Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 3.7.3-gentoo (root@Galactica) (gcc version 4.7.2 (Gentoo 4.7.2 p1.3, pie-0.5.5) ) #1 SMP Sat Jan 19 03:51:48 CET 2013
- [ 0.000000] Command line: BOOT_IMAGE=/kernel-3.7.3-gentoo root=/dev/sda3 ro clocksource=tsc console=ttyS0,115200n8 coretemp.tjmax=90 intel_idle.max_cstate=1 nf_conntrack.nf_conntrack_helper=0 rootfstype=ext4 usr=/dev/sda7
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009afff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009b000-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffdffff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x7ffe0 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [mem 0x000fe100-0x000fe10f] mapped at [ffff8800000fe100]
- [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
- [ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x7ffdffff]
- [ 0.000000] [mem 0x00000000-0x7fdfffff] page 2M
- [ 0.000000] [mem 0x7fe00000-0x7ffdffff] page 4k
- [ 0.000000] kernel direct mapping tables up to 0x7ffdffff @ [mem 0x1fffc000-0x1fffffff]
- [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009afff]
- [ 0.000000] node 0: [mem 0x00100000-0x7ffdffff]
- [ 0.000000] On node 0 totalpages: 524154
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 6 pages reserved
- [ 0.000000] DMA zone: 3932 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 7112 pages used for memmap
- [ 0.000000] DMA32 zone: 513048 pages, LIFO batch:31
- [ 0.000000] Intel MultiProcessor Specification v1.4
- [ 0.000000] MPTABLE: OEM ID: Soekris
- [ 0.000000] MPTABLE: Product ID: net6501
- [ 0.000000] MPTABLE: APIC at: 0xFEE00000
- [ 0.000000] Processor #0 (Bootup-CPU)
- [ 0.000000] Processor #1
- [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] Processors: 2
- [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] e820: [mem 0x80000000-0xfebfffff] available for PCI devices
- [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88007fc00000 s72960 r8192 d21248 u1048576
- [ 0.000000] pcpu-alloc: s72960 r8192 d21248 u1048576 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516980
- [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-3.7.3-gentoo root=/dev/sda3 ro clocksource=tsc console=ttyS0,115200n8 coretemp.tjmax=90 intel_idle.max_cstate=1 nf_conntrack.nf_conntrack_helper=0 rootfstype=ext4 usr=/dev/sda7
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Memory: 2057780k/2097024k available (4481k kernel code, 408k absent, 38836k reserved, 1426k data, 352k init)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:4352 nr_irqs:512 16
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [ttyS0] enabled
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 1600.112 MHz processor
- [ 0.010003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.22 BogoMIPS (lpj=16001120)
- [ 0.022878] pid_max: default: 32768 minimum: 301
- [ 0.026210] Mount-cache hash table entries: 256
- [ 0.030373] CPU: Physical Processor ID: 0
- [ 0.033064] CPU: Processor Core ID: 0
- [ 0.035409] mce: CPU supports 5 MCE banks
- [ 0.038110] CPU0: Thermal monitoring enabled (TM1)
- [ 0.040010] process: using mwait in idle threads
- [ 0.043319] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
- Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
- tlb_flushall_shift: 6
- [ 0.050125] Freeing SMP alternatives: 20k freed
- [ 0.060324] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.165037] smpboot: CPU0: Genuine Intel(R) CPU @ 1.60GHz (fam: 06, model: 26, stepping: 01)
- [ 0.289980] Performance Events: PEBS fmt0+, generic architected perfmon, Intel PMU driver.
- [ 0.290000] ... version: 3
- [ 0.290000] ... bit width: 40
- [ 0.290003] ... generic registers: 2
- [ 0.292692] ... value mask: 000000ffffffffff
- [ 0.296680] ... max period: 000000007fffffff
- [ 0.300002] ... fixed-purpose events: 3
- [ 0.302690] ... event mask: 0000000700000003
- [ 0.310357] smpboot: Booting Node 0, Processors #1 OK
- [ 0.020000] Disabled fast string operations
- [ 0.330039] Brought up 2 CPUs
- [ 0.340007] smpboot: Total of 2 processors activated (6400.44 BogoMIPS)
- [ 0.345423] devtmpfs: initialized
- [ 0.345423] NET: Registered protocol family 16
- [ 0.350157] PCI: Using configuration type 1 for base access
- [ 0.370187] bio: create slab <bio-0> at 0
- [ 0.372765] SCSI subsystem initialized
- [ 0.372765] libata version 3.00 loaded.
- [ 0.372765] usbcore: registered new interface driver usbfs
- [ 0.380039] usbcore: registered new interface driver hub
- [ 0.384034] usbcore: registered new device driver usb
- [ 0.390119] PCI: Probing PCI hardware
- [ 0.392456] PCI: root bus 00: using default resources
- [ 0.392459] PCI: Probing PCI hardware (bus 00)
- [ 0.392529] PCI host bridge to bus 0000:00
- [ 0.392913] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
- [ 0.400021] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
- [ 0.405571] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 0.410032] pci 0000:00:00.0: [8086:4114] type 00 class 0x060000
- [ 0.410091] pci 0000:00:01.0: [8086:8183] type 00 class 0x060000
- [ 0.410145] pci 0000:00:01.0: Enabled HPET at 0xfed00000
- [ 0.410212] pci 0000:00:17.0: [8086:8184] type 01 class 0x060400
- [ 0.410317] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
- [ 0.410354] pci 0000:00:18.0: [8086:8185] type 01 class 0x060400
- [ 0.410457] pci 0000:00:18.0: PME# supported from D0 D3hot D3cold
- [ 0.410493] pci 0000:00:19.0: [8086:8180] type 01 class 0x060400
- [ 0.410595] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
- [ 0.410630] pci 0000:00:1a.0: [8086:8181] type 01 class 0x060400
- [ 0.410733] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.410772] pci 0000:00:1f.0: [8086:8186] type 00 class 0x060100
- [ 0.410955] pci 0000:01:00.0: [8086:8800] type 01 class 0x060400
- [ 0.411011] pci 0000:01:00.0: reg 38: [mem 0x00000000-0x0000ffff pref]
- [ 0.411091] pci 0000:01:00.0: supports D1
- [ 0.411095] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
- [ 0.430035] pci 0000:00:17.0: PCI bridge to [bus 01-02]
- [ 0.433945] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
- [ 0.433952] pci 0000:00:17.0: bridge window [mem 0xa0000000-0xa0ffffff]
- [ 0.434053] pci 0000:02:00.0: [8086:8801] type 00 class 0xff0000
- [ 0.434111] pci 0000:02:00.0: reg 14: [mem 0xa0000000-0xa00007ff]
- [ 0.434202] pci 0000:02:00.0: reg 30: [mem 0x98000000-0x9801ffff pref]
- [ 0.434330] pci 0000:02:00.1: [8086:8802] type 00 class 0x020000
- [ 0.434373] pci 0000:02:00.1: reg 10: [io 0x1000-0x101f]
- [ 0.434395] pci 0000:02:00.1: reg 14: [mem 0xa0000800-0xa00009ff]
- [ 0.434563] pci 0000:02:00.1: PME# supported from D0
- [ 0.434616] pci 0000:02:00.2: [8086:8803] type 00 class 0xff0000
- [ 0.434676] pci 0000:02:00.2: reg 14: [mem 0xa0000a00-0xa0000a3f]
- [ 0.434845] pci 0000:02:00.2: PME# supported from D0
- [ 0.434911] pci 0000:02:02.0: [8086:8804] type 00 class 0x0c0310
- [ 0.434954] pci 0000:02:02.0: reg 10: [mem 0xa0000b00-0xa0000bff]
- [ 0.435140] pci 0000:02:02.0: PME# supported from D0 D3hot
- [ 0.435192] pci 0000:02:02.1: [8086:8805] type 00 class 0x0c0310
- [ 0.435234] pci 0000:02:02.1: reg 10: [mem 0xa0000c00-0xa0000cff]
- [ 0.435419] pci 0000:02:02.1: PME# supported from D0 D3hot
- [ 0.435471] pci 0000:02:02.2: [8086:8806] type 00 class 0x0c0310
- [ 0.435513] pci 0000:02:02.2: reg 10: [mem 0xa0000d00-0xa0000dff]
- [ 0.435699] pci 0000:02:02.2: PME# supported from D0 D3hot
- [ 0.435760] pci 0000:02:02.3: [8086:8807] type 00 class 0x0c0320
- [ 0.435807] pci 0000:02:02.3: reg 10: [mem 0xa0000e00-0xa0000eff]
- [ 0.436007] pci 0000:02:02.3: PME# supported from D0 D3hot
- [ 0.436064] pci 0000:02:02.4: [8086:8808] type 00 class 0x0c03fe
- [ 0.436123] pci 0000:02:02.4: reg 14: [mem 0xa0002000-0xa0003fff]
- [ 0.436292] pci 0000:02:02.4: PME# supported from D0
- [ 0.436356] pci 0000:02:04.0: [8086:8809] type 00 class 0x080501
- [ 0.436399] pci 0000:02:04.0: reg 10: [mem 0xa0004000-0xa00041ff]
- [ 0.436627] pci 0000:02:04.1: [8086:880a] type 00 class 0x080501
- [ 0.436670] pci 0000:02:04.1: reg 10: [mem 0xa0004200-0xa00043ff]
- [ 0.436924] pci 0000:02:06.0: [8086:880b] type 00 class 0x010601
- [ 0.437040] pci 0000:02:06.0: reg 20: [io 0x1020-0x103f]
- [ 0.437061] pci 0000:02:06.0: reg 24: [mem 0xa0004400-0xa00047ff]
- [ 0.437084] pci 0000:02:06.0: reg 30: [mem 0x98000000-0x9801ffff pref]
- [ 0.437232] pci 0000:02:08.0: [8086:880c] type 00 class 0x0c0310
- [ 0.437274] pci 0000:02:08.0: reg 10: [mem 0xa0004800-0xa00048ff]
- [ 0.437460] pci 0000:02:08.0: PME# supported from D0 D3hot
- [ 0.437514] pci 0000:02:08.1: [8086:880d] type 00 class 0x0c0310
- [ 0.437556] pci 0000:02:08.1: reg 10: [mem 0xa0004900-0xa00049ff]
- [ 0.437742] pci 0000:02:08.1: PME# supported from D0 D3hot
- [ 0.437794] pci 0000:02:08.2: [8086:880e] type 00 class 0x0c0310
- [ 0.437836] pci 0000:02:08.2: reg 10: [mem 0xa0004a00-0xa0004aff]
- [ 0.438022] pci 0000:02:08.2: PME# supported from D0 D3hot
- [ 0.438080] pci 0000:02:08.3: [8086:880f] type 00 class 0x0c0320
- [ 0.438128] pci 0000:02:08.3: reg 10: [mem 0xa0004b00-0xa0004bff]
- [ 0.438331] pci 0000:02:08.3: PME# supported from D0 D3hot
- [ 0.438411] pci 0000:02:0a.0: [8086:8810] type 00 class 0xff0000
- [ 0.438476] pci 0000:02:0a.0: reg 14: [mem 0xa0004c00-0xa0004cff]
- [ 0.438711] pci 0000:02:0a.1: [8086:8811] type 00 class 0x070002
- [ 0.438753] pci 0000:02:0a.1: reg 10: [io 0x1040-0x1047]
- [ 0.438775] pci 0000:02:0a.1: reg 14: [mem 0xa0004d00-0xa0004d0f]
- [ 0.438944] pci 0000:02:0a.1: PME# supported from D0
- [ 0.438996] pci 0000:02:0a.2: [8086:8812] type 00 class 0x070002
- [ 0.439038] pci 0000:02:0a.2: reg 10: [io 0x1048-0x104f]
- [ 0.439060] pci 0000:02:0a.2: reg 14: [mem 0xa0004d10-0xa0004d1f]
- [ 0.439274] pci 0000:02:0a.3: [8086:8813] type 00 class 0x070002
- [ 0.439317] pci 0000:02:0a.3: reg 10: [io 0x1050-0x1057]
- [ 0.439339] pci 0000:02:0a.3: reg 14: [mem 0xa0004d20-0xa0004d2f]
- [ 0.439550] pci 0000:02:0a.4: [8086:8814] type 00 class 0x070002
- [ 0.439592] pci 0000:02:0a.4: reg 10: [io 0x1058-0x105f]
- [ 0.439614] pci 0000:02:0a.4: reg 14: [mem 0xa0004d30-0xa0004d3f]
- [ 0.439845] pci 0000:02:0c.0: [8086:8815] type 00 class 0xff0000
- [ 0.439909] pci 0000:02:0c.0: reg 14: [mem 0xa0004e00-0xa0004eff]
- [ 0.440203] pci 0000:02:0c.1: [8086:8816] type 00 class 0x0c8000
- [ 0.440264] pci 0000:02:0c.1: reg 14: [mem 0xa0004f00-0xa0004f1f]
- [ 0.440476] pci 0000:02:0c.2: [8086:8817] type 00 class 0x0c8000
- [ 0.440536] pci 0000:02:0c.2: reg 14: [mem 0xa0005000-0xa00050ff]
- [ 0.440747] pci 0000:02:0c.3: [8086:8818] type 00 class 0x0c0900
- [ 0.440806] pci 0000:02:0c.3: reg 14: [mem 0xa0005200-0xa00053ff]
- [ 0.441019] pci 0000:02:0c.4: [8086:8819] type 00 class 0xff0000
- [ 0.441079] pci 0000:02:0c.4: reg 14: [mem 0xa0005400-0xa00054ff]
- [ 0.441331] pci 0000:01:00.0: PCI bridge to [bus 02]
- [ 0.444989] pci 0000:01:00.0: bridge window [io 0x1000-0x1fff]
- [ 0.444998] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xa0ffffff]
- [ 0.445098] pci 0000:03:00.0: [111d:803a] type 01 class 0x060400
- [ 0.445224] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
- [ 0.460022] pci 0000:00:18.0: PCI bridge to [bus 03-07]
- [ 0.463933] pci 0000:00:18.0: bridge window [io 0x2000-0x3fff]
- [ 0.463941] pci 0000:00:18.0: bridge window [mem 0xa1000000-0xa3ffffff]
- [ 0.464036] pci 0000:04:02.0: [111d:803a] type 01 class 0x060400
- [ 0.464183] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
- [ 0.464234] pci 0000:04:03.0: [111d:803a] type 01 class 0x060400
- [ 0.464378] pci 0000:04:03.0: PME# supported from D0 D3hot D3cold
- [ 0.464433] pci 0000:04:04.0: [111d:803a] type 01 class 0x060400
- [ 0.464577] pci 0000:04:04.0: PME# supported from D0 D3hot D3cold
- [ 0.464667] pci 0000:03:00.0: PCI bridge to [bus 04-07]
- [ 0.468580] pci 0000:03:00.0: bridge window [io 0x2000-0x3fff]
- [ 0.468589] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa3ffffff]
- [ 0.468716] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000
- [ 0.468752] pci 0000:05:00.0: reg 10: [mem 0xa1000000-0xa101ffff]
- [ 0.468803] pci 0000:05:00.0: reg 18: [io 0x2000-0x201f]
- [ 0.468830] pci 0000:05:00.0: reg 1c: [mem 0xa1020000-0xa1023fff]
- [ 0.469040] pci 0000:05:00.0: PME# supported from D0 D3hot
- [ 0.469115] pci 0000:04:02.0: PCI bridge to [bus 05]
- [ 0.470021] pci 0000:04:02.0: bridge window [io 0x2000-0x2fff]
- [ 0.470030] pci 0000:04:02.0: bridge window [mem 0xa1000000-0xa1ffffff]
- [ 0.470163] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000
- [ 0.470199] pci 0000:06:00.0: reg 10: [mem 0xa2000000-0xa201ffff]
- [ 0.470249] pci 0000:06:00.0: reg 18: [io 0x3000-0x301f]
- [ 0.470277] pci 0000:06:00.0: reg 1c: [mem 0xa2020000-0xa2023fff]
- [ 0.470487] pci 0000:06:00.0: PME# supported from D0 D3hot
- [ 0.470562] pci 0000:04:03.0: PCI bridge to [bus 06]
- [ 0.474214] pci 0000:04:03.0: bridge window [io 0x3000-0x3fff]
- [ 0.474222] pci 0000:04:03.0: bridge window [mem 0xa2000000-0xa2ffffff]
- [ 0.474341] pci 0000:07:00.0: [168c:0030] type 00 class 0x028000
- [ 0.474380] pci 0000:07:00.0: reg 10: [mem 0xa3000000-0xa301ffff 64bit]
- [ 0.474471] pci 0000:07:00.0: reg 30: [mem 0x98000000-0x9800ffff pref]
- [ 0.474568] pci 0000:07:00.0: supports D1
- [ 0.474572] pci 0000:07:00.0: PME# supported from D0 D1 D3hot
- [ 0.474626] pci 0000:04:04.0: PCI bridge to [bus 07]
- [ 0.480019] pci 0000:04:04.0: bridge window [mem 0xa3000000-0xa3ffffff]
- [ 0.480161] pci 0000:08:00.0: [111d:803a] type 01 class 0x060400
- [ 0.480288] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
- [ 0.500017] pci 0000:00:19.0: PCI bridge to [bus 08-0c]
- [ 0.503928] pci 0000:00:19.0: bridge window [io 0x4000-0x5fff]
- [ 0.503935] pci 0000:00:19.0: bridge window [mem 0xa4000000-0xa5ffffff]
- [ 0.504034] pci 0000:09:02.0: [111d:803a] type 01 class 0x060400
- [ 0.504180] pci 0000:09:02.0: PME# supported from D0 D3hot D3cold
- [ 0.504234] pci 0000:09:03.0: [111d:803a] type 01 class 0x060400
- [ 0.504378] pci 0000:09:03.0: PME# supported from D0 D3hot D3cold
- [ 0.504431] pci 0000:09:04.0: [111d:803a] type 01 class 0x060400
- [ 0.504575] pci 0000:09:04.0: PME# supported from D0 D3hot D3cold
- [ 0.504664] pci 0000:08:00.0: PCI bridge to [bus 09-0c]
- [ 0.508581] pci 0000:08:00.0: bridge window [io 0x4000-0x5fff]
- [ 0.508589] pci 0000:08:00.0: bridge window [mem 0xa4000000-0xa5ffffff]
- [ 0.508719] pci 0000:0a:00.0: [8086:10d3] type 00 class 0x020000
- [ 0.508755] pci 0000:0a:00.0: reg 10: [mem 0xa4000000-0xa401ffff]
- [ 0.508805] pci 0000:0a:00.0: reg 18: [io 0x4000-0x401f]
- [ 0.508832] pci 0000:0a:00.0: reg 1c: [mem 0xa4020000-0xa4023fff]
- [ 0.509043] pci 0000:0a:00.0: PME# supported from D0 D3hot
- [ 0.509117] pci 0000:09:02.0: PCI bridge to [bus 0a]
- [ 0.510015] pci 0000:09:02.0: bridge window [io 0x4000-0x4fff]
- [ 0.510024] pci 0000:09:02.0: bridge window [mem 0xa4000000-0xa4ffffff]
- [ 0.510154] pci 0000:0b:00.0: [8086:10d3] type 00 class 0x020000
- [ 0.510189] pci 0000:0b:00.0: reg 10: [mem 0xa5000000-0xa501ffff]
- [ 0.510239] pci 0000:0b:00.0: reg 18: [io 0x5000-0x501f]
- [ 0.510267] pci 0000:0b:00.0: reg 1c: [mem 0xa5020000-0xa5023fff]
- [ 0.510477] pci 0000:0b:00.0: PME# supported from D0 D3hot
- [ 0.510552] pci 0000:09:03.0: PCI bridge to [bus 0b]
- [ 0.514203] pci 0000:09:03.0: bridge window [io 0x5000-0x5fff]
- [ 0.514212] pci 0000:09:03.0: bridge window [mem 0xa5000000-0xa5ffffff]
- [ 0.514299] pci 0000:09:04.0: PCI bridge to [bus 0c]
- [ 0.520124] pci 0000:00:1a.0: PCI bridge to [bus 0d]
- [ 0.523810] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 0d
- [ 0.530267] pci 0000:00:1f.0: default IRQ router [8086:8186]
- [ 0.534608] PCI: pci_cache_line_size set to 64 bytes
- [ 0.534889] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff]
- [ 0.534895] e820: reserve RAM buffer [mem 0x7ffe0000-0x7fffffff]
- [ 0.540376] hpet clockevent registered
- [ 0.540376] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.546112] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.550114] Switching to clocksource hpet
- [ 0.552837] cfg80211: World regulatory domain updated:
- [ 0.553879] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 0.560778] cfg80211: (2402000 KHz - 2494000 KHz @ 40000 KHz), (N/A, 3500 mBm)
- [ 0.566852] cfg80211: (4910000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3500 mBm)
- [ 0.576006] pci 0000:02:00.0: no compatible bridge window for [mem 0x98000000-0x9801ffff pref]
- [ 0.583420] pci 0000:02:06.0: no compatible bridge window for [mem 0x98000000-0x9801ffff pref]
- [ 0.590757] pci 0000:07:00.0: no compatible bridge window for [mem 0x98000000-0x9800ffff pref]
- [ 0.598084] pci 0000:00:17.0: bridge window [mem 0x00100000-0x002fffff pref] to [bus 01-02] add_size 200000
- [ 0.598151] pci 0000:00:18.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 03-07] add_size 200000
- [ 0.598217] pci 0000:00:19.0: bridge window [mem 0x00100000-0x000fffff pref] to [bus 08-0c] add_size 200000
- [ 0.598227] pci 0000:00:1a.0: bridge window [io 0x1000-0x0fff] to [bus 0d] add_size 1000
- [ 0.598233] pci 0000:00:1a.0: bridge window [mem 0x00100000-0x000fffff pref] to [bus 0d] add_size 200000
- [ 0.598239] pci 0000:00:1a.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0d] add_size 200000
- [ 0.598252] pci 0000:00:17.0: res[9]=[mem 0x00100000-0x002fffff pref] get_res_add_size add_size 200000
- [ 0.598258] pci 0000:00:18.0: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
- [ 0.598263] pci 0000:00:19.0: res[9]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000
- [ 0.598268] pci 0000:00:1a.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
- [ 0.598274] pci 0000:00:1a.0: res[9]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000
- [ 0.598279] pci 0000:00:1a.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
- [ 0.598289] pci 0000:00:17.0: BAR 9: assigned [mem 0x80000000-0x803fffff pref]
- [ 0.604223] pci 0000:00:18.0: BAR 9: assigned [mem 0x80400000-0x806fffff pref]
- [ 0.610144] pci 0000:00:19.0: BAR 9: assigned [mem 0x80700000-0x808fffff pref]
- [ 0.616039] pci 0000:00:1a.0: BAR 8: assigned [mem 0x80900000-0x80afffff]
- [ 0.621530] pci 0000:00:1a.0: BAR 9: assigned [mem 0x80b00000-0x80cfffff pref]
- [ 0.627427] pci 0000:00:1a.0: BAR 7: assigned [io 0x6000-0x6fff]
- [ 0.632231] pci 0000:01:00.0: BAR 9: assigned [mem 0x80000000-0x800fffff pref]
- [ 0.638131] pci 0000:01:00.0: BAR 6: assigned [mem 0x80100000-0x8010ffff pref]
- [ 0.644064] pci 0000:02:00.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
- [ 0.649962] pci 0000:02:06.0: BAR 6: assigned [mem 0x80020000-0x8003ffff pref]
- [ 0.655894] pci 0000:01:00.0: PCI bridge to [bus 02]
- [ 0.659542] pci 0000:01:00.0: bridge window [io 0x1000-0x1fff]
- [ 0.664348] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xa0ffffff]
- [ 0.669819] pci 0000:01:00.0: bridge window [mem 0x80000000-0x800fffff pref]
- [ 0.675755] pci 0000:00:17.0: PCI bridge to [bus 01-02]
- [ 0.679667] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
- [ 0.684472] pci 0000:00:17.0: bridge window [mem 0xa0000000-0xa0ffffff]
- [ 0.689943] pci 0000:00:17.0: bridge window [mem 0x80000000-0x803fffff pref]
- [ 0.695878] pci 0000:03:00.0: BAR 9: assigned [mem 0x80400000-0x804fffff pref]
- [ 0.701805] pci 0000:04:04.0: BAR 9: assigned [mem 0x80400000-0x804fffff pref]
- [ 0.707697] pci 0000:04:02.0: PCI bridge to [bus 05]
- [ 0.711366] pci 0000:04:02.0: bridge window [io 0x2000-0x2fff]
- [ 0.716146] pci 0000:04:02.0: bridge window [mem 0xa1000000-0xa1ffffff]
- [ 0.721649] pci 0000:04:03.0: PCI bridge to [bus 06]
- [ 0.725298] pci 0000:04:03.0: bridge window [io 0x3000-0x3fff]
- [ 0.730103] pci 0000:04:03.0: bridge window [mem 0xa2000000-0xa2ffffff]
- [ 0.735587] pci 0000:07:00.0: BAR 6: assigned [mem 0x80400000-0x8040ffff pref]
- [ 0.741511] pci 0000:04:04.0: PCI bridge to [bus 07]
- [ 0.745164] pci 0000:04:04.0: bridge window [mem 0xa3000000-0xa3ffffff]
- [ 0.750655] pci 0000:04:04.0: bridge window [mem 0x80400000-0x804fffff pref]
- [ 0.756560] pci 0000:03:00.0: PCI bridge to [bus 04-07]
- [ 0.760492] pci 0000:03:00.0: bridge window [io 0x2000-0x3fff]
- [ 0.765271] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa3ffffff]
- [ 0.770762] pci 0000:03:00.0: bridge window [mem 0x80400000-0x804fffff pref]
- [ 0.776666] pci 0000:00:18.0: PCI bridge to [bus 03-07]
- [ 0.780597] pci 0000:00:18.0: bridge window [io 0x2000-0x3fff]
- [ 0.785373] pci 0000:00:18.0: bridge window [mem 0xa1000000-0xa3ffffff]
- [ 0.790871] pci 0000:00:18.0: bridge window [mem 0x80400000-0x806fffff pref]
- [ 0.796771] pci 0000:09:02.0: PCI bridge to [bus 0a]
- [ 0.800444] pci 0000:09:02.0: bridge window [io 0x4000-0x4fff]
- [ 0.805223] pci 0000:09:02.0: bridge window [mem 0xa4000000-0xa4ffffff]
- [ 0.810727] pci 0000:09:03.0: PCI bridge to [bus 0b]
- [ 0.814374] pci 0000:09:03.0: bridge window [io 0x5000-0x5fff]
- [ 0.819152] pci 0000:09:03.0: bridge window [mem 0xa5000000-0xa5ffffff]
- [ 0.824661] pci 0000:09:04.0: PCI bridge to [bus 0c]
- [ 0.828325] pci 0000:08:00.0: PCI bridge to [bus 09-0c]
- [ 0.832258] pci 0000:08:00.0: bridge window [io 0x4000-0x5fff]
- [ 0.837037] pci 0000:08:00.0: bridge window [mem 0xa4000000-0xa5ffffff]
- [ 0.842539] pci 0000:00:19.0: PCI bridge to [bus 08-0c]
- [ 0.846447] pci 0000:00:19.0: bridge window [io 0x4000-0x5fff]
- [ 0.851250] pci 0000:00:19.0: bridge window [mem 0xa4000000-0xa5ffffff]
- [ 0.856715] pci 0000:00:19.0: bridge window [mem 0x80700000-0x808fffff pref]
- [ 0.862647] pci 0000:00:1a.0: PCI bridge to [bus 0d]
- [ 0.866293] pci 0000:00:1a.0: bridge window [io 0x6000-0x6fff]
- [ 0.871089] pci 0000:00:1a.0: bridge window [mem 0x80900000-0x80afffff]
- [ 0.876553] pci 0000:00:1a.0: bridge window [mem 0x80b00000-0x80cfffff pref]
- [ 0.882507] pci 0000:00:17.0: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 0.887729] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
- [ 0.893392] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 0.898612] pci 0000:00:18.0: PCI->APIC IRQ transform: INT A -> IRQ 17
- [ 0.903891] pci 0000:00:19.0: PCI->APIC IRQ transform: INT A -> IRQ 18
- [ 0.909141] pci 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 19
- [ 0.914378] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
- [ 0.914383] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
- [ 0.914388] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
- [ 0.914393] pci_bus 0000:01: resource 1 [mem 0xa0000000-0xa0ffffff]
- [ 0.914397] pci_bus 0000:01: resource 2 [mem 0x80000000-0x803fffff pref]
- [ 0.914402] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
- [ 0.914407] pci_bus 0000:02: resource 1 [mem 0xa0000000-0xa0ffffff]
- [ 0.914411] pci_bus 0000:02: resource 2 [mem 0x80000000-0x800fffff pref]
- [ 0.914416] pci_bus 0000:03: resource 0 [io 0x2000-0x3fff]
- [ 0.914421] pci_bus 0000:03: resource 1 [mem 0xa1000000-0xa3ffffff]
- [ 0.914426] pci_bus 0000:03: resource 2 [mem 0x80400000-0x806fffff pref]
- [ 0.914430] pci_bus 0000:04: resource 0 [io 0x2000-0x3fff]
- [ 0.914435] pci_bus 0000:04: resource 1 [mem 0xa1000000-0xa3ffffff]
- [ 0.914439] pci_bus 0000:04: resource 2 [mem 0x80400000-0x804fffff pref]
- [ 0.914444] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
- [ 0.914449] pci_bus 0000:05: resource 1 [mem 0xa1000000-0xa1ffffff]
- [ 0.914453] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
- [ 0.914458] pci_bus 0000:06: resource 1 [mem 0xa2000000-0xa2ffffff]
- [ 0.914463] pci_bus 0000:07: resource 1 [mem 0xa3000000-0xa3ffffff]
- [ 0.914467] pci_bus 0000:07: resource 2 [mem 0x80400000-0x804fffff pref]
- [ 0.914472] pci_bus 0000:08: resource 0 [io 0x4000-0x5fff]
- [ 0.914476] pci_bus 0000:08: resource 1 [mem 0xa4000000-0xa5ffffff]
- [ 0.914481] pci_bus 0000:08: resource 2 [mem 0x80700000-0x808fffff pref]
- [ 0.914486] pci_bus 0000:09: resource 0 [io 0x4000-0x5fff]
- [ 0.914490] pci_bus 0000:09: resource 1 [mem 0xa4000000-0xa5ffffff]
- [ 0.914495] pci_bus 0000:0a: resource 0 [io 0x4000-0x4fff]
- [ 0.914499] pci_bus 0000:0a: resource 1 [mem 0xa4000000-0xa4ffffff]
- [ 0.914504] pci_bus 0000:0b: resource 0 [io 0x5000-0x5fff]
- [ 0.914508] pci_bus 0000:0b: resource 1 [mem 0xa5000000-0xa5ffffff]
- [ 0.914513] pci_bus 0000:0d: resource 0 [io 0x6000-0x6fff]
- [ 0.914518] pci_bus 0000:0d: resource 1 [mem 0x80900000-0x80afffff]
- [ 0.914522] pci_bus 0000:0d: resource 2 [mem 0x80b00000-0x80cfffff pref]
- [ 0.914569] NET: Registered protocol family 2
- [ 0.917920] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- [ 0.928707] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.935289] TCP: Hash tables configured (established 262144 bind 65536)
- [ 0.940780] TCP: reno registered
- [ 0.942708] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.947419] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.952737] NET: Registered protocol family 1
- [ 0.956183] RPC: Registered named UNIX socket transport module.
- [ 0.960806] RPC: Registered udp transport module.
- [ 0.964189] RPC: Registered tcp transport module.
- [ 0.967572] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.972803] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
- [ 0.978436] pci 0000:02:02.0: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 0.983729] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
- [ 0.989363] pci 0000:02:02.1: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 0.994640] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
- [ 1.000296] pci 0000:02:02.2: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 1.005547] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
- [ 1.011216] pci 0000:02:02.3: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 1.016593] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
- [ 1.022260] pci 0000:02:08.0: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 1.027507] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
- [ 1.033170] pci 0000:02:08.1: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 1.038418] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
- [ 1.044081] pci 0000:02:08.2: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 1.049328] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
- [ 1.054993] pci 0000:02:08.3: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 1.060562] PCI: CLS 32 bytes, default 64
- [ 1.060986] platform rtc_cmos: registered platform RTC device (no PNP device found)
- [ 1.067877] microcode: CPU0 sig=0x20661, pf=0x2, revision=0x104
- [ 1.072492] microcode: CPU1 sig=0x20661, pf=0x2, revision=0x104
- [ 1.077595] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 1.087305] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 1.097546] alg: No test for stdrng (krng)
- [ 1.100584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 1.106659] io scheduler noop registered (default)
- [ 1.110339] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
- [ 1.115977] pch_gpio 0000:02:00.2: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 1.124566] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
- [ 1.410141] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a TI16750
- [ 1.415626] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
- [ 1.421305] serial 0000:02:0a.1: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 1.426870] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
- [ 1.432541] serial 0000:02:0a.2: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 1.438096] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
- [ 1.443762] serial 0000:02:0a.3: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 1.449315] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
- [ 1.454985] serial 0000:02:0a.4: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 1.460938] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
- [ 1.466577] pch_uart 0000:02:0a.1: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 1.472334] pch_uart 0000:02:0a.1: irq 40 for MSI/MSI-X
- [ 1.472375] pch_uart 0000:02:0a.1: setting latency timer to 64
- [ 1.472417] 0000:02:0a.1: ttyPCH0 at I/O 0x1040 (irq = 40) is a pch_uart
- [ 1.478536] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
- [ 1.484217] pch_uart 0000:02:0a.2: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 1.489924] pch_uart 0000:02:0a.2: irq 41 for MSI/MSI-X
- [ 1.489960] pch_uart 0000:02:0a.2: setting latency timer to 64
- [ 1.490018] 0000:02:0a.2: ttyPCH1 at I/O 0x1048 (irq = 41) is a pch_uart
- [ 1.495987] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
- [ 1.501656] pch_uart 0000:02:0a.3: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 1.507359] pch_uart 0000:02:0a.3: irq 42 for MSI/MSI-X
- [ 1.507394] pch_uart 0000:02:0a.3: setting latency timer to 64
- [ 1.507426] 0000:02:0a.3: ttyPCH2 at I/O 0x1050 (irq = 42) is a pch_uart
- [ 1.513374] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
- [ 1.519010] pch_uart 0000:02:0a.4: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 1.524751] pch_uart 0000:02:0a.4: irq 43 for MSI/MSI-X
- [ 1.524844] pch_uart 0000:02:0a.4: setting latency timer to 64
- [ 1.524885] 0000:02:0a.4: ttyPCH3 at I/O 0x1058 (irq = 43) is a pch_uart
- [ 1.531861] Real Time Clock Driver v1.12b
- [ 1.564899] intel_idle: MWAIT substates: 0x3020220
- [ 1.564916] intel_idle: v0.4 model 0x26
- [ 1.564919] intel_idle: lapic_timer_reliable_states 0x2
- [ 1.564921] intel_idle: max_cstate 1 reached
- [ 1.567890] intel_idle: max_cstate 1 reached
- [ 1.570903] intel_idle: max_cstate 1 reached
- [ 1.573925] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
- [ 1.579559] pch-dma 0000:02:0a.0: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 1.585175] pch-dma 0000:02:0a.0: setting latency timer to 64
- [ 1.589476] pci 0000:01:00.0: using bridge 0000:00:17.0 INT C to get IRQ 18
- [ 1.595148] pch-dma 0000:02:0c.0: PCI->APIC IRQ transform: INT C -> IRQ 18
- [ 1.600757] pch-dma 0000:02:0c.0: setting latency timer to 64
- [ 1.603811] loop: module loaded
- [ 1.609138] ahci 0000:02:06.0: version 3.0
- [ 1.609166] pci 0000:01:00.0: using bridge 0000:00:17.0 INT B to get IRQ 17
- [ 1.614835] ahci 0000:02:06.0: PCI->APIC IRQ transform: INT B -> IRQ 17
- [ 1.620333] ahci 0000:02:06.0: irq 44 for MSI/MSI-X
- [ 1.620399] ahci: SSS flag set, parallel bus scan disabled
- [ 1.624624] ahci 0000:02:06.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
- [ 1.631504] ahci 0000:02:06.0: flags: ncq sntf stag pm led clo only pmp pio slum part ccc
- [ 1.638448] ahci 0000:02:06.0: setting latency timer to 64
- [ 1.640205] scsi0 : ahci
- [ 1.643380] scsi1 : ahci
- [ 1.645733] ata1: SATA max UDMA/133 abar m1024@0xa0004400 port 0xa0004500 irq 44
- [ 1.651924] ata2: SATA max UDMA/133 abar m1024@0xa0004400 port 0xa0004580 irq 44
- [ 1.658370] tun: Universal TUN/TAP device driver, 1.6
- [ 1.662145] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.667228] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
- [ 1.671786] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
- [ 1.676439] e1000e 0000:05:00.0: Disabling ASPM L0s L1
- [ 1.680307] pcieport 0000:03:00.0: using bridge 0000:00:18.0 INT C to get IRQ 19
- [ 1.686379] e1000e 0000:05:00.0: PCI->APIC IRQ transform: INT C -> IRQ 19
- [ 1.692029] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- [ 1.700160] e1000e 0000:05:00.0: irq 45 for MSI/MSI-X
- [ 1.700172] e1000e 0000:05:00.0: irq 46 for MSI/MSI-X
- [ 1.700182] e1000e 0000:05:00.0: irq 47 for MSI/MSI-X
- [ 1.824183] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:00:24:ce:bb:1c
- [ 1.830813] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection
- [ 1.836449] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
- [ 1.841878] e1000e 0000:06:00.0: Disabling ASPM L0s L1
- [ 1.845720] pcieport 0000:03:00.0: using bridge 0000:00:18.0 INT D to get IRQ 16
- [ 1.851818] e1000e 0000:06:00.0: PCI->APIC IRQ transform: INT D -> IRQ 16
- [ 1.857433] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- [ 1.865570] e1000e 0000:06:00.0: irq 48 for MSI/MSI-X
- [ 1.865582] e1000e 0000:06:00.0: irq 49 for MSI/MSI-X
- [ 1.865592] e1000e 0000:06:00.0: irq 50 for MSI/MSI-X
- [ 1.984496] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:00:24:ce:bb:1d
- [ 1.991137] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection
- [ 1.996775] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
- [ 2.002211] e1000e 0000:0a:00.0: Disabling ASPM L0s L1
- [ 2.002265] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.002574] ata1.00: ATA-7: INTEL SSDMAEMC080G2, 2CV102M3, max UDMA/133
- [ 2.002579] ata1.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
- [ 2.002667] ata1.00: failed to get Identify Device Data, Emask 0x1
- [ 2.003102] ata1.00: failed to get Identify Device Data, Emask 0x1
- [ 2.003109] ata1.00: configured for UDMA/133
- [ 2.020292] scsi 0:0:0:0: Direct-Access ATA INTEL SSDMAEMC08 2CV1 PQ: 0 ANSI: 5
- [ 2.020932] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
- [ 2.021162] sd 0:0:0:0: [sda] Write Protect is off
- [ 2.021167] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.021242] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.026183] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
- [ 2.035525] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 2.057237] pcieport 0000:08:00.0: using bridge 0000:00:19.0 INT C to get IRQ 16
- [ 2.063337] e1000e 0000:0a:00.0: PCI->APIC IRQ transform: INT C -> IRQ 16
- [ 2.068958] e1000e 0000:0a:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- [ 2.077096] e1000e 0000:0a:00.0: irq 51 for MSI/MSI-X
- [ 2.077108] e1000e 0000:0a:00.0: irq 52 for MSI/MSI-X
- [ 2.077118] e1000e 0000:0a:00.0: irq 53 for MSI/MSI-X
- [ 2.077377] tsc: Refined TSC clocksource calibration: 1599.999 MHz
- [ 2.082262] Override clocksource tsc is not HRT compatible. Cannot switch while in HRT/NOHZ mode
- [ 2.089713] Switching to clocksource tsc
- [ 2.194477] e1000e 0000:0a:00.0 eth2: (PCI Express:2.5GT/s:Width x1) 00:00:24:ce:bb:1e
- [ 2.201119] e1000e 0000:0a:00.0 eth2: Intel(R) PRO/1000 Network Connection
- [ 2.206749] e1000e 0000:0a:00.0 eth2: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
- [ 2.212174] e1000e 0000:0b:00.0: Disabling ASPM L0s L1
- [ 2.216019] pcieport 0000:08:00.0: using bridge 0000:00:19.0 INT D to get IRQ 17
- [ 2.222110] e1000e 0000:0b:00.0: PCI->APIC IRQ transform: INT D -> IRQ 17
- [ 2.227735] e1000e 0000:0b:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- [ 2.235875] e1000e 0000:0b:00.0: irq 54 for MSI/MSI-X
- [ 2.235887] e1000e 0000:0b:00.0: irq 55 for MSI/MSI-X
- [ 2.235898] e1000e 0000:0b:00.0: irq 56 for MSI/MSI-X
- [ 2.355415] e1000e 0000:0b:00.0 eth3: (PCI Express:2.5GT/s:Width x1) 00:00:24:ce:bb:1f
- [ 2.362052] e1000e 0000:0b:00.0 eth3: Intel(R) PRO/1000 Network Connection
- [ 2.367690] e1000e 0000:0b:00.0 eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
- [ 2.373232] PPP generic driver version 2.4.2
- [ 2.376986] PPP BSD Compression module registered
- [ 2.380392] PPP Deflate Compression module registered
- [ 2.380478] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.389004] NET: Registered protocol family 24
- [ 2.392654] ata2.00: ATA-8: WDC WD7500BPKT-00PK4T0, 01.01A01, max UDMA/133
- [ 2.392708] pcieport 0000:03:00.0: using bridge 0000:00:18.0 INT A to get IRQ 17
- [ 2.392713] ath9k 0000:07:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
- [ 2.409692] ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 2.415710] ata2.00: failed to get Identify Device Data, Emask 0x1
- [ 2.418601] ata2.00: failed to get Identify Device Data, Emask 0x1
- [ 2.418610] ata2.00: configured for UDMA/133
- [ 2.421848] scsi 1:0:0:0: Direct-Access ATA WDC WD7500BPKT-0 01.0 PQ: 0 ANSI: 5
- [ 2.431544] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
- [ 2.437787] sd 1:0:0:0: [sdb] 4096-byte physical blocks
- [ 2.442004] sd 1:0:0:0: [sdb] Write Protect is off
- [ 2.445484] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 2.445561] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.502513] ath: EEPROM regdomain: 0x0
- [ 2.502520] ath: EEPROM indicates default country code should be used
- [ 2.502522] ath: doing EEPROM country->regdmn map search
- [ 2.502527] ath: country maps to regdmn code: 0x3a
- [ 2.502531] ath: Country alpha2 being used: US
- [ 2.502533] ath: Regpair used: 0x3a
- [ 2.513262] sdb: sdb1
- [ 2.523055] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 2.525064] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
- [ 2.529599] cfg80211: Calling CRDA for country: US
- [ 2.534259] cfg80211: Regulatory domain changed to country: US
- [ 2.534307] Registered led device: ath9k-phy0
- [ 2.534319] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90000140000, irq=17
- [ 2.534962] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.535027] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
- [ 2.535032] ehci_hcd 0000:02:02.3: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 2.535130] ehci_hcd 0000:02:02.3: setting latency timer to 64
- [ 2.535139] ehci_hcd 0000:02:02.3: EHCI Host Controller
- [ 2.535155] ehci_hcd 0000:02:02.3: new USB bus registered, assigned bus number 1
- [ 2.560044] ehci_hcd 0000:02:02.3: cache line size of 32 is not supported
- [ 2.560064] ehci_hcd 0000:02:02.3: irq 19, io mem 0xa0000e00
- [ 2.575602] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 2.580053] ehci_hcd 0000:02:02.3: USB 2.0 started, EHCI 1.00
- [ 2.581935] hub 1-0:1.0: USB hub found
- [ 2.581952] hub 1-0:1.0: 3 ports detected
- [ 2.583193] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
- [ 2.583199] ehci_hcd 0000:02:08.3: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 2.583295] ehci_hcd 0000:02:08.3: setting latency timer to 64
- [ 2.583304] ehci_hcd 0000:02:08.3: EHCI Host Controller
- [ 2.583324] ehci_hcd 0000:02:08.3: new USB bus registered, assigned bus number 2
- [ 2.610040] ehci_hcd 0000:02:08.3: cache line size of 32 is not supported
- [ 2.610627] ehci_hcd 0000:02:08.3: irq 16, io mem 0xa0004b00
- [ 2.617664] cfg80211: (2402000 KHz - 2494000 KHz @ 40000 KHz), (N/A, 3500 mBm)
- [ 2.623746] cfg80211: (4910000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3500 mBm)
- [ 2.630029] ehci_hcd 0000:02:08.3: USB 2.0 started, EHCI 1.00
- [ 2.636056] hub 2-0:1.0: USB hub found
- [ 2.638507] hub 2-0:1.0: 3 ports detected
- [ 2.641833] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.646746] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
- [ 2.652414] ohci_hcd 0000:02:02.0: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 2.658095] ohci_hcd 0000:02:02.0: setting latency timer to 64
- [ 2.658102] ohci_hcd 0000:02:02.0: OHCI Host Controller
- [ 2.662070] ohci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 3
- [ 2.668416] ohci_hcd 0000:02:02.0: irq 19, io mem 0xa0000b00
- [ 2.735757] hub 3-0:1.0: USB hub found
- [ 2.738214] hub 3-0:1.0: 1 port detected
- [ 2.741931] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
- [ 2.747569] ohci_hcd 0000:02:02.1: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 2.753272] ohci_hcd 0000:02:02.1: setting latency timer to 64
- [ 2.753279] ohci_hcd 0000:02:02.1: OHCI Host Controller
- [ 2.757198] ohci_hcd 0000:02:02.1: new USB bus registered, assigned bus number 4
- [ 2.764197] ohci_hcd 0000:02:02.1: irq 19, io mem 0xa0000c00
- [ 2.825977] hub 4-0:1.0: USB hub found
- [ 2.828433] hub 4-0:1.0: 1 port detected
- [ 2.831722] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
- [ 2.837365] ohci_hcd 0000:02:02.2: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 2.843117] ohci_hcd 0000:02:02.2: setting latency timer to 64
- [ 2.843126] ohci_hcd 0000:02:02.2: OHCI Host Controller
- [ 2.847689] ohci_hcd 0000:02:02.2: new USB bus registered, assigned bus number 5
- [ 2.854515] ohci_hcd 0000:02:02.2: irq 19, io mem 0xa0000d00
- [ 2.900039] usb 1-1: new high-speed USB device number 2 using ehci_hcd
- [ 2.915933] hub 5-0:1.0: USB hub found
- [ 2.918384] hub 5-0:1.0: 1 port detected
- [ 2.922009] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
- [ 2.927647] ohci_hcd 0000:02:08.0: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 2.933373] ohci_hcd 0000:02:08.0: setting latency timer to 64
- [ 2.933380] ohci_hcd 0000:02:08.0: OHCI Host Controller
- [ 2.937782] ohci_hcd 0000:02:08.0: new USB bus registered, assigned bus number 6
- [ 2.944001] ohci_hcd 0000:02:08.0: irq 16, io mem 0xa0004800
- [ 3.006064] hub 6-0:1.0: USB hub found
- [ 3.008517] hub 6-0:1.0: 1 port detected
- [ 3.012287] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
- [ 3.017927] ohci_hcd 0000:02:08.1: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 3.023652] ohci_hcd 0000:02:08.1: setting latency timer to 64
- [ 3.023660] ohci_hcd 0000:02:08.1: OHCI Host Controller
- [ 3.027580] ohci_hcd 0000:02:08.1: new USB bus registered, assigned bus number 7
- [ 3.033789] ohci_hcd 0000:02:08.1: irq 16, io mem 0xa0004900
- [ 3.063134] hub 1-1:1.0: USB hub found
- [ 3.065878] hub 1-1:1.0: 4 ports detected
- [ 3.096283] hub 7-0:1.0: USB hub found
- [ 3.098741] hub 7-0:1.0: 1 port detected
- [ 3.102542] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
- [ 3.108182] ohci_hcd 0000:02:08.2: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 3.113909] ohci_hcd 0000:02:08.2: setting latency timer to 64
- [ 3.113917] ohci_hcd 0000:02:08.2: OHCI Host Controller
- [ 3.117836] ohci_hcd 0000:02:08.2: new USB bus registered, assigned bus number 8
- [ 3.124019] ohci_hcd 0000:02:08.2: irq 16, io mem 0xa0004a00
- [ 3.186274] hub 8-0:1.0: USB hub found
- [ 3.188724] hub 8-0:1.0: 1 port detected
- [ 3.191372] usb 2-3: new high-speed USB device number 2 using ehci_hcd
- [ 3.192780] Initializing USB Mass Storage driver...
- [ 3.193116] usbcore: registered new interface driver usb-storage
- [ 3.193117] USB Mass Storage support registered.
- [ 3.208157] coretemp coretemp.0: Unable to read TjMax from CPU 0
- [ 3.212892] coretemp coretemp.0: TjMax forced to 90 degrees C by user
- [ 3.218591] cpuidle: using governor ladder
- [ 3.222014] cpuidle: using governor menu
- [ 3.226673] usbcore: registered new interface driver usbhid
- [ 3.230949] usbhid: USB HID core driver
- [ 3.233550] Netfilter messages via NETLINK v0.30.
- [ 3.236937] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 3.242556] ctnetlink v0.93: registering with nfnetlink.
- [ 3.247034] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.251132] TCP: cubic registered
- [ 3.253153] NET: Registered protocol family 10
- [ 3.259417] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.264028] sit: IPv6 over IPv4 tunneling driver
- [ 3.270891] NET: Registered protocol family 17
- [ 3.274064] 8021q: 802.1Q VLAN Support v1.8
- [ 3.282595] registered taskstats version 1
- [ 3.300315] EXT4-fs (sda3): mounted filesystem with writeback data mode. Opts: (null)
- [ 3.306844] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
- [ 3.322813] devtmpfs: mounted
- [ 3.324941] Freeing unused kernel memory: 352k freed
- [ 3.356257] scsi2 : usb-storage 2-3:1.0
- [ 3.440251] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
- [ 3.553285] hub 1-1.1:1.0: USB hub found
- [ 3.556157] hub 1-1.1:1.0: 4 ports detected
- [ 3.840782] usb 1-1.1.1: new high-speed USB device number 4 using ehci_hcd
- [ 3.963085] hub 1-1.1.1:1.0: USB hub found
- [ 3.963527] hub 1-1.1.1:1.0: 4 ports detected
- [ 4.040277] usb 1-1.1.2: new full-speed USB device number 5 using ehci_hcd
- [ 4.089130] systemd-udevd[699]: starting version 197
- [ 4.235719] hid-generic 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS RS 550GI FW:857.L3 .I USB FW:L3 ] on usb-0000:02:02.3-1.1.2/input0
- [ 4.321903] usb 1-1.1.1.1: new high-speed USB device number 6 using ehci_hcd
- [ 4.362556] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Fit 1.22 PQ: 0 ANSI: 5
- [ 4.381970] sd 2:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
- [ 4.384433] sd 2:0:0:0: [sdc] Write Protect is off
- [ 4.384445] sd 2:0:0:0: [sdc] Mode Sense: 43 00 00 00
- [ 4.388349] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.405216] sdc: sdc1
- [ 4.415810] sd 2:0:0:0: [sdc] Attached SCSI removable disk
- [ 4.449989] hub 1-1.1.1.1:1.0: USB hub found
- [ 4.450602] hub 1-1.1.1.1:1.0: 4 ports detected
- [ 4.711835] systemd-udevd[707]: renamed network interface eth1 to enp6s0
- [ 4.751545] systemd-udevd[706]: renamed network interface eth0 to enp5s0
- [ 4.812511] systemd-udevd[710]: renamed network interface wlan0 to wlp7s0
- [ 4.861135] systemd-udevd[708]: renamed network interface eth2 to enp10s0
- [ 4.921037] systemd-udevd[709]: renamed network interface eth3 to enp11s0
- [ 6.474557] EXT4-fs (sda3): re-mounted. Opts: barrier=0
- [ 6.690824] Adding 2621436k swap on /dev/sda10. Priority:-1 extents:1 across:2621436k SS
- [ 6.756250] EXT4-fs (sda2): barriers disabled
- [ 6.756805] EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts: barrier=0
- [ 6.760126] EXT4-fs (sda4): barriers disabled
- [ 6.768488] EXT4-fs (sda4): mounted filesystem with writeback data mode. Opts: barrier=0
- [ 6.770913] EXT4-fs (sda5): barriers disabled
- [ 6.772542] EXT4-fs (sda5): mounted filesystem with writeback data mode. Opts: barrier=0
- [ 6.774856] EXT4-fs (sda6): barriers disabled
- [ 6.775565] EXT4-fs (sda6): mounted filesystem with writeback data mode. Opts: barrier=0
- [ 6.779443] EXT4-fs (sda7): barriers disabled
- [ 6.779923] EXT4-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended
- [ 6.780488] EXT4-fs (sda7): mounted filesystem with writeback data mode. Opts: barrier=0
- [ 6.790654] EXT4-fs (sda8): barriers disabled
- [ 6.793331] EXT4-fs (sda8): mounted filesystem with writeback data mode. Opts: barrier=0
- [ 6.798916] EXT4-fs (sda9): barriers disabled
- [ 6.799624] EXT4-fs (sda9): mounted filesystem with writeback data mode. Opts: barrier=0
- [ 6.814577] EXT4-fs (sdb1): barriers disabled
- [ 7.324103] EXT4-fs (sdb1): mounted filesystem with writeback data mode. Opts: barrier=0
- [ 10.382794] IPv6: ADDRCONF(NETDEV_UP): enp10s0: link is not ready
- [ 10.382800] 8021q: adding VLAN 0 to HW filter on device enp10s0
- [ 11.363668] IPv6: ADDRCONF(NETDEV_UP): enp11s0: link is not ready
- [ 11.363674] 8021q: adding VLAN 0 to HW filter on device enp11s0
- [ 11.897270] IPv6: ADDRCONF(NETDEV_UP): enp11s0.7: link is not ready
- [ 12.041174] e1000e: enp10s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
- [ 12.041190] e1000e 0000:0a:00.0 enp10s0: 10/100 speed: disabling TSO
- [ 12.041484] IPv6: ADDRCONF(NETDEV_CHANGE): enp10s0: link becomes ready
- [ 12.894569] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
- [ 12.894575] 8021q: adding VLAN 0 to HW filter on device enp5s0
- [ 13.062560] e1000e: enp11s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
- [ 13.062581] e1000e 0000:0b:00.0 enp11s0: 10/100 speed: disabling TSO
- [ 13.062862] IPv6: ADDRCONF(NETDEV_CHANGE): enp11s0: link becomes ready
- [ 13.065363] IPv6: ADDRCONF(NETDEV_CHANGE): enp11s0.7: link becomes ready
- [ 13.954575] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
- [ 13.954581] 8021q: adding VLAN 0 to HW filter on device enp6s0
- [ 15.591137] e1000e: enp6s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
- [ 15.591147] e1000e 0000:06:00.0 enp6s0: 10/100 speed: disabling TSO
- [ 15.591387] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
- [ 15.871251] e1000e: enp5s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
- [ 15.871498] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
- [ 15.970676] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
- [ 21.415238] microcode: CPU0 updated to revision 0x105, date = 2011-07-18
- [ 21.416631] microcode: CPU1 updated to revision 0x105, date = 2011-07-18
- [ 23.952162] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
- [ 23.952999] NFSD: starting 90-second grace period
- [ 33.433931] netlink: 12 bytes leftover after parsing attributes.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement