Guest User

Untitled

a guest
Jun 3rd, 2016
160
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 57.31 KB | None | 0 0
  1. [ 0.000000] Initializing cgroup subsys cpu
  2. [ 0.000000] Linux version 3.1.10-geec365f-dirty (junnuvi@JunnuX201) (gcc version 4.8 (GCC) ) #3 SMP PREEMPT Tue May 31 03:49:33 UTC 2016
  3. [ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
  4. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] Machine: grouper
  6. [ 0.000000] Ignoring unrecognised tag 0x41000801
  7. [ 0.000000] Ignoring unrecognised tag 0x41000801
  8. [ 0.000000] Ignoring unrecognised tag 0x41000801
  9. [ 0.000000] Ignoring unrecognised tag 0x41000801
  10. [ 0.000000] Ignoring unrecognised tag 0x41000801
  11. [ 0.000000] Ignoring unrecognised tag 0x41000801
  12. [ 0.000000] Ignoring unrecognised tag 0x41000801
  13. [ 0.000000] Found tegra_fbmem: 007d0c80@abe01000
  14. [ 0.000000] Tegra reserved memory:
  15. [ 0.000000] LP0: bddf9000 - bddfafff
  16. [ 0.000000] Bootloader framebuffer: abe01000 - ac5d1fff
  17. [ 0.000000] Framebuffer: bec00000 - bf4fffff
  18. [ 0.000000] 2nd Framebuffer: bf500000 - bfdfffff
  19. [ 0.000000] Carveout: 00000000 - 00000000
  20. [ 0.000000] Vpr: 00000000 - 00000000
  21. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  22. [ 0.000000] On node 0 totalpages: 256768
  23. [ 0.000000] free_area_init_node: node 0, pgdat c0a66ae0, node_mem_map c0b01000
  24. [ 0.000000] Normal zone: 864 pages used for memmap
  25. [ 0.000000] Normal zone: 0 pages reserved
  26. [ 0.000000] Normal zone: 97440 pages, LIFO batch:31
  27. [ 0.000000] HighMem zone: 1436 pages used for memmap
  28. [ 0.000000] HighMem zone: 157028 pages, LIFO batch:31
  29. [ 0.000000] fuse_speedo_calib: ATE prog ver 4.0
  30. [ 0.000000] Tegra3: CPU Speedo ID 7, Soc Speedo ID 1
  31. [ 0.000000] Tegra Revision: A03 SKU: 0x83 CPU Process: 4 Core Process: 0
  32. [ 0.000000] tegra: PLLP fixed rate: 408000000
  33. [ 0.000000] Lowering cpu_lp maximum rate from 620000000 to 500000000
  34. [ 0.000000] Lowering sbus maximum rate from 378000000 to 267000000
  35. [ 0.000000] Lowering vi maximum rate from 470000000 to 409000000
  36. [ 0.000000] Lowering vde maximum rate from 600000000 to 416000000
  37. [ 0.000000] Lowering mpe maximum rate from 600000000 to 416000000
  38. [ 0.000000] Lowering 2d maximum rate from 600000000 to 416000000
  39. [ 0.000000] Lowering epp maximum rate from 600000000 to 416000000
  40. [ 0.000000] Lowering 3d maximum rate from 600000000 to 416000000
  41. [ 0.000000] Lowering 3d2 maximum rate from 600000000 to 416000000
  42. [ 0.000000] Lowering se maximum rate from 625000000 to 416000000
  43. [ 0.000000] Lowering host1x maximum rate from 300000000 to 267000000
  44. [ 0.000000] Lowering cbus maximum rate from 700000000 to 416000000
  45. [ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000
  46. [ 0.000000] Lowering ndflash maximum rate from 240000000 to 200000000
  47. [ 0.000000] Lowering sbc1 maximum rate from 160000000 to 100000000
  48. [ 0.000000] Lowering sbc2 maximum rate from 160000000 to 100000000
  49. [ 0.000000] Lowering sbc3 maximum rate from 160000000 to 100000000
  50. [ 0.000000] Lowering sbc4 maximum rate from 160000000 to 100000000
  51. [ 0.000000] Lowering sbc5 maximum rate from 160000000 to 100000000
  52. [ 0.000000] Lowering sbc6 maximum rate from 160000000 to 100000000
  53. [ 0.000000] Lowering dsia maximum rate from 500000000 to 275000000
  54. [ 0.000000] Lowering dsib maximum rate from 500000000 to 275000000
  55. [ 0.000000] Lowering cpu_g maximum rate from 1700000000 to 1300000000
  56. [ 0.000000] tegra dvfs: VDD_CPU nominal 1000mV, scaling enabled
  57. [ 0.000000] tegra dvfs: VDD_CORE nominal 1200mV, scaling enabled
  58. [ 0.000000] L310 cache controller enabled
  59. [ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e080001, Cache size: 1048576 B
  60. [ 0.000000] PERCPU: Embedded 6 pages/cpu @c140a000 s11168 r0 d13408 u32768
  61. [ 0.000000] pcpu-alloc: s11168 r0 d13408 u32768 alloc=8*4096
  62. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  63. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254468
  64. [ 0.000000] Kernel command line: tegra_wdt.heartbeat=30 tegra_wdt.heartbeat=30 tegraid=30.1.3.0.0 mem=1022M@2048M android.commchip=0 vmalloc=512M androidboot.serialno=015d4b33c2141807 video=tegrafb no_console_suspend=1 console=none debug_uartport=hsport usbcore.old_scheme_first=1 lp0_vec=8192@0xbddf9000 tegra_fbmem=8195200@0xabe01000 core_edp_mv=0 displayboard=0x8034:0x0001:0x00:0x00:0x01 audio_codec=rt5640 board_info=245:8034:f0:d1:3e tegraboot=sdmmc gpt gpt_sector=61079551 androidboot.bootloader=4.18 androidboot.baseband=unknown selinux=0 data_subdir=/media/0/multirom/roms/sailfishos-grouper-release/data
  65. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  66. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  67. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  68. [ 0.000000] allocated 4186112 bytes of page_cgroup
  69. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  70. [ 0.000000] Memory: 1003MB = 1003MB total
  71. [ 0.000000] Memory: 993408k/993408k available, 53120k reserved, 625844K highmem
  72. [ 0.000000] Virtual kernel memory layout:
  73. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  74. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  75. [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  76. [ 0.000000] vmalloc : 0xd8800000 - 0xf8000000 ( 504 MB)
  77. [ 0.000000] lowmem : 0xc0000000 - 0xd8000000 ( 384 MB)
  78. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  79. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  80. [ 0.000000] .text : 0xc0008000 - 0xc09682d8 (9601 kB)
  81. [ 0.000000] .init : 0xc0969000 - 0xc09b1ba0 ( 291 kB)
  82. [ 0.000000] .data : 0xc09b2000 - 0xc0a7bd30 ( 808 kB)
  83. [ 0.000000] .bss : 0xc0a7bd54 - 0xc0b00790 ( 531 kB)
  84. [ 0.000000] Preemptible hierarchical RCU implementation.
  85. [ 0.000000] NR_IRQS:800
  86. [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  87. [ 0.000000] Console: colour dummy device 80x30
  88. [ 0.000225] Calibrating delay loop... 1993.93 BogoMIPS (lpj=9969664)
  89. [ 0.060077] pid_max: default: 32768 minimum: 301
  90. [ 0.060188] Security Framework initialized
  91. [ 0.060271] Mount-cache hash table entries: 512
  92. [ 0.060930] Initializing cgroup subsys debug
  93. [ 0.060940] Initializing cgroup subsys cpuacct
  94. [ 0.060988] Initializing cgroup subsys memory
  95. [ 0.061019] Initializing cgroup subsys devices
  96. [ 0.061026] Initializing cgroup subsys freezer
  97. [ 0.061032] Initializing cgroup subsys net_cls
  98. [ 0.061038] Initializing cgroup subsys blkio
  99. [ 0.061054] Initializing cgroup subsys perf_event
  100. [ 0.061077] Initializing cgroup subsys bfqio
  101. [ 0.061099] CPU: Testing write buffer coherency: ok
  102. [ 0.061315] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  103. [ 0.181486] CPU1: Booted secondary processor
  104. [ 0.241470] CPU2: Booted secondary processor
  105. [ 0.301468] CPU3: Booted secondary processor
  106. [ 0.321292] Brought up 4 CPUs
  107. [ 0.321303] SMP: Total of 4 processors activated (7975.73 BogoMIPS).
  108. [ 0.321967] devtmpfs: initialized
  109. [ 0.324962] print_constraints: dummy:
  110. [ 0.325155] NET: Registered protocol family 16
  111. [ 0.325927] host1x bus init
  112. [ 0.326042] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  113. [ 0.441528] [MISC]: pcbid=0x01ae (projectid=0x00)
  114. [ 0.442809] The pingroup KB_ROW0 was configured to RSVD3 instead of <UNKNOWN>
  115. [ 0.443620] grouper_booting_info reg=3
  116. [ 0.443625] grouper_booting_info-SW reboot
  117. [ 0.444022] grouper_ti_edp_init: CPU regulator 6000 mA
  118. [ 0.444170] fiq_debugger_probe: could not install irq handler
  119. [ 0.444186] fiq_debugger: probe of fiq_debugger.0 failed with error -22
  120. [ 0.445209] ram_console: got buffer at beb00000, size 100000
  121. [ 0.445279] ram_console: found existing buffer, size 45630, start 45630
  122. [ 0.551390] console [ram-1] enabled
  123. [ 0.551612] TPS6591x GPIO2 was reprogrammed to follow state of SLEEP input
  124. [ 0.551747] Registering the core regulator
  125. [ 0.681283] [ELAN] Touch dirver register
  126. [ 0.681419] grouper_modem_init
  127. [ 0.681490] Registering gpio keys
  128. [ 0.681899] grouper_camera_init: pmic_id= 0x1
  129. [ 0.682033] mi1040 i2c_register_board_info
  130. [ 0.682174] *** MPU START *** mpuirq_init...
  131. [ 0.682312] *** MPU END *** mpuirq_init...
  132. [ 0.682500] grouper_emc_init:mem_bootstrap_ad4=1 mem_bootstrap_ad5=0
  133. [ 0.682621] tegra: validated EMC DFS table
  134. [ 0.682755] grouper_emc_init: Nakasi_dvfs_Hynix_table_0430
  135. [ 0.682830] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  136. [ 0.682963] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  137. [ 0.683045] hw-breakpoint: maximum watchpoint size is 4 bytes.
  138. [ 0.683965] tegra_iovmm_register: added iovmm-smmu
  139. [ 0.690884] bio: create slab <bio-0> at 0
  140. [ 0.691694] vgaarb: loaded
  141. [ 0.691832] i2c-core: driver [tps6591x] using legacy suspend method
  142. [ 0.691904] i2c-core: driver [tps6591x] using legacy resume method
  143. [ 0.692055] i2c-core: driver [tps80031] using legacy suspend method
  144. [ 0.692186] i2c-core: driver [tps80031] using legacy resume method
  145. [ 0.692307] i2c-core: driver [ricoh583] using legacy suspend method
  146. [ 0.692438] i2c-core: driver [ricoh583] using legacy resume method
  147. [ 0.692747] SCSI subsystem initialized
  148. [ 0.693720] usbcore: registered new interface driver usbfs
  149. [ 0.693849] usbcore: registered new interface driver hub
  150. [ 0.694001] usbcore: registered new device driver usb
  151. [ 0.694199] tegra-otg tegra-otg: otg transceiver registered
  152. [ 0.696000] tps6591x 4-002d: VERNUM is 02
  153. [ 0.697002] Wake18 for irq=118
  154. [ 0.697076] Enabling wake18
  155. [ 0.697618] print_constraints: tps6591x_VIO: 1500 <--> 3300 mV at 1800 mV normal standby
  156. [ 0.698942] print_constraints: tps6591x_VDD_1: 600 <--> 1500 mV at 600 mV normal standby
  157. [ 0.699916] print_constraints: tps6591x_VDD_2: 600 <--> 1500 mV at 1200 mV normal standby
  158. [ 0.700969] __tps6591x_ext_control_set(): EN1 reg: mask 0x46:0x08
  159. [ 0.706619] print_constraints: tps6591x_VDDCTRL: 600 <--> 1400 mV at 1025 mV normal standby
  160. [ 0.707370] print_constraints: tps6591x_LDO_1: 1000 <--> 3300 mV at 3000 mV normal standby
  161. [ 0.707460] set_supply: tps6591x_LDO_1: supplied by tps6591x_VDD_2
  162. [ 0.708440] print_constraints: tps6591x_LDO_2: 1050 mV normal standby
  163. [ 0.708587] set_supply: tps6591x_LDO_2: supplied by tps6591x_VDD_2
  164. [ 0.709045] print_constraints: tps6591x_LDO_3: 1000 <--> 3300 mV at 1000 mV normal standby
  165. [ 0.709676] print_constraints: tps6591x_LDO_4: 1000 <--> 3300 mV at 1200 mV normal standby
  166. [ 0.710184] print_constraints: tps6591x_LDO_5: 1000 <--> 3300 mV at 1000 mV normal standby
  167. [ 0.710874] print_constraints: tps6591x_LDO_6: 1200 mV normal standby
  168. [ 0.711019] set_supply: tps6591x_LDO_6: supplied by tps6591x_VIO
  169. [ 0.712047] print_constraints: tps6591x_LDO_7: 1200 mV normal standby
  170. [ 0.712194] set_supply: tps6591x_LDO_7: supplied by tps6591x_VIO
  171. [ 0.712965] print_constraints: tps6591x_LDO_8: 1000 <--> 3300 mV at 1000 mV normal standby
  172. [ 0.713053] set_supply: tps6591x_LDO_8: supplied by tps6591x_VIO
  173. [ 0.714036] tps6591x register misc device for I2C stress test rc=0
  174. [ 0.715113] print_constraints: tps62361: 500 <--> 1770 mV at 1200 mV normal standby
  175. [ 0.715598] tps62360 register misc device for I2C stress test rc=0 chip_id=(null)
  176. [ 0.720832] Advanced Linux Sound Architecture Driver Version 1.0.24.
  177. [ 0.721250] Bluetooth: Core ver 2.16
  178. [ 0.721428] NET: Registered protocol family 31
  179. [ 0.721501] Bluetooth: HCI device and connection manager initialized
  180. [ 0.721576] Bluetooth: HCI socket layer initialized
  181. [ 0.721708] Bluetooth: L2CAP socket layer initialized
  182. [ 0.721792] Bluetooth: SCO socket layer initialized
  183. [ 0.722180] cfg80211: Calling CRDA to update world regulatory domain
  184. [ 0.722445] NFC: NFC Core ver 0.1
  185. [ 0.722607] NET: Registered protocol family 39
  186. [ 0.723339] print_constraints: fixed_reg_en_5v_cp: 5000 mV normal standby
  187. [ 0.723959] print_constraints: fixed_reg_en_5v0: 5000 mV normal standby
  188. [ 0.724699] print_constraints: fixed_reg_en_ddr: 1500 mV normal standby
  189. [ 0.725318] print_constraints: fixed_reg_en_3v3_sys: 3300 mV normal standby
  190. [ 0.725741] print_constraints: fixed_reg_en_3v3_modem: 3300 mV normal standby
  191. [ 0.726051] print_constraints: fixed_reg_cam1_ldo_en: 2800 mV normal standby
  192. [ 0.726190] set_supply: fixed_reg_cam1_ldo_en: supplied by fixed_reg_en_3v3_sys
  193. [ 0.726466] print_constraints: fixed_reg_cam3_ldo_en: 3300 mV normal standby
  194. [ 0.726608] set_supply: fixed_reg_cam3_ldo_en: supplied by fixed_reg_en_3v3_sys
  195. [ 0.726928] print_constraints: fixed_reg_en_vdd_com: 3300 mV normal standby
  196. [ 0.727010] set_supply: fixed_reg_en_vdd_com: supplied by fixed_reg_en_3v3_sys
  197. [ 0.727335] print_constraints: fixed_reg_en_3v3_fuse: 3300 mV normal standby
  198. [ 0.727417] set_supply: fixed_reg_en_3v3_fuse: supplied by fixed_reg_en_3v3_sys
  199. [ 0.727743] print_constraints: fixed_reg_en_3v3_emmc: 3300 mV normal standby
  200. [ 0.727884] set_supply: fixed_reg_en_3v3_emmc: supplied by fixed_reg_en_3v3_sys
  201. [ 0.728157] print_constraints: fixed_reg_en_1v8_cam: 1800 mV normal standby
  202. [ 0.728302] set_supply: fixed_reg_en_1v8_cam: supplied by tps6591x_VIO
  203. [ 0.728670] print_constraints: fixed_reg_dis_5v_switch: 5000 mV normal standby
  204. [ 0.728755] set_supply: fixed_reg_dis_5v_switch: supplied by fixed_reg_en_5v0
  205. [ 0.729069] print_constraints: fixed_reg_en_usb1_vbus_oc: 5000 mV normal standby
  206. [ 0.729211] set_supply: fixed_reg_en_usb1_vbus_oc: supplied by fixed_reg_dis_5v_switch
  207. [ 0.729493] print_constraints: fixed_reg_en_vddio_vid_oc: 5000 mV normal standby
  208. [ 0.729632] set_supply: fixed_reg_en_vddio_vid_oc: supplied by fixed_reg_dis_5v_switch
  209. [ 0.729907] gpio_request: gpio-59 (fixed_reg_en_vdd_bl) status -16
  210. [ 0.729986] reg-fixed-voltage reg-fixed-voltage.4: Could not obtain regulator enable GPIO 59: -16
  211. [ 0.730124] reg-fixed-voltage: probe of reg-fixed-voltage.4 failed with error -16
  212. [ 0.730395] print_constraints: fixed_reg_en_vdd_pnl1: 3300 mV normal standby
  213. [ 0.730478] set_supply: fixed_reg_en_vdd_pnl1: supplied by fixed_reg_en_3v3_sys
  214. [ 0.731175] tegra: started io power detection dynamic control
  215. [ 0.731250] tegra: NO_IO_POWER setting 0x1200
  216. [ 0.731400] Switching to clocksource timer_us
  217. [ 0.731491] stop_machine_cpu_stop smp=1
  218. [ 0.731498] stop_machine_cpu_stop smp=2
  219. [ 0.731504] stop_machine_cpu_stop smp=3
  220. [ 0.731510] stop_machine_cpu_stop smp=0
  221. [ 0.741323] Switched to NOHz mode on CPU #0
  222. [ 0.741501] Switched to NOHz mode on CPU #3
  223. [ 0.741507] Switched to NOHz mode on CPU #2
  224. [ 0.741521] Switched to NOHz mode on CPU #1
  225. [ 0.742779] nvmap_page_pool_init: nvmap uc page pool size=31044 pages
  226. [ 0.840408] nvmap_page_pool_init: nvmap wc page pool size=31044 pages
  227. [ 0.938027] nvmap_page_pool_init: nvmap iwb page pool size=31044 pages
  228. [ 1.036516] tegra-nvmap tegra-nvmap: created carveout iram (255KiB)
  229. [ 1.044732] NET: Registered protocol family 2
  230. [ 1.045023] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  231. [ 1.045439] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  232. [ 1.046367] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  233. [ 1.047227] TCP: Hash tables configured (established 65536 bind 65536)
  234. [ 1.047358] TCP reno registered
  235. [ 1.047434] UDP hash table entries: 256 (order: 1, 8192 bytes)
  236. [ 1.047574] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  237. [ 1.047872] NET: Registered protocol family 1
  238. [ 1.048234] RPC: Registered named UNIX socket transport module.
  239. [ 1.048309] RPC: Registered udp transport module.
  240. [ 1.048437] RPC: Registered tcp transport module.
  241. [ 1.048509] RPC: Registered tcp NFSv4.1 backchannel transport module.
  242. [ 1.048642] PCI: CLS 0 bytes, default 32
  243. [ 1.048850] Unpacking initramfs...
  244. [ 1.073172] Freeing initrd memory: 544K
  245. [ 1.074331] host1x host1x: initialized
  246. [ 1.074478] PMU: registered new PMU device of type 0
  247. [ 1.075068] Tegra auto-hotplug initialized: disabled
  248. [ 1.075210] cpu-tegra: init EDP limit: 1150 MHz
  249. [ 1.091367] highmem bounce pool size: 64 pages
  250. [ 1.091727] ashmem: initialized
  251. [ 1.093054] NTFS driver 2.1.30 [Flags: R/O].
  252. [ 1.093332] fuse init (API version 7.17)
  253. [ 1.093777] msgmni has been set to 718
  254. [ 1.093875] Registering char device tf_driver (122:0)
  255. [ 1.094040] TF : INFO 00000001 00:00:00.000 ------ ------ Kernel --------- Booting... (t=00:00:04.888) TFNXBF01.15.36932 /Trusted-Logic
  256. [ 1.095275] io scheduler noop registered
  257. [ 1.095353] io scheduler deadline registered
  258. [ 1.095426] io scheduler row registered (default)
  259. [ 1.095610] io scheduler cfq registered
  260. [ 1.095714] io scheduler bfq registered
  261. [ 1.096669] mpe mpe: initialized
  262. [ 1.097962] gr3d gr3d: initialized
  263. [ 1.098221] dsi dsi: initialized
  264. [ 1.099009] gr2d gr2d: initialized
  265. [ 1.099263] isp isp: initialized
  266. [ 1.099523] vi vi: initialized
  267. [ 1.100148] Disp: diff_msec= 4894
  268. [ 1.351086] tegradc tegradc.0: probed
  269. [ 1.351501] tegradc tegradc.0: probed
  270. [ 1.351792] Wake4 for irq=335
  271. [ 1.352309] nvhdcp: using "always on" policy.
  272. [ 1.352747] tegradc tegradc.1: probed
  273. [ 1.353098] tegradc tegradc.1: probed
  274. [ 1.354007] tegra_uart.1: ttyHS1 at MMIO 0x70006040 (irq = 69) is a TEGRA_UART
  275. [ 1.451855] Registered UART port ttyHS1
  276. [ 1.452006] tegra_uart.2: ttyHS2 at MMIO 0x70006200 (irq = 78) is a TEGRA_UART
  277. [ 1.611857] Registered UART port ttyHS2
  278. [ 1.612002] tegra_uart.3: ttyHS3 at MMIO 0x70006300 (irq = 122) is a TEGRA_UART
  279. [ 1.771857] Registered UART port ttyHS3
  280. [ 1.772007] tegra_uart.4: ttyHS4 at MMIO 0x70006400 (irq = 123) is a TEGRA_UART
  281. [ 1.931857] Registered UART port ttyHS4
  282. [ 1.932011] Initialized tegra uart driver
  283. [ 1.935018] loop: module loaded
  284. [ 1.935174] i2c-core: driver [apds9802als] using legacy suspend method
  285. [ 1.935248] i2c-core: driver [apds9802als] using legacy resume method
  286. [ 1.935448] nct1008_probe+
  287. [ 1.935550] nct1008 4-004c: no regulator found for vdd. Assuming vdd is always powered
  288. [ 1.937918] nct1008 register misc device for I2C stress test rc=0
  289. [ 1.938180] nct1008 4-004c: nct1008_probe: initialized
  290. [ 1.939301] nct1008_get_temp: ret temp=55C
  291. [ 1.939649] nct1008_probe-
  292. [ 1.939750] i2c-core: driver [nct1008] using legacy suspend method
  293. [ 1.939881] i2c-core: driver [nct1008] using legacy resume method
  294. [ 1.940078] bcm4330_rfkill_probe: can't find bcm4330_32k_clk. assuming 32k clock to chip
  295. [ 1.940153] bcm4330_rfkill_probe : can't find reset gpio.
  296. [ 1.940466] vibrator_init:Couldn't get regulator vdd_vbrtr
  297. [ 1.940587] Loading pn544 driver
  298. [ 1.940857] pn544_probe : requesting IRQ 408
  299. [ 1.941182] PPP generic driver version 2.4.2
  300. [ 1.941391] PPP Deflate Compression module registered
  301. [ 1.941525] PPP BSD Compression module registered
  302. [ 1.941811] PPP MPPE Compression module registered
  303. [ 1.941963] NET: Registered protocol family 24
  304. [ 1.942038] tun: Universal TUN/TAP device driver, 1.6
  305. [ 1.942112] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  306. [ 1.942416] usbcore: registered new interface driver asix
  307. [ 1.942519] usbcore: registered new interface driver cdc_ether
  308. [ 1.942674] usbcore: registered new interface driver smsc95xx
  309. [ 1.942771] usbcore: registered new interface driver rndis_host
  310. [ 1.942926] usbcore: registered new interface driver cdc_subset
  311. [ 1.943076] cdc_ncm: 04-Aug-2011
  312. [ 1.943173] usbcore: registered new interface driver cdc_ncm
  313. [ 1.943272] usbcore: registered new interface driver bb_raw_ip_net
  314. [ 1.943431] usbcore: registered new interface driver rndis_wlan
  315. [ 1.943517] smb347_charger: [smb347_init] project_id=0, pcba_ver=5, dock_in_gpio=164
  316. [ 1.946838] [charger] Disable AICL, retval=93 setting=83
  317. [ 1.947297] [charger] set cahrger limmit, limit=900 retval =73 setting=73
  318. [ 1.947698] [charger] re-enable AICL, setting=93
  319. [ 1.972694] GPIO pin irq 388 requested ok, smb347_DOCK_IN# = H
  320. [ 1.972772] Wake1 for irq=393
  321. [ 1.972872] GPIO pin irq 393 requested ok, smb347_INOK = L
  322. [ 1.973043] i2c-core: driver [smb347] using legacy suspend method
  323. [ 1.973114] i2c-core: driver [smb347] using legacy resume method
  324. [ 1.973274] bq27541_probe + client->addr= 55
  325. [ 1.974623] is_legal_pack device name: ME370
  326. [ 1.975413] bq27541_get_psp status: Discharging ret= 0x0101
  327. [ 1.976073] bq27541_get_psp voltage_now= 3762000 uV
  328. [ 1.976781] bq27541_get_capacity = 50% ret= 53
  329. [ 1.977422] bq27541_get_psp temperature= 350 (0.1\xffffffa2XC)
  330. [ 1.978628] bq27541_get_psp current = -738 mA
  331. [ 1.979337] Wake25 for irq=372
  332. [ 1.979465] bq27541_get_psp status: Discharging ret= 0x0101
  333. [ 1.979643] setup_low_battery_irq irq=372, LL_BAT_T30=0
  334. [ 1.979718] Wake25 for irq=372
  335. [ 1.979788] Enabling wake25
  336. [ 1.979861] gpio bank wake found: wake25 for irq=87
  337. [ 1.979991] Enabling wake25
  338. [ 1.980110] The USB cable status = 0
  339. [ 1.980186] bq27541_probe - bq27541-battery driver registered
  340. [ 1.980349] i2c-core: driver [bq27541-battery] using legacy suspend method
  341. [ 1.980511] bq27541_get_psp voltage_now= 3762000 uV
  342. [ 1.980611] i2c-core: driver [bq27541-battery] using legacy resume method
  343. [ 1.980752] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  344. [ 1.984995] Timed out waiting for lock bit on pll pll_u
  345. [ 1.985177] bq27541_get_capacity = 50% ret= 53
  346. [ 1.985386] couldn't get regulator avdd_usb: -19
  347. [ 1.985880] bq27541_get_psp temperature= 350 (0.1\xffffffa2XC)
  348. [ 1.987138] bq27541_get_psp current = -738 mA
  349. [ 1.989028] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
  350. [ 1.989247] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
  351. [ 2.011880] tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000
  352. [ 2.031867] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
  353. [ 2.032054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  354. [ 2.032130] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  355. [ 2.032261] usb usb1: Product: Tegra EHCI Host Controller
  356. [ 2.032333] usb usb1: Manufacturer: Linux 3.1.10-geec365f-dirty ehci_hcd
  357. [ 2.032466] usb usb1: SerialNumber: tegra-ehci.1
  358. [ 2.032920] hub 1-0:1.0: USB hub found
  359. [ 2.033064] hub 1-0:1.0: 1 port detected
  360. [ 2.033368] Wake40 for irq=53
  361. [ 2.033441] Enabling wake40
  362. [ 2.033639] usbcore: registered new interface driver cdc_acm
  363. [ 2.033771] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  364. [ 2.033938] usbcore: registered new interface driver cdc_wdm
  365. [ 2.034010] Initializing USB Mass Storage driver...
  366. [ 2.034189] usbcore: registered new interface driver usb-storage
  367. [ 2.034262] USB Mass Storage support registered.
  368. [ 2.034372] usbcore: registered new interface driver libusual
  369. [ 2.034573] usbcore: registered new interface driver usbserial
  370. [ 2.034705] usbserial: USB Serial Driver core
  371. [ 2.037640] usbcore: registered new interface driver baseband_usb_58b_41_1
  372. [ 2.037755] USB Serial support registered for GSM modem (1-port)
  373. [ 2.037905] usbcore: registered new interface driver option
  374. [ 2.038038] option: v0.7.2:USB Driver for GSM modems
  375. [ 2.038135] USB Serial support registered for pl2303
  376. [ 2.038237] usbcore: registered new interface driver pl2303
  377. [ 2.038368] pl2303: Prolific PL2303 USB to serial adaptor driver
  378. [ 2.038441] NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
  379. [ 2.038574] read_hw_version project_id = 0X0, pcb_id = 0X5
  380. [ 2.038866] phy->instance = 0, phy->xcvr_setup_value = 59
  381. [ 2.038957] couldn't get regulator avdd_usb: -19
  382. [ 2.039030] tegra_gpio_enable : Invalid gpio ID - 260
  383. [ 2.039484] tegra_usb_phy_open instance 0 TI AC_PRESENT_GPIO = 260
  384. [ 2.042087] fsl-tegra-udc fsl-tegra-udc: usb_bat_chg regulator not registered: USB charging will not be enabled
  385. [ 2.061880] tegra-otg tegra-otg: SUSPEND --> PERIPHERAL
  386. [ 2.062018] fsl_vbus_session(): vbus_active = 0 and is_active = 1
  387. [ 2.064494] android_usb gadget: Mass Storage Function, version: 2009/09/11
  388. [ 2.064631] android_usb gadget: Number of LUNs=1
  389. [ 2.064706] lun0: LUN: removable file: (no medium)
  390. [ 2.065052] Gadget Android: controller 'fsl-tegra-udc' not recognized
  391. [ 2.065132] android_usb gadget: android_usb ready
  392. [ 2.065263] fsl-tegra-udc: bind to driver android_usb
  393. [ 2.065448] usbcore: registered new interface driver xpad
  394. [ 2.065607] usbcore: registered new interface driver usb_acecad
  395. [ 2.065681] acecad: v3.2:USB Acecad Flair tablet driver
  396. [ 2.065836] usbcore: registered new interface driver aiptek
  397. [ 2.065907] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
  398. [ 2.066035] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
  399. [ 2.066191] usbcore: registered new interface driver gtco
  400. [ 2.066263] GTCO usb driver version: 2.00.0006
  401. [ 2.066366] usbcore: registered new interface driver hanwang
  402. [ 2.066589] usbcore: registered new interface driver kbtab
  403. [ 2.066660] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
  404. [ 2.066824] usbcore: registered new interface driver wacom
  405. [ 2.066895] wacom: v1.52:USB Wacom tablet driver
  406. [ 2.067026] [ektf3k]:[elan] elan_ktf3k_ts_init
  407. [ 2.067182] [ektf3k]:[ELAN] Start HW reset!
  408. [ 2.321866] [ektf3k]:The boot code is new!
  409. [ 2.471937] INOK=L
  410. [ 2.472203] smb347_charger: [cable_type_detect] Reg39 : 0x10
  411. [ 2.472521] smb347_charger: [cable_type_detect] Reg3F : 0xc0
  412. [ 2.472593] smb347_charger: [cable_type_detect] USB_IN
  413. [ 2.472910] smb347_charger: [cable_type_detect] Reg3E : 0x0c
  414. [ 2.472982] Cable: SDP
  415. [ 2.473052] ========================================================
  416. [ 2.473181] battery_callback usb_cable_state = 1
  417. [ 2.473251] ========================================================
  418. [ 2.473381] battery_callback cable_wake_lock 5 sec...
  419. [ 2.473384]
  420. [ 3.061863] cable_detection_work_handler(): vbus_active = 0 and is_active = 1
  421. [ 3.062060] USB device controller was not ready
  422. [ 3.132014] [ektf3k]:[elan] __hello_packet_handler: hello packet 55:55:55:55
  423. [ 3.132148] [ektf3k]:[elan] hello packet's rc = 0
  424. [ 3.343692] [ektf3k]:[elan] __fw_packet_handler: firmware version: 0xb018
  425. [ 3.345652] [ektf3k]:[elan] __fw_packet_handler: X resolution: 0x0078
  426. [ 3.347608] [ektf3k]:[elan] __fw_packet_handler: Y resolution: 0x00c6
  427. [ 3.349511] [ektf3k]:[elan] __fw_packet_handler: firmware id: 0x3121
  428. [ 3.349645] [ektf3k]:[Elan] Max X=2111, Max Y=1279
  429. [ 3.349840] input: elan-touchscreen as /devices/virtual/input/input0
  430. [ 3.350180] [ektf3k]:The firmware was version 0xB018 and id:0x3021
  431. [ 3.350277] [ektf3k]: /proc/ektf_dbg created
  432. [ 3.350624] [ektf3k]:[elan] Start touchscreen elan-touchscreen in interrupt mode
  433. [ 3.350797] [ektf3k]:[ELAN]misc_register finished!!
  434. [ 3.350931] elan-ktf3k 1-0010: Update power source to 1
  435. [ 3.367105] in function ____rmi_bus_init____
  436. [ 3.367267] rmi_bus_init: successfully registered RMI bus.
  437. [ 3.367378] rmi_spi_init: registering synaptics spi driver (ref=124)
  438. [ 3.367508] driver.owner = 0x0
  439. [ 3.367578] driver.name = rmi_spi
  440. [ 3.367705] id_table[0].name = rmi
  441. [ 3.367775] id_table[1].name = rmi_spi
  442. [ 3.367843] probe function ptr = 0xc06f07a0
  443. [ 3.367987] in function ____rmi_register_driver____
  444. [ 3.368081] in function ____rmi_get_function_handler____
  445. [ 3.368210] in function ____rmi_get_function_handler____
  446. [ 3.368283] in function ____rmi_get_function_handler____
  447. [ 3.368412] in function ____rmi_get_function_handler____
  448. [ 3.368485] in function ____rmi_get_function_handler____
  449. [ 3.368616] in function ____rmi_get_function_handler____
  450. [ 3.369018] lid_init+ #####
  451. [ 3.369151] hall_sensor: [lid_init] start LID init.....
  452. [ 3.369449] input: lid_input as /devices/virtual/input/input1
  453. [ 3.369690] Wake28 for irq=374
  454. [ 3.369863] Wake28 for irq=374
  455. [ 3.369934] Enabling wake28
  456. [ 3.370007] CAP1106: [cap1106_init] Cap1106 driver doesn't support this project
  457. [ 3.372833] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:49:51
  458. [ 3.374903] tps6591x 4-002d:
  459. [ 3.374907] getting alarm time::
  460. [ 3.375104] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/1/2000 0:0:0
  461. [ 3.375451] using rtc device, rtc_tps6591x, for alarms
  462. [ 3.375544] rtc_tps6591x rtc_tps6591x.0: rtc core: registered rtc_tps6591x as rtc0
  463. [ 3.380277] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:49:51
  464. [ 3.511986] i2c /dev entries driver
  465. [ 3.512769] Linux video capture interface: v2.00
  466. [ 3.512906] usbcore: registered new interface driver uvcvideo
  467. [ 3.512979] USB Video Class driver (1.1.1)
  468. [ 3.513225] trpc_sema_init: registered misc dev 10:44
  469. [ 3.513413] trpc_node_register: Adding 'local' to node list
  470. [ 3.514551] nvavp nvavp: allocated IOVM at ff00000 for AVP os
  471. [ 3.514931] tegra_camera tegra_camera: tegra_camera_probe
  472. [ 3.515349] sensor_init+ #####
  473. [ 3.515450] mi1040 sensor_probe
  474. [ 3.515704] sensor_init- #####
  475. [ 3.515932] al3010_init+ #####
  476. [ 3.516004] light sensor info : al3010 init
  477. [ 3.516829] light sensor info : al3010 probe successed
  478. [ 3.516963] al3010 2-001c: driver version 1.0 enabled
  479. [ 3.517254] i2c-core: driver [al3010] using legacy suspend method
  480. [ 3.517384] i2c-core: driver [al3010] using legacy resume method
  481. [ 3.517462] al3010_init- #####
  482. [ 3.517869] device-mapper: uevent: version 1.0.3
  483. [ 3.518191] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: [email protected]
  484. [ 3.518357] Bluetooth: HCI UART driver ver 2.2
  485. [ 3.518430] Bluetooth: HCI H4 protocol initialized
  486. [ 3.518505] Bluetooth: HCILL protocol initialized
  487. [ 3.518637] Bluetooth: BlueSleep Mode Driver Ver 1.1
  488. [ 3.518765] Wake7 for irq=390
  489. [ 3.519401] cpuidle: using governor ladder
  490. [ 3.519763] cpuidle: using governor menu
  491. [ 3.519882] sdhci: Secure Digital Host Controller Interface driver
  492. [ 3.520012] sdhci: Copyright(c) Pierre Ossman
  493. [ 3.520081] sdhci-pltfm: SDHCI platform and OF driver helper
  494. [ 3.520212] sdhci_tegra_init+ #####
  495. [ 3.520376] sdhci-tegra sdhci-tegra.3: Error: tegra3 io dpd not supported for sdhci-tegra.3
  496. [ 3.521528] mmc0: Invalid maximum block size, assuming 512 bytes
  497. [ 3.522878] Registered led device: mmc0::
  498. [ 3.526293] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
  499. [ 3.526421] sdhci-tegra sdhci-tegra.2: Error: tegra3 io dpd not supported for sdhci-tegra.2
  500. [ 3.527569] mmc1: Invalid maximum block size, assuming 512 bytes
  501. [ 3.527663] mmc1: no vmmc regulator found
  502. [ 3.528862] Registered led device: mmc1::
  503. [ 3.531090] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA
  504. [ 3.531258] sdhci_tegra_init- #####
  505. [ 3.531371] gpio_request: gpio-263 (statled) status -16
  506. [ 3.531508] leds-gpio: probe of leds-gpio failed with error -16
  507. [ 3.532808] usbcore: registered new interface driver usbhid
  508. [ 3.532942] usbhid: USB HID core driver
  509. [ 3.623611] [mmc]:mmc_decode_cid:113 cid.prv 0x1
  510. [ 3.635183] [mmc]:mmc_read_ext_csd:285 ext_csd.sectors 0x3a40000 prod_name HBG4e BOOT_MULTI 0x10
  511. [ 3.641562] mmc0: new high speed DDR MMC card at address 0001
  512. [ 3.641826] mmcblk mmc0:0001: Card claimed for testing.
  513. [ 3.642213] mmcblk0: mmc0:0001 HBG4e 29.1 GiB
  514. [ 3.642533] mmcblk0boot0: mmc0:0001 HBG4e partition 1 2.00 MiB
  515. [ 3.642829] mmcblk0boot1: mmc0:0001 HBG4e partition 2 2.00 MiB
  516. [ 3.645090] Primary GPT is invalid, using alternate GPT.
  517. [ 3.645206] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
  518. [ 3.651752] mmcblk0boot1: unknown partition table
  519. [ 3.654636] mmcblk0boot0: unknown partition table
  520. [ 3.654889] [mmc]:mmc_rescan_try_freq:1921 mmc0: eMMC completed
  521. [ 3.782921] inv-mpu-iio 2-0068: mpu6050 is ready to go!
  522. [ 3.783107] i2c-core: driver [LTR_558ALS] using legacy suspend method
  523. [ 3.783240] i2c-core: driver [LTR_558ALS] using legacy resume method
  524. [ 3.784132] inv_ami306_probe: Probe name ami306
  525. [ 3.784298] RIL: [ril_init] RIL init
  526. [ 3.784370] RIL: [ril_init] Ril driver doesn't support this project
  527. [ 4.281865] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
  528. [ 4.322344] usbcore: registered new interface driver snd-usb-audio
  529. [ 4.322834] rt5640_modinit
  530. [ 4.322942] rt5640_i2c_probe
  531. [ 4.462299] DSP version code = 0x501a
  532. [ 4.462588] ************************realtek_ce_init_hwdep*************************************
  533. [ 4.462666] do_rt5640_dsp_set_mode mode=0
  534. [ 4.462804] rt5640 4-001c: w->name=SDI1 TX Mux
  535. [ 4.462876] rt5640 4-001c: path->name=IF2 path->connect=0
  536. [ 4.463007] rt5640 4-001c: path->name=IF1 path->connect=1
  537. [ 4.463126] rt5640 4-001c: w->name=Stereo DAC MIXL
  538. [ 4.463201] rt5640 4-001c: path->name=DAC L1 Switch connect=1
  539. [ 4.463363] rt5640 4-001c: w->name=Stereo DAC MIXL
  540. [ 4.463436] rt5640 4-001c: path->name=DAC L2 Switch connect=0
  541. [ 4.463751] rt5640 4-001c: w->name=Stereo DAC MIXR
  542. [ 4.463826] rt5640 4-001c: path->name=DAC R1 Switch connect=1
  543. [ 4.463991] rt5640 4-001c: w->name=Stereo DAC MIXR
  544. [ 4.464065] rt5640 4-001c: path->name=DAC R2 Switch connect=0
  545. [ 4.464380] rt5640 4-001c: w->name=Stereo ADC MIXL
  546. [ 4.464456] rt5640 4-001c: path->name=ADC1 Switch connect=1
  547. [ 4.464621] rt5640 4-001c: w->name=Stereo ADC MIXR
  548. [ 4.464695] rt5640 4-001c: path->name=ADC1 Switch connect=1
  549. [ 4.464856] rt5640 4-001c: w->name=Stereo ADC MIXL
  550. [ 4.464930] rt5640 4-001c: path->name=ADC2 Switch connect=1
  551. [ 4.465032] rt5640 4-001c: w->name=Stereo ADC MIXR
  552. [ 4.465163] rt5640 4-001c: path->name=ADC2 Switch connect=1
  553. [ 4.465265] rt5640 4-001c: w->name=Mono ADC MIXL
  554. [ 4.465396] rt5640 4-001c: path->name=ADC2 Switch connect=0
  555. [ 4.465497] rt5640 4-001c: w->name=Mono ADC MIXR
  556. [ 4.465628] rt5640 4-001c: path->name=ADC2 Switch connect=0
  557. [ 4.482441] bq27541_get_psp status: Charging ret= 0x0101
  558. [ 4.483146] bq27541_get_psp voltage_now= 3748000 uV
  559. [ 4.483787] bq27541_get_capacity = 50% ret= 53
  560. [ 4.484233] asoc: rt5640-aif1 <-> tegra30-i2s.1 mapping ok
  561. [ 4.484432] bq27541_get_psp temperature= 350 (0.1\xffffffa2XC)
  562. [ 4.485628] bq27541_get_psp current = -582 mA
  563. [ 4.534665] asoc: dit-hifi <-> tegra30-spdif mapping ok
  564. [ 4.600104] asoc: dit-hifi <-> tegra30-i2s.3 mapping ok
  565. [ 4.601302] headset_init+ #####
  566. [ 4.601374] HEADSET: Headset detection init
  567. [ 4.601677] HEADSET: Headset detection mode
  568. [ 4.601809] HEADSET: Config LineOut detection gpio
  569. [ 4.601895] gpio_request: gpio-179 (lineout_int) status -16
  570. [ 4.602029] HEADSET: Config Headset Button detection gpio
  571. [ 4.602102] gpio_request: gpio-186 (btn_INT) status -16
  572. [ 4.602232] HEADSET: Config uart<->headphone gpio
  573. [ 4.602303] HEADSET: Config Jack-in detection gpio
  574. [ 4.602375] HEADSET: Turn on micbias power
  575. [ 4.602511] Wake12 for irq=402
  576. [ 4.602636] Wake12 for irq=402
  577. [ 4.602708] Enabling wake12
  578. [ 4.602839] gpio bank wake found: wake12 for irq=119
  579. [ 4.602910] Enabling wake12
  580. [ 4.621862] HEADSET: Turn off micbias power
  581. [ 4.622008] headset_init- #####
  582. [ 4.622080] ALSA device list:
  583. [ 4.622151] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
  584. [ 4.622278] #1: tegra-rt5640
  585. [ 4.622574] oprofile: using arm/armv7-ca9
  586. [ 4.622779] GACT probability NOT on
  587. [ 4.622917] Mirror/redirect action on
  588. [ 4.622989] u32 classifier
  589. [ 4.623058] Actions configured
  590. [ 4.623131] Netfilter messages via NETLINK v0.30.
  591. [ 4.623307] nf_conntrack version 0.5.0 (15530 buckets, 62120 max)
  592. [ 4.623639] ctnetlink v0.93: registering with nfnetlink.
  593. [ 4.623813] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  594. [ 4.623887] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  595. [ 4.623937] smb347_charger: [smb347_config_thermal_charging] temp=35
  596. [ 4.624429] xt_time: kernel timezone is -0000
  597. [ 4.624444] smb347_charger: [smb347_config_thermal_charging] Bypass charger enable
  598. [ 4.624837] ip_tables: (C) 2000-2006 Netfilter Core Team
  599. [ 4.625131] arp_tables: (C) 2002 David S. Miller
  600. [ 4.625247] TCP cubic registered
  601. [ 4.625512] NET: Registered protocol family 10
  602. [ 4.626224] Mobile IPv6
  603. [ 4.626320] ip6_tables: (C) 2000-2006 Netfilter Core Team
  604. [ 4.626608] IPv6 over IPv4 tunneling driver
  605. [ 4.627449] NET: Registered protocol family 17
  606. [ 4.627599] NET: Registered protocol family 15
  607. [ 4.627753] Bridge firewalling registered
  608. [ 4.627968] Bluetooth: RFCOMM TTY layer initialized
  609. [ 4.628107] Bluetooth: RFCOMM socket layer initialized
  610. [ 4.628179] Bluetooth: RFCOMM ver 1.11
  611. [ 4.628252] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  612. [ 4.628384] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  613. [ 4.628580] NET: Registered protocol family 37
  614. [ 4.628711] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  615. [ 4.628934] Registering SWP/SWPB emulation handler
  616. [ 4.636728] Do not disable PWM clock when kernel inits
  617. [ 4.636816] Disabling clocks left on by bootloader:
  618. [ 4.636949] fuse_burn
  619. [ 4.637025] cclk_lp
  620. [ 4.637098] pll_x_out0
  621. [ 4.637226] pll_d2_out0
  622. [ 4.637297] pll_d_out0
  623. [ 4.637368] pll_p_out2
  624. [ 4.637443] pll_c_out1
  625. [ 4.637516] pll_m_out1
  626. [ 4.637744] CPU rate: 1000 MHz
  627. [ 4.638579] tegra3_dvfs: minimum cap.cbus rate 228000000 requires 1000 mV
  628. [ 4.638778] tegra dvfs: tegra sysfs cap interface is initialized
  629. [ 4.639108] tegra_actmon.emc: Completed initialization (0)
  630. [ 4.639369] tegra_actmon.avp: Completed initialization (0)
  631. [ 4.640889] ## wifi_probe
  632. [ 4.640967] wifi_set_power = 1
  633. [ 4.641096] Powering on wifi
  634. [ 4.941471] wifi_set_carddetect = 1
  635.  
  636. [ 4.942789] Dongle Host Driver, version 5.90.195.114
  637. [ 4.942792] Compiled in drivers/net/wireless/bcmdhd on May 31 2016 at 03:47:13
  638. [ 4.995882] mmc1: new high speed SDIO card at address 0001
  639. [ 4.996706] F1 signature read @0x18000000=0x16044330
  640. [ 5.000233] DHD: dongle ram size is set to 294912(orig 294912)
  641. [ 5.000885] wl_create_event_handler thr:63 started
  642. [ 5.001580] p2p0: P2P Interface Registered
  643. [ 5.001791] dhd_attach thr:64 started
  644. [ 5.002009] dhd_attach thr:65 started
  645. [ 5.002146] dhd_attach thr:66 started
  646. [ 5.002270] dhd_attach thr:67 started
  647. [ 5.002937] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
  648. [ 5.003031] [mmc]:mmc_rescan_try_freq:1917 mmc1: sdio completed
  649. [ 5.003120] wifi_set_power = 0
  650. [ 5.003191] Powering off wifi
  651. [ 5.303627] =========== WLAN placed in RESET ========
  652. [ 5.303790] Wake24 for irq=392
  653. [ 5.304125] input: gpio-keys as /devices/platform/gpio-keys.0/input/input2
  654. [ 5.306830] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:49:53
  655. [ 5.306926] rtc_tps6591x rtc_tps6591x.0: setting system clock to 2016-06-03 08:49:53 UTC (1464943793)
  656. [ 5.307217] Warning: unable to open an initial console.
  657. [ 5.307526] Freeing init memory: 288K
  658. [ 7.725954] EXT3-fs (mmcblk0p9): error: couldn't mount because of unsupported optional features (40)
  659. [ 7.772351] EXT2-fs (mmcblk0p9): error: couldn't mount because of unsupported optional features (40)
  660. [ 7.893573] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
  661. [ 7.982041] android_usb: already disabled
  662. [ 8.290118] android_work: did not send uevent (0 0 (null))
  663. [ 8.360688] android_work: sent uevent USB_STATE=CONNECTED
  664. [ 8.365409] android_work: sent uevent USB_STATE=DISCONNECTED
  665. [ 8.452611] android_work: sent uevent USB_STATE=CONNECTED
  666. [ 8.457452] android_work: sent uevent USB_STATE=DISCONNECTED
  667. [ 8.485423] rndis_function_bind_config MAC: 00:00:00:00:00:00
  668. [ 8.485611] android_usb gadget: using random self ethernet address
  669. [ 8.485691] android_usb gadget: using random host ethernet address
  670. [ 8.487284] rndis0: MAC 66:eb:7c:4f:87:94
  671. [ 8.487387] rndis0: HOST MAC 52:de:47:f9:b5:0e
  672. [ 8.489541] ADDRCONF(NETDEV_UP): rndis0: link is not ready
  673. [ 8.542449] android_work: did not send uevent (0 0 (null))
  674. [ 8.802090] android_work: did not send uevent (0 0 (null))
  675. [ 8.872679] android_work: sent uevent USB_STATE=CONNECTED
  676. [ 8.877475] android_work: sent uevent USB_STATE=DISCONNECTED
  677. [ 8.964609] android_work: sent uevent USB_STATE=CONNECTED
  678. [ 8.978332] set_config : usb set config wake lock ++
  679. [ 8.978469] android_usb gadget: high speed config #1: android
  680. [ 8.979060] ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  681. [ 8.979590] android_work: sent uevent USB_STATE=CONFIGURED
  682. [ 8.981877] cable_detection_work_handler(): vbus_active = 0 and is_active = 1
  683. [ 8.982011] The USB cable is connected
  684. [ 8.982084] smb347_charger: [usb_det_cable_callback] usb_det_cable_type=1
  685. [ 8.982220] elan-ktf3k 1-0010: Update power source to 1
  686. [ 9.525739] reset_config : usb reset config wake unlock --
  687. [ 9.642406] rndis_function_bind_config MAC: 52:DE:47:F9:B5:0E
  688. [ 9.642530] android_usb gadget: using random self ethernet address
  689. [ 9.642669] android_usb gadget: using random host ethernet address
  690. [ 9.646464] rndis0: MAC ce:a1:a4:52:6b:c7
  691. [ 9.646542] rndis0: HOST MAC c6:03:01:d0:b4:0d
  692. [ 9.854345] android_work: sent uevent USB_STATE=DISCONNECTED
  693. [ 9.924623] android_work: sent uevent USB_STATE=CONNECTED
  694. [ 9.929398] android_work: sent uevent USB_STATE=DISCONNECTED
  695. [ 10.016628] android_work: sent uevent USB_STATE=CONNECTED
  696. [ 10.030324] set_config : usb set config wake lock ++
  697. [ 10.030462] android_usb gadget: high speed config #1: android
  698. [ 10.030846] android_work: sent uevent USB_STATE=CONFIGURED
  699. [ 10.148252] reset_config : usb reset config wake unlock --
  700. [ 10.233240] rndis_function_bind_config MAC: C6:03:01:D0:B4:0D
  701. [ 10.233417] android_usb gadget: using random self ethernet address
  702. [ 10.233499] android_usb gadget: using random host ethernet address
  703. [ 10.235025] rndis0: MAC 3e:3f:61:69:99:c9
  704. [ 10.235125] rndis0: HOST MAC 92:f2:66:eb:5f:23
  705. [ 10.370132] android_work: sent uevent USB_STATE=DISCONNECTED
  706. [ 10.532448] rndis_function_bind_config MAC: 92:F2:66:EB:5F:23
  707. [ 10.532572] android_usb gadget: using random self ethernet address
  708. [ 10.532712] android_usb gadget: using random host ethernet address
  709. [ 10.533259] rndis0: MAC 6e:d5:f2:50:43:17
  710. [ 10.533335] rndis0: HOST MAC 46:42:a3:ec:c1:83
  711. [ 10.583727] rndis_function_bind_config MAC: 46:42:A3:EC:C1:83
  712. [ 10.583910] android_usb gadget: using random self ethernet address
  713. [ 10.583991] android_usb gadget: using random host ethernet address
  714. [ 10.584503] rndis0: MAC 5a:af:5d:35:4a:75
  715. [ 10.584580] rndis0: HOST MAC ca:bc:4c:df:a2:5c
  716. [ 10.590737] ADDRCONF(NETDEV_UP): rndis0: link is not ready
  717. [ 10.726115] android_work: did not send uevent (0 0 (null))
  718. [ 10.796384] android_work: sent uevent USB_STATE=CONNECTED
  719. [ 10.801184] android_work: sent uevent USB_STATE=DISCONNECTED
  720. [ 10.888358] android_work: sent uevent USB_STATE=CONNECTED
  721. [ 10.902320] set_config : usb set config wake lock ++
  722. [ 10.902457] android_usb gadget: high speed config #1: android
  723. [ 10.903054] ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  724. [ 10.903351] android_work: sent uevent USB_STATE=CONFIGURED
  725. [ 10.906316] notify/0 --> -22
  726. [ 10.910315] notify/0 --> -22
  727. [ 10.914313] notify/0 --> -22
  728. [ 10.918313] notify/0 --> -22
  729. [ 11.814817] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
  730. [ 13.511994] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ)
  731. [ 13.513469] systemd[1]: Set hostname to <Jolla>.
  732. [ 13.622389] systemd[1]: usb-moded.service has a D-Bus service name specified, but is not of type dbus. Ignoring.
  733. [ 13.644209] systemd[1]: sensorfwd.service has a D-Bus service name specified, but is not of type dbus. Ignoring.
  734. [ 13.669229] systemd[1]: Cannot create mount unit for API file system /sys/fs/pstore. Refusing.
  735. [ 13.670068] systemd[1]: Cannot create mount unit for API file system /sys/fs/cgroup/bfqio. Refusing.
  736. [ 13.674119] systemd[1]: Cannot add dependency job for unit sys-fs-cgroup-bfqio.mount, ignoring: Unit sys-fs-cgroup-bfqio.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-cgroup-bfqio.mount' for details.
  737. [ 13.674357] systemd[1]: Cannot add dependency job for unit sys-fs-pstore.mount, ignoring: Unit sys-fs-pstore.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-pstore.mount' for details.
  738. [ 13.675944] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  739. [ 13.676337] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  740. [ 13.676471] systemd[1]: Starting Login Prompts.
  741. [ 13.676663] systemd[1]: Reached target Login Prompts.
  742. [ 13.676780] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  743. [ 13.677029] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  744. [ 13.677145] systemd[1]: Starting Delayed Shutdown Socket.
  745. [ 13.677384] systemd[1]: Listening on Delayed Shutdown Socket.
  746. [ 13.677519] systemd[1]: Starting udev Kernel Socket.
  747. [ 13.677753] systemd[1]: Listening on udev Kernel Socket.
  748. [ 13.677882] systemd[1]: Starting udev Control Socket.
  749. [ 13.678129] systemd[1]: Listening on udev Control Socket.
  750. [ 13.678263] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  751. [ 13.678548] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  752. [ 13.678752] systemd[1]: Starting Collect Read-Ahead Data...
  753. [ 13.681169] systemd[1]: Starting Replay Read-Ahead Data...
  754. [ 13.683435] systemd[1]: Starting Journal Socket.
  755. [ 13.684084] systemd[1]: Listening on Journal Socket.
  756. [ 13.684938] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  757. [ 13.687365] systemd[1]: Mounting Debug File System...
  758. [ 13.689494] systemd[1]: Starting udev Coldplug all Devices...
  759. [ 13.692568] systemd[1]: Mounted POSIX Message Queue File System.
  760. [ 13.692989] systemd[1]: Mounted Huge Pages File System.
  761. [ 13.693211] systemd[1]: Starting Journal Service...
  762. [ 13.696211] systemd[1]: Started Journal Service.
  763. [ 13.697563] systemd-readahead[429]: Bumped block_nr parameter of 179:0 to 20480. This is a temporary hack and should be removed one day.
  764. [ 13.737343] systemd-journald[433]: Vacuuming done, freed 0 bytes
  765. [ 13.904723] bq27541_get_psp status: Charging ret= 0x0101
  766. [ 13.905384] bq27541_get_psp voltage_now= 3766000 uV
  767. [ 13.910095] bq27541_get_capacity = 50% ret= 53
  768. [ 13.911414] bq27541_get_psp temperature= 350 (0.1\xffffffa2XC)
  769. [ 13.913386] bq27541_get_psp current = -346 mA
  770. [ 14.067471] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
  771. [ 15.284144] systemd-udevd[452]: starting version 208
  772. [ 15.561327] bq27541_get_psp status: Charging ret= 0x0101
  773. [ 15.562405] bq27541_get_psp voltage_now= 3761000 uV
  774. [ 15.563145] bq27541_get_capacity = 50% ret= 53
  775. [ 15.563783] bq27541_get_psp temperature= 350 (0.1\xffffffa2XC)
  776. [ 15.565322] bq27541_get_psp current = -501 mA
  777. [ 15.566320] bq27541_get_psp status: Charging ret= 0x0101
  778. [ 15.567132] bq27541_get_psp voltage_now= 3761000 uV
  779. [ 15.568043] bq27541_get_capacity = 50% ret= 53
  780. [ 15.568913] bq27541_get_psp temperature= 350 (0.1\xffffffa2XC)
  781. [ 15.570614] bq27541_get_psp current = -501 mA
  782. [ 15.571995] bq27541_get_psp status: Charging ret= 0x0101
  783. [ 15.578956] bq27541_get_psp voltage_now= 3761000 uV
  784. [ 15.579887] bq27541_get_capacity = 50% ret= 53
  785. [ 15.581195] bq27541_get_psp temperature= 350 (0.1\xffffffa2XC)
  786. [ 15.582592] bq27541_get_psp current = -501 mA
  787. [ 17.342219] mmcblk0: error -110 transferring data, sector 36844864, nr 8, cmd response 0x900, card status 0xb00
  788. [ 17.342360] mmcblk0: retrying using single block read
  789. [ 17.574921] systemd-journald[433]: Received request to flush runtime journal from PID 1
  790. [ 17.583459] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:5
  791. [ 17.586112] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:5
  792. [ 17.588518] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:5
  793. [ 17.588657] tps6591x 4-002d:
  794. [ 17.588660] setting alarm to requested time::
  795. [ 17.588857] tps6591x 4-002d: RTC Time : 6/3/2016 8:50:6
  796. [ 17.591195] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:5
  797. [ 17.730916] reset_config : usb reset config wake unlock --
  798. [ 17.802161] rndis_function_bind_config MAC: CA:BC:4C:DF:A2:5C
  799. [ 17.802364] android_usb gadget: using random self ethernet address
  800. [ 17.802446] android_usb gadget: using random host ethernet address
  801. [ 17.803120] rndis0: MAC 3a:0e:ba:d3:8b:70
  802. [ 17.803201] rndis0: HOST MAC ae:fd:c9:d5:bf:72
  803. [ 17.831293] ADDRCONF(NETDEV_UP): rndis0: link is not ready
  804. [ 18.038084] android_work: sent uevent USB_STATE=DISCONNECTED
  805. [ 18.046862] iio-buffer, current state requested again
  806. [ 18.082840] iio-buffer, current state requested again
  807. [ 18.108343] android_work: sent uevent USB_STATE=CONNECTED
  808. [ 18.112191] android_work: sent uevent USB_STATE=DISCONNECTED
  809. [ 18.203032] android_work: sent uevent USB_STATE=CONNECTED
  810. [ 18.213270] set_config : usb set config wake lock ++
  811. [ 18.213355] android_usb gadget: high speed config #1: android
  812. [ 18.214073] ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  813. [ 18.214371] android_work: sent uevent USB_STATE=CONFIGURED
  814. [ 18.217881] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:6
  815. [ 18.220251] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:6
  816. [ 18.220386] tps6591x 4-002d:
  817. [ 18.220389] setting alarm to requested time::
  818. [ 18.220527] tps6591x 4-002d: RTC Time : 6/3/2016 8:50:7
  819. [ 18.223373] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:6
  820. [ 18.440643] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:6
  821. [ 18.626024] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:6
  822. [ 18.680858] iio-buffer, current state requested again
  823. [ 18.681252] iio-buffer, current state requested again
  824. [ 18.709786] al3010 debug log : light sensor chip is resumed
  825. [ 18.711527] iio-buffer, current state requested again
  826. [ 19.217673] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:7
  827. [ 19.222233] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:7
  828. [ 19.222361] tps6591x 4-002d:
  829. [ 19.222369] setting alarm to requested time::
  830. [ 19.222705] tps6591x 4-002d: RTC Time : 6/3/2016 8:50:8
  831. [ 19.226170] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:7
  832. [ 19.420858] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:7
  833. [ 20.217655] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:8
  834. [ 20.220546] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:8
  835. [ 20.220684] tps6591x 4-002d:
  836. [ 20.220687] setting alarm to requested time::
  837. [ 20.220826] tps6591x 4-002d: RTC Time : 6/3/2016 8:50:9
  838. [ 20.223229] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:8
  839. [ 20.420743] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:8
  840. [ 21.217593] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:9
  841. [ 21.220794] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:9
  842. [ 21.220874] tps6591x 4-002d:
  843. [ 21.220877] setting alarm to requested time::
  844. [ 21.221077] tps6591x 4-002d: RTC Time : 6/3/2016 8:50:10
  845. [ 21.223416] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:9
  846. [ 21.420564] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:9
  847. [ 21.932726] widget AIF3RX AIF3 Playback
  848. [ 21.932935] widget AIF3TX AIF3 Capture
  849. [ 22.141326] bq27541_get_psp current = -618 mA
  850. [ 22.142061] bq27541_get_psp voltage_now= 3755000 uV
  851. [ 22.142921] bq27541_get_capacity = 50% ret= 53
  852. [ 22.143740] bq27541_get_psp temperature= 350 (0.1\xffffffa2XC)
  853. [ 22.144531] bq27541_get_psp status: Charging ret= 0x0101
  854. [ 22.220630] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:10
  855. [ 22.223669] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:10
  856. [ 22.223762] tps6591x 4-002d:
  857. [ 22.223765] setting alarm to requested time::
  858. [ 22.223908] tps6591x 4-002d: RTC Time : 6/3/2016 8:50:11
  859. [ 22.231594] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:10
  860. [ 22.236807] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:10
  861. [ 22.236899] tps6591x 4-002d:
  862. [ 22.236902] setting alarm to requested time::
  863. [ 22.237101] tps6591x 4-002d: RTC Time : 6/3/2016 8:50:51
  864. [ 22.239552] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:10
  865. [ 22.444167] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:10
  866. [ 25.025574] reset_config : usb reset config wake unlock --
  867. [ 26.392122] rndis_function_bind_config MAC: AE:FD:C9:D5:BF:72
  868. [ 26.392321] android_usb gadget: using random self ethernet address
  869. [ 26.392403] android_usb gadget: using random host ethernet address
  870. [ 26.393320] rndis0: MAC 9a:74:9f:bd:2e:f2
  871. [ 26.393403] rndis0: HOST MAC 92:ce:a0:a8:67:9e
  872. [ 26.396411] ADDRCONF(NETDEV_UP): rndis0: link is not ready
  873. [ 26.429149] ADDRCONF(NETDEV_UP): rndis0: link is not ready
  874. [ 26.722020] android_work: sent uevent USB_STATE=DISCONNECTED
  875. [ 26.792435] android_work: sent uevent USB_STATE=CONNECTED
  876. [ 26.796104] android_work: sent uevent USB_STATE=DISCONNECTED
  877. [ 26.888389] android_work: sent uevent USB_STATE=CONNECTED
  878. [ 26.902210] set_config : usb set config wake lock ++
  879. [ 26.902356] android_usb gadget: high speed config #1: android
  880. [ 26.902984] ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  881. [ 26.903358] android_work: sent uevent USB_STATE=CONFIGURED
  882. [ 26.906211] notify/0 --> -22
  883. [ 26.910208] notify/0 --> -22
  884. [ 26.914207] notify/0 --> -22
  885. [ 26.918205] notify/0 --> -22
  886. [ 27.151587] bq27541_get_capacity = 50% ret= 53
  887. [ 27.153194] bq27541_get_psp current = -610 mA
  888. [ 27.153955] bq27541_get_psp voltage_now= 3754000 uV
  889. [ 27.155333] bq27541_get_psp temperature= 350 (0.1\xffffffa2XC)
  890. [ 27.156409] bq27541_get_psp status: Charging ret= 0x0101
  891. [ 29.528742] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:17
  892. [ 31.729971] reset_config : usb reset config wake unlock --
  893. [ 33.162066] rndis_function_bind_config MAC: 92:CE:A0:A8:67:9E
  894. [ 33.162194] android_usb gadget: using random self ethernet address
  895. [ 33.162332] android_usb gadget: using random host ethernet address
  896. [ 33.162961] rndis0: MAC c2:06:8d:0a:90:12
  897. [ 33.163130] rndis0: HOST MAC d2:37:94:47:8f:71
  898. [ 33.165000] ADDRCONF(NETDEV_UP): rndis0: link is not ready
  899. [ 33.189490] ADDRCONF(NETDEV_UP): rndis0: link is not ready
  900. [ 33.377441] android_work: sent uevent USB_STATE=DISCONNECTED
  901. [ 33.447690] android_work: sent uevent USB_STATE=CONNECTED
  902. [ 33.452372] android_work: sent uevent USB_STATE=DISCONNECTED
  903. [ 33.539690] android_work: sent uevent USB_STATE=CONNECTED
  904. [ 33.552542] set_config : usb set config wake lock ++
  905. [ 33.552637] android_usb gadget: high speed config #1: android
  906. [ 33.553551] ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  907. [ 33.553814] android_work: sent uevent USB_STATE=CONFIGURED
  908. [ 33.556526] notify/0 --> -22
  909. [ 33.560524] notify/0 --> -22
  910. [ 33.564524] notify/0 --> -22
  911. [ 33.568526] notify/0 --> -22
  912. [ 37.163119] bq27541_get_capacity = 50% ret= 53
  913. [ 37.164375] bq27541_get_psp current = -505 mA
  914. [ 37.165124] bq27541_get_psp voltage_now= 3759000 uV
  915. [ 37.165815] bq27541_get_psp temperature= 350 (0.1\xffffffa2XC)
  916. [ 37.166510] bq27541_get_psp status: Charging ret= 0x0101
  917. [ 41.528775] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:29
  918. [ 41.602904] reset_config : usb reset config wake unlock --
  919. [ 41.932090] rndis_function_bind_config MAC: D2:37:94:47:8F:71
  920. [ 41.932229] android_usb gadget: using random self ethernet address
  921. [ 41.932369] android_usb gadget: using random host ethernet address
  922. [ 41.933097] rndis0: MAC 52:a1:d6:d2:62:53
  923. [ 41.933186] rndis0: HOST MAC c6:80:b2:72:c3:42
  924. [ 41.935020] ADDRCONF(NETDEV_UP): rndis0: link is not ready
  925. [ 41.964195] ADDRCONF(NETDEV_UP): rndis0: link is not ready
  926. [ 42.081887] shutdown_enable_set bq27541_device->shutdown_disable = 0
  927. [ 42.084312] android_work: sent uevent USB_STATE=DISCONNECTED
  928. [ 42.154609] android_work: sent uevent USB_STATE=CONNECTED
  929. [ 42.158259] android_work: sent uevent USB_STATE=DISCONNECTED
  930. [ 42.246593] android_work: sent uevent USB_STATE=CONNECTED
  931. [ 42.259468] set_config : usb set config wake lock ++
  932. [ 42.259557] android_usb gadget: high speed config #1: android
  933. [ 42.260349] ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  934. [ 42.261110] android_work: sent uevent USB_STATE=CONFIGURED
  935. [ 42.263466] notify/0 --> -22
  936. [ 42.267467] notify/0 --> -22
  937. [ 42.271462] notify/0 --> -22
  938. [ 42.275461] notify/0 --> -22
  939. [ 47.173381] bq27541_get_capacity = 50% ret= 53
  940. [ 47.175470] bq27541_get_psp current = -602 mA
  941. [ 47.176359] bq27541_get_psp voltage_now= 3753000 uV
  942. [ 47.177051] bq27541_get_psp temperature= 350 (0.1\xffffffa2XC)
  943. [ 47.177754] bq27541_get_psp status: Charging ret= 0x0101
  944. [ 51.646144] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:39
  945. [ 51.648547] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:39
  946. [ 51.648683] tps6591x 4-002d:
  947. [ 51.648686] setting alarm to requested time::
  948. [ 51.648883] tps6591x 4-002d: RTC Time : 6/3/2016 8:51:6
  949. [ 51.651233] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:39
  950. [ 52.651852] rndis0: no IPv6 routers present
  951. [ 53.528845] rtc_tps6591x rtc_tps6591x.0: RTC Time : 6/3/2016 8:50:41
Advertisement
Add Comment
Please, Sign In to add comment