 1 devices ...
  613. Mar 1 23:36:00 openelec user.info kernel: [ 1.152708] Netfilter messages via NETLINK v0.30.
  614. Mar 1 23:36:00 openelec user.info kernel: [ 1.152713] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  615. Mar 1 23:36:00 openelec user.info kernel: [ 1.152758] ctnetlink v0.93: registering with nfnetlink.
  616. Mar 1 23:36:00 openelec user.info kernel: [ 1.152788] TCP: cubic registered
  617. Mar 1 23:36:00 openelec user.info kernel: [ 1.152833] NET: Registered protocol family 10
  618. Mar 1 23:36:00 openelec user.info kernel: [ 1.152960] NET: Registered protocol family 17
  619. Mar 1 23:36:00 openelec user.info kernel: [ 1.153050] Bluetooth: RFCOMM TTY layer initialized
  620. Mar 1 23:36:00 openelec user.info kernel: [ 1.153057] Bluetooth: RFCOMM socket layer initialized
  621. Mar 1 23:36:00 openelec user.info kernel: [ 1.153059] Bluetooth: RFCOMM ver 1.11
  622. Mar 1 23:36:00 openelec user.info kernel: [ 1.153060] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  623. Mar 1 23:36:00 openelec user.info kernel: [ 1.153061] Bluetooth: BNEP filters: protocol multicast
  624. Mar 1 23:36:00 openelec user.info kernel: [ 1.153062] Bluetooth: BNEP socket layer initialized
  625. Mar 1 23:36:00 openelec user.info kernel: [ 1.153063] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  626. Mar 1 23:36:00 openelec user.info kernel: [ 1.153065] Bluetooth: HIDP socket layer initialized
  627. Mar 1 23:36:00 openelec user.info kernel: [ 1.153072] lib80211: common routines for IEEE802.11 drivers
  628. Mar 1 23:36:00 openelec user.debug kernel: [ 1.153073] lib80211_crypt: registered algorithm 'NULL'
  629. Mar 1 23:36:00 openelec user.notice kernel: [ 1.153079] Key type dns_resolver registered
  630. Mar 1 23:36:00 openelec user.info kernel: [ 1.153589] rtc_cmos 00:04: setting system clock to 2013-03-02 04:35:58 UTC (1362198958)
  631. Mar 1 23:36:00 openelec user.info kernel: [ 1.165262] usb 1-1: new high-speed USB device number 2 using ehci_hcd
  632. Mar 1 23:36:00 openelec user.info kernel: [ 1.248504] tsc: Refined TSC clocksource calibration: 3292.520 MHz
  633. Mar 1 23:36:00 openelec user.info kernel: [ 1.248509] Switching to clocksource tsc
  634. Mar 1 23:36:00 openelec user.info kernel: [ 1.289705] hub 1-1:1.0: USB hub found
  635. Mar 1 23:36:00 openelec user.info kernel: [ 1.289861] hub 1-1:1.0: 4 ports detected
  636. Mar 1 23:36:00 openelec user.info kernel: [ 1.331892] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  637. Mar 1 23:36:00 openelec user.info kernel: [ 1.332367] ata1.00: ATA-7: INTEL SSDSA2M080G2GN, 2CV102M3, max UDMA/133
  638. Mar 1 23:36:00 openelec user.info kernel: [ 1.332372] ata1.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
  639. Mar 1 23:36:00 openelec user.info kernel: [ 1.332939] ata1.00: configured for UDMA/133
  640. Mar 1 23:36:00 openelec user.notice kernel: [ 1.333098] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
  641. Mar 1 23:36:00 openelec user.notice kernel: [ 1.333211] sd 0:0:0:0: Attached scsi generic sg0 type 0
  642. Mar 1 23:36:00 openelec user.notice kernel: [ 1.333235] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
  643. Mar 1 23:36:00 openelec user.notice kernel: [ 1.333282] sd 0:0:0:0: [sda] Write Protect is off
  644. Mar 1 23:36:00 openelec user.debug kernel: [ 1.333286] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  645. Mar 1 23:36:00 openelec user.notice kernel: [ 1.333294] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  646. Mar 1 23:36:00 openelec user.info kernel: [ 1.336256] sda: sda1 sda2
  647. Mar 1 23:36:00 openelec user.notice kernel: [ 1.336519] sd 0:0:0:0: [sda] Attached SCSI disk
  648. Mar 1 23:36:00 openelec user.info kernel: [ 1.395225] usb 2-1: new high-speed USB device number 2 using ehci_hcd
  649. Mar 1 23:36:00 openelec user.info kernel: [ 1.519658] hub 2-1:1.0: USB hub found
  650. Mar 1 23:36:00 openelec user.info kernel: [ 1.519859] hub 2-1:1.0: 6 ports detected
  651. Mar 1 23:36:00 openelec user.info kernel: [ 1.598713] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
  652. Mar 1 23:36:00 openelec user.info kernel: [ 1.752116] usb 1-1.2: new low-speed USB device number 4 using ehci_hcd
  653. Mar 1 23:36:00 openelec user.info kernel: [ 1.818561] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  654. Mar 1 23:36:00 openelec user.info kernel: [ 1.820076] ata2.00: ATA-8: Hitachi HTS541010A9E680, JA0OA480, max UDMA/133
  655. Mar 1 23:36:00 openelec user.info kernel: [ 1.820078] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  656. Mar 1 23:36:00 openelec user.info kernel: [ 1.821804] ata2.00: configured for UDMA/133
  657. Mar 1 23:36:00 openelec user.notice kernel: [ 1.821995] scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54101 JA0O PQ: 0 ANSI: 5
  658. Mar 1 23:36:00 openelec user.notice kernel: [ 1.822150] sd 1:0:0:0: Attached scsi generic sg1 type 0
  659. Mar 1 23:36:00 openelec user.notice kernel: [ 1.822159] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  660. Mar 1 23:36:00 openelec user.notice kernel: [ 1.822163] sd 1:0:0:0: [sdb] 4096-byte physical blocks
  661. Mar 1 23:36:00 openelec user.notice kernel: [ 1.822201] sd 1:0:0:0: [sdb] Write Protect is off
  662. Mar 1 23:36:00 openelec user.debug kernel: [ 1.822204] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  663. Mar 1 23:36:00 openelec user.notice kernel: [ 1.822218] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  664. Mar 1 23:36:00 openelec user.info kernel: [ 1.860555] sdb: unknown partition table
  665. Mar 1 23:36:00 openelec user.notice kernel: [ 1.860701] sd 1:0:0:0: [sdb] Attached SCSI disk
  666. Mar 1 23:36:00 openelec user.info kernel: [ 1.875309] input: Qsenn 2.4 GHz RF Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
  667. Mar 1 23:36:00 openelec user.info kernel: [ 1.875600] hid-generic 0003:0040:073D.0001: input,hidraw0: USB HID v1.10 Keyboard [Qsenn 2.4 GHz RF Receiver] on usb-0000:00:1a.0-1.2/input0
  668. Mar 1 23:36:00 openelec user.info kernel: [ 1.893398] input: Qsenn 2.4 GHz RF Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input3
  669. Mar 1 23:36:00 openelec user.info kernel: [ 1.893941] hid-generic 0003:0040:073D.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Qsenn 2.4 GHz RF Receiver] on usb-0000:00:1a.0-1.2/input1
  670. Mar 1 23:36:00 openelec user.info kernel: [ 1.972103] usb 1-1.3: new high-speed USB device number 5 using ehci_hcd
  671. Mar 1 23:36:00 openelec user.info kernel: [ 2.141854] ata6: SATA link down (SStatus 0 SControl 300)
  672. Mar 1 23:36:00 openelec user.info kernel: [ 2.148455] Freeing unused kernel memory: 4392k freed
  673. Mar 1 23:36:00 openelec user.info kernel: [ 2.149096] Write protecting the kernel read-only data: 10240k
  674. Mar 1 23:36:00 openelec user.info kernel: [ 2.150173] Freeing unused kernel memory: 196k freed
  675. Mar 1 23:36:00 openelec user.info kernel: [ 2.157769] Freeing unused kernel memory: 1940k freed
  676. Mar 1 23:36:00 openelec user.info kernel: [ 2.170404] xhci_hcd 0000:02:00.0: xHCI Host Controller
  677. Mar 1 23:36:00 openelec user.info kernel: [ 2.170410] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
  678. Mar 1 23:36:00 openelec user.info kernel: [ 2.170606] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfbee0000
  679. Mar 1 23:36:00 openelec user.debug kernel: [ 2.170744] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
  680. Mar 1 23:36:00 openelec user.debug kernel: [ 2.170755] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
  681. Mar 1 23:36:00 openelec user.debug kernel: [ 2.170761] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
  682. Mar 1 23:36:00 openelec user.debug kernel: [ 2.170767] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
  683. Mar 1 23:36:00 openelec user.debug kernel: [ 2.170773] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
  684. Mar 1 23:36:00 openelec user.debug kernel: [ 2.171234] xHCI xhci_add_endpoint called for root hub
  685. Mar 1 23:36:00 openelec user.debug kernel: [ 2.171238] xHCI xhci_check_bandwidth called for root hub
  686. Mar 1 23:36:00 openelec user.info kernel: [ 2.171267] hub 3-0:1.0: USB hub found
  687. Mar 1 23:36:00 openelec user.info kernel: [ 2.171275] hub 3-0:1.0: 2 ports detected
  688. Mar 1 23:36:00 openelec user.info kernel: [ 2.171348] xhci_hcd 0000:02:00.0: xHCI Host Controller
  689. Mar 1 23:36:00 openelec user.info kernel: [ 2.171353] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
  690. Mar 1 23:36:00 openelec user.debug kernel: [ 2.171446] xHCI xhci_add_endpoint called for root hub
  691. Mar 1 23:36:00 openelec user.debug kernel: [ 2.171448] xHCI xhci_check_bandwidth called for root hub
  692. Mar 1 23:36:00 openelec user.info kernel: [ 2.171474] hub 4-0:1.0: USB hub found
  693. Mar 1 23:36:00 openelec user.info kernel: [ 2.171481] hub 4-0:1.0: 2 ports detected
  694. Mar 1 23:36:00 openelec user.err kernel: [ 2.221246] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
  695. Mar 1 23:36:00 openelec user.err kernel: [ 2.221368] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
  696. Mar 1 23:36:00 openelec user.info kernel: [ 2.221958] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  697. Mar 1 23:36:00 openelec user.err kernel: [ 2.263616] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
  698. Mar 1 23:36:00 openelec user.err kernel: [ 2.263804] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
  699. Mar 1 23:36:00 openelec user.info kernel: [ 2.272017] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
  700. Mar 1 23:36:00 openelec daemon.info kernel: [ 2.783438] systemd-udevd[241]: starting version 197
  701. Mar 1 23:36:00 openelec user.notice Boot: ### monitoring udev events ###
  702. Mar 1 23:36:00 openelec user.notice Boot: ### request udev events from the kernel (type: subsystems) ###
  703. Mar 1 23:36:00 openelec user.notice Boot: ### request udev events from the kernel (type: devices) ###
  704. Mar 1 23:36:00 openelec user.notice Boot: ### watching udev event queue from the kernel ###
  705. Mar 1 23:36:00 openelec user.notice Boot: ### Starting D-BUS ###
  706. Mar 1 23:36:00 openelec user.notice Boot: ### Starting Fuse ###
  707. Mar 1 23:36:00 openelec user.notice Boot: ### loading kernel modules ###
  708. Mar 1 23:36:00 openelec user.notice Boot: ### starting Connection manager ###
  709. Mar 1 23:36:00 openelec user.debug kernel: [ 2.822996] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
  710. Mar 1 23:36:00 openelec user.notice Boot: ### start rpcbind daemon ###
  711. Mar 1 23:36:00 openelec user.notice Boot: ### creating system settings ###
  712. Mar 1 23:36:00 openelec user.notice Boot: ### Setup hostname ###
  713. Mar 1 23:36:00 openelec user.notice Boot: ### creating /etc/hosts ###
  714. Mar 1 23:36:00 openelec user.info kernel: [ 2.855092] Registered IR keymap rc-rc6-mce
  715. Mar 1 23:36:00 openelec user.info kernel: [ 2.855174] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/rc/rc0/input4
  716. Mar 1 23:36:00 openelec user.info kernel: [ 2.855252] rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/rc/rc0
  717. Mar 1 23:36:00 openelec daemon.err rpcbind: cannot get local address for udp: Servname not supported for ai_socktype
  718. Mar 1 23:36:00 openelec user.info kernel: [ 2.860062] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
  719. Mar 1 23:36:00 openelec daemon.err rpcbind: cannot get local address for tcp: Servname not supported for ai_socktype
  720. Mar 1 23:36:00 openelec user.notice Xorg: ### starting Xorg with driver i915 ###
  721. Mar 1 23:36:00 openelec user.info kernel: [ 2.868511] IR NEC protocol handler initialized
  722. Mar 1 23:36:00 openelec daemon.err rpcbind: cannot get local address for udp6: Servname not supported for ai_socktype
  723. Mar 1 23:36:00 openelec user.notice Xorg: ### setup xorg.conf paths ###
  724. Mar 1 23:36:00 openelec user.info kernel: [ 2.871965] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
  725. Mar 1 23:36:00 openelec user.info kernel: [ 2.872028] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
  726. Mar 1 23:36:00 openelec user.info kernel: [ 2.872083] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
  727. Mar 1 23:36:00 openelec user.info kernel: [ 2.872136] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
  728. Mar 1 23:36:00 openelec user.info kernel: [ 2.872191] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
  729. Mar 1 23:36:00 openelec user.info kernel: [ 2.872245] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
  730. Mar 1 23:36:00 openelec user.info kernel: [ 2.873468] IR RC5(x) protocol handler initialized
  731. Mar 1 23:36:00 openelec user.notice Xorg: ### creating start options ###
  732. Mar 1 23:36:00 openelec user.info kernel: [ 2.875293] IR RC6 protocol handler initialized
  733. Mar 1 23:36:00 openelec user.info kernel: [ 2.877815] IR JVC protocol handler initialized
  734. Mar 1 23:36:00 openelec user.notice Xorg: ### creating needed directories and symlinks ###
  735. Mar 1 23:36:00 openelec daemon.err rpcbind: cannot get local address for tcp6: Servname not supported for ai_socktype
  736. Mar 1 23:36:00 openelec user.info kernel: [ 2.881228] IR Sony protocol handler initialized
  737. Mar 1 23:36:00 openelec user.notice Boot: ### Setup networking 1 LAN ###
  738. Mar 1 23:36:00 openelec user.info kernel: [ 2.884313] IR SANYO protocol handler initialized
  739. Mar 1 23:36:00 openelec user.notice Boot: ### automount internal disks ###
  740. Mar 1 23:36:00 openelec user.notice Boot: ### starting ConsoleKit daemon ###
  741. Mar 1 23:36:00 openelec user.notice Connman: ### [1] found /sys/class/net/eth0/address, continue ###
  742. Mar 1 23:36:00 openelec user.notice Xorg: ### starting Xorg with ':0.0 vt01 -s 0 -noreset -allowMouseOpenFail' ###
  743. Mar 1 23:36:00 openelec user.notice Boot: ### Setup networking 2 LAN ###
  744. Mar 1 23:36:00 openelec user.info kernel: [ 2.901880] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input12
  745. Mar 1 23:36:00 openelec user.info kernel: [ 2.902179] IR MCE Keyboard/mouse protocol handler initialized
  746. Mar 1 23:36:00 openelec user.notice Connman: ### [1] cannot find /sys/class/net/eth1/address ###
  747. Mar 1 23:36:00 openelec daemon.notice dbus[356]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
  748. Mar 1 23:36:00 openelec user.notice Boot: ### Creating fontconfig cache ###
  749. Mar 1 23:36:00 openelec daemon.notice dbus[356]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
  750. Mar 1 23:36:00 openelec daemon.notice dbus[356]: [system] Successfully activated service 'org.freedesktop.UDisks'
  751. Mar 1 23:36:00 openelec user.notice Boot: ### starting eventlircd ###
  752. Mar 1 23:36:00 openelec user.notice Boot: ### Setting up sound card ###
  753. Mar 1 23:36:00 openelec user.notice Boot: ### starting Windowmanager ###
  754. Mar 1 23:36:00 openelec user.notice Boot: ### clean up log files ###
  755. Mar 1 23:36:00 openelec user.notice Boot: ### setup XBMC ###
  756. Mar 1 23:36:00 openelec daemon.info polkitd[715]: started daemon version 0.104 using authority implementation `local' version `0.104'
  757. Mar 1 23:36:00 openelec daemon.notice dbus[356]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
  758. Mar 1 23:36:00 openelec user.notice Boot: ### starting XBMC ###
  759. Mar 1 23:36:00 openelec user.info kernel: [ 3.045097] mceusb 1-1.1:1.0: Registered Philips eHome Infrared Transceiver with mce emulator interface version 1
  760. Mar 1 23:36:00 openelec user.info kernel: [ 3.045101] mceusb 1-1.1:1.0: 2 tx ports (0x1 cabled) and 2 rx sensors (0x1 active)
  761. Mar 1 23:36:00 openelec user.info kernel: [ 3.045126] usbcore: registered new interface driver mceusb
  762. Mar 1 23:36:00 openelec user.info kernel: [ 3.132675] asix 1-1.3:1.0 eth1: register 'asix' at usb-0000:00:1a.0-1.3, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:dd:a8
  763. Mar 1 23:36:00 openelec user.info kernel: [ 3.132700] usbcore: registered new interface driver asix
  764. Mar 1 23:36:00 openelec user.notice Connman: ### [2] found /sys/class/net/eth1/address, continue ###
  765. Mar 1 23:36:00 openelec daemon.info connmand[1096]: Connection Manager version 1.11
  766. Mar 1 23:36:00 openelec user.info kernel: [ 3.431680] ip_tables: (C) 2000-2006 Netfilter Core Team
  767. Mar 1 23:36:00 openelec daemon.info connmand[1096]: Checking loopback interface settings
  768. Mar 1 23:36:00 openelec daemon.info connmand[1096]: System hostname is Diane-HTPC
  769. Mar 1 23:36:00 openelec daemon.notice dbus[356]: [system] Activating service name='net.connman.vpn' (using servicehelper)
  770. Mar 1 23:36:00 openelec daemon.info connmand[1096]: lo {newlink} index 1 operstate 0 <UNKNOWN>
  771. Mar 1 23:36:00 openelec daemon.info connmand[1096]: eth0 {create} index 2 type 1 <ETHER>
  772. Mar 1 23:36:00 openelec daemon.info connmand[1096]: eth0 {update} flags 4098 <DOWN>
  773. Mar 1 23:36:00 openelec daemon.info connmand[1096]: eth0 {newlink} index 2 address 90:2B:34:5C:6D:0E mtu 1500
  774. Mar 1 23:36:00 openelec daemon.info connmand[1096]: eth0 {newlink} index 2 operstate 2 <DOWN>
  775. Mar 1 23:36:00 openelec daemon.info connmand[1096]: Adding interface eth0 [ ethernet ]
  776. Mar 1 23:36:00 openelec daemon.notice dbus[356]: [system] Activating service name='fi.w1.wpa_supplicant1' (using servicehelper)
  777. Mar 1 23:36:00 openelec daemon.notice dbus[356]: [system] Successfully activated service 'net.connman.vpn'
  778. Mar 1 23:36:00 openelec daemon.info connman-vpnd[1120]: Connection Manager VPN daemon version 1.11
  779. Mar 1 23:36:00 openelec daemon.notice dbus[356]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
  780. Mar 1 23:36:00 openelec daemon.info connmand[1096]: eth1 {create} index 3 type 1 <ETHER>
  781. Mar 1 23:36:00 openelec daemon.info connman-vpnd[1120]: eth0 {create} index 2 type 1 <ETHER>
  782. Mar 1 23:36:00 openelec daemon.info connmand[1096]: eth1 {update} flags 4098 <DOWN>
  783. Mar 1 23:36:00 openelec daemon.info connman-vpnd[1120]: eth0 {update} flags 36867 <UP>
  784. Mar 1 23:36:00 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  785. Mar 1 23:36:00 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  786. Mar 1 23:36:00 openelec daemon.info connman-vpnd[1120]: eth0 {newlink} index 2 address 90:2B:34:5C:6D:0E mtu 1500
  787. Mar 1 23:36:00 openelec daemon.info connman-vpnd[1120]: eth0 {newlink} index 2 operstate 2 <DOWN>
  788. Mar 1 23:36:00 openelec daemon.info connman-vpnd[1120]: lo {newlink} index 1 operstate 0 <UNKNOWN>
  789. Mar 1 23:36:00 openelec daemon.info connman-vpnd[1120]: eth0 {newlink} index 2 address 90:2B:34:5C:6D:0E mtu 1500
  790. Mar 1 23:36:00 openelec daemon.info connman-vpnd[1120]: eth0 {newlink} index 2 operstate 2 <DOWN>
  791. Mar 1 23:36:00 openelec daemon.info connman-vpnd[1120]: eth1 {create} index 3 type 1 <ETHER>
  792. Mar 1 23:36:00 openelec daemon.info connmand[1096]: Adding interface eth1 [ ethernet ]
  793. Mar 1 23:36:00 openelec daemon.info connman-vpnd[1120]: eth1 {update} flags 4098 <DOWN>
  794. Mar 1 23:36:00 openelec daemon.info connman-vpnd[1120]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  795. Mar 1 23:36:00 openelec daemon.info connman-vpnd[1120]: eth1 {newlink} index 3 operstate 2 <DOWN>
  796. Mar 1 23:36:00 openelec user.info kernel: [ 3.561092] r8169 0000:01:00.0 eth0: link down
  797. Mar 1 23:36:00 openelec user.info kernel: [ 3.561124] r8169 0000:01:00.0 eth0: link down
  798. Mar 1 23:36:00 openelec user.info kernel: [ 3.561129] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  799. Mar 1 23:36:01 openelec daemon.info connman-vpnd[1120]: eth1 {update} flags 36867 <UP>
  800. Mar 1 23:36:01 openelec daemon.info connman-vpnd[1120]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  801. Mar 1 23:36:01 openelec daemon.info connman-vpnd[1120]: eth1 {newlink} index 3 operstate 2 <DOWN>
  802. Mar 1 23:36:01 openelec daemon.info connmand[1096]: eth0 {update} flags 36867 <UP>
  803. Mar 1 23:36:01 openelec daemon.info connmand[1096]: eth0 {newlink} index 2 address 90:2B:34:5C:6D:0E mtu 1500
  804. Mar 1 23:36:01 openelec daemon.info connmand[1096]: eth0 {newlink} index 2 operstate 2 <DOWN>
  805. Mar 1 23:36:01 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  806. Mar 1 23:36:01 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  807. Mar 1 23:36:01 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  808. Mar 1 23:36:01 openelec user.info kernel: [ 4.338902] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  809. Mar 1 23:36:01 openelec daemon.notice dbus[356]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper)
  810. Mar 1 23:36:01 openelec daemon.notice dbus[356]: [system] Successfully activated service 'org.freedesktop.UPower'
  811. Mar 1 23:36:01 openelec user.info kernel: [ 4.506323] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=0
  812. Mar 1 23:36:01 openelec user.info kernel: [ 4.508235] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=0
  813. Mar 1 23:36:01 openelec daemon.info connman-vpnd[1120]: No VPN configurations found, quitting.
  814. Mar 1 23:36:01 openelec daemon.info connman-vpnd[1120]: Terminating
  815. Mar 1 23:36:01 openelec daemon.info connman-vpnd[1120]: eth0 {remove} index 2
  816. Mar 1 23:36:01 openelec daemon.info connman-vpnd[1120]: eth1 {remove} index 3
  817. Mar 1 23:36:01 openelec daemon.info connman-vpnd[1120]: Exit
  818. Mar 1 23:36:02 openelec user.notice Tvheadend: ### Loading userspace DVB driver: driver.dvb.hdhomerun ###
  819. Mar 1 23:36:02 openelec user.info kernel: [ 5.699995] HDHomeRun: Begin init, version 0.0.14
  820. Mar 1 23:36:02 openelec user.info kernel: [ 5.700042] HDHomeRun: Waiting for userspace to connect
  821. Mar 1 23:36:02 openelec user.info kernel: [ 5.700043] HDHomeRun: End init
  822. Mar 1 23:36:02 openelec user.notice HDHomeRun: ### Pre wait for 2 sec ###
  823. Mar 1 23:36:04 openelec user.notice HDHomeRun: ### Post wait for 1 sec ###
  824. Mar 1 23:36:04 openelec user.warn kernel: [ 7.722569] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev- instead.
  825. Mar 1 23:36:05 openelec daemon.info connmand[1096]: eth1 {add} route ff00:: gw :: scope 0 <UNIVERSE>
  826. Mar 1 23:36:05 openelec daemon.info connmand[1096]: eth1 {add} route fe80:: gw :: scope 0 <UNIVERSE>
  827. Mar 1 23:36:05 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  828. Mar 1 23:36:05 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  829. Mar 1 23:36:05 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  830. Mar 1 23:36:05 openelec user.info kernel: [ 7.895978] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  831. Mar 1 23:36:05 openelec user.info kernel: [ 7.896812] asix 1-1.3:1.0 eth1: link down
  832. Mar 1 23:36:05 openelec daemon.warn connmand[1096]: Skipping disconnect of carrier, network is connecting.
  833. Mar 1 23:36:05 openelec daemon.info connmand[1096]: eth1 {add} address 169.254.1.10/24 label eth1 family 2
  834. Mar 1 23:36:05 openelec daemon.info connmand[1096]: eth1 {add} route 169.254.1.0 gw 0.0.0.0 scope 253 <LINK>
  835. Mar 1 23:36:05 openelec daemon.info connmand[1096]: eth1 {add} route 0.0.0.0 gw 0.0.0.0 scope 253 <LINK>
  836. Mar 1 23:36:05 openelec daemon.info connmand[1096]: eth0 {add} route ff00:: gw :: scope 0 <UNIVERSE>
  837. Mar 1 23:36:05 openelec daemon.info connmand[1096]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
  838. Mar 1 23:36:05 openelec daemon.info connmand[1096]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  839. Mar 1 23:36:05 openelec daemon.info connmand[1096]: eth0 {newlink} index 2 address 90:2B:34:5C:6D:0E mtu 1500
  840. Mar 1 23:36:05 openelec daemon.info connmand[1096]: eth0 {newlink} index 2 operstate 6 <UP>
  841. Mar 1 23:36:05 openelec user.info kernel: [ 8.473578] r8169 0000:01:00.0 eth0: link up
  842. Mar 1 23:36:05 openelec user.info kernel: [ 8.473585] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  843. Mar 1 23:36:05 openelec user.notice HDHomeRun: ### HDHomeRun ready ###
  844. Mar 1 23:36:05 openelec user.info tvheadend: START: initialising
  845. Mar 1 23:36:05 openelec daemon.debug tvheadend[1548]: config: no configuration, loading defaults
  846. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: charset: 71 entries loaded
  847. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: CSA: Using SSE2 128bit parallel descrambling
  848. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: epggrab: module eit created
  849. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: epggrab: module uk_freesat created
  850. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: epggrab: module uk_freeview created
  851. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: epggrab: module viasat_baltic created
  852. Mar 1 23:36:05 openelec daemon.debug tvheadend[1548]: opentv: dictionary skyit loaded
  853. Mar 1 23:36:05 openelec daemon.debug tvheadend[1548]: opentv: dictionary skyeng loaded
  854. Mar 1 23:36:05 openelec daemon.debug tvheadend[1548]: opentv: dictonaries loaded
  855. Mar 1 23:36:05 openelec daemon.debug tvheadend[1548]: opentv: genre map skyuk loaded
  856. Mar 1 23:36:05 openelec daemon.debug tvheadend[1548]: opentv: genre maps loaded
  857. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: epggrab: module opentv-ausat created
  858. Mar 1 23:36:05 openelec daemon.debug tvheadend[1548]: opentv: provider ausat loaded
  859. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: epggrab: module opentv-skyuk created
  860. Mar 1 23:36:05 openelec daemon.debug tvheadend[1548]: opentv: provider skyuk loaded
  861. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: epggrab: module opentv-skyit created
  862. Mar 1 23:36:05 openelec daemon.debug tvheadend[1548]: opentv: provider skyit loaded
  863. Mar 1 23:36:05 openelec daemon.debug tvheadend[1548]: opentv: providers loaded
  864. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: epggrab: module pyepg created
  865. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: epggrab: module xmltv created
  866. Mar 1 23:36:05 openelec daemon.debug tvheadend[1548]: epggrab: using internal grab search
  867. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: epggrab: module /storage/.xbmc/addons/service.multimedia.tvheadend/bin/tv_grab_file created
  868. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: /storage/.xbmc/addons/service.multimedia.tvheadend/bin/tv_grab_file: grab /storage/.xbmc/addons/service.multimedia.tvheadend/bin/tv_grab_file
  869. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: epgdb: loaded v2
  870. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: epgdb: channels 0
  871. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: epgdb: brands 0
  872. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: epgdb: seasons 0
  873. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: epgdb: episodes 0
  874. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: epgdb: broadcasts 0
  875. Mar 1 23:36:05 openelec daemon.info tvheadend[1548]: dvr: Creating new configuration ''
  876. Mar 1 23:36:05 openelec daemon.notice tvheadend[1548]: START: HTS Tvheadend version 3.3.485~gf4dda1b started, running as PID:1548 UID:0 GID:0, settings located in '/storage/.xbmc/userdata/addon_data/service.multimedia.tvheadend'
  877. Mar 1 23:36:05 openelec daemon.err tvheadend[1548]: /storage/.xbmc/addons/service.multimedia.tvheadend/bin/tv_grab_file: no output detected
  878. Mar 1 23:36:05 openelec daemon.warn tvheadend[1548]: /storage/.xbmc/addons/service.multimedia.tvheadend/bin/tv_grab_file: grab returned no data
  879. Mar 1 23:36:06 openelec daemon.info tvheadend[1548]: htsp: Got connection from 127.0.0.1
  880. Mar 1 23:36:06 openelec daemon.info tvheadend[1548]: htsp: 127.0.0.1: Welcomed client software: XBMC Media Center (HTSPv8)
  881. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  882. Mar 1 23:36:06 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  883. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  884. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  885. Mar 1 23:36:06 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  886. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth1 {del} route 0.0.0.0 gw 0.0.0.0 scope 253 <LINK>
  887. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth1 {del} address 169.254.1.10/24 label eth1
  888. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth1 {del} route 169.254.1.0 gw 0.0.0.0 scope 253 <LINK>
  889. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth1 {del} route fe80:: gw :: scope 0 <UNIVERSE>
  890. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth1 {del} route ff00:: gw :: scope 0 <UNIVERSE>
  891. Mar 1 23:36:06 openelec user.info kernel: [ 8.895732] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  892. Mar 1 23:36:06 openelec daemon.warn connmand[1096]: Skipping disconnect of carrier, network is connecting.
  893. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth0 {add} address 192.168.2.202/24 label eth0 family 2
  894. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth0 {add} route 192.168.2.0 gw 0.0.0.0 scope 253 <LINK>
  895. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth0 {add} route 192.168.2.3 gw 0.0.0.0 scope 253 <LINK>
  896. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth0 {add} route 0.0.0.0 gw 192.168.2.3 scope 0 <UNIVERSE>
  897. Mar 1 23:36:06 openelec daemon.info connmand[1096]: ntp: time slew -0.240312 s
  898. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth0 {add} route 81.169.141.235 gw 192.168.2.3 scope 0 <UNIVERSE>
  899. Mar 1 23:36:06 openelec daemon.info connmand[1096]: Client-IP: 24.210.59.78
  900. Mar 1 23:36:06 openelec daemon.info connmand[1096]: Client-Country: US
  901. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth0 {del} route 81.169.141.235 gw 192.168.2.3 scope 0 <UNIVERSE>
  902. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth1 {add} route ff00:: gw :: scope 0 <UNIVERSE>
  903. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth1 {add} route fe80:: gw :: scope 0 <UNIVERSE>
  904. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  905. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  906. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  907. Mar 1 23:36:06 openelec user.info kernel: [ 9.687944] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  908. Mar 1 23:36:06 openelec user.info kernel: [ 9.689470] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  909. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  910. Mar 1 23:36:06 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  911. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  912. Mar 1 23:36:06 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  913. Mar 1 23:36:09 openelec user.notice Boot: ### Starting Samba server ###
  914. Mar 1 23:36:09 openelec user.notice Boot: ### Starting Avahi Daemon ###
  915. Mar 1 23:36:09 openelec daemon.info avahi-daemon[1668]: Found user 'avahi' (UID 495) and group 'avahi' (GID 495).
  916. Mar 1 23:36:09 openelec daemon.info avahi-daemon[1668]: Successfully dropped root privileges.
  917. Mar 1 23:36:09 openelec daemon.info avahi-daemon[1668]: avahi-daemon 0.6.31 starting up.
  918. Mar 1 23:36:09 openelec daemon.warn avahi-daemon[1668]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
  919. Mar 1 23:36:09 openelec daemon.info avahi-daemon[1668]: Loading service file /etc/avahi/services/http.service.
  920. Mar 1 23:36:09 openelec daemon.info avahi-daemon[1668]: Loading service file /etc/avahi/services/sftp-ssh.service.
  921. Mar 1 23:36:09 openelec daemon.info avahi-daemon[1668]: Loading service file /etc/avahi/services/ssh.service.
  922. Mar 1 23:36:09 openelec daemon.info avahi-daemon[1668]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.2.202.
  923. Mar 1 23:36:09 openelec daemon.info avahi-daemon[1668]: New relevant interface eth0.IPv4 for mDNS.
  924. Mar 1 23:36:09 openelec daemon.info avahi-daemon[1668]: Network interface enumeration completed.
  925. Mar 1 23:36:09 openelec daemon.info avahi-daemon[1668]: Registering new address record for fe80::250:b6ff:fe0d:dda8 on eth1.*.
  926. Mar 1 23:36:09 openelec daemon.info avahi-daemon[1668]: Registering new address record for fe80::922b:34ff:fe5c:6d0e on eth0.*.
  927. Mar 1 23:36:09 openelec daemon.info avahi-daemon[1668]: Registering new address record for 192.168.2.202 on eth0.IPv4.
  928. Mar 1 23:36:09 openelec daemon.info avahi-daemon[1668]: Server startup complete. Host name is Diane-HTPC.local. Local service cookie is 2113932117.
  929. Mar 1 23:36:09 openelec daemon.info avahi-daemon[1668]: Registering HINFO record with values 'X86_64'/'LINUX'.
  930. Mar 1 23:36:09 openelec daemon.debug tvheadend[1548]: AVAHI: Adding service 'Tvheadend'
  931. Mar 1 23:36:09 openelec daemon.err smbd[1675]: [2013/03/01 23:36:09.922594, 0] passdb/pdb_smbpasswd.c:248(startsmbfilepwent)
  932. Mar 1 23:36:09 openelec daemon.err smbd[1675]: startsmbfilepwent_internal: file /var/run/smbpasswd did not exist. File successfully created.
  933. Mar 1 23:36:14 openelec user.notice Boot: ### set cpu's to 'ondemand' ###
  934. Mar 1 23:36:17 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  935. Mar 1 23:36:17 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  936. Mar 1 23:36:17 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  937. Mar 1 23:36:17 openelec user.info kernel: [ 20.440287] asix 1-1.3:1.0 eth1: link down
  938. Mar 1 23:36:18 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  939. Mar 1 23:36:18 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  940. Mar 1 23:36:18 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  941. Mar 1 23:36:18 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  942. Mar 1 23:36:30 openelec user.notice Boot: ### syncing hardware clock with system clock ###
  943. Mar 1 23:37:06 openelec daemon.info connmand[1096]: eth1 {RX} 1 packets 328 bytes
  944. Mar 1 23:37:06 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  945. Mar 1 23:37:06 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  946. Mar 1 23:37:06 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  947. Mar 1 23:37:06 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  948. Mar 1 23:37:06 openelec user.info kernel: [ 69.591594] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  949. Mar 1 23:37:07 openelec daemon.info connmand[1096]: eth1 {RX} 1 packets 328 bytes
  950. Mar 1 23:37:07 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  951. Mar 1 23:37:07 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  952. Mar 1 23:37:07 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  953. Mar 1 23:37:07 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  954. Mar 1 23:37:07 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  955. Mar 1 23:37:58 openelec daemon.info connmand[1096]: eth1 {RX} 2 packets 656 bytes
  956. Mar 1 23:37:58 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  957. Mar 1 23:37:58 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  958. Mar 1 23:37:58 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  959. Mar 1 23:37:58 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  960. Mar 1 23:37:58 openelec user.info kernel: [ 121.556969] asix 1-1.3:1.0 eth1: link down
  961. Mar 1 23:37:59 openelec daemon.info connmand[1096]: eth1 {RX} 2 packets 656 bytes
  962. Mar 1 23:37:59 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  963. Mar 1 23:37:59 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  964. Mar 1 23:37:59 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  965. Mar 1 23:37:59 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  966. Mar 1 23:37:59 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  967. Mar 1 23:40:24 openelec daemon.info connmand[1096]: eth1 {RX} 2 packets 656 bytes
  968. Mar 1 23:40:24 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  969. Mar 1 23:40:24 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  970. Mar 1 23:40:24 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  971. Mar 1 23:40:24 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  972. Mar 1 23:40:24 openelec user.info kernel: [ 267.984248] asix 1-1.3:1.0 eth1: link down
  973. Mar 1 23:40:25 openelec daemon.info connmand[1096]: eth1 {RX} 2 packets 656 bytes
  974. Mar 1 23:40:25 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  975. Mar 1 23:40:25 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  976. Mar 1 23:40:25 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  977. Mar 1 23:40:25 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  978. Mar 1 23:40:25 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  979. Mar 1 23:40:44 openelec daemon.info connmand[1096]: eth1 {RX} 2 packets 656 bytes
  980. Mar 1 23:40:44 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  981. Mar 1 23:40:44 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  982. Mar 1 23:40:44 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  983. Mar 1 23:40:44 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  984. Mar 1 23:40:44 openelec user.info kernel: [ 287.184632] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  985. Mar 1 23:40:45 openelec daemon.info connmand[1096]: eth1 {RX} 2 packets 656 bytes
  986. Mar 1 23:40:45 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  987. Mar 1 23:40:45 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  988. Mar 1 23:40:45 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  989. Mar 1 23:40:45 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  990. Mar 1 23:40:45 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  991. Mar 1 23:42:06 openelec daemon.info connmand[1096]: eth1 {RX} 3 packets 984 bytes
  992. Mar 1 23:42:06 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  993. Mar 1 23:42:06 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  994. Mar 1 23:42:06 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  995. Mar 1 23:42:06 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  996. Mar 1 23:42:06 openelec user.info kernel: [ 369.613933] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  997. Mar 1 23:42:07 openelec daemon.info connmand[1096]: eth1 {RX} 3 packets 984 bytes
  998. Mar 1 23:42:07 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  999. Mar 1 23:42:07 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1000. Mar 1 23:42:07 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1001. Mar 1 23:42:07 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1002. Mar 1 23:42:07 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1003. Mar 1 23:43:28 openelec daemon.info connmand[1096]: eth1 {RX} 5 packets 1640 bytes
  1004. Mar 1 23:43:28 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1005. Mar 1 23:43:28 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1006. Mar 1 23:43:28 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1007. Mar 1 23:43:28 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1008. Mar 1 23:43:28 openelec user.info kernel: [ 451.915239] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1009. Mar 1 23:43:29 openelec daemon.info connmand[1096]: eth1 {RX} 5 packets 1640 bytes
  1010. Mar 1 23:43:29 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1011. Mar 1 23:43:29 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1012. Mar 1 23:43:29 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1013. Mar 1 23:43:29 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1014. Mar 1 23:43:29 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1015. Mar 1 23:44:22 openelec daemon.info connmand[1096]: eth1 {RX} 6 packets 1968 bytes
  1016. Mar 1 23:44:22 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1017. Mar 1 23:44:22 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1018. Mar 1 23:44:22 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1019. Mar 1 23:44:22 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1020. Mar 1 23:44:22 openelec user.info kernel: [ 505.417667] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1021. Mar 1 23:44:23 openelec daemon.info connmand[1096]: eth1 {RX} 6 packets 1968 bytes
  1022. Mar 1 23:44:23 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1023. Mar 1 23:44:23 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1024. Mar 1 23:44:23 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1025. Mar 1 23:44:23 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1026. Mar 1 23:44:23 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1027. Mar 1 23:44:25 openelec daemon.info connmand[1096]: eth1 {RX} 6 packets 1968 bytes
  1028. Mar 1 23:44:25 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1029. Mar 1 23:44:25 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1030. Mar 1 23:44:25 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1031. Mar 1 23:44:25 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1032. Mar 1 23:44:25 openelec user.info kernel: [ 508.873298] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1033. Mar 1 23:44:26 openelec daemon.info connmand[1096]: eth1 {RX} 6 packets 1968 bytes
  1034. Mar 1 23:44:26 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1035. Mar 1 23:44:26 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1036. Mar 1 23:44:26 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1037. Mar 1 23:44:26 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1038. Mar 1 23:44:26 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1039. Mar 1 23:45:21 openelec daemon.info connmand[1096]: eth1 {RX} 6 packets 1968 bytes
  1040. Mar 1 23:45:21 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1041. Mar 1 23:45:21 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1042. Mar 1 23:45:21 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1043. Mar 1 23:45:21 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1044. Mar 1 23:45:21 openelec user.info kernel: [ 564.423626] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1045. Mar 1 23:45:22 openelec daemon.info connmand[1096]: eth1 {RX} 6 packets 1968 bytes
  1046. Mar 1 23:45:22 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1047. Mar 1 23:45:22 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1048. Mar 1 23:45:22 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1049. Mar 1 23:45:22 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1050. Mar 1 23:45:22 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1051. Mar 1 23:46:01 openelec daemon.info connmand[1096]: eth1 {RX} 6 packets 1968 bytes
  1052. Mar 1 23:46:01 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1053. Mar 1 23:46:01 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1054. Mar 1 23:46:01 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1055. Mar 1 23:46:01 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1056. Mar 1 23:46:01 openelec user.info kernel: [ 604.230326] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1057. Mar 1 23:46:02 openelec daemon.info connmand[1096]: eth1 {RX} 6 packets 1968 bytes
  1058. Mar 1 23:46:02 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1059. Mar 1 23:46:02 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1060. Mar 1 23:46:02 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1061. Mar 1 23:46:02 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1062. Mar 1 23:46:02 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1063. Mar 1 23:46:04 openelec daemon.info connmand[1096]: eth1 {RX} 6 packets 1968 bytes
  1064. Mar 1 23:46:04 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1065. Mar 1 23:46:04 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1066. Mar 1 23:46:04 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1067. Mar 1 23:46:04 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1068. Mar 1 23:46:04 openelec user.info kernel: [ 607.814210] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1069. Mar 1 23:46:05 openelec daemon.info connmand[1096]: eth1 {RX} 6 packets 1968 bytes
  1070. Mar 1 23:46:05 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1071. Mar 1 23:46:05 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1072. Mar 1 23:46:05 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1073. Mar 1 23:46:05 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1074. Mar 1 23:46:05 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1075. Mar 1 23:46:23 openelec daemon.info connmand[1096]: eth1 {RX} 6 packets 1968 bytes
  1076. Mar 1 23:46:23 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1077. Mar 1 23:46:23 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1078. Mar 1 23:46:23 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1079. Mar 1 23:46:23 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1080. Mar 1 23:46:23 openelec user.info kernel: [ 627.013586] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1081. Mar 1 23:46:24 openelec daemon.info connmand[1096]: eth1 {RX} 6 packets 1968 bytes
  1082. Mar 1 23:46:24 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1083. Mar 1 23:46:24 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1084. Mar 1 23:46:24 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1085. Mar 1 23:46:24 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1086. Mar 1 23:46:24 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1087. Mar 1 23:47:04 openelec daemon.info connmand[1096]: eth1 {RX} 6 packets 1968 bytes
  1088. Mar 1 23:47:04 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1089. Mar 1 23:47:04 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1090. Mar 1 23:47:04 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1091. Mar 1 23:47:04 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1092. Mar 1 23:47:04 openelec user.info kernel: [ 667.075410] asix 1-1.3:1.0 eth1: link down
  1093. Mar 1 23:47:05 openelec daemon.info connmand[1096]: eth1 {RX} 6 packets 1968 bytes
  1094. Mar 1 23:47:05 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1095. Mar 1 23:47:05 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1096. Mar 1 23:47:05 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1097. Mar 1 23:47:05 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1098. Mar 1 23:47:05 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1099. Mar 1 23:47:21 openelec daemon.info connmand[1096]: eth1 {RX} 7 packets 2296 bytes
  1100. Mar 1 23:47:21 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1101. Mar 1 23:47:21 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1102. Mar 1 23:47:21 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1103. Mar 1 23:47:21 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1104. Mar 1 23:47:21 openelec user.info kernel: [ 684.099449] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1105. Mar 1 23:47:22 openelec daemon.info connmand[1096]: eth1 {RX} 7 packets 2296 bytes
  1106. Mar 1 23:47:22 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1107. Mar 1 23:47:22 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1108. Mar 1 23:47:22 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1109. Mar 1 23:47:22 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1110. Mar 1 23:47:22 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1111. Mar 1 23:48:00 openelec daemon.info connmand[1096]: eth1 {RX} 8 packets 2624 bytes
  1112. Mar 1 23:48:00 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1113. Mar 1 23:48:00 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1114. Mar 1 23:48:00 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1115. Mar 1 23:48:00 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1116. Mar 1 23:48:00 openelec user.info kernel: [ 723.522293] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1117. Mar 1 23:48:01 openelec daemon.info connmand[1096]: eth1 {RX} 8 packets 2624 bytes
  1118. Mar 1 23:48:01 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1119. Mar 1 23:48:01 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1120. Mar 1 23:48:01 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1121. Mar 1 23:48:01 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1122. Mar 1 23:48:01 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1123. Mar 1 23:48:37 openelec daemon.info connmand[1096]: eth1 {RX} 8 packets 2624 bytes
  1124. Mar 1 23:48:37 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1125. Mar 1 23:48:37 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1126. Mar 1 23:48:37 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1127. Mar 1 23:48:37 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1128. Mar 1 23:48:37 openelec user.info kernel: [ 760.128978] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1129. Mar 1 23:48:38 openelec daemon.info connmand[1096]: eth1 {RX} 8 packets 2624 bytes
  1130. Mar 1 23:48:38 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1131. Mar 1 23:48:38 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1132. Mar 1 23:48:38 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1133. Mar 1 23:48:38 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1134. Mar 1 23:48:38 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1135. Mar 1 23:49:40 openelec daemon.info connmand[1096]: eth1 {RX} 8 packets 2624 bytes
  1136. Mar 1 23:49:40 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1137. Mar 1 23:49:40 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1138. Mar 1 23:49:40 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1139. Mar 1 23:49:40 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1140. Mar 1 23:49:40 openelec user.info kernel: [ 823.615201] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1141. Mar 1 23:49:41 openelec daemon.info connmand[1096]: eth1 {RX} 8 packets 2624 bytes
  1142. Mar 1 23:49:41 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1143. Mar 1 23:49:41 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1144. Mar 1 23:49:41 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1145. Mar 1 23:49:41 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1146. Mar 1 23:49:41 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1147. Mar 1 23:50:18 openelec daemon.info connmand[1096]: eth1 {RX} 8 packets 2624 bytes
  1148. Mar 1 23:50:18 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1149. Mar 1 23:50:18 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1150. Mar 1 23:50:18 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1151. Mar 1 23:50:18 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1152. Mar 1 23:50:18 openelec user.info kernel: [ 861.501812] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1153. Mar 1 23:50:19 openelec daemon.info connmand[1096]: eth1 {RX} 8 packets 2624 bytes
  1154. Mar 1 23:50:19 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1155. Mar 1 23:50:19 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1156. Mar 1 23:50:19 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1157. Mar 1 23:50:19 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1158. Mar 1 23:50:19 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1159. Mar 1 23:50:27 openelec daemon.info connmand[1096]: eth1 {RX} 8 packets 2624 bytes
  1160. Mar 1 23:50:27 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1161. Mar 1 23:50:27 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1162. Mar 1 23:50:27 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1163. Mar 1 23:50:27 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1164. Mar 1 23:50:27 openelec user.info kernel: [ 870.076657] asix 1-1.3:1.0 eth1: link down
  1165. Mar 1 23:50:28 openelec daemon.info connmand[1096]: eth1 {RX} 8 packets 2624 bytes
  1166. Mar 1 23:50:28 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1167. Mar 1 23:50:28 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1168. Mar 1 23:50:28 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1169. Mar 1 23:50:28 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1170. Mar 1 23:50:28 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1171. Mar 1 23:51:10 openelec daemon.info connmand[1096]: eth1 {RX} 8 packets 2624 bytes
  1172. Mar 1 23:51:10 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1173. Mar 1 23:51:10 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1174. Mar 1 23:51:10 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1175. Mar 1 23:51:10 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1176. Mar 1 23:51:10 openelec user.info kernel: [ 913.340003] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1177. Mar 1 23:51:11 openelec daemon.info connmand[1096]: eth1 {RX} 8 packets 2624 bytes
  1178. Mar 1 23:51:11 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1179. Mar 1 23:51:11 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1180. Mar 1 23:51:11 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1181. Mar 1 23:51:11 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1182. Mar 1 23:51:11 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1183. Mar 1 23:52:19 openelec daemon.info connmand[1096]: eth1 {RX} 8 packets 2624 bytes
  1184. Mar 1 23:52:19 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1185. Mar 1 23:52:19 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1186. Mar 1 23:52:19 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1187. Mar 1 23:52:19 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1188. Mar 1 23:52:19 openelec user.info kernel: [ 982.201906] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1189. Mar 1 23:52:20 openelec daemon.info connmand[1096]: eth1 {RX} 8 packets 2624 bytes
  1190. Mar 1 23:52:20 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1191. Mar 1 23:52:20 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1192. Mar 1 23:52:20 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1193. Mar 1 23:52:20 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1194. Mar 1 23:52:20 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1195. Mar 1 23:53:03 openelec daemon.info connmand[1096]: eth1 {RX} 9 packets 2952 bytes
  1196. Mar 1 23:53:03 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1197. Mar 1 23:53:03 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1198. Mar 1 23:53:03 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1199. Mar 1 23:53:03 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1200. Mar 1 23:53:03 openelec user.info kernel: [ 1026.231745] asix 1-1.3:1.0 eth1: link down
  1201. Mar 1 23:53:04 openelec daemon.info connmand[1096]: eth1 {RX} 9 packets 2952 bytes
  1202. Mar 1 23:53:04 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1203. Mar 1 23:53:04 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1204. Mar 1 23:53:04 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1205. Mar 1 23:53:04 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1206. Mar 1 23:53:04 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1207. Mar 1 23:53:10 openelec daemon.info connmand[1096]: ntp: time slew +0.003462 s
  1208. Mar 1 23:53:57 openelec daemon.info connmand[1096]: eth1 {RX} 10 packets 3280 bytes
  1209. Mar 1 23:53:57 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1210. Mar 1 23:53:57 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1211. Mar 1 23:53:57 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1212. Mar 1 23:53:57 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1213. Mar 1 23:53:57 openelec user.info kernel: [ 1080.245831] asix 1-1.3:1.0 eth1: link down
  1214. Mar 1 23:53:58 openelec daemon.info connmand[1096]: eth1 {RX} 10 packets 3280 bytes
  1215. Mar 1 23:53:58 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1216. Mar 1 23:53:58 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1217. Mar 1 23:53:58 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1218. Mar 1 23:53:58 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1219. Mar 1 23:53:58 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1220. Mar 1 23:54:27 openelec daemon.info connmand[1096]: eth1 {RX} 10 packets 3280 bytes
  1221. Mar 1 23:54:27 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1222. Mar 1 23:54:27 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1223. Mar 1 23:54:27 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1224. Mar 1 23:54:27 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1225. Mar 1 23:54:27 openelec user.info kernel: [ 1110.452998] asix 1-1.3:1.0 eth1: link down
  1226. Mar 1 23:54:28 openelec daemon.info connmand[1096]: eth1 {RX} 10 packets 3280 bytes
  1227. Mar 1 23:54:28 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1228. Mar 1 23:54:28 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1229. Mar 1 23:54:28 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1230. Mar 1 23:54:28 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1231. Mar 1 23:54:28 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1232. Mar 1 23:55:19 openelec daemon.info connmand[1096]: eth1 {RX} 10 packets 3280 bytes
  1233. Mar 1 23:55:19 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1234. Mar 1 23:55:19 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1235. Mar 1 23:55:19 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1236. Mar 1 23:55:19 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1237. Mar 1 23:55:19 openelec user.info kernel: [ 1162.932018] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1238. Mar 1 23:55:20 openelec daemon.info connmand[1096]: eth1 {RX} 10 packets 3280 bytes
  1239. Mar 1 23:55:20 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1240. Mar 1 23:55:20 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1241. Mar 1 23:55:20 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1242. Mar 1 23:55:20 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1243. Mar 1 23:55:20 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1244. Mar 1 23:56:10 openelec daemon.info connmand[1096]: eth1 {RX} 10 packets 3280 bytes
  1245. Mar 1 23:56:10 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1246. Mar 1 23:56:10 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1247. Mar 1 23:56:10 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1248. Mar 1 23:56:10 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1249. Mar 1 23:56:10 openelec user.info kernel: [ 1213.361667] asix 1-1.3:1.0 eth1: link down
  1250. Mar 1 23:56:11 openelec daemon.info connmand[1096]: eth1 {RX} 10 packets 3280 bytes
  1251. Mar 1 23:56:11 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1252. Mar 1 23:56:11 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1253. Mar 1 23:56:11 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1254. Mar 1 23:56:11 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1255. Mar 1 23:56:11 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1256. Mar 1 23:57:55 openelec daemon.info connmand[1096]: eth1 {RX} 11 packets 3608 bytes
  1257. Mar 1 23:57:55 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1258. Mar 1 23:57:55 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1259. Mar 1 23:57:55 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1260. Mar 1 23:57:55 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1261. Mar 1 23:57:55 openelec user.info kernel: [ 1318.958953] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1262. Mar 1 23:57:56 openelec daemon.info connmand[1096]: eth1 {RX} 11 packets 3608 bytes
  1263. Mar 1 23:57:56 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1264. Mar 1 23:57:56 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1265. Mar 1 23:57:56 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1266. Mar 1 23:57:56 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1267. Mar 1 23:57:56 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1268. Mar 2 00:01:30 openelec daemon.info connmand[1096]: eth1 {RX} 16 packets 5248 bytes
  1269. Mar 2 00:01:30 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1270. Mar 2 00:01:30 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1271. Mar 2 00:01:30 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1272. Mar 2 00:01:30 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1273. Mar 2 00:01:30 openelec user.info kernel: [ 1533.864373] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1274. Mar 2 00:01:32 openelec daemon.info connmand[1096]: eth1 {RX} 16 packets 5248 bytes
  1275. Mar 2 00:01:32 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1276. Mar 2 00:01:32 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1277. Mar 2 00:01:32 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1278. Mar 2 00:01:32 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1279. Mar 2 00:01:32 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1280. Mar 2 00:02:16 openelec daemon.info connmand[1096]: eth1 {RX} 16 packets 5248 bytes
  1281. Mar 2 00:02:16 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1282. Mar 2 00:02:16 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1283. Mar 2 00:02:16 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1284. Mar 2 00:02:16 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1285. Mar 2 00:02:16 openelec user.info kernel: [ 1579.045790] asix 1-1.3:1.0 eth1: link down
  1286. Mar 2 00:02:17 openelec daemon.info connmand[1096]: eth1 {RX} 16 packets 5248 bytes
  1287. Mar 2 00:02:17 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1288. Mar 2 00:02:17 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1289. Mar 2 00:02:17 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1290. Mar 2 00:02:17 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1291. Mar 2 00:02:17 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1292. Mar 2 00:02:28 openelec daemon.info connmand[1096]: eth1 {RX} 17 packets 5576 bytes
  1293. Mar 2 00:02:28 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1294. Mar 2 00:02:28 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1295. Mar 2 00:02:28 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1296. Mar 2 00:02:28 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1297. Mar 2 00:02:28 openelec user.info kernel: [ 1591.205512] asix 1-1.3:1.0 eth1: link down
  1298. Mar 2 00:02:29 openelec daemon.info connmand[1096]: eth1 {RX} 17 packets 5576 bytes
  1299. Mar 2 00:02:29 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1300. Mar 2 00:02:29 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1301. Mar 2 00:02:29 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1302. Mar 2 00:02:29 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1303. Mar 2 00:02:29 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1304. Mar 2 00:03:27 openelec daemon.info connmand[1096]: eth1 {RX} 17 packets 5576 bytes
  1305. Mar 2 00:03:27 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1306. Mar 2 00:03:27 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1307. Mar 2 00:03:27 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1308. Mar 2 00:03:27 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1309. Mar 2 00:03:27 openelec user.info kernel: [ 1650.979417] asix 1-1.3:1.0 eth1: link down
  1310. Mar 2 00:03:28 openelec daemon.info connmand[1096]: eth1 {RX} 17 packets 5576 bytes
  1311. Mar 2 00:03:28 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1312. Mar 2 00:03:28 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1313. Mar 2 00:03:28 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1314. Mar 2 00:03:28 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1315. Mar 2 00:03:28 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1316. Mar 2 00:03:38 openelec daemon.info connmand[1096]: eth1 {RX} 17 packets 5576 bytes
  1317. Mar 2 00:03:38 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1318. Mar 2 00:03:38 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1319. Mar 2 00:03:38 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1320. Mar 2 00:03:38 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1321. Mar 2 00:03:38 openelec user.info kernel: [ 1661.474988] asix 1-1.3:1.0 eth1: link down
  1322. Mar 2 00:03:39 openelec daemon.info connmand[1096]: eth1 {RX} 17 packets 5576 bytes
  1323. Mar 2 00:03:39 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1324. Mar 2 00:03:39 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1325. Mar 2 00:03:39 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1326. Mar 2 00:03:39 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1327. Mar 2 00:03:39 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1328. Mar 2 00:03:55 openelec daemon.info connmand[1096]: eth1 {RX} 17 packets 5576 bytes
  1329. Mar 2 00:03:55 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1330. Mar 2 00:03:55 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1331. Mar 2 00:03:55 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1332. Mar 2 00:03:55 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1333. Mar 2 00:03:55 openelec user.info kernel: [ 1679.011134] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1334. Mar 2 00:03:56 openelec daemon.info connmand[1096]: eth1 {RX} 17 packets 5576 bytes
  1335. Mar 2 00:03:56 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1336. Mar 2 00:03:56 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1337. Mar 2 00:03:56 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1338. Mar 2 00:03:56 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1339. Mar 2 00:03:56 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1340. Mar 2 00:04:48 openelec daemon.info connmand[1096]: eth1 {RX} 17 packets 5576 bytes
  1341. Mar 2 00:04:48 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1342. Mar 2 00:04:48 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1343. Mar 2 00:04:48 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1344. Mar 2 00:04:48 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1345. Mar 2 00:04:48 openelec user.info kernel: [ 1732.001421] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1346. Mar 2 00:04:49 openelec daemon.info connmand[1096]: eth1 {RX} 17 packets 5576 bytes
  1347. Mar 2 00:04:49 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1348. Mar 2 00:04:49 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1349. Mar 2 00:04:49 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1350. Mar 2 00:04:49 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1351. Mar 2 00:04:49 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1352. Mar 2 00:08:19 openelec daemon.info connmand[1096]: eth1 {RX} 17 packets 5576 bytes
  1353. Mar 2 00:08:19 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1354. Mar 2 00:08:19 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1355. Mar 2 00:08:19 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1356. Mar 2 00:08:19 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1357. Mar 2 00:08:19 openelec user.info kernel: [ 1942.042883] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1358. Mar 2 00:08:20 openelec daemon.info connmand[1096]: eth1 {RX} 18 packets 5904 bytes
  1359. Mar 2 00:08:20 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1360. Mar 2 00:08:20 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1361. Mar 2 00:08:20 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1362. Mar 2 00:08:20 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1363. Mar 2 00:08:20 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1364. Mar 2 00:08:37 openelec daemon.info connmand[1096]: eth1 {RX} 18 packets 5904 bytes
  1365. Mar 2 00:08:37 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1366. Mar 2 00:08:37 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1367. Mar 2 00:08:37 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1368. Mar 2 00:08:37 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1369. Mar 2 00:08:37 openelec user.info kernel: [ 1960.729393] asix 1-1.3:1.0 eth1: link down
  1370. Mar 2 00:08:38 openelec daemon.info connmand[1096]: eth1 {RX} 18 packets 5904 bytes
  1371. Mar 2 00:08:38 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1372. Mar 2 00:08:38 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1373. Mar 2 00:08:38 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1374. Mar 2 00:08:38 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1375. Mar 2 00:08:38 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1376. Mar 2 00:09:46 openelec daemon.info connmand[1096]: eth1 {RX} 18 packets 5904 bytes
  1377. Mar 2 00:09:46 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1378. Mar 2 00:09:46 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1379. Mar 2 00:09:46 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1380. Mar 2 00:09:46 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1381. Mar 2 00:09:46 openelec user.info kernel: [ 2029.335146] asix 1-1.3:1.0 eth1: link down
  1382. Mar 2 00:09:47 openelec daemon.info connmand[1096]: eth1 {RX} 18 packets 5904 bytes
  1383. Mar 2 00:09:47 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1384. Mar 2 00:09:47 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1385. Mar 2 00:09:47 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1386. Mar 2 00:09:47 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1387. Mar 2 00:09:47 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1388. Mar 2 00:10:14 openelec daemon.info connmand[1096]: ntp: time slew +0.004350 s
  1389. Mar 2 00:10:52 openelec daemon.info connmand[1096]: eth1 {RX} 19 packets 6232 bytes
  1390. Mar 2 00:10:52 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1391. Mar 2 00:10:52 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1392. Mar 2 00:10:52 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1393. Mar 2 00:10:52 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1394. Mar 2 00:10:52 openelec user.info kernel: [ 2095.253737] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1395. Mar 2 00:10:53 openelec daemon.info connmand[1096]: eth1 {RX} 19 packets 6232 bytes
  1396. Mar 2 00:10:53 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1397. Mar 2 00:10:53 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1398. Mar 2 00:10:53 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1399. Mar 2 00:10:53 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1400. Mar 2 00:10:53 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1401. Mar 2 00:11:11 openelec daemon.info connmand[1096]: eth1 {RX} 19 packets 6232 bytes
  1402. Mar 2 00:11:11 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1403. Mar 2 00:11:11 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1404. Mar 2 00:11:11 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1405. Mar 2 00:11:11 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1406. Mar 2 00:11:11 openelec user.info kernel: [ 2114.196408] asix 1-1.3:1.0 eth1: link down
  1407. Mar 2 00:11:12 openelec daemon.info connmand[1096]: eth1 {RX} 19 packets 6232 bytes
  1408. Mar 2 00:11:12 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1409. Mar 2 00:11:12 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1410. Mar 2 00:11:12 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1411. Mar 2 00:11:12 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1412. Mar 2 00:11:12 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1413. Mar 2 00:12:30 openelec daemon.info connmand[1096]: eth1 {RX} 19 packets 6232 bytes
  1414. Mar 2 00:12:30 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1415. Mar 2 00:12:30 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1416. Mar 2 00:12:30 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1417. Mar 2 00:12:30 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1418. Mar 2 00:12:30 openelec user.info kernel: [ 2193.810543] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1419. Mar 2 00:12:31 openelec daemon.info connmand[1096]: eth1 {RX} 19 packets 6232 bytes
  1420. Mar 2 00:12:31 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1421. Mar 2 00:12:31 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1422. Mar 2 00:12:31 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1423. Mar 2 00:12:31 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1424. Mar 2 00:12:31 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1425. Mar 2 00:12:41 openelec daemon.info connmand[1096]: eth1 {RX} 19 packets 6232 bytes
  1426. Mar 2 00:12:41 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1427. Mar 2 00:12:41 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1428. Mar 2 00:12:41 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1429. Mar 2 00:12:41 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1430. Mar 2 00:12:41 openelec user.info kernel: [ 2204.562316] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1431. Mar 2 00:12:43 openelec daemon.info connmand[1096]: eth1 {RX} 19 packets 6232 bytes
  1432. Mar 2 00:12:43 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1433. Mar 2 00:12:43 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1434. Mar 2 00:12:43 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1435. Mar 2 00:12:43 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1436. Mar 2 00:12:43 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1437. Mar 2 00:13:45 openelec daemon.info connmand[1096]: eth1 {RX} 19 packets 6232 bytes
  1438. Mar 2 00:13:45 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1439. Mar 2 00:13:45 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1440. Mar 2 00:13:45 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1441. Mar 2 00:13:45 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1442. Mar 2 00:13:45 openelec user.info kernel: [ 2268.048287] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1443. Mar 2 00:13:46 openelec daemon.info connmand[1096]: eth1 {RX} 19 packets 6232 bytes
  1444. Mar 2 00:13:46 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1445. Mar 2 00:13:46 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1446. Mar 2 00:13:46 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1447. Mar 2 00:13:46 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1448. Mar 2 00:13:46 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1449. Mar 2 00:13:55 openelec daemon.info connmand[1096]: eth1 {RX} 19 packets 6232 bytes
  1450. Mar 2 00:13:55 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1451. Mar 2 00:13:55 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1452. Mar 2 00:13:55 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1453. Mar 2 00:13:55 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1454. Mar 2 00:13:55 openelec user.info kernel: [ 2278.798918] asix 1-1.3:1.0 eth1: link down
  1455. Mar 2 00:13:56 openelec daemon.info connmand[1096]: eth1 {RX} 19 packets 6232 bytes
  1456. Mar 2 00:13:56 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1457. Mar 2 00:13:56 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1458. Mar 2 00:13:56 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1459. Mar 2 00:13:56 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1460. Mar 2 00:13:56 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1461. Mar 2 00:14:39 openelec daemon.info connmand[1096]: eth1 {RX} 19 packets 6232 bytes
  1462. Mar 2 00:14:39 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1463. Mar 2 00:14:39 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1464. Mar 2 00:14:39 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1465. Mar 2 00:14:39 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1466. Mar 2 00:14:39 openelec user.info kernel: [ 2322.574231] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1467. Mar 2 00:14:40 openelec daemon.info connmand[1096]: eth1 {RX} 19 packets 6232 bytes
  1468. Mar 2 00:14:40 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1469. Mar 2 00:14:40 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1470. Mar 2 00:14:40 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1471. Mar 2 00:14:40 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1472. Mar 2 00:14:40 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1473. Mar 2 00:15:35 openelec daemon.info connmand[1096]: eth1 {RX} 19 packets 6232 bytes
  1474. Mar 2 00:15:35 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1475. Mar 2 00:15:35 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1476. Mar 2 00:15:35 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1477. Mar 2 00:15:35 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1478. Mar 2 00:15:35 openelec user.info kernel: [ 2378.252673] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1479. Mar 2 00:15:36 openelec daemon.info connmand[1096]: eth1 {RX} 19 packets 6232 bytes
  1480. Mar 2 00:15:36 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1481. Mar 2 00:15:36 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1482. Mar 2 00:15:36 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1483. Mar 2 00:15:36 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1484. Mar 2 00:15:36 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1485. Mar 2 00:17:09 openelec daemon.info connmand[1096]: eth1 {RX} 20 packets 6560 bytes
  1486. Mar 2 00:17:09 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1487. Mar 2 00:17:09 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1488. Mar 2 00:17:09 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1489. Mar 2 00:17:09 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1490. Mar 2 00:17:09 openelec user.info kernel: [ 2472.585643] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1491. Mar 2 00:17:10 openelec daemon.info connmand[1096]: eth1 {RX} 20 packets 6560 bytes
  1492. Mar 2 00:17:10 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1493. Mar 2 00:17:10 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1494. Mar 2 00:17:10 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1495. Mar 2 00:17:10 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1496. Mar 2 00:17:10 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1497. Mar 2 00:17:21 openelec daemon.info connmand[1096]: eth1 {RX} 21 packets 6888 bytes
  1498. Mar 2 00:17:21 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1499. Mar 2 00:17:21 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1500. Mar 2 00:17:21 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1501. Mar 2 00:17:21 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1502. Mar 2 00:17:21 openelec user.info kernel: [ 2485.001082] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1503. Mar 2 00:17:22 openelec daemon.info connmand[1096]: eth1 {RX} 21 packets 6888 bytes
  1504. Mar 2 00:17:22 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1505. Mar 2 00:17:22 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1506. Mar 2 00:17:22 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1507. Mar 2 00:17:22 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1508. Mar 2 00:17:22 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1509. Mar 2 00:20:07 openelec daemon.info connmand[1096]: eth1 {RX} 22 packets 7216 bytes
  1510. Mar 2 00:20:07 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1511. Mar 2 00:20:07 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1512. Mar 2 00:20:07 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1513. Mar 2 00:20:07 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1514. Mar 2 00:20:07 openelec user.info kernel: [ 2650.243714] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1515. Mar 2 00:20:09 openelec daemon.info connmand[1096]: eth1 {RX} 22 packets 7216 bytes
  1516. Mar 2 00:20:09 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1517. Mar 2 00:20:09 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1518. Mar 2 00:20:09 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1519. Mar 2 00:20:09 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1520. Mar 2 00:20:09 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1521. Mar 2 00:22:04 openelec daemon.info connmand[1096]: eth1 {RX} 23 packets 7544 bytes
  1522. Mar 2 00:22:04 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1523. Mar 2 00:22:04 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1524. Mar 2 00:22:04 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1525. Mar 2 00:22:04 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1526. Mar 2 00:22:05 openelec user.info kernel: [ 2767.999889] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1527. Mar 2 00:22:06 openelec daemon.info connmand[1096]: eth1 {RX} 23 packets 7544 bytes
  1528. Mar 2 00:22:06 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1529. Mar 2 00:22:06 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1530. Mar 2 00:22:06 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1531. Mar 2 00:22:06 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1532. Mar 2 00:22:06 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1533. Mar 2 00:22:13 openelec daemon.info connmand[1096]: eth1 {RX} 23 packets 7544 bytes
  1534. Mar 2 00:22:13 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1535. Mar 2 00:22:13 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1536. Mar 2 00:22:13 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1537. Mar 2 00:22:13 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1538. Mar 2 00:22:13 openelec user.info kernel: [ 2776.574770] asix 1-1.3:1.0 eth1: link down
  1539. Mar 2 00:22:14 openelec daemon.info connmand[1096]: eth1 {RX} 23 packets 7544 bytes
  1540. Mar 2 00:22:14 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1541. Mar 2 00:22:14 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1542. Mar 2 00:22:14 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1543. Mar 2 00:22:14 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1544. Mar 2 00:22:14 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1545. Mar 2 00:22:56 openelec daemon.info connmand[1096]: eth1 {RX} 24 packets 7872 bytes
  1546. Mar 2 00:22:56 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1547. Mar 2 00:22:56 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1548. Mar 2 00:22:56 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1549. Mar 2 00:22:56 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1550. Mar 2 00:22:56 openelec user.info kernel: [ 2819.966203] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1551. Mar 2 00:22:57 openelec daemon.info connmand[1096]: eth1 {RX} 24 packets 7872 bytes
  1552. Mar 2 00:22:57 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1553. Mar 2 00:22:57 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1554. Mar 2 00:22:57 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1555. Mar 2 00:22:57 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1556. Mar 2 00:22:57 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1557. Mar 2 00:25:08 openelec daemon.info connmand[1096]: eth1 {RX} 25 packets 8200 bytes
  1558. Mar 2 00:25:08 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1559. Mar 2 00:25:08 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1560. Mar 2 00:25:08 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1561. Mar 2 00:25:08 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1562. Mar 2 00:25:08 openelec user.info kernel: [ 2951.545213] asix 1-1.3:1.0 eth1: link down
  1563. Mar 2 00:25:09 openelec daemon.info connmand[1096]: eth1 {RX} 25 packets 8200 bytes
  1564. Mar 2 00:25:09 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1565. Mar 2 00:25:09 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1566. Mar 2 00:25:09 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1567. Mar 2 00:25:09 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1568. Mar 2 00:25:09 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1569. Mar 2 00:25:40 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1570. Mar 2 00:25:40 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1571. Mar 2 00:25:40 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1572. Mar 2 00:25:40 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1573. Mar 2 00:25:40 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1574. Mar 2 00:25:40 openelec user.info kernel: [ 2983.160775] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1575. Mar 2 00:25:41 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1576. Mar 2 00:25:41 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1577. Mar 2 00:25:41 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1578. Mar 2 00:25:41 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1579. Mar 2 00:25:41 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1580. Mar 2 00:25:41 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1581. Mar 2 00:26:03 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1582. Mar 2 00:26:03 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1583. Mar 2 00:26:03 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1584. Mar 2 00:26:03 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1585. Mar 2 00:26:03 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1586. Mar 2 00:26:03 openelec user.info kernel: [ 3006.072157] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1587. Mar 2 00:26:04 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1588. Mar 2 00:26:04 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1589. Mar 2 00:26:04 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1590. Mar 2 00:26:04 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1591. Mar 2 00:26:04 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1592. Mar 2 00:26:04 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1593. Mar 2 00:26:37 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1594. Mar 2 00:26:37 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1595. Mar 2 00:26:37 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1596. Mar 2 00:26:37 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1597. Mar 2 00:26:37 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1598. Mar 2 00:26:37 openelec user.info kernel: [ 3040.887024] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1599. Mar 2 00:26:38 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1600. Mar 2 00:26:38 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1601. Mar 2 00:26:38 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1602. Mar 2 00:26:38 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1603. Mar 2 00:26:38 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1604. Mar 2 00:26:38 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1605. Mar 2 00:27:07 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1606. Mar 2 00:27:07 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1607. Mar 2 00:27:07 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1608. Mar 2 00:27:07 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1609. Mar 2 00:27:07 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1610. Mar 2 00:27:07 openelec user.info kernel: [ 3070.581471] asix 1-1.3:1.0 eth1: link down
  1611. Mar 2 00:27:08 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1612. Mar 2 00:27:08 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1613. Mar 2 00:27:08 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1614. Mar 2 00:27:08 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1615. Mar 2 00:27:08 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1616. Mar 2 00:27:08 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1617. Mar 2 00:27:18 openelec daemon.info connmand[1096]: ntp: time slew +0.003827 s
  1618. Mar 2 00:27:40 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1619. Mar 2 00:27:40 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1620. Mar 2 00:27:40 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1621. Mar 2 00:27:40 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1622. Mar 2 00:27:40 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1623. Mar 2 00:27:40 openelec user.info kernel: [ 3103.476991] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1624. Mar 2 00:27:41 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1625. Mar 2 00:27:41 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1626. Mar 2 00:27:41 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1627. Mar 2 00:27:41 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1628. Mar 2 00:27:41 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1629. Mar 2 00:27:41 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1630. Mar 2 00:27:44 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1631. Mar 2 00:27:44 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1632. Mar 2 00:27:44 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1633. Mar 2 00:27:44 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1634. Mar 2 00:27:44 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1635. Mar 2 00:27:44 openelec user.info kernel: [ 3107.061036] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1636. Mar 2 00:27:45 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1637. Mar 2 00:27:45 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1638. Mar 2 00:27:45 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1639. Mar 2 00:27:45 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1640. Mar 2 00:27:45 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1641. Mar 2 00:27:45 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1642. Mar 2 00:29:13 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1643. Mar 2 00:29:13 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1644. Mar 2 00:29:13 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1645. Mar 2 00:29:13 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1646. Mar 2 00:29:13 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1647. Mar 2 00:29:13 openelec user.info kernel: [ 3196.658088] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1648. Mar 2 00:29:14 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1649. Mar 2 00:29:14 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1650. Mar 2 00:29:14 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1651. Mar 2 00:29:14 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1652. Mar 2 00:29:14 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1653. Mar 2 00:29:14 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1654. Mar 2 00:29:49 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1655. Mar 2 00:29:49 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1656. Mar 2 00:29:49 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1657. Mar 2 00:29:49 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1658. Mar 2 00:29:49 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1659. Mar 2 00:29:49 openelec user.info kernel: [ 3232.368966] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1660. Mar 2 00:29:50 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1661. Mar 2 00:29:50 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1662. Mar 2 00:29:50 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1663. Mar 2 00:29:50 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1664. Mar 2 00:29:50 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1665. Mar 2 00:29:50 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1666. Mar 2 00:31:03 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1667. Mar 2 00:31:03 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1668. Mar 2 00:31:03 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1669. Mar 2 00:31:03 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1670. Mar 2 00:31:03 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1671. Mar 2 00:31:03 openelec user.info kernel: [ 3306.478541] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1672. Mar 2 00:31:04 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1673. Mar 2 00:31:04 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1674. Mar 2 00:31:04 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1675. Mar 2 00:31:04 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1676. Mar 2 00:31:04 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1677. Mar 2 00:31:04 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1678. Mar 2 00:32:11 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1679. Mar 2 00:32:11 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1680. Mar 2 00:32:11 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1681. Mar 2 00:32:11 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1682. Mar 2 00:32:11 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1683. Mar 2 00:32:11 openelec user.info kernel: [ 3374.699311] asix 1-1.3:1.0 eth1: link down
  1684. Mar 2 00:32:12 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1685. Mar 2 00:32:12 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1686. Mar 2 00:32:12 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1687. Mar 2 00:32:12 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1688. Mar 2 00:32:12 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1689. Mar 2 00:32:12 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1690. Mar 2 00:34:01 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1691. Mar 2 00:34:01 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1692. Mar 2 00:34:01 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1693. Mar 2 00:34:01 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1694. Mar 2 00:34:01 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1695. Mar 2 00:34:01 openelec user.info kernel: [ 3484.775893] asix 1-1.3:1.0 eth1: link down
  1696. Mar 2 00:34:02 openelec daemon.info connmand[1096]: eth1 {RX} 26 packets 8528 bytes
  1697. Mar 2 00:34:02 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1698. Mar 2 00:34:02 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1699. Mar 2 00:34:02 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1700. Mar 2 00:34:02 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1701. Mar 2 00:34:02 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1702. Mar 2 00:35:37 openelec daemon.info connmand[1096]: eth1 {RX} 30 packets 9840 bytes
  1703. Mar 2 00:35:37 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1704. Mar 2 00:35:37 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1705. Mar 2 00:35:37 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1706. Mar 2 00:35:37 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1707. Mar 2 00:35:37 openelec user.info kernel: [ 3580.773491] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1708. Mar 2 00:35:38 openelec daemon.info connmand[1096]: eth1 {RX} 30 packets 9840 bytes
  1709. Mar 2 00:35:38 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1710. Mar 2 00:35:38 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1711. Mar 2 00:35:38 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1712. Mar 2 00:35:38 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1713. Mar 2 00:35:38 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1714. Mar 2 00:36:42 openelec daemon.info connmand[1096]: eth1 {RX} 32 packets 10496 bytes
  1715. Mar 2 00:36:42 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1716. Mar 2 00:36:42 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1717. Mar 2 00:36:42 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1718. Mar 2 00:36:42 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1719. Mar 2 00:36:42 openelec user.info kernel: [ 3645.539673] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1720. Mar 2 00:36:43 openelec daemon.info connmand[1096]: eth1 {RX} 32 packets 10496 bytes
  1721. Mar 2 00:36:43 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1722. Mar 2 00:36:43 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1723. Mar 2 00:36:43 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1724. Mar 2 00:36:43 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1725. Mar 2 00:36:43 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1726. Mar 2 00:38:00 openelec daemon.info connmand[1096]: eth1 {RX} 32 packets 10496 bytes
  1727. Mar 2 00:38:00 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1728. Mar 2 00:38:00 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1729. Mar 2 00:38:00 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1730. Mar 2 00:38:00 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1731. Mar 2 00:38:00 openelec user.info kernel: [ 3722.976873] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1732. Mar 2 00:38:01 openelec daemon.info connmand[1096]: eth1 {RX} 32 packets 10496 bytes
  1733. Mar 2 00:38:01 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1734. Mar 2 00:38:01 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1735. Mar 2 00:38:01 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1736. Mar 2 00:38:01 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1737. Mar 2 00:38:01 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1738. Mar 2 00:40:16 openelec daemon.info connmand[1096]: eth1 {RX} 34 packets 11152 bytes
  1739. Mar 2 00:40:16 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1740. Mar 2 00:40:16 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1741. Mar 2 00:40:16 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1742. Mar 2 00:40:16 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1743. Mar 2 00:40:16 openelec user.info kernel: [ 3859.163722] asix 1-1.3:1.0 eth1: link down
  1744. Mar 2 00:40:17 openelec daemon.info connmand[1096]: eth1 {RX} 34 packets 11152 bytes
  1745. Mar 2 00:40:17 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1746. Mar 2 00:40:17 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1747. Mar 2 00:40:17 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1748. Mar 2 00:40:17 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1749. Mar 2 00:40:17 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1750. Mar 2 00:42:10 openelec daemon.info connmand[1096]: eth1 {RX} 35 packets 11480 bytes
  1751. Mar 2 00:42:10 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1752. Mar 2 00:42:10 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1753. Mar 2 00:42:10 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1754. Mar 2 00:42:10 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1755. Mar 2 00:42:10 openelec user.info kernel: [ 3973.720611] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1756. Mar 2 00:42:11 openelec daemon.info connmand[1096]: eth1 {RX} 35 packets 11480 bytes
  1757. Mar 2 00:42:11 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1758. Mar 2 00:42:11 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1759. Mar 2 00:42:11 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1760. Mar 2 00:42:11 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1761. Mar 2 00:42:11 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1762. Mar 2 00:42:24 openelec daemon.info connmand[1096]: eth1 {RX} 35 packets 11480 bytes
  1763. Mar 2 00:42:24 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1764. Mar 2 00:42:24 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1765. Mar 2 00:42:24 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1766. Mar 2 00:42:24 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1767. Mar 2 00:42:24 openelec user.info kernel: [ 3987.544280] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1768. Mar 2 00:42:25 openelec daemon.info connmand[1096]: eth1 {RX} 35 packets 11480 bytes
  1769. Mar 2 00:42:25 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1770. Mar 2 00:42:25 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1771. Mar 2 00:42:25 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1772. Mar 2 00:42:25 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1773. Mar 2 00:42:25 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1774. Mar 2 00:42:28 openelec daemon.info connmand[1096]: eth1 {RX} 35 packets 11480 bytes
  1775. Mar 2 00:42:28 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1776. Mar 2 00:42:28 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1777. Mar 2 00:42:28 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1778. Mar 2 00:42:28 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1779. Mar 2 00:42:28 openelec user.info kernel: [ 3991.127330] asix 1-1.3:1.0 eth1: link down
  1780. Mar 2 00:42:29 openelec daemon.info connmand[1096]: eth1 {RX} 35 packets 11480 bytes
  1781. Mar 2 00:42:29 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1782. Mar 2 00:42:29 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1783. Mar 2 00:42:29 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1784. Mar 2 00:42:29 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1785. Mar 2 00:42:29 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1786. Mar 2 00:43:44 openelec daemon.info connmand[1096]: eth1 {RX} 37 packets 12136 bytes
  1787. Mar 2 00:43:44 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1788. Mar 2 00:43:44 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1789. Mar 2 00:43:44 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1790. Mar 2 00:43:44 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1791. Mar 2 00:43:44 openelec user.info kernel: [ 4067.925670] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1792. Mar 2 00:43:45 openelec daemon.info connmand[1096]: eth1 {RX} 37 packets 12136 bytes
  1793. Mar 2 00:43:45 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1794. Mar 2 00:43:45 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1795. Mar 2 00:43:45 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1796. Mar 2 00:43:45 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1797. Mar 2 00:43:45 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1798. Mar 2 00:44:22 openelec daemon.info connmand[1096]: ntp: time slew +0.002590 s
  1799. Mar 2 00:45:02 openelec daemon.info connmand[1096]: eth1 {RX} 38 packets 12464 bytes
  1800. Mar 2 00:45:02 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1801. Mar 2 00:45:02 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1802. Mar 2 00:45:02 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1803. Mar 2 00:45:02 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1804. Mar 2 00:45:02 openelec user.info kernel: [ 4145.619147] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1805. Mar 2 00:45:03 openelec daemon.info connmand[1096]: eth1 {RX} 38 packets 12464 bytes
  1806. Mar 2 00:45:03 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1807. Mar 2 00:45:03 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1808. Mar 2 00:45:03 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1809. Mar 2 00:45:03 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1810. Mar 2 00:45:03 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1811. Mar 2 00:45:49 openelec daemon.info connmand[1096]: eth1 {RX} 38 packets 12464 bytes
  1812. Mar 2 00:45:49 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1813. Mar 2 00:45:49 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1814. Mar 2 00:45:49 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1815. Mar 2 00:45:49 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1816. Mar 2 00:45:49 openelec user.info kernel: [ 4192.721775] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1817. Mar 2 00:45:50 openelec daemon.info connmand[1096]: eth1 {RX} 38 packets 12464 bytes
  1818. Mar 2 00:45:50 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1819. Mar 2 00:45:50 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1820. Mar 2 00:45:50 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1821. Mar 2 00:45:50 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1822. Mar 2 00:45:50 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1823. Mar 2 00:47:49 openelec daemon.info connmand[1096]: eth1 {RX} 38 packets 12464 bytes
  1824. Mar 2 00:47:49 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1825. Mar 2 00:47:49 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1826. Mar 2 00:47:49 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1827. Mar 2 00:47:49 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1828. Mar 2 00:47:49 openelec user.info kernel: [ 4312.908997] asix 1-1.3:1.0 eth1: link down
  1829. Mar 2 00:47:50 openelec daemon.info connmand[1096]: eth1 {RX} 38 packets 12464 bytes
  1830. Mar 2 00:47:50 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1831. Mar 2 00:47:50 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1832. Mar 2 00:47:50 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1833. Mar 2 00:47:50 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1834. Mar 2 00:47:50 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1835. Mar 2 00:47:58 openelec daemon.info connmand[1096]: eth1 {RX} 38 packets 12464 bytes
  1836. Mar 2 00:47:58 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1837. Mar 2 00:47:58 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1838. Mar 2 00:47:58 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1839. Mar 2 00:47:58 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1840. Mar 2 00:47:58 openelec user.info kernel: [ 4321.485712] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1841. Mar 2 00:47:59 openelec daemon.info connmand[1096]: eth1 {RX} 38 packets 12464 bytes
  1842. Mar 2 00:47:59 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1843. Mar 2 00:47:59 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1844. Mar 2 00:47:59 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1845. Mar 2 00:47:59 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1846. Mar 2 00:47:59 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1847. Mar 2 00:48:16 openelec daemon.info connmand[1096]: eth1 {RX} 38 packets 12464 bytes
  1848. Mar 2 00:48:16 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1849. Mar 2 00:48:16 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1850. Mar 2 00:48:16 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1851. Mar 2 00:48:16 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1852. Mar 2 00:48:16 openelec user.info kernel: [ 4339.276855] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1853. Mar 2 00:48:17 openelec daemon.info connmand[1096]: eth1 {RX} 38 packets 12464 bytes
  1854. Mar 2 00:48:17 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1855. Mar 2 00:48:17 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1856. Mar 2 00:48:17 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1857. Mar 2 00:48:17 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1858. Mar 2 00:48:17 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1859. Mar 2 00:48:30 openelec daemon.info connmand[1096]: eth1 {RX} 39 packets 12792 bytes
  1860. Mar 2 00:48:30 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1861. Mar 2 00:48:30 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1862. Mar 2 00:48:30 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1863. Mar 2 00:48:30 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1864. Mar 2 00:48:30 openelec user.info kernel: [ 4353.355524] asix 1-1.3:1.0 eth1: link down
  1865. Mar 2 00:48:31 openelec daemon.info connmand[1096]: eth1 {RX} 39 packets 12792 bytes
  1866. Mar 2 00:48:31 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1867. Mar 2 00:48:31 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1868. Mar 2 00:48:31 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1869. Mar 2 00:48:31 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1870. Mar 2 00:48:31 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1871. Mar 2 00:51:17 openelec daemon.info connmand[1096]: eth1 {RX} 39 packets 12792 bytes
  1872. Mar 2 00:51:17 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1873. Mar 2 00:51:17 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1874. Mar 2 00:51:17 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1875. Mar 2 00:51:17 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1876. Mar 2 00:51:17 openelec user.info kernel: [ 4520.390847] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1877. Mar 2 00:51:18 openelec daemon.info connmand[1096]: eth1 {RX} 39 packets 12792 bytes
  1878. Mar 2 00:51:18 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1879. Mar 2 00:51:18 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1880. Mar 2 00:51:18 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1881. Mar 2 00:51:18 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1882. Mar 2 00:51:18 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1883. Mar 2 00:52:07 openelec daemon.info connmand[1096]: eth1 {RX} 39 packets 12792 bytes
  1884. Mar 2 00:52:07 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1885. Mar 2 00:52:07 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1886. Mar 2 00:52:07 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1887. Mar 2 00:52:07 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1888. Mar 2 00:52:07 openelec user.info kernel: [ 4570.692508] asix 1-1.3:1.0 eth1: link down
  1889. Mar 2 00:52:08 openelec daemon.info connmand[1096]: eth1 {RX} 39 packets 12792 bytes
  1890. Mar 2 00:52:08 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1891. Mar 2 00:52:08 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1892. Mar 2 00:52:08 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1893. Mar 2 00:52:08 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1894. Mar 2 00:52:08 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1895. Mar 2 00:52:11 openelec daemon.info connmand[1096]: eth1 {RX} 39 packets 12792 bytes
  1896. Mar 2 00:52:11 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1897. Mar 2 00:52:11 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1898. Mar 2 00:52:11 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1899. Mar 2 00:52:11 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1900. Mar 2 00:52:11 openelec user.info kernel: [ 4574.149503] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1901. Mar 2 00:52:12 openelec daemon.info connmand[1096]: eth1 {RX} 39 packets 12792 bytes
  1902. Mar 2 00:52:12 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1903. Mar 2 00:52:12 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1904. Mar 2 00:52:12 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1905. Mar 2 00:52:12 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1906. Mar 2 00:52:12 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1907. Mar 2 01:01:26 openelec daemon.info connmand[1096]: ntp: time slew +0.003384 s
  1908. Mar 2 01:03:08 openelec daemon.info connmand[1096]: eth1 {RX} 43 packets 14104 bytes
  1909. Mar 2 01:03:08 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1910. Mar 2 01:03:08 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1911. Mar 2 01:03:08 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1912. Mar 2 01:03:08 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1913. Mar 2 01:03:08 openelec user.info kernel: [ 5231.151174] asix 1-1.3:1.0 eth1: link down
  1914. Mar 2 01:03:09 openelec daemon.info connmand[1096]: eth1 {RX} 43 packets 14104 bytes
  1915. Mar 2 01:03:09 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1916. Mar 2 01:03:09 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1917. Mar 2 01:03:09 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1918. Mar 2 01:03:09 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1919. Mar 2 01:03:09 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1920. Mar 2 01:03:45 openelec daemon.info connmand[1096]: eth1 {RX} 43 packets 14104 bytes
  1921. Mar 2 01:03:45 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1922. Mar 2 01:03:45 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1923. Mar 2 01:03:45 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1924. Mar 2 01:03:45 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1925. Mar 2 01:03:45 openelec user.info kernel: [ 5268.142688] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1926. Mar 2 01:03:46 openelec daemon.info connmand[1096]: eth1 {RX} 43 packets 14104 bytes
  1927. Mar 2 01:03:46 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1928. Mar 2 01:03:46 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1929. Mar 2 01:03:46 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1930. Mar 2 01:03:46 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1931. Mar 2 01:03:46 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1932. Mar 2 01:05:42 openelec daemon.info connmand[1096]: eth1 {RX} 44 packets 14432 bytes
  1933. Mar 2 01:05:42 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1934. Mar 2 01:05:42 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1935. Mar 2 01:05:42 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1936. Mar 2 01:05:42 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1937. Mar 2 01:05:42 openelec user.info kernel: [ 5385.514758] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1938. Mar 2 01:05:43 openelec daemon.info connmand[1096]: eth1 {RX} 44 packets 14432 bytes
  1939. Mar 2 01:05:43 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1940. Mar 2 01:05:43 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1941. Mar 2 01:05:43 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1942. Mar 2 01:05:43 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1943. Mar 2 01:05:43 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1944. Mar 2 01:06:30 openelec daemon.info connmand[1096]: eth1 {RX} 44 packets 14432 bytes
  1945. Mar 2 01:06:30 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1946. Mar 2 01:06:30 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1947. Mar 2 01:06:30 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1948. Mar 2 01:06:30 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1949. Mar 2 01:06:30 openelec user.info kernel: [ 5433.641314] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1950. Mar 2 01:06:31 openelec daemon.info connmand[1096]: eth1 {RX} 44 packets 14432 bytes
  1951. Mar 2 01:06:31 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1952. Mar 2 01:06:31 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1953. Mar 2 01:06:31 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1954. Mar 2 01:06:31 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1955. Mar 2 01:06:31 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1956. Mar 2 01:06:46 openelec daemon.info connmand[1096]: eth1 {RX} 44 packets 14432 bytes
  1957. Mar 2 01:06:46 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1958. Mar 2 01:06:46 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1959. Mar 2 01:06:46 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1960. Mar 2 01:06:46 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1961. Mar 2 01:06:46 openelec user.info kernel: [ 5449.256843] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1962. Mar 2 01:06:47 openelec daemon.info connmand[1096]: eth1 {RX} 44 packets 14432 bytes
  1963. Mar 2 01:06:47 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1964. Mar 2 01:06:47 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1965. Mar 2 01:06:47 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1966. Mar 2 01:06:47 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1967. Mar 2 01:06:47 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1968. Mar 2 01:07:00 openelec daemon.info connmand[1096]: eth1 {RX} 44 packets 14432 bytes
  1969. Mar 2 01:07:00 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1970. Mar 2 01:07:00 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1971. Mar 2 01:07:00 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1972. Mar 2 01:07:00 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1973. Mar 2 01:07:00 openelec user.info kernel: [ 5463.592341] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1974. Mar 2 01:07:01 openelec daemon.info connmand[1096]: eth1 {RX} 44 packets 14432 bytes
  1975. Mar 2 01:07:01 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1976. Mar 2 01:07:01 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1977. Mar 2 01:07:01 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1978. Mar 2 01:07:01 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1979. Mar 2 01:07:01 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1980. Mar 2 01:07:51 openelec daemon.info connmand[1096]: eth1 {RX} 44 packets 14432 bytes
  1981. Mar 2 01:07:51 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1982. Mar 2 01:07:51 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1983. Mar 2 01:07:51 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1984. Mar 2 01:07:51 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1985. Mar 2 01:07:51 openelec user.info kernel: [ 5514.150575] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1986. Mar 2 01:07:52 openelec daemon.info connmand[1096]: eth1 {RX} 44 packets 14432 bytes
  1987. Mar 2 01:07:52 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1988. Mar 2 01:07:52 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  1989. Mar 2 01:07:52 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  1990. Mar 2 01:07:52 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1991. Mar 2 01:07:52 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  1992. Mar 2 01:10:10 openelec daemon.info connmand[1096]: eth1 {RX} 44 packets 14432 bytes
  1993. Mar 2 01:10:10 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  1994. Mar 2 01:10:10 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  1995. Mar 2 01:10:10 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  1996. Mar 2 01:10:10 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  1997. Mar 2 01:10:10 openelec user.info kernel: [ 5653.794162] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  1998. Mar 2 01:10:11 openelec daemon.info connmand[1096]: eth1 {RX} 44 packets 14432 bytes
  1999. Mar 2 01:10:11 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  2000. Mar 2 01:10:11 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  2001. Mar 2 01:10:11 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  2002. Mar 2 01:10:11 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  2003. Mar 2 01:10:11 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  2004. Mar 2 01:10:58 openelec daemon.info connmand[1096]: eth1 {RX} 44 packets 14432 bytes
  2005. Mar 2 01:10:58 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  2006. Mar 2 01:10:58 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  2007. Mar 2 01:10:58 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  2008. Mar 2 01:10:58 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  2009. Mar 2 01:10:58 openelec user.info kernel: [ 5701.536610] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  2010. Mar 2 01:10:59 openelec daemon.info connmand[1096]: eth1 {RX} 44 packets 14432 bytes
  2011. Mar 2 01:10:59 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  2012. Mar 2 01:10:59 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  2013. Mar 2 01:10:59 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  2014. Mar 2 01:10:59 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  2015. Mar 2 01:10:59 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  2016. Mar 2 01:12:52 openelec daemon.info connmand[1096]: eth1 {RX} 45 packets 14760 bytes
  2017. Mar 2 01:12:52 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  2018. Mar 2 01:12:52 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  2019. Mar 2 01:12:52 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  2020. Mar 2 01:12:52 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  2021. Mar 2 01:12:52 openelec user.info kernel: [ 5815.324915] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  2022. Mar 2 01:12:53 openelec daemon.info connmand[1096]: eth1 {RX} 45 packets 14760 bytes
  2023. Mar 2 01:12:53 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  2024. Mar 2 01:12:53 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  2025. Mar 2 01:12:53 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  2026. Mar 2 01:12:53 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  2027. Mar 2 01:12:53 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  2028. Mar 2 01:14:29 openelec daemon.info connmand[1096]: eth1 {RX} 47 packets 15416 bytes
  2029. Mar 2 01:14:29 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  2030. Mar 2 01:14:29 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  2031. Mar 2 01:14:29 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  2032. Mar 2 01:14:29 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  2033. Mar 2 01:14:29 openelec user.info kernel: [ 5912.857377] asix 1-1.3:1.0 eth1: link down
  2034. Mar 2 01:14:30 openelec daemon.info connmand[1096]: eth1 {RX} 47 packets 15416 bytes
  2035. Mar 2 01:14:30 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  2036. Mar 2 01:14:30 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  2037. Mar 2 01:14:30 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  2038. Mar 2 01:14:30 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  2039. Mar 2 01:14:30 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  2040. Mar 2 01:15:14 openelec daemon.info connmand[1096]: eth1 {RX} 49 packets 16072 bytes
  2041. Mar 2 01:15:14 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  2042. Mar 2 01:15:14 openelec daemon.info connmand[1096]: eth1 {update} flags 102467 <UP,RUNNING,LOWER_UP>
  2043. Mar 2 01:15:14 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  2044. Mar 2 01:15:14 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 6 <UP>
  2045. Mar 2 01:15:14 openelec user.info kernel: [ 5957.272353] asix 1-1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x49E1
  2046. Mar 2 01:15:15 openelec daemon.info connmand[1096]: eth1 {RX} 49 packets 16072 bytes
  2047. Mar 2 01:15:15 openelec daemon.info connmand[1096]: eth1 {TX} 0 packets 404 bytes
  2048. Mar 2 01:15:15 openelec daemon.info connmand[1096]: eth1 {update} flags 36867 <UP>
  2049. Mar 2 01:15:15 openelec daemon.err connmand[1096]: connman_inet_clear_ipv6_address: Invalid argument
  2050. Mar 2 01:15:15 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 address 00:50:B6:0D:DD:A8 mtu 1500
  2051. Mar 2 01:15:15 openelec daemon.info connmand[1096]: eth1 {newlink} index 3 operstate 2 <DOWN>
  2052. Mar 2 01:16:07 openelec daemon.info connmand[1096]: eth1 {RX} 49 packets 16072 bytes
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!