API tools faq
paste
Advertisement
Guest User

Untitled

a guest
May 2nd, 2011
227
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 62.13 KB | None | 0 0
raw download clone embed print report
  1. 7>[ 0.884746] pci 0000:00:1f.3: reg 10: [mem 0xfb624000-0xfb6240ff 64bit]
  2. [ 0.884763] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
  3. [ 0.884800] pci 0000:01:00.0: [10de:1081] type 0 class 0x000300
  4. [ 0.884806] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
  5. [ 0.884813] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff 64bit pref]
  6. [ 0.884820] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
  7. [ 0.884825] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
  8. [ 0.884830] pci 0000:01:00.0: reg 30: [mem 0xfb000000-0xfb07ffff pref]
  9. [ 0.884857] pci 0000:01:00.1: [10de:0e09] type 0 class 0x000403
  10. [ 0.884864] pci 0000:01:00.1: reg 10: [mem 0xfb080000-0xfb083fff]
  11. [ 0.886263] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  12. [ 0.886264] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
  13. [ 0.886266] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
  14. [ 0.886268] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
  15. [ 0.886304] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
  16. [ 0.886306] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
  17. [ 0.886309] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
  18. [ 0.886314] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  19. [ 0.886371] pci 0000:03:00.0: [1033:0194] type 0 class 0x000c03
  20. [ 0.886394] pci 0000:03:00.0: reg 10: [mem 0xfb500000-0xfb501fff 64bit]
  21. [ 0.886491] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
  22. [ 0.886495] pci 0000:03:00.0: PME# disabled
  23. [ 0.888264] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
  24. [ 0.888267] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
  25. [ 0.888270] pci 0000:00:1c.1: bridge window [mem 0xfb500000-0xfb5fffff]
  26. [ 0.888274] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  27. [ 0.888311] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
  28. [ 0.888313] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
  29. [ 0.888316] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
  30. [ 0.888320] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  31. [ 0.888375] pci 0000:05:00.0: [197b:2362] type 0 class 0x000101
  32. [ 0.888406] pci 0000:05:00.0: reg 10: [io 0xd040-0xd047]
  33. [ 0.888420] pci 0000:05:00.0: reg 14: [io 0xd030-0xd033]
  34. [ 0.888435] pci 0000:05:00.0: reg 18: [io 0xd020-0xd027]
  35. [ 0.888449] pci 0000:05:00.0: reg 1c: [io 0xd010-0xd013]
  36. [ 0.888463] pci 0000:05:00.0: reg 20: [io 0xd000-0xd00f]
  37. [ 0.888477] pci 0000:05:00.0: reg 24: [mem 0xfb410000-0xfb4101ff]
  38. [ 0.888524] pci 0000:05:00.0: PME# supported from D3hot
  39. [ 0.888529] pci 0000:05:00.0: PME# disabled
  40. [ 0.890261] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
  41. [ 0.890264] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
  42. [ 0.890267] pci 0000:00:1c.3: bridge window [mem 0xfb400000-0xfb4fffff]
  43. [ 0.890271] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  44. [ 0.890328] pci 0000:06:00.0: [1033:0194] type 0 class 0x000c03
  45. [ 0.890351] pci 0000:06:00.0: reg 10: [mem 0xfb300000-0xfb301fff 64bit]
  46. [ 0.890448] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
  47. [ 0.890452] pci 0000:06:00.0: PME# disabled
  48. [ 0.892259] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
  49. [ 0.892262] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
  50. [ 0.892264] pci 0000:00:1c.4: bridge window [mem 0xfb300000-0xfb3fffff]
  51. [ 0.892269] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  52. [ 0.892318] pci 0000:07:00.0: [1b21:1080] type 1 class 0x000604
  53. [ 0.892415] pci 0000:00:1c.6: PCI bridge to [bus 07-08] (subtractive decode)
  54. [ 0.892417] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
  55. [ 0.892420] pci 0000:00:1c.6: bridge window [mem 0xfb200000-0xfb2fffff]
  56. [ 0.892424] pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  57. [ 0.892425] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7] (subtractive decode)
  58. [ 0.892426] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff] (subtractive decode)
  59. [ 0.892427] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  60. [ 0.892428] pci 0000:00:1c.6: bridge window [mem 0x000c8000-0x000dffff] (subtractive decode)
  61. [ 0.892429] pci 0000:00:1c.6: bridge window [mem 0xe4000000-0xffffffff] (subtractive decode)
  62. [ 0.892490] pci 0000:08:02.0: [10ec:8167] type 0 class 0x000200
  63. [ 0.892522] pci 0000:08:02.0: reg 10: [io 0xc000-0xc0ff]
  64. [ 0.892537] pci 0000:08:02.0: reg 14: [mem 0xfb221000-0xfb2210ff]
  65. [ 0.892611] pci 0000:08:02.0: reg 30: [mem 0xfb200000-0xfb21ffff pref]
  66. [ 0.892649] pci 0000:08:02.0: supports D1 D2
  67. [ 0.892650] pci 0000:08:02.0: PME# supported from D1 D2 D3hot D3cold
  68. [ 0.892655] pci 0000:08:02.0: PME# disabled
  69. [ 0.892682] pci 0000:08:03.0: [1106:3044] type 0 class 0x000c00
  70. [ 0.892711] pci 0000:08:03.0: reg 10: [mem 0xfb220000-0xfb2207ff]
  71. [ 0.892727] pci 0000:08:03.0: reg 14: [io 0xc100-0xc17f]
  72. [ 0.892833] pci 0000:08:03.0: supports D2
  73. [ 0.892833] pci 0000:08:03.0: PME# supported from D2 D3hot D3cold
  74. [ 0.892838] pci 0000:08:03.0: PME# disabled
  75. [ 0.892908] pci 0000:07:00.0: PCI bridge to [bus 08-08] (subtractive decode)
  76. [ 0.892916] pci 0000:07:00.0: bridge window [io 0xc000-0xcfff]
  77. [ 0.892921] pci 0000:07:00.0: bridge window [mem 0xfb200000-0xfb2fffff]
  78. [ 0.892929] pci 0000:07:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  79. [ 0.892930] pci 0000:07:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode)
  80. [ 0.892931] pci 0000:07:00.0: bridge window [mem 0xfb200000-0xfb2fffff] (subtractive decode)
  81. [ 0.892932] pci 0000:07:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
  82. [ 0.892933] pci 0000:07:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
  83. [ 0.892934] pci 0000:07:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
  84. [ 0.892935] pci 0000:07:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
  85. [ 0.892936] pci 0000:07:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  86. [ 0.892937] pci 0000:07:00.0: bridge window [mem 0x000c8000-0x000dffff] (subtractive decode)
  87. [ 0.892938] pci 0000:07:00.0: bridge window [mem 0xe4000000-0xffffffff] (subtractive decode)
  88. [ 0.892999] pci 0000:09:00.0: [1b4b:9120] type 0 class 0x000106
  89. [ 0.893014] pci 0000:09:00.0: reg 10: [io 0xb090-0xb097]
  90. [ 0.893025] pci 0000:09:00.0: reg 14: [io 0xb080-0xb083]
  91. [ 0.893035] pci 0000:09:00.0: reg 18: [io 0xb070-0xb077]
  92. [ 0.893046] pci 0000:09:00.0: reg 1c: [io 0xb060-0xb063]
  93. [ 0.893057] pci 0000:09:00.0: reg 20: [io 0xb050-0xb05f]
  94. [ 0.893068] pci 0000:09:00.0: reg 24: [mem 0xfb115000-0xfb1157ff]
  95. [ 0.893079] pci 0000:09:00.0: reg 30: [mem 0xfb100000-0xfb10ffff pref]
  96. [ 0.893110] pci 0000:09:00.0: PME# supported from D3hot
  97. [ 0.893114] pci 0000:09:00.0: PME# disabled
  98. [ 0.894254] pci 0000:00:1c.7: PCI bridge to [bus 09-09]
  99. [ 0.894257] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
  100. [ 0.894259] pci 0000:00:1c.7: bridge window [mem 0xfb100000-0xfb1fffff]
  101. [ 0.894264] pci 0000:00:1c.7: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  102. [ 0.894292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  103. [ 0.894337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  104. [ 0.894351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
  105. [ 0.894363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
  106. [ 0.894375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
  107. [ 0.894387] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
  108. [ 0.894407] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
  109. [ 0.894420] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
  110. [ 0.894433] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.BR24._PRT]
  111. [ 0.894457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
  112. [ 0.896657] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  113. [ 0.896678] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  114. [ 0.896698] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
  115. [ 0.896717] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
  116. [ 0.896737] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  117. [ 0.896756] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  118. [ 0.896777] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  119. [ 0.896796] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
  120. [ 0.896844] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  121. [ 0.896847] vgaarb: loaded
  122. [ 0.896895] SCSI subsystem initialized
  123. [ 0.896930] libata version 3.00 loaded.
  124. [ 0.896982] usbcore: registered new interface driver usbfs
  125. [ 0.896995] usbcore: registered new interface driver hub
  126. [ 0.897011] usbcore: registered new device driver usb
  127. [ 0.897094] Advanced Linux Sound Architecture Driver Version 1.0.23.
  128. [ 0.897105] PCI: Using ACPI for IRQ routing
  129. [ 0.897106] PCI: pci_cache_line_size set to 64 bytes
  130. [ 0.897176] reserve RAM buffer: 000000000009d800 - 000000000009ffff
  131. [ 0.897177] reserve RAM buffer: 00000000defcd000 - 00000000dfffffff
  132. [ 0.897178] reserve RAM buffer: 00000000df5cc000 - 00000000dfffffff
  133. [ 0.897179] reserve RAM buffer: 00000000df800000 - 00000000dfffffff
  134. [ 0.897180] reserve RAM buffer: 000000021f800000 - 000000021fffffff
  135. [ 0.897250] Bluetooth: Core ver 2.15
  136. [ 0.897262] NET: Registered protocol family 31
  137. [ 0.897263] Bluetooth: HCI device and connection manager initialized
  138. [ 0.897264] Bluetooth: HCI socket layer initialized
  139. [ 0.897295] cfg80211: Calling CRDA to update world regulatory domain
  140. [ 0.897385] NetLabel: Initializing
  141. [ 0.897387] NetLabel: domain hash size = 128
  142. [ 0.897387] NetLabel: protocols = UNLABELED CIPSOv4
  143. [ 0.897398] NetLabel: unlabeled traffic allowed by default
  144. [ 0.897437] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  145. [ 0.897440] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  146. [ 0.899451] Switching to clocksource hpet
  147. [ 0.900241] Switched to NOHz mode on CPU #0
  148. [ 0.900278] Switched to NOHz mode on CPU #1
  149. [ 0.900284] Switched to NOHz mode on CPU #2
  150. [ 0.900291] Switched to NOHz mode on CPU #3
  151. [ 0.900327] Switched to NOHz mode on CPU #4
  152. [ 0.900334] Switched to NOHz mode on CPU #5
  153. [ 0.900339] Switched to NOHz mode on CPU #6
  154. [ 0.900349] Switched to NOHz mode on CPU #7
  155. [ 0.900945] pnp: PnP ACPI init
  156. [ 0.900949] ACPI: bus type pnp registered
  157. [ 0.901012] pnp 00:00: [bus 00-ff]
  158. [ 0.901013] pnp 00:00: [io 0x0cf8-0x0cff]
  159. [ 0.901014] pnp 00:00: [io 0x0000-0x0cf7 window]
  160. [ 0.901015] pnp 00:00: [io 0x0d00-0xffff window]
  161. [ 0.901016] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  162. [ 0.901017] pnp 00:00: [mem 0x000c8000-0x000dffff window]
  163. [ 0.901018] pnp 00:00: [mem 0xe4000000-0xffffffff window]
  164. [ 0.901019] pnp 00:00: [mem 0x00000000 window]
  165. [ 0.901053] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
  166. [ 0.901080] pnp 00:01: [mem 0xfed10000-0xfed19fff]
  167. [ 0.901081] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
  168. [ 0.901081] pnp 00:01: [mem 0xfed90000-0xfed93fff]
  169. [ 0.901082] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
  170. [ 0.901083] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
  171. [ 0.901112] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
  172. [ 0.901114] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
  173. [ 0.901115] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
  174. [ 0.901116] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
  175. [ 0.901117] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
  176. [ 0.901118] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
  177. [ 0.901149] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
  178. [ 0.901150] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
  179. [ 0.901151] pnp 00:02: [io 0x0290-0x029f]
  180. [ 0.901152] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
  181. [ 0.901182] system 00:02: [io 0x0290-0x029f] has been reserved
  182. [ 0.901184] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
  183. [ 0.901190] pnp 00:03: [dma 4]
  184. [ 0.901191] pnp 00:03: [io 0x0000-0x000f]
  185. [ 0.901191] pnp 00:03: [io 0x0081-0x0083]
  186. [ 0.901192] pnp 00:03: [io 0x0087]
  187. [ 0.901193] pnp 00:03: [io 0x0089-0x008b]
  188. [ 0.901193] pnp 00:03: [io 0x008f]
  189. [ 0.901194] pnp 00:03: [io 0x00c0-0x00df]
  190. [ 0.901215] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
  191. [ 0.901220] pnp 00:04: [io 0x0070-0x0071]
  192. [ 0.901224] pnp 00:04: [irq 8]
  193. [ 0.901245] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
  194. [ 0.901249] pnp 00:05: [io 0x0061]
  195. [ 0.901269] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
  196. [ 0.901276] pnp 00:06: [io 0x0010-0x001f]
  197. [ 0.901277] pnp 00:06: [io 0x0022-0x003f]
  198. [ 0.901278] pnp 00:06: [io 0x0044-0x005f]
  199. [ 0.901279] pnp 00:06: [io 0x0063]
  200. [ 0.901280] pnp 00:06: [io 0x0065]
  201. [ 0.901280] pnp 00:06: [io 0x0067-0x006f]
  202. [ 0.901281] pnp 00:06: [io 0x0072-0x007f]
  203. [ 0.901282] pnp 00:06: [io 0x0080]
  204. [ 0.901282] pnp 00:06: [io 0x0084-0x0086]
  205. [ 0.901283] pnp 00:06: [io 0x0088]
  206. [ 0.901284] pnp 00:06: [io 0x008c-0x008e]
  207. [ 0.901285] pnp 00:06: [io 0x0090-0x009f]
  208. [ 0.901285] pnp 00:06: [io 0x00a2-0x00bf]
  209. [ 0.901286] pnp 00:06: [io 0x00e0-0x00ef]
  210. [ 0.901287] pnp 00:06: [io 0x04d0-0x04d1]
  211. [ 0.901322] system 00:06: [io 0x04d0-0x04d1] has been reserved
  212. [ 0.901323] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
  213. [ 0.901327] pnp 00:07: [io 0x00f0-0x00ff]
  214. [ 0.901330] pnp 00:07: [irq 13]
  215. [ 0.901353] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
  216. [ 0.901480] pnp 00:08: [io 0x03f8-0x03ff]
  217. [ 0.901483] pnp 00:08: [irq 4]
  218. [ 0.901484] pnp 00:08: [dma 0 disabled]
  219. [ 0.901517] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
  220. [ 0.901586] pnp 00:09: [io 0x0400-0x0453]
  221. [ 0.901587] pnp 00:09: [io 0x0458-0x047f]
  222. [ 0.901588] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
  223. [ 0.901589] pnp 00:09: [io 0x0500-0x057f]
  224. [ 0.901590] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
  225. [ 0.901591] pnp 00:09: [mem 0xfec00000-0xfecfffff]
  226. [ 0.901591] pnp 00:09: [mem 0xfed08000-0xfed08fff]
  227. [ 0.901592] pnp 00:09: [mem 0xff000000-0xffffffff]
  228. [ 0.901625] system 00:09: [io 0x0400-0x0453] has been reserved
  229. [ 0.901626] system 00:09: [io 0x0458-0x047f] has been reserved
  230. [ 0.901627] system 00:09: [io 0x0500-0x057f] has been reserved
  231. [ 0.901628] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
  232. [ 0.901629] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
  233. [ 0.901630] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
  234. [ 0.901632] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
  235. [ 0.901633] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
  236. [ 0.901651] pnp 00:0a: [io 0x0454-0x0457]
  237. [ 0.901681] system 00:0a: [io 0x0454-0x0457] has been reserved
  238. [ 0.901683] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
  239. [ 0.901739] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
  240. [ 0.901768] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
  241. [ 0.901831] pnp: PnP ACPI: found 12 devices
  242. [ 0.901832] ACPI: ACPI bus type pnp unregistered
  243. [ 0.906431] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  244. [ 0.906432] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
  245. [ 0.906434] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
  246. [ 0.906435] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
  247. [ 0.906437] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
  248. [ 0.906438] pci 0000:00:1c.0: bridge window [io disabled]
  249. [ 0.906441] pci 0000:00:1c.0: bridge window [mem disabled]
  250. [ 0.906444] pci 0000:00:1c.0: bridge window [mem pref disabled]
  251. [ 0.906448] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
  252. [ 0.906449] pci 0000:00:1c.1: bridge window [io disabled]
  253. [ 0.906452] pci 0000:00:1c.1: bridge window [mem 0xfb500000-0xfb5fffff]
  254. [ 0.906455] pci 0000:00:1c.1: bridge window [mem pref disabled]
  255. [ 0.906459] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
  256. [ 0.906460] pci 0000:00:1c.2: bridge window [io disabled]
  257. [ 0.906463] pci 0000:00:1c.2: bridge window [mem disabled]
  258. [ 0.906466] pci 0000:00:1c.2: bridge window [mem pref disabled]
  259. [ 0.906470] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
  260. [ 0.906472] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
  261. [ 0.906475] pci 0000:00:1c.3: bridge window [mem 0xfb400000-0xfb4fffff]
  262. [ 0.906478] pci 0000:00:1c.3: bridge window [mem pref disabled]
  263. [ 0.906482] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
  264. [ 0.906483] pci 0000:00:1c.4: bridge window [io disabled]
  265. [ 0.906486] pci 0000:00:1c.4: bridge window [mem 0xfb300000-0xfb3fffff]
  266. [ 0.906489] pci 0000:00:1c.4: bridge window [mem pref disabled]
  267. [ 0.906493] pci 0000:07:00.0: PCI bridge to [bus 08-08]
  268. [ 0.906496] pci 0000:07:00.0: bridge window [io 0xc000-0xcfff]
  269. [ 0.906502] pci 0000:07:00.0: bridge window [mem 0xfb200000-0xfb2fffff]
  270. [ 0.906507] pci 0000:07:00.0: bridge window [mem pref disabled]
  271. [ 0.906515] pci 0000:00:1c.6: PCI bridge to [bus 07-08]
  272. [ 0.906516] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
  273. [ 0.906520] pci 0000:00:1c.6: bridge window [mem 0xfb200000-0xfb2fffff]
  274. [ 0.906526] pci 0000:00:1c.6: bridge window [mem pref disabled]
  275. [ 0.906532] pci 0000:00:1c.7: PCI bridge to [bus 09-09]
  276. [ 0.906533] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
  277. [ 0.906537] pci 0000:00:1c.7: bridge window [mem 0xfb100000-0xfb1fffff]
  278. [ 0.906539] pci 0000:00:1c.7: bridge window [mem pref disabled]
  279. [ 0.906549] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  280. [ 0.906550] pci 0000:00:01.0: setting latency timer to 64
  281. [ 0.906555] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  282. [ 0.906557] pci 0000:00:1c.0: setting latency timer to 64
  283. [ 0.906561] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
  284. [ 0.906564] pci 0000:00:1c.1: setting latency timer to 64
  285. [ 0.906569] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  286. [ 0.906572] pci 0000:00:1c.2: setting latency timer to 64
  287. [ 0.906577] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
  288. [ 0.906579] pci 0000:00:1c.3: setting latency timer to 64
  289. [ 0.906583] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  290. [ 0.906586] pci 0000:00:1c.4: setting latency timer to 64
  291. [ 0.906589] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  292. [ 0.906592] pci 0000:00:1c.6: setting latency timer to 64
  293. [ 0.906596] pci 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  294. [ 0.906600] pci 0000:07:00.0: setting latency timer to 64
  295. [ 0.906605] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
  296. [ 0.906608] pci 0000:00:1c.7: setting latency timer to 64
  297. [ 0.906610] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
  298. [ 0.906611] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
  299. [ 0.906612] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  300. [ 0.906612] pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000dffff]
  301. [ 0.906613] pci_bus 0000:00: resource 8 [mem 0xe4000000-0xffffffff]
  302. [ 0.906614] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
  303. [ 0.906615] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
  304. [ 0.906616] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
  305. [ 0.906617] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff]
  306. [ 0.906618] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
  307. [ 0.906619] pci_bus 0000:05: resource 1 [mem 0xfb400000-0xfb4fffff]
  308. [ 0.906620] pci_bus 0000:06: resource 1 [mem 0xfb300000-0xfb3fffff]
  309. [ 0.906620] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
  310. [ 0.906621] pci_bus 0000:07: resource 1 [mem 0xfb200000-0xfb2fffff]
  311. [ 0.906622] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
  312. [ 0.906623] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
  313. [ 0.906624] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
  314. [ 0.906625] pci_bus 0000:07: resource 7 [mem 0x000c8000-0x000dffff]
  315. [ 0.906625] pci_bus 0000:07: resource 8 [mem 0xe4000000-0xffffffff]
  316. [ 0.906626] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
  317. [ 0.906627] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff]
  318. [ 0.906628] pci_bus 0000:08: resource 4 [io 0xc000-0xcfff]
  319. [ 0.906629] pci_bus 0000:08: resource 5 [mem 0xfb200000-0xfb2fffff]
  320. [ 0.906630] pci_bus 0000:08: resource 8 [io 0x0000-0x0cf7]
  321. [ 0.906631] pci_bus 0000:08: resource 9 [io 0x0d00-0xffff]
  322. [ 0.906631] pci_bus 0000:08: resource 10 [mem 0x000a0000-0x000bffff]
  323. [ 0.906632] pci_bus 0000:08: resource 11 [mem 0x000c8000-0x000dffff]
  324. [ 0.906633] pci_bus 0000:08: resource 12 [mem 0xe4000000-0xffffffff]
  325. [ 0.906634] pci_bus 0000:09: resource 0 [io 0xb000-0xbfff]
  326. [ 0.906635] pci_bus 0000:09: resource 1 [mem 0xfb100000-0xfb1fffff]
  327. [ 0.906645] NET: Registered protocol family 2
  328. [ 0.906745] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
  329. [ 0.907180] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
  330. [ 0.907885] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  331. [ 0.907971] TCP: Hash tables configured (established 524288 bind 65536)
  332. [ 0.907972] TCP reno registered
  333. [ 0.907979] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  334. [ 0.907998] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  335. [ 0.908051] NET: Registered protocol family 1
  336. [ 0.908094] RPC: Registered udp transport module.
  337. [ 0.908094] RPC: Registered tcp transport module.
  338. [ 0.908095] RPC: Registered tcp NFSv4.1 backchannel transport module.
  339. [ 0.908118] pci 0000:00:1a.0: EHCI: BIOS handoff
  340. [ 1.031414] pci 0000:00:1d.0: EHCI: BIOS handoff
  341. [ 1.154243] pci 0000:01:00.0: Boot video device
  342. [ 1.154306] PCI: CLS 64 bytes, default 64
  343. [ 1.154329] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  344. [ 1.154330] Placing 64MB software IO TLB between ffff8800dabcb000 - ffff8800debcb000
  345. [ 1.154331] software IO TLB at phys 0xdabcb000 - 0xdebcb000
  346. [ 1.155530] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14
  347. [ 1.155532] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14
  348. [ 1.155536] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x14
  349. [ 1.155539] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x14
  350. [ 1.155542] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x14
  351. [ 1.155546] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x14
  352. [ 1.155549] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x14
  353. [ 1.155553] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x14
  354. [ 1.155572] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
  355. [ 1.155652] audit: initializing netlink socket (disabled)
  356. [ 1.155656] type=2000 audit(1304346543.812:1): initialized
  357. [ 1.161655] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  358. [ 1.163110] VFS: Disk quotas dquot_6.5.2
  359. [ 1.163144] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  360. [ 1.163653] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  361. [ 1.163654] Installing knfsd (copyright (C) 1996 [email protected]).
  362. [ 1.163828] NTFS driver 2.1.30 [Flags: R/W].
  363. [ 1.163901] fuse init (API version 7.16)
  364. [ 1.164062] JFS: nTxBlock = 8192, nTxLock = 65536
  365. [ 1.164816] SGI XFS with security attributes, large block/inode numbers, no debug enabled
  366. [ 1.165238] Btrfs loaded
  367. [ 1.165240] msgmni has been set to 15956
  368. [ 1.165285] SELinux: Registering netfilter hooks
  369. [ 1.165458] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  370. [ 1.165459] io scheduler noop registered (default)
  371. [ 1.165510] pcieport 0000:00:01.0: setting latency timer to 64
  372. [ 1.165773] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  373. [ 1.165885] Non-volatile memory driver v1.3
  374. [ 1.166487] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90005d80000, using 5120k, total 5120k
  375. [ 1.166488] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
  376. [ 1.166489] vesafb: scrolling: redraw
  377. [ 1.166490] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  378. [ 1.208246] Console: switching to colour frame buffer device 160x64
  379. [ 1.248322] fb0: VESA VGA frame buffer device
  380. [ 1.248398] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
  381. [ 1.262103] ACPI: Power Button [PWRB]
  382. [ 1.262133] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  383. [ 1.262134] ACPI: Power Button [PWRF]
  384. [ 1.262170] ACPI: acpi_idle registered with cpuidle
  385. [ 1.262283] Monitor-Mwait will be used to enter C-3 state
  386. [ 1.263967] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  387. [ 1.527898] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  388. [ 1.609292] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  389. [ 1.622374] brd: module loaded
  390. [ 1.622713] loop: module loaded
  391. [ 1.622809] ahci 0000:00:1f.2: version 3.0
  392. [ 1.622819] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
  393. [ 1.633682] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
  394. [ 1.633684] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
  395. [ 1.633686] ahci 0000:00:1f.2: setting latency timer to 64
  396. [ 1.643994] scsi0 : ahci
  397. [ 1.644046] scsi1 : ahci
  398. [ 1.644089] scsi2 : ahci
  399. [ 1.644131] scsi3 : ahci
  400. [ 1.644172] scsi4 : ahci
  401. [ 1.644213] scsi5 : ahci
  402. [ 1.644288] ata1: SATA max UDMA/133 abar m2048@0xfb625000 port 0xfb625100 irq 20
  403. [ 1.644290] ata2: SATA max UDMA/133 abar m2048@0xfb625000 port 0xfb625180 irq 20
  404. [ 1.644291] ata3: SATA max UDMA/133 abar m2048@0xfb625000 port 0xfb625200 irq 20
  405. [ 1.644292] ata4: SATA max UDMA/133 abar m2048@0xfb625000 port 0xfb625280 irq 20
  406. [ 1.644294] ata5: SATA max UDMA/133 abar m2048@0xfb625000 port 0xfb625300 irq 20
  407. [ 1.644295] ata6: SATA max UDMA/133 abar m2048@0xfb625000 port 0xfb625380 irq 20
  408. [ 1.644306] ahci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  409. [ 1.644392] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
  410. [ 1.644393] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
  411. [ 1.644400] ahci 0000:05:00.0: setting latency timer to 64
  412. [ 1.644602] scsi6 : ahci
  413. [ 1.644669] scsi7 : ahci
  414. [ 1.644708] ata7: SATA max UDMA/133 abar m512@0xfb410000 port 0xfb410100 irq 19
  415. [ 1.644711] ata8: SATA max UDMA/133 abar m512@0xfb410000 port 0xfb410180 irq 19
  416. [ 1.644720] ahci 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  417. [ 1.644781] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  418. [ 1.644782] ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  419. [ 1.644786] ahci 0000:09:00.0: setting latency timer to 64
  420. [ 1.644967] scsi8 : ahci
  421. [ 1.645012] scsi9 : ahci
  422. [ 1.645051] ata9: SATA max UDMA/133 abar m2048@0xfb115000 port 0xfb115100 irq 19
  423. [ 1.645053] ata10: SATA max UDMA/133 abar m2048@0xfb115000 port 0xfb115180 irq 19
  424. [ 1.645242] sky2: driver version 1.28
  425. [ 1.645262] PPP generic driver version 2.4.2
  426. [ 1.645297] tun: Universal TUN/TAP device driver, 1.6
  427. [ 1.645298] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  428. [ 1.645317] console [netcon0] enabled
  429. [ 1.645318] netconsole: network logging started
  430. [ 1.645323] usbmon: debugfs is not available
  431. [ 1.645324] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  432. [ 1.645325] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
  433. [ 1.645334] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  434. [ 1.645341] ehci_hcd 0000:00:1a.0: setting latency timer to 64
  435. [ 1.645342] ehci_hcd 0000:00:1a.0: EHCI Host Controller
  436. [ 1.645354] drivers/usb/core/inode.c: creating file 'devices'
  437. [ 1.645355] drivers/usb/core/inode.c: creating file '001'
  438. [ 1.645357] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
  439. [ 1.656634] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
  440. [ 1.656637] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
  441. [ 1.656647] ehci_hcd 0000:00:1a.0: support lpm
  442. [ 1.656655] ehci_hcd 0000:00:1a.0: debug port 2
  443. [ 1.656657] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  444. [ 1.660545] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
  445. [ 1.660546] ehci_hcd 0000:00:1a.0: supports USB remote wakeup
  446. [ 1.660553] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfb627000
  447. [ 1.660556] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  448. [ 1.664444] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
  449. [ 1.669619] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  450. [ 1.669626] usb usb1: default language 0x0409
  451. [ 1.669628] usb usb1: udev 1, busnum 1, minor = 0
  452. [ 1.669629] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  453. [ 1.669630] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  454. [ 1.669631] usb usb1: Product: EHCI Host Controller
  455. [ 1.669632] usb usb1: Manufacturer: Linux 2.6.38-gentoo-r3 ehci_hcd
  456. [ 1.669632] usb usb1: SerialNumber: 0000:00:1a.0
  457. [ 1.669663] usb usb1: usb_probe_device
  458. [ 1.669664] usb usb1: configuration #1 chosen from 1 choice
  459. [ 1.669667] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  460. [ 1.669688] hub 1-0:1.0: usb_probe_interface
  461. [ 1.669689] hub 1-0:1.0: usb_probe_interface - got id
  462. [ 1.669690] hub 1-0:1.0: USB hub found
  463. [ 1.669692] hub 1-0:1.0: 2 ports detected
  464. [ 1.669692] hub 1-0:1.0: standalone hub
  465. [ 1.669693] hub 1-0:1.0: no power switching (usb 1.0)
  466. [ 1.669694] hub 1-0:1.0: individual port over-current protection
  467. [ 1.669694] hub 1-0:1.0: power on to power good time: 20ms
  468. [ 1.669696] hub 1-0:1.0: local power source is good
  469. [ 1.669697] hub 1-0:1.0: trying to enable port power on non-switchable hub
  470. [ 1.669708] drivers/usb/core/inode.c: creating file '001'
  471. [ 1.669724] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  472. [ 1.669731] ehci_hcd 0000:00:1d.0: setting latency timer to 64
  473. [ 1.669733] ehci_hcd 0000:00:1d.0: EHCI Host Controller
  474. [ 1.669735] drivers/usb/core/inode.c: creating file '002'
  475. [ 1.669737] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  476. [ 1.676608] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
  477. [ 1.676610] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
  478. [ 1.676617] ehci_hcd 0000:00:1d.0: support lpm
  479. [ 1.676625] ehci_hcd 0000:00:1d.0: debug port 2
  480. [ 1.676627] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  481. [ 1.680511] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
  482. [ 1.680511] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
  483. [ 1.680513] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfb626000
  484. [ 1.680515] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  485. [ 1.684380] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
  486. [ 1.689591] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  487. [ 1.689595] usb usb2: default language 0x0409
  488. [ 1.689598] usb usb2: udev 1, busnum 2, minor = 128
  489. [ 1.689598] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  490. [ 1.689599] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  491. [ 1.689600] usb usb2: Product: EHCI Host Controller
  492. [ 1.689601] usb usb2: Manufacturer: Linux 2.6.38-gentoo-r3 ehci_hcd
  493. [ 1.689602] usb usb2: SerialNumber: 0000:00:1d.0
  494. [ 1.689630] usb usb2: usb_probe_device
  495. [ 1.689630] usb usb2: configuration #1 chosen from 1 choice
  496. [ 1.689633] usb usb2: adding 2-0:1.0 (config #1, interface 0)
  497. [ 1.689654] hub 2-0:1.0: usb_probe_interface
  498. [ 1.689654] hub 2-0:1.0: usb_probe_interface - got id
  499. [ 1.689655] hub 2-0:1.0: USB hub found
  500. [ 1.689656] hub 2-0:1.0: 2 ports detected
  501. [ 1.689657] hub 2-0:1.0: standalone hub
  502. [ 1.689658] hub 2-0:1.0: no power switching (usb 1.0)
  503. [ 1.689658] hub 2-0:1.0: individual port over-current protection
  504. [ 1.689659] hub 2-0:1.0: power on to power good time: 20ms
  505. [ 1.689661] hub 2-0:1.0: local power source is good
  506. [ 1.689661] hub 2-0:1.0: trying to enable port power on non-switchable hub
  507. [ 1.689671] drivers/usb/core/inode.c: creating file '001'
  508. [ 1.689698] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  509. [ 1.689699] ohci_hcd: block sizes: ed 80 td 96
  510. [ 1.689716] uhci_hcd: USB Universal Host Controller Interface driver
  511. [ 1.689780] usbcore: registered new interface driver usblp
  512. [ 1.689781] Initializing USB Mass Storage driver...
  513. [ 1.689799] usbcore: registered new interface driver usb-storage
  514. [ 1.689800] USB Mass Storage support registered.
  515. [ 1.689818] usbcore: registered new interface driver libusual
  516. [ 1.689851] usbcore: registered new interface driver usbserial
  517. [ 1.689852] usbserial: USB Serial Driver core
  518. [ 1.689918] i8042: PNP: No PS/2 controller found. Probing ports directly.
  519. [ 1.692455] serio: i8042 KBD port at 0x60,0x64 irq 1
  520. [ 1.692458] serio: i8042 AUX port at 0x60,0x64 irq 12
  521. [ 1.692515] mousedev: PS/2 mouse device common for all mice
  522. [ 1.692618] input: PC Speaker as /devices/platform/pcspkr/input/input2
  523. [ 1.692641] rtc_cmos 00:04: RTC can wake from S4
  524. [ 1.700598] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
  525. [ 1.700619] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  526. [ 1.700640] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  527. [ 1.700765] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
  528. [ 1.701110] cpuidle: using governor ladder
  529. [ 1.701727] cpuidle: using governor menu
  530. [ 1.702202] usbcore: registered new interface driver usbhid
  531. [ 1.702203] usbhid: USB HID core driver
  532. [ 1.702463] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  533. [ 1.702479] HDA Intel 0000:00:1b.0: setting latency timer to 64
  534. [ 1.714763] hda_codec: ALC892: BIOS auto-probing.
  535. [ 1.720302] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  536. [ 1.720303] hda_intel: Disable MSI for Nvidia chipset
  537. [ 1.720317] HDA Intel 0000:01:00.1: setting latency timer to 64
  538. [ 1.769583] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
  539. [ 1.769585] hub 1-0:1.0: port 1: status 0501 change 0001
  540. [ 1.789485] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
  541. [ 1.789487] hub 2-0:1.0: port 1: status 0501 change 0001
  542. [ 1.869393] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
  543. [ 1.869398] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
  544. [ 1.920536] ehci_hcd 0000:00:1a.0: port 1 high speed
  545. [ 1.920538] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  546. [ 1.948295] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  547. [ 1.948309] ata5: SATA link down (SStatus 0 SControl 300)
  548. [ 1.948326] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  549. [ 1.948343] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  550. [ 1.949303] ata9: SATA link down (SStatus 0 SControl 330)
  551. [ 1.949339] ata8: SATA link down (SStatus 0 SControl 300)
  552. [ 1.949367] ata10: SATA link down (SStatus 0 SControl 330)
  553. [ 1.949402] ata7: SATA link down (SStatus 0 SControl 300)
  554. [ 1.951311] ata3.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
  555. [ 1.952419] ata2.00: ATA-8: WDC WD2002FAEX-007BA0, 05.01D05, max UDMA/133
  556. [ 1.952423] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  557. [ 1.955172] ata3.00: configured for UDMA/100
  558. [ 1.957413] ata2.00: configured for UDMA/133
  559. [ 1.971298] usb 1-1: new high speed USB device using ehci_hcd and address 2
  560. [ 2.022414] ehci_hcd 0000:00:1a.0: port 1 high speed
  561. [ 2.022417] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  562. [ 2.038122] ALSA device list:
  563. [ 2.038123] #0: HDA Intel PCH at 0xfb620000 irq 22
  564. [ 2.038124] #1: HDA NVidia at 0xfb080000 irq 17
  565. [ 2.038130] Netfilter messages via NETLINK v0.30.
  566. [ 2.038136] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  567. [ 2.038234] ctnetlink v0.93: registering with nfnetlink.
  568. [ 2.038302] IPv4 over IPv4 tunneling driver
  569. [ 2.038570] ip_tables: (C) 2000-2006 Netfilter Core Team
  570. [ 2.038586] TCP cubic registered
  571. [ 2.038587] NET: Registered protocol family 17
  572. [ 2.038593] Registering the dns_resolver key type
  573. [ 2.039010] Magic number: 11:552:484
  574. [ 2.085253] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
  575. [ 2.085258] ehci_hcd 0000:00:1a.0: LPM: no device attached
  576. [ 2.085513] usb 1-1: udev 2, busnum 1, minor = 1
  577. [ 2.085517] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
  578. [ 2.085519] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  579. [ 2.085732] usb 1-1: usb_probe_device
  580. [ 2.085734] usb 1-1: configuration #1 chosen from 1 choice
  581. [ 2.085847] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
  582. [ 2.085902] hub 1-1:1.0: usb_probe_interface
  583. [ 2.085903] hub 1-1:1.0: usb_probe_interface - got id
  584. [ 2.085903] hub 1-1:1.0: USB hub found
  585. [ 2.085969] hub 1-1:1.0: 6 ports detected
  586. [ 2.085969] hub 1-1:1.0: standalone hub
  587. [ 2.085970] hub 1-1:1.0: individual port power switching
  588. [ 2.085971] hub 1-1:1.0: individual port over-current protection
  589. [ 2.085971] hub 1-1:1.0: Single TT
  590. [ 2.085972] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
  591. [ 2.085973] hub 1-1:1.0: power on to power good time: 100ms
  592. [ 2.086251] hub 1-1:1.0: local power source is good
  593. [ 2.086256] hub 1-1:1.0: enabling power on all ports
  594. [ 2.086975] drivers/usb/core/inode.c: creating file '002'
  595. [ 2.086983] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
  596. [ 2.086986] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
  597. [ 2.087407] ata4.00: applying link speed limit horkage to 1.5 Gbps
  598. [ 2.137401] ehci_hcd 0000:00:1d.0: port 1 high speed
  599. [ 2.137403] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  600. [ 2.155080] Refined TSC clocksource calibration: 3502.639 MHz.
  601. [ 2.155084] Switching to clocksource tsc
  602. [ 2.186736] usb 1-1: link qh256-0001/ffff8802168ef300 start 1 [1/0 us]
  603. [ 2.188008] usb 2-1: new high speed USB device using ehci_hcd and address 2
  604. [ 2.239153] ehci_hcd 0000:00:1d.0: port 1 high speed
  605. [ 2.239155] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  606. [ 2.301989] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
  607. [ 2.301995] ehci_hcd 0000:00:1d.0: LPM: no device attached
  608. [ 2.302249] usb 2-1: udev 2, busnum 2, minor = 129
  609. [ 2.302253] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
  610. [ 2.302256] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  611. [ 2.302429] usb 2-1: usb_probe_device
  612. [ 2.302431] usb 2-1: configuration #1 chosen from 1 choice
  613. [ 2.302583] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
  614. [ 2.302659] hub 2-1:1.0: usb_probe_interface
  615. [ 2.302660] hub 2-1:1.0: usb_probe_interface - got id
  616. [ 2.302661] hub 2-1:1.0: USB hub found
  617. [ 2.302705] hub 2-1:1.0: 8 ports detected
  618. [ 2.302706] hub 2-1:1.0: standalone hub
  619. [ 2.302706] hub 2-1:1.0: individual port power switching
  620. [ 2.302707] hub 2-1:1.0: individual port over-current protection
  621. [ 2.302708] hub 2-1:1.0: Single TT
  622. [ 2.302708] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
  623. [ 2.302709] hub 2-1:1.0: power on to power good time: 100ms
  624. [ 2.302987] hub 2-1:1.0: local power source is good
  625. [ 2.302992] hub 2-1:1.0: enabling power on all ports
  626. [ 2.303989] drivers/usb/core/inode.c: creating file '002'
  627. [ 2.304012] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000
  628. [ 2.404126] hub 2-1:1.0: port 3: status 0101 change 0001
  629. [ 2.404340] hub 2-1:1.0: port 4: status 0101 change 0001
  630. [ 2.404891] hub 2-1:1.0: port 7: status 0101 change 0001
  631. [ 2.504635] usb 2-1: link qh256-0001/ffff8802168ef200 start 1 [1/0 us]
  632. [ 2.504652] hub 2-1:1.0: state 7 ports 8 chg 0098 evt 0000
  633. [ 2.504747] hub 2-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
  634. [ 2.515742] hub 2-1:1.0: port 3 not reset yet, waiting 10ms
  635. [ 2.577661] usb 2-1.3: new full speed USB device using ehci_hcd and address 3
  636. [ 2.588652] hub 2-1:1.0: port 3 not reset yet, waiting 10ms
  637. [ 2.662451] usb 2-1.3: ep0 maxpacket = 8
  638. [ 2.665214] usb 2-1.3: skipped 1 descriptor after interface
  639. [ 2.665580] usb 2-1.3: default language 0x0409
  640. [ 2.666686] usb 2-1.3: udev 3, busnum 2, minor = 130
  641. [ 2.666690] usb 2-1.3: New USB device found, idVendor=1532, idProduct=0016
  642. [ 2.666693] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  643. [ 2.666695] usb 2-1.3: Product: Razer DeathAdder
  644. [ 2.666697] usb 2-1.3: Manufacturer: Razer
  645. [ 2.666881] usb 2-1.3: usb_probe_device
  646. [ 2.666883] usb 2-1.3: configuration #1 chosen from 1 choice
  647. [ 2.667213] usb 2-1.3: adding 2-1.3:1.0 (config #1, interface 0)
  648. [ 2.667369] usbhid 2-1.3:1.0: usb_probe_interface
  649. [ 2.667370] usbhid 2-1.3:1.0: usb_probe_interface - got id
  650. [ 2.669156] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input3
  651. [ 2.669226] generic-usb 0003:1532:0016.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:1d.0-1.3/input0
  652. [ 2.669234] drivers/usb/core/inode.c: creating file '003'
  653. [ 2.669390] hub 2-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
  654. [ 2.680545] hub 2-1:1.0: port 4 not reset yet, waiting 10ms
  655. [ 2.742475] usb 2-1.4: new high speed USB device using ehci_hcd and address 4
  656. [ 2.753453] hub 2-1:1.0: port 4 not reset yet, waiting 10ms
  657. [ 2.828758] usb 2-1.4: default language 0x0409
  658. [ 2.829138] usb 2-1.4: udev 4, busnum 2, minor = 131
  659. [ 2.829142] usb 2-1.4: New USB device found, idVendor=05e3, idProduct=0607
  660. [ 2.829145] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  661. [ 2.829148] usb 2-1.4: Product: USB2.0 Hub
  662. [ 2.829327] usb 2-1.4: usb_probe_device
  663. [ 2.829329] usb 2-1.4: configuration #1 chosen from 1 choice
  664. [ 2.829618] usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0)
  665. [ 2.829785] hub 2-1.4:1.0: usb_probe_interface
  666. [ 2.829786] hub 2-1.4:1.0: usb_probe_interface - got id
  667. [ 2.829787] hub 2-1.4:1.0: USB hub found
  668. [ 2.830071] hub 2-1.4:1.0: 4 ports detected
  669. [ 2.830072] hub 2-1.4:1.0: standalone hub
  670. [ 2.830073] hub 2-1.4:1.0: ganged power switching
  671. [ 2.830073] hub 2-1.4:1.0: global over-current protection
  672. [ 2.830372] hub 2-1.4:1.0: TT per port
  673. [ 2.830377] hub 2-1.4:1.0: TT requires at most 32 FS bit times (2664 ns)
  674. [ 2.830379] hub 2-1.4:1.0: Port indicators are supported
  675. [ 2.830381] hub 2-1.4:1.0: power on to power good time: 100ms
  676. [ 2.830636] hub 2-1.4:1.0: hub controller current requirement: 100mA
  677. [ 2.830640] hub 2-1.4:1.0: 100mA bus power budget for each child
  678. [ 2.831011] hub 2-1.4:1.0: local power source is lost (inactive)
  679. [ 2.831016] hub 2-1.4:1.0: no over-current condition exists
  680. [ 2.831018] hub 2-1.4:1.0: enabling power on all ports
  681. [ 2.832492] drivers/usb/core/inode.c: creating file '004'
  682. [ 2.832579] hub 2-1:1.0: port 7, status 0101, change 0000, 12 Mb/s
  683. [ 2.843348] hub 2-1:1.0: port 7 not reset yet, waiting 10ms
  684. [ 2.905265] usb 2-1.7: new full speed USB device using ehci_hcd and address 5
  685. [ 2.916257] hub 2-1:1.0: port 7 not reset yet, waiting 10ms
  686. [ 2.932515] hub 2-1.4:1.0: port 1: status 0301 change 0001
  687. [ 2.933378] hub 2-1.4:1.0: port 3: status 0301 change 0001
  688. [ 2.990751] usb 2-1.7: udev 5, busnum 2, minor = 132
  689. [ 2.990753] usb 2-1.7: New USB device found, idVendor=0cf3, idProduct=3000
  690. [ 2.990754] usb 2-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  691. [ 2.990839] usb 2-1.7: usb_probe_device
  692. [ 2.990840] usb 2-1.7: configuration #1 chosen from 1 choice
  693. [ 2.991001] usb 2-1.7: adding 2-1.7:1.0 (config #1, interface 0)
  694. [ 2.991036] drivers/usb/core/inode.c: creating file '005'
  695. [ 2.991154] hub 2-1:1.0: state 7 ports 8 chg 0000 evt fe80
  696. [ 3.032999] usb 2-1.4: link qh256-0001/ffff88021550d100 start 2 [1/0 us]
  697. [ 3.033013] hub 2-1.4:1.0: state 7 ports 4 chg 000a evt 0000
  698. [ 3.033394] hub 2-1.4:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
  699. [ 3.096319] usb 2-1.4.1: new low speed USB device using ehci_hcd and address 6
  700. [ 3.108299] hub 2-1.4:1.0: port 1 not reset yet, waiting 10ms
  701. [ 3.186461] usb 2-1.4.1: skipped 1 descriptor after interface
  702. [ 3.186466] usb 2-1.4.1: skipped 1 descriptor after interface
  703. [ 3.186921] usb 2-1.4.1: default language 0x0409
  704. [ 3.189180] usb 2-1.4.1: udev 6, busnum 2, minor = 133
  705. [ 3.189184] usb 2-1.4.1: New USB device found, idVendor=046d, idProduct=c22b
  706. [ 3.189187] usb 2-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  707. [ 3.189190] usb 2-1.4.1: Product: G110 G-keys
  708. [ 3.189192] usb 2-1.4.1: Manufacturer: LOGITECH
  709. [ 3.189373] usb 2-1.4.1: usb_probe_device
  710. [ 3.189375] usb 2-1.4.1: configuration #1 chosen from 1 choice
  711. [ 3.189817] usb 2-1.4.1: adding 2-1.4.1:1.0 (config #1, interface 0)
  712. [ 3.190023] usbhid 2-1.4.1:1.0: usb_probe_interface
  713. [ 3.190027] usbhid 2-1.4.1:1.0: usb_probe_interface - got id
  714. [ 3.194617] input: LOGITECH G110 G-keys as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.0/input/input4
  715. [ 3.194623] usb 2-1.4.1: link qh8-0601/ffff88021550d280 start 3 [1/2 us]
  716. [ 3.194638] usbhid 2-1.4.1:1.0: looking for a minor, starting at 96
  717. [ 3.194674] generic-usb 0003:046D:C22B.0002: input,hiddev0,hidraw1: USB HID v1.00 Keypad [LOGITECH G110 G-keys] on usb-0000:00:1d.0-1.4.1/input0
  718. [ 3.194684] usb 2-1.4.1: adding 2-1.4.1:1.1 (config #1, interface 1)
  719. [ 3.194705] usbhid 2-1.4.1:1.1: usb_probe_interface
  720. [ 3.194706] usbhid 2-1.4.1:1.1: usb_probe_interface - got id
  721. [ 3.194707] usbhid 2-1.4.1:1.1: couldn't find an input interrupt endpoint
  722. [ 3.195040] drivers/usb/core/inode.c: creating file '006'
  723. [ 3.195047] hub 2-1.4:1.0: 300mA power budget left
  724. [ 3.195378] hub 2-1.4:1.0: port 3, status 0301, change 0000, 1.5 Mb/s
  725. [ 3.258122] usb 2-1.4.3: new low speed USB device using ehci_hcd and address 7
  726. [ 3.270105] hub 2-1.4:1.0: port 3 not reset yet, waiting 10ms
  727. [ 3.347763] usb 2-1.4.3: skipped 1 descriptor after interface
  728. [ 3.347768] usb 2-1.4.3: skipped 1 descriptor after interface
  729. [ 3.348358] usb 2-1.4.3: default language 0x0409
  730. [ 3.350110] usb 2-1.4.3: udev 7, busnum 2, minor = 134
  731. [ 3.350114] usb 2-1.4.3: New USB device found, idVendor=046d, idProduct=c22a
  732. [ 3.350117] usb 2-1.4.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  733. [ 3.350119] usb 2-1.4.3: Product: Gaming Keyboard G110
  734. [ 3.350302] usb 2-1.4.3: usb_probe_device
  735. [ 3.350304] usb 2-1.4.3: configuration #1 chosen from 1 choice
  736. [ 3.350862] usb 2-1.4.3: adding 2-1.4.3:1.0 (config #1, interface 0)
  737. [ 3.351055] usbhid 2-1.4.3:1.0: usb_probe_interface
  738. [ 3.351057] usbhid 2-1.4.3:1.0: usb_probe_interface - got id
  739. [ 3.359792] input: Gaming Keyboard G110 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.3/2-1.4.3:1.0/input/input5
  740. [ 3.359798] usb 2-1.4.3: link qh16-0601/ffff88021550d580 start 4 [1/2 us]
  741. [ 3.359927] generic-usb 0003:046D:C22A.0003: input,hidraw2: USB HID v1.10 Keyboard [Gaming Keyboard G110] on usb-0000:00:1d.0-1.4.3/input0
  742. [ 3.359936] usb 2-1.4.3: adding 2-1.4.3:1.1 (config #1, interface 1)
  743. [ 3.360051] usbhid 2-1.4.3:1.1: usb_probe_interface
  744. [ 3.360052] usbhid 2-1.4.3:1.1: usb_probe_interface - got id
  745. [ 3.365508] input: Gaming Keyboard G110 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.3/2-1.4.3:1.1/input/input6
  746. [ 3.365513] usb 2-1.4.3: link qh16-0601/ffff88021550d680 start 5 [1/2 us]
  747. [ 3.365515] usbhid 2-1.4.3:1.1: looking for a minor, starting at 96
  748. [ 3.365553] generic-usb 0003:046D:C22A.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Gaming Keyboard G110] on usb-0000:00:1d.0-1.4.3/input1
  749. [ 3.365559] drivers/usb/core/inode.c: creating file '007'
  750. [ 3.365566] hub 2-1.4:1.0: 200mA power budget left
  751. [ 3.365570] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0008
  752. [ 6.942450] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  753. [ 6.988833] ata6.00: ATA-7: ST3750640A, 3.AAE, max UDMA/100
  754. [ 6.988837] ata6.00: 1465149168 sectors, multi 16: LBA48
  755. [ 6.993258] ata1: link is slow to respond, please be patient (ready=0)
  756. [ 7.047043] ata6.00: configured for UDMA/100
  757. [ 7.246949] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  758. [ 7.384144] ata4.00: ATA-6: WD My Book, 01.00A01, max UDMA/133
  759. [ 7.384148] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 1)
  760. [ 7.556774] ata4.00: configured for UDMA/133
  761. [ 11.679619] ata1: COMRESET failed (errno=-16)
  762. [ 11.984264] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  763. [ 11.984630] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
  764. [ 11.984632] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
  765. [ 11.984949] ata1.00: configured for UDMA/133
  766. [ 11.985033] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
  767. [ 11.985164] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
  768. [ 11.985183] sd 0:0:0:0: [sda] Write Protect is off
  769. [ 11.985185] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  770. [ 11.985192] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  771. [ 11.985265] sd 0:0:0:0: Attached scsi generic sg0 type 0
  772. [ 11.985375] scsi 1:0:0:0: Direct-Access ATA WDC WD2002FAEX-0 05.0 PQ: 0 ANSI: 5
  773. [ 11.985497] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
  774. [ 11.985521] sd 1:0:0:0: [sdb] Write Protect is off
  775. [ 11.985522] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  776. [ 11.985532] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  777. [ 11.985606] sd 1:0:0:0: Attached scsi generic sg1 type 0
  778. [ 11.985629] sda: sda1 sda2 sda3
  779. [ 11.985785] sd 0:0:0:0: [sda] Attached SCSI disk
  780. [ 11.988977] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL02 PQ: 0 ANSI: 5
  781. [ 11.995496] sdb: sdb1
  782. [ 11.995743] sd 1:0:0:0: [sdb] Attached SCSI disk
  783. [ 11.997435] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  784. [ 11.997439] cdrom: Uniform CD-ROM driver Revision: 3.20
  785. [ 11.997636] sr 2:0:0:0: Attached scsi CD-ROM sr0
  786. [ 11.997757] sr 2:0:0:0: Attached scsi generic sg2 type 5
  787. [ 11.997816] scsi 3:0:0:0: Direct-Access ATA WD My Book 01.0 PQ: 0 ANSI: 5
  788. [ 11.997904] sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
  789. [ 11.997926] sd 3:0:0:0: [sdc] Write Protect is off
  790. [ 11.997928] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  791. [ 11.997935] sd 3:0:0:0: Attached scsi generic sg3 type 0
  792. [ 11.997937] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  793. [ 11.998035] scsi 5:0:0:0: Direct-Access ATA ST3750640A 3.AA PQ: 0 ANSI: 5
  794. [ 11.998113] sd 5:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
  795. [ 11.998138] sd 5:0:0:0: [sdd] Write Protect is off
  796. [ 11.998140] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
  797. [ 11.998149] sd 5:0:0:0: Attached scsi generic sg4 type 0
  798. [ 11.998151] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  799. [ 12.008005] sdc: sdc1
  800. [ 12.008118] sd 3:0:0:0: [sdc] Attached SCSI disk
  801. [ 12.030159] sdd: sdd1 sdd2 sdd3
  802. [ 12.030623] sd 5:0:0:0: [sdd] Attached SCSI disk
  803. [ 12.030633] md: Waiting for all devices to be available before autodetect
  804. [ 12.030634] md: If you don't use raid, use raid=noautodetect
  805. [ 12.030725] md: Autodetecting RAID arrays.
  806. [ 12.030726] md: Scanned 0 and added 0 devices.
  807. [ 12.030726] md: autorun ...
  808. [ 12.030727] md: ... autorun DONE.
  809. [ 12.034140] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
  810. [ 12.034146] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
  811. [ 12.034636] Freeing unused kernel memory: 588k freed
  812. [ 12.489316] udev: starting version 151
  813. [ 12.489345] udevd (4447): /proc/4447/oom_adj is deprecated, please use /proc/4447/oom_score_adj instead.
  814. [ 12.511074] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  815. [ 12.511087] r8169 0000:08:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  816. [ 12.511121] r8169 0000:08:02.0: (unregistered net_device): no PCI Express capability
  817. [ 12.511289] r8169 0000:08:02.0: eth0: RTL8169sc/8110sc at 0xffffc900062a6000, bc:ae:c5:b6:6d:db, XID 18000000 IRQ 16
  818. [ 12.511433] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  819. [ 12.511448] xhci_hcd 0000:03:00.0: setting latency timer to 64
  820. [ 12.511451] xhci_hcd 0000:03:00.0: xHCI Host Controller
  821. [ 12.511455] drivers/usb/core/inode.c: creating file '003'
  822. [ 12.511459] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
  823. [ 12.514055] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
  824. [ 12.514057] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
  825. [ 12.514070] e1000e 0000:00:19.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  826. [ 12.514075] e1000e 0000:00:19.0: setting latency timer to 64
  827. [ 12.514135] e1000e 0000:00:19.0: (unregistered net_device): Failed to initialize MSI interrupts. Falling back to legacy interrupts.
  828. [ 12.516076] Bluetooth: Atheros AR30xx firmware driver ver 1.0
  829. [ 12.516086] ath3k 2-1.7:1.0: usb_probe_interface
  830. [ 12.516088] ath3k 2-1.7:1.0: usb_probe_interface - got id
  831. [ 12.523735] firewire_ohci 0000:08:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  832. [ 12.524666] xhci_hcd 0000:03:00.0: supports USB remote wakeup
  833. [ 12.524672] xhci_hcd 0000:03:00.0: irq 17, io mem 0xfb500000
  834. [ 12.524674] xhci_hcd 0000:03:00.0: Failed to enable MSI-X
  835. [ 12.524676] xhci_hcd 0000:03:00.0: failed to allocate MSI entry
  836. [ 12.528513] ath3k: probe of 2-1.7:1.0 failed with error -5
  837. [ 12.528527] usbcore: registered new interface driver ath3k
  838. [ 12.529192] usb usb3: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
  839. [ 12.529195] usb usb3: default language 0x0409
  840. [ 12.529199] usb usb3: udev 1, busnum 3, minor = 256
  841. [ 12.529200] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
  842. [ 12.529202] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  843. [ 12.529203] usb usb3: Product: xHCI Host Controller
  844. [ 12.529204] usb usb3: Manufacturer: Linux 2.6.38-gentoo-r3 xhci_hcd
  845. [ 12.529205] usb usb3: SerialNumber: 0000:03:00.0
  846. [ 12.529247] usb usb3: usb_probe_device
  847. [ 12.529249] usb usb3: configuration #1 chosen from 1 choice
  848. [ 12.529252] xHCI xhci_add_endpoint called for root hub
  849. [ 12.529253] xHCI xhci_check_bandwidth called for root hub
  850. [ 12.529257] usb usb3: adding 3-0:1.0 (config #1, interface 0)
  851. [ 12.529276] hub 3-0:1.0: usb_probe_interface
  852. [ 12.529277] hub 3-0:1.0: usb_probe_interface - got id
  853. [ 12.529278] hub 3-0:1.0: USB hub found
  854. [ 12.529281] hub 3-0:1.0: 4 ports detected
  855. [ 12.529282] hub 3-0:1.0: standalone hub
  856. [ 12.529283] hub 3-0:1.0: individual port power switching
  857. [ 12.529284] hub 3-0:1.0: individual port over-current protection
  858. [ 12.529286] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
  859. [ 12.529287] hub 3-0:1.0: power on to power good time: 20ms
  860. [ 12.529290] hub 3-0:1.0: local power source is good
  861. [ 12.529291] hub 3-0:1.0: enabling power on all ports
  862. [ 12.529342] drivers/usb/core/inode.c: creating file '001'
  863. [ 12.529380] xhci_hcd 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  864. [ 12.529403] xhci_hcd 0000:06:00.0: setting latency timer to 64
  865. [ 12.529406] xhci_hcd 0000:06:00.0: xHCI Host Controller
  866. [ 12.529409] drivers/usb/core/inode.c: creating file '004'
  867. [ 12.529413] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
  868. [ 12.535693] xhci_hcd 0000:06:00.0: supports USB remote wakeup
  869. [ 12.535705] xhci_hcd 0000:06:00.0: irq 16, io mem 0xfb300000
  870. [ 12.535710] xhci_hcd 0000:06:00.0: Failed to enable MSI-X
  871. [ 12.535711] xhci_hcd 0000:06:00.0: failed to allocate MSI entry
  872. [ 12.539033] usb usb4: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
  873. [ 12.539036] usb usb4: default language 0x0409
  874. [ 12.539039] usb usb4: udev 1, busnum 4, minor = 384
  875. [ 12.539040] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  876. [ 12.539041] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  877. [ 12.539042] usb usb4: Product: xHCI Host Controller
  878. [ 12.539043] usb usb4: Manufacturer: Linux 2.6.38-gentoo-r3 xhci_hcd
  879. [ 12.539044] usb usb4: SerialNumber: 0000:06:00.0
  880. [ 12.539082] usb usb4: usb_probe_device
  881. [ 12.539084] usb usb4: configuration #1 chosen from 1 choice
  882. [ 12.539085] xHCI xhci_add_endpoint called for root hub
  883. [ 12.539086] xHCI xhci_check_bandwidth called for root hub
  884. [ 12.539089] usb usb4: adding 4-0:1.0 (config #1, interface 0)
  885. [ 12.539099] hub 4-0:1.0: usb_probe_interface
  886. [ 12.539100] hub 4-0:1.0: usb_probe_interface - got id
  887. [ 12.539101] hub 4-0:1.0: USB hub found
  888. [ 12.539103] hub 4-0:1.0: 4 ports detected
  889. [ 12.539103] hub 4-0:1.0: standalone hub
  890. [ 12.539104] hub 4-0:1.0: individual port power switching
  891. [ 12.539105] hub 4-0:1.0: individual port over-current protection
  892. [ 12.539106] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
  893. [ 12.539107] hub 4-0:1.0: power on to power good time: 20ms
  894. [ 12.539108] hub 4-0:1.0: local power source is good
  895. [ 12.539109] hub 4-0:1.0: enabling power on all ports
  896. [ 12.539154] drivers/usb/core/inode.c: creating file '001'
  897. [ 12.576574] firewire_ohci: Added fw-ohci device 0000:08:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
  898. [ 12.585608] nvidia: module license 'NVIDIA' taints kernel.
  899. [ 12.585609] Disabling lock debugging due to kernel taint
  900. [ 12.628571] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000
  901. [ 12.638439] hub 4-0:1.0: state 7 ports 4 chg 0000 evt 0000
  902. [ 12.895311] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  903. [ 12.895315] nvidia 0000:01:00.0: setting latency timer to 64
  904. [ 12.895318] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
  905. [ 12.895365] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.03 Sat Apr 9 00:06:19 PDT 2011
  906. [ 12.993532] e1000e 0000:00:19.0: eth1: (PCI Express:2.5GB/s:Width x1) bc:ae:c5:b6:74:92
  907. [ 12.993534] e1000e 0000:00:19.0: eth1: Intel(R) PRO/1000 Network Connection
  908. [ 12.993563] e1000e 0000:00:19.0: eth1: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
  909. [ 13.076945] firewire_core: created device fw0: GUID 001e8c00003d7db3, S400
  910. [ 13.614752] vboxdrv: Found 8 processor cores.
  911. [ 13.614778] VBoxDrv: dbg - g_abExecMemory=ffffffffa0bd3fa0
  912. [ 13.614901] vboxdrv: fAsync=0 offMin=0x1ba offMax=0x14ce7
  913. [ 13.614919] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
  914. [ 13.614920] vboxdrv: Successfully loaded version 4.0.6 (interface 0x00180000).
  915. [ 13.791880] EXT4-fs (sda3): re-mounted. Opts: discard
  916. [ 13.853482] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
  917. [ 13.881622] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
  918. [ 13.909556] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
  919. [ 13.956995] Adding 4104600k swap on /dev/sda2. Priority:-1 extents:1 across:4104600k SS
  920. [ 14.119549] vboxguest: VirtualBox Guest PCI device not found.
  921. [ 14.133102] vboxguest: VirtualBox Guest PCI device not found.
  922. [ 14.137519] vboxsf: Unknown symbol VBoxGuest_RTMemTmpFree (err 0)
  923. [ 14.137587] vboxsf: Unknown symbol VBoxGuestIDCCall (err 0)
  924. [ 14.137687] vboxsf: Unknown symbol VBoxGuest_RTSemFastMutexRequest (err 0)
  925. [ 14.137760] vboxsf: Unknown symbol VBoxGuest_RTSemFastMutexRelease (err 0)
  926. [ 14.137827] vboxsf: Unknown symbol VBoxGuest_RTErrConvertToErrno (err 0)
  927. [ 14.137911] vboxsf: Unknown symbol VBoxGuest_RTSemFastMutexCreate (err 0)
  928. [ 14.137963] vboxsf: Unknown symbol VBoxGuest_RTSemFastMutexDestroy (err 0)
  929. [ 14.138027] vboxsf: Unknown symbol VBoxGuest_RTLogRelDefaultInstance (err 0)
  930. [ 14.138079] vboxsf: Unknown symbol VBoxGuest_RTMemContFree (err 0)
  931. [ 14.138149] vboxsf: Unknown symbol VBoxGuestIDCOpen (err 0)
  932. [ 14.138217] vboxsf: Unknown symbol VBoxGuest_RTAssertShouldPanic (err 0)
  933. [ 14.138280] vboxsf: Unknown symbol VBoxGuest_RTLogLoggerEx (err 0)
  934. [ 14.138339] vboxsf: Unknown symbol VBoxGuest_RTMemContAlloc (err 0)
  935. [ 14.138411] vboxsf: Unknown symbol VBoxGuest_RTMemTmpAllocTag (err 0)
  936. [ 14.138482] vboxsf: Unknown symbol VBoxGuest_RTAssertMsg1Weak (err 0)
  937. [ 14.138544] vboxsf: Unknown symbol VBoxGuestIDCClose (err 0)
  938. [ 14.138613] vboxsf: Unknown symbol VBoxGuest_RTAssertMsg2Weak (err 0)
  939. [ 14.433720] r8169 0000:08:02.0: eth0: link down
  940. [ 14.639161] ioremap error for 0xdf01b000-0xdf01c000, requested 0x10, got 0x0
  941. [ 15.211301] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=0
  942. [ 15.463955] HDMI hot plug event: Pin=5 Presence_Detect=0 ELD_Valid=1
  943. [ 15.619925] usb 2-1.3: link qh2-0601/ffff88021550d380 start 0 [1/2 us]
  944. [ 15.753681] HDMI: detected monitor SMFX2490HD
  945. [ 15.753682] at connection type HDMI
  946. [ 15.753685] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20 24
  947. [ 16.078309] r8169 0000:08:02.0: eth0: link up
  948. [ 17.653911] ata1.00: configured for UDMA/133
  949. [ 17.653913] ata1: EH complete
  950. [ 18.027709] ata2.00: configured for UDMA/133
  951. [ 18.027711] ata2: EH complete
  952. [ 18.474130] ata4.00: configured for UDMA/133
  953. [ 18.474134] ata4: EH complete
  954. [ 19.045757] ata6.00: configured for UDMA/100
  955. [ 19.045759] ata6: EH complete
  956. [ 19.098834] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
  957. [ 19.107320] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0
  958. [ 21.814543] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
  959. [ 22.160260] EXT4-fs (sdb1): re-mounted. Opts: commit=0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!