API tools faq
paste
Advertisement
Guest User

BeagleBone boot on Mainline

a guest
Jun 10th, 2013
105
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 12.47 KB | None | 0 0
raw download clone embed print report diff
  1. U-Boot SPL 2013.04-00534-g842033e (Jun 11 2013 - 09:14:37)
  2. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
  3. musb-hdrc: MHDRC RTL version 2.0
  4. musb-hdrc: setup fifo_mode 4
  5. musb-hdrc: 28/31 max ep, 16384/16384 memory
  6. USB Peripheral mode controller at 47401000 using PIO, IRQ 0
  7. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
  8. musb-hdrc: MHDRC RTL version 2.0
  9. musb-hdrc: setup fifo_mode 4
  10. musb-hdrc: 28/31 max ep, 16384/16384 memory
  11. USB Host mode controller at 47401800 using PIO, IRQ 0
  12. OMAP SD/MMC: 0
  13. reading args
  14. spl: error reading image args, err - -1
  15. reading u-boot.img
  16. reading u-boot.img
  17.  
  18.  
  19. U-Boot 2013.04-00534-g842033e (Jun 11 2013 - 09:14:37)
  20.  
  21. I2C: ready
  22. DRAM: 256 MiB
  23. WARNING: Caches not enabled
  24. NAND: 0 MiB
  25. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
  26. *** Warning - readenv() failed, using default environment
  27.  
  28. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
  29. musb-hdrc: MHDRC RTL version 2.0
  30. musb-hdrc: setup fifo_mode 4
  31. musb-hdrc: 28/31 max ep, 16384/16384 memory
  32. USB Peripheral mode controller at 47401000 using PIO, IRQ 0
  33. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
  34. musb-hdrc: MHDRC RTL version 2.0
  35. musb-hdrc: setup fifo_mode 4
  36. musb-hdrc: 28/31 max ep, 16384/16384 memory
  37. USB Host mode controller at 47401800 using PIO, IRQ 0
  38. Net: <ethaddr> not set. Validating first E-fuse MAC
  39. cpsw, usb_ether
  40. Hit any key to stop autoboot: 0
  41. U-Boot#
  42. U-Boot#
  43. U-Boot# setenv bootargs console=ttyO0,115200n8 root=/dev/ram rw initrd=0x82000000,32MB
  44. U-Boot# mmc rescan
  45. U-Boot# fatload mmc 0 0x81000000 uImage.am335x-bone
  46. reading uImage.am335x-bone
  47. 4386333 bytes read in 795 ms (5.3 MiB/s)
  48. U-Boot# fatload mmc 0 82000000 bb.raw
  49. reading bb.raw
  50. 10240000 bytes read in 1825 ms (5.4 MiB/s)
  51. U-Boot# bootm 0x81000000
  52. ## Booting kernel from Legacy Image at 81000000 ...
  53. Image Name: Linux-3.10.0-rc5-00001-gf47cae4
  54. Image Type: ARM Linux Kernel Image (uncompressed)
  55. Data Size: 4386269 Bytes = 4.2 MiB
  56. Load Address: 80008000
  57. Entry Point: 80008000
  58. Verifying Checksum ... OK
  59. Loading Kernel Image ... OK
  60. OK
  61.  
  62. Starting kernel ...
  63.  
  64. [ 0.000000] Booting Linux on physical CPU 0x0
  65. [ 0.000000] Linux version 3.10.0-rc5-00001-gf47cae4 (lokesh@a0131933lt) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) 3
  66. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
  67. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  68. [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
  69. [ 0.000000] cma: CMA: reserved 16 MiB at 8e800000
  70. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  71. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  72. [ 0.000000] AM335X ES1.0 (neon )
  73. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0fc7000 s13632 r8192 d15040 u36864
  74. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
  75. [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram rw initrd=0x82000000,32MB
  76. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  77. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  78. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  79. [ 0.000000] Memory: 255MB = 255MB total
  80. [ 0.000000] Memory: 195540k/195540k available, 66604k reserved, 0K highmem
  81. [ 0.000000] Virtual kernel memory layout:
  82. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  83. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  84. [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
  85. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  86. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  87. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  88. [ 0.000000] .text : 0xc0008000 - 0xc075b1f8 (7501 kB)
  89. [ 0.000000] .init : 0xc075c000 - 0xc07be540 ( 394 kB)
  90. [ 0.000000] .data : 0xc07c0000 - 0xc08563c8 ( 601 kB)
  91. [ 0.000000] .bss : 0xc08563c8 - 0xc0dba8a0 (5522 kB)
  92. [ 0.000000] Hierarchical RCU implementation.
  93. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
  94. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  95. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  96. [ 0.000000] Total of 128 interrupts on 1 active controller
  97. [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
  98. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  99. [ 0.000000] OMAP clocksource: timer1 at 24000000 Hz
  100. [ 0.000000] Console: colour dummy device 80x30
  101. [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  102. [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  103. [ 0.000000] ... MAX_LOCK_DEPTH: 48
  104. [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  105. [ 0.000000] ... CLASSHASH_SIZE: 4096
  106. [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  107. [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  108. [ 0.000000] ... CHAINHASH_SIZE: 16384
  109. [ 0.000000] memory used by lock dependency info: 3695 kB
  110. [ 0.000000] per task-struct memory footprint: 1152 bytes
  111. [ 0.001320] Calibrating delay loop... 363.72 BogoMIPS (lpj=1818624)
  112. [ 0.119604] pid_max: default: 32768 minimum: 301
  113. [ 0.120267] Security Framework initialized
  114. [ 0.120462] Mount-cache hash table entries: 512
  115. [ 0.133420] CPU: Testing write buffer coherency: ok
  116. [ 0.135328] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  117. [ 0.135424] Setting up static identity map for 0xc0554108 - 0xc0554178
  118. [ 0.139344] Brought up 1 CPUs
  119. [ 0.139374] SMP: Total of 1 processors activated (363.72 BogoMIPS).
  120. [ 0.139389] CPU: All CPU(s) started in SVC mode.
  121. [ 0.143616] devtmpfs: initialized
  122. [ 0.224773] pinctrl core: initialized pinctrl subsystem
  123. [ 0.230966] regulator-dummy: no parameters
  124. [ 0.235742] NET: Registered protocol family 16
  125. [ 0.246612] DMA: preallocated 256 KiB pool for atomic coherent allocations
  126. [ 0.276617] OMAP GPIO hardware version 0.1
  127. [ 0.306155] No ATAGs?
  128. [ 0.306188] hw-breakpoint: debug architecture 0x4 unsupported.
  129. [ 0.391932] bio: create slab <bio-0> at 0
  130. [ 0.405614] SCSI subsystem initialized
  131. [ 0.408585] usbcore: registered new interface driver usbfs
  132. [ 0.409203] usbcore: registered new interface driver hub
  133. [ 0.410577] usbcore: registered new device driver usb
  134. [ 0.413161] omap_i2c 44e0b000.i2c: did not get pins for i2c error: -19
  135. [ 0.415891] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  136. [ 0.424004] DCDC1: at 1800 mV
  137. [ 0.427030] vdd_mpu: 925 <--> 1325 mV at 1100 mV 2010q1-202) ) #3 SMP Tue Ju3
  138. #
  139.  
  140. [ 0.429601] vdd_core: 925 <--> 1150 mV at 1100 mV
  141. [ 0.433044] LDO1: at 1800 mV
  142. [ 0.435572] LDO2: at 3300 mV
  143. [ 0.438126] LDO3: at 3300 mV
  144. [ 0.441230] LDO4: at 3300 mV
  145. [ 0.443436] tps65217 0-0024: TPS65217 ID 0xf version 1.1
  146. [ 0.454318] Switching to clocksource timer1
  147. [ 0.637428] NET: Registered protocol family 2
  148. [ 0.640128] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  149. [ 0.640415] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
  150. [ 0.641663] TCP: Hash tables configured (established 2048 bind 2048)
  151. [ 0.641972] TCP: reno registered
  152. [ 0.642019] UDP hash table entries: 256 (order: 2, 20480 bytes)
  153. [ 0.642364] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
  154. [ 0.644129] NET: Registered protocol family 1
  155. [ 0.646499] RPC: Registered named UNIX socket transport module.
  156. [ 0.646534] RPC: Registered udp transport module.
  157. [ 0.646550] RPC: Registered tcp transport module.
  158. [ 0.646567] RPC: Registered tcp NFSv4.1 backchannel transport module.
  159. [ 0.647737] Trying to unpack rootfs image as initramfs...
  160. [ 0.649334] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
  161. [ 0.915294] Freeing initrd memory: 32768K (c2000000 - c4000000)
  162. [ 0.915459] NetWinder Floating Point Emulator V0.97 (double precision)
  163. [ 1.166834] VFS: Disk quotas dquot_6.5.2
  164. [ 1.167155] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  165. [ 1.170691] NFS: Registering the id_resolver key type
  166. [ 1.171325] Key type id_resolver registered
  167. [ 1.171355] Key type id_legacy registered
  168. [ 1.171546] jffs2: version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc.
  169. [ 1.172281] msgmni has been set to 477
  170. [ 1.176938] io scheduler noop registered
  171. [ 1.176973] io scheduler deadline registered
  172. [ 1.177105] io scheduler cfq registered (default)
  173. [ 1.179003] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
  174. [ 1.184791] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  175. [ 1.194254] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
  176. [ 1.195620] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
  177. [ 1.824890] console [ttyO0] enabled
  178. [ 1.872186] brd: module loaded
  179. [ 1.900746] loop: module loaded
  180. [ 1.911627] mtdoops: mtd device (mtddev=name/number) must be supplied
  181. [ 1.930710] usbcore: registered new interface driver asix
  182. [ 1.937542] usbcore: registered new interface driver ax88179_178a
  183. [ 1.944540] usbcore: registered new interface driver cdc_ether
  184. [ 1.951823] usbcore: registered new interface driver smsc95xx
  185. [ 1.958783] usbcore: registered new interface driver net1080
  186. [ 1.965483] usbcore: registered new interface driver cdc_subset
  187. [ 1.972269] usbcore: registered new interface driver zaurus
  188. [ 1.979011] usbcore: registered new interface driver cdc_ncm
  189. [ 1.988076] usbcore: registered new interface driver cdc_wdm
  190. [ 1.994715] usbcore: registered new interface driver usb-storage
  191. [ 2.002126] usbcore: registered new interface driver usbtest
  192. [ 2.011406] mousedev: PS/2 mouse device common for all mice
  193. [ 2.024786] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
  194. [ 2.032548] 44e3e000.rtc: already running
  195. [ 2.038425] i2c /dev entries driver
  196. [ 2.045682] Driver for 1-wire Dallas network protocol.
  197. [ 2.057731] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  198. [ 2.069840] leds-gpio leds.3: pins are not configured from the driver
  199. [ 2.084225] ledtrig-cpu: registered to indicate activity on CPUs
  200. [ 2.093236] usbcore: registered new interface driver usbhid
  201. [ 2.099300] usbhid: USB HID core driver
  202. [ 2.105671] oprofile: no performance counters
  203. [ 2.113409] oprofile: using timer interrupt.
  204. [ 2.119140] TCP: cubic registered
  205. [ 2.122653] Initializing XFRM netlink socket
  206. [ 2.127404] NET: Registered protocol family 17
  207. [ 2.132208] NET: Registered protocol family 15
  208. [ 2.137516] Key type dns_resolver registered
  209. [ 2.142144] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  210. [ 2.150644] ThumbEE CPU extension supported.
  211. [ 2.224998] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
  212. [ 2.231446] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
  213. [ 2.241645] libphy: 4a101000.mdio: probed
  214. [ 2.246081] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
  215. [ 2.256257] Random MACID = 06:2e:a5:b3:b8:2d
  216. [ 2.267047] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 20:02:01 UTC (946756921)
  217. [ 2.281465] RAMDISK: ext2 filesystem found at block 0
  218. [ 2.287093] RAMDISK: Loading 10000KiB [1 disk] into ram disk... done.
  219. [ 2.931115] EXT2-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended
  220. [ 2.940563] VFS: Mounted root (ext2 filesystem) on device 1:0.
  221. [ 2.948140] devtmpfs: mounted
  222. [ 2.952074] Freeing unused kernel memory: 392K (c075c000 - c07be000)
  223. Mounting proc : OK
  224. Mounting sysfs : OK
  225. Mounting /dev : OK
  226. Creating local mdev devices
  227.  
  228. ******************************************
  229. Starting System Init for 6430EVM-6430
  230. Release: OpnSrc
  231. ******************************************
  232. Saving kernel ring buffer : OK
  233. Mounting devpts : OK
  234. Setting up networking
  235. Configuring lo : OK
  236. Configuring eth0 : ifup: can't open '/etc/network/interfaces': No such file or directory
  237. Failed
  238. Starting syslogd : OK
  239. Starting klogd : OK
  240. Mounting filesystems : mount: according to /proc/mounts, none is already mounted on /dev/pts
  241. mount: according to /proc/mounts, /proc is already mounted on /proc
  242. OK
  243.  
  244. Please press Enter to activate this console.
  245. #
  246. #
  247. # cat /proc/version
  248. Linux version 3.10.0-rc5-00001-gf47cae4 (lokesh@a0131933lt) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #3 SMP Tue Ju3
  249. #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!