Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- OpenBSD 5.5-current (GENERIC) #87: Tue May 6 12:44:04 MDT 2014
- [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
- cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz ("GenuineIntel" 686-class) 2.20 GHz
- cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,CNXT-ID,xTPR,PERF
- real mem = 1055879168 (1006MB)
- avail mem = 1026211840 (978MB)
- mpath0 at root
- scsibus0 at mpath0: 256 targets
- mainbus0 at root
- bios0 at mainbus0: AT/286+ BIOS, date 11/15/05, BIOS32 rev. 0 @ 0xfd6e0, SMBIOS rev. 2.33 @ 0xe0010 (36 entries)
- bios0: vendor IBM version "1SET70WW (1.38 )" date 11/15/2005
- bios0: IBM 2684QVG
- acpi0 at bios0: rev 2
- acpi0: sleep states S0 S3 S4 S5
- acpi0: tables DSDT FACP SSDT ECDT BOOT
- acpi0: wakeup devices LID_(S3) SLPB(S3) PCI0(S4) USB0(S3) AC97(S4) LAN_(S4)
- acpitimer0 at acpi0: 3579545 Hz, 24 bits
- acpiec0 at acpi0
- acpiprt0 at acpi0: bus 0 (PCI0)
- acpiprt1 at acpi0: bus 1 (AGP_)
- acpicpu0 at acpi0: C3, C2, C1, FVS, 2200, 1200 MHz
- acpipwrres0 at acpi0: PUBS, resource for USB0
- acpitz0 at acpi0: critical temperature is 91 degC
- acpibtn0 at acpi0: LID_
- acpibtn1 at acpi0: SLPB
- acpibat0 at acpi0: BAT0 model "IBM-92P0987" serial 88 type LION oem "SANYO"
- acpiac0 at acpi0: AC unit online
- acpithinkpad0 at acpi0
- bios0: ROM list: 0xc0000/0xd000 0xcd000/0x1800 0xce800/0x1000 0xdc000/0x4000! 0xe0000/0x10000
- cpu0 at mainbus0: (uniprocessor)
- mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
- memory map conflict 0xe0000/0x4000
- pci0 at mainbus0 bus 0: configuration mode 1 (bios)
- pchb0 at pci0 dev 0 function 0 "ATI RS200 AGP" rev 0x02
- agp at pchb0 not configured
- ppb0 at pci0 dev 1 function 0 "ATI RS200 PCI" rev 0x00
- pci1 at ppb0 bus 1
- radeondrm0 at pci1 dev 5 function 0 "ATI Mobility M6" rev 0x00
- drm0 at radeondrm0
- radeondrm0: irq 11
- ohci0 at pci0 dev 2 function 0 "Acer Labs M5237 USB" rev 0x03: irq 11, version 1.0, legacy support
- "Acer Labs M5457 Modem" rev 0x00 at pci0 dev 3 function 0 not configured
- autri0 at pci0 dev 4 function 0 "Acer Labs M5451 Audio" rev 0x02: irq 11
- ac97: codec id 0x41445374 (Analog Devices AD1981B)
- ac97: codec features headphone, 20 bit DAC, No 3D Stereo
- audio0 at autri0
- midi0 at autri0: <4DWAVE MIDI UART>
- alipm0 at pci0 dev 6 function 0 "Acer Labs M7101 Power" rev 0x00: 223KHz clock
- iic0 at alipm0
- spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
- spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
- pcib0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
- bge0 at pci0 dev 11 function 0 "Broadcom BCM5901" rev 0x01, BCM5705 A1 (0x3001): irq 11, address 00:06:1b:d0:77:8a
- brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 1
- cbb0 at pci0 dev 12 function 0 "TI PCI1510 CardBus" rev 0x00: irq 11
- pciide0 at pci0 dev 15 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
- wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK3018GAS>
- wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
- wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
- atapiscsi0 at pciide0 channel 1 drive 0
- scsibus1 at atapiscsi0: 2 targets
- cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8177, NB21> ATAPI 5/cdrom removable
- cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
- usb0 at ohci0: USB revision 1.0
- uhub0 at usb0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
- isa0 at pcib0
- isadma0 at isa0
- pckbc0 at isa0 port 0x60/5
- pckbd0 at pckbc0 (kbd slot)
- pckbc0: using irq 1 for kbd slot
- wskbd0 at pckbd0: console keyboard
- pms0 at pckbc0 (aux slot)
- pckbc0: using irq 12 for aux slot
- wsmouse0 at pms0 mux 0
- pcppi0 at isa0 port 0x61
- spkr0 at pcppi0
- lpt2 at isa0 port 0x3bc/4: polled
- npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
- cardslot0 at cbb0 slot 0 flags 0
- cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
- pcmcia0 at cardslot0
- vscsi0 at root
- scsibus2 at vscsi0: 256 targets
- softraid0 at root
- scsibus3 at softraid0: 256 targets
- ath0 at cardbus0 dev 0 function 0 "Atheros AR5212" rev 0x01: irq 11
- ath0: AR2414 7.9 phy 4.5 rf2413 5.6, FCC2A*, address 00:14:78:11:24:82
- root on wd0a (47fea58686e4f390.a) swap on wd0b dump on wd0b
- drm: initializing kernel modesetting (RS200 0x1002:0x4337 0x1014:0x053A).
- error: [drm:pid0:radeon_agp_init] *ERROR* Unable to acquire AGP: 22
- drm: Forcing AGP to PCI mode
- radeondrm0: VRAM: 16M 0x000000003F000000 - 0x000000003FFFFFFF (16M used)
- radeondrm0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
- drm: PCI GART of 512M enabled (table at 0x0000000001EC7000).
- error: [drm:pid0:r100_cp_init_microcode] *ERROR* radeon_cp: Failed to load firmware "radeon-r100_cp"
- error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware!
- error: [drm:pid0:r100_startup] *ERROR* failed initializing CP (-2).
- error: [drm:pid0:r100_init] *ERROR* Disabling GPU acceleration
- drm: radeon: cp finalized
- drm: Panel ID String: 1024x768
- drm: Panel Size 1024x768
- radeondrm0: 1024x768
- wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
- wsdisplay0: screen 1-5 added (std, vt100 emulation)
Advertisement
Add Comment
Please, Sign In to add comment