[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14.40-ti-r62 (root@a4-imx6q-wandboard-2gb) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Thu Apr 30 18:28:06 UTC 2015
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI AM335x BeagleBone Black
[    0.000000] cma: CMA: reserved 24 MiB at 9e000000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 130560
[    0.000000] free_area_init_node: node 0, pgdat c0d36cc0, node_mem_map df9ee000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 130560 pages, LIFO batch:31
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] PERCPU: Embedded 9 pages/cpu @df9b3000 s14208 r8192 d14464 u36864
[    0.000000] pcpu-alloc: s14208 r8192 d14464 u36864 alloc=9*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129536
[    0.000000] Kernel command line: console=tty0 console=ttyO0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait fixrtc quiet init=/lib/systemd/systemd
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] allocated 1048576 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 473832K/522240K available (9043K kernel code, 701K rwdata, 3260K rodata, 601K init, 744K bss, 48408K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc0c0c044   (12305 kB)
      .init : 0xc0c0d000 - 0xc0ca3780   ( 602 kB)
      .data : 0xc0ca4000 - 0xc0d534c4   ( 702 kB)
       .bss : 0xc0d534c4 - 0xc0e0d768   ( 745 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[    0.000039] OMAP clocksource: timer1 at 24000000 Hz
[    0.000389] Console: colour dummy device 80x30
[    0.000545] console [tty0] enabled
[    0.000568] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000603] This ensures that you still see kernel messages. Please
[    0.000631] update your kernel commandline.
[    0.000667] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
[    0.088471] pid_max: default: 32768 minimum: 301
[    0.088624] Security Framework initialized
[    0.088708] AppArmor: AppArmor disabled by boot time parameter
[    0.088718] Yama: becoming mindful.
[    0.088808] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.088821] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.135218] Initializing cgroup subsys memory
[    0.135277] Initializing cgroup subsys devices
[    0.135290] Initializing cgroup subsys freezer
[    0.135301] Initializing cgroup subsys net_cls
[    0.135311] Initializing cgroup subsys blkio
[    0.135321] Initializing cgroup subsys perf_event
[    0.135337] Initializing cgroup subsys net_prio
[    0.135446] CPU: Testing write buffer coherency: ok
[    0.135516] ftrace: allocating 31427 entries in 93 pages
[    0.223458] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.223529] Setting up static identity map for 0x808db030 - 0x808db088
[    0.278478] Brought up 1 CPUs
[    0.278504] SMP: Total of 1 processors activated (996.14 BogoMIPS).
[    0.278513] CPU: All CPU(s) started in SVC mode.
[    0.279452] devtmpfs: initialized
[    0.283746] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.300723] omap_hwmod: tptc0 using broken dt data from edma
[    0.300903] omap_hwmod: tptc1 using broken dt data from edma
[    0.301057] omap_hwmod: tptc2 using broken dt data from edma
[    0.306078] omap_hwmod: debugss: _wait_target_disable failed
[    0.366997] xor: measuring software checksum speed
[    0.458434]    arm4regs  :  1244.400 MB/sec
[    0.558426]    8regs     :  1112.000 MB/sec
[    0.658428]    32regs    :  1109.600 MB/sec
[    0.758426]    neon      :  1707.600 MB/sec
[    0.758435] xor: using function: neon (1707.600 MB/sec)
[    0.758458] pinctrl core: initialized pinctrl subsystem
[    0.759047] regulator-dummy: no parameters
[    0.760862] NET: Registered protocol family 16
[    0.763233] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.763887] cpuidle: using governor ladder
[    0.763902] cpuidle: using governor menu
[    0.769152] syscon 44e10000.control_module: regmap [mem 0x44e10000-0x44e107fb] registered
[    0.770042] syscon 44e10000.syscon: regmap [mem 0x44e10000-0x44e107ff] registered
[    0.770671] platform 49000000.edma: alias fck already exists
[    0.770694] platform 49000000.edma: alias fck already exists
[    0.770708] platform 49000000.edma: alias fck already exists
[    0.771621] OMAP GPIO hardware version 0.1
[    0.790979] No ATAGs?
[    0.791005] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.802085] bio: create slab <bio-0> at 0
[    0.968647] raid6: int32x1    231 MB/s
[    1.138468] raid6: int32x2    304 MB/s
[    1.308612] raid6: int32x4    283 MB/s
[    1.478602] raid6: int32x8    282 MB/s
[    1.648451] raid6: neonx1    1450 MB/s
[    1.818442] raid6: neonx2    1882 MB/s
[    1.988444] raid6: neonx4    1933 MB/s
[    2.158446] raid6: neonx8     807 MB/s
[    2.158454] raid6: using algorithm neonx4 (1933 MB/s)
[    2.158462] raid6: using intx1 recovery algorithm
[    2.168592] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    2.169409] vbat: 5000 mV
[    2.169714] vmmcsd_fixed: 3300 mV
[    2.172295] i2c-core: driver [palmas] using legacy suspend method
[    2.172307] i2c-core: driver [palmas] using legacy resume method
[    2.172700] SCSI subsystem initialized
[    2.173090] libata version 3.00 loaded.
[    2.173418] usbcore: registered new interface driver usbfs
[    2.173493] usbcore: registered new interface driver hub
[    2.173701] usbcore: registered new device driver usb
[    2.174204] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe
[    2.174233] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral
[    2.177430] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[    2.177795] pps_core: LinuxPPS API ver. 1 registered
[    2.177807] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    2.177832] PTP clock support registered
[    2.179064] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    2.180210] Advanced Linux Sound Architecture Driver Initialized.
[    2.181207] Switched to clocksource timer1
[    2.277823] NET: Registered protocol family 2
[    2.278868] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    2.278919] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    2.278979] TCP: Hash tables configured (established 4096 bind 4096)
[    2.279054] TCP: reno registered
[    2.279069] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    2.279090] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    2.279343] NET: Registered protocol family 1
[    2.279871] RPC: Registered named UNIX socket transport module.
[    2.279885] RPC: Registered udp transport module.
[    2.279892] RPC: Registered tcp transport module.
[    2.279899] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.280574] Unpacking initramfs...
[    2.513921] Freeing initrd memory: 3548K (c8080000 - c83f7000)
[    2.514302] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    2.517155] futex hash table entries: 256 (order: 2, 16384 bytes)
[    2.517359] audit: initializing netlink subsys (disabled)
[    2.517440] audit: type=2000 audit(2.460:1): initialized
[    2.625034] zbud: loaded
[    2.625419] VFS: Disk quotas dquot_6.5.2
[    2.625545] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.626310] NFS: Registering the id_resolver key type
[    2.626400] Key type id_resolver registered
[    2.626410] Key type id_legacy registered
[    2.626430] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.626775] fuse init (API version 7.22)
[    2.627015] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    2.627818] msgmni has been set to 980
[    2.630067] NET: Registered protocol family 38
[    2.630189] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    2.630416] io scheduler noop registered
[    2.630428] io scheduler deadline registered
[    2.630466] io scheduler cfq registered (default)
[    2.632243] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    2.636980] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    2.641500] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a 8250
[    2.659183] console [ttyS0] enabled
[    2.660185] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 90, base_baud = 3000000) is a 8250
[    2.662760] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
[    2.663014] [drm] Initialized drm 1.1.0 20060810
[    2.663235] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.663291] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.663338] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.663386] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.669209] bone-pinmux-helper P9_19_pinmux.23: Set initial pinmux mode to i2c
[    2.669698] bone-pinmux-helper P9_20_pinmux.24: Set initial pinmux mode to i2c
[    2.670315] bone-pinmux-helper P9_21_pinmux.25: Set initial pinmux mode to uart
[    2.670951] bone-pinmux-helper P9_22_pinmux.26: Set initial pinmux mode to uart
[    2.686119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.686157] ehci-omap: OMAP-EHCI Host Controller driver
[    2.686744] usbcore: registered new interface driver usb-storage
[    2.688913] 47401300.usb-phy supply vcc not found, using dummy regulator
[    2.724033] musb-hdrc musb-hdrc.0.auto: Failed to request rx1.
[    2.730013] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517
[    2.737961] platform musb-hdrc.0.auto: Driver musb-hdrc requests probe deferral
[    2.738922] 47401b00.usb-phy supply vcc not found, using dummy regulator
[    2.813831] musb-hdrc musb-hdrc.1.auto: Failed to request rx1.
[    2.819799] musb-hdrc musb-hdrc.1.auto: musb_init_controller failed with status -517
[    2.827729] platform musb-hdrc.1.auto: Driver musb-hdrc requests probe deferral
[    2.837276] mousedev: PS/2 mouse device common for all mice
[    2.838041] TI-am335x-tsc TI-am335x-tsc: ti,charge-delay not specified
[    2.838401] input: ti-tsc as /devices/ocp.3/44e0d000.tscadc/TI-am335x-tsc/input/input0
[    2.839284] i2c-core: driver [rtc-ds1307] using legacy suspend method
[    2.839298] i2c-core: driver [rtc-ds1307] using legacy resume method
[    2.840362] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    2.840428] 44e3e000.rtc: already running
[    2.841128] i2c /dev entries driver
[    2.843432] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    2.953544] pinctrl-single 44e10800.pinmux: pin 44e10890.0 already requested by P8_07_pinmux.4; cannot claim for cube-gpio.44
[    2.965165] pinctrl-single 44e10800.pinmux: pin-36 (cube-gpio.44) status -22
[    2.972338] pinctrl-single 44e10800.pinmux: could not request pin 36 (44e10890.0) from group pinmux_gpio_out_pins  on device pinctrl-single
[    2.984988] leds-gpio cube-gpio.44: Error applying setting, reverse things back
[    2.993713] ledtrig-cpu: registered to indicate activity on CPUs
[    2.994309] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    2.996434] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    2.998251] hidraw: raw HID events driver (C) Jiri Kosina
[    2.999329] usbcore: registered new interface driver usbhid
[    2.999342] usbhid: USB HID core driver
[    3.000222] ashmem: initialized
[    3.001079] platform 44d00000.wkup_m3: Driver wkup_m3 requests probe deferral
[    3.002812] mmc0: host does not support reading read-only switch. assuming write-enable.
[    3.004860] oprofile: using arm/armv7
[    3.005185] TCP: cubic registered
[    3.005244] NET: Registered protocol family 10
[    3.006501] mmc0: new high speed SDHC card at address aaaa
[    3.007547] mip6: Mobile IPv6
[    3.007577] NET: Registered protocol family 17
[    3.007705] Key type dns_resolver registered
[    3.007717] mpls_gso: MPLS GSO support
[    3.008646] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517
[    3.008665] cpu cpu0: cpu0 clock notifier not ready, retry
[    3.014480] mmcblk0: mmc0:aaaa SS04G 3.69 GiB
[    3.015418] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral
[    3.016635]  mmcblk0: p1 p2
[    3.017828] PM: bootloader does not support rtc-only!
[    3.017852] ThumbEE CPU extension supported.
[    3.017893] Registering SWP/SWPB emulation handler
[    3.021974] registered taskstats version 1
[    3.022401] bio: create slab <bio-1> at 1
[    3.023053] Btrfs loaded
[    3.023200] vbat: disabling
[    3.023212] regulator-dummy: disabling
[    3.023871] Error: Driver 'tfp410' is already registered, aborting...
[    3.033890] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.033906] [drm] No driver support for vblank timestamp query.
[    3.064902] mmc1: BKOPS_EN bit is not set
[    3.069998] mmc1: new high speed MMC card at address 0001
[    3.070890] mmcblk1: mmc1:0001 MMC04G 3.60 GiB
[    3.071160] mmcblk1boot0: mmc1:0001 MMC04G partition 1 2.00 MiB
[    3.071471] mmcblk1boot1: mmc1:0001 MMC04G partition 2 2.00 MiB
[    3.072651]  mmcblk1: p1 p2
[    3.074785]  mmcblk1boot1: unknown partition table
[    3.076298]  mmcblk1boot0: unknown partition table
[    3.083415] Console: switching to colour frame buffer device 80x30
[    3.085398] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    3.085410] tilcdc 4830e000.lcdc: registered panic notifier
[    3.085431] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    3.094783] input: tps65217_pwr_but as /devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input1
[    3.096926] DCDC1: at 1500 mV
[    3.098087] vdd_mpu: 925 <--> 1375 mV at 1325 mV
[    3.099160] vdd_core: 925 <--> 1150 mV at 1125 mV
[    3.100218] LDO1: at 1800 mV
[    3.101416] LDO2: at 3300 mV
[    3.102523] LDO3: 1800 mV
[    3.103599] LDO4: at 3300 mV
[    3.104818] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[    3.110486] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    3.110562] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    3.120188] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    3.120213] musb-hdrc: MHDRC RTL version 2.0
[    3.120222] musb-hdrc: setup fifo_mode 4
[    3.120238] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    3.130032] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    3.130056] musb-hdrc: MHDRC RTL version 2.0
[    3.130066] musb-hdrc: setup fifo_mode 4
[    3.130082] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    3.130205] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    3.130625] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    3.130904] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.130941] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.130953] usb usb1: Product: MUSB HDRC host driver
[    3.130964] usb usb1: Manufacturer: Linux 3.14.40-ti-r62 musb-hcd
[    3.130975] usb usb1: SerialNumber: musb-hdrc.1.auto
[    3.132142] hub 1-0:1.0: USB hub found
[    3.132211] hub 1-0:1.0: 1 port detected
[    3.162251]  remoteproc0: wkup_m3 is available
[    3.162272]  remoteproc0: Note: remoteproc is still under development and considered experimental.
[    3.162281]  remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    3.163341]  remoteproc0: powering up wkup_m3
[    3.163419] cpu cpu0: of_pm_voltdm_notifier_register: Fail calculating voltage latency[950000<->1325000]:-22
[    3.178947]  remoteproc0: Booting fw image am335x-pm-firmware.elf, size 219827
[    3.179525] PM: CM3 Firmware Version = 0x190
[    3.179718]  remoteproc0: remote processor wkup_m3 is now up
[    3.221321] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    3.221340] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    3.228188] libphy: 4a101000.mdio: probed
[    3.228226] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    3.229397] cpsw 4a100000.ethernet: Detected MACID = 6c:ec:eb:67:09:d8
[    3.231803] omap_rtc 44e3e000.rtc: setting system clock to 2015-08-05 22:42:04 UTC (1438814524)
[    3.236744] ALSA device list:
[    3.236767]   No soundcards found.
[    3.238593] Freeing unused kernel memory: 600K (c0c0d000 - c0ca3000)
[    3.300478] systemd-udevd[110]: starting version 215
[    3.303643] random: systemd-udevd urandom read with 37 bits of entropy available
[    3.531478] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[    3.671846] usb 1-1: New USB device found, idVendor=0409, idProduct=005a
[    3.671870] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.673190] hub 1-1:1.0: USB hub found
[    3.673288] hub 1-1:1.0: 4 ports detected
[    3.951422] usb 1-1.1: new low-speed USB device number 3 using musb-hdrc
[    4.056798] usb 1-1.1: device v413c p2107 is not supported
[    4.066680] usb 1-1.1: New USB device found, idVendor=413c, idProduct=2107
[    4.066702] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.066713] usb 1-1.1: Product: Dell USB Entry Keyboard
[    4.066723] usb 1-1.1: Manufacturer: DELL
[    4.074736] input: DELL Dell USB Entry Keyboard as /devices/ocp.3/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:413C:2107.0001/input/input2
[    4.076752] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-musb-hdrc.1.auto-1.1/input0
[    4.171464] usb 1-1.3: new low-speed USB device number 4 using musb-hdrc
[    4.275794] usb 1-1.3: device v046d pc077 is not supported
[    4.281501] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c077
[    4.281514] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.281525] usb 1-1.3: Product: USB Optical Mouse
[    4.281535] usb 1-1.3: Manufacturer: Logitech
[    4.287776] input: Logitech USB Optical Mouse as /devices/ocp.3/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C077.0002/input/input3
[    4.289118] hid-generic 0003:046D:C077.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-musb-hdrc.1.auto-1.3/input0
[    9.480249] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    9.864551] random: nonblocking pool is initialized
[   10.239904] systemd[1]: Found ordering cycle on basic.target/start
[   10.239954] systemd[1]: Found dependency on sysinit.target/start
[   10.239975] systemd[1]: Found dependency on console-setup.service/start
[   10.239994] systemd[1]: Found dependency on remote-fs.target/start
[   10.240011] systemd[1]: Found dependency on connman.service/start
[   10.240026] systemd[1]: Found dependency on basic.target/start
[   10.240043] systemd[1]: Breaking ordering cycle by deleting job console-setup.service/start
[   10.240062] systemd[1]: Job console-setup.service/start deleted to break ordering cycle starting with basic.target/start
[   10.594393] usbcore: registered new interface driver rt2870
[   11.097281] systemd-udevd[189]: starting version 215
[   11.414581] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[   13.674826] using random self ethernet address
[   13.674857] using random host ethernet address
[   13.674874] using host ethernet address: 6C:EC:EB:67:09:DA
[   13.674921] using random self ethernet address
[   13.674933] using random host ethernet address
[   13.674948] using host ethernet address: 6C:EC:EB:67:09:DA
[   13.675914] usb0: HOST MAC 6c:ec:eb:67:09:da
[   13.676101] usb0: MAC 5e:6c:ed:ee:a3:8b
[   13.760977] Number of LUNs=8
[   13.761020] Mass Storage Function, version: 2009/09/11
[   13.761033] LUN: removable file: (no medium)
[   13.761057] Number of LUNs=1
[   13.761503] LUN: removable file: /dev/mmcblk0p1
[   13.761518] Number of LUNs=1
[   13.773364] g_multi gadget: Multifunction Composite Gadget
[   13.773397] g_multi gadget: g_multi ready
[   14.176562] net eth0: initializing cpsw version 1.12 (0)
[   14.252181] net eth0: phy found : id is : 0x7c0f1
[   14.252362] libphy: PHY 4a101000.mdio:01 not found
[   14.257291] net eth0: phy 4a101000.mdio:01 not found on slave 1
[   14.371522] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.748175] systemd-journald[187]: Received request to flush runtime journal from PID 1
[   15.684521] pruss-rproc 4a300000.pruss: 8 PRU interrupts parsed
[   15.684622] pruss-rproc 4a300000.pruss: memory    dram0: pa 0x4a300000 size 0x2000 va e0bc4000
[   15.684645] pruss-rproc 4a300000.pruss: memory    dram1: pa 0x4a302000 size 0x2000 va e0bc8000
[   15.684665] pruss-rproc 4a300000.pruss: memory shrdram2: pa 0x4a310000 size 0x3000 va e0bcc000
[   15.684684] pruss-rproc 4a300000.pruss: memory     intc: pa 0x4a320000 size 0x2000 va e0bd0000
[   15.684702] pruss-rproc 4a300000.pruss: memory      cfg: pa 0x4a326000 size 0x2000 va e0bd4000
[   15.684917] pruss-rproc 4a300000.pruss: creating platform devices for PRU cores
[   15.779188] pru-rproc 4a334000.pru0: memory     iram: pa 0x4a334000 size 0x2000 va e0be8000
[   15.779237] pru-rproc 4a334000.pru0: memory  control: pa 0x4a322000 size 0x400 va e088e000
[   15.779263] pru-rproc 4a334000.pru0: memory    debug: pa 0x4a322400 size 0x100 va e09fe400
[   15.779658]  remoteproc1: 4a334000.pru0 is available
[   15.779672]  remoteproc1: Note: remoteproc is still under development and considered experimental.
[   15.779681]  remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[   15.783975]  remoteproc1: failed to load rproc-pru0-fw
[   15.820497] pru-rproc 4a334000.pru0: booting the PRU core manually
[   15.820534]  remoteproc1: powering up 4a334000.pru0
[   15.820630]  remoteproc1: request_firmware failed: -2
[   15.955568] pru-rproc 4a334000.pru0: rproc_boot failed
[   16.015900]  remoteproc1: releasing 4a334000.pru0
[   16.034413] pru-rproc: probe of 4a334000.pru0 failed with error -2
[   16.034729] pru-rproc 4a338000.pru1: memory     iram: pa 0x4a338000 size 0x2000 va e0bf0000
[   16.034774] pru-rproc 4a338000.pru1: memory  control: pa 0x4a324000 size 0x400 va e0bf4000
[   16.034796] pru-rproc 4a338000.pru1: memory    debug: pa 0x4a324400 size 0x100 va e0bf6400
[   16.035195]  remoteproc1: 4a338000.pru1 is available
[   16.035211]  remoteproc1: Note: remoteproc is still under development and considered experimental.
[   16.035220]  remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[   16.035560]  remoteproc1: failed to load rproc-pru1-fw
[   16.050716] pru-rproc 4a338000.pru1: booting the PRU core manually
[   16.050751]  remoteproc1: powering up 4a338000.pru1
[   16.050832]  remoteproc1: request_firmware failed: -2
[   16.107513] pru-rproc 4a338000.pru1: rproc_boot failed
[   16.207062]  remoteproc1: releasing 4a338000.pru1
[   16.215510] pru-rproc: probe of 4a338000.pru1 failed with error -2
[   16.868075] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[   17.331888] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[   17.331967] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   34.699347] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[   34.986315] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   35.298432] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.