# jan/04/2002 06:12:54 by RouterOS 6.12
# software id = JSDQ-E0Z6
#
/interface ethernet
set [ find default-name=ether1 ] mac-address=D4:CA:6D:61:27:CF name=\
    "ether01 - Servers1" speed=1Gbps
set [ find default-name=ether2 ] mac-address=D4:CA:6D:61:27:D0 name=\
    "ether02 - Servers2" speed=1Gbps
set [ find default-name=ether3 ] mac-address=D4:CA:6D:61:27:D1 name=\
    "ether03 - Raspi1" speed=1Gbps
set [ find default-name=ether4 ] mac-address=D4:CA:6D:61:27:D2 name=\
    "ether04 - Raspi2" speed=1Gbps
set [ find default-name=ether5 ] mac-address=D4:CA:6D:61:27:D3 name=ether05 \
    speed=1Gbps
set [ find default-name=ether6 ] mac-address=D4:CA:6D:61:27:D4 name=ether06 \
    speed=1Gbps
set [ find default-name=ether7 ] mac-address=D4:CA:6D:61:27:D5 name=ether07 \
    speed=1Gbps
set [ find default-name=ether8 ] mac-address=D4:CA:6D:61:27:D6 name=\
    "ether08 - Ripe Probe" speed=1Gbps
set [ find default-name=ether9 ] mac-address=D4:CA:6D:61:27:D7 name=\
    "ether09 - Modem" speed=1Gbps
set [ find default-name=ether10 ] mac-address=D4:CA:6D:61:27:D8 name=\
    "ether10 - EDPnet" speed=1Gbps
set [ find default-name=sfp1 ] name="sfp01 - Cross"
/interface bonding
add arp-ip-targets=85.234.197.61 link-monitoring=arp name=\
    "bonding EDPnet Server" slaves="ether01 - Servers1,ether02 - Servers2"
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=edpnet.gw.be.it2go.eu
/ip hotspot user profile
set [ find default=yes ] idle-timeout=none keepalive-timeout=2m \
    mac-cookie-timeout=3d
/ip ipsec proposal
set [ find default=yes ] enc-algorithms=3des
/ip pool
add name="DHCP Servers" ranges=10.200.0.10-10.200.0.254
/port
set 0 name=serial0
/interface pppoe-client
add ac-name="" add-default-route=yes allow=pap,chap,mschap1,mschap2 \
    default-route-distance=1 dial-on-demand=no disabled=no interface=\
    "ether10 - EDPnet" keepalive-timeout=60 max-mru=1480 max-mtu=1480 mrru=\
    disabled name="PPPoE - EDPnet" password=xxxxxxxxxx profile=default \
    service-name="" use-peer-dns=no user=xxxxxxxxxx@EDPNETFIX
/ip neighbor discovery
set "PPPoE - EDPnet" discover=no
/routing ospf instance
set [ find default=yes ] distribute-default=if-installed-as-type-1 \
    redistribute-connected=as-type-1 router-id=192.168.5.251
/system logging action
set 0 memory-lines=100
set 1 disk-lines-per-file=100
/interface bridge port
add interface="ether01 - Servers1"
add interface="ether02 - Servers2"
/interface bridge settings
set use-ip-firewall=yes
/ip address
add address=85.234.197.62/26 comment="IP Range Servers" interface=\
    "bonding EDPnet Server" network=85.234.197.0
add address=192.168.5.251/24 comment="Crosslink OpenWEB" interface=\
    "sfp01 - Cross" network=192.168.5.0
/ip dhcp-client
add add-default-route=no comment="DHCP Client Modem" dhcp-options=\
    hostname,clientid disabled=no interface="ether09 - Modem"
/ip dns
set servers=8.8.8.8,8.8.4.4
/ip firewall connection tracking
set enabled=yes
/ip firewall filter
add action=drop chain=input dst-port=53 in-interface="PPPoE - EDPnet" \
    protocol=udp
add action=drop chain=input dst-port=53 in-interface="PPPoE - EDPnet" \
    protocol=tcp
add action=drop chain=input dst-port=123 in-interface="PPPoE - EDPnet" \
    protocol=udp
add action=drop chain=input dst-port=123 in-interface="PPPoE - EDPnet" \
    protocol=tcp
/ip firewall nat
add action=masquerade chain=srcnat comment="masquerade modem network" \
    dst-address=192.168.2.0/24 to-addresses=0.0.0.0
/ip proxy
set parent-proxy=0.0.0.0
/ip route
add distance=110 dst-address=217.145.41.147/32 gateway=192.168.5.252
/ip service
set telnet disabled=yes port=1223
set ftp disabled=yes
set www port=8080
set ssh port=8022
set api disabled=yes
/ip upnp
set allow-disable-external-interface=no
/ipv6 address
add address=2a02:578:8401:700::1 advertise=no
/lcd
set backlight-timeout=15m default-screen=informative-slideshow \
    read-only-mode=yes
/lcd interface
set "ether01 - Servers1" interface="ether01 - Servers1"
set "ether02 - Servers2" interface="ether02 - Servers2"
set "ether03 - Raspi1" interface="ether03 - Raspi1"
set "ether04 - Raspi2" interface="ether04 - Raspi2"
set ether05 interface=ether05
set ether06 interface=ether06
set ether07 interface=ether07
set "ether08 - Ripe Probe" interface="ether08 - Ripe Probe"
set "ether09 - Modem" interface="ether09 - Modem"
set "ether10 - EDPnet" interface="ether10 - EDPnet"
set "sfp01 - Cross" interface="sfp01 - Cross"
/lcd screen
set 0 timeout=3s
set 1 timeout=3s
set 2 timeout=3s
set 3 timeout=3s
set 4 timeout=3s
set 5 timeout=3s
/routing ospf interface
add interface="sfp01 - Cross" network-type=broadcast
/routing ospf network
add area=backbone network=192.168.5.0/24
/system clock
set time-zone-name=Europe/Brussels
/system identity
set name="EDPnet Router"
/system lcd
set contrast=0 enabled=no port=parallel type=24x4
/system lcd page
set time disabled=no display-time=3s
set resources disabled=no display-time=3s
set uptime disabled=no display-time=3s
set packets disabled=no display-time=3s
set bits disabled=no display-time=3s
set version disabled=no display-time=3s
set identity disabled=no display-time=3s
set "sfp01 - Cross" disabled=yes display-time=5s
set "ether01 - Servers1" disabled=yes display-time=5s
set "ether02 - Servers2" disabled=yes display-time=5s
set "ether03 - Raspi1" disabled=yes display-time=5s
set "ether04 - Raspi2" disabled=yes display-time=5s
set ether05 disabled=yes display-time=5s
set ether06 disabled=yes display-time=5s
set ether07 disabled=yes display-time=5s
set "ether08 - Ripe Probe" disabled=yes display-time=5s
set "ether09 - Modem" disabled=yes display-time=5s
set "PPPoE - EDPnet" disabled=yes display-time=5s
set "ether10 - EDPnet" disabled=no display-time=3s
set "bonding EDPnet Server" disabled=yes display-time=5s
/system leds
add interface="sfp01 - Cross" leds="" type=interface-status
/system ntp client
set enabled=yes primary-ntp=46.28.43.66 secondary-ntp=195.130.132.18
/system ntp server
set manycast=no
/system scheduler
add interval=1d name=schedule1 on-event=e-mail-backup policy=\
    ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive,api \
    start-date=feb/24/2013 start-time=00:00:00
/system script
add name=e-mail-backup policy=\
    ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive,api \
    source="/system backup save name=email;\
    \n\r\
    \n/system backup save name=export;\r\
    \n/tool e-mail send to=\"info@it2go.eu\" subject=([/system identity get na\
    me].\" backup MikroTikBackup\") file=email.backup;\r\
    \n/tool e-mail send to=\"info@it2go.eu\" subject=([/system identity get na\
    me].\" export MikroTikBackup\") file=export.backup;\r\
    \n\
    \n:log info \"Backup e-mail sent.\";"
/tool e-mail
set address=185.18.148.148 from=<mikrotik@fusa.be> port=587
/tool graphing interface
add
/tool graphing resource
add
/tool sniffer
set filter-stream=yes