API tools faq
paste
Advertisement
Guest User

dmesg xbian

a guest
Mar 30th, 2015
138
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 20.61 KB | None | 0 0
raw download clone embed print report
  1. xbian@xbian ~ $ dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0xf00
  3. [ 0.000000] Linux version 3.18.8+ (root@vps01) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #1 SMP PREEMPT Thu Mar 5 03:13:36 CET 2015
  4. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] Machine: BCM2709
  7. [ 0.000000] cma: Reserved 16 MiB at 0x2e000000
  8. [ 0.000000] Memory policy: Data cache writealloc
  9. [ 0.000000] On node 0 totalpages: 192512
  10. [ 0.000000] free_area_init_node: node 0, pgdat 806e0c40, node_mem_map ada0f000
  11. [ 0.000000] Normal zone: 1504 pages used for memmap
  12. [ 0.000000] Normal zone: 0 pages reserved
  13. [ 0.000000] Normal zone: 192512 pages, LIFO batch:31
  14. [ 0.000000] [bcm2709_smp_init_cpus] enter (8560->f3003010)
  15. [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
  16. [ 0.000000] PERCPU: Embedded 9 pages/cpu @ad9e6000 s5504 r8192 d23168 u36864
  17. [ 0.000000] pcpu-alloc: s5504 r8192 d23168 u36864 alloc=9*4096
  18. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  19. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 191008
  20. [ 0.000000] Kernel command line: selinux=0 usbcore.autosuspend=-1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2709.boardrev=0xa01041 bcm2709.serial=0x5345d6cd smsc95xx.macaddr=B8:27:EB:45:D6:CD bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 telnet zswap.enabled=1 zswap.compressor=lz4 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootflags=subvol=root/@,thread_pool=2,autodefrag,compress=lz4,commit=120 rootfstype=btrfs rootwait smsc95xx.turbo_mode=N logo.nologo quiet noswap loglevel=0 mod_scsi.scan=sync partswap startevent=mountall splash nohdparm --startup-event mountall
  21. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  22. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  23. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  24. [ 0.000000] Memory: 739344K/770048K available (5125K kernel code, 270K rwdata, 1424K rodata, 192K init, 263K bss, 30704K reserved)
  25. [ 0.000000] Virtual kernel memory layout:
  26. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  27. [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
  28. [ 0.000000] vmalloc : 0xaf800000 - 0xff000000 (1272 MB)
  29. [ 0.000000] lowmem : 0x80000000 - 0xaf000000 ( 752 MB)
  30. [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
  31. [ 0.000000] .text : 0x80008000 - 0x8066d764 (6550 kB)
  32. [ 0.000000] .init : 0x8066e000 - 0x8069e000 ( 192 kB)
  33. [ 0.000000] .data : 0x8069e000 - 0x806e1a20 ( 271 kB)
  34. [ 0.000000] .bss : 0x806e1a20 - 0x80723694 ( 264 kB)
  35. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  36. [ 0.000000] Preemptible hierarchical RCU implementation.
  37. [ 0.000000] NR_IRQS:480
  38. [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
  39. [ 0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
  40. [ 0.000023] Switching to timer-based delay loop, resolution 52ns
  41. [ 0.000190] Console: colour dummy device 80x30
  42. [ 0.000301] console [tty1] enabled
  43. [ 0.000319] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
  44. [ 0.000332] pid_max: default: 32768 minimum: 301
  45. [ 0.000459] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  46. [ 0.000472] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  47. [ 0.001181] Initializing cgroup subsys memory
  48. [ 0.001231] CPU: Testing write buffer coherency: ok
  49. [ 0.001520] missing device node for CPU 0
  50. [ 0.001528] missing device node for CPU 1
  51. [ 0.001534] missing device node for CPU 2
  52. [ 0.001539] missing device node for CPU 3
  53. [ 0.001551] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
  54. [ 0.001558] [bcm2709_smp_prepare_cpus] enter
  55. [ 0.001619] Setting up static identity map for 0x4de300 - 0x4de334
  56. [ 0.016921] [bcm2709_boot_secondary] cpu:1 started (0) 18
  57. [ 0.017144] CPU1: Booted secondary processor
  58. [ 0.017148] [bcm2709_secondary_init] enter cpu:1
  59. [ 0.017176] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
  60. [ 0.017531] [bcm2709_boot_secondary] cpu:2 started (0) 17
  61. [ 0.017710] CPU2: Booted secondary processor
  62. [ 0.017714] [bcm2709_secondary_init] enter cpu:2
  63. [ 0.017732] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
  64. [ 0.017998] [bcm2709_boot_secondary] cpu:3 started (0) 18
  65. [ 0.018165] CPU3: Booted secondary processor
  66. [ 0.018169] [bcm2709_secondary_init] enter cpu:3
  67. [ 0.018186] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
  68. [ 0.018222] Brought up 4 CPUs
  69. [ 0.018238] SMP: Total of 4 processors activated (153.00 BogoMIPS).
  70. [ 0.018244] CPU: All CPU(s) started in SVC mode.
  71. [ 0.018297] LOCALITY CPU 0 to 1: 2
  72. [ 0.018303] LOCALITY CPU 0 to 2: 2
  73. [ 0.018309] LOCALITY CPU 0 to 3: 2
  74. [ 0.018315] LOCALITY CPU 1 to 2: 2
  75. [ 0.018320] LOCALITY CPU 1 to 3: 2
  76. [ 0.018326] LOCALITY CPU 2 to 3: 2
  77. [ 0.018665] devtmpfs: initialized
  78. [ 0.031181] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  79. [ 0.031916] xor: measuring software checksum speed
  80. [ 0.063486] arm4regs : 1387.200 MB/sec
  81. [ 0.096855] 8regs : 879.600 MB/sec
  82. [ 0.130224] 32regs : 810.000 MB/sec
  83. [ 0.163596] neon : 1291.200 MB/sec
  84. [ 0.163603] xor: using function: arm4regs (1387.200 MB/sec)
  85. [ 0.163627] pinctrl core: initialized pinctrl subsystem
  86. [ 0.164081] NET: Registered protocol family 16
  87. [ 0.167782] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  88. [ 0.168645] bcm2709.uart_clock = 3000000
  89. [ 0.169862] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  90. [ 0.169870] hw-breakpoint: maximum watchpoint size is 8 bytes.
  91. [ 0.169891] mailbox: Broadcom VideoCore Mailbox driver
  92. [ 0.169961] bcm2708_vcio: mailbox at f300b880
  93. [ 0.170169] bcm_power: Broadcom power driver
  94. [ 0.170179] bcm_power_open() -> 0
  95. [ 0.170185] bcm_power_request(0, 8)
  96. [ 0.670743] bcm_mailbox_read -> 00000080, 0
  97. [ 0.670749] bcm_power_request -> 0
  98. [ 0.670822] Serial: AMBA PL011 UART driver
  99. [ 0.670915] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
  100. [ 0.757880] raid6: int32x1 150 MB/s
  101. [ 0.814613] raid6: int32x2 192 MB/s
  102. [ 0.871330] raid6: int32x4 202 MB/s
  103. [ 0.928120] raid6: int32x8 199 MB/s
  104. [ 0.984758] raid6: neonx1 476 MB/s
  105. [ 1.041455] raid6: neonx2 644 MB/s
  106. [ 1.098165] raid6: neonx4 781 MB/s
  107. [ 1.154950] raid6: neonx8 717 MB/s
  108. [ 1.154957] raid6: using algorithm neonx4 (781 MB/s)
  109. [ 1.154963] raid6: using intx1 recovery algorithm
  110. [ 1.155383] SCSI subsystem initialized
  111. [ 1.155500] usbcore: registered new interface driver usbfs
  112. [ 1.155552] usbcore: registered new interface driver hub
  113. [ 1.155658] usbcore: registered new device driver usb
  114. [ 1.157068] Switched to clocksource arch_sys_counter
  115. [ 1.162978] NET: Registered protocol family 2
  116. [ 1.163652] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  117. [ 1.163751] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  118. [ 1.163866] TCP: Hash tables configured (established 8192 bind 8192)
  119. [ 1.163935] TCP: reno registered
  120. [ 1.163946] UDP hash table entries: 512 (order: 2, 16384 bytes)
  121. [ 1.163988] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  122. [ 1.164195] NET: Registered protocol family 1
  123. [ 1.164437] RPC: Registered named UNIX socket transport module.
  124. [ 1.164446] RPC: Registered udp transport module.
  125. [ 1.164452] RPC: Registered tcp transport module.
  126. [ 1.164458] RPC: Registered tcp NFSv4.1 backchannel transport module.
  127. [ 1.165936] bcm2708_dma: DMA manager at f3007000
  128. [ 1.166023] bcm2708_gpio: bcm2708_gpio_probe 806bf4e8
  129. [ 1.166373] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
  130. [ 1.167140] futex hash table entries: 1024 (order: 4, 65536 bytes)
  131. [ 1.172568] zpool: loaded
  132. [ 1.172584] zbud: loaded
  133. [ 1.173105] VFS: Disk quotas dquot_6.5.2
  134. [ 1.173266] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  135. [ 1.175071] NFS: Registering the id_resolver key type
  136. [ 1.175118] Key type id_resolver registered
  137. [ 1.175124] Key type id_legacy registered
  138. [ 1.175147] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  139. [ 1.175701] msgmni has been set to 1476
  140. [ 1.176705] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  141. [ 1.176721] io scheduler noop registered
  142. [ 1.176731] io scheduler deadline registered
  143. [ 1.176874] io scheduler cfq registered
  144. [ 1.177012] io scheduler bfq registered (default)
  145. [ 1.177019] BFQ I/O-scheduler version: v7r7
  146. [ 1.178064] BCM2708FB: allocated DMA memory ee400000
  147. [ 1.178102] BCM2708FB: allocated DMA channel 0 @ f3007000
  148. [ 1.199910] Console: switching to colour frame buffer device 240x67
  149. [ 1.212945] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
  150. [ 1.213114] uart-pl011 dev:f1: no DMA platform data
  151. [ 1.214138] usbcore: registered new interface driver smsc95xx
  152. [ 1.214168] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  153. [ 1.414333] Core Release: 2.80a
  154. [ 1.414344] Setting default values for core params
  155. [ 1.414376] Finished setting default values for core params
  156. [ 1.614593] Using Buffer DMA mode
  157. [ 1.614602] Periodic Transfer Interrupt Enhancement - disabled
  158. [ 1.614607] Multiprocessor Interrupt Enhancement - disabled
  159. [ 1.614614] OTG VER PARAM: 0, OTG VER FLAG: 0
  160. [ 1.614624] Dedicated Tx FIFOs mode
  161. [ 1.614837] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xae414000 dma = 0xee414000 len=9024
  162. [ 1.614859] FIQ FSM acceleration enabled for :
  163. [ 1.614859] Non-periodic Split Transactions
  164. [ 1.614859] Periodic Split Transactions
  165. [ 1.614859] High-Speed Isochronous Endpoints
  166. [ 1.614874] dwc_otg: Microframe scheduler enabled
  167. [ 1.614904] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x803ad53c
  168. [ 1.614914] WARN::hcd_init_fiq:413: FIQ ASM at 0x803ad86c length 36
  169. [ 1.614925] WARN::hcd_init_fiq:438: MPHI regs_base at 0xaf812000
  170. [ 1.614939] dwc_otg bcm2708_usb: DWC OTG Controller
  171. [ 1.614970] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  172. [ 1.615002] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  173. [ 1.615044] Init: Port Power? op_state=1
  174. [ 1.615050] Init: Power Port (0)
  175. [ 1.615215] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  176. [ 1.615226] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  177. [ 1.615235] usb usb1: Product: DWC OTG Controller
  178. [ 1.615244] usb usb1: Manufacturer: Linux 3.18.8+ dwc_otg_hcd
  179. [ 1.615252] usb usb1: SerialNumber: bcm2708_usb
  180. [ 1.615733] hub 1-0:1.0: USB hub found
  181. [ 1.615779] hub 1-0:1.0: 1 port detected
  182. [ 1.616037] dwc_otg: FIQ enabled
  183. [ 1.616043] dwc_otg: NAK holdoff enabled
  184. [ 1.616049] dwc_otg: FIQ split-transaction FSM enabled
  185. [ 1.616070] Module dwc_common_port init
  186. [ 1.616245] usbcore: registered new interface driver usb-storage
  187. [ 1.616390] mousedev: PS/2 mouse device common for all mice
  188. [ 1.616930] bcm2835-cpufreq: min=600000 max=1000000
  189. [ 1.617139] sdhci: Secure Digital Host Controller Interface driver
  190. [ 1.617147] sdhci: Copyright(c) Pierre Ossman
  191. [ 1.617255] DMA channels allocated for the MMC driver
  192. [ 1.643747] Load BCM2835 MMC driver
  193. [ 1.643845] ledtrig-cpu: registered to indicate activity on CPUs
  194. [ 1.643942] hidraw: raw HID events driver (C) Jiri Kosina
  195. [ 1.644106] usbcore: registered new interface driver usbhid
  196. [ 1.644112] usbhid: USB HID core driver
  197. [ 1.646355] NET: Registered protocol family 17
  198. [ 1.646464] Key type dns_resolver registered
  199. [ 1.649113] Registering SWP/SWPB emulation handler
  200. [ 1.649504] zswap: loading zswap
  201. [ 1.649512] zpool: creating pool type zbud
  202. [ 1.649523] zpool: created zbud pool
  203. [ 1.649529] zswap: using zbud pool
  204. [ 1.649564] zswap: using lz4 compressor
  205. [ 1.651109] Btrfs loaded
  206. [ 1.651601] Waiting for root device /dev/mmcblk0p2...
  207. [ 1.684037] mmc0: host does not support reading read-only switch, assuming write-enable
  208. [ 1.686572] mmc0: new high speed SDHC card at address aaaa
  209. [ 1.686839] mmcblk0: mmc0:aaaa SE16G 14.8 GiB
  210. [ 1.688187] mmcblk0: p1 p2 p3
  211. [ 1.754778] BTRFS: device label xbian devid 1 transid 445 /dev/root
  212. [ 1.756208] BTRFS info (device mmcblk0p2): enabling auto defrag
  213. [ 1.756231] BTRFS info (device mmcblk0p2): disk space caching is enabled
  214. [ 1.756239] BTRFS: has skinny extents
  215. [ 1.783317] BTRFS: detected SSD devices, enabling SSD mode
  216. [ 1.807123] VFS: Mounted root (btrfs filesystem) on device 0:12.
  217. [ 1.808775] devtmpfs: mounted
  218. [ 1.808989] Freeing unused kernel memory: 192K (8066e000 - 8069e000)
  219. [ 1.808996] BFS CPU scheduler v0.460 by Con Kolivas.
  220. [ 1.813819] Indeed it is in host mode hprt0 = 00021501
  221. [ 1.980472] usb 1-1: new high-speed USB device number 2 using dwc_otg
  222. [ 1.980589] Indeed it is in host mode hprt0 = 00001101
  223. [ 2.124694] random: init urandom read with 31 bits of entropy available
  224. [ 2.160763] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  225. [ 2.160788] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  226. [ 2.161358] hub 1-1:1.0: USB hub found
  227. [ 2.161427] hub 1-1:1.0: 5 ports detected
  228. [ 2.440550] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  229. [ 2.533956] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  230. [ 2.533975] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  231. [ 2.536525] smsc95xx v1.0.4
  232. [ 2.575895] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:45:d6:cd
  233. [ 2.653807] usb 1-1.5: new full-speed USB device number 4 using dwc_otg
  234. [ 2.752339] usb 1-1.5: New USB device found, idVendor=046d, idProduct=c52b
  235. [ 2.752358] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  236. [ 2.752368] usb 1-1.5: Product: USB Receiver
  237. [ 2.752377] usb 1-1.5: Manufacturer: Logitech
  238. [ 3.172724] BTRFS info (device mmcblk0p2): disk space caching is enabled
  239. [ 4.092859] init: xbian-failaccess main process (230) killed by TERM signal
  240. [ 4.354011] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
  241. [ 4.495574] usb 1-1.3: New USB device found, idVendor=1058, idProduct=1230
  242. [ 4.495604] usb 1-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  243. [ 4.495619] usb 1-1.3: Product: My Book 1230
  244. [ 4.495633] usb 1-1.3: Manufacturer: Western Digital
  245. [ 4.495647] usb 1-1.3: SerialNumber: 574343344D31594B374C3250
  246. [ 4.496550] usb-storage 1-1.3:1.0: USB Mass Storage device detected
  247. [ 4.497277] scsi host0: usb-storage 1-1.3:1.0
  248. [ 4.532797] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  249. [ 4.948207] init: module-init-tools pre-start process (541) terminated with status 1
  250. [ 5.098871] udevd[693]: starting version 175
  251. [ 5.316332] init: frandom pre-start process (706) terminated with status 1
  252. [ 5.502004] scsi 0:0:0:0: Direct-Access WD My Book 1230 1065 PQ: 0 ANSI: 6
  253. [ 5.504281] sd 0:0:0:0: [sda] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB)
  254. [ 5.505170] sd 0:0:0:0: [sda] Write Protect is off
  255. [ 5.505202] sd 0:0:0:0: [sda] Mode Sense: 53 00 10 08
  256. [ 5.517384] sd 0:0:0:0: [sda] No Caching mode page found
  257. [ 5.517420] sd 0:0:0:0: [sda] Assuming drive cache: write through
  258. [ 5.520573] scsi 0:0:0:1: Enclosure WD SES Device 1065 PQ: 0 ANSI: 6
  259. [ 5.795017] init: failsafe main process (96) killed by TERM signal
  260. [ 6.146621] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
  261. [ 6.474235] random: nonblocking pool is initialized
  262. [ 10.151683] sda: sda1
  263. [ 10.155771] sd 0:0:0:0: [sda] Attached SCSI disk
  264. [ 17.310079] EXT4-fs (sda1): recovery complete
  265. [ 17.310779] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  266. [ 60.867986] ------------[ cut here ]------------
  267. [ 60.868040] WARNING: CPU: 0 PID: 2165 at net/core/skbuff.c:3995 skb_try_coalesce+0x304/0x384()
  268. [ 60.868051] Modules linked in:
  269. [ 60.868073] CPU: 0 PID: 2165 Comm: nzbget Not tainted 3.18.8+ #1
  270. [ 60.868112] [<80014334>] (unwind_backtrace) from [<800112fc>] (show_stack+0x10/0x14)
  271. [ 60.868196] [<800112fc>] (show_stack) from [<804d9568>] (dump_stack+0x80/0xcc)
  272. [ 60.868227] [<804d9568>] (dump_stack) from [<80028180>] (warn_slowpath_common+0x64/0x88)
  273. [ 60.868253] [<80028180>] (warn_slowpath_common) from [<800281c0>] (warn_slowpath_null+0x1c/0x24)
  274. [ 60.868277] [<800281c0>] (warn_slowpath_null) from [<8040a8bc>] (skb_try_coalesce+0x304/0x384)
  275. [ 60.868302] [<8040a8bc>] (skb_try_coalesce) from [<8045ea50>] (tcp_try_coalesce.part.19+0x28/0xb0)
  276. [ 60.868372] [<8045ea50>] (tcp_try_coalesce.part.19) from [<8045f650>] (tcp_data_queue+0x744/0xc80)
  277. [ 60.868394] [<8045f650>] (tcp_data_queue) from [<80461a84>] (tcp_rcv_established+0x138/0x5e8)
  278. [ 60.868417] [<80461a84>] (tcp_rcv_established) from [<8046ac48>] (tcp_v4_do_rcv+0x13c/0x354)
  279. [ 60.868439] [<8046ac48>] (tcp_v4_do_rcv) from [<8046cd4c>] (tcp_v4_rcv+0x914/0xa00)
  280. [ 60.868462] [<8046cd4c>] (tcp_v4_rcv) from [<804491a4>] (ip_local_deliver_finish+0xdc/0x2c8)
  281. [ 60.868484] [<804491a4>] (ip_local_deliver_finish) from [<80448e24>] (ip_rcv_finish+0x14c/0x3f0)
  282. [ 60.868506] [<80448e24>] (ip_rcv_finish) from [<8041499c>] (__netif_receive_skb_core+0x604/0x7a4)
  283. [ 60.868530] [<8041499c>] (__netif_receive_skb_core) from [<8041769c>] (process_backlog+0x7c/0x138)
  284. [ 60.868553] [<8041769c>] (process_backlog) from [<8041876c>] (net_rx_action+0x120/0x1f0)
  285. [ 60.868576] [<8041876c>] (net_rx_action) from [<8002adb4>] (__do_softirq+0xf0/0x20c)
  286. [ 60.868595] [<8002adb4>] (__do_softirq) from [<8002b16c>] (irq_exit+0xa8/0xf4)
  287. [ 60.868618] [<8002b16c>] (irq_exit) from [<8004ec00>] (__handle_domain_irq+0x7c/0xcc)
  288. [ 60.868641] [<8004ec00>] (__handle_domain_irq) from [<80011db0>] (__irq_svc+0x30/0x144)
  289. [ 60.868664] [<80011db0>] (__irq_svc) from [<804ddb4c>] (_raw_spin_unlock+0x14/0x48)
  290. [ 60.868690] [<804ddb4c>] (_raw_spin_unlock) from [<8011d228>] (dquot_claim_space_nodirty+0x10c/0x15c)
  291. [ 60.868717] [<8011d228>] (dquot_claim_space_nodirty) from [<8013a3b8>] (ext4_da_update_reserve_space+0xa4/0x17c)
  292. [ 60.868744] [<8013a3b8>] (ext4_da_update_reserve_space) from [<80159f64>] (ext4_ext_map_blocks+0xd20/0x12ac)
  293. [ 60.868767] [<80159f64>] (ext4_ext_map_blocks) from [<8013a5d0>] (ext4_map_blocks+0x140/0x460)
  294. [ 60.868791] [<8013a5d0>] (ext4_map_blocks) from [<8013eca0>] (mpage_map_and_submit_extent+0xa4/0x778)
  295. [ 60.868815] [<8013eca0>] (mpage_map_and_submit_extent) from [<8013f72c>] (ext4_writepages+0x3b8/0x528)
  296. [ 60.868838] [<8013f72c>] (ext4_writepages) from [<80096de8>] (do_writepages+0x24/0x38)
  297. [ 60.868864] [<80096de8>] (do_writepages) from [<8008e124>] (__filemap_fdatawrite_range+0x4c/0x54)
  298. [ 60.868888] [<8008e124>] (__filemap_fdatawrite_range) from [<8008e204>] (filemap_write_and_wait_range+0x34/0x74)
  299. [ 60.868912] [<8008e204>] (filemap_write_and_wait_range) from [<80135800>] (ext4_sync_file+0x60/0x250)
  300. [ 60.868934] [<80135800>] (ext4_sync_file) from [<800f8830>] (vfs_fsync_range+0x2c/0x3c)
  301. [ 60.868956] [<800f8830>] (vfs_fsync_range) from [<80134cd0>] (ext4_file_write_iter+0x1dc/0x4b4)
  302. [ 60.868980] [<80134cd0>] (ext4_file_write_iter) from [<800d1c0c>] (new_sync_write+0x94/0xbc)
  303. [ 60.869002] [<800d1c0c>] (new_sync_write) from [<800d2884>] (vfs_write+0xa0/0x1a8)
  304. [ 60.869023] [<800d2884>] (vfs_write) from [<800d2b9c>] (SyS_write+0x40/0x8c)
  305. [ 60.869046] [<800d2b9c>] (SyS_write) from [<8000e560>] (ret_fast_syscall+0x0/0x30)
  306. [ 60.869058] ---[ end trace 7f1db19d5134e625 ]---
  307. [ 105.205711] init: wait-for-state (zram-swapxbmc-done) main process (983) killed by TERM signal
  308. [ 105.463373] init: module-init-tools pre-start process (2540) terminated with status 1
  309. [ 105.933016] Adding 251388k swap on /dev/mmcblk0p3. Priority:0 extents:1 across:251388k SSFS
  310. [ 157.877379] init: wait-for-state (xbmcxbmc-loaded) main process (1098) terminated with status 100
  311. [ 157.931290] init: xbmc post-start process (1093) terminated with status 1
  312. [ 188.520772] init: wait-for-state (kill-splashxbmc-exits) main process (3645) terminated with status 100
  313. [ 188.538699] init: xbmc-kill-splash pre-start process (3644) terminated with status 1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!