Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.0.0-15-generic (buildd@zirconium) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #26-Ubuntu SMP Fri Jan 20 15:59:53 UTC 2012 (Ubuntu 3.0.0-15.26-generic 3.0.13)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f5d0000 (usable)
- [ 0.000000] BIOS-e820: 000000007f5d0000 - 000000007f5e0000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000007f5e3000 - 0000000080000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
- [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
- [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
- [ 0.000000] DMI present.
- [ 0.000000] DMI: System76, Inc. Starling NetBook /Starling NetBook , BIOS 6.00 08/06/2010
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] last_pfn = 0x7f5d0 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-DFFFF uncachable
- [ 0.000000] E0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask 080000000 write-back
- [ 0.000000] 1 base 07F600000 mask 0FFE00000 uncachable
- [ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] original variable MTRRs
- [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
- [ 0.000000] reg 1, base: 2038MB, range: 2MB, type UC
- [ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC
- [ 0.000000] total RAM covered: 2038M
- [ 0.000000] Found optimal setting for mtrr clean up
- [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
- [ 0.000000] New variable MTRRs
- [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
- [ 0.000000] reg 1, base: 2038MB, range: 2MB, type UC
- [ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC
- [ 0.000000] found SMP MP-table at [c00f7f80] f7f80
- [ 0.000000] initial memory mapped : 0 - 01c00000
- [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037400000 page 2M
- [ 0.000000] 0037400000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
- [ 0.000000] RAMDISK: 35abe000 - 36d57000
- [ 0.000000] ACPI: RSDP 000f7f50 00024 (v02 PTLTD )
- [ 0.000000] ACPI: XSDT 7f5d87af 0006C (v01 PTLTD ? XSDT 06040000 LTP 00000000)
- [ 0.000000] ACPI: FACP 7f5dfdd6 000F4 (v03 INTEL 06040000 PTL 00000002)
- [ 0.000000] ACPI: DSDT 7f5d993d 06425 (v01 INTEL BEARG31A 06040000 MSFT 03000001)
- [ 0.000000] ACPI: FACS 7f5e2fc0 00040
- [ 0.000000] ACPI: TCPA 7f5dfeca 00032 (v01 Phoeni x 06040000 TL 00000000)
- [ 0.000000] ACPI: MCFG 7f5dfefc 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
- [ 0.000000] ACPI: HPET 7f5dff38 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
- [ 0.000000] ACPI: APIC 7f5dff70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
- [ 0.000000] ACPI: BOOT 7f5dffd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
- [ 0.000000] ACPI: SSDT 7f5d8d9d 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
- [ 0.000000] ACPI: SSDT 7f5d8cf7 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
- [ 0.000000] ACPI: SSDT 7f5d881b 004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 1149MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x0007f5d0
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009d
- [ 0.000000] 0: 0x00000100 -> 0x0007f5d0
- [ 0.000000] On node 0 totalpages: 521565
- [ 0.000000] free_area_init_node: node 0, pgdat c17b5400, node_mem_map f4ace200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3949 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 2300 pages used for memmap
- [ 0.000000] HighMem zone: 292054 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
- [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
- [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e8000
- [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @f7000000 s26240 r0 d22912 u2097152
- [ 0.000000] pcpu-alloc: s26240 r0 d22912 u2097152 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517489
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-15-generic root=UUID=ab87973c-2740-403b-84b4-a4c0aedde05c ro quiet splash vt.handoff=7
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 8346624 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f5d0)
- [ 0.000000] Memory: 2032244k/2086720k available (5336k kernel code, 54016k reserved, 2599k data, 696k init, 1177416k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc17c1000 - 0xc186f000 ( 696 kB)
- [ 0.000000] .data : 0xc1536144 - 0xc17c0080 (2599 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc1536144 (5336 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
- [ 0.000000] CPU 0 irqstacks, hard=f3c08000 soft=f3c0a000
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] vt handoff: transparent VT on vt#7
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1662.276 MHz processor.
- [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.55 BogoMIPS (lpj=6649104)
- [ 0.004017] pid_max: default: 32768 minimum: 301
- [ 0.004065] Security Framework initialized
- [ 0.004100] AppArmor: AppArmor initialized
- [ 0.004104] Yama: becoming mindful.
- [ 0.004221] Mount-cache hash table entries: 512
- [ 0.004481] Initializing cgroup subsys cpuacct
- [ 0.004495] Initializing cgroup subsys memory
- [ 0.004512] Initializing cgroup subsys devices
- [ 0.004518] Initializing cgroup subsys freezer
- [ 0.004524] Initializing cgroup subsys net_cls
- [ 0.004529] Initializing cgroup subsys blkio
- [ 0.004545] Initializing cgroup subsys perf_event
- [ 0.004601] CPU: Physical Processor ID: 0
- [ 0.004606] CPU: Processor Core ID: 0
- [ 0.004613] mce: CPU supports 5 MCE banks
- [ 0.004629] CPU0: Thermal monitoring enabled (TM1)
- [ 0.004637] using mwait in idle threads.
- [ 0.010815] ACPI: Core revision 20110413
- [ 0.020028] ftrace: allocating 24882 entries in 49 pages
- [ 0.024098] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.024594] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.067778] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a
- [ 0.068003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
- [ 0.068003] ... version: 3
- [ 0.068003] ... bit width: 40
- [ 0.068003] ... generic registers: 2
- [ 0.068003] ... value mask: 000000ffffffffff
- [ 0.068003] ... max period: 000000007fffffff
- [ 0.068003] ... fixed-purpose events: 3
- [ 0.068003] ... event mask: 0000000700000003
- [ 0.068003] CPU 1 irqstacks, hard=f3cca000 soft=f3ccc000
- [ 0.068003] Booting Node 0, Processors #1 Ok.
- [ 0.068003] smpboot cpu 1: start_ip = 99000
- [ 0.008000] Initializing CPU#1
- [ 0.156038] Brought up 2 CPUs
- [ 0.156047] Total of 2 processors activated (6649.56 BogoMIPS).
- [ 0.156563] devtmpfs: initialized
- [ 0.156563] PM: Registering ACPI NVS region at 7f5e0000 (12288 bytes)
- [ 0.162700] print_constraints: dummy:
- [ 0.162741] Time: 0:38:59 Date: 02/09/12
- [ 0.162832] NET: Registered protocol family 16
- [ 0.162932] Trying to unpack rootfs image as initramfs...
- [ 0.163234] EISA bus registered
- [ 0.163261] ACPI: bus type pci registered
- [ 0.163438] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
- [ 0.163450] PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
- [ 0.163456] PCI: Using MMCONFIG for extended config space
- [ 0.163463] PCI: Using configuration type 1 for base access
- [ 0.166697] bio: create slab <bio-0> at 0
- [ 0.170587] ACPI: EC: Look up EC in DSDT
- [ 0.233328] ACPI: SSDT 7f5d9666 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
- [ 0.234250] ACPI: Dynamic OEM Table Load:
- [ 0.234262] ACPI: SSDT (null) 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
- [ 0.234753] ACPI: SSDT 7f5d8ffc 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
- [ 0.235616] ACPI: Dynamic OEM Table Load:
- [ 0.235628] ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
- [ 0.236465] ACPI: SSDT 7f5d9869 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
- [ 0.237363] ACPI: Dynamic OEM Table Load:
- [ 0.237374] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
- [ 0.237700] ACPI: SSDT 7f5d95e1 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
- [ 0.238566] ACPI: Dynamic OEM Table Load:
- [ 0.238577] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
- [ 0.240850] ACPI: Interpreter enabled
- [ 0.240850] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.240850] ACPI: Using IOAPIC for interrupt routing
- [ 0.256902] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
- [ 0.257329] ACPI: No dock devices found.
- [ 0.257336] HEST: Table not found.
- [ 0.257350] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.259704] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110413/dsfield-143)
- [ 0.259728] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f3c255b8), AE_ALREADY_EXISTS (20110413/psparse-536)
- [ 0.259754] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
- [ 0.259777] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
- [ 0.264164] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
- [ 0.264177] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.264188] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
- [ 0.264197] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
- [ 0.264206] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
- [ 0.264215] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
- [ 0.264224] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
- [ 0.264234] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xf7ffffff]
- [ 0.264243] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xfdff]
- [ 0.264280] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
- [ 0.264355] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
- [ 0.264377] pci 0000:00:02.0: reg 10: [mem 0xf0300000-0xf037ffff]
- [ 0.264391] pci 0000:00:02.0: reg 14: [io 0x18e8-0x18ef]
- [ 0.264405] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
- [ 0.264419] pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
- [ 0.264478] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
- [ 0.264497] pci 0000:00:02.1: reg 10: [mem 0xf0380000-0xf03fffff]
- [ 0.264637] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
- [ 0.264673] pci 0000:00:1b.0: reg 10: [mem 0xf0400000-0xf0403fff 64bit]
- [ 0.264790] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.264803] pci 0000:00:1b.0: PME# disabled
- [ 0.264849] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
- [ 0.264965] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.264976] pci 0000:00:1c.0: PME# disabled
- [ 0.265027] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
- [ 0.265141] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 0.265152] pci 0000:00:1c.2: PME# disabled
- [ 0.265204] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
- [ 0.265281] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
- [ 0.265342] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
- [ 0.265422] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
- [ 0.265488] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
- [ 0.265564] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
- [ 0.265626] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
- [ 0.265702] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
- [ 0.265781] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
- [ 0.265822] pci 0000:00:1d.7: reg 10: [mem 0xf0604000-0xf06043ff]
- [ 0.265939] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.265950] pci 0000:00:1d.7: PME# disabled
- [ 0.265996] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
- [ 0.266111] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
- [ 0.266227] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
- [ 0.266294] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
- [ 0.266330] pci 0000:00:1f.2: reg 10: [io 0x18e0-0x18e7]
- [ 0.266351] pci 0000:00:1f.2: reg 14: [io 0x18d4-0x18d7]
- [ 0.266372] pci 0000:00:1f.2: reg 18: [io 0x18d8-0x18df]
- [ 0.266392] pci 0000:00:1f.2: reg 1c: [io 0x18d0-0x18d3]
- [ 0.266413] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf]
- [ 0.266434] pci 0000:00:1f.2: reg 24: [mem 0xf0604400-0xf06047ff]
- [ 0.266495] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.266507] pci 0000:00:1f.2: PME# disabled
- [ 0.266544] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
- [ 0.266623] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
- [ 0.266789] pci 0000:05:00.0: [10ec:8172] type 0 class 0x000280
- [ 0.266824] pci 0000:05:00.0: reg 10: [io 0x2000-0x20ff]
- [ 0.266850] pci 0000:05:00.0: reg 14: [mem 0xf0100000-0xf0103fff]
- [ 0.266995] pci 0000:05:00.0: supports D1 D2
- [ 0.267003] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot
- [ 0.267015] pci 0000:05:00.0: PME# disabled
- [ 0.272078] pci 0000:00:1c.0: PCI bridge to [bus 05-05]
- [ 0.272094] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
- [ 0.272108] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
- [ 0.272124] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.272247] pci 0000:09:00.0: [197b:2382] type 0 class 0x000880
- [ 0.272288] pci 0000:09:00.0: reg 10: [mem 0xf0204000-0xf02040ff]
- [ 0.272534] pci 0000:09:00.2: [197b:2381] type 0 class 0x000805
- [ 0.272573] pci 0000:09:00.2: reg 10: [mem 0xf0204400-0xf02044ff]
- [ 0.272802] pci 0000:09:00.3: [197b:2383] type 0 class 0x000880
- [ 0.272840] pci 0000:09:00.3: reg 10: [mem 0xf0204800-0xf02048ff]
- [ 0.273070] pci 0000:09:00.5: [197b:0260] type 0 class 0x000200
- [ 0.273107] pci 0000:09:00.5: reg 10: [mem 0xf0200000-0xf0203fff]
- [ 0.273153] pci 0000:09:00.5: reg 18: [io 0x3400-0x347f]
- [ 0.273180] pci 0000:09:00.5: reg 1c: [io 0x3000-0x30ff]
- [ 0.273302] pci 0000:09:00.5: PME# supported from D0 D3hot D3cold
- [ 0.273316] pci 0000:09:00.5: PME# disabled
- [ 0.280089] pci 0000:00:1c.2: PCI bridge to [bus 09-09]
- [ 0.280106] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
- [ 0.280119] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf02fffff]
- [ 0.280135] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.280262] pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
- [ 0.280277] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
- [ 0.280291] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- [ 0.280309] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.280321] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.280330] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.280340] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
- [ 0.280350] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
- [ 0.280359] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
- [ 0.280369] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
- [ 0.280379] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
- [ 0.280389] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xf7ffffff] (subtractive decode)
- [ 0.280398] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
- [ 0.280434] pci_bus 0000:00: on NUMA node 0
- [ 0.280450] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.280725] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
- [ 0.280879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
- [ 0.281049] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
- [ 0.281493] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110413/dsfield-143)
- [ 0.281515] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f3c255b8), AE_ALREADY_EXISTS (20110413/psparse-536)
- [ 0.281553] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.281747] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110413/dsfield-143)
- [ 0.281767] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f3c255b8), AE_ALREADY_EXISTS (20110413/psparse-536)
- [ 0.281802] pci0000:00: ACPI _OSC request failed (AE_ALREADY_EXISTS), returned control mask: 0x1d
- [ 0.281809] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 0.293343] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.293520] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 0.293691] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
- [ 0.293872] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.294051] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 0.294233] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 0.294436] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 0.294623] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.294946] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.294981] vgaarb: loaded
- [ 0.294986] vgaarb: bridge control possible 0000:00:02.0
- [ 0.295674] SCSI subsystem initialized
- [ 0.295840] libata version 3.00 loaded.
- [ 0.295987] usbcore: registered new interface driver usbfs
- [ 0.296057] usbcore: registered new interface driver hub
- [ 0.296161] usbcore: registered new device driver usb
- [ 0.296463] PCI: Using ACPI for IRQ routing
- [ 0.297179] PCI: pci_cache_line_size set to 64 bytes
- [ 0.297352] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
- [ 0.297361] reserve RAM buffer: 000000007f5d0000 - 000000007fffffff
- [ 0.297665] NetLabel: Initializing
- [ 0.297673] NetLabel: domain hash size = 128
- [ 0.297678] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.297714] NetLabel: unlabeled traffic allowed by default
- [ 0.297863] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.297878] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.297893] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- [ 0.301130] Switching to clocksource hpet
- [ 0.301958] Switched to NOHz mode on CPU #0
- [ 0.302082] Switched to NOHz mode on CPU #1
- [ 0.320801] AppArmor: AppArmor Filesystem Enabled
- [ 0.320867] pnp: PnP ACPI init
- [ 0.320916] ACPI: bus type pnp registered
- [ 0.323892] pnp 00:00: [bus 00-3f]
- [ 0.323903] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.323912] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.323920] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.323929] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
- [ 0.323937] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
- [ 0.323945] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
- [ 0.323954] pnp 00:00: [mem 0x000cc000-0x000cffff window]
- [ 0.323962] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
- [ 0.323970] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
- [ 0.323979] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
- [ 0.323987] pnp 00:00: [mem 0x000dc000-0x000dffff window]
- [ 0.323995] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
- [ 0.324033] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
- [ 0.324042] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
- [ 0.324050] pnp 00:00: [mem 0x000ec000-0x000effff window]
- [ 0.324058] pnp 00:00: [mem 0x000f0000-0x000fffff window]
- [ 0.324067] pnp 00:00: [mem 0x80000000-0xf7ffffff window]
- [ 0.324075] pnp 00:00: [io 0x0d00-0xfdff window]
- [ 0.324083] pnp 00:00: [mem 0x00000000 window]
- [ 0.324091] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
- [ 0.324257] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 0.324626] pnp 00:01: [io 0x0010-0x001f]
- [ 0.324636] pnp 00:01: [io 0x0024-0x0025]
- [ 0.324645] pnp 00:01: [io 0x0028-0x0029]
- [ 0.324653] pnp 00:01: [io 0x002c-0x002d]
- [ 0.324661] pnp 00:01: [io 0x0030-0x0031]
- [ 0.324669] pnp 00:01: [io 0x0034-0x0035]
- [ 0.324677] pnp 00:01: [io 0x0038-0x0039]
- [ 0.324684] pnp 00:01: [io 0x003c-0x003d]
- [ 0.324692] pnp 00:01: [io 0x0072-0x0077]
- [ 0.324699] pnp 00:01: [io 0x0080]
- [ 0.324705] pnp 00:01: [io 0x0090-0x009f]
- [ 0.324713] pnp 00:01: [io 0x00a4-0x00a5]
- [ 0.324720] pnp 00:01: [io 0x00a8-0x00a9]
- [ 0.324727] pnp 00:01: [io 0x00ac-0x00ad]
- [ 0.324734] pnp 00:01: [io 0x00b0-0x00b5]
- [ 0.324741] pnp 00:01: [io 0x00b8-0x00b9]
- [ 0.324748] pnp 00:01: [io 0x00bc-0x00bd]
- [ 0.324756] pnp 00:01: [io 0x0800-0x080f]
- [ 0.324763] pnp 00:01: [io 0x1000-0x107f]
- [ 0.324770] pnp 00:01: [io 0x1180-0x11bf]
- [ 0.324777] pnp 00:01: [io 0x002e-0x002f]
- [ 0.324785] pnp 00:01: [io 0x04d0-0x04d1]
- [ 0.324792] pnp 00:01: [io 0xfe00]
- [ 0.324799] pnp 00:01: [mem 0xe0000000-0xefffffff]
- [ 0.324807] pnp 00:01: [mem 0xfed14000-0xfed17fff]
- [ 0.324815] pnp 00:01: [mem 0xf8000000-0xfbffffff]
- [ 0.324823] pnp 00:01: [mem 0xfef00000-0xfeffffff]
- [ 0.325043] system 00:01: [io 0x0800-0x080f] has been reserved
- [ 0.325054] system 00:01: [io 0x1000-0x107f] has been reserved
- [ 0.325063] system 00:01: [io 0x1180-0x11bf] has been reserved
- [ 0.325073] system 00:01: [io 0x04d0-0x04d1] has been reserved
- [ 0.325082] system 00:01: [io 0xfe00] has been reserved
- [ 0.325093] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.325103] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
- [ 0.325113] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
- [ 0.325123] system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
- [ 0.325135] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.325186] pnp 00:02: [io 0x0000-0x000f]
- [ 0.325194] pnp 00:02: [io 0x0081-0x008f]
- [ 0.325201] pnp 00:02: [io 0x00c0-0x00df]
- [ 0.325209] pnp 00:02: [dma 4]
- [ 0.325310] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.325345] pnp 00:03: [io 0x00f0-0x00fe]
- [ 0.325369] pnp 00:03: [irq 13]
- [ 0.325464] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.325588] pnp 00:04: [io 0x0070-0x0071]
- [ 0.325607] pnp 00:04: [irq 8]
- [ 0.325722] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.325759] pnp 00:05: [io 0x0061]
- [ 0.325878] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.325968] pnp 00:06: [io 0x0060]
- [ 0.325976] pnp 00:06: [io 0x0064]
- [ 0.325993] pnp 00:06: [irq 1]
- [ 0.326100] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.326237] pnp 00:07: [irq 12]
- [ 0.326352] pnp 00:07: Plug and Play ACPI device, IDs STLc033 PNP0f13 (active)
- [ 0.326847] pnp: PnP ACPI: found 8 devices
- [ 0.326855] ACPI: ACPI bus type pnp unregistered
- [ 0.326865] PnPBIOS: Disabled by ACPI PNP
- [ 0.366921] PCI: max bus depth: 1 pci_try_num: 2
- [ 0.366993] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
- [ 0.367009] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
- [ 0.367020] pci 0000:00:1c.0: PCI bridge to [bus 05-05]
- [ 0.367030] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
- [ 0.367044] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
- [ 0.367057] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
- [ 0.367074] pci 0000:00:1c.2: PCI bridge to [bus 09-09]
- [ 0.367084] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
- [ 0.367097] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf02fffff]
- [ 0.367110] pci 0000:00:1c.2: bridge window [mem 0x80000000-0x801fffff 64bit pref]
- [ 0.367126] pci 0000:00:1e.0: PCI bridge to [bus 11-11]
- [ 0.367133] pci 0000:00:1e.0: bridge window [io disabled]
- [ 0.367145] pci 0000:00:1e.0: bridge window [mem disabled]
- [ 0.367155] pci 0000:00:1e.0: bridge window [mem pref disabled]
- [ 0.367181] pci 0000:00:1c.0: enabling device (0000 -> 0003)
- [ 0.367220] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.367235] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.367266] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.367278] pci 0000:00:1c.2: setting latency timer to 64
- [ 0.367296] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.367308] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.367317] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
- [ 0.367326] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
- [ 0.367334] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
- [ 0.367343] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
- [ 0.367352] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
- [ 0.367361] pci_bus 0000:00: resource 10 [mem 0x000e4000-0x000e7fff]
- [ 0.367370] pci_bus 0000:00: resource 11 [mem 0x80000000-0xf7ffffff]
- [ 0.367379] pci_bus 0000:00: resource 12 [io 0x0d00-0xfdff]
- [ 0.367388] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
- [ 0.367396] pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff]
- [ 0.367406] pci_bus 0000:05: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
- [ 0.367415] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
- [ 0.367424] pci_bus 0000:09: resource 1 [mem 0xf0200000-0xf02fffff]
- [ 0.367433] pci_bus 0000:09: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
- [ 0.367443] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
- [ 0.367451] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
- [ 0.367460] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
- [ 0.367469] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
- [ 0.367477] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
- [ 0.367487] pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
- [ 0.367496] pci_bus 0000:11: resource 10 [mem 0x000e4000-0x000e7fff]
- [ 0.367505] pci_bus 0000:11: resource 11 [mem 0x80000000-0xf7ffffff]
- [ 0.367514] pci_bus 0000:11: resource 12 [io 0x0d00-0xfdff]
- [ 0.367625] NET: Registered protocol family 2
- [ 0.367813] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.368504] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.369596] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.370133] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.370144] TCP reno registered
- [ 0.370159] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.370182] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.370489] NET: Registered protocol family 1
- [ 0.370536] pci 0000:00:02.0: Boot video device
- [ 0.370730] PCI: CLS 32 bytes, default 64
- [ 0.370743] Simple Boot Flag at 0x36 set to 0x1
- [ 0.371644] audit: initializing netlink socket (disabled)
- [ 0.371669] type=2000 audit(1328747939.364:1): initialized
- [ 0.431551] highmem bounce pool size: 64 pages
- [ 0.431569] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.447521] VFS: Disk quotas dquot_6.5.2
- [ 0.447725] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.450117] fuse init (API version 7.16)
- [ 0.450445] msgmni has been set to 1669
- [ 0.451638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.451761] io scheduler noop registered
- [ 0.451769] io scheduler deadline registered
- [ 0.451831] io scheduler cfq registered (default)
- [ 0.452185] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 0.452278] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
- [ 0.452424] pcieport 0000:00:1c.2: setting latency timer to 64
- [ 0.452506] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
- [ 0.452715] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.452800] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.452979] intel_idle: MWAIT substates: 0x20220
- [ 0.452996] intel_idle: v0.4 model 0x1C
- [ 0.453001] intel_idle: lapic_timer_reliable_states 0x2
- [ 0.453020] Marking TSC unstable due to TSC halts in idle states deeper than C2
- [ 0.652858] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 0.853087] ACPI: AC Adapter [ADP0] (off-line)
- [ 0.853498] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 0.853516] ACPI: Power Button [PWRB]
- [ 0.853663] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
- [ 0.855350] ACPI: Lid Switch [LID0]
- [ 0.855507] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
- [ 0.855523] ACPI: Sleep Button [SLPB]
- [ 0.855705] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 0.855718] ACPI: Power Button [PWRF]
- [ 0.855796] ACPI: acpi_idle yielding to intel_idle
- [ 0.878040] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.878050] ACPI: Thermal Zone [TZ0] (57 C)
- [ 0.878132] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 0.878291] ERST: Table is not found!
- [ 0.878484] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 0.888702] ACPI: Battery Slot [BAT0] (battery present)
- [ 0.888756] isapnp: Scanning for PnP cards...
- [ 1.139527] Freeing initrd memory: 19044k freed
- [ 1.244102] isapnp: No Plug & Play device found
- [ 1.251365] Linux agpgart interface v0.103
- [ 1.251533] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
- [ 1.251730] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
- [ 1.251981] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
- [ 1.252223] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
- [ 1.255074] brd: module loaded
- [ 1.256517] loop: module loaded
- [ 1.257574] Fixed MDIO Bus: probed
- [ 1.257640] PPP generic driver version 2.4.2
- [ 1.257749] tun: Universal TUN/TAP device driver, 1.6
- [ 1.257754] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.257940] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.258004] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 1.258038] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 1.258046] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 1.258134] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- [ 1.258174] ehci_hcd 0000:00:1d.7: using broken periodic workaround
- [ 1.258192] ehci_hcd 0000:00:1d.7: debug port 1
- [ 1.262085] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 1.262126] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0604000
- [ 1.276035] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 1.276320] hub 1-0:1.0: USB hub found
- [ 1.276332] hub 1-0:1.0: 8 ports detected
- [ 1.276492] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.276523] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.276594] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 1.276609] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 1.276616] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 1.276719] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 1.276762] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
- [ 1.277038] hub 2-0:1.0: USB hub found
- [ 1.277049] hub 2-0:1.0: 2 ports detected
- [ 1.277197] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.277211] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 1.277219] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 1.277311] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- [ 1.277368] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
- [ 1.277644] hub 3-0:1.0: USB hub found
- [ 1.277655] hub 3-0:1.0: 2 ports detected
- [ 1.277777] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 1.277790] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 1.277798] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 1.277891] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- [ 1.277947] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
- [ 1.278220] hub 4-0:1.0: USB hub found
- [ 1.278231] hub 4-0:1.0: 2 ports detected
- [ 1.278358] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
- [ 1.278376] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 1.278383] uhci_hcd 0000:00:1d.3: UHCI Host Controller
- [ 1.278468] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
- [ 1.278522] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
- [ 1.278797] hub 5-0:1.0: USB hub found
- [ 1.278808] hub 5-0:1.0: 2 ports detected
- [ 1.279036] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:SENM] at 0x60,0x64 irq 1,12
- [ 1.284522] i8042: Detected active multiplexing controller, rev 1.1
- [ 1.290395] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.290416] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 1.290489] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 1.290557] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 1.290618] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 1.290895] mousedev: PS/2 mouse device common for all mice
- [ 1.291474] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- [ 1.291518] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 1.291796] device-mapper: uevent: version 1.0.3
- [ 1.291987] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- [ 1.292093] EISA: Probing bus 0 at eisa.0
- [ 1.292098] EISA: Cannot allocate resource for mainboard
- [ 1.292104] Cannot allocate resource for EISA slot 1
- [ 1.292108] Cannot allocate resource for EISA slot 2
- [ 1.292113] Cannot allocate resource for EISA slot 3
- [ 1.292118] Cannot allocate resource for EISA slot 4
- [ 1.292122] Cannot allocate resource for EISA slot 5
- [ 1.292127] Cannot allocate resource for EISA slot 6
- [ 1.292131] Cannot allocate resource for EISA slot 7
- [ 1.292136] Cannot allocate resource for EISA slot 8
- [ 1.292140] EISA: Detected 0 cards.
- [ 1.292157] cpufreq-nforce2: No nForce2 chipset.
- [ 1.292312] cpuidle: using governor ladder
- [ 1.292514] cpuidle: using governor menu
- [ 1.292519] EFI Variables Facility v0.08 2004-May-17
- [ 1.293194] TCP cubic registered
- [ 1.293565] NET: Registered protocol family 10
- [ 1.294944] NET: Registered protocol family 17
- [ 1.294994] Registering the dns_resolver key type
- [ 1.295038] Using IPI No-Shortcut mode
- [ 1.295349] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 1.295730] PM: Hibernation image not present or could not be loaded.
- [ 1.295756] registered taskstats version 1
- [ 1.316235] Magic number: 0:228:607
- [ 1.316379] rtc_cmos 00:04: setting system clock to 2012-02-09 00:39:00 UTC (1328747940)
- [ 1.317304] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 1.317311] EDD information not available.
- [ 1.317621] Freeing unused kernel memory: 696k freed
- [ 1.318059] Write protecting the kernel text: 5340k
- [ 1.318172] Write protecting the kernel read-only data: 2192k
- [ 1.371204] udevd[84]: starting version 173
- [ 1.855369] sdhci: Secure Digital Host Controller Interface driver
- [ 1.855381] sdhci: Copyright(c) Pierre Ossman
- [ 1.873808] jme: JMicron JMC2XX ethernet driver version 1.0.8
- [ 1.873897] jme 0000:09:00.5: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 1.873929] jme 0000:09:00.5: setting latency timer to 64
- [ 1.889991] jme 0000:09:00.5: eth0: JMC260 Fast Ethernet chiprev:22 pcirev:2 macaddr:00:90:f5:a6:6b:a4
- [ 1.890083] sdhci-pci 0000:09:00.0: SDHCI controller found [197b:2382] (rev 80)
- [ 1.890118] sdhci-pci 0000:09:00.0: enabling device (0104 -> 0106)
- [ 1.890140] sdhci-pci 0000:09:00.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.890233] sdhci-pci 0000:09:00.0: setting latency timer to 64
- [ 1.890268] mmc0: no vmmc regulator found
- [ 1.890371] Registered led device: mmc0::
- [ 1.890503] mmc0: SDHCI controller on PCI [0000:09:00.0] using ADMA
- [ 1.890541] sdhci-pci 0000:09:00.2: SDHCI controller found [197b:2381] (rev 80)
- [ 1.890569] sdhci-pci 0000:09:00.2: enabling device (0104 -> 0106)
- [ 1.890591] sdhci-pci 0000:09:00.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.890615] sdhci-pci 0000:09:00.2: Refusing to bind to secondary interface.
- [ 1.890634] sdhci-pci 0000:09:00.2: PCI INT B disabled
- [ 1.911052] ahci 0000:00:1f.2: version 3.0
- [ 1.911089] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.911201] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
- [ 1.911287] ahci: SSS flag set, parallel bus scan disabled
- [ 1.911352] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
- [ 1.911368] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
- [ 1.911383] ahci 0000:00:1f.2: setting latency timer to 64
- [ 1.925717] [drm] Initialized drm 1.1.0 20060810
- [ 1.928341] scsi0 : ahci
- [ 1.933079] scsi1 : ahci
- [ 1.936191] scsi2 : ahci
- [ 1.966657] scsi3 : ahci
- [ 1.967205] ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500 irq 42
- [ 1.967219] ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580 irq 42
- [ 1.967229] ata3: DUMMY
- [ 1.967235] ata4: DUMMY
- [ 1.969098] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.969116] i915 0000:00:02.0: setting latency timer to 64
- [ 2.038595] i915 0000:00:02.0: irq 43 for MSI/MSI-X
- [ 2.038615] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 2.038625] [drm] Driver supports precise vblank timestamp query.
- [ 2.065459] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 2.123664] fixme: max PWM is zero.
- [ 2.248797] wmi: Mapper loaded
- [ 2.288116] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.289218] ata1.00: ATA-8: Hitachi HTS545050B9A300, PB4OC64G, max UDMA/133
- [ 2.289237] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 2.290527] ata1.00: configured for UDMA/133
- [ 2.290852] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 PB4O PQ: 0 ANSI: 5
- [ 2.291235] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 2.291325] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 2.291521] sd 0:0:0:0: [sda] Write Protect is off
- [ 2.291541] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.291677] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.352463] sda: sda1 sda2 < sda5 >
- [ 2.353547] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 2.468158] [drm] initialized overlay support
- [ 2.525225] fbcon: inteldrmfb (fb0) is primary device
- [ 2.525392] Console: switching to colour frame buffer device 128x37
- [ 2.525488] fb0: inteldrmfb frame buffer device
- [ 2.525495] drm: registered panic notifier
- [ 2.547319] acpi device:02: registered as cooling_device2
- [ 2.547587] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
- [ 2.547789] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 2.548364] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 2.612150] ata2: SATA link down (SStatus 0 SControl 300)
- [ 3.563664] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 13.646464] udevd[333]: starting version 173
- [ 13.785073] lp: driver loaded but no devices found
- [ 13.800182] Adding 6008828k swap on /dev/sda5. Priority:-1 extents:1 across:6008828k
- [ 14.210383] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
- [ 14.714205] type=1400 audit(1328747953.892:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=523 comm="apparmor_parser"
- [ 14.733813] type=1400 audit(1328747953.912:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=523 comm="apparmor_parser"
- [ 14.734990] type=1400 audit(1328747953.912:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=523 comm="apparmor_parser"
- [ 15.140238] jmb38x_ms 0000:09:00.3: enabling device (0104 -> 0106)
- [ 15.140265] jmb38x_ms 0000:09:00.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 15.140285] jmb38x_ms 0000:09:00.3: setting latency timer to 64
- [ 15.282243] cfg80211: Calling CRDA to update world regulatory domain
- [ 16.173290] psmouse serio2: ID: 10 00 64
- [ 16.730275] rtl8192se 0000:05:00.0: enabling device (0104 -> 0107)
- [ 16.730301] rtl8192se 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 16.730322] rtl8192se 0000:05:00.0: setting latency timer to 64
- [ 16.760274] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
- [ 16.760283] Loading firmware rtlwifi/rtl8192sefw.bin
- [ 16.993100] init: failsafe main process (670) killed by TERM signal
- [ 17.331885] type=1400 audit(1328747956.508:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=738 comm="apparmor_parser"
- [ 17.354671] jme 0000:09:00.5: irq 44 for MSI/MSI-X
- [ 17.355215] jme 0000:09:00.5: eth0: Link is down
- [ 17.415695] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 17.417140] type=1400 audit(1328747956.596:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=737 comm="apparmor_parser"
- [ 17.437834] type=1400 audit(1328747956.616:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=742 comm="apparmor_parser"
- [ 17.439603] type=1400 audit(1328747956.616:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=742 comm="apparmor_parser"
- [ 17.440811] type=1400 audit(1328747956.620:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=742 comm="apparmor_parser"
- [ 17.459088] type=1400 audit(1328747956.636:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=747 comm="apparmor_parser"
- [ 17.463640] type=1400 audit(1328747956.640:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=747 comm="apparmor_parser"
- [ 17.621038] HDA Intel 0000:00:1b.0: enabling device (0104 -> 0106)
- [ 17.621082] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 17.621198] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
- [ 17.621265] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 17.888891] cfg80211: World regulatory domain updated:
- [ 17.888905] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 17.888920] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 17.888932] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 17.888944] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 17.888957] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 17.888969] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 17.904316] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.904332] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 17.904343] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.904355] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 17.904365] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.904377] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 17.904387] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.904400] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 17.904409] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.904422] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 17.904432] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.904445] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 17.904456] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.904469] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 17.904479] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.904491] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 17.904501] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.904523] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 17.904534] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.904546] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 17.904557] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.904569] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 17.904580] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.904591] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 17.904601] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.904612] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 17.904621] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
- [ 17.907054] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 17.917815] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
- [ 18.176902] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 18.524140] init: apport pre-start process (855) terminated with status 1
- [ 18.685053] init: apport post-stop process (902) terminated with status 1
- [ 18.796065] Finger Sensing Pad, hw: 13.2.1, sw: 1.0.0-K, buttons: 4
- [ 18.798202] init: gdm main process (893) killed by TERM signal
- [ 18.821230] ppdev: user-space parallel port driver
- [ 19.157788] Bluetooth: Core ver 2.16
- [ 19.169860] NET: Registered protocol family 31
- [ 19.169869] Bluetooth: HCI device and connection manager initialized
- [ 19.169880] Bluetooth: HCI socket layer initialized
- [ 19.169887] Bluetooth: L2CAP socket layer initialized
- [ 19.173180] Bluetooth: SCO socket layer initialized
- [ 19.183115] Bluetooth: RFCOMM TTY layer initialized
- [ 19.183137] Bluetooth: RFCOMM socket layer initialized
- [ 19.183146] Bluetooth: RFCOMM ver 1.11
- [ 19.960203] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 19.960214] Bluetooth: BNEP filters: protocol multicast
- [ 23.641032] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio2/input/input6
- [ 23.795473] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
- [ 24.322783] init: plymouth-stop pre-start process (1275) terminated with status 1
- [ 28.577308] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
- [ 49.026816] wlan0: authenticate with 00:24:6c:84:40:50 (try 1)
- [ 49.028314] wlan0: authenticated
- [ 49.029497] wlan0: associate with 00:24:6c:84:40:50 (try 1)
- [ 49.037737] wlan0: RX AssocResp from 00:24:6c:84:40:50 (capab=0x421 status=0 aid=1)
- [ 49.037751] wlan0: associated
- [ 49.039718] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 59.616032] wlan0: no IPv6 routers present
- [ 216.828167] wlan0: deauthenticating from 00:24:6c:84:40:50 by local choice (reason=3)
- [ 216.844250] cfg80211: All devices are disconnected, going to restore regulatory settings
- [ 216.844267] cfg80211: Restoring regulatory settings
- [ 216.844328] cfg80211: Calling CRDA to update world regulatory domain
- [ 216.865745] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 216.865761] cfg80211: World regulatory domain updated:
- [ 216.865770] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 216.865783] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 216.865795] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 216.865807] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 216.865819] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 216.865832] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 228.831511] wlan0: direct probe to 00:24:6c:ae:97:e1 (try 1/3)
- [ 229.028140] wlan0: direct probe to 00:24:6c:ae:97:e1 (try 2/3)
- [ 229.228151] wlan0: direct probe to 00:24:6c:ae:97:e1 (try 3/3)
- [ 229.428118] wlan0: direct probe to 00:24:6c:ae:97:e1 timed out
- [ 235.445446] wlan0: authenticate with 00:24:6c:84:cc:61 (try 1)
- [ 235.453451] wlan0: authenticated
- [ 235.454301] wlan0: associate with 00:24:6c:84:cc:61 (try 1)
- [ 235.652079] wlan0: associate with 00:24:6c:84:cc:61 (try 2)
- [ 235.852215] wlan0: associate with 00:24:6c:84:cc:61 (try 3)
- [ 236.052185] wlan0: association with 00:24:6c:84:cc:61 timed out
- [ 242.078066] wlan0: direct probe to 00:24:6c:84:e1:31 (try 1/3)
- [ 242.276089] wlan0: direct probe to 00:24:6c:84:e1:31 (try 2/3)
- [ 242.476185] wlan0: direct probe to 00:24:6c:84:e1:31 (try 3/3)
- [ 242.676170] wlan0: direct probe to 00:24:6c:84:e1:31 timed out
- [ 248.861847] wlan0: authenticate with 00:24:6c:84:cd:c1 (try 1)
- [ 248.867183] wlan0: authenticated
- [ 248.896056] wlan0: associate with 00:24:6c:84:cd:c1 (try 1)
- [ 248.898561] wlan0: RX AssocResp from 00:24:6c:84:cd:c1 (capab=0x21 status=17 aid=0)
- [ 248.898577] wlan0: 00:24:6c:84:cd:c1 denied association (code=17)
- [ 248.913198] wlan0: deauthenticating from 00:24:6c:84:cd:c1 by local choice (reason=3)
- [ 250.020558] wlan0: authenticate with 00:24:6c:84:e1:c1 (try 1)
- [ 250.023981] wlan0: authenticated
- [ 250.028711] wlan0: associate with 00:24:6c:84:e1:c1 (try 1)
- [ 250.043035] wlan0: RX AssocResp from 00:24:6c:84:e1:c1 (capab=0x431 status=0 aid=1)
- [ 250.043049] wlan0: associated
- [ 288.010933] wlan0: deauthenticating from 00:24:6c:84:e1:c1 by local choice (reason=3)
- [ 288.028667] cfg80211: All devices are disconnected, going to restore regulatory settings
- [ 288.028684] cfg80211: Restoring regulatory settings
- [ 288.029517] cfg80211: Calling CRDA to update world regulatory domain
- [ 288.048890] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 288.048906] cfg80211: World regulatory domain updated:
- [ 288.048914] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 288.048928] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 288.048940] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 288.048952] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 288.048963] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 288.048975] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 320.100194] wlan0: authenticate with 00:24:6c:84:36:c0 (try 1)
- [ 320.101679] wlan0: authenticated
- [ 320.102415] wlan0: associate with 00:24:6c:84:36:c0 (try 1)
- [ 320.107526] wlan0: RX AssocResp from 00:24:6c:84:36:c0 (capab=0x421 status=0 aid=1)
- [ 320.107540] wlan0: associated
- [ 451.556077] wlan0: direct probe to 00:24:6c:84:cc:60 (try 1/3)
- [ 451.756073] wlan0: direct probe to 00:24:6c:84:cc:60 (try 2/3)
- [ 451.960063] wlan0: direct probe to 00:24:6c:84:cc:60 (try 3/3)
- [ 452.160419] wlan0: direct probe to 00:24:6c:84:cc:60 timed out
- [ 460.066958] wlan0: deauthenticating from 00:24:6c:84:36:c0 by local choice (reason=2)
- [ 460.091283] cfg80211: All devices are disconnected, going to restore regulatory settings
- [ 460.091302] cfg80211: Restoring regulatory settings
- [ 460.092663] cfg80211: Calling CRDA to update world regulatory domain
- [ 460.115655] wlan0: direct probe to 00:24:6c:84:8d:90 (try 1/3)
- [ 460.121875] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 460.121891] cfg80211: World regulatory domain updated:
- [ 460.121900] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 460.121913] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 460.121925] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 460.121937] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 460.121950] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 460.121962] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 460.312084] wlan0: direct probe to 00:24:6c:84:8d:90 (try 2/3)
- [ 460.512085] wlan0: direct probe to 00:24:6c:84:8d:90 (try 3/3)
- [ 460.712118] wlan0: direct probe to 00:24:6c:84:8d:90 timed out
- [ 466.900069] wlan0: direct probe to 00:24:6c:84:7f:20 (try 1/3)
- [ 467.100130] wlan0: direct probe to 00:24:6c:84:7f:20 (try 2/3)
- [ 467.300212] wlan0: direct probe to 00:24:6c:84:7f:20 (try 3/3)
- [ 467.500104] wlan0: direct probe to 00:24:6c:84:7f:20 timed out
- [ 473.557555] wlan0: direct probe to 00:24:6c:84:8d:90 (try 1/3)
- [ 473.759518] wlan0: direct probe to 00:24:6c:84:8d:90 (try 2/3)
- [ 473.956083] wlan0: direct probe to 00:24:6c:84:8d:90 (try 3/3)
- [ 474.156120] wlan0: direct probe to 00:24:6c:84:8d:90 timed out
- [ 480.328080] wlan0: authenticate with 00:24:6c:84:36:c0 (try 1)
- [ 480.329680] wlan0: authenticated
- [ 480.330161] wlan0: associate with 00:24:6c:84:36:c0 (try 1)
- [ 480.333331] wlan0: RX ReassocResp from 00:24:6c:84:36:c0 (capab=0x421 status=0 aid=1)
- [ 480.333345] wlan0: associated
- [ 600.707317] ecryptfs_decrypt_page: Error attempting to read lower page; rc = [-4]
- [ 600.707335] ecryptfs_readpage: Error decrypting page; rc = [-4]
- [ 751.698587] wlan0: direct probe to 00:24:6c:84:8d:90 (try 1/3)
- [ 751.896082] wlan0: direct probe to 00:24:6c:84:8d:90 (try 2/3)
- [ 752.096075] wlan0: direct probe to 00:24:6c:84:8d:90 (try 3/3)
- [ 752.296074] wlan0: direct probe to 00:24:6c:84:8d:90 timed out
- [ 758.618369] wlan0: deauthenticating from 00:24:6c:84:36:c0 by local choice (reason=2)
- [ 758.625906] cfg80211: All devices are disconnected, going to restore regulatory settings
- [ 758.625923] cfg80211: Restoring regulatory settings
- [ 758.625953] cfg80211: Calling CRDA to update world regulatory domain
- [ 758.658632] wlan0: authenticate with 00:24:6c:84:e1:c0 (try 1)
- [ 758.661611] wlan0: authenticated
- [ 758.694108] wlan0: associate with 00:24:6c:84:e1:c0 (try 1)
- [ 758.703006] wlan0: RX ReassocResp from 00:24:6c:84:e1:c0 (capab=0x421 status=0 aid=1)
- [ 758.703020] wlan0: associated
- [ 759.772664] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 759.772680] cfg80211: World regulatory domain updated:
- [ 759.772688] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 759.772701] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 759.772714] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 759.772726] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 759.772738] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 759.772750] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 871.220222] wlan0: deauthenticated from 00:24:6c:84:e1:c0 (Reason: 6)
- [ 871.236370] cfg80211: All devices are disconnected, going to restore regulatory settings
- [ 871.236387] cfg80211: Restoring regulatory settings
- [ 871.236400] cfg80211: Calling CRDA to update world regulatory domain
- [ 871.254978] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 871.254994] cfg80211: World regulatory domain updated:
- [ 871.255002] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 871.255016] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 871.255028] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 871.255039] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 871.255051] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 871.255063] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 872.359645] wlan0: authenticate with 00:24:6c:84:e2:40 (try 1)
- [ 872.361275] wlan0: authenticated
- [ 872.384285] wlan0: associate with 00:24:6c:84:e2:40 (try 1)
- [ 872.388779] wlan0: RX ReassocResp from 00:24:6c:84:e2:40 (capab=0x421 status=0 aid=1)
- [ 872.388794] wlan0: associated
- [ 1206.376914] wlan0: deauthenticating from 00:24:6c:84:e2:40 by local choice (reason=3)
- [ 1206.397811] cfg80211: All devices are disconnected, going to restore regulatory settings
- [ 1206.403971] cfg80211: Restoring regulatory settings
- [ 1206.404146] cfg80211: Calling CRDA to update world regulatory domain
- [ 1206.427901] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 1206.427918] cfg80211: World regulatory domain updated:
- [ 1206.427926] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 1206.427940] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1206.427952] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 1206.427964] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 1206.427976] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1206.427988] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1207.638576] wlan0: authenticate with 00:24:6c:84:e2:41 (try 1)
- [ 1207.644243] wlan0: authenticated
- [ 1207.645780] wlan0: associate with 00:24:6c:84:e2:41 (try 1)
- [ 1207.654985] wlan0: RX AssocResp from 00:24:6c:84:e2:41 (capab=0x431 status=0 aid=3)
- [ 1207.654999] wlan0: associated
- [ 1249.920511] wlan0: deauthenticating from 00:24:6c:84:e2:41 by local choice (reason=3)
- [ 1249.948259] cfg80211: All devices are disconnected, going to restore regulatory settings
- [ 1249.948275] cfg80211: Restoring regulatory settings
- [ 1249.948288] cfg80211: Calling CRDA to update world regulatory domain
- [ 1250.012769] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 1250.012785] cfg80211: World regulatory domain updated:
- [ 1250.012793] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 1250.012806] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1250.012819] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 1250.012831] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 1250.012843] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1250.012854] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1252.547396] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
- [ 1260.374028] PM: Syncing filesystems ... done.
- [ 1260.427137] PM: Preparing system for mem sleep
- [ 1260.756485] Freezing user space processes ... (elapsed 0.01 seconds) done.
- [ 1260.772245] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1260.788260] PM: Entering mem sleep
- [ 1260.788288] Suspending console(s) (use no_console_suspend to debug)
- [ 1260.788931] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [ 1260.789131] sd 0:0:0:0: [sda] Stopping disk
- [ 1261.223652] PM: suspend of drv:sd dev:0:0:0:0 complete after 434.731 msecs
- [ 1261.223695] PM: suspend of drv:scsi dev:target0:0:0 complete after 434.509 msecs
- [ 1261.223732] PM: suspend of drv:scsi dev:host0 complete after 434.390 msecs
- [ 1264.344300] PM: suspend of drv:psmouse dev:serio2 complete after 3554.988 msecs
- [ 1264.868767] PM: suspend of drv:i8042 dev:i8042 complete after 523.886 msecs
- [ 1264.870072] ACPI handle has no context!
- [ 1264.870092] jmb38x_ms 0000:09:00.3: PCI INT B disabled
- [ 1264.870105] ACPI handle has no context!
- [ 1264.870320] rtl8192se 0000:05:00.0: PCI INT A disabled
- [ 1264.870341] sdhci-pci 0000:09:00.0: PCI INT B disabled
- [ 1264.870574] ehci_hcd 0000:00:1d.7: PCI INT A disabled
- [ 1264.870604] uhci_hcd 0000:00:1d.3: PCI INT D disabled
- [ 1264.870666] uhci_hcd 0000:00:1d.2: PCI INT C disabled
- [ 1264.870697] uhci_hcd 0000:00:1d.1: PCI INT B disabled
- [ 1264.870729] uhci_hcd 0000:00:1d.0: PCI INT A disabled
- [ 1264.972737] HDA Intel 0000:00:1b.0: PCI INT A disabled
- [ 1264.972794] ACPI handle has no context!
- [ 1264.988074] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 117.089 msecs
- [ 1264.988128] PM: suspend of drv: dev:pci0000:00 complete after 116.882 msecs
- [ 1264.988167] PM: suspend of devices complete after 4199.472 msecs
- [ 1264.988175] PM: suspend devices took 4.200 seconds
- [ 1265.020449] PM: late suspend of devices complete after 32.261 msecs
- [ 1265.020495] ACPI: Preparing to enter system sleep state S3
- [ 1265.040308] PM: Saving platform NVS memory
- [ 1265.040324] Disabling non-boot CPUs ...
- [ 1265.144143] CPU 1 is now offline
- [ 1265.144871] Extended CMOS year: 2000
- [ 1265.144871] ACPI: Low-level resume complete
- [ 1265.144871] PM: Restoring platform NVS memory
- [ 1265.144871] CPU0: Thermal monitoring handled by SMI
- [ 1265.144871] Extended CMOS year: 2000
- [ 1265.144871] Enabling non-boot CPUs ...
- [ 1265.144871] Booting Node 0 Processor 1 APIC 0x1
- [ 1265.144871] smpboot cpu 1: start_ip = 99000
- [ 1265.041969] Initializing CPU#1
- [ 1265.240120] Switched to NOHz mode on CPU #1
- [ 1265.240282] CPU1 is up
- [ 1265.240651] ACPI: Waking up from system sleep state S3
- [ 1265.260447] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
- [ 1265.260536] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
- [ 1265.260549] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100102)
- [ 1265.260595] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b)
- [ 1265.260615] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x80318021)
- [ 1265.260627] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf010f010)
- [ 1265.260638] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
- [ 1265.260655] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
- [ 1265.260668] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
- [ 1265.260737] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40303)
- [ 1265.260757] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x80118001)
- [ 1265.260769] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020)
- [ 1265.260780] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20003030, writing 0x3030)
- [ 1265.260796] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
- [ 1265.260809] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
- [ 1265.260891] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
- [ 1265.260938] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
- [ 1265.260985] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
- [ 1265.261032] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
- [ 1265.261087] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
- [ 1265.261135] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
- [ 1265.261146] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
- [ 1265.261240] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
- [ 1265.261273] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
- [ 1265.261401] rtl8192se 0000:05:00.0: restoring config space at offset 0x5 (was 0x0, writing 0xf0100000)
- [ 1265.261414] rtl8192se 0000:05:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001)
- [ 1265.261426] rtl8192se 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
- [ 1265.261441] rtl8192se 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
- [ 1265.261532] sdhci-pci 0000:09:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0204000)
- [ 1265.261545] sdhci-pci 0000:09:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
- [ 1265.261561] sdhci-pci 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100106)
- [ 1265.261652] pci 0000:09:00.2: restoring config space at offset 0x4 (was 0x0, writing 0xf0204400)
- [ 1265.261665] pci 0000:09:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
- [ 1265.261680] pci 0000:09:00.2: restoring config space at offset 0x1 (was 0x100000, writing 0x40100102)
- [ 1265.261771] jmb38x_ms 0000:09:00.3: restoring config space at offset 0x4 (was 0x0, writing 0xf0204800)
- [ 1265.261785] jmb38x_ms 0000:09:00.3: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
- [ 1265.261800] jmb38x_ms 0000:09:00.3: restoring config space at offset 0x1 (was 0x100000, writing 0x40100106)
- [ 1265.261864] jme 0000:09:00.5: restoring config space at offset 0xf (was 0x100, writing 0x103)
- [ 1265.261894] jme 0000:09:00.5: restoring config space at offset 0x7 (was 0x1, writing 0x3001)
- [ 1265.261907] jme 0000:09:00.5: restoring config space at offset 0x6 (was 0x1, writing 0x3401)
- [ 1265.261922] jme 0000:09:00.5: restoring config space at offset 0x4 (was 0x0, writing 0xf0200000)
- [ 1265.261935] jme 0000:09:00.5: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
- [ 1265.261951] jme 0000:09:00.5: restoring config space at offset 0x1 (was 0x100000, writing 0x40100107)
- [ 1265.262529] PM: early resume of devices complete after 2.252 msecs
- [ 1265.262675] i915 0000:00:02.0: setting latency timer to 64
- [ 1265.262951] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 1265.262967] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 1265.263048] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
- [ 1265.263154] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 1265.263203] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 1265.263263] usb usb2: root hub lost power or was reset
- [ 1265.263296] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1265.263311] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 1265.263344] usb usb3: root hub lost power or was reset
- [ 1265.263373] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 1265.263388] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 1265.263421] usb usb4: root hub lost power or was reset
- [ 1265.263450] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
- [ 1265.263465] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 1265.263497] usb usb5: root hub lost power or was reset
- [ 1265.263527] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 1265.263542] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 1265.263702] pci 0000:00:1e.0: setting latency timer to 64
- [ 1265.263741] ahci 0000:00:1f.2: setting latency timer to 64
- [ 1265.263842] rtl8192se 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1265.263891] sdhci-pci 0000:09:00.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1265.263916] sdhci-pci 0000:09:00.0: setting latency timer to 64
- [ 1265.263969] jmb38x_ms 0000:09:00.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1265.263984] jmb38x_ms 0000:09:00.3: setting latency timer to 64
- [ 1265.269032] sd 0:0:0:0: [sda] Starting disk
- [ 1265.384145] PM: resume of drv: dev:ep_00 complete after 115.898 msecs
- [ 1265.384166] PM: resume of drv:hub dev:4-0:1.0 complete after 116.979 msecs
- [ 1265.384190] PM: resume of drv: dev:ep_81 complete after 116.840 msecs
- [ 1265.384203] PM: resume of drv:hub dev:3-0:1.0 complete after 118.429 msecs
- [ 1265.384251] PM: resume of drv: dev:ep_00 complete after 117.455 msecs
- [ 1265.384272] PM: resume of drv: dev:ep_81 complete after 117.647 msecs
- [ 1265.384304] PM: resume of drv:hub dev:2-0:1.0 complete after 119.024 msecs
- [ 1265.384335] PM: resume of drv: dev:ep_00 complete after 118.989 msecs
- [ 1265.384356] PM: resume of drv: dev:ep_81 complete after 119.033 msecs
- [ 1265.388111] PM: resume of drv:hub dev:5-0:1.0 complete after 119.590 msecs
- [ 1265.388161] PM: resume of drv: dev:ep_00 complete after 119.370 msecs
- [ 1265.388185] PM: resume of drv: dev:ep_81 complete after 119.531 msecs
- [ 1265.584098] ata2: SATA link down (SStatus 0 SControl 300)
- [ 1265.664995] PM: resume of drv:ac dev:ACPI0003:00 complete after 398.912 msecs
- [ 1265.686517] Extended CMOS year: 2000
- [ 1266.571305] irq 18: nobody cared (try booting with the "irqpoll" option)
- [ 1266.571314] Pid: 0, comm: swapper Not tainted 3.0.0-15-generic #26-Ubuntu
- [ 1266.571319] Call Trace:
- [ 1266.571332] [<c151a7a2>] ? printk+0x2d/0x2f
- [ 1266.571342] [<c10ab119>] __report_bad_irq+0x29/0xd0
- [ 1266.571351] [<c10774f4>] ? tick_handle_oneshot_broadcast+0xf4/0x100
- [ 1266.571358] [<c10ab374>] note_interrupt+0x104/0x150
- [ 1266.571365] [<c10a985e>] handle_irq_event_percpu+0x9e/0x200
- [ 1266.571374] [<c129aa2c>] ? pci_bus_write_config_dword+0x6c/0x80
- [ 1266.571382] [<c10263e8>] ? default_spin_lock_flags+0x8/0x10
- [ 1266.571390] [<c101d69d>] ? __io_apic_modify_irq+0x7d/0x90
- [ 1266.571397] [<c10a99fb>] handle_irq_event+0x3b/0x60
- [ 1266.571404] [<c10abab0>] ? unmask_irq+0x30/0x30
- [ 1266.571411] [<c10abafe>] handle_fasteoi_irq+0x4e/0xc0
- [ 1266.571415] <IRQ> [<c15355f2>] ? do_IRQ+0x42/0xc0
- [ 1266.571426] [<c1535530>] ? common_interrupt+0x30/0x38
- [ 1266.571434] [<c104007b>] ? proc_sched_show_task+0x167b/0x1a70
- [ 1266.571442] [<c12d51f7>] ? intel_idle+0xb7/0x110
- [ 1266.571450] [<c14109ed>] ? cpuidle_idle_call+0x7d/0x240
- [ 1266.571457] [<c100175a>] ? cpu_idle+0x8a/0xc0
- [ 1266.571464] [<c1501265>] ? rest_init+0x5d/0x68
- [ 1266.571472] [<c17c1763>] ? start_kernel+0x352/0x358
- [ 1266.571479] [<c17c13a2>] ? pass_bootoption.constprop.2+0xe2/0xe2
- [ 1266.571486] [<c17c10a9>] ? i386_start_kernel+0xa9/0xaf
- [ 1266.571490] handlers:
- [ 1266.571496] [<c13b5a50>] usb_hcd_irq
- [ 1266.571500] Disabling IRQ #18
- [ 1268.068275] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1268.074941] ata1.00: configured for UDMA/133
- [ 1268.163527] PM: resume of drv:sd dev:0:0:0:0 complete after 2894.508 msecs
- [ 1268.163564] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2894.334 msecs
- [ 1268.163580] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2476.643 msecs
- [ 1268.163873] PM: resume of devices complete after 2901.289 msecs
- [ 1268.164113] PM: resume devices took 2.904 seconds
- [ 1268.164208] PM: Finishing wakeup.
- [ 1268.164212] Restarting tasks ... done.
- [ 1268.291135] video LNXVIDEO:00: Restoring backlight state
- [ 1272.853093] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
- [ 1273.073056] jme 0000:09:00.5: irq 45 for MSI/MSI-X
- [ 1273.073132] jme 0000:09:00.5: eth0: Link is down
- [ 1273.073612] jme 0000:09:00.5: eth0: Link is down
- [ 1273.074515] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 1273.248768] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 1274.876828] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
- [ 1278.464056] wlan0: authenticate with c0:c1:c0:b1:1c:4c (try 1)
- [ 1278.467625] wlan0: authenticated
- [ 1278.516090] wlan0: associate with c0:c1:c0:b1:1c:4c (try 1)
- [ 1278.520219] wlan0: RX AssocResp from c0:c1:c0:b1:1c:4c (capab=0x411 status=0 aid=1)
- [ 1278.520231] wlan0: associated
- [ 1278.532113] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 1289.152038] wlan0: no IPv6 routers present
- [ 4222.014355] show_signal_msg: 24 callbacks suppressed
- [ 4222.014369] synergyc[1597]: segfault at c ip 00f63d87 sp bf918ba8 error 4 in libpthread-2.13.so[f5b000+17000]
- [15856.516381] cfg80211: All devices are disconnected, going to restore regulatory settings
- [15856.516402] cfg80211: Restoring regulatory settings
- [15856.516419] cfg80211: Calling CRDA to update world regulatory domain
- [15856.849424] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [15856.849439] cfg80211: World regulatory domain updated:
- [15856.849446] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [15856.849456] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [15856.849465] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [15856.849474] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [15856.849484] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [15856.849493] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [15857.604101] wlan0: authenticate with c0:c1:c0:b1:1c:4c (try 1)
- [15857.606999] wlan0: authenticated
- [15857.608672] wlan0: associate with c0:c1:c0:b1:1c:4c (try 1)
- [15857.613321] wlan0: RX ReassocResp from c0:c1:c0:b1:1c:4c (capab=0x411 status=0 aid=1)
- [15857.613333] wlan0: associated
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement