API tools faq
paste
Guest User

Untitled

a guest
Feb 15th, 2013
102
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.33 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2009.08-dirty (Nov 16 2012 - 16:26:09)
  2.  
  3. CPU: Freescale i.MX6 family TO1.1 at 792 MHz
  4. Temperature: 18 C, calibration data 0x5754d97d
  5. mx6q pll1: 792MHz
  6. mx6q pll2: 528MHz
  7. mx6q pll3: 480MHz
  8. mx6q pll8: 50MHz
  9. ipg clock : 66000000Hz
  10. ipg per clock : 66000000Hz
  11. uart clock : 80000000Hz
  12. cspi clock : 60000000Hz
  13. ahb clock : 132000000Hz
  14. axi clock : 264000000Hz
  15. emi_slow clock: 29333333Hz
  16. ddr clock : 528000000Hz
  17. usdhc1 clock : 198000000Hz
  18. usdhc2 clock : 198000000Hz
  19. usdhc3 clock : 198000000Hz
  20. usdhc4 clock : 198000000Hz
  21. nfc clock : 24000000Hz
  22. Board: i.MX6Q-RICHTECHIE: unknown-board Board: 0x63011 [POR]
  23. Boot Device: SD
  24. I2C: ready
  25. DRAM: 1 GB
  26. MMC: FSL_ESDHC: 0,FSL_ESDHC: 1
  27. Error: re-tried 100 times without response. Give up
  28. *** Warning - bad CRC, using default environment
  29.  
  30. In: serial
  31. Out: serial
  32. Err: serial
  33. check key.....
  34. Checking for recovery command file...
  35. ** Bad partition 6 **
  36. normal boot...
  37. Net: got MAC address from IIM: 00:00:00:00:00:00
  38. FEC0 [PRIME]
  39. Hit any key to stop autoboot: 0
  40. MX6Q Richtechie U-Boot > mmc dev 1
  41. mmc1 is current device
  42. MX6Q Richtechie U-Boot > mmc read ${loadaddr} 0x800 0x4000
  43. MMC read: dev # 1, block # 2048, count 16384 ... 16384 blocks read: OK
  44. MX6Q Richtechie U-Boot > bootm
  45. ## Booting kernel from Legacy Image at 10800000 ...
  46. Image Name: Linux-3.0.35-02668-g57d055a-dirt
  47. Image Type: ARM Linux Kernel Image (uncompressed)
  48. Data Size: 4391912 Bytes = 4.2 MB
  49. Load Address: 10008000
  50. Entry Point: 10008000
  51. Verifying Checksum ... OK
  52. Loading Kernel Image ... OK
  53. OK
  54.  
  55. Starting kernel ...
  56.  
  57. [ 0.000000] Initializing cgroup subsys cpuset
  58. [ 0.000000] Initializing cgroup subsys cpu
  59. [ 0.000000] Linux version 3.0.35-02668-g57d055a-dirty (rz2k@ubuntu) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-1ubuntu1) ) #5 SMP PREEMPT Fri Feb 15 03:37:42 PST 2013
  60. [ 0.000000] CPU identified as i.MX6Q, silicon rev 1.1
  61. [ 0.000000] PERCPU: Embedded 7 pages/cpu @cc008000 s5792 r8192 d14688 u32768
  62. [ 0.000000] Kernel command line: console=ttymxc3,115200 androidboot.console=ttymxc3 init=/init rw video=mxcfb0:dev=hdmi,1280x720M@60 fbmem=30M vmalloc=512M enable_wait_mode=off
  63. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  64. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  65. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  66. [ 0.000000] Memory: 576MB 226MB = 802MB total
  67. [ 0.000000] Memory: 803580k/803580k available, 244996k reserved, 526336K highmem
  68. [ 0.000000] Virtual kernel memory layout:
  69. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  70. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  71. [ 0.000000] DMA : 0xf4600000 - 0xffe00000 ( 184 MB)
  72. [ 0.000000] vmalloc : 0xd2800000 - 0xf2000000 ( 504 MB)
  73. [ 0.000000] lowmem : 0xc0000000 - 0xd2000000 ( 288 MB)
  74. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  75. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  76. [ 0.000000] .init : 0xc0008000 - 0xc0042000 ( 232 kB)
  77. [ 0.000000] .text : 0xc0042000 - 0xc080f234 (7989 kB)
  78. [ 0.000000] .data : 0xc0810000 - 0xc08642e0 ( 337 kB)
  79. [ 0.000000] .bss : 0xc0864304 - 0xc08b52b4 ( 324 kB)
  80. [ 0.000000] Preemptible hierarchical RCU implementation.
  81. [ 0.000000] NR_IRQS:496
  82. [ 0.000000] MXC GPIO hardware
  83. [ 0.000000] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
  84. [ 0.000000] arm_max_freq=0
  85. [ 0.000000] MXC_Early serial console at MMIO 0x21f0000 (options '115200')
  86. [ 0.000000] bootconsole [ttymxc3] enabled
  87. [ 0.000000] kmemleak: Early log buffer exceeded, please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE
  88. [ 0.000000] kmemleak: Kernel memory leak detector disabled
  89. [ 0.196927] Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
  90. [ 0.289534] pid_max: default: 32768 minimum: 301
  91. [ 0.294426] Mount-cache hash table entries: 512
  92. [ 0.299668] Initializing cgroup subsys cpuacct
  93. [ 0.304201] CPU: Testing write buffer coherency: ok
  94. [ 0.309399] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  95. [ 0.609444] Brought up 4 CPUs
  96. [ 0.612432] SMP: Total of 4 processors activated (6324.22 BogoMIPS).
  97. [ 0.641709] print_constraints: dummy:
  98. [ 0.645734] NET: Registered protocol family 16
  99. [ 0.654548] print_constraints: vddpu: 725 <--> 1300 mV at 1100 mV fast normal
  100. [ 0.662147] print_constraints: vddcore: 725 <--> 1300 mV at 1100 mV fast normal
  101. [ 0.669937] print_constraints: vddsoc: 725 <--> 1300 mV at 1100 mV fast normal
  102. [ 0.677620] print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
  103. [ 0.685387] print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
  104. [ 0.693097] print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal
  105. [ 0.708296] cpu regulator init ldo=0
  106. [ 0.712998] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  107. [ 0.719832] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  108. [ 0.727177] hw-breakpoint: maximum watchpoint size is 4 bytes.
  109. [ 0.733078] L310 cache controller enabled
  110. [ 0.737106] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x02070000, Cache size: 1048576 B
  111. [ 0.776303] bio: create slab <bio-0> at 0
  112. [ 0.781007] print_constraints: vmmc: 3300 mV
  113. [ 0.786523] SCSI subsystem initialized
  114. [ 0.790625] spi_imx imx6q-ecspi.1: probed
  115. [ 0.795422] usbcore: registered new interface driver usbfs
  116. [ 0.801079] usbcore: registered new interface driver hub
  117. [ 0.806567] usbcore: registered new device driver usb
  118. [ 0.811646] Freescale USB OTG Driver loaded, $Revision: 1.55 $
  119. [ 0.839435] imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  120. [ 0.859429] imx-ipuv3 imx-ipuv3.1: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  121. [ 0.867325] MIPI CSI2 driver module loaded
  122. [ 0.871693] Advanced Linux Sound Architecture Driver Version 1.0.24.
  123. [ 0.878940] Bluetooth: Core ver 2.16
  124. [ 0.882675] NET: Registered protocol family 31
  125. [ 0.887134] Bluetooth: HCI device and connection manager initialized
  126. [ 0.893519] Bluetooth: HCI socket layer initialized
  127. [ 0.898414] Bluetooth: L2CAP socket layer initialized
  128. [ 0.903551] Bluetooth: SCO socket layer initialized
  129. [ 0.908892] cfg80211: Calling CRDA to update world regulatory domain
  130. [ 0.916255] Switching to clocksource mxc_timer1
  131. [ 0.921046] FS-Cache: Loaded
  132. [ 0.925936] NET: Registered protocol family 2
  133. [ 0.930581] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  134. [ 0.938481] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  135. [ 0.946744] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  136. [ 0.954779] TCP: Hash tables configured (established 65536 bind 65536)
  137. [ 0.961338] TCP reno registered
  138. [ 0.964498] UDP hash table entries: 256 (order: 1, 8192 bytes)
  139. [ 0.970364] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  140. [ 0.977072] NET: Registered protocol family 1
  141. [ 0.981835] RPC: Registered named UNIX socket transport module.
  142. [ 0.987777] RPC: Registered udp transport module.
  143. [ 0.992511] RPC: Registered tcp transport module.
  144. [ 0.997231] RPC: Registered tcp NFSv4.1 backchannel transport module.
  145. [ 1.004750] Static Power Management for Freescale i.MX6
  146. [ 1.009994] wait mode is disabled for i.MX6
  147. [ 1.014361] cpaddr = d2880000 suspend_iram_base=d28ec000
  148. [ 1.019770] PM driver module loaded
  149. [ 1.023491] IMX usb wakeup probe
  150. [ 1.027150] add wake up source irq 75
  151. [ 1.034439] IMX usb wakeup probe
  152. [ 1.037917] cpu regulator init ldo=0
  153. [ 1.041573] i.MXC CPU frequency driver
  154. [ 1.057989] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  155. [ 1.063966] FS-Cache: Netfs 'nfs' registered for caching
  156. [ 1.069583] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  157. [ 1.076370] NTFS driver 2.1.30 [Flags: R/W].
  158. [ 1.080994] fuse init (API version 7.16)
  159. [ 1.085484] msgmni has been set to 541
  160. [ 1.090239] io scheduler noop registered
  161. [ 1.094195] io scheduler deadline registered
  162. [ 1.098540] io scheduler cfq registered (default)
  163. [ 1.103956] mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver hdmi
  164. [ 1.110461] mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
  165. [ 1.117389] fbcvt: 1280x720@60: CVT Name - .921M9
  166. [ 1.190916] imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
  167. [ 1.202258] imx-sdma imx-sdma: loaded firmware 1.1
  168. [ 1.212035] imx-sdma imx-sdma: initialized
  169. [ 1.348673] Serial: IMX driver
  170. [ 1.351877] imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
  171. [ 1.358807] imx-uart.3: ttymxc3 at MMIO 0x21f0000 (irq = 61) is a IMX
  172. [ 1.365305] console [ttymxc3] enabled, bootconsole disabled
  173. [ 1.365305] console [ttymxc3] enabled, bootconsole disabled
  174. [ 1.379283] [drm] Initialized drm 1.1.0 20060810
  175. [ 1.384538] [drm] Initialized vivante 1.0.0 20120216 on minor 0
  176. [ 1.394321] loop: module loaded
  177. [ 1.398329] vcan: Virtual CAN interface driver
  178. [ 1.402804] CAN device driver interface
  179. [ 1.406659] FEC Ethernet Driver
  180. [ 1.410024] PPP generic driver version 2.4.2
  181. [ 1.414789] PPP Deflate Compression module registered
  182. [ 1.419848] PPP BSD Compression module registered
  183. [ 1.425047] PPP MPPE Compression module registered
  184. [ 1.429845] NET: Registered protocol family 24
  185. [ 1.434330] PPTP driver version 0.8.5
  186. [ 1.438324] tun: Universal TUN/TAP device driver, 1.6
  187. [ 1.443398] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  188. [ 1.450494] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  189. [ 1.457219] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
  190. [ 1.463873] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
  191. [ 1.500879] fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
  192. [ 1.520863] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
  193. [ 1.527172] hub 1-0:1.0: USB hub found
  194. [ 1.530952] hub 1-0:1.0: 1 port detected
  195. [ 1.535105] add wake up source irq 72
  196. [ 1.538812] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
  197. [ 1.545461] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
  198. [ 1.580875] fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200
  199. [ 1.600862] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
  200. [ 1.607090] hub 2-0:1.0: USB hub found
  201. [ 1.610867] hub 2-0:1.0: 1 port detected
  202. [ 1.615227] usbcore: registered new interface driver cdc_acm
  203. [ 1.620904] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  204. [ 1.629055] usbcore: registered new interface driver usblp
  205. [ 1.634789] usbcore: registered new interface driver cdc_wdm
  206. [ 1.640585] usbcore: registered new interface driver usbtmc
  207. [ 1.646304] usbcore: registered new interface driver uas
  208. [ 1.651631] Initializing USB Mass Storage driver...
  209. [ 1.656692] usbcore: registered new interface driver usb-storage
  210. [ 1.662714] USB Mass Storage support registered.
  211. [ 1.667622] usbcore: registered new interface driver usbserial
  212. [ 1.673601] USB Serial support registered for generic
  213. [ 1.678809] usbcore: registered new interface driver usbserial_generic
  214. [ 1.685353] usbserial: USB Serial Driver core
  215. [ 1.689838] USB Serial support registered for cp210x
  216. [ 1.694974] usbcore: registered new interface driver cp210x
  217. [ 1.700551] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
  218. [ 1.707477] USB Serial support registered for FTDI USB Serial Device
  219. [ 1.714107] usbcore: registered new interface driver ftdi_sio
  220. [ 1.719858] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
  221. [ 1.725839] USB Serial support registered for GSM modem (1-port)
  222. [ 1.732084] usbcore: registered new interface driver option
  223. [ 1.737661] option: v0.7.2:USB Driver for GSM modems
  224. [ 1.742768] USB Serial support registered for pl2303
  225. [ 1.747890] usbcore: registered new interface driver pl2303
  226. [ 1.753479] pl2303: Prolific PL2303 USB to serial adaptor driver
  227. [ 1.759615] USB Serial support registered for Qualcomm USB modem
  228. [ 1.765796] usbcore: registered new interface driver qcserial
  229. [ 1.771561] ARC USBOTG Device Controller driver (1 August 2005)
  230. [ 1.777942] my_batt_ext_power_changed!
  231. [ 1.781710] It is not usb supply!
  232. [ 1.785273] g_ether gadget: using random self ethernet address
  233. [ 1.791136] g_ether gadget: using random host ethernet address
  234. [ 1.797956] usb0: MAC c6:6f:6a:46:f2:b3
  235. [ 1.801812] usb0: HOST MAC 36:74:2d:c1:ca:fe
  236. [ 1.806089] g_ether gadget: controller 'fsl-usb2-udc' not recognized; trying CDC Ethernet (EEM)
  237. [ 1.814830] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
  238. [ 1.821467] g_ether gadget: g_ether ready
  239. [ 1.825478] Suspend udc for OTG auto detect
  240. [ 1.829667] fsl-usb2-udc: bind to driver g_ether
  241. [ 1.834946] mousedev: PS/2 mouse device common for all mice
  242. [ 1.841024] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  243. [ 1.848844] i2c-core: driver [isl29023] using legacy suspend method
  244. [ 1.855129] i2c-core: driver [isl29023] using legacy resume method
  245. [ 1.862374] snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc0
  246. [ 1.869056] i2c /dev entries driver
  247. [ 1.873174] Linux media interface: v0.10
  248. [ 1.877232] Linux video capture interface: v2.00
  249. [ 1.882291] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
  250. [ 1.889938] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
  251. [ 1.897485] gspca: v2.13.0 registered
  252. [ 1.901322] usbcore: registered new interface driver uvcvideo
  253. [ 1.907072] USB Video Class driver (v1.1.0)
  254. [ 1.911749] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
  255. [ 1.919873] Bluetooth: Virtual HCI driver ver 1.3
  256. [ 1.924852] Bluetooth: HCI UART driver ver 2.2
  257. [ 1.929301] Bluetooth: HCIATH3K protocol initialized
  258. [ 1.934281] Bluetooth: Generic Bluetooth USB driver ver 0.6
  259. [ 1.940012] usbcore: registered new interface driver btusb
  260. [ 1.945515] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  261. [ 1.951809] sdhci: Secure Digital Host Controller Interface driver
  262. [ 1.957993] sdhci: Copyright(c) Pierre Ossman
  263. [ 1.965728] mmc0: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA
  264. [ 1.976180] mmc1: SDHCI controller on platform [sdhci-esdhc-imx.1] using DMA
  265. [ 1.985053] mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
  266. [ 1.993160] VPU initialized
  267. [ 2.017624] Thermal calibration data is 0x5754d97d
  268. [ 2.042778] Anatop Thermal registered as thermal_zone0
  269. [ 2.048111] anatop_thermal_probe: default cooling device is cpufreq!
  270. [ 2.059118] HDMI CEC initialized
  271. [ 2.066430] usbcore: registered new interface driver usbhid
  272. [ 2.072020] usbhid: USB HID core driver
  273. [ 2.076335] usbcore: registered new interface driver snd-usb-audio
  274. [ 2.087167] mxc_hdmi_soc mxc_hdmi_soc.0: MXC HDMI Audio
  275. [ 2.095680] asoc: mxc-hdmi-soc <-> imx-hdmi-soc-dai.0 mapping ok
  276. [ 2.104491] ALSA device list:
  277. [ 2.113529] #0: imx-hdmi-soc
  278. [ 2.120986] Netfilter messages via NETLINK v0.30.
  279. [ 2.125760] nf_conntrack version 0.5.0 (12555 buckets, 50220 max)
  280. [ 2.134543] ctnetlink v0.93: registering with nfnetlink.
  281. [ 2.139909] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  282. [ 2.146889] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  283. [ 2.153992] xt_time: kernel timezone is -0000
  284. [ 2.159254] IPv4 over IPv4 tunneling driver
  285. [ 2.164811] GRE over IPv4 demultiplexor driver
  286. [ 2.169896] ip_tables: (C) 2000-2006 Netfilter Core Team
  287. [ 2.175612] arp_tables: (C) 2002 David S. Miller
  288. [ 2.180304] TCP cubic registered
  289. [ 2.184980] NET: Registered protocol family 10
  290. [ 2.193933] ip6_tables: (C) 2000-2006 Netfilter Core Team
  291. [ 2.199684] IPv6 over IPv4 tunneling driver
  292. [ 2.209070] NET: Registered protocol family 17
  293. [ 2.213563] NET: Registered protocol family 15
  294. [ 2.218023] can: controller area network core (rev 20090105 abi 8)
  295. [ 2.224302] NET: Registered protocol family 29
  296. [ 2.228751] can: raw protocol (rev 20090105)
  297. [ 2.233209] can: broadcast manager protocol (rev 20090105 t)
  298. [ 2.241013] Bluetooth: RFCOMM TTY layer initialized
  299. [ 2.245903] Bluetooth: RFCOMM socket layer initialized
  300. [ 2.251058] Bluetooth: RFCOMM ver 1.11
  301. [ 2.254811] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  302. [ 2.260125] Bluetooth: BNEP filters: protocol multicast
  303. [ 2.265365] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  304. [ 2.271502] L2TP core driver, V2.0
  305. [ 2.274924] PPPoL2TP kernel driver, V2.0
  306. [ 2.278850] L2TP IP encapsulation support (L2TPv3)
  307. [ 2.283710] L2TP netlink interface
  308. [ 2.287135] L2TP ethernet pseudowire support (L2TPv3)
  309. [ 2.292203] lib80211: common routines for IEEE802.11 drivers
  310. [ 2.298250] Registering the dns_resolver key type
  311. [ 2.303022] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  312. [ 2.312396] ThumbEE CPU extension supported.
  313. [ 2.316685] Registering SWP/SWPB emulation handler
  314. [ 2.321880] Bus freq driver module loaded
  315. [ 2.325898] Bus freq driver Enabled
  316. [ 2.331733] mxc_dvfs_core_probe
  317. [ 2.335102] DVFS driver module loaded
  318. [ 2.339828] snvs_rtc snvs_rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
  319. [ 2.348355] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!