Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 8.828868] ACPI: Power Button [PWRF]
- [ 8.830031] Monitor-Mwait will be used to enter C-1 state
- [ 8.830061] Monitor-Mwait will be used to enter C-2 state
- [ 8.830069] Marking TSC unstable due to TSC halts in idle
- [ 8.830078] ACPI: acpi_idle registered with cpuidle
- [ 9.742849] thermal LNXTHERM:00: registered as thermal_zone0
- [ 9.742853] ACPI: Thermal Zone [TZS0] (34 C)
- [ 9.748057] thermal LNXTHERM:01: registered as thermal_zone1
- [ 9.748060] ACPI: Thermal Zone [TZS1] (34 C)
- [ 9.748085] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 9.748096] ACPI: Battery Slot [BAT0] (battery absent)
- [ 9.748128] ACPI: Battery Slot [BAT0] (battery absent)
- [ 9.748133] ERST: Table is not found!
- [ 9.748135] GHES: HEST is not enabled!
- [ 9.748161] isapnp: Scanning for PnP cards...
- [ 9.748258] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 10.101186] isapnp: No Plug & Play device found
- [ 10.152491] Linux agpgart interface v0.103
- [ 10.154484] brd: module loaded
- [ 10.155422] loop: module loaded
- [ 10.155581] ahci 0000:00:1f.2: version 3.0
- [ 10.155603] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 10.155650] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
- [ 10.155732] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
- [ 10.155736] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs
- [ 10.155741] ahci 0000:00:1f.2: setting latency timer to 64
- [ 10.156657] scsi0 : ahci
- [ 10.156774] scsi1 : ahci
- [ 10.156871] scsi2 : ahci
- [ 10.156959] scsi3 : ahci
- [ 10.157050] scsi4 : ahci
- [ 10.157139] scsi5 : ahci
- [ 10.157208] ata1: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504100 irq 44
- [ 10.157212] ata2: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504180 irq 44
- [ 10.157214] ata3: DUMMY
- [ 10.157216] ata4: DUMMY
- [ 10.157219] ata5: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504300 irq 44
- [ 10.157222] ata6: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504380 irq 44
- [ 10.157733] Fixed MDIO Bus: probed
- [ 10.157756] tun: Universal TUN/TAP device driver, 1.6
- [ 10.157759] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 10.157845] PPP generic driver version 2.4.2
- [ 10.157983] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 10.158011] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
- [ 10.158036] ehci_hcd 0000:00:1a.7: setting latency timer to 64
- [ 10.158040] ehci_hcd 0000:00:1a.7: EHCI Host Controller
- [ 10.158098] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 10.158129] ehci_hcd 0000:00:1a.7: debug port 1
- [ 10.162009] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
- [ 10.162032] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf4504800
- [ 10.176014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 10.176163] hub 1-0:1.0: USB hub found
- [ 10.176168] hub 1-0:1.0: 4 ports detected
- [ 10.176254] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 10.176271] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 10.176274] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 10.176329] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 10.176354] ehci_hcd 0000:00:1d.7: debug port 1
- [ 10.180227] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
- [ 10.180244] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4504c00
- [ 10.196014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 10.196172] hub 2-0:1.0: USB hub found
- [ 10.196177] hub 2-0:1.0: 8 ports detected
- [ 10.196272] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 10.196289] uhci_hcd: USB Universal Host Controller Interface driver
- [ 10.196312] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 10.196320] uhci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 10.196324] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 10.196378] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 10.196403] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001800
- [ 10.196548] hub 3-0:1.0: USB hub found
- [ 10.196553] hub 3-0:1.0: 2 ports detected
- [ 10.196641] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
- [ 10.196649] uhci_hcd 0000:00:1a.1: setting latency timer to 64
- [ 10.196652] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 10.196705] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- [ 10.196729] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001820
- [ 10.196872] hub 4-0:1.0: USB hub found
- [ 10.196876] hub 4-0:1.0: 2 ports detected
- [ 10.196951] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 10.196959] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 10.196963] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 10.197015] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
- [ 10.197039] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
- [ 10.197180] hub 5-0:1.0: USB hub found
- [ 10.197184] hub 5-0:1.0: 2 ports detected
- [ 10.197257] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 10.197265] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 10.197268] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 10.197319] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
- [ 10.197354] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001860
- [ 10.197495] hub 6-0:1.0: USB hub found
- [ 10.197499] hub 6-0:1.0: 2 ports detected
- [ 10.197574] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 10.197581] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 10.197585] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 10.197638] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
- [ 10.197671] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
- [ 10.197811] hub 7-0:1.0: USB hub found
- [ 10.197816] hub 7-0:1.0: 2 ports detected
- [ 10.197890] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 18 (level, low) -> IRQ 18
- [ 10.197897] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 10.197901] uhci_hcd 0000:00:1d.3: UHCI Host Controller
- [ 10.197952] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
- [ 10.197975] uhci_hcd 0000:00:1d.3: irq 18, io base 0x000018a0
- [ 10.198122] hub 8-0:1.0: USB hub found
- [ 10.198126] hub 8-0:1.0: 2 ports detected
- [ 10.198268] usbcore: registered new interface driver libusual
- [ 10.198324] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 10.208132] i8042: Detected active multiplexing controller, rev 1.1
- [ 10.215776] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 10.215783] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 10.215818] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 10.215850] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 10.215880] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 10.216038] mousedev: PS/2 mouse device common for all mice
- [ 10.216315] rtc_cmos 00:08: RTC can wake from S4
- [ 10.216436] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
- [ 10.216462] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 10.216529] device-mapper: uevent: version 1.0.3
- [ 10.216615] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 10.216657] EISA: Probing bus 0 at eisa.0
- [ 10.216660] EISA: Cannot allocate resource for mainboard
- [ 10.216662] Cannot allocate resource for EISA slot 1
- [ 10.216664] Cannot allocate resource for EISA slot 2
- [ 10.216667] Cannot allocate resource for EISA slot 3
- [ 10.216669] Cannot allocate resource for EISA slot 4
- [ 10.216671] Cannot allocate resource for EISA slot 5
- [ 10.216673] Cannot allocate resource for EISA slot 6
- [ 10.216675] Cannot allocate resource for EISA slot 7
- [ 10.216678] Cannot allocate resource for EISA slot 8
- [ 10.216680] EISA: Detected 0 cards.
- [ 10.216691] cpufreq-nforce2: No nForce2 chipset.
- [ 10.216747] cpuidle: using governor ladder
- [ 10.216835] cpuidle: using governor menu
- [ 10.216837] EFI Variables Facility v0.08 2004-May-17
- [ 10.217143] TCP cubic registered
- [ 10.217285] NET: Registered protocol family 10
- [ 10.217930] NET: Registered protocol family 17
- [ 10.217935] Registering the dns_resolver key type
- [ 10.217958] Using IPI No-Shortcut mode
- [ 10.218124] PM: Hibernation image not present or could not be loaded.
- [ 10.218137] registered taskstats version 1
- [ 10.232818] Magic number: 4:671:636
- [ 10.232910] rtc_cmos 00:08: setting system clock to 2012-07-08 14:36:35 UTC (1341758195)
- [ 10.233498] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 10.233501] EDD information not available.
- [ 10.242157] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
- [ 10.498599] ata2: SATA link down (SStatus 0 SControl 300)
- [ 10.498629] ata5: SATA link down (SStatus 0 SControl 300)
- [ 10.552038] usb 2-5: new high-speed USB device number 2 using ehci_hcd
- [ 10.668049] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 10.669767] ata6.00: ATAPI: Slimtype DVD A DS8A3S, HA17, max UDMA/100
- [ 10.669801] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 10.670860] ata6.00: configured for UDMA/100
- [ 10.672439] ata1.00: ATA-8: WDC WD5000BEVT-22ZAT0, 01.01A01, max UDMA/133
- [ 10.672443] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 10.674094] ata1.00: configured for UDMA/133
- [ 10.674254] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-2 01.0 PQ: 0 ANSI: 5
- [ 10.674411] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 10.674438] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 10.674468] sd 0:0:0:0: [sda] Write Protect is off
- [ 10.674471] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 10.674496] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 10.677604] scsi 5:0:0:0: CD-ROM Slimtype DVD A DS8A3S HA17 PQ: 0 ANSI: 5
- [ 10.682319] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
- [ 10.682322] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 10.682473] sr 5:0:0:0: Attached scsi CD-ROM sr0
- [ 10.682559] sr 5:0:0:0: Attached scsi generic sg1 type 5
- [ 11.010751] sda: sda1 sda2 < sda5 >
- [ 11.011286] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 11.011410] Freeing unused kernel memory: 740k freed
- [ 11.011716] Write protecting the kernel text: 5816k
- [ 11.011745] Write protecting the kernel read-only data: 2376k
- [ 11.011747] NX-protecting the kernel data: 4424k
- [ 11.032530] udevd[101]: starting version 175
- [ 11.135766] tg3.c:v3.121 (November 2, 2011)
- [ 11.135940] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 11.144900] tg3 0000:02:00.0: setting latency timer to 64
- [ 11.166386] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:1f:16:a1:93:76
- [ 11.166391] tg3 0000:02:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
- [ 11.166395] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
- [ 11.166398] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
- [ 11.408150] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 24.834709] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 24.882020] Adding 4187132k swap on /dev/sda5. Priority:-1 extents:1 across:4187132k
- [ 24.955189] udevd[401]: starting version 175
- [ 25.005626] lp: driver loaded but no devices found
- [ 25.068546] wmi: Mapper loaded
- [ 25.120176] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
- [ 25.126853] acpi device:03: registered as cooling_device2
- [ 25.127059] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
- [ 25.127160] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
- [ 25.128064] [drm] Initialized drm 1.1.0 20060810
- [ 25.151433] type=1400 audit(1341758210.411:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=544 comm="apparmor_parser"
- [ 25.151951] type=1400 audit(1341758210.411:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=544 comm="apparmor_parser"
- [ 25.152269] type=1400 audit(1341758210.415:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=544 comm="apparmor_parser"
- [ 25.194309] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
- [ 25.194316] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
- [ 25.194336] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- [ 25.194393] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
- [ 25.194422] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
- [ 25.232308] [drm] radeon defaulting to kernel modesetting.
- [ 25.232313] [drm] radeon kernel modesetting enabled.
- [ 25.232390] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 25.232396] radeon 0000:01:00.0: setting latency timer to 64
- [ 25.232700] [drm] initializing kernel modesetting (RV710 0x1002:0x9553 0x1025:0x0261).
- [ 25.232738] [drm] register mmio base: 0xF4000000
- [ 25.232740] [drm] register mmio size: 65536
- [ 25.232941] ATOM BIOS: BR30866
- [ 25.232970] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
- [ 25.232974] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
- [ 25.241085] [drm] Detected VRAM RAM=512M, BAR=256M
- [ 25.241089] [drm] RAM width 64bits DDR
- [ 25.243287] [TTM] Zone kernel: Available graphics memory: 420446 kiB.
- [ 25.243290] [TTM] Zone highmem: Available graphics memory: 2058452 kiB.
- [ 25.243293] [TTM] Initializing pool allocator.
- [ 25.243320] [drm] radeon: 512M of VRAM memory ready
- [ 25.243323] [drm] radeon: 512M of GTT memory ready.
- [ 25.243343] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 25.243345] [drm] Driver supports precise vblank timestamp query.
- [ 25.243395] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
- [ 25.243402] radeon 0000:01:00.0: radeon: using MSI.
- [ 25.243439] [drm] radeon: irq initialized.
- [ 25.243445] [drm] GART: num cpu pages 131072, num gpu pages 131072
- [ 25.249256] cfg80211: Calling CRDA to update world regulatory domain
- [ 25.251469] [drm] Loading RV710 Microcode
- [ 25.263033] Linux video capture interface: v2.00
- [ 25.264690] uvcvideo: Found UVC 1.00 device Video WebCam (064e:a103)
- [ 25.282579] input: Video WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input5
- [ 25.282739] usbcore: registered new interface driver uvcvideo
- [ 25.282742] USB Video Class driver (1.1.1)
- [ 25.285681] hda_codec: ALC888: BIOS auto-probing.
- [ 25.293955] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 25.293968] ath9k 0000:03:00.0: setting latency timer to 64
- [ 25.538628] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
- [ 25.538801] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
- [ 25.538951] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
- [ 25.571931] acer_wmi: Acer Laptop ACPI-WMI Extras
- [ 25.613749] acer_wmi: Function bitmap for Communication Device: 0x83
- [ 25.614284] acer_wmi: Brightness must be controlled by generic video driver
- [ 25.665910] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
- [ 25.665997] radeon 0000:01:00.0: WB enabled
- [ 25.684889] cfg80211: World regulatory domain updated:
- [ 25.684893] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 25.684897] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 25.684900] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 25.684903] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 25.684906] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 25.684909] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 25.727333] ath: EEPROM regdomain: 0x65
- [ 25.727336] ath: EEPROM indicates we should expect a direct regpair map
- [ 25.727340] ath: Country alpha2 being used: 00
- [ 25.727342] ath: Regpair used: 0x65
- [ 25.731008] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 25.731013] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 25.731016] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 25.731019] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 25.731022] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 25.731025] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 25.731028] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 25.731031] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 25.731033] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 25.731036] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 25.731039] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 25.731042] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 25.731044] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 25.731047] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 25.731050] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 25.731053] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 25.731056] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 25.731059] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 25.731061] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 25.731064] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 25.731067] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 25.731070] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 25.731072] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 25.731075] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 25.731078] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 25.731081] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 25.731084] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
- [ 25.733616] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 25.738554] [drm] ring test succeeded in 1 usecs
- [ 25.738772] [drm] radeon: ib pool ready.
- [ 25.738869] [drm] ib test succeeded in 0 usecs
- [ 25.752767] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
- [ 25.753017] [drm] Radeon Display Connectors
- [ 25.753021] [drm] Connector 0:
- [ 25.753023] [drm] LVDS
- [ 25.753026] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
- [ 25.753028] [drm] Encoders:
- [ 25.753030] [drm] LCD1: INTERNAL_UNIPHY2
- [ 25.753032] [drm] Connector 1:
- [ 25.753034] [drm] VGA
- [ 25.753036] [drm] DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
- [ 25.753038] [drm] Encoders:
- [ 25.753040] [drm] CRT2: INTERNAL_KLDSCP_DAC2
- [ 25.753042] [drm] Connector 2:
- [ 25.753043] [drm] HDMI-A
- [ 25.753045] [drm] HPD1
- [ 25.753047] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
- [ 25.753049] [drm] Encoders:
- [ 25.753051] [drm] DFP1: INTERNAL_UNIPHY
- [ 25.753053] [drm] Connector 3:
- [ 25.753054] [drm] DisplayPort
- [ 25.753056] [drm] HPD3
- [ 25.753058] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
- [ 25.753061] [drm] Encoders:
- [ 25.753062] [drm] DFP2: INTERNAL_UNIPHY
- [ 25.753159] [drm] radeon: power management initialized
- [ 25.754314] Registered led device: ath9k-phy0
- [ 25.754325] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf8680000, irq=17
- [ 25.841137] Bluetooth: Core ver 2.16
- [ 25.844150] NET: Registered protocol family 31
- [ 25.844155] Bluetooth: HCI device and connection manager initialized
- [ 25.844159] Bluetooth: HCI socket layer initialized
- [ 25.844161] Bluetooth: L2CAP socket layer initialized
- [ 25.844171] Bluetooth: SCO socket layer initialized
- [ 25.871708] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 25.871711] Bluetooth: BNEP filters: protocol multicast
- [ 25.882567] Bluetooth: RFCOMM TTY layer initialized
- [ 25.882576] Bluetooth: RFCOMM socket layer initialized
- [ 25.882578] Bluetooth: RFCOMM ver 1.11
- [ 25.948231] ppdev: user-space parallel port driver
- [ 25.983459] init: failsafe main process (809) killed by TERM signal
- [ 26.023467] type=1400 audit(1341758211.283:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=868 comm="apparmor_parser"
- [ 26.026198] type=1400 audit(1341758211.287:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=868 comm="apparmor_parser"
- [ 26.117208] type=1400 audit(1341758211.379:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=912 comm="apparmor_parser"
- [ 26.119061] type=1400 audit(1341758211.379:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=913 comm="apparmor_parser"
- [ 26.126371] type=1400 audit(1341758211.387:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=913 comm="apparmor_parser"
- [ 26.126655] type=1400 audit(1341758211.387:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=913 comm="apparmor_parser"
- [ 26.134939] tg3 0000:02:00.0: irq 47 for MSI/MSI-X
- [ 26.160143] type=1400 audit(1341758211.423:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=914 comm="apparmor_parser"
- [ 26.244250] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 26.245022] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 26.252838] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 26.654781] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
- [ 26.710008] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
- [ 26.776705] [drm] fb mappable at 0xD0142000
- [ 26.776708] [drm] vram apper at 0xD0000000
- [ 26.776710] [drm] size 5787648
- [ 26.776712] [drm] fb depth is 24
- [ 26.776714] [drm] pitch is 6400
- [ 26.776915] fbcon: radeondrmfb (fb0) is primary device
- [ 26.777805] Console: switching to colour frame buffer device 200x56
- [ 26.777854] fb0: radeondrmfb frame buffer device
- [ 26.777856] drm: registered panic notifier
- [ 26.777867] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
- [ 26.777922] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 26.778011] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
- [ 26.778040] snd_hda_intel 0000:01:00.1: setting latency timer to 64
- [ 26.827996] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
- [ 26.828143] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
- [ 29.331089] tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
- [ 29.331094] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
- [ 29.331270] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 4020.521279] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
- [14110.136093] usb 2-3: new high-speed USB device number 3 using ehci_hcd
- [14110.304809] Initializing USB Mass Storage driver...
- [14110.304978] scsi6 : usb-storage 2-3:1.0
- [14110.305075] usbcore: registered new interface driver usb-storage
- [14110.305077] USB Mass Storage support registered.
- [14110.319918] usbcore: registered new interface driver uas
- [14111.319528] scsi 6:0:0:0: Direct-Access Samsung S2 Portable PQ: 0 ANSI: 2 CCS
- [14111.321410] sd 6:0:0:0: Attached scsi generic sg2 type 0
- [14111.324573] sd 6:0:0:0: [sdb] 488386584 1024-byte logical blocks: (500 GB/465 GiB)
- [14111.325739] sd 6:0:0:0: [sdb] Write Protect is off
- [14111.325746] sd 6:0:0:0: [sdb] Mode Sense: 3c 00 00 00
- [14111.326816] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [14111.328509] sd 6:0:0:0: [sdb] 488386584 1024-byte logical blocks: (500 GB/465 GiB)
- [14111.351977] sdb: sdb1
- [14111.353223] sd 6:0:0:0: [sdb] 488386584 1024-byte logical blocks: (500 GB/465 GiB)
- [14111.354730] sd 6:0:0:0: [sdb] Attached SCSI disk
- [14486.292738] usb 2-3: USB disconnect, device number 3
- [15242.797085] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
- [15242.799896] SGI XFS Quota Management subsystem
- [15242.851781] JFS: nTxBlock = 8192, nTxLock = 65536
- [15242.901395] NTFS driver 2.1.30 [Flags: R/O MODULE].
- [15242.962853] QNX4 filesystem 0.2.3 registered.
- [15243.057967] Btrfs loaded
- [15645.192093] usb 1-4: new high-speed USB device number 2 using ehci_hcd
- [15645.337732] scsi7 : usb-storage 1-4:1.2
- [15645.768023] Did not find alt setting 1 for intf 0, config 1
- [15646.338944] scsi 7:0:0:0: Direct-Access EPSON Stylus Storage 1.00 PQ: 0 ANSI: 2
- [15646.340652] sd 7:0:0:0: Attached scsi generic sg2 type 0
- [15646.348690] sd 7:0:0:0: [sdb] Attached SCSI removable disk
- [15658.389301] usb 1-4: USB disconnect, device number 2
- [15769.008082] usb 2-3: new high-speed USB device number 4 using ehci_hcd
- [15769.143641] scsi8 : usb-storage 2-3:1.0
- [15770.140904] scsi 8:0:0:0: Direct-Access CBM Flash Disk 5.00 PQ: 0 ANSI: 2
- [15770.142516] sd 8:0:0:0: Attached scsi generic sg2 type 0
- [15770.145493] sd 8:0:0:0: [sdb] 4131840 512-byte logical blocks: (2.11 GB/1.96 GiB)
- [15770.145987] sd 8:0:0:0: [sdb] Write Protect is off
- [15770.145995] sd 8:0:0:0: [sdb] Mode Sense: 0b 00 00 08
- [15770.147626] sd 8:0:0:0: [sdb] No Caching mode page present
- [15770.147633] sd 8:0:0:0: [sdb] Assuming drive cache: write through
- [15770.150860] sd 8:0:0:0: [sdb] No Caching mode page present
- [15770.150866] sd 8:0:0:0: [sdb] Assuming drive cache: write through
- [15770.151548] sdb: sdb1
- [15770.154468] sd 8:0:0:0: [sdb] No Caching mode page present
- [15770.154473] sd 8:0:0:0: [sdb] Assuming drive cache: write through
- [15770.154477] sd 8:0:0:0: [sdb] Attached SCSI removable disk
- [15803.393305] sdb: detected capacity change from 2115502080 to 0
- [15806.044785] usb 2-3: USB disconnect, device number 4
- giulia@giulia-Aspire-7735:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement