Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- MX6Q SABRELITE U-Boot > env default -a
- Unknown command 'env' - try 'help'
- MX6Q SABRELITE U-Boot > printenv
- bootdelay=3
- baudrate=115200
- ipaddr=192.168.1.103
- serverip=_SERVER_IP_ADDR_
- netmask=255.255.255.0
- loadaddr=0x10800000
- rd_loadaddr=0x11000000
- netdev=eth0
- ethprime=FEC0
- ethaddr=00:01:02:03:04:05
- uboot=u-boot.bin
- kernel=uImage
- bootargs=console=ttymxc1,115200
- bootargs_base=setenv bootargs console=ttymxc1,115200
- bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp video=mxcfb0:dev=ldb,LDB-XGA,if=RGB666 enable_wait_mode=off
- bootcmd_net=dhcp; run bootargs_base bootargs_nfs;bootm
- bootargs_mmc=setenv bootargs ${bootargs} root=/dev/mmcblk0p1 rootwait rw video=mxcfb0:dev=ldb,LDB-XGA,if=RGB666 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24
- bootcmd=run bootcmd_mmc
- clearenv=sf probe 1 && sf erase 0xc0000 0x2000 && echo restored environment to factory default
- upgradeu=for disk in 0 1 ; do mmc dev ${disk} ;for fs in fat ext2 ; do ${fs}load mmc ${disk}:1 10008000 /6q_upgrade && source 10008000 ; done ; done
- bootfile=_BOOT_FILE_PATH_IN_TFTP_
- bootsd0=mw.l 0x020d8040 0x3040 && mw.l 0x020d8044 0x10000000 && reset
- bootsd1=mw.l 0x020d8040 0x3840 && mw.l 0x020d8044 0x10000000 && reset
- nfsroot=_ROOTFS_PATH_IN_NFS_
- ethact=FEC0
- stdin=serial
- stdout=serial
- stderr=serial
- bootcmd_mmc=for disk in 0 1 ; do mmc dev ${disk} ;for fs in fat ext4 ; do ${fs}load mmc ${disk}:1 10008000 /6q_bootscript && source 10008000 ; done ; done
- Environment size: 1360/8188 bytes
- MX6Q SABRELITE U-Boot > boot
- mmc0 is current device
- reading /6q_bootscript
- ** Unable to read "/6q_bootscript" from mmc 0:1 **
- Unknown command 'ext4load' - try 'help'
- Card did not respond to voltage select!
- mmc1(part 0) is current device
- MMC: block number 0x1 exceeds max(0x0)
- ** Can't read from device 1 **
- ** Unable to use mmc 1:1 for fatload **
- Unknown command 'ext4load' - try 'help'
- MX6Q SABRELITE U-Boot > mmc dev mmc0
- mmc0 is current device
- MX6Q SABRELITE U-Boot > fatls mmc 0:1
- 5452 6x_bootscript
- 5452 6x_bootscript
- 1465 6x_upgrade
- 48848 imx6dl-nitrogen6_vm.dtb
- 50099 imx6dl-nitrogen6x.dtb
- 54171 imx6q-nitrogen6_max.dtb
- 51020 imx6q-nitrogen6x.dtb
- 49442 imx6q-sabrelite.dtb
- 6321024 uimage
- 500552 uramdisk.img
- 10 file(s), 0 dir(s)
- MX6Q SABRELITE U-Boot > mmcinfo
- Device: FSL_USDHC
- Manufacturer ID: 27
- OEM: 5048
- Name: SD04G
- Tran Speed: 25000000
- Rd Block Len: 512
- SD version 3.0
- High Capacity: Yes
- Capacity: 4001366016 Bytes
- Bus Width: 4-bit
- Boot Partition for boot: No boot partition available
- MX6Q SABRELITE U-Boot > mmc part
- Partition Map for UNKNOWN device 0 -- Partition Type: DOS
- Partition Start Sector Num Sectors Type
- 1 8192 40960 c
- 2 49152 40960 c
- 3 90112 2203648 f Extd
- 4 2293760 5070848 83
- 5 98304 1048576 83
- 6 1155072 1048576 83
- 7 2211840 32768 83
- 8 2252800 32768 83
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement